SHE-BRIDGE-MIB

File: SHE-BRIDGE-MIB.mib (795533 bytes)

Imported modules

AN-MIB ENTITY-MIB IF-MIB
SHE-ALARMING-MIB SHE-TC-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

she entPhysicalIndex PhysicalIndex
ifIndex InterfaceIndex sheAlarmTimeAndDate
sheAlarmReportingSource sheAlarmReportingSourceType sheAlarmSeverity
SheAlarmSevProfileIndex SheControlStatusType SheEnableType
ShePermissionType SheAdminStateType OBJECT-GROUP
MODULE-COMPLIANCE NOTIFICATION-GROUP TimeTicks
IpAddress Integer32 Unsigned32
Gauge32 Counter32 Counter64
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
TruthValue DisplayString TEXTUAL-CONVENTION

Defined Types

SheBridgeModeType  
INTEGER basicMode(1), diffServMode(2), enhancedMode(3)    

SheBridgeTaggingModeType  
INTEGER singleTag(1), doubleTag(2)    

SheBridgeSharedVlanLearningType  
INTEGER disabled(0), enabled(1)    

SheBridgeMacAntiSpoofingType  
INTEGER disabled(0), enabled(1)    

SheBridgeRoutingModeType  
INTEGER residential(0), unrestricted(1), default(2)    

SheBridgeDlfFilterType  
INTEGER disable(0), enable(1)    

SheBridgeUnknownMulticastFilterType  
INTEGER disable(0), enable(1), enableDs(2), enableUs(3)    

SheBridgeControlRequestType  
INTEGER none(0), noRequest(1), setBridgeMode(101), setBridgeTaggingMode(102), setBridgeMirrorPort(103), setBridgeOuterVlanDefaults(104), setBridgeCircuitIdFormat(105), setBridgeSharedVlanLearning(106), setBridgeRemoteIdFormat(107), setBridgeStagTPID(108), setBridgeMacAntiSpoofing(109), setBridgePortVLANDefaults(110), setBridgePortUsage(111), setBridgePortHostConfigurationProtocol(112), setBridgePortMaxLearnPermitCount(113), setBridgePortMcastGroupPackageList(114), setBridgePortFeature(115), setBridgePortCircuitId(116), setBridgePortRemoteId(117), clearBridgePortCircuitId(118), clearBridgePortRemoteId(119), setBridgeMacProfileSrcMacAddress(120), setBridgePortInnerPVID(121), setBridgeRoutingMode(122), setBridgeMaxHostName(123), setBridgeDlfFilter(124), setBridgeUnknownMulticastFilter(125), setBridgePortInnerPriority(126), setBridgePortIpoaProviderRouterIpAddress(127), setBridgeIpoaArpReqInterval(128), setBridgeIUProfilePPPoASrcMacAddress(131), setBridgeIUProfileUsedMATBasis(132), setBridgeIUProfileReplaceVlanTag(133), setBridgeIUProfileDscpPriorityMapProfileIndex(134), setBridgePortMcastParameter(135), setBridgePortIgmpSubscriberAccessMode(136), setBridgePortPriorityOptions(141), setBridgePortMatEnabled(142), setBridgePortIpAddressPermitCount(143), createBridgePortPrioMapEntry(151), deleteBridgePortPrioMapEntry(152), modifyBridgePortPrioMapEntry(153), setBridgePortExtMCastParameter(162), setBridgePortIpAsMode(165), setBridgePortEtypeVlanMapping(166), createEtypeVlanMapProfEntry(171), modifyEtypeVlanMapProfEntry(172), deleteEtypeVlanMapProfEntry(173), createVlan(201), deleteVlan(202), setVlanName(203), setVlanPorts(204), setVlanMulticastPermission(206), setVlanDhcpProviderIndex(207), setVlanDefaultGateway(208), setVlanPPPoEProviderIndex(209), setVlanMgmtVlan(210), setVlanServiceTagOnly(211), setVlanAgeingTime(212), setVlanRoutingMode(213), setVlanTunnelingL2Protocol(214), setVlanServiceType(215), setVlanDlfFlood(216), addVlanPorts(222), deleteVlanPorts(223), setVlanCCMode(230), setVlanRouted(231), setVlanMcastFlood(232), setVlanMatEnable(233), setVlanTranslation(235), modifySubportServiceName(242), clearRuleMatchCounter(299), modifyRule(300), createRule(301), deleteRule(302), createMeterProfile(303), deleteMeterProfile(304), modifyMeterProfile(305), setFdbBaseAgeingTime(401), setFdbBaseLearningUplink(402), refreshFdbTable(403), createFdbStaticEntry(404), createBcscEntry(501), modifyBcscEntry(502), deleteBcscEntry(503), modifyLagGroupEntry(601), modifyLagPortEntry(602), assignBridgePortToLag(603), unassignBridgePortFromLag(604), setDhcpAdminState(701), createDhcpProviderEntry(702), modifyDhcpProviderEntry(703), deleteDhcpProviderEntry(704), setDhcpRemoteId(705), deleteSnoopEntry(706), ipAntiSpoofingSet(707), ipAntiSpoofingGracePeriodSet(708), setDhcpFloodVlanId(709), setDhcpTagForProtocol(715), setDhcpStationMove(716), setIgmpMode(725), createIgmpProviderEntry(726), modifyIgmpProviderEntry(727), deleteIgmpProviderEntry(728), createIgmpProfileVlanEntry(729), deleteIgmpProfileVlanEntry(730), modifyIgmpProfileVlanDot1p(731), createIgmpGroupEntry(732), modifyIgmpGroupEntry(733), deleteIgmpGroupEntry(734), createIgmpMcastGroupPackageEntry(735), deleteIgmpMcastGroupPackageEntry(736), createPmObject(737), modifyPmObject(738), deletePmObject(739), setIgmpMaxJoinedSubscribers(740), clearIgmpStats(742), setIgmpProviderChannelAdmission(743), setIgmpMcastChannelParameter(744), setIgmpMaxJoinedGroup(745), modifyIgmpProfileVlanForkingMode(746), createIgmpSourceIpAddressEntry(747), deleteIgmpSourceIpAddressEntry(748), setIgmpTagMode(749), modifyMstpBaseStatus(750), modifyMstpBaseConfig(751), modifyMstpBaseConfIdVlanIdList(752), resetMstpTc(753), modifyMstpBridgeParamEntry(754), modifyMstpPortParamEntry(755), resetCistTc(756), modifyCistBridgeParameters(757), modifyCistPortParamEntry(758), setMstpPortBridgeGroupAddress(759), createIgmpBridgePortProviderEntry(763), modifyIgmpBridgePortProviderEntry(764), deleteIgmpBridgePortProviderEntry(765), modifyQueuePriorityMapping(775), modifyReducedQueuePriorityMapping(776), modifyQueueModeEntry(780), modifyQueueWeightEntry(781), configureCardQueueConfigurationEntry(790), deleteCardQueueConfigurationEntry(791), createShapingProfile(795), modifyShapingProfile(796), deleteShapingProfile(797), assignShapingProfile(798), deleteShapingProfileAssignment(799), modifyArpHandling(801), createArpFixedIpAddressEntry(802), modifyArpFixedIpAddressEntry(803), deleteArpFixedIpAddressEntry(804), modifyErpDomainTrafficVlan(825), modifyErpDomainEntry(826), activateErpDomain(827), operatorRequestErpDomain(828), modifyErpDomainGlobalGroup(829), clearQoSPmCounters(850), modifyArpVlanFlood(901), createCebsPortTableEntry(950), deleteCebsPotyTableEntry(951), createCebsStaticGatewayTableEntry(952), modifyCebsStaticGatewayTableEntry(953), deleteCebsStaticGatewayTableEntry(954), createCebsVirtualMacTableEntry(955), deleteCebsVirtualMacTableEntry(956), setExtResidentialMode(990)    

SheBridgeControlReqResultType  
INTEGER none(0), noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), wrongPortVlanIndex(38), noMoreResources(40), parameterConflict(41), vlanServiceTypeConflict(42), featureNotSupportedYet(50), vlanInternalGeneralFailure(2101), vlanCreateFailOnInvalidVlanID(2102), vlanDeleteFailOnInvalidVlanID(2103), vlanModifyFailOnInvalidVlanID(2104), vlanModifyFailOnInvalidParameterRange(2105), vlanModifyFailOnInvalidParameter(2106), vlanInternalFailureOnIuCommunication(2107), vlanInternalFailureOnRestrictedVlanAccess(2108), vlanPortListModifyFailOnInvalidPortId(2109), vlanPortListModifyFail(2110), vlanPortListModifyFailOnOnlyUplinksForMgmtVlan(2111), vlanPortListModifyFailOnRestrictedPortListForCCMode(2112), vlanModifyFailOnWrongServiceTypeSelected(2113), vlanModifyFailOnRestrictedPortListForCCMode(2114), vlanModifyFailOnMaxNumberOfVlanRelationsReachedForPort(2115), vlanMatModifyFailOnDslamIdNotSet(2116), vlanVrBindingModifyFailOnRouterIdNotSet(2117)    

SheBridgePortUsageType  
INTEGER notUsed(1), upLink(2), cascading(3), subscriber(4), aggregated(5), subcascading(6), bondingNotUsed(10), bondingSubscriber(11), bondedSubscriber(12), physbondedSubscriber(13), vccAggregatorNotUsed(20), vccAggregatorUsed(21), vccAggregated(22)    

SheHostConfigurationProtocolType  
INTEGER none(0), useDHCP(1), usePPPoE(2), useDHCPandPPPoE(3)    

SheBridgePortModeType  
INTEGER useIpoE(0), useIpoA(1), usePPPoA(2), useAuto(3)    

SheBridgePortTaggingModeType  
INTEGER off(0), tagged(1), untagged(2)    

SheBridgePortIgmpSubscriberAccessModeType  
INTEGER ipoe(0), pppoe(1)    

SheBridgePortPriorityOptionType  
INTEGER dscp(1), userTag(2), force(3)    

SheVlanStatusType  
INTEGER static(1), dynamic(2)    

SheVlanServiceType  
INTEGER doubleTagging(1), vlanStacking(2)    

SheRuleType  
INTEGER globalSrcMacDeny(1), portFlowControl(2), meteringBridgePort(3), qosVlan(4), qosDscp(5), qosBridgePort(6), providerDoubleTagVlan01(7), qosDoubleTagPrio01(8), qosDoubleTagDscp01(9), providerDoubleTagVlan02(10), qosDoubleTagPrio02(11), qosDoubleTagDscp02(12), mirrorBridgePort(13), qosDscp02(14), portFlowControl02(15), providerSingleTagVlan01(16), providerSingleTagVlan02(17), portFlowControl03(18), cosTranslation(19), etherTypTranslation(20), vlanTranslation(21), dscpTranslation(22), meteringDot1P(25), meteringVlan(26), meteringDhcpOnIU(27), meteringDhcpOnPort(28), meteringArpOnIU(29), meteringArpOnPort(30), meteringIgmpOnIU(31), meteringIgmpOnPort(32), meteringDslPort(33), genericRule(50), genericAdminRule(51)    

SheRuleMatchType  
INTEGER ignore(1), exact(2), exclude(3)    

SheRuleActionType  
INTEGER deny(1), allow(2), meter(3), changeInnerVlan(4), changeOuterVlan(5), changeInnerPriority(6), changeOuterPriority(7), changeTos(8), changeDscp(9), changeInnerVlanTag(10), changeOuterVlanTag(11), assignTC(12), mirror(13)    

SheRuleFlowType  
INTEGER upstream(1), downstream(2), bidirectional(3)    

SheRuleGenericActionType  
BITS deny(0), allow(1), meter(2), redirect(3), mirror(4), setDscp(5), setPriority(6), changeTagPriority(7), changeTagPriorityWithTos(8), setIpPrecedence(9), changeTosWithTagPriority(10), rateLimit(11), changeVlanId(12), copyToCpu(13), count(14), untag(15)    

SheRuleActivationStateType  
INTEGER notActive(0), active(1)    

SheFdbStatusType  
INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5), static(6)    

SheLagMethodType  
INTEGER srcmac(1), dstmac(2), xormac(3), srcip(4), dstip(5), xorip(6)    

SheLagStateType  
BITS lacpActivity(0), lacpTimeout(1), lacpAggregation(2), lacpSynchronization(3), lacpCollecting(4), lacpDistribution(5), lacpDefaulted(6), lacpExpired(7)    

SheDhcpRelayAgentOptionType  
INTEGER dhcpNone(0), dhcpOption82CircuitId(1), dhcpOption82RemoteId(2), dhcpOption82Both(3), pppoeNone(4), pppoeOptionCircuitId(5), pppoeOptionRemoteId(6), pppoeOptionBoth(7), simpDhcpNone(8), simpDhcpOption82CircuitId(9), simpDhcpOption82RemoteId(10), simpDhcpOption82Both(11), dhcpOption82LineProperty(12), dhcpOption82CircuitIdLineProperty(13), dhcpOption82RemoteIdLineProperty(14), dhcpOption82BothIdLineProperty(15), pppoeOptionLineProperty(16), pppoeOptionCircuitIdLineProperty(17), pppoeOptionRemoteIdLineProperty(18), pppoeOptionBothIdLineProperty(19), simpDhcpOption82LineProperty(20), simpDhcpOption82CircuitIdLineProperty(21), simpDhcpOption82RemoteIdLineProperty(22), simpDhcpOption82BothIdLineProperty(23)    

SheIgmpModeType  
INTEGER noIgmp(1), snoopOnly(3), proxy(4)    

SheIgmpProfileVlanForkingModeType  
INTEGER noForking(0), ipoeForking(1), pppoeForking(2)    

ShePmIntervalType  
INTEGER min15(1), day(2)    

ShePmSuspectFlagType  
INTEGER undefined(0), reliable(1), suspect(2)    

SheIgmpStatsBaseControlRequestType  
INTEGER clearIgmpStatsBase(741)    

SheIgmpStatsBaseControlStatusType  
INTEGER requestIdle(1), requestBusy(2), requestPassed(3), requestFailed(4)    

SheIgmpStatsBaseControlReqResultType  
INTEGER noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), wrongPortVlanIndex(38)    

SheIgmpStatsPortControlRequestType  
INTEGER clearIgmpStatsPort(742)    

SheIgmpStatsPortControlStatusType  
INTEGER requestIdle(1), requestBusy(2), requestPassed(3), requestFailed(4)    

SheIgmpStatsPortControlReqResultType  
INTEGER noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), wrongPortVlanIndex(38)    

SheIgmpStatsProviderControlRequestType  
INTEGER clearIgmpStatsProvider(743)    

SheIgmpFloodVlanControlRequestType  
INTEGER createIgmpFloodVlan(743), deleteIgmpFloodVlan(744)    

SheBridgeInterfaceType  
INTEGER uplink(1), downlink(2), cascading(3), subcascading(4)    

SheQueueModeType  
INTEGER strict(0), weighted(1)    

SheBridgePortIndexOrInvalid  
INTEGER -1 | 1..65535    

SheErpDomainOperatorRequestType  
INTEGER manualToSecondary(1), clear(2)    

SheErpNodeType  
INTEGER normalNode(1), rmNode(2)    

SheVlanIdOrInvalid  
Integer32 -1 | 1..4094    

SheErpDomainNodeStatusType  
INTEGER rmIdle(1), primaryProtecting(2), protecting(3), idle(4), failedSecondary(5), failedPrimary(6), preForward(7), isolated(8), deactivated(9), backoff(10)    

SheErpDomainRingStatusType  
INTEGER normal(1), protecting(2), unknown(3)    

SheBcscTrafficType  
INTEGER broadcast(1), multicast(2), dlf(3)    

SheBcscScopeType  
INTEGER port(1), vlan(2)    

SheBcscThresholdType  
INTEGER packetPerSecond(1), bytesPerSecond(2)    

SheMstpPortParamStateType  
INTEGER blocking(1), listening(2), learning(3), forwarding(4), disabled(5), discarding(6)    

SheMstpPortParamPortRoleType  
INTEGER rootPort(1), designatedPort(2), alternatePort(3), backupPort(4), disabledPort(5), masterPort(6)    

SheCistBridgeProtoParamForceVerType  
INTEGER stpCompatibility(0), normalOperation(2), mstpCompatibility(3)    

SheCistAdminPTPMacType  
INTEGER forceTrue(1), forceFalse(2), auto(3)    

SheMstpPortControlBridgeGroupAddress  
INTEGER bridgeGroupAddress(1), providerBridgeGroupAddress(2)    

SheArpFixedIpAntiSpoofingStatusType  
INTEGER inactive(0), active(1)    

SheIpAntiSpoofingStatusType  
INTEGER inactive(0), active(1)    

SheArpVlanFloodType  
INTEGER enable(1), disable(2), default(3)    

SheUmasControlRequestType  
INTEGER setUmasUseDhcpNextHop(101), addUmasStaticAddr(102), delUmasStaticAddr(103), setUmasUsePppoeNextHop(104), setUmasPppoeAgingTime(105), createUmasVlanEntry(110), deleteUmasVlanEntry(111)    

SheUmasControlReqResultType  
INTEGER noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37)    

SheMatControlRequestType  
INTEGER setDslamId(100), setPortEnable(101), setMatTranslationMode(102), refreshMatTable(105)    

SheBridgePortEtypeActionType  
INTEGER noAction(0), addTag(1), replaceOuterTag(2)    

SheMcastLeaveMode  
The leave mode of a bridgeport for mcast traffic.
TEXTUAL-CONVENTION    
  INTEGER normal(0), fast(1), ehtMode(2)  

SheBridgePortIpAsModeType  
The possible settings for bridgeport based IpAntispoofing.
TEXTUAL-CONVENTION    
  INTEGER offIpAs(0), onIpAsNoVlanCheck(1), onIpAsInnerVlanCheck(2), onIpAsOuterVlanCheck(3), onIpAsBothVlanCheck(4)  

SheBridgeIUProfileUsedMATBasisType  
Used type for selection of MAT basis per IU.
TEXTUAL-CONVENTION    
  INTEGER useMATperVlan(1), useMATperBridgeport(2)  

SheBridgePortACStatus  
Description.
TEXTUAL-CONVENTION    
  INTEGER deny(0), accept(1)  

SheVlanRoutedType  
ARP handling per vlan.
TEXTUAL-CONVENTION    
  INTEGER switching(0), routing(1)  

SheMeterProfileUseParametersType  
This type definition defines a bit-map for using the meterprofile parameter settings. If the corresponding bit is set to one the parameters should be used.
TEXTUAL-CONVENTION    
  BITS policingUS(0), policingDS(1)  

SheDhcpRelayAdminStateType  
telegram handling for DHCP and PPPoE relay: valid telegrams are handled, invalid telegrams are dropped snoop: valid telegrams are forwarded, invalid telegrams are dropped bridge: valid telegrams are forwarded, invalid telegrams are forwarded handling explanation: dhcpPppoeRelayRelay -> dhcp and Pppoe use mode relay dhcpPppoeRelaySnoop -> dhcp use mode relay and Pppoe use mode snoop Attention: The value up(1) and down(2) are only valid for she R1.5, R2.0 and R2.3. Release R2.5 and later will only accept value's 4..12
TEXTUAL-CONVENTION    
  INTEGER up(1), down(2), testing(3), dhcpPppoeRelayRelay(4), dhcpPppoeRelaySnoop(5), dhcpPppoeRelayBridge(6), dhcpPppoeSnoopRelay(7), dhcpPppoeSnoopSnoop(8), dhcpPppoeSnoopBridge(9), dhcpPppoeBridgeRelay(10), dhcpPppoeBridgeSnoop(11), dhcpPppoeBridgeBridge(12)  

SheDhcpUseTagForProtocolsType  
Used for configuration of global DHCP and PPPoE useTag settings.
TEXTUAL-CONVENTION    
  BITS dhcpUseInnerTagTrue(0), pppoeUseInnerTagTrue(1)  

SheIgmpVlanMode  
Configure VLAN mode for the system. This configuration is only functions when system is configured in double tagging mode.
TEXTUAL-CONVENTION    
  INTEGER inner(1), outer(2)  

SheIgmpVersionType  
To configure the supported Igmp version on provider vlan base.
TEXTUAL-CONVENTION    
  INTEGER iGMPv2(1), iGMPv3(2), iGMPv3Compatible(3)  

SheIgmpProviderASM  
Description.
TEXTUAL-CONVENTION    
  INTEGER enable(1), disable(2)  

SheIgmpProviderVlanCxuSnoopingState  
Description.
TEXTUAL-CONVENTION    
  INTEGER disable(0), enable(1)  

SheIgmpPortGroupsFiltermodeType  
filter-mode may be either INCLUDE or EXCLUDE.
TEXTUAL-CONVENTION    
  INTEGER include(1), exclude(2)  

SheIgmpProviderACStatus  
Description.
TEXTUAL-CONVENTION    
  INTEGER deny(0), accept(1)  

SheQueueColourAwareType  
Description.
TEXTUAL-CONVENTION    
  INTEGER none(0), dscp(2), providerBridge(4)  

SheQueueDiscardPolicyType  
Description.
TEXTUAL-CONVENTION    
  INTEGER tailDrop(1), wRed(2)  

SheCardQueueModeType  
The possible queue modes a DSL IU can use.
TEXTUAL-CONVENTION    
  INTEGER mode4QueueFlat(1), mode8QueueFlat(2), modeHQS(3)  

SheMatTranslationModeType  
The attribute descripes, which format for MAC address translation will be used.
TEXTUAL-CONVENTION    
  INTEGER world(1), ths(2), thsNoIndexOffset(3)  

SheVlanProtocolHandlingType  
Protocol handling per Vlan.
TEXTUAL-CONVENTION    
  INTEGER off(0), deny(1), proxy(2)  

SheBridgePortMCastAllowedVlanIdListType  
Description.
TEXTUAL-CONVENTION    
  BITS wildCard(0), vlan1(1), vlan2(2), vlan3(3), vlan4(4), vlan5(5), vlan6(6), vlan7(7), vlan8(8), vlan9(9), vlan10(10), vlan11(11), vlan12(12), vlan13(13), vlan14(14), vlan15(15), vlan16(16), vlan17(17), vlan18(18), vlan19(19), vlan20(20), vlan21(21), vlan22(22), vlan23(23), vlan24(24), vlan25(25)  

SheDhcpFloodingType  
To configure the flooding of DHCP and/or PPPoE packets per vlan.
TEXTUAL-CONVENTION    
  INTEGER enableFloodingDhcpAndPppoE(1), disableFloodingDhcpAndPppoE(2), enableFloodingDhcpOnly(3), enableFloodingPppoEOnly(4)  

SheBridgeMaxIpAddressType  
Used inside bridge configuration for maxIp support.
TEXTUAL-CONVENTION    
  Unsigned32 1..64  

SheBridgeIdType  
Used as type defintion for BridgeBase and BridgePort CircuitId and RemoteId configuration. The following predefined types are available: %B -> portstring (like 'iuslot'/'iuport') %M -> mac address %N -> NodeId or Hostname (only if individuell NodeIdentifier not available) %T -> (dsl) line type (adsl, vdsl, shdsl) %S -> slot %P -> port %R -> subport/servicename or Vlan ID (only if subport/servicename not available) %V -> unique vcc id %b -> unique bridgeport id %p -> vpi number %c -> vci number %E -> ethernet priority %v -> vlan ID %s -> slot number as printed on shelf %t -> tc-layer type (atm, eth) Useful separation characters: space . , ; / - : * It is also allowed to place free text. Predefined types will be replaced by NE with the requested information. The maximum total length of a resulting Id string is still 63 byte (overlaps will be cut off)!
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..63)  

SheBridgePortEntry  
SEQUENCE    
  sheBridgePortIndex Unsigned32
  sheSubLayerIndex InterfaceIndex
  sheSubLayerCircuit Integer32
  sheBridgePortPVID Integer32
  sheBridgePortPriority Integer32
  sheBridgePortUsage SheBridgePortUsageType
  sheBridgePortHostConfigurationProtocol SheHostConfigurationProtocolType
  sheBridgePortCircuitId OCTET STRING
  sheBridgePortMaxLearnPermitCount Integer32
  sheBridgePortMcastGroupPackageList OCTET STRING
  sheBridgePortMode SheBridgePortModeType
  sheBridgePortTaggingMode SheBridgePortTaggingModeType
  sheBridgePortRemoteId OCTET STRING
  sheBridgePortInnerPVID Integer32
  sheBridgePortReplaceVlanTag Integer32
  sheBridgePortInnerPriority Integer32
  sheBridgePortIpoaProviderRouterIpAddress IpAddress
  sheBridgePortPppoaSessionId Integer32
  sheBridgePortMcastMaxJoinedGroup Unsigned32
  sheBridgePortMcastLeaveMode SheMcastLeaveMode
  sheBridgePortMcastEHTMode SheEnableType
  sheBridgePortIgmpSubscriberAccessMode SheBridgePortIgmpSubscriberAccessModeType
  sheBridgePortInnerPriorityOption SheBridgePortPriorityOptionType
  sheBridgePortOuterPriorityOption SheBridgePortPriorityOptionType
  sheBridgePortPriorityMapIndex Unsigned32
  sheBridgePortIpAddressPermitCount SheBridgeMaxIpAddressType
  sheBridgePortMatEnabled TruthValue
  sheBridgePortIpAsMode SheBridgePortIpAsModeType
  sheBridgePortEtypeVlanMapProfilePtr Unsigned32

SheBridgeMacProfileEntry  
SEQUENCE    
  sheBridgeMacProfileSrcMacAddress OCTET STRING

SheBridgeIUProfileEntry  
SEQUENCE    
  sheBridgeIUPPPoASrcMacAddress OCTET STRING
  sheBridgeIUProfileUsedMATBasis SheBridgeIUProfileUsedMATBasisType
  sheBridgeIUReplaceVlanTag Integer32
  sheBridgeIUDscpPriorityMapIndex Unsigned32

SheBridgePortPriorityMapEntry  
SEQUENCE    
  sheBridgePortPriorityMapEntryIndex Unsigned32
  sheBridgePortPriorityMapDscp Unsigned32
  sheBridgePortPriorityMapPrio Unsigned32

SheBridgePortMCastConfigEntry  
SEQUENCE    
  sheBridgePortMCastBandwithLimit Unsigned32
  sheBridgePortMCastMinUCBandwithLimit Unsigned32
  sheBridgePortMCastMaxJoinedNonPremiumGroup Unsigned32
  sheBridgePortMCastRemainBandwith Unsigned32
  sheBridgePortMCastACStatus SheBridgePortACStatus

SheBridgePortEtypeVlanMapEntry  
SEQUENCE    
  sheBridgePortEtypeVlanMapProfIndex Unsigned32
  sheBridgePortEtypeVlanMapEthertype OCTET STRING
  sheBridgePortEtypeVlanMapVlanId Unsigned32
  sheBridgePortEtypeVlanMapPriority Unsigned32

SheBridgeExtResidentialEntry  
SEQUENCE    
  sheBridgeExtResidentialMode SheEnableType
  sheBridgeExtResidentialState SheBridgePortUsageType

SheVlanEntry  
SEQUENCE    
  sheVlanIndex Integer32
  sheVlanName OCTET STRING
  sheVlanStatus SheVlanStatusType
  sheVlanEgressPorts OCTET STRING
  sheVlanUnTaggedPorts OCTET STRING
  sheVlanFdbId Unsigned32
  sheVlanCreationTime TimeTicks
  sheVlanMulticastPermission ShePermissionType
  sheVlanDhcpProviderIndex Unsigned32
  sheVlanDefaultGateway OCTET STRING
  sheVlanPPPoEProviderIndex Unsigned32
  sheVlanMgmtVlan INTEGER
  sheVlanServiceTagOnly TruthValue
  sheVlanAgeingTime Unsigned32
  sheVlanRoutingMode SheBridgeRoutingModeType
  sheVlanTunnelingL2Protocol TruthValue
  sheVlanServiceType SheVlanServiceType
  sheVlanDlfFlood TruthValue
  sheVlanDlfFloodCard PhysicalIndex
  sheVlanCCMode TruthValue
  sheVlanRouted SheVlanRoutedType
  sheVlanMcastFlood TruthValue
  sheVlanMatEnable TruthValue
  sheVlanSubportServiceName OCTET STRING
  sheVlanUplinkTranslationVlan Integer32

SheRuleEntry  
SEQUENCE    
  sheRuleIndex Unsigned32
  sheRuleType SheRuleType
  sheRuleName OCTET STRING
  sheRulePriority Integer32
  sheRuleBridgePortPattern Integer32
  sheRuleBridgePortMatch SheRuleMatchType
  sheRuleSourceMacPattern OCTET STRING
  sheRuleSourceMacMatch SheRuleMatchType
  sheRuleSourceMacStartPattern OCTET STRING
  sheRuleSourceMacStopPattern OCTET STRING
  sheRuleSourceMacRangeMatch SheRuleMatchType
  sheRuleDestinationMacPattern OCTET STRING
  sheRuleDestinationMacMatch SheRuleMatchType
  sheRuleDestinationMacStartPattern OCTET STRING
  sheRuleDestinationMacStopPattern OCTET STRING
  sheRuleDestinationMacRangeMatch SheRuleMatchType
  sheRuleVlanIdPattern Integer32
  sheRuleVlanIdMatch SheRuleMatchType
  sheRulePriorityPattern INTEGER
  sheRulePriorityMatch SheRuleMatchType
  sheRuleTosPattern INTEGER
  sheRuleTosMatch SheRuleMatchType
  sheRuleDscpPattern INTEGER
  sheRuleDscpMatch SheRuleMatchType
  sheRuleEtherTypePattern OCTET STRING
  sheRuleEtherTypeMatch SheRuleMatchType
  sheRuleSourceIpAddressPattern OCTET STRING
  sheRuleSourceIpAddressMatch SheRuleMatchType
  sheRuleSourceIpSubnetMaskPattern OCTET STRING
  sheRuleSourceIpSubnetMaskMatch SheRuleMatchType
  sheRuleDestinationIpAddressPattern OCTET STRING
  sheRuleDestinationIpAddressMatch SheRuleMatchType
  sheRuleDestinationIpSubnetMaskPattern OCTET STRING
  sheRuleDestinationIpSubnetMaskMatch SheRuleMatchType
  sheRuleSourcePortPattern Integer32
  sheRuleSourcePortMatch SheRuleMatchType
  sheRuleDestinationPortPattern Integer32
  sheRuleDestinationPortMatch SheRuleMatchType
  sheRuleAction SheRuleActionType
  sheRuleActionParameter01 Integer32
  sheRuleActionParameter02 Integer32
  sheRuleFlowPattern SheRuleFlowType
  sheRuleFlowMatch SheRuleMatchType
  sheRuleIpProtocolPattern Unsigned32
  sheRuleIpProtocolMatch SheRuleMatchType
  sheRuleIpPrecedencePattern Unsigned32
  sheRuleIpPrecedenceMatch SheRuleMatchType
  sheRuleSourceMacMaskPattern OCTET STRING
  sheRuleSourceMacMaskMatch SheRuleMatchType
  sheRuleDestinationMacMaskPattern OCTET STRING
  sheRuleDestinationMacMaskMatch SheRuleMatchType
  sheRuleMessageTypePattern Integer32
  sheRuleMessageTypeMatch SheRuleMatchType
  sheRuleMessageCodePattern Integer32
  sheRuleMessageCodeMatch SheRuleMatchType
  sheRuleGenericMatchAction SheRuleGenericActionType
  sheRuleGenericNoMatchAction SheRuleGenericActionType
  sheRuleGenericMatchActionParameterMeterIndex Unsigned32
  sheRuleGenericMatchActionParameterRedirPort Unsigned32
  sheRuleGenericMatchActionParameterDscp Unsigned32
  sheRuleGenericMatchActionParameterPriority Unsigned32
  sheRuleGenericMatchActionParameterTagPriority Unsigned32
  sheRuleGenericMatchActionParameterIpPrecedence Unsigned32
  sheRuleGenericMatchActionParameterRate Unsigned32
  sheRuleGenericMatchActionParameterVlanId Unsigned32
  sheRuleGenericNoMatchActionParameterMeterIndex Unsigned32
  sheRuleGenericNoMatchActionParameterRedirPort Unsigned32
  sheRuleGenericNoMatchActionParameterDscp Unsigned32
  sheRuleGenericNoMatchActionParameterPriority Unsigned32
  sheRuleGenericNoMatchActionParameterTagPriority Unsigned32
  sheRuleGenericNoMatchActionParameterIpPrecedence Unsigned32
  sheRuleGenericNoMatchActionParameterRate Unsigned32
  sheRuleGenericNoMatchActionParameterVlanId Unsigned32
  sheRuleMatchCounter Integer32
  sheRuleActivationState SheRuleActivationStateType
  sheRuleInnerVlanIdPattern Integer32
  sheRuleInnerVlanIdMatch SheRuleMatchType
  sheRuleInnerPriorityPattern Integer32
  sheRuleInnerPriorityMatch SheRuleMatchType
  sheRuleIUPhysIndexPattern PhysicalIndex
  sheRuleIUPhysIndexMatch SheRuleMatchType
  sheRulePortIfIndexPattern InterfaceIndex
  sheRulePortIfIndexMatch SheRuleMatchType

SheMeterProfileEntry  
SEQUENCE    
  sheMeterProfileIndex Unsigned32
  sheMeterProfileName OCTET STRING
  sheMeterProfileCir Integer32
  sheMeterProfileCbs Integer32
  sheMeterProfilePir Integer32
  sheMeterProfilePbs Integer32
  sheMeterProfileDsCir Integer32
  sheMeterProfileDsCbs Integer32
  sheMeterProfileDsPir Integer32
  sheMeterProfileDsPbs Integer32
  sheMeterProfileUseParameters SheMeterProfileUseParametersType

SheFdbEntry  
SEQUENCE    
  sheFdbIndex Unsigned32
  sheFdbMacAddress OCTET STRING
  sheFdbPort INTEGER
  sheFdbAge Unsigned32
  sheFdbStatus SheFdbStatusType
  sheFdbCpuPermit ShePermissionType
  sheFdbPortPermit ShePermissionType

SheLagGroupEntry  
SEQUENCE    
  sheLagGroupMacAddress OCTET STRING
  sheLagGroupActorSystemPriority Unsigned32
  sheLagGroupActorSystemId OCTET STRING
  sheLagGroupAggregateOrIndividual TruthValue
  sheLagGroupActorAdminKey Integer32
  sheLagGroupActorOperKey Integer32
  sheLagGroupPartnerSystemId OCTET STRING
  sheLagGroupPartnerSystemPriority Integer32
  sheLagGroupPartnerOperKey Integer32
  sheLagGroupCollectorMaxDelay Integer32
  sheLagGroupLacpActivity TruthValue
  sheLagGroupMethod SheLagMethodType
  sheLagGroupPortList OCTET STRING
  sheLagGroupEntPhysicalIndex PhysicalIndex

SheLagPortEntry  
SEQUENCE    
  sheLagPortActorSystemPriority Integer32
  sheLagPortActorSystemId OCTET STRING
  sheLagPortActorAdminKey Integer32
  sheLagPortActorOperKey Integer32
  sheLagPortPartnerAdminSystemPriority Integer32
  sheLagPortPartnerOperSystemPriority Integer32
  sheLagPortPartnerAdminSystemId OCTET STRING
  sheLagPortPartnerOperSystemId OCTET STRING
  sheLagPortPartnerAdminKey Integer32
  sheLagPortPartnerOperKey Integer32
  sheLagPortSelectedAggId Integer32
  sheLagPortAttachedAggId Integer32
  sheLagPortActorPort Integer32
  sheLagPortActorPortPriority Integer32
  sheLagPortPartnerAdminPort Integer32
  sheLagPortPartnerOperPort Integer32
  sheLagPortPartnerAdminPortPriority Integer32
  sheLagPortPartnerOperPortPriority Integer32
  sheLagPortActorAdminState SheLagStateType
  sheLagPortActorOperState SheLagStateType
  sheLagPortPartnerAdminState SheLagStateType
  sheLagPortPartnerOperState SheLagStateType
  sheLagPortAggregateOrIndividual TruthValue
  sheLagPortLacpAvailability TruthValue

SheDhcpProviderEntry  
SEQUENCE    
  sheDhcpProviderIndex Unsigned32
  sheDhcpProviderName OCTET STRING
  sheDhcpServerIpAddress1 OCTET STRING
  sheDhcpServerIpAddress2 OCTET STRING
  sheDhcpServerIpAddress3 OCTET STRING
  sheDhcpServerGateway OCTET STRING
  sheDhcpVlanId Integer32
  sheDhcpRelayAgentIpAddress OCTET STRING
  sheDhcpRelayAgentNetmask OCTET STRING
  sheDhcpRelayAgentOption SheDhcpRelayAgentOptionType
  sheDhcpCebsMacTranslation TruthValue
  sheDhcpRelayAgentMgmt TruthValue
  sheDhcpInnerVlanId Integer32
  sheDhcpBcastTranslationDs TruthValue
  sheDhcpLinePropertyNodeIdentifier OCTET STRING
  sheDhcpServerIpAddress4 OCTET STRING

SheDhcpFloodVlanIdEntry  
SEQUENCE    
  sheDhcpFloodVlanId Integer32
  sheDhcpFloodVlanEnabled SheDhcpFloodingType

SheIgmpProfileEntry  
SEQUENCE    
  sheIgmpProviderIndex Unsigned32
  sheIgmpProviderProfileName DisplayString
  sheIgmpProviderProxyIpAddress OCTET STRING
  sheIgmpProviderRobustness Unsigned32
  sheIgmpProviderQueryInterval Unsigned32
  sheIgmpProviderQueryResponseInterval Unsigned32
  sheIgmpProviderStartupQueryInterval Unsigned32
  sheIgmpProviderStartupQueryCount Unsigned32
  sheIgmpProviderLastMemberQueryInterval Unsigned32
  sheIgmpProviderLastMemberQueryCount Unsigned32
  sheIgmpProviderImmediateLeave ShePermissionType
  sheIgmpProviderUnsolicitedReportInterval Unsigned32
  sheIgmpProviderVersion1RouterTimeout Unsigned32
  sheIgmpProviderVersion1RouterPresentTimeout TimeTicks
  sheIgmpProviderVlanMulticastLimitation TruthValue
  sheIgmpProviderMcastBandwithLimit Unsigned32
  sheIgmpProviderDefaultChannelBandwith Unsigned32

SheIgmpProfileVlanEntry  
SEQUENCE    
  sheIgmpProfileVlanVlanId Integer32
  sheIgmpProfileVlanMcastEgressPorts OCTET STRING
  sheIgmpProfileVlanInnerVlanId Integer32
  sheIgmpProfileVlanDot1pPriority Unsigned32
  sheIgmpProfileVlanDot1pReportPriority Unsigned32
  sheIgmpProfileVlanDot1pInnerPriority Unsigned32
  sheIgmpProfileVlanDot1pInnerReportPriority Unsigned32
  sheIgmpProfileVlanForkingMode SheIgmpProfileVlanForkingModeType
  sheIgmpProfileVlanOuterVlanId Integer32
  sheIgmpProfileVlanVersion SheIgmpVersionType
  sheIgmpProfileVlanASMStatus SheIgmpProviderASM
  sheIgmpProfileVlanCxUSnoopingState SheIgmpProviderVlanCxuSnoopingState
  sheIgmpProfileVlanDefaultSourceIdList OCTET STRING

SheIgmpGroupEntry  
SEQUENCE    
  sheIgmpGroupIndex Unsigned32
  sheIgmpGroupIpAddress OCTET STRING
  sheIgmpGroupName OCTET STRING
  sheIgmpGroupProviderId Unsigned32
  sheIgmpGroupMcastGroupPackageList OCTET STRING
  sheIgmpGroupJoinedPortsList OCTET STRING
  sheIgmpGroupLastMembershipReport TimeTicks
  sheIgmpGroupLastLeaveMessage TimeTicks
  sheIgmpGroupSuppliedCardList OCTET STRING
  sheIgmpGroupIsStatic TruthValue
  sheIgmpMcastChannelSourceId Unsigned32
  sheIgmpMcastChannelBandwith Unsigned32
  sheIgmpMcastChannelDefaultSourceIdList OCTET STRING

SheIgmpMcastGroupPackageEntry  
SEQUENCE    
  sheIgmpMcastGroupPackageIndex Unsigned32
  sheIgmpMcastGroupPackageName OCTET STRING
  sheIgmpMcastGroupPackageGroupList OCTET STRING

SheIgmpPortGroupsEntry  
SEQUENCE    
  sheIgmpPortGroupsStpIpAddress OCTET STRING
  sheIgmpPortGroupsTimeFirstMembRep TimeTicks
  sheIgmpPortGroupsTimeLastMembRep TimeTicks
  sheIgmpPortGroupsFiltermode SheIgmpPortGroupsFiltermodeType
  sheIgmpPortGroupsSourceId OCTET STRING
  sheIgmpPortGroupsIpAddress OCTET STRING
  sheIgmpPortGroupsIndex Unsigned32

SheIgmpPmObjectEntry  
SEQUENCE    
  sheIgmpPmObjectIndex Unsigned32
  sheIgmpPmObjectGroupIndex Unsigned32

SheIgmpPmCurrentEntry  
SEQUENCE    
  sheIgmpPmCurrentIntervalType ShePmIntervalType
  sheIgmpPmCurrentAdminState SheAdminStateType
  sheIgmpPmCurrentSuspectFlag ShePmSuspectFlagType
  sheIgmpPmCurrentHistEntrySize Unsigned32
  sheIgmpPmCurrentHistEntriesAvailable Unsigned32
  sheIgmpPmCurrentElapsedTime Unsigned32
  sheIgmpPmCurrentMembershipReportsFromHost Unsigned32
  sheIgmpPmCurrentPeakMembershipReportsFromHost Unsigned32
  sheIgmpPmCurrentTimeOfPeakMembershipReports TimeTicks
  sheIgmpPmCurrentGroupLeavesFromHost Unsigned32
  sheIgmpPmCurrentPeakGroupLeavesFromHost Unsigned32
  sheIgmpPmCurrentTimeOfPeakGroupLeaves TimeTicks
  sheIgmpPmCurrentMembershipReportsToRouter Unsigned32
  sheIgmpPmCurrentGroupLeavesToRouter Unsigned32
  sheIgmpPmCurrentPeakMulticastLeaves Unsigned32

SheIgmpPmHistoryTableEntry  
SEQUENCE    
  sheIgmpPmHistoryIntervalType ShePmIntervalType
  sheIgmpPmHistoryEntryNumber Unsigned32
  sheIgmpPmHistorySuspectFlag ShePmSuspectFlagType
  sheIgmpPmHistoryPeriodEndTime TimeTicks
  sheIgmpPmHistoryMembershipReportsFromHost Unsigned32
  sheIgmpPmHistoryPeakMembershipReportsFromHost Unsigned32
  sheIgmpPmHistoryTimeOfPeakMembershipReports TimeTicks
  sheIgmpPmHistoryGroupLeavesFromHost Unsigned32
  sheIgmpPmHistoryPeakGroupLeavesFromHost Unsigned32
  sheIgmpPmHistoryTimeOfPeakGroupLeaves TimeTicks
  sheIgmpPmHistoryMembershipReportsToRouter Unsigned32
  sheIgmpPmHistoryGroupLeavesToRouter Unsigned32
  sheIgmpPmHistoryPeakMulticastLeaves Unsigned32

SheIgmpStatsGroupEntry  
SEQUENCE    
  sheIgmpStatsGroupIndex Unsigned32
  sheIgmpStatsGroupTimeSinceLastMembershipReport TimeTicks

SheIgmpStatsPortEntry  
SEQUENCE    
  sheIgmpStatsPortNumberOfGroups Counter32
  sheIgmpStatsPortNumberOfQueryReceived Counter32
  sheIgmpStatsPortNumberOfReportReceived Counter32
  sheIgmpStatsPortNumberOfLeaveReceived Counter32
  sheIgmpStatsPortNumberOfInvalidReceived Counter32
  sheIgmpStatsPortPeakNumberOfActiveGroup Gauge32
  sheIgmpStatsPortTimeOfPeakNumberOfActiveGroup TimeTicks
  sheIgmpStatsPortNumberOfDroppedByCA Gauge32
  sheIgmpStatsPortNumberOfDroppedByAC Gauge32

SheIgmpStatsProviderEntry  
SEQUENCE    
  sheIgmpStatsProviderNumberOfChannelsToRouter Counter32
  sheIgmpStatsProviderNumberOfChannelsToHost Counter32
  sheIgmpStatsProviderNumberOfQueryReceived Counter32
  sheIgmpStatsProviderNumberOfReportReceived Counter32
  sheIgmpStatsProviderNumberOfLeaveReceived Counter32
  sheIgmpStatsProviderNumberOfInvalidReceived Counter32
  sheIgmpStatsProviderPeakNumberOfActiveChannelToRouter Counter32
  sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelToRouter TimeTicks
  sheIgmpStatsProviderPeakNumberOfActiveChannelFromHost Counter32
  sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelFromHost TimeTicks
  sheIgmpStatsProviderNumberOfMsgPerSec Gauge32
  sheIgmpStatsProviderPeakNumberOfMsgPerSec Gauge32
  sheIgmpStatsProviderTimeOfPeakNumberOfMsgPerSec TimeTicks

SheIgmpFloodVlanEntry  
SEQUENCE    
  sheIgmpFloodVlanId INTEGER

SheIgmpSourceIpAddressEntry  
SEQUENCE    
  sheIgmpSourceIpIndex Unsigned32
  sheIgmpSourceIpAddress OCTET STRING

SheIgmpBridgePortProviderConfigEntry  
SEQUENCE    
  sheIgmpBridgePortProviderVlanId Integer32
  sheIgmpBridgePortProviderTranslationVlanId Integer32
  sheIgmpBridgePortProviderAllowedVlanIdList OCTET STRING
  sheIgmpBridgePortProviderMcastRemainBandwith Unsigned32
  sheIgmpBridgePortProviderMcastACStatus SheIgmpProviderACStatus

SheQueuePriorityEntry  
SEQUENCE    
  sheQueuePriority Integer32
  sheQueueNumber Integer32

SheReducedQueuePriorityEntry  
SEQUENCE    
  sheReducedQueuePriority Integer32
  sheReducedQueueNumber Integer32

SheQueueModeEntry  
SEQUENCE    
  sheQueueModeInterfaceTypeIndex SheBridgeInterfaceType
  sheQueueConfigurationMode SheQueueModeType

SheQueueWeightEntry  
SEQUENCE    
  sheQueueIndex Unsigned32
  sheQueueWeight Unsigned32
  sheQueueWeightWatermarkLow Integer32
  sheQueueWeightWatermarkHigh Integer32

SheCardQueueConfigurationEntry  
SEQUENCE    
  sheCardQueueInterfaceTypeIndex SheBridgeInterfaceType
  sheCardQueueSchedulingMode SheQueueModeType
  sheCardQueue1Weight Unsigned32
  sheCardQueue1Watermarks Unsigned32
  sheCardQueue2Weight Unsigned32
  sheCardQueue2Watermarks Unsigned32
  sheCardQueue3Weight Unsigned32
  sheCardQueue3Watermarks Unsigned32
  sheCardQueue4Weight Unsigned32
  sheCardQueue4Watermarks Unsigned32
  sheCardQueue5Weight Unsigned32
  sheCardQueue5Watermarks Unsigned32
  sheCardQueue6Weight Unsigned32
  sheCardQueue6Watermarks Unsigned32
  sheCardQueue7Weight Unsigned32
  sheCardQueue7Watermarks Unsigned32
  sheCardQueue8Weight Unsigned32
  sheCardQueue8Watermarks Unsigned32
  sheCardQueueColourAwareTCSource SheQueueColourAwareType
  sheCardQueueColourMarking SheQueueColourAwareType
  sheCardQueueDiscardPolicy SheQueueDiscardPolicyType
  sheCardQueueMode SheCardQueueModeType
  sheCardQueueHqsSecondStageInputQueue Unsigned32
  sheCardQueueHqsFirstStagePir Unsigned32
  sheCardQueueHqsFirstStagePbs Unsigned32

SheShapingProfileEntry  
SEQUENCE    
  sheShapingProfileIndex Unsigned32
  sheShapingProfileName OCTET STRING
  sheShapingProfileCir Integer32
  sheShapingProfileCbs Integer32

SheShapingProfileAssignmentEntry  
SEQUENCE    
  sheShapingProfileAssignmentQueueNumber Unsigned32
  sheShapingProfileAssignmentProfileIndex Unsigned32

SheErpDomainEntry  
SEQUENCE    
  sheErpDomainIndex Unsigned32
  sheErpDomainName DisplayString
  sheErpDomainPrimaryPort SheBridgePortIndexOrInvalid
  sheErpDomainSecondaryPort SheBridgePortIndexOrInvalid
  sheErpDomainWaitToRestoreTime Unsigned32
  sheErpDomainTestPacketInterval Unsigned32
  sheErpDomainLearningDisabledTime Unsigned32
  sheErpDomainProtectionActivation ShePermissionType
  sheErpDomainOperatorRequest SheErpDomainOperatorRequestType
  sheErpDomainNodeMode SheErpNodeType
  sheErpDomainControlVlan SheVlanIdOrInvalid
  sheErpDomainNodeStatus SheErpDomainNodeStatusType
  sheErpDomainRingStatus SheErpDomainRingStatusType
  sheErpDomainLotp TruthValue
  sheErpDomainUlotp TruthValue
  sheErpDomainMultipleRm TruthValue
  sheErpDomainRmReach TruthValue
  sheErpDomainLotpTrapEnable ShePermissionType
  sheErpDomainUlotpTrapEnable ShePermissionType
  sheErpDomainMultipleRmTrapEnable ShePermissionType
  sheErpDomainRmReachTrapEnable ShePermissionType
  sheErpDomainAlarmSeverityIndex SheAlarmSevProfileIndex

SheBcscEntry  
SEQUENCE    
  sheBcscIndex Unsigned32
  sheBcscType SheBcscTrafficType
  sheBcscConfigScope SheBcscScopeType
  sheBcscConfigIndex Unsigned32
  sheBcscThresholdType SheBcscThresholdType
  sheBcscThresholdValue Unsigned32
  sheBcscVendorSpecific OCTET STRING
  sheBcscAlarmDebounceTimer Unsigned32
  sheBcscAlarmSeverityIndex SheAlarmSevProfileIndex

SheMstpBridgeProtoParamEntry  
SEQUENCE    
  sheMstpBridgeProtoParamIndex Unsigned32
  sheMstpBridgeProtoParamBridgeId OCTET STRING
  sheMstpBridgeProtoParamBridgePriority Unsigned32
  sheMstpBridgeProtoParamTcTime TimeTicks
  sheMstpBridgeProtoParamTcCount Counter32
  sheMstpBridgeProtoParamTc TruthValue
  sheMstpBridgeProtoParamDesignatedRoot OCTET STRING
  sheMstpBridgeProtoParamRootPort Unsigned32
  sheMstpBridgeProtoParamRootPathCost Unsigned32

SheMstpPortParamEntry  
SEQUENCE    
  sheMstpPortParamTableIndex Unsigned32
  sheMstpPortParamProtoIndex Unsigned32
  sheMstpPortParamPortIndex Unsigned32
  sheMstpPortParamUpTime TimeTicks
  sheMstpPortParamState SheMstpPortParamStateType
  sheMstpPortParamPortId OCTET STRING
  sheMstpPortParamPortPriority Unsigned32
  sheMstpPortParamAdminPathCost Unsigned32
  sheMstpPortParamDesignatedRoot OCTET STRING
  sheMstpPortParamDesignatedBridge OCTET STRING
  sheMstpPortParamDesignatedPort OCTET STRING
  sheMstpPortParamDesignatedCost Unsigned32
  sheMstpPortParamPortRole SheMstpPortParamPortRoleType
  sheMstpPortParamCurrentPathCost Unsigned32

SheCistPortParamEntry  
SEQUENCE    
  sheCistPortParamIndex Unsigned32
  sheCistPortParamUpTime TimeTicks
  sheCistPortParamState SheMstpPortParamStateType
  sheCistPortParamPortId OCTET STRING
  sheCistPortParamPortPriority Unsigned32
  sheCistPortParamAdminPathCost Unsigned32
  sheCistPortParamDesignatedRoot OCTET STRING
  sheCistPortParamDesignatedCost Unsigned32
  sheCistPortParamDesignatedBridge OCTET STRING
  sheCistPortParamDesignatedPort OCTET STRING
  sheCistPortParamTcAck TruthValue
  sheCistPortParamAdminEdgePort TruthValue
  sheCistPortParamOperEdgePort TruthValue
  sheCistPortParamMacEnabled TruthValue
  sheCistPortParamMacOperational TruthValue
  sheCistPortParamAdminPointToPointMac SheCistAdminPTPMacType
  sheCistPortParamOperPointToPointMac TruthValue
  sheCistPortParamRegionalRootId OCTET STRING
  sheCistPortParamRegionalRootPathCost Unsigned32
  sheCistPortParamPortHelloTime Unsigned32
  sheCistPortParamHelloTime Unsigned32
  sheCistPortParamPortRole SheMstpPortParamPortRoleType
  sheCistPortParamCurrentPathCost Unsigned32
  sheCistPortParamLoopDetect TruthValue

SheMstpPortEntry  
SEQUENCE    
  sheMstpPortBridgeGroupAddress SheMstpPortControlBridgeGroupAddress

SheArpFixedIpAddressEntry  
SEQUENCE    
  sheArpFixedIpAddressIndex Integer32
  sheArpFixedIpAddressBridgePortIndex Integer32
  sheArpFixedIpAddress OCTET STRING
  sheArpFixedIpAddressLearnedMac OCTET STRING
  sheArpFixedIpAntiSpoofingStatus SheArpFixedIpAntiSpoofingStatusType
  sheArpFixedIpAddressInnerVlanTag Integer32
  sheArpFixedIpAddressOuterVlanTag Integer32

SheDhcpSnoopingEntry  
SEQUENCE    
  sheDhcpSnoopingBridgePortIndex Integer32
  sheDhcpSnoopingIpAddress IpAddress
  sheDhcpSnoopingMacAddress OCTET STRING
  sheDhcpSnoopingRemainingTime Integer32
  sheIpAntiSpoofingStatus SheIpAntiSpoofingStatusType
  sheDhcpSnoopingVlanId Unsigned32

SheArpVlanEntry  
SEQUENCE    
  sheArpVlanFloodFlag SheArpVlanFloodType

SheQoSPmCounterEntry  
SEQUENCE    
  sheQoSPacketCounterQueue1 Counter64
  sheQoSPacketCounterQueue2 Counter64
  sheQoSPacketCounterQueue3 Counter64
  sheQoSPacketCounterQueue4 Counter64
  sheQoSPacketCounterQueue5 Counter64
  sheQoSPacketCounterQueue6 Counter64
  sheQoSPacketCounterQueue7 Counter64
  sheQoSPacketCounterQueue8 Counter64
  sheQoSDroppedPacketCounter Counter64

SheUmasEntry  
SEQUENCE    
  sheUmasIndex Integer32
  sheUmasAddress OCTET STRING
  sheUmasIsStatic TruthValue
  sheUmasIsDhcpNextHop TruthValue
  sheUmasIsPppoeNextHop TruthValue

SheUmasVlanEntry  
SEQUENCE    
  sheUmasVlanId INTEGER

SheCebsPortEntry  
SEQUENCE    
  sheCebsPortBridgePortIndex Integer32

SheCebsSubscriberEntry  
SEQUENCE    
  sheCebsSubscriberIpAddress IpAddress
  sheCebsSubscriberBridePortIndex Integer32
  sheCebsSubscriberVlan Integer32
  sheCebsSubscriberIsStatic TruthValue
  sheCebsSubscriberIsDynamic TruthValue
  sheCebsSubscriberOperState Integer32

SheCebsDhcpGatewayEntry  
SEQUENCE    
  sheCebsDhcpGatewayUserVlan Integer32
  sheCebsDhcpGatewayIpAddress IpAddress

SheCebsStaticGatewayEntry  
SEQUENCE    
  sheCebsStaticGatewayUserVlan Integer32
  sheCebsStaticGatewayIpAddress IpAddress

SheCebsVirtualMacEntry  
SEQUENCE    
  sheCebsVirtualMacAddress OCTET STRING
  sheCebsVirtualMacType Integer32
  sheCebsVirtualMacEntPhysicalIndex PhysicalIndex

SheMatPortEntry  
SEQUENCE    
  sheMatPortEnable TruthValue

SheMatEntry  
SEQUENCE    
  sheMatTranslatedMacAddress OCTET STRING
  sheMatOriginalMacAddress OCTET STRING
  sheMatIndex Unsigned32

Defined Values

sheBridgeMib 1.3.6.1.4.1.231.7.1.2.1.4
This MIB contains all needed informations about bridgePorts and all supported she bridgeing features.
MODULE-IDENTITY    

sheBridge 1.3.6.1.4.1.231.7.1.2.1.4.1
OBJECT IDENTIFIER    

sheBridgeBase 1.3.6.1.4.1.231.7.1.2.1.4.1.1
OBJECT IDENTIFIER    

sheBridgeBaseMode 1.3.6.1.4.1.231.7.1.2.1.4.1.1.1
The general operating mode of the bridge.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeModeType  

sheBridgeBaseTaggingMode 1.3.6.1.4.1.231.7.1.2.1.4.1.1.2
The general tagging mode of the bridge.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeTaggingModeType  

sheBridgeBaseMirrorPort 1.3.6.1.4.1.231.7.1.2.1.4.1.1.3
The Mirror port of the system. That is a sheBridgePortIndex and it could only be used on ports with bridgePortUsage = uplink. This value should be 0 if no mirror-port is configured in the system
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheBridgeBaseOuterPVID 1.3.6.1.4.1.231.7.1.2.1.4.1.1.4
The default PVID of the outer Vlan used by the switch fabric in case of doubleTag-Mode or if a frame with priority tag is received and no other rule to change the vlan tag will match.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheBridgeBaseOuterPriority 1.3.6.1.4.1.231.7.1.2.1.4.1.1.5
The default .1p-Priority of the outer vlan in case of doubleTag-Mode.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

sheBridgeBaseCircuitIdFormat 1.3.6.1.4.1.231.7.1.2.1.4.1.1.6
The default value should be: '%N %t %S/%P:%p.%c' -> when ATM/DSL is used '%N %t %S/%P:%v' -> when Ethernet/DSL is used It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting circuitId is still 63 byte (overlaps will be cut off)!
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeIdType  

sheBridgeBaseSharedVlanLearning 1.3.6.1.4.1.231.7.1.2.1.4.1.1.7
Enable or disable the feature SharedVlanLearning in the NE.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeSharedVlanLearningType  

sheBridgeBaseRemoteIdFormat 1.3.6.1.4.1.231.7.1.2.1.4.1.1.8
The default value is: '%M' It is up to the custoumer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting remoteId is still 63 byte (overlaps will be cut off)!
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeIdType  

sheBridgeBaseStagTPID 1.3.6.1.4.1.231.7.1.2.1.4.1.1.9
The TPID of the service tag if doubleTag is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheBridgeBaseMacAntiSpoofing 1.3.6.1.4.1.231.7.1.2.1.4.1.1.10
Enable or disable the feature MacAntiSpoofing in the NE.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeMacAntiSpoofingType  

sheBridgeBaseRoutingMode 1.3.6.1.4.1.231.7.1.2.1.4.1.1.11
residential or unrestricted the feature Routing Mode of BridgeBase in the NE.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeRoutingModeType  

sheBridgeBaseMaxHostName 1.3.6.1.4.1.231.7.1.2.1.4.1.1.12
the maximum length of hostname for circuit-id or remote-id.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

sheBridgeBaseDlfFilter 1.3.6.1.4.1.231.7.1.2.1.4.1.1.13
The policy of DLF (destination lookup failur) unicast packets from uplink. Enable DLF filter -> destination-mac unknown unicast towards subscriber ports blocked Disable DLF filter -> destination-mac unknown unicast towards subscriber ports allowed default:enable
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeDlfFilterType  

sheBridgeBaseUnknownMuticastFilter 1.3.6.1.4.1.231.7.1.2.1.4.1.1.14
The policy of unknown multicast packets from uplink. It can be set to enable when routing mode is residential default: enable in R2.0, disable in R2.3 / R2.5.x Possible values: disable(0), enable(1) -> means enable both directions! enableDs(2) -> enable only downstream direction enableUs(3) -> enable only upstream direction
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeUnknownMulticastFilterType  

sheBridgeBaseIpoaArpReqInterval 1.3.6.1.4.1.231.7.1.2.1.4.1.1.15
The interval of ARP resolution for IPoA Bridgeport Default: 0 If the value is 0, it means NE does not send any arp request to an ipoa provider edge router after the router ip address is resolved. Thus, if the ipoa provider edge router's MAC address is changed, packet uses wrong MAC address, unused one, for ipoa provider edge router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgeBaseMaxIpUNI 1.3.6.1.4.1.231.7.1.2.1.4.1.1.16
This is the maximum number of possible IpAddresses (DHCP or fixed IP) per UNI Port. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeMaxIpAddressType  

sheBridgeBaseControl 1.3.6.1.4.1.231.7.1.2.1.4.1.2
OBJECT IDENTIFIER    

sheBridgeBaseControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.1.2.1
setBridgeMode: sheBridgeBaseControlMode setBridgeTaggingMode: sheBridgeBaseControlTaggingMode setBridgeMirrorPort: sheBridgeBaseControlMirrorPort setBridgeOuterVlanDefaults: sheBridgeBaseControlOuterPVID sheBridgeBaseControlOuterPriority setBridgeCircuitIdFormat: sheBridgeBaseControlCircuitIdFormat setBridgeSharedVlanLearning: sheBridgeBaseControlSharedVlanLearning setBridgeRemoteIdFormat: sheBridgeBaseControlRemoteIdFormat setBridgeStagTPID: sheBridgeBaseControlStagTPID setBridgeMacAntiSpoofing: sheBridgeBaseControlMacAntiSpoofing setBridgeRoutingMode: sheBridgeBaseControlRoutingMode setBridgeMaxHostName: sheBridgeBaseControlMaxHostName setBridgeDlfFilter: sheBridgeBaseControlDlfFilter setBridgeUnknownMulticastFilter: sheBridgeBaseControlUnknownMulticastFilter setBridgeIpoaArpReqInterval: sheBridgeBaseControlIpoaArpReqInterval
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheBridgeBaseControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.1.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheBridgeBaseControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.1.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheBridgeBaseControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.1.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheBridgeBaseControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.1.2.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgeBaseControlMode 1.3.6.1.4.1.231.7.1.2.1.4.1.2.6
Set the basic bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeModeType  

sheBridgeBaseControlTaggingMode 1.3.6.1.4.1.231.7.1.2.1.4.1.2.7
Set the basic tagging mode.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeTaggingModeType  

sheBridgeBaseControlMirrorPort 1.3.6.1.4.1.231.7.1.2.1.4.1.2.8
Set the mirror port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheBridgeBaseControlOuterPVID 1.3.6.1.4.1.231.7.1.2.1.4.1.2.9
The PVID of the outer Vlan in case of doubleTag-Mode.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheBridgeBaseControlOuterPriority 1.3.6.1.4.1.231.7.1.2.1.4.1.2.10
The default .1p-Priority of the outer vlan in case of doubleTag-Mode.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sheBridgeBaseControlCircuitIdFormat 1.3.6.1.4.1.231.7.1.2.1.4.1.2.11
It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting circuitId is still 63 byte (overlaps will be cut off)!
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeIdType  

sheBridgeBaseControlSharedVlanLearning 1.3.6.1.4.1.231.7.1.2.1.4.1.2.12
Enable or disable the feature SharedVlanLearning in the NE.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeSharedVlanLearningType  

sheBridgeBaseControlRemoteIdFormat 1.3.6.1.4.1.231.7.1.2.1.4.1.2.13
It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting remoteId is still 63 byte (overlaps will be cut off)!
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeIdType  

sheBridgeBaseControlStagTPID 1.3.6.1.4.1.231.7.1.2.1.4.1.2.14
The TPID of the service tag if doubleTag is enabled
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sheBridgeBaseControlMacAntiSpoofing 1.3.6.1.4.1.231.7.1.2.1.4.1.2.15
Enable or disable the feature MacAntiSpoofing in the NE.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeMacAntiSpoofingType  

sheBridgeBaseControlRoutingMode 1.3.6.1.4.1.231.7.1.2.1.4.1.2.16
residential or unrestricted the feature Routing Mode of BridgeBase in the NE.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeRoutingModeType  

sheBridgeBaseControlMaxHostName 1.3.6.1.4.1.231.7.1.2.1.4.1.2.17
the maximum length of hostname for circuit-id or remote-id.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..64  

sheBridgeBaseControlDlfFilter 1.3.6.1.4.1.231.7.1.2.1.4.1.2.18
The policy of DLF unicast packets from uplink.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeDlfFilterType  

sheBridgeBaseControlUnknownMulticastFilter 1.3.6.1.4.1.231.7.1.2.1.4.1.2.19
The policy of unknown multicast packets from uplink. It can be set to enable when routing mode is residential default: enable in R2.0, disable in R2.3 / R2.5.x Possible values: disable(0), enable(1) -> means enable both directions! enableDs(2) -> enable only downstream direction enableUs(3) -> enable only upstream direction
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeUnknownMulticastFilterType  

sheBridgeBaseControlIpoaArpReqInterval 1.3.6.1.4.1.231.7.1.2.1.4.1.2.20
The interval of ARP resolution for IPoA Bridgeport Default: 0 If the value is 0, it means NE does not send any arp request to an ipoa provider edge router after the router ip address is resolved. Thus, if the ipoa provider edge router's MAC address is changed, packet uses wrong MAC address, unused one, for ipoa provider edge router.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheBridgeBaseControlMaxIpUNI 1.3.6.1.4.1.231.7.1.2.1.4.1.2.21
This is the maximum number of possible IpAddresses (DHCP or fixed IP) per UNI Port. New parameter with SHE R2.8. Not configurable with current release!
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeMaxIpAddressType  

sheBridgePortTable 1.3.6.1.4.1.231.7.1.2.1.4.1.3
The bridgePort-Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheBridgePortEntry

sheBridgePortEntry 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1
One entry for every bridgePort of the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheBridgePortEntry  

sheBridgePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.1
A bridgePort-identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheSubLayerIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.2
IfIndex of the underlaying Interface in the interface-table, Also LAG-bridgePorts will be modeled in the interface table.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

sheSubLayerCircuit 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.3
Only used in case the bridgePort represents a PVC, otherwise equal 0. This value represent the the index for sheAdslVccTpTable, sheXdslVccTpTable or sheShdslVccTpTable depending on ifType of underlaying physical interface. This index was build by the following rule: index = (SubLayerIndex << 4) + Vcc-Number Lowest value for she is 0x0651 (ifIndex = 101 and Vcc-Number 1). Highest value for she is 0x6EC8 (ifIndex = 1772 and Vcc-Number 8).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheBridgePortPVID 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.4
The PVID of the port. Possible range is 1-4093 for subscriber ports. This value points to the corresponding vlanIndex of the sheVlanTable. The default value for subscriber bridgePorts is the ifIndex of the underlaying physical interface (sublayerindex). Uplink and LAG bridgePorts use PVID 1 as default.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheBridgePortPriority 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.5
Default Priority of the bridgePort.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

sheBridgePortUsage 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.6
defaults: Dsl PVC : subscriber Adsl special: vccAggregatorNotUsed Uplink : upLink Lag : notUsed If upLink-Port is aggregated, the upLink state moves to aggregated and the Lag moves to uplink. If a physical bonding is used (Shdsl 4wire/6wire/8wire done over shdsl configuration, m-pair bonding), the master bridgeport changes his usage to physbondedSubscriber and all other members to notUsed. If a gbond bonding is used (via she-bonding-mib configuration), the master bridgeport-entry of the new bonding port changes his usage to bondingSubscriber and all other members of bonding port to bondingNotUsed. For the feature singleMacMultipleVcc, it is possible to aggregate two or more single VCC's of one physical adsl-link to the vccAggregator. The usage of the single PVC - bridgeports (subscriber) could be set to vccAggregated and the special bridgeport change his usage from vccAggregatorNotUsed to ..Used in that case. It is also possible to set this special bridgeport usage directly and in that case all bridgeports with identical sublayerindex will change her usage to vccAggregated. This configuration has additional restrictions for PVID and priority configuration. Check MSC for detailes.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortUsageType  

sheBridgePortHostConfigurationProtocol 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.7
Used host configuration protocol. Valid values could none(0), useDHCP(1), usePPPoE(2). useDHCPandPPPoE(3).
Status: current Access: read-only
OBJECT-TYPE    
  SheHostConfigurationProtocolType  

sheBridgePortCircuitId 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.8
Needed for special Options in DHCP or PPPoE. If not configured the default format string from sheBridgeBaseCircuitIdFormat will be used.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sheBridgePortMaxLearnPermitCount 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.9
Number of dynamic learned Mac addresses per port. The valid configuration range for dynamic MacAddress learning is 1..2147483647 (0x7fffffff). A value of -1 disable the MacAddress limitation (default for uplink) -> 'No Limit'. A value of 0 disable the dynamic MacAddress learning -> 'Disabled'. Static FdbTable entrys possible. Additional limitations depending on the used CXU or IU type are possible. The default setting for subscriber ports is 16. Note: Syntax modified with R2.8 BFR 2.0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1 | 0 | 1..2147483647  

sheBridgePortMcastGroupPackageList 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.10
That is a list of allowed corresponding indices of the sheIgmpMcastGroupPackageTable for this subscriber. Each index has 16 bit. If no packet is assigned, the string has 0 length.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheBridgePortMode 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.11
Mode of this bridgeport useIpoE, useIpoA, usePPPoA or useAuto. useIpoE is the default setting. This mode will also support PPPoE. useIPoA is only possible for IU_ADSL or IU_SHDSL boards. If no MacAddress is configured in the corresponding MacProfileTable-entry, the NE will autogenerate a own value. In case of usePPPoA, the IU will translate the PPPoA protocol to PPPoE. This configuration is only valid for bridgeports with SubLayerIndex placed on IU_ADSL72 with IFX chipset! A SrcMac-address in sheBridgeIUProfileTable has to be configured for the IU where these port is placed on. The configuration useAuto forces the IU to start a autodetection mode for supporting PPPoA or PPPoE.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortModeType  

sheBridgePortTaggingMode 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.12
Tagging modes for bridgePort's. This modes are only valid for received frames. Tagging of transmitted frames depends on the bridgeBase-tagging mode and on the vlan-membership. off(0) Untagged frames are tagged with PVID and forwarded. Tagged frames are forwarded unchanged. That is the default value for uplink port's and should not be changed. tagged(1) Frames tagged with the configured VIDs are forwarded unchanged. Untagged frames and frames with unknown VIDs are dropped. Check sheBridgePortReplaceTag value if a received tag should be replaced by PVID. untagged(2) Untagged frames are tagged with PVID and forwarded. Tagged frames are dropped. That is the default value for subscriber port's. NOTE: SHE releases older then R2.5 will only support modes (0) and (1).
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortTaggingModeType  

sheBridgePortRemoteId 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.13
Needed for special Options in DHCP or PPPoE. If not configured the default format string from sheBridgeBaseRemoteIdFormat will be used.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sheBridgePortInnerPVID 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.14
The Inner PVID of this bridgePort. Taken if no other rule given for VLAN association. The default Value is 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheBridgePortReplaceVlanTag 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.15
If configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature. Only valid if the Bridgeport is running tagged(1) mode - otherwise must be zero. NOTE: Modified with R2.8. CG based IU's could only support one vlan tag per IU. This configuration is now used for enable/disable the feature on bridgeport-base. For enable, only the configured value from the IU global configuration will be accepted!
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4093  

sheBridgePortInnerPriority 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.16
The inner priority of this bridgePort. Taken if no other rule given for VLAN association. The default value is 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

sheBridgePortIpoaProviderRouterIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.17
The IPoA provider edge router's ip address for this bridgePort. 0.0.0.0 is also a valid setting and force the NE together with a similar entry in sheArpFixedIpAddressTable to retrieve the needed information automatically.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheBridgePortPppoaSessionId 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.18
The session id from a PPP server is for the PPPoA session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheBridgePortMcastMaxJoinedGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.19
The maximum number of multicast group's (channels) that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. This configuration is only valid for bridgeports with usage 'subscriber'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..32 | 255  

sheBridgePortMcastLeaveMode 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.20
If normal leave is enabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If fast leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. New with R2.8: If ehtMode ('explicit host tracking') is enabled, the multicaststream will only be deleted from FDB if all members of this stream has send her leave.
Status: current Access: read-only
OBJECT-TYPE    
  SheMcastLeaveMode  

sheBridgePortMcastEHTMode 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.21
Enables or disables the 'explicit host tracking' function. If enabled and fastleave-mode is also running, the multicaststream will only be deleted from FDB if all members of this stream has send her leave. Note: Functionality bundled in McastLeaveMode with SHE R2.8.
Status: obsolete Access: read-only
OBJECT-TYPE    
  SheEnableType  

sheBridgePortIgmpSubscriberAccessMode 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.22
When sheBridgePortIgmpSubscriberAccessMode is set to 0, it means the access mode is IPoE, when set to 1, it means the access mode is PPPoE. Note: Merged parameter for SHE R2.4. R2.8 will not use this configuration and ignore any modification.
Status: obsolete Access: read-only
OBJECT-TYPE    
  SheBridgePortIgmpSubscriberAccessModeType  

sheBridgePortInnerPriorityOption 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.23
This parameter configures the handling of the inner vlan tag in the doubleTagged scenario. In singleTagged Mode, this parameter definition is not used. If tagged frames are received set the .1p priority bits of this tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> no change of the received .1p priority force(3) -> per port configured .1p (sheBridgePortInnerPriority) If a tag is added to an upstream user frame, because untagged frames are received set the .1p priority bits of the added tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortInnerPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortInnerPriority) New parameters with SHE R2.7 Expanded with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortPriorityOptionType  

sheBridgePortOuterPriorityOption 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.24
This parameter configures the handling of the outer vlan tag in the doubleTagged and singleTagged scenario. doubleTagged Scenario: If tagged frames are received set the .1p priority bits of the added outer tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> copy .1p priority from the assigned inner .1p priority (inner to outer) force(3) -> per port configured .1p (sheBridgePortPriority) If two tag's are added to an upstream user frame, because untagged frames are received set the .1p priority bits of the added outer tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortPriority) singleTagged Scenario: If tagged frames are received set the .1p priority bits of the tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> no change of the received .1p priority force(3) -> per port configured .1p (sheBridgePortPriority) If untagged frames are received set the .1p priority bits of the added tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortPriority) New parameters with SHE R2.7 Expanded with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortPriorityOptionType  

sheBridgePortPriorityMapIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.25
This is a pointer to a mapping entry DSCP to .1p. Value 0 (default) means there is no mapping in use or the IU specific assignment via sheBridgeIUDscpPriorityMapIndex will be used. One of these two pointer's (port specific or IU global) must be valid if sheBridgePortPriorityOption is dscp(1) and sheBridgePortUsage is subscriber(4). Used if a tag is added to an upstream user frame and sheBridgePortPriorityOption is dscp to set .1p bits. Used if an upstream user frame is tagged and sheBridgePortPriorityOption is dscp for .1p range check. NOTE: Convergate based IU's could only support ONE profile for all port's were these mapping should be used!! New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..16  

sheBridgePortIpAddressPermitCount 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.26
Maximum number of possible IpAddresses per BridgePort. The assignment could be done via DHCP or fixedIpAddress configuration. Note: There is an additional restriction of possible IpAddresses per UNI port which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. Additional restrictions could be possible in case of using IpAntispoofing feature. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeMaxIpAddressType  

sheBridgePortMatEnabled 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.27
Enable or disable the MAC address translation feature on bridgePort base. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheBridgePortIpAsMode 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.28
This configuration enable/disable the feature IpAntispoofing on bridgePort base. Depending on the used mode, the IU could made the following checks: offIpAs(0) -> IpAs disabled onIpAsNoVlanCheck(1) -> IpAs enabled, Only frames with configured Ip will be forwarded. onIpAsInnerVlanCheck(2) -> IpAs enabled, Only frames with configured couple Ip-InnerTag will be forwarded. onIpAsOuterVlanCheck(3) -> IpAs enabled, Only frames with configured couple Ip-OuterTag will be forwarded. onIpAsBothVlanCheck(4) -> IpAs enabled, Only frames with configured triple Ip-InnerTag-OuterTag will be forwarded. All other frames will be discarded. Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies, don't care which onIpAsxxx - mode was selected. Only cards with convergate chipset will made the requested differentiation. There is an additional global switch for IpAs available (sheIpAntiSpoofingEnable), which will outvote this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortIpAsModeType  

sheBridgePortEtypeVlanMapProfilePtr 1.3.6.1.4.1.231.7.1.2.1.4.1.3.1.29
Ethertype-VLAN mapping profile pointer to sheBridgePortEtypeVlanMapTable (sheBridgePortEtypeVlanMapProfIndex). This attribute is optional and the pointer is null when it is not assigned. Note: The bridgeport has to be untagged member of the mapped vlan, assigned via these profile. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..100  

sheBridgePortControl 1.3.6.1.4.1.231.7.1.2.1.4.1.4
OBJECT IDENTIFIER    

sheBridgePortControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.1.4.1
setBridgePortVLANDefaults: sheBridgePortControlIndex sheBridgePortControlPVID sheBridgePortControlPriority setBridgePortUsage: sheBridgePortControlIndex sheBridgePortControlUsage setBridgePortHostConfigurationProtocol: sheBridgePortControlIndex sheBridgePortControlHostConfigurationProtocol sheBridgePortControlCircuitId setBridgePortMaxLearnPermitCount: sheBridgePortControlIndex sheBridgePortControlMaxLearnPermitCount setBridgePortMcastGroupPackageList: sheBridgePortControlIndex sheBridgePortControlMcastGroupPackageList setBridgePortFeature: sheBridgePortControlIndex sheBridgePortControlMode sheBridgePortControlTaggingMode sheBridgePortControlReplaceTag setBridgePortCircuitId: sheBridgePortControlIndex sheBridgePortControlCircuitId setBridgePortRemoteId: sheBridgePortControlIndex sheBridgePortControlRemoteId clearBridgePortCircuitId: sheBridgePortControlIndex clearBridgePortRemoteId: sheBridgePortControlIndex setBridgePortInnerPVID: sheBridgePortControlIndex sheBridgePortControlInnerPVID setBridgePortInnerPriority: sheBridgePortControlIndex sheBridgePortControlInnerPriority setBridgePortIpoaProviderRouterIpAddress: sheBridgePortControlIndex sheBridgePortControlIpoaProviderRouterIpAddress setBridgePortMcastParameter: sheBridgePortControlIndex sheBridgePortControlMcastMaxJoinedGroup sheBridgePortControlMcastLeaveMode sheBridgePortControlMcastEHTMode (obsolete with R2.8) setBridgePortIgmpSubscriberAccessMode sheBridgePortControlIndex sheBridgePortControlIgmpSubscriberAccessMode New with R2.7: setBridgePortPriorityOptions sheBridgePortControlIndex sheBridgePortControlInnerPriorityOption sheBridgePortControlOuterPriorityOption sheBridgePortControlPriorityMapIndex (new with R2.8) New with R2.8: setBridgePortMatEnabled sheBridgePortControlIndex sheBridgePortControlMatEnabled setBridgePortIpAddressPermitCount sheBridgePortControlIndex sheBridgePortControlIpAddressPermitCount setBridgePortIpAsMode (165) sheBridgePortControlIndex sheBridgePortControlIpAsMode ->sheBridgePortIpAsModeModified setBridgePortEtypeVlanMapping (166) sheBridgePortControlIndex sheBridgePortControlEtypeVlanMapProfilePtr ->sheBridgePortEtypeVlanMappingModified
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheBridgePortControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.4.2
The index of the bridgePort to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheBridgePortControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.1.4.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheBridgePortControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.1.4.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheBridgePortControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.1.4.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheBridgePortControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.1.4.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgePortControlPVID 1.3.6.1.4.1.231.7.1.2.1.4.1.4.7
The PVID for that port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheBridgePortControlPriority 1.3.6.1.4.1.231.7.1.2.1.4.1.4.8
Set the default port priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sheBridgePortControlUsage 1.3.6.1.4.1.231.7.1.2.1.4.1.4.9
Only the values uplink, cascading, and subcascading could be interchanged. For the feature singleMacMultipleVcc, it is possible to aggregate two or more single VCC's of one physical adsl-link to the vccAggregator. The usage of the single PVC - bridgeports (subscriber) could be set to vccAggregated and the special bridgeport change his usage from vccAggregatorNotUsed to ..Used in that case. It is also possible to set this special bridgeport usage directly and in that case all bridgeports with identical sublayerindex will change her usage to vccAggregated. This configuration has additional restrictions for PVID and priority configuration. Check MSC for detailes. All other changes will be done by NE automatically based on other configurations.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgePortUsageType  

sheBridgePortControlHostConfigurationProtocol 1.3.6.1.4.1.231.7.1.2.1.4.1.4.10
Used host configuration protocol. Valid values could none(0), useDHCP(1), usePPPoE(2).
Status: current Access: read-write
OBJECT-TYPE    
  SheHostConfigurationProtocolType  

sheBridgePortControlMaxLearnPermitCount 1.3.6.1.4.1.231.7.1.2.1.4.1.4.11
look at table. Note: Syntax modified with R2.8 BFR 2.0.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0 | 1..2147483647  

sheBridgePortControlMcastGroupPackageList 1.3.6.1.4.1.231.7.1.2.1.4.1.4.12
This bridgePort is user of this MCastGroup-Package.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheBridgePortControlCircuitId 1.3.6.1.4.1.231.7.1.2.1.4.1.4.13
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sheBridgePortControlMode 1.3.6.1.4.1.231.7.1.2.1.4.1.4.14
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgePortModeType  

sheBridgePortControlTaggingMode 1.3.6.1.4.1.231.7.1.2.1.4.1.4.15
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgePortTaggingModeType  

sheBridgePortControlRemoteId 1.3.6.1.4.1.231.7.1.2.1.4.1.4.16
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sheBridgePortControlInnerPVID 1.3.6.1.4.1.231.7.1.2.1.4.1.4.17
The Inner PVID of this bridgePort. Taken if no other rule given for VLAN association. The default Value is the bridgePortIndex +1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheBridgePortControlReplaceVlanTag 1.3.6.1.4.1.231.7.1.2.1.4.1.4.18
Configure a Vlan-Tag which should be replaced by PVID. Check table entry for details. NOTE: Modified with R2.8. CG based IU's could only support one vlan tag per IU. This configuration is now used for enable/disable the feature on bridgeport-base. For enable, only the configured value from the IU global configuration will be accepted!
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4093  

sheBridgePortControlInnerPriority 1.3.6.1.4.1.231.7.1.2.1.4.1.4.19
The inner priority of this bridgePort. Taken if no other rule given for VLAN association. The default value is the '0'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sheBridgePortControlIpoaProviderRouterIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.1.4.20
look at table
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheBridgePortControlMcastMaxJoinedGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.4.21
The maximum number of multicast group's that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..32 | 255  

sheBridgePortControlMcastLeaveMode 1.3.6.1.4.1.231.7.1.2.1.4.1.4.22
Modify subscriber leave mode.
Status: current Access: read-write
OBJECT-TYPE    
  SheMcastLeaveMode  

sheBridgePortControlMcastEHTMode 1.3.6.1.4.1.231.7.1.2.1.4.1.4.23
Enables or disables the 'explicit host tracking' function. NOTE: Functionality bundled in McastLeaveMode with SHE R2.8. Will not longer used by R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheEnableType  

sheBridgePortControlIgmpSubscriberAccessMode 1.3.6.1.4.1.231.7.1.2.1.4.1.4.24
When sheBridgePortIgmpSubscriberAccessMode is set to 0, it means the access mode is IPoE, when set to 1, it means the access mode is PPPoE. Note: Merged parameter for SHE R2.4. R2.8 will not use this configuration and ignore any modification.
Status: obsolete Access: read-write
OBJECT-TYPE    
  SheBridgePortIgmpSubscriberAccessModeType  

sheBridgePortControlInnerPriorityOption 1.3.6.1.4.1.231.7.1.2.1.4.1.4.25
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgePortPriorityOptionType  

sheBridgePortControlOuterPriorityOption 1.3.6.1.4.1.231.7.1.2.1.4.1.4.26
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgePortPriorityOptionType  

sheBridgePortControlPriorityMapIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.4.27
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..16  

sheBridgePortControlIpAddressPermitCount 1.3.6.1.4.1.231.7.1.2.1.4.1.4.28
look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeMaxIpAddressType  

sheBridgePortControlMatEnabled 1.3.6.1.4.1.231.7.1.2.1.4.1.4.29
Enable or disable the MAC address translation feature on bridgePort base.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheBridgePortControlIpAsMode 1.3.6.1.4.1.231.7.1.2.1.4.1.4.30
This configuration enable/disable the feature IpAntispoofing on bridgePort base. Depending on the used mode, the IU could made the following checks: offIpAs(0) -> IpAs disabled onIpAsNoVlanCheck(1) -> IpAs enabled, Only frames with configured Ip will be forwarded. onIpAsInnerVlanCheck(2) -> IpAs enabled, Only frames with configured couple Ip-InnerTag will be forwarded. onIpAsOuterVlanCheck(3) -> IpAs enabled, Only frames with configured couple Ip-OuterTag will be forwarded. onIpAsBothVlanCheck(4) -> IpAs enabled, Only frames with configured triple Ip-InnerTag-OuterTag will be forwarded. All other frames will be discarded. Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies, don't care which onIpAsxxx - mode was selected. Only cards with convergate chipset will made the requested differentiation. There is an additional global switch for IpAs available (sheIpAntiSpoofingEnable), which will outvote this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgePortIpAsModeType  

sheBridgePortControlEtypeVlanMapProfilePtr 1.3.6.1.4.1.231.7.1.2.1.4.1.4.31
Ethertype-VLAN mapping profile pointer to sheBridgePortEtypeVlanMapTable (sheBridgePortEtypeVlanMapProfIndex). This attribute is optional and the pointer is null when it is not assigned. New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..100  

sheBridgePortNotifications 1.3.6.1.4.1.231.7.1.2.1.4.1.5
OBJECT IDENTIFIER    

sheBridgeBaseParamModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.1
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortCreated 1.3.6.1.4.1.231.7.1.2.1.4.1.5.2
A new bridgePort was created.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortDeleted 1.3.6.1.4.1.231.7.1.2.1.4.1.5.3
A bridgePort was deleted.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortVlanDefaultsModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.4
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortUsageModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.5
BridgePort usage modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortHostConfigurationProtocolModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.6
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortMaxLearnPermitCountModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.7
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortMcastGroupPackageListModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.8
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortFeatureModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.9
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgeMacProfileSrcMacAddressModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.10
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortCircuitIdModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.11
send trap when bridgeport circuitid is set.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortRemoteIdModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.12
send trap when bridgeport remoteid is set.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortCircuitIdCleared 1.3.6.1.4.1.231.7.1.2.1.4.1.5.13
send trap when bridgeport circuitid is cleared.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortRemoteIdCleared 1.3.6.1.4.1.231.7.1.2.1.4.1.5.14
send trap when bridgeport remoteid is cleared.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortInnerPVIDModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.15
send trap when bridgeport inner PVID is set.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortInnerPriorityModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.16
send trap when bridgeport inner priority is set.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortIpoaProviderRouterIpAddressModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.17
send trap when bridgeport IPoA provider edge router's ip address is set.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortMcastParameterModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.18
send trap when bridgeport mcast parameter is set.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortIgmpSubscriberAccessModeModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.19
send trap when bridgeport igmp subscriber Access mode is set.
Status: obsolete Access: read-write
NOTIFICATION-TYPE    

setBridgePortPriorityOptionsModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.20
send trap when configuration of PriorityOptions parameters was modified
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortMatEnabledModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.21
send trap when configuration of MatEnabled on BridgePort base was modified
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortIpAddressPermitCountModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.22
send trap when configuration of permit count for DHCP was modified
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortPrioMapEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.1.5.23
a complete entry (64 dscp entries) with a default mapping is created
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortPrioMapEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.1.5.24
a complete entry (64 dscp entries) is deleted
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortPrioMapEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.25
a single dscp entry is modified
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortExtMCastParameterModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.28
send trap when bridgeport R2.8 mcast parameter are set.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheEtypeVlanMapProfEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.1.5.29
A new sheBridgePortEtypeVlanMapProfile was created in the NE. New with SHE R2.8.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheEtypeVlanMapProfEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.30
A sheBridgePortEtypeVlanMapProfile was modified in the NE. New with SHE R2.8.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheEtypeVlanMapProfEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.1.5.31
A sheBridgePortEtypeVlanMapProfile was deleted in the NE. New with SHE R2.8.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortIpAsModeModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.32
The bridgePort specific IpAs mode was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortEtypeVlanMappingModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.33
The bridgePort specific EthertypeVlanMapping profile assignment was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgeExtResidentialModeModified 1.3.6.1.4.1.231.7.1.2.1.4.1.5.40
The port specific ext-residential mode was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgeMacProfileTable 1.3.6.1.4.1.231.7.1.2.1.4.1.6
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheBridgeMacProfileEntry

sheBridgeMacProfileEntry 1.3.6.1.4.1.231.7.1.2.1.4.1.6.1
Needed for feature IpoA. Configure the used Mac-Address if this bridgeport is running in IpoA-Mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheBridgeMacProfileEntry  

sheBridgeMacProfileSrcMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.1.6.1.1
The used Src-MacAddress if this port is running in IpoA - mode. If address 000000 is set, the NE will autogenerate a valid mac-address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheBridgeMacProfileControl 1.3.6.1.4.1.231.7.1.2.1.4.1.7
OBJECT IDENTIFIER    

sheBridgeMacProfileControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.1.7.1
setBridgeMacProfileSrcMacAddress: sheBridgeMacProfileControlIndex sheBridgeMacProfileControlSrcMacAddress
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheBridgeMacProfileControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.7.2
The index of the bridgePort to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheBridgeMacProfileControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.1.7.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheBridgeMacProfileControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.1.7.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheBridgeMacProfileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.1.7.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheBridgeMacProfileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.1.7.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgeMacProfileControlSrcMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.1.7.7
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheBridgeIUConfig 1.3.6.1.4.1.231.7.1.2.1.4.1.8
OBJECT IDENTIFIER    

sheBridgeIUProfileTable 1.3.6.1.4.1.231.7.1.2.1.4.1.8.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheBridgeIUProfileEntry

sheBridgeIUProfileEntry 1.3.6.1.4.1.231.7.1.2.1.4.1.8.1.1
Needed to configure some IU specific settings. Index should be the entPhysicalIndex of the IU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheBridgeIUProfileEntry  

sheBridgeIUPPPoASrcMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.1.8.1.1.1
The used Src-MacAddress for this IU if one of her port's is running in PPPoA - mode. The PPPoA session is translated to PPPoE. This configuration should be made before a port could be switched to PPPoA - mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheBridgeIUProfileUsedMATBasis 1.3.6.1.4.1.231.7.1.2.1.4.1.8.1.1.2
This parameter select the basis for MAT on these IU. This will NOT enable the MAT feature himself, but select the valid configuration for this IU. If useMATperVlan (default) is selected, the settings of sheBridgePortMatEnabled will be ignored. Only settings of sheVlanMatEnable are valid, if the VLAN is used on this IU. If useMATperBridgeport is selected, the handling will be done in an opposite way. If the used basis should be changed, a reboot of the corresponding IU may be needed to come operational. New parameter with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeIUProfileUsedMATBasisType  

sheBridgeIUReplaceVlanTag 1.3.6.1.4.1.231.7.1.2.1.4.1.8.1.1.3
If configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature for this IU. Only valid for IU Bridgeport's which are running tagged(1) mode and only if the NE global tagging mode is singleTag. NOTE: New with R2.8. Configuration was moved from sheBridgePortTable. The corresponding entry in the bridgeport table enable/disable the feature per bridgeport.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheBridgeIUDscpPriorityMapIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.8.1.1.4
This is a pointer to a mapping entry DSCP to .1p. Value 0 (default) means there is no mapping in use or the port specific assignment via sheBridgePortPriorityMapIndex will be used. One of these two pointer's (port specific or IU global) must be valid if sheBridgePortPriorityOption is dscp(1) and sheBridgePortUsage is subscriber(4). Used if a tag is added to an upstream user frame and sheBridgePortPriorityOption is dscp to set .1p bits. Used if an upstream user frame is tagged and sheBridgePortPriorityOption is dscp for .1p range check. NOTE: Convergate based IU's could only support ONE profile for all port's were these mapping should be used!! New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..16  

sheBridgeIUProfileControl 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2
OBJECT IDENTIFIER    

sheBridgeIUProfileControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.1
setBridgeIUProfilePPPoASrcMacAddress (131): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlPPPoASrcMacAddress New with R2.8: setBridgeIUProfileUsedMATBasis (132): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlUsedMATBasis setBridgeIUProfileReplaceVlanTag (133): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlReplaceVlanTag setBridgeIUProfileDscpPriorityMapProfileIndex (134): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlDscpPriorityMapIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheBridgeIUProfileControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.2
The index of the IU to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  PhysicalIndex  

sheBridgeIUProfileControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheBridgeIUProfileControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheBridgeIUProfileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheBridgeIUProfileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgeIUProfileControlPPPoASrcMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.7
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheBridgeIUProfileControlUsedMATBasis 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.8
This parameter select the basis for MAT on these IU. This will NOT enable the MAT feature himself, but select the valid configuration for this IU. If useMATperVlan (default) is selected, the settings of sheBridgePortMatEnabled will be ignored. Only settings of sheVlanMatEnable are valid, if the VLAN is used on this IU. If useMATperBridgeport is selected, the handling will be done in an opposite way. If the used basis should be changed, a reboot of the corresponding IU may be needed to come operational. New parameter with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeIUProfileUsedMATBasisType  

sheBridgeIUProfileControlReplaceVlanTag 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.9
If configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature for this IU. Only valid for IU Bridgeport's which are running tagged(1) mode and only if the NE global tagging mode is singleTag. NOTE: New with R2.8. Configuration was moved from sheBridgePortTable. The corresponding entry in the bridgeport table enable/disable the feature per bridgeport.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheBridgeIUProfileControlDscpPriorityMapIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.8.2.10
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..16  

sheBridgeIUNotifications 1.3.6.1.4.1.231.7.1.2.1.4.1.8.3
OBJECT IDENTIFIER    

sheBridgeIUProfilePPPoASrcMacAddressModified 1.3.6.1.4.1.231.7.1.2.1.4.1.8.3.1
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgeIUProfileUsedMATBasisModified 1.3.6.1.4.1.231.7.1.2.1.4.1.8.3.2
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgeIUProfileReplaceVlanTagModified 1.3.6.1.4.1.231.7.1.2.1.4.1.8.3.3
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgeIUProfileDscpPriorityMapProfileIndexModified 1.3.6.1.4.1.231.7.1.2.1.4.1.8.3.4
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBridgePortPriorityMapConfig 1.3.6.1.4.1.231.7.1.2.1.4.1.9
OBJECT IDENTIFIER    

sheBridgePortPriorityMapTable 1.3.6.1.4.1.231.7.1.2.1.4.1.9.1
A mapping profile DSCP to .1p. Used if a tag is added to an upstream user frame (when sheBridgePortTaggingMode is untagged or tagged) and sheBridgePortPriorityOption is dscp. The first table index is the profile number. The second table index and the mapping key is the DSCP field. One default profile with index 1 always exist and can't be deleted but modified.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheBridgePortPriorityMapEntry

sheBridgePortPriorityMapEntry 1.3.6.1.4.1.231.7.1.2.1.4.1.9.1.1
A mapping entry DSCP to .1p. Used if a tag is added to an upstream user frame (when sheBridgePortTaggingMode is untagged or tagged) and sheBridgePortPriorityOption is dscp. The first table index is the entry index. The second table index and the mapping key is the DSCP field. One default mapping entry with index 1 always exist and can't be deleted but modified.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheBridgePortPriorityMapEntry  

sheBridgePortPriorityMapEntryIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.9.1.1.1
The number of the mapping profile is the first table index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..16  

sheBridgePortPriorityMapDscp 1.3.6.1.4.1.231.7.1.2.1.4.1.9.1.1.2
Bits 2-7 of TOS field of IP header are called DSCP. DSCP 000000 is the lowest priority (best effort). This is the second table index and the mapping key. Since zero is not allowed as table index, this value is increased by 1 (range is 1..64).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..64  

sheBridgePortPriorityMapPrio 1.3.6.1.4.1.231.7.1.2.1.4.1.9.1.1.3
The .1p priority bits in the VLAN tag is the mapping value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheBridgePortPriorityMapControl 1.3.6.1.4.1.231.7.1.2.1.4.1.9.2
OBJECT IDENTIFIER    

sheBridgePortPrioMapControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.1.9.2.1
One default mapping entry with index 1 always exist and can't be deleted but modified. createBridgePortPrioMapEntry - a complete profile (64 entries) with a default mapping is created deleteBridgePortPrioMapEntry sheBridgePortPrioMapControlIndex - a complete profile (64 entries) is deleted modifyBridgePortPrioMapEntry sheBridgePortPrioMapControlIndex sheBridgePortPrioMapControlDscp sheBridgePortPrioMapControlPrio - a single entry of a profile is modified
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheBridgePortPrioMapControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.9.2.2
The number of the mapping entry is the first table index.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

sheBridgePortPrioMapControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.1.9.2.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheBridgePortPrioMapControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.1.9.2.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheBridgePortPrioMapControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.1.9.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheBridgePortPrioMapControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.1.9.2.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgePortPrioMapControlDscp 1.3.6.1.4.1.231.7.1.2.1.4.1.9.2.7
Bits 2-7 of TOS field of IP header are called DSCP. DSCP 000000 is the lowest priority (best effort). This is the second table index and the mapping key. Since zero is not allowed as table index, this value is increased by 1 (range is 1..64).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..64  

sheBridgePortPrioMapControlPrio 1.3.6.1.4.1.231.7.1.2.1.4.1.9.2.8
The .1p priority bits in the VLAN tag is the mapping value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheBridgePortMCastConfig 1.3.6.1.4.1.231.7.1.2.1.4.1.10
OBJECT IDENTIFIER    

sheBridgePortMCastConfigTable 1.3.6.1.4.1.231.7.1.2.1.4.1.10.1
This table contain all new defined bridgePort specific multicast configurations. New supported with SHE R2.8!
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheBridgePortMCastConfigEntry

sheBridgePortMCastConfigEntry 1.3.6.1.4.1.231.7.1.2.1.4.1.10.1.1
The MCast configuration settiongs per BridgePort.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheBridgePortMCastConfigEntry  

sheBridgePortMCastBandwithLimit 1.3.6.1.4.1.231.7.1.2.1.4.1.10.1.1.1
This is the configured multicast bandwith limitation per bridgePort. 0 kbps indicates that no multicast traffic is allowed for the bport. The value 65535 (0xFFFF) is a special value and means unlimited access for this bridgeport (switch off feature AC - admission control - default). New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..500 | 65535  

sheBridgePortMCastMinUCBandwithLimit 1.3.6.1.4.1.231.7.1.2.1.4.1.10.1.1.2
This is the minimum bandwidth of sustainable unicast traffic for a bridge port. M/C admission control shall include this minimum bandwidth of sustainable unicast traffic within the calculation to reserve a minimum bandwidth for VoD services. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..500  

sheBridgePortMCastMaxJoinedNonPremiumGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.10.1.1.3
The maximum number of non-premium multicast group's (channels) that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..32 | 255  

sheBridgePortMCastRemainBandwith 1.3.6.1.4.1.231.7.1.2.1.4.1.10.1.1.4
It is the remaining multicast bandwidth of a bridge port. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..500  

sheBridgePortMCastACStatus 1.3.6.1.4.1.231.7.1.2.1.4.1.10.1.1.5
It indicates the AC (admission control) status of a bridgeport, It can be accept or deny. When it is accepted, it indicates the bridgeport still has enough bandwidth for multicast access. When it is denied, it indicates the bridgeport is short of bandwidth for multicast access. 1 means accept, 0 means deny. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortACStatus  

sheBridgePortMCastControl 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2
OBJECT IDENTIFIER    

sheBridgePortMCastControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2.1
setBridgePortExtMCastParameter(162): sheBridgePortMCastControlIndex sheBridgePortMCastControlBandwithLimit sheBridgePortMCastControlMinUCBandwithLimit sheBridgePortMCastControlMaxJoinedNonPremiumGroup
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheBridgePortMCastControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2.2
The index of the bridgePort to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheBridgePortMCastControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheBridgePortMCastControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheBridgePortMCastControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheBridgePortMCastControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgePortMCastControlBandwithLimit 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2.11
This is the configured multicast bandwith limitation per bridgePort. 0 kbps indicates that no multicast traffic is allowed for the bport. The value 655353 (0xFFFF) is a special value and means unlimited access for this bridgeport (switch off feature AC - admission control). New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..500 | 65535  

sheBridgePortMCastControlMinUCBandwithLimit 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2.12
This is the minimum bandwidth of sustainable unicast traffic for a bridge port. M/C admission control shall include this minimum bandwidth of sustainable unicast traffic within the calculation to reserve a minimum bandwidth for VoD services. New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..500  

sheBridgePortMCastControlMaxJoinedNonPremiumGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.10.2.13
The maximum number of non-premium multicast group's that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..32 | 255  

sheBridgePortEtherTypeConfig 1.3.6.1.4.1.231.7.1.2.1.4.1.11
OBJECT IDENTIFIER    

sheBridgePortEtypeVlanMapTable 1.3.6.1.4.1.231.7.1.2.1.4.1.11.1
This table is used with SHE R2.8. Ethertype-VLAN mapping profiles. Index is the profile index.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheBridgePortEtypeVlanMapEntry

sheBridgePortEtypeVlanMapEntry 1.3.6.1.4.1.231.7.1.2.1.4.1.11.1.1
This table is used with SHE R2.8. Ethertype-VLAN mapping profiles. Index is the profile index.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheBridgePortEtypeVlanMapEntry  

sheBridgePortEtypeVlanMapProfIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.11.1.1.1
The Ethertype-VLAN mapping profile index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheBridgePortEtypeVlanMapEthertype 1.3.6.1.4.1.231.7.1.2.1.4.1.11.1.1.2
That is a list of possible 16bit protocol type field's of the ethernet frames. The octet string is a list of two octet entries each identifying an ethertyp value The least significant byte is the second octet. The octet string has a variable length of up to 16 octets (max. 8 ethertypes in the list). examples: 0x0800 IP Internet Protocol (IPv4) 0x0806 Address Resolution Protocol (ARP) 0x8100 VLAN Tag (VLAN) 0x8863 PPPoE Discovery 0x8864 PPPoE Session The VlanMapping is applied to upstream frames matching this Ethertype's. Other frames are forwarded unchanged.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

sheBridgePortEtypeVlanMapVlanId 1.3.6.1.4.1.231.7.1.2.1.4.1.11.1.1.3
A VLAN identifier mapped to the Ethertype's.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4093  

sheBridgePortEtypeVlanMapPriority 1.3.6.1.4.1.231.7.1.2.1.4.1.11.1.1.4
The priority part of the VLAN tag mapped to the Ethertype's.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheBridgePortEtypeVlanMapControl 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2
OBJECT IDENTIFIER    

sheBridgePortEtypeVlanMapControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2.1
the command to be executed createEtypeVlanMapProfEntry (171) sheBridgePortEtypeVlanMapCtrlEthertype sheBridgePortEtypeVlanMapCtrlVlanId sheBridgePortEtypeVlanMapCtrlPriority ->sheEtypeVlanMapProfEntryCreated modifyEtypeVlanMapProfEntry (172) sheBridgePortEtypeVlanMapCtrlProfIndex sheBridgePortEtypeVlanMapCtrlEthertype sheBridgePortEtypeVlanMapCtrlVlanId sheBridgePortEtypeVlanMapCtrlPriority ->sheEtypeVlanMapProfEntryModified deleteEtypeVlanMapProfEnty (173) sheBridgePortEtypeVlanMapCtrlProfIndex ->sheEtypeVlanMapProfEntryDeleted
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheBridgePortEtypeVlanMapControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheBridgePortEtypeVlanMapControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgePortEtypeVlanMapControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheBridgePortEtypeVlanMapControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgePortEtypeVlanMapCtrlProfIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2.6
The Ethertype-VLAN mapping profile index (first index).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheBridgePortEtypeVlanMapCtrlEthertype 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2.7
That is a list of possible 16bit protocol type field's of the ethernet frames. The octet string is a list of two octet entries each identifying an ethertyp value. The least significant byte is the second octet. The octet string has a variable length of up to 16 octets (max. 8 ethertypes in the list). examples: 0x0800 IP Internet Protocol (IPv4) 0x0806 Address Resolution Protocol (ARP) 0x8100 VLAN Tag (VLAN) 0x8863 PPPoE Discovery 0x8864 PPPoE Session The VlanMapping is applied to upstream frames matching this Ethertype's. Other frames are forwarded unchanged.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

sheBridgePortEtypeVlanMapCtrlVlanId 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2.8
A VLAN identifier mapped to the Ethertype's.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4093  

sheBridgePortEtypeVlanMapCtrlPriority 1.3.6.1.4.1.231.7.1.2.1.4.1.11.2.9
The priority part of the VLAN tag mapped to the Ethertype's.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheBridgeExtResidentialConfig 1.3.6.1.4.1.231.7.1.2.1.4.1.99
OBJECT IDENTIFIER    

sheBridgeExtResidentialTable 1.3.6.1.4.1.231.7.1.2.1.4.1.99.1
Only supported by SHE hiX5608 !! Table index is the ifIndex of uplink or trunk interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheBridgeExtResidentialEntry

sheBridgeExtResidentialEntry 1.3.6.1.4.1.231.7.1.2.1.4.1.99.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheBridgeExtResidentialEntry  

sheBridgeExtResidentialMode 1.3.6.1.4.1.231.7.1.2.1.4.1.99.1.1.1
A ext-residential mode: enable/disable
Status: current Access: read-only
OBJECT-TYPE    
  SheEnableType 0..1  

sheBridgeExtResidentialState 1.3.6.1.4.1.231.7.1.2.1.4.1.99.1.1.2
Operative role of the port. (uplink,cascading,aggregated,notUsed, ...)
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortUsageType  

sheBridgeExtResidentialControl 1.3.6.1.4.1.231.7.1.2.1.4.1.99.2
OBJECT IDENTIFIER    

sheBridgeExtResidentialControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.1.99.2.1
New with R2.8 - Only supported by SHE hiX5608 !!: setExtResidentialMode (990): sheBridgeExtResidentialControlPortIndex sheBridgeExtResidentialControlMode ->sheBridgeExtResidentialModeModified
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheBridgeExtResidentialControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.1.99.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheBridgeExtResidentialControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.1.99.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheBridgeExtResidentialControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.1.99.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheBridgeExtResidentialControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.1.99.2.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBridgeExtResidentialControlPortIndex 1.3.6.1.4.1.231.7.1.2.1.4.1.99.2.6
Set the port index.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

sheBridgeExtResidentialControlMode 1.3.6.1.4.1.231.7.1.2.1.4.1.99.2.7
Set the ext-residential mode.
Status: current Access: read-write
OBJECT-TYPE    
  SheEnableType  

sheBridgeConformance 1.3.6.1.4.1.231.7.1.2.1.4.1.100
OBJECT IDENTIFIER    

sheBridgeCompliances 1.3.6.1.4.1.231.7.1.2.1.4.1.100.1
OBJECT IDENTIFIER    

sheBridgeCompliance 1.3.6.1.4.1.231.7.1.2.1.4.1.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheBridgeGroups 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2
OBJECT IDENTIFIER    

sheBridgeBaseGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBridgeBaseControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBridgePortGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBridgePortControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.4
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBridgeNotificationsGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.5
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheBridgeMacProfileGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.6
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBridgeIUProfileGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.7
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBridgeIUNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.8
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheBridgePortPriorityMapGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.9
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBridgePortMCastGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.10
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBridgePortMCastNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.11
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheBridgePortObsoleteGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.12
Description.
Status: obsolete Access: read-write
OBJECT-GROUP    

sheBridgePortEtypeGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.14
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBridgeObsoleteNotificationsGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.15
Description.
Status: obsolete Access: read-write
NOTIFICATION-GROUP    

sheBridgeExtResidentialGroup 1.3.6.1.4.1.231.7.1.2.1.4.1.100.2.16
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheVlan 1.3.6.1.4.1.231.7.1.2.1.4.2
OBJECT IDENTIFIER    

sheVlanTable 1.3.6.1.4.1.231.7.1.2.1.4.2.1
The vlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheVlanEntry

sheVlanEntry 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1
One entry for every existing vlan in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheVlanEntry  

sheVlanIndex 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.1
A vlan-identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheVlanName 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.2
A descriptional name for that vlan. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheVlanStatus 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.3
static, in future gvrp values: static(1), dynamic(2)
Status: current Access: read-only
OBJECT-TYPE    
  SheVlanStatusType  

sheVlanEgressPorts 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.4
Portlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..65535)  

sheVlanUnTaggedPorts 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.5
Portlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..65535)  

sheVlanFdbId 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.6
First index of the used Filtering Table. The value would be in current implementation identical to the VlanIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheVlanCreationTime 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.7
Only useful in case of gvrp.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheVlanMulticastPermission 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.8
Permission to transmit multicast-traffic. If a vlan has this permission, it could transmit multicast-traffic or igmp-request's. Transmission of non MC traffic is always possible. NOTE: SHE R2.6 will not longer support this configuration. A McastPermission per Vlan is not needed anymore and each existing Vlan is able to transport mcast traffic.
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheVlanDhcpProviderIndex 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.9
Points to the Vlan associated Dhcp-Provider entry in the DhcpProvider-Table. Default 0 -> DHCP Relay for this Vlan is deactivated. This value should also be 0 if this vlan will be used as a DHCP or PPPoE provider vlan (sheDhcpVlanId).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheVlanDefaultGateway 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.10
Only needed if this VLAN is used as subscriber Vlan (PVID for a bridgeport) and the corresponding bridgeport use IpoA mode. Otherwise don't care. NOTE: Configuration not longer needed with R2.8. Funcionality replaced by bridgePort configuration of sheBridgePortIpoaProviderRouterIpAddress.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheVlanPPPoEProviderIndex 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.11
Points to the Vlan associated PPPoE-Provider entry in the DhcpProvider-Table. Default 0 -> PPPoE Relay for this Vlan is deactivated. This value should also be 0 if this vlan will be used as a PPPoE or DHCP provider vlan (sheDhcpVlanId).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheVlanMgmtVlan 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.12
Specify the VLAN that doesn't allows for subscriber ports to be joined.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sheVlanServiceTagOnly 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.13
A customer tag is not expected for the VLAN in the double tagging mode. Note: This configuration is not longer supported with SHE R2.6.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheVlanAgeingTime 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.14
MAC aging time for the VLAN. If the value is '0', it means that aging time for the VLAN follows global agiang time which is defined as 'sheFdbBaseAgeingTime'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000  

sheVlanRoutingMode 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.15
Generally, the default routing mode is residential; all packets cannot be forwarded between subscribers on the same VLAN. But if this mode is true, the communication between subscribers becomes available. (Default: false).
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeRoutingModeType  

sheVlanTunnelingL2Protocol 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.16
If L2VPN is supported, all L2 protocol packets should be set as flood or drop. The value of this attribute is true, all L2 protocol packets is flooded to customers networks. (Default: false). Note: This configuration is not longer supported with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheVlanServiceType 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.17
Define a tagging/stripping method in NE DT mode. 1 - It is a DoubleTagging mode for a VLAN. It strips both C-tag and S-tag in DSLAM. 2 - It is a VlanStacking mode for a VLAN. It strips an S-tag in DSLAM.
Status: current Access: read-only
OBJECT-TYPE    
  SheVlanServiceType  

sheVlanDlfFlood 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.18
If it is enabled, DLF packets should be flooded to the line card which is set to sheVlanDlfFloodCard regardless of BridgeBase DLF state. In case it is disabled, handling of DLF packets comply with BridgeBase DLF state. The maxium number of vlan which is set to enable is 50. (Default:false)
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheVlanDlfFloodCard 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.19
The entPhysicalIndex of the line card where to flood DLF packets from uplink
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

sheVlanCCMode 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.21
This parameter describes the handling of broadcast (bc), unknown multicast (umc) and unknown unicast (uuc) traffic for this vlan. If cross connect mode is True all these packets are flooded in the VLAN otherwise they are droped. Supported by R2.5.1 and higher.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheVlanRouted 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.22
Configure the handling of ARP request's in the NE for this vlan. Valid values: switching - A ARP request from Network side will be answered with CPE mac address. routing - A ARP request from Network side will be answered with DSLAM mac address. Supported by R2.5.1 and higher.
Status: current Access: read-only
OBJECT-TYPE    
  SheVlanRoutedType  

sheVlanMcastFlood 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.23
If it is enabled, all mcast packets should be flooded in this vlan.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheVlanMatEnable 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.24
Enable or disable the MAC address translation feature on Vlan base. The feature will use the ingress vlan to decide if the mac address of a member bridgePort should be translated. For bridgePorts they receive only untagged frames, the feature could be enabled via the PVID vlan.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheVlanSubportServiceName 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.26
The format identifier %R in sheBridgeBaseCircuitIdFormat, sheBridgePortCircuitId, sheBridgeBaseRemoteIdFormat and sheBridgePortRemoteId is replaced by this string. If the string is empty, %R is replaced by the VLAN ID. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

sheVlanUplinkTranslationVlan 1.3.6.1.4.1.231.7.1.2.1.4.2.1.1.27
This parameter enable a bidirectional vlanTranslation on Uplink side. The Vlan, identified by sheVlanIndex of this table-entry (subscriber side) will be translated to the vlan configured with this parameter. 0 - disabled -> is the default value and will disable the vlan translation. 65535 - usedAsTranslationVlan -> this vlan is already in use as an Translation-Vlan and could not be translated This configuration will only be valid for protocolframes, which are routed via hostprocessor. SharedVlanLearning has to be enabled (bridgeBase parameter)! For translation of usertraffic, additional rules has to be configured!
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4093 | 65535  

sheVlanControl 1.3.6.1.4.1.231.7.1.2.1.4.2.2
OBJECT IDENTIFIER    

sheVlanControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.2.2.1
createVlan: sheVlanControlIndex sheVlanControlName sheVlanControlEgressPorts sheVlanControlUntaggedPorts sheVlanControlMulticastPermision (obsolete) sheVlanControlDhcpProviderIndex sheVlanControlPPPoEProviderIndex deleteVlan: sheVlanControlIndex setVlanName: sheVlanControlIndex sheVlanControlName setVlanPorts: - change complete Portlist sheVlanControlIndex sheVlanControlEgressPorts sheVlanControlUnTaggedPorts setVlanMulticastPermission (will not longer supported with R2.6) sheVlanControlIndex sheVlanControlMulticastPermission setVlanDhcpProviderIndex: sheVlanControlIndex sheVlanControlDhcpProviderIndex setVlanDefaultGateway: sheVlanControlIndex sheVlanControlDefaultGateway setVlanPppoeProviderIndex: sheVlanControlIndex sheVlanControlPPPoEProviderIndex setVlanMgmtVlan: sheVlanControlIndex sheVlanControlMgmtVlan setVlanServiceTagOnly:(not longer supported with R2.6) sheVlanControlIndex sheVlanControlServiceTagOnly setVlanAgeingTime: sheVlanControlIndex sheVlanControlAgeingTime setVlanRoutingMode: sheVlanControlIndex sheVlanControlRoutingMode setVlanTunnelingL2Protocol: sheVlanControlIndex sheVlanControlTunnelingL2Protocol setVlanServiceType: sheVlanControlIndex sheVlanControlServiceType addVlanPorts: - add Ports to Portlist sheVlanControlIndex sheVlanControlEgressPorts sheVlanControlUnTaggedPorts deleteVlanPorts: - delete Ports from Portlist sheVlanControlIndex sheVlanControlEgressPorts setVlanDlfFlood: sheVlanControlIndex sheVlanControlDlfFlood sheVlanControlDlfFloodCard setVlanCCMode(230), sheVlanControlIndex sheVlanControlCCMode setVlanRouted(231), sheVlanControlIndex sheVlanControlRouted setVlanMcastFlood(232), sheVlanControlIndex sheVlanControlMcastFlood setVlanMatEnable(233), sheVlanControlIndex sheVlanControlMatEnable setVlanTranslation(235) sheVlanControlIndex sheVlanControlUplinkTranslationVlan modifySubportServiceName (242) sheVlanControlIndex sheVlanControlSubportServiceName
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheVlanControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.2.2.2
Index of the table entry to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheVlanControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.2.2.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheVlanControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.2.2.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheVlanControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.2.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheVlanControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.2.2.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheVlanControlName 1.3.6.1.4.1.231.7.1.2.1.4.2.2.7
A descriptional name for that vlan. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheVlanControlEgressPorts 1.3.6.1.4.1.231.7.1.2.1.4.2.2.8
Portlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..65535)  

sheVlanControlUnTaggedPorts 1.3.6.1.4.1.231.7.1.2.1.4.2.2.9
Portlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..65535)  

sheVlanControlMulticastPermission 1.3.6.1.4.1.231.7.1.2.1.4.2.2.10
Permission to transmit multicast-traffic. If a vlan has this permission, it could transmit multicast-traffic or igmp-request's. Transmission of non MC traffic is always possible. NOTE: SHE R2.6 will not longer support this configuration. A McastPermission per Vlan is not needed anymore and each existing Vlan is able to transport mcast traffic.
Status: current Access: read-write
OBJECT-TYPE    
  ShePermissionType  

sheVlanControlDhcpProviderIndex 1.3.6.1.4.1.231.7.1.2.1.4.2.2.11
Points to the Vlan associated Dhcp-Provider entry in the DhcpProvider-Table. Default 0 -> DHCP Relay for this Vlan is deactivated.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheVlanControlDefaultGateway 1.3.6.1.4.1.231.7.1.2.1.4.2.2.12
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheVlanControlPPPoEProviderIndex 1.3.6.1.4.1.231.7.1.2.1.4.2.2.13
Points to the Vlan associated PPPoE-Provider entry in the DhcpProvider-Table. Default 0 -> PPPoE Relay for this Vlan is deactivated.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheVlanControlMgmtVlan 1.3.6.1.4.1.231.7.1.2.1.4.2.2.14
Specify the VLAN that doesn't allow subscribers to join.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sheVlanControlServiceTagOnly 1.3.6.1.4.1.231.7.1.2.1.4.2.2.15
A customer tag is not expected for the VLAN in the double tagging mode. Note: This configuration is not longer supported with SHE R2.6.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheVlanControlAgeingTime 1.3.6.1.4.1.231.7.1.2.1.4.2.2.16
MAC aging time for the VLAN. If the value is '0', it means that aging time for the VLAN follows global agiang time which is defined as 'sheFdbBaseAgeingTime'.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100000  

sheVlanControlRoutingMode 1.3.6.1.4.1.231.7.1.2.1.4.2.2.17
Generally, the default routing mode is residential; all packets cannot be forwarded between subscribers on the same VLAN. But if this mode is true, the communication between subscribers becomes available. (Default: false).
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeRoutingModeType  

sheVlanControlTunnelingL2Protocol 1.3.6.1.4.1.231.7.1.2.1.4.2.2.18
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheVlanControlServiceType 1.3.6.1.4.1.231.7.1.2.1.4.2.2.19
Set a tagging/stripping method in NE DT mode.
Status: current Access: read-write
OBJECT-TYPE    
  SheVlanServiceType  

sheVlanControlDlfFlood 1.3.6.1.4.1.231.7.1.2.1.4.2.2.20
If it is enabled, DLF packets should be flooded to the line card which is set to sheVlanDlfFloodCard regardless of BridgeBase DLF state. In case it is disabled, handling of DLF packets comply with BridgeBase DLF state. The maxium number of vlan which is set to enable is 50. (Default:false)
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheVlanControlDlfFloodCard 1.3.6.1.4.1.231.7.1.2.1.4.2.2.21
The entPhysicalIndex of the line card where to flood DLF packets from uplink
Status: current Access: read-write
OBJECT-TYPE    
  PhysicalIndex  

sheVlanControlCCMode 1.3.6.1.4.1.231.7.1.2.1.4.2.2.22
look at table
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheVlanControlRouted 1.3.6.1.4.1.231.7.1.2.1.4.2.2.23
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheVlanRoutedType  

sheVlanControlMcastFlood 1.3.6.1.4.1.231.7.1.2.1.4.2.2.24
If it is enabled, all mcast packets should be flooded in this vlan.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheVlanControlMatEnable 1.3.6.1.4.1.231.7.1.2.1.4.2.2.25
Enable or disable the MAC address translation feature on Vlan base. The feature will use the ingress vlan to decide if the mac address of a member bridgePort should be translated. For bridgePorts they receive only untagged frames, the feature could be enabled via the PVID vlan.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheVlanControlSubportServiceName 1.3.6.1.4.1.231.7.1.2.1.4.2.2.27
The format identifier %R in sheBridgeBaseCircuitIdFormat, sheBridgePortCircuitId, sheBridgeBaseRemoteIdFormat and sheBridgePortRemoteId is replaced by this string. If the string is empty, %R is replaced by the VLAN ID.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

sheVlanControlUplinkTranslationVlan 1.3.6.1.4.1.231.7.1.2.1.4.2.2.28
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheVlanNotifications 1.3.6.1.4.1.231.7.1.2.1.4.2.3
OBJECT IDENTIFIER    

sheVlanCreated 1.3.6.1.4.1.231.7.1.2.1.4.2.3.1
A new vlan was created.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanModified 1.3.6.1.4.1.231.7.1.2.1.4.2.3.2
A vlan was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanDeleted 1.3.6.1.4.1.231.7.1.2.1.4.2.3.3
A vlan was deleted.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanPortsModified 1.3.6.1.4.1.231.7.1.2.1.4.2.3.4
A vlan portlist was modified by command setVlanPorts.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanMgmtVlanChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.5
A vlan is assigned as Mgmt-Vlan.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanServiceTagOnlyChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.6
A customer tagging policy for a VLAN has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanAgeingTimeChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.7
MAC ageing time for a VLAN has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanRoutingModeChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.8
Local switching for a VLAN has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanTunnelingL2ProtocolChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.9
L2 protocol for a VLAN has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanServiceTypeChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.10
Vlan service type for a VLAN has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanDlfFloodChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.11
A policy for handling Dlf packets has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanPortslistModified 1.3.6.1.4.1.231.7.1.2.1.4.2.3.12
Configuration trap after changing the current vlan portlist's by using the commands addVlanPorts or deleteVlanPorts.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanCCModeChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.13
configuration trap
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanRoutedChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.14
configuration trap
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanMcastFloodChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.15
configuration trap
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanMatEnableChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.16
MAC address translation feature on Vlan base changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanSubportServiceNameModified 1.3.6.1.4.1.231.7.1.2.1.4.2.3.18
configuration trap
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanUplinkTranslationChanged 1.3.6.1.4.1.231.7.1.2.1.4.2.3.19
Configuration modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheVlanConformance 1.3.6.1.4.1.231.7.1.2.1.4.2.100
OBJECT IDENTIFIER    

sheVlanCompliances 1.3.6.1.4.1.231.7.1.2.1.4.2.100.1
OBJECT IDENTIFIER    

sheVlanCompliance 1.3.6.1.4.1.231.7.1.2.1.4.2.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheVlanGroups 1.3.6.1.4.1.231.7.1.2.1.4.2.100.2
OBJECT IDENTIFIER    

sheVlanGroup 1.3.6.1.4.1.231.7.1.2.1.4.2.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheVlanControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.2.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheVlanNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.2.100.2.3
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheRulesAndMetering 1.3.6.1.4.1.231.7.1.2.1.4.3
OBJECT IDENTIFIER    

sheRuleTable 1.3.6.1.4.1.231.7.1.2.1.4.3.1
The she rule table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheRuleEntry

sheRuleEntry 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1
Define pattern, matches and action's for Rule Controls.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheRuleEntry  

sheRuleIndex 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.1
A userflow-identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheRuleType 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.2
This type defines the set of used pattern and actions for a rule of type. Inside one rule all used match-values have to be exact or exclude. Ignore is don't care. globalSrcMacDeny(1) Type = 1 Name = SourceMacPattern = SourceMacMatch = exact Action = Deny portFlowControl(2) Type = 2 Name = BridgePortPattern = BridgePortMatch = exact SourceMacPattern = SourceMacMatch = exact Action = Allow meteringBridgePort(3) Type = 3 Name = Priority = BridgePortPattern = BridgePortMatch = exact Action = Meter ActionParameter01 = Profile qosVlan(4) Type = 4 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority qosDscp(5) Type = 5 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority qosBridgePort(6) Type = 6 Name = Priority = BridgePortPattern = BridgePortMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority providerDoubleTagVlan01(7) Type = 7 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId qosDoubleTagPriority01(8) type = 8 Name = Priority = PriorityPattern = PriorityMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId qosDoubleTagDscp01(9) type = 9 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId providerDoubleTagVlan02(10) Type = 10 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority qosDoubleTagPriority02(11) type = 11 Name = Priority = PriorityPattern = PriorityMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority qosDoubleTagDscp(12) type = 12 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority mirrorBridgePort(13) Type = 13 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = mirror qosDscp02(14) type = 14 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeInnerVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority portFlowControl02(15) Type = 15 Name = Priority = DscpPattern = DscpMatch = exact BridgePortPattern = BridgePortMatch = exact Action = deny providerSingleTagVlan01(16) sheRuleControlType= 16 sheRuleControlName = sheRuleControlPriority = sheRuleControlVlanIdPattern = sheRuleControlVlanIdMatch = exact sheRuleControlAction = changeInnerVlan sheRuleControlActionParameter01 = new VlanId providerSingleTagVlan02(17) sheRuleControlType= 17 sheRuleControlName = sheRuleControlPriority = sheRuleControlVlanIdPattern = sheRuleControlVlanIdMatch = exact sheRuleControlAction = changeInnerVlanTag sheRuleControlActionParameter01 = newVlanId sheRuleControlActionParameter02 = new Priority portFlowControl03(18) sheRuleControlType= 18 sheRuleControlName = portEtherTypVlan sheRuleControlPriority = sheRuleControlEtherTypPattern = xx sheRuleControlEtherTypMatch = exact sheRuleControlBridgePortPattern = yy sheRuleControlBridgePortMatch = exact sheRuleControlAction = changeInnerVlan sheRuleControlActionParameter01 = new PVID cosTranslation(19) sheRuleControlType= 19 sheRuleControlName = cosTranslation sheRuleControlPriority = sheRuleControlPriorityPattern = xx sheRuleControlPriorityMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty etherTypTranslation(20) sheRuleControlType= 20 sheRuleControlName = etherTypTranslation sheRuleControlPriority = sheRuleControlEtherTypPattern = xx sheRuleControlEtherTypMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty vlanTranslation(21) sheRuleControlType= 21 sheRuleControlName = vlanTranslation sheRuleControlPriority = sheRuleControlVlanIdPattern = xx sheRuleControlVlanIdMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty dscpTranslation(22) sheRuleControlType= 22 sheRuleControlName = dscpTranslation sheRuleControlPriority = sheRuleControlDscpPattern = xx sheRuleControlDscpMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty New with SHE R2.7: meteringDot1P(25) Type = 25 Name = Priority = BridgePortPattern = BridgePortMatch = exact PriorityPattern = PriorityMatch = exact Action = Meter ActionParameter01 = MeterProfile New with SHE R2.8: meteringVlan(26) (currently support only by WIN/CNX IU) Type = 26 Name = Priority = VlanIdPattern = VlanIdMatch = exact IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDhcpOnIU(27) (currently support only by WIN/CNX IU's) Type = 27 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDhcpOnPort(28) (currently support only by CG IU's) Type = 28 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringArpOnIU(29) (currently support only by WIN/CNX IU's) Type = 29 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringArpOnPort(30) (currently support only by CG IU's) Type = 30 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringIgmpOnIU(31) (currently support only by WIN/CNX IU's) Type = 31 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringIgmpOnPort(32) (currently support only by CG IU's) Type = 32 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDslPort(33) (currently support only by CG IU's) Type = 33 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile ######## genericRule(50) sheRuleControlType= 50 In case of using the genericRule-Type the set of used pattern matches and action are not fixed. The NE has to parse the complete control-group and the managment system must send the complete control-group, but only pattern with a match-value unequal ignore will be evaluated. Be careful!! genericAdminRule(51) sheRuleControlType= 51 In case of using the genericAdminRule-Type the set of used pattern matches and action are not fixed. The NE has to parse the complete control-group and the managment system must send the complete control-group, but only pattern with a match-value unequal ignore will be evaluated. Be careful!! The only difference to rule-type 50, genericRule, is, that the AdminRule will complete handled by CXU-Software, without support of switching fabric!!
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleType  

sheRuleName 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.3
A descriptional userflow-name. The name should be unique. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sheRulePriority 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.4
The priority of the rule. Usefull in case of multiple matches.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

sheRuleBridgePortPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.5
A sheBridgePortIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheRuleBridgePortMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.6
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleSourceMacPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.7
A single source mac-address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleSourceMacMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.8
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleSourceMacStartPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.9
A source mac-address to define the start point of a address range.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleSourceMacStopPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.10
A source mac-address to define the end point of a address range.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleSourceMacRangeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.11
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleDestinationMacPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.12
A single destination mac-address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleDestinationMacMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.13
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleDestinationMacStartPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.14
A destination mac-address to define the start point of a address range.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleDestinationMacStopPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.15
A destination mac-address to define the end point of a address range.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleDestinationMacRangeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.16
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleVlanIdPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.17
A sheVlanIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheRuleVlanIdMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.18
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRulePriorityPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.19
A .1p priority value. Range is 0-7.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

sheRulePriorityMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.20
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleTosPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.21
A tos value. Range is 0..255. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

sheRuleTosMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.22
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleDscpPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.23
A dscp value. Range is 0-63. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

sheRuleDscpMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.24
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleEtherTypePattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.25
A ethertype pattern match.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

sheRuleEtherTypeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.26
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleSourceIpAddressPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.27
A single source ip-address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheRuleSourceIpAddressMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.28
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleSourceIpSubnetMaskPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.29
A source ip-address subnet mask.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheRuleSourceIpSubnetMaskMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.30
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleDestinationIpAddressPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.31
A single destination ip-address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheRuleDestinationIpAddressMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.32
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleDestinationIpSubnetMaskPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.33
A destination ip-address subnet mask.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheRuleDestinationIpSubnetMaskMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.34
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleSourcePortPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.35
TCP/UDP Port. Source- or DestinationPort will only be evaluated if a IpProtocolPattern equal Udp or Tcp is given.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheRuleSourcePortMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.36
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleDestinationPortPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.37
TCP/UDP Port. Source- or DestinationPort will only be evaluated if a IpProtocolPattern equal Udp or Tcp is given.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheRuleDestinationPortMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.38
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleAction 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.39
Gives the action for the defined userflow. deny(1), allow(2), meter(3), changeInnerVlan(4), changeOuterVlan(5), changeInnerPriority(6), changeOuterPriority(7), changeTos(8), changeDscp(9), changeInnerVlanTag(10), changeOuterVlanTag(11), assignTC(12) mirror(13),
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleActionType  

sheRuleActionParameter01 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.40
Define an additional parameter depence on the used action. deny,allow,mirror: not used changeTos: new Tos value changeDscp: new Dscp value changeInnerVlan: new Vlan Id changeOuterVlan: new Vlan Id meter: meterProfileIndex changeInnerPriority: new Priority (1p) changeOuterPriority: new Priority (1p) assignTC: Traffic class values 0-7 changeInnerVlanTag: new Vlan Id changeOuterVlanTag: new Vlan Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheRuleActionParameter02 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.41
Define an additional parameter depence on the used action. deny,allow,mirror,changeTos, changeDscp, changeInnerVlan, changeOuterVlan, meter, changeInnerPriority, changeOuterPriority, assignTC, mirror: not used changeInnerVlanTag: new Priority (1p) changeOuterVlanTag: new Priority (1p)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheRuleFlowPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.42
The flow-direction for which this rule should work. 1 - upstream 2 - downstream 3 - bidirectional
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleFlowType  

sheRuleFlowMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.43
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleIpProtocolPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.44
Used L4-ProtocolType. Needed to evaluate the correct Ip-PortPattern (look at RFC791).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

sheRuleIpProtocolMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.45
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleIpPrecedencePattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.46
A Ip precedence value 0-7. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleIpPrecedenceMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.47
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleSourceMacMaskPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.48
Bit mask for sheRuleSourceMacPattern. Will be evaluated by NE only if sheRuleSourceMacPattern is given. The NE assumes #ffffffffffff as default if no mask is present.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..6)  

sheRuleSourceMacMaskMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.49
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleDestinationMacMaskPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.50
Bit mask for sheRuleDestinationMacPattern. Will be evaluated by NE only if sheRuleDestinationMacPattern is given. The NE assumes #ffffffffffff as default if no mask is present.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..6)  

sheRuleDestinationMacMaskMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.51
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleMessageTypePattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.52
Message Type. Currently used only if IP Protocol pattern is set to ICMP (RFC950). Otherwise ignored.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheRuleMessageTypeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.53
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleMessageCodePattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.54
CodeType. Currently used only if IP Protocol pattern is set to ICMP and a MessageType Pattern is given (RFC950). Otherwise ignored.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheRuleMessageCodeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.55
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleGenericMatchAction 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.56
Handle packet as follows if rule match. - deny(0) Drops matching packets. Action parameter: none - allow(1) Permits matching packets. Action parameter: none - meter(2) Maps an rate limiting profile. Action parameter: sheRuleGenericMatchActionMeterIndex - redirect(3) Redirects matching packets to given bridge port (uplink interface). Action parameter: sheRuleGenericMatchActionRedirPort - mirror(4) Copies matching packets to mirror monitor port. Action parameter: none - setDscp(5) Sets DSCP value in matching packets. Action parameter: sheRuleGenericMatchActionDscp - setPriority(6) Schedules matching frames (queue mapping) according given priority value. Action parameter: sheRuleGenericMatchActionSetPrio - changeTagPriority(7) Changes .1p priority value in VLAN tag. Action parameter: sheRuleGenericMatchActionSetTagPrio - changeTagPriorityWithTos(8) Copies IP Precedence Bits of TOS field into .1p priority of VLAN tag. Action parameter: none - setIpPrecedence(9) Sets IP Precedence bits in TOS field. Action parameter: sheRuleGenericMatchActionIpPrecedence - changeTosWithTagPrio(10) Action parameter: none - rateLimit(11) Applies rate limiting for matching packets. Action parameter: sheRuleGenericMatchActionRate - changeVlanId(12) Changes Vlan-ID in VLAN-Tag of matching frames. Action parameter: sheRuleActionVlan - copyToCpu(13) Copies matching frames to CPU port. Action parameter: none - count(14) Initiates counting of matching packets. The NE supports only a limited number of counters at the same time and may reject this rule if the number of timers is exceeded. - untag (15) untag the frame
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleGenericActionType  

sheRuleGenericNoMatchAction 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.57
Handle packet as follows if rule not match. - deny(0) Drops matching packets. Action parameter: none - allow(1) Permits matching packets. Action parameter: none - meter(2) Maps an rate limiting profile. Action parameter: sheRuleGenericNoMatchActionMeterIndex - redirect(3) Redirects matching packets to given bridge port (uplink interface). Action parameter: sheRuleGenericNoMatchActionRedirPort - mirror(4) Copies matching packets to mirror monitor port. Action parameter: none - setDscp(5) Sets DSCP value in matching packets. Action parameter: sheRuleGenericNoMatchActionDscp - setPriority(6) Schedules matching frames (queue mapping) according given priority value. Action parameter: sheRuleActionSetPrio - changeTagPriority(7) Changes .1p priority value in VLAN tag. Action parameter: sheRuleGenericNoMatchActionSetTagPrio - changeTagPriorityWithTos(8) Copies IP Precedence Bits of TOS field into .1p priority of VLAN tag. Action parameter: none - setIpPrecedence(9) Sets IP Precedence bits in TOS field. Action parameter: sheRuleGenericNoMatchActionIpPrecedence - changeTosWithTagPrio(10) Action parameter: none - rateLimit(11) Applies rate limiting for matching packets. Action parameter: sheRuleGenericNoMatchActionRate - changeVlanId(12) Changes Vlan-ID in VLAN-Tag of matching frames. Action parameter: sheRuleGenericNoMatchActionVlan - copyToCpu(13) Copies matching frames to CPU port. Action parameter: none - count(14) Initiates counting of matching packets. The NE supports only a limited number of counters at the same time and may reject this rule if the number of timers is exceeded. - untag (15) untag the frame
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleGenericActionType  

sheRuleGenericMatchActionParameterMeterIndex 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.58
Metering Profile Index used by genericrule action: meter(2)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheRuleGenericMatchActionParameterRedirPort 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.59
BridgePort Index used by rule action: redirect(3)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheRuleGenericMatchActionParameterDscp 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.60
DSCP value used by rule action: setDscp(5)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..63  

sheRuleGenericMatchActionParameterPriority 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.61
Priority value used by rule action: setPriority(6)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleGenericMatchActionParameterTagPriority 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.62
Priority value used by rule action: changeTagPriority(7)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleGenericMatchActionParameterIpPrecedence 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.63
IP Precedence value used by rule action: setIpPrecedence(9)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheRuleGenericMatchActionParameterRate 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.64
Rate limit value (MBit per second) used by rule action: rateLimit(11)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheRuleGenericMatchActionParameterVlanId 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.65
Vlan ID used by rule action: changeVlanId(12)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4093  

sheRuleGenericNoMatchActionParameterMeterIndex 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.66
Metering Profile Index used by rule action: ---
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheRuleGenericNoMatchActionParameterRedirPort 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.67
BridgePort Index used by rule action: redirect(3)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheRuleGenericNoMatchActionParameterDscp 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.68
DSCP value used by rule action: setDscp(5)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..63  

sheRuleGenericNoMatchActionParameterPriority 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.69
Priority value used by rule action: setPriority(6)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleGenericNoMatchActionParameterTagPriority 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.70
Priority value used by rule action: changeTagPriority(7)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleGenericNoMatchActionParameterIpPrecedence 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.71
IP Precedence value used by rule action: setIpPrecedence(9)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheRuleGenericNoMatchActionParameterRate 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.72
Rate limit value (MBit per second) used by rule action: rateLimit(11)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheRuleGenericNoMatchActionParameterVlanId 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.73
Vlan ID used by rule action: changeVlanId(12)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4093  

sheRuleMatchCounter 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.74
Number of matches (how often the rule has been matched). Note: Not all rules types support counters. The NE responds the value -1 if there is no counter available.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..2147483647  

sheRuleActivationState 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.75
Show the activation state of a rule. A change of this value will not be notified by trap.
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleActivationStateType  

sheRuleInnerVlanIdPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.76
Match the inner vlanid under double-tag mode.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheRuleInnerVlanIdMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.77
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleInnerPriorityPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.78
Match the inner .1p priority under double-tag mode.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

sheRuleInnerPriorityMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.79
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleIUPhysIndexPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.82
Match the IU entPhysIndex from entPhysicalTable.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

sheRuleIUPhysIndexMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.83
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRulePortIfIndexPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.84
Match the DSL port ifIndex from ifTable.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

sheRulePortIfIndexMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.1.1.85
Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControl 1.3.6.1.4.1.231.7.1.2.1.4.3.2
OBJECT IDENTIFIER    

sheRuleControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.3.2.1
createRule: sheRuleControlName ... minimum of one pair of pattern-match-combination with a match-value unequal to ignore ... sheRuleControlAction sheRuleControlActionParameter01 ... deleteRule: sheRuleControlIndex clearRuleMatchCounter: sheRuleControlIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheRuleControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.3.2.2
The index of the deleted rule.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheRuleControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.3.2.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheRuleControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.3.2.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheRuleControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.3.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheRuleControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.3.2.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheRuleControlType 1.3.6.1.4.1.231.7.1.2.1.4.3.2.7
This type defines the set of used pattern and actions for this rule: look at rule-table.
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleType  

sheRuleControlName 1.3.6.1.4.1.231.7.1.2.1.4.3.2.8
A descriptional userflow-name. The name should be unique, but there is a exception: In case of using a expand-Ruletype, the name of the expanding rule must be equal to the original rule, which should be expanded. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sheRuleControlPriority 1.3.6.1.4.1.231.7.1.2.1.4.3.2.9
The priority of the rule. Usefull in case of multiple matches.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sheRuleControlBridgePortPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.10
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheRuleControlBridgePortMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.11
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlSourceMacPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.12
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleControlSourceMacMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.13
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlSourceMacStartPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.14
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleControlSourceMacStopPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.15
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleControlSourceMacRangeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.16
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlDestinationMacPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.17
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleControlDestinationMacMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.18
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlDestinationMacStartPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.19
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleControlDestinationMacStopPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.20
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheRuleControlDestinationMacRangeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.21
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlVlanIdPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.22
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheRuleControlVlanIdMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.23
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlPriorityPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.24
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

sheRuleControlPriorityMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.25
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlTosPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.26
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

sheRuleControlTosMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.27
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlDscpPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.28
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

sheRuleControlDscpMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.29
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlEtherTypePattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.30
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

sheRuleControlEtherTypeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.31
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlSourceIpAddressPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.32
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheRuleControlSourceIpAddressMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.33
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlSourceIpSubnetMaskPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.34
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheRuleControlSourceIpSubnetMaskMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.35
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlDestinationIpAddressPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.36
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheRuleControlDestinationIpAddressMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.37
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlDestinationIpSubnetMaskPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.38
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheRuleControlDestinationIpSubnetMaskMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.39
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlSourcePortPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.40
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheRuleControlSourcePortMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.41
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlDestinationPortPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.42
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheRuleControlDestinationPortMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.43
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlAction 1.3.6.1.4.1.231.7.1.2.1.4.3.2.44
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleActionType  

sheRuleControlActionParameter01 1.3.6.1.4.1.231.7.1.2.1.4.3.2.45
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheRuleControlActionParameter02 1.3.6.1.4.1.231.7.1.2.1.4.3.2.46
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheRuleControlFlowPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.47
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleFlowType  

sheRuleControlFlowMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.48
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlIpProtocolPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.49
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

sheRuleControlIpProtocolMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.50
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlIpPrecedencePattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.51
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleControlIpPrecedenceMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.52
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlSourceMacMaskPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.53
look at table
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..6)  

sheRuleControlSourceMacMaskMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.54
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlDestinationMacMaskPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.55
look at table
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..6)  

sheRuleControlDestinationMacMaskMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.56
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlMessageTypePattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.57
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheRuleControlMessageTypeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.58
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlMessageCodePattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.59
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheRuleControlMessageCodeMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.60
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlGenericMatchAction 1.3.6.1.4.1.231.7.1.2.1.4.3.2.61
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleGenericActionType  

sheRuleControlGenericNoMatchAction 1.3.6.1.4.1.231.7.1.2.1.4.3.2.62
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleGenericActionType  

sheRuleControlGenericMatchActionParameterMeterIndex 1.3.6.1.4.1.231.7.1.2.1.4.3.2.63
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheRuleControlGenericMatchActionParameterRedirPort 1.3.6.1.4.1.231.7.1.2.1.4.3.2.64
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheRuleControlGenericMatchActionParameterDscp 1.3.6.1.4.1.231.7.1.2.1.4.3.2.65
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

sheRuleControlGenericMatchActionParameterPriority 1.3.6.1.4.1.231.7.1.2.1.4.3.2.66
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleControlGenericMatchActionParameterTagPriority 1.3.6.1.4.1.231.7.1.2.1.4.3.2.67
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleControlGenericMatchActionParameterIpPrecedence 1.3.6.1.4.1.231.7.1.2.1.4.3.2.68
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheRuleControlGenericMatchActionParameterRate 1.3.6.1.4.1.231.7.1.2.1.4.3.2.69
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheRuleControlGenericMatchActionParameterVlanId 1.3.6.1.4.1.231.7.1.2.1.4.3.2.70
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4093  

sheRuleControlGenericNoMatchActionParameterMeterIndex 1.3.6.1.4.1.231.7.1.2.1.4.3.2.71
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheRuleControlGenericNoMatchActionParameterRedirPort 1.3.6.1.4.1.231.7.1.2.1.4.3.2.72
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheRuleControlGenericNoMatchActionParameterDscp 1.3.6.1.4.1.231.7.1.2.1.4.3.2.73
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

sheRuleControlGenericNoMatchActionParameterPriority 1.3.6.1.4.1.231.7.1.2.1.4.3.2.74
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleControlGenericNoMatchActionParameterTagPriority 1.3.6.1.4.1.231.7.1.2.1.4.3.2.75
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheRuleControlGenericNoMatchActionParameterIpPrecedence 1.3.6.1.4.1.231.7.1.2.1.4.3.2.76
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheRuleControlGenericNoMatchActionParameterRate 1.3.6.1.4.1.231.7.1.2.1.4.3.2.77
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheRuleControlGenericNoMatchActionParameterVlanId 1.3.6.1.4.1.231.7.1.2.1.4.3.2.78
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4093  

sheRuleControlInnerVlanIdPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.79
Match the inner vlanid under double-tag mode.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheRuleControlInnerVlanIdMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.80
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlInnerPriorityPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.81
look at table
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sheRuleControlInnerPriorityMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.82
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlIUPhysIndexPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.85
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  PhysicalIndex  

sheRuleControlIUPhysIndexMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.86
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleControlPortIfIndexPattern 1.3.6.1.4.1.231.7.1.2.1.4.3.2.87
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

sheRuleControlPortIfIndexMatch 1.3.6.1.4.1.231.7.1.2.1.4.3.2.88
look at rule table...
Status: current Access: read-write
OBJECT-TYPE    
  SheRuleMatchType  

sheRuleNotifications 1.3.6.1.4.1.231.7.1.2.1.4.3.3
OBJECT IDENTIFIER    

sheRuleCreated 1.3.6.1.4.1.231.7.1.2.1.4.3.3.1
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheRuleDeleted 1.3.6.1.4.1.231.7.1.2.1.4.3.3.2
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheRuleModified 1.3.6.1.4.1.231.7.1.2.1.4.3.3.3
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMeterProfileTable 1.3.6.1.4.1.231.7.1.2.1.4.3.4
The meter profile table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheMeterProfileEntry

sheMeterProfileEntry 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1
One entry for each metering profile. Selection of the used profile will be done via rule-configuration. Note: DS policing will currently not supported by the NE (information stand R2.8)!
Status: current Access: not-accessible
OBJECT-TYPE    
  SheMeterProfileEntry  

sheMeterProfileIndex 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.1
A profile-table index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheMeterProfileName 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.2
A descriptional name for this metering profile. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheMeterProfileCir 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.3
The Committed Information Rate for upstream policing. ATTENTION: CIR smaller or equal PIR
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100000  

sheMeterProfileCbs 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.4
The Committed Burst Size for upstream policing. ATTENTION: CBS smaller or equal PBS (MBS)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 96..10000  

sheMeterProfilePir 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.5
The peak information rate for upstream policing. ATTENTION: CIR smaller or equal PIR
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100000  

sheMeterProfilePbs 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.6
The peak burst size (or maximum burst size MBS) for upstream policing. ATTENTION: CBS smaller or equal PBS (MBS)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 96..15000  

sheMeterProfileDsCir 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.7
The Committed Information Rate for downstream policing. ATTENTION: DsCIR smaller or equal DsPIR
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100000  

sheMeterProfileDsCbs 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.8
The Committed Burst Size for downstream policing. ATTENTION: DsCBS smaller or equal DsPBS (MBS)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 96..10000  

sheMeterProfileDsPir 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.9
The peak information rate for downstream policing. ATTENTION: DsCIR smaller or equal DsPIR
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100000  

sheMeterProfileDsPbs 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.10
The peak burst size (or maximum burst size MBS) for downstream policing. ATTENTION: DsCBS smaller or equal DsPBS (MBS)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 96..15000  

sheMeterProfileUseParameters 1.3.6.1.4.1.231.7.1.2.1.4.3.4.1.13
This defines a bit-map for using the meterprofile parameter settings. If the corresponding bit is set to one the parameters should be used. - policingUS(0) - policingDS(1) Note: DS policing will currently not supported by the NE (information stand R2.8)!
Status: current Access: read-only
OBJECT-TYPE    
  SheMeterProfileUseParametersType  

sheMeterControl 1.3.6.1.4.1.231.7.1.2.1.4.3.5
OBJECT IDENTIFIER    

sheMeterControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.3.5.1
createMeterProfile: sheMeterControlProfileName sheMeterControlProfileCir sheMeterControlProfileCbs sheMeterControlProfilePir sheMeterControlProfilePbs sheMeterControlProfileDsCir sheMeterControlProfileDsCbs sheMeterControlProfileDsPir sheMeterControlProfileDsPbs sheMeterControlProfileDsShapingCir sheMeterControlProfileDsShapingCbs sheMeterControlProfileUseParameters deleteMeterProfile: sheMeterControlIndex modifyMeterProfile: sheMeterControlIndex sheMeterControlProfileName sheMeterControlProfileCir sheMeterControlProfileCbs sheMeterControlProfilePir sheMeterControlProfilePbs sheMeterControlProfileDsCir sheMeterControlProfileDsCbs sheMeterControlProfileDsPir sheMeterControlProfileDsPbs sheMeterControlProfileDsShapingCir sheMeterControlProfileDsShapingCbs sheMeterControlProfileUseParameters
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheMeterControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.3.5.2
Index of the configured table entry. Needed for modify or delete.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheMeterControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.3.5.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheMeterControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.3.5.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheMeterControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.3.5.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheMeterControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.3.5.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMeterControlProfileName 1.3.6.1.4.1.231.7.1.2.1.4.3.5.7
look at meterProfileTable... Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheMeterControlProfileCir 1.3.6.1.4.1.231.7.1.2.1.4.3.5.8
look at meterProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100000  

sheMeterControlProfileCbs 1.3.6.1.4.1.231.7.1.2.1.4.3.5.9
look at meterProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 96..10000  

sheMeterControlProfilePir 1.3.6.1.4.1.231.7.1.2.1.4.3.5.10
look at meterProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100000  

sheMeterControlProfilePbs 1.3.6.1.4.1.231.7.1.2.1.4.3.5.11
look at meterProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 96..15000  

sheMeterControlProfileDsCir 1.3.6.1.4.1.231.7.1.2.1.4.3.5.12
look at meterProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100000  

sheMeterControlProfileDsCbs 1.3.6.1.4.1.231.7.1.2.1.4.3.5.13
look at meterProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 96..10000  

sheMeterControlProfileDsPir 1.3.6.1.4.1.231.7.1.2.1.4.3.5.14
look at meterProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100000  

sheMeterControlProfileDsPbs 1.3.6.1.4.1.231.7.1.2.1.4.3.5.15
look at meterProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 96..15000  

sheMeterControlProfileUseParameters 1.3.6.1.4.1.231.7.1.2.1.4.3.5.18
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheMeterProfileUseParametersType  

sheMeteringNotifications 1.3.6.1.4.1.231.7.1.2.1.4.3.6
OBJECT IDENTIFIER    

sheMeteringProfileCreated 1.3.6.1.4.1.231.7.1.2.1.4.3.6.1
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMeteringProfileModified 1.3.6.1.4.1.231.7.1.2.1.4.3.6.2
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMeteringProfileDeleted 1.3.6.1.4.1.231.7.1.2.1.4.3.6.3
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheRuleAndMeteringConformance 1.3.6.1.4.1.231.7.1.2.1.4.3.100
OBJECT IDENTIFIER    

sheUserFlowAndMeteringCompliances 1.3.6.1.4.1.231.7.1.2.1.4.3.100.1
OBJECT IDENTIFIER    

sheUserFlowAndMeteringCompliance 1.3.6.1.4.1.231.7.1.2.1.4.3.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheUserFlowAndMeteringGroups 1.3.6.1.4.1.231.7.1.2.1.4.3.100.2
OBJECT IDENTIFIER    

sheRuleGroup 1.3.6.1.4.1.231.7.1.2.1.4.3.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheMeteringGroup 1.3.6.1.4.1.231.7.1.2.1.4.3.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheRuleControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.3.100.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheMeteringControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.3.100.2.4
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheRuleAndMeteringNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.3.100.2.5
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheFdb 1.3.6.1.4.1.231.7.1.2.1.4.4
OBJECT IDENTIFIER    

sheFdbBase 1.3.6.1.4.1.231.7.1.2.1.4.4.1
OBJECT IDENTIFIER    

sheFdbBaseAgeingTime 1.3.6.1.4.1.231.7.1.2.1.4.4.1.1
The general ageing time for learned Mac-addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100000  


sheFdbTable 1.3.6.1.4.1.231.7.1.2.1.4.4.2
The forwarding data base table. New with R2.8 maintenance: This release introduces a new ControlRequest command for refresh of this table. Without calling this command, the table content will be static and not longer automatically updated. The refresh command could be used together with the vlanIndex, which is the first table index here. If a valid vlanIndex value was used, only the tableEntries with this vlanIndex as first key will be refreshed. If the vlanIndex is 0 or unknown the full table will be refreshed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheFdbEntry

sheFdbEntry 1.3.6.1.4.1.231.7.1.2.1.4.4.2.1
One entry per learned mac-address per vlan. First key is the VlanIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheFdbEntry  

sheFdbIndex 1.3.6.1.4.1.231.7.1.2.1.4.4.2.1.1
Second key for fdb-table. Number of valid entrys is equal to number of current learned Mac-Addresses for vlan indeced by key 1.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheFdbMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.4.2.1.2
The learned mac-address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheFdbPort 1.3.6.1.4.1.231.7.1.2.1.4.4.2.1.3
That is the sheBridgePortIndex of the destination port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sheFdbAge 1.3.6.1.4.1.231.7.1.2.1.4.4.2.1.4
Time this mac-address was learned.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheFdbStatus 1.3.6.1.4.1.231.7.1.2.1.4.4.2.1.5
The status of this entry. The meanings of the values are: other(1) : none of the following. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value was learned, and is being used. self(4) : the value of the corresponding instance of FdbAclAddress represents one of the bridge's addresses. mgmt(5) : static(6) : the value was not learned but fixed configured by operator
Status: current Access: read-only
OBJECT-TYPE    
  SheFdbStatusType  

sheFdbCpuPermit 1.3.6.1.4.1.231.7.1.2.1.4.4.2.1.6
Frames have the permission to be send to control plane.
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheFdbPortPermit 1.3.6.1.4.1.231.7.1.2.1.4.4.2.1.7
Frames have the permission to be send to data plane.
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheFdbControl 1.3.6.1.4.1.231.7.1.2.1.4.4.3
OBJECT IDENTIFIER    

sheFdbControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.4.3.1
setFdbBaseAgeingTime (401): sheFdbControlBaseAgeingTime setFdbBaseLearningUplink (402): sheFdbControlBaseLearningUplink New with R2.8 maintenance: refreshFdbTable (403): sheFdbControlIndex -> define the vlan for which the Fdb should be updated, Only supported by hiX5608 R1.3!! createFdbStaticEntry(404): sheFdbControlIndex -> define the vlan for which the FdbEntry should be created sheFdbControlPort -> define the bridgePort-Index for which the FdbEntry should be created sheFdbControlMacAddress -> define the used MacAddress
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheFdbControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.4.3.2
Value depends on the used ControlRequest.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheFdbControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.4.3.3
The status of a user command. .
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheFdbControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.4.3.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheFdbControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.4.3.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheFdbControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.4.3.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheFdbControlBaseAgeingTime 1.3.6.1.4.1.231.7.1.2.1.4.4.3.7
The values to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100000  


sheFdbControlPort 1.3.6.1.4.1.231.7.1.2.1.4.4.3.9
Define the bridgePort-Index for which the FdbEntry should be created/deleted. Value depends on the used ControlRequest. 0 used as wildcard for 'ALL' NOTE: No support by BFR2.0 of R2.8 56xx!! Only supported by 5608 R1.3!!
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..65535  

sheFdbControlMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.4.3.10
Define the MacAddress for configuration or delete. Value depends on the used ControlRequest. NOTE: No support by BFR2.0 of R2.8 56xx!! Only supported by 5608 R1.3!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheFdbNotifications 1.3.6.1.4.1.231.7.1.2.1.4.4.4
OBJECT IDENTIFIER    

sheFdbBaseAgeingTimeChanged 1.3.6.1.4.1.231.7.1.2.1.4.4.4.1
Configuration Notification
Status: current Access: read-write
NOTIFICATION-TYPE    

sheFdbBaseLearningUplinkChanged 1.3.6.1.4.1.231.7.1.2.1.4.4.4.2
Configuration Notification
Status: current Access: read-write
NOTIFICATION-TYPE    

sheFdbTableUpdated 1.3.6.1.4.1.231.7.1.2.1.4.4.4.3
FDB table update finished.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheFdbStaticMacCreated 1.3.6.1.4.1.231.7.1.2.1.4.4.4.4
static FDB table entry created
Status: current Access: read-write
NOTIFICATION-TYPE    

sheFdbConformance 1.3.6.1.4.1.231.7.1.2.1.4.4.100
OBJECT IDENTIFIER    

sheFdbCompliances 1.3.6.1.4.1.231.7.1.2.1.4.4.100.1
OBJECT IDENTIFIER    

sheFdbCompliance 1.3.6.1.4.1.231.7.1.2.1.4.4.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheFdbGroups 1.3.6.1.4.1.231.7.1.2.1.4.4.100.2
OBJECT IDENTIFIER    

sheFdbBaseGroup 1.3.6.1.4.1.231.7.1.2.1.4.4.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheFdbGroup 1.3.6.1.4.1.231.7.1.2.1.4.4.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheFdbControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.4.100.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheFdbNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.4.100.2.4
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheLag 1.3.6.1.4.1.231.7.1.2.1.4.5
OBJECT IDENTIFIER    

sheLagGroupTable 1.3.6.1.4.1.231.7.1.2.1.4.5.1
Contain allways two entrys for possible available Lag-Groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheLagGroupEntry

sheLagGroupEntry 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1
One entry for each possible lag-group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheLagGroupEntry  

sheLagGroupMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.1
A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheLagGroupActorSystemPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.2
A 2-octet value indicating the priority value associated with the Actor's System ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheLagGroupActorSystemId 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.3
A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheLagGroupAggregateOrIndividual 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.4
A read-only Boolean value indicating whether the Aggregator represents an Aggregate ('TRUE') or an Individual link ('FALSE').
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheLagGroupActorAdminKey 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.5
The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. The meaning of particular Key values is of local significance.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

sheLagGroupActorOperKey 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.6
The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-only value. The meaning of particular Key values is of local significance.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheLagGroupPartnerSystemId 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.7
A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheLagGroupPartnerSystemPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.8
A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sheLagGroupPartnerOperKey 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.9
The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit, read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local System.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheLagGroupCollectorMaxDelay 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.10
The value of this 16-bit attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser and either delivering the frame to its MAC Client or discarding the frame (see 43.2.3.1.1). Note: R2.8 will not longer accept any modification of this parameter and use always NE internal value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheLagGroupLacpActivity 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.11
This attribute will enable or disable LACP-Activity for this Lag-Group.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheLagGroupMethod 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.12
Possible values: srcmac(1), dstmac(2), xormac(3), srcip(4), dstip(5), xorip(6)
Status: current Access: read-only
OBJECT-TYPE    
  SheLagMethodType  

sheLagGroupPortList 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.13
Portlist for all member's of this LAG. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..65535)  

sheLagGroupEntPhysicalIndex 1.3.6.1.4.1.231.7.1.2.1.4.5.1.1.14
This attribute describes the entPhysicalIndex of the card, where this LAG group is placed. Only LagPorts with identical entPhysicalIndex for the card could be added to a group. This information is given via: sheLagGroupPortList -> sheLagPortEntry -> sheBridgePortIndex -> sheSublayerIndex -> ifIndex -> shePhysPortEntPhysicalIndex
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

sheLagPortTable 1.3.6.1.4.1.231.7.1.2.1.4.5.2
A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port. For she, this table will contain allways 4 entrys.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheLagPortEntry

sheLagPortEntry 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1
A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheLagPortEntry  

sheLagPortActorSystemPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.1
A 2-octet value used to define the priority value associated with the Actor's System ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheLagPortActorSystemId 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.2
A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheLagPortActorAdminKey 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.3
The current administrative value of the Key for the Aggregation Port. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheLagPortActorOperKey 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.4
The current operational value of the Key for the Aggregation Port. This is a 16-bit, read-only value. The meaning of particular Key values is of local significance.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheLagPortPartnerAdminSystemPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.5
A 2-octet value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of PortPartnerAdminSystemID, PortPartnerAdminKey, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheLagPortPartnerOperSystemPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.6
A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in PortPartnerAdminSystemPriority if there is no protocol Partner.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheLagPortPartnerAdminSystemId 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.7
A 6-octet MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminKey, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheLagPortPartnerOperSystemId 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.8
A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminSystemID if there is no protocol Partner.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheLagPortPartnerAdminKey 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.9
The current administrative value of the Key for the protocol Partner. This is a 16-bit, read-write value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminSystemID, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheLagPortPartnerOperKey 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.10
The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminKey if there is no protocol Partner. This is a 16-bit, read-only value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheLagPortSelectedAggId 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.11
The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheLagPortAttachedAggId 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.12
The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheLagPortActorPort 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.13
The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheLagPortActorPortPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.14
The priority value assigned to this Aggregation Port. This is a 2-octet value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheLagPortPartnerAdminPort 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.15
The current administrative value of the port number for the protocol Partner. This is a 16-bit value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority,PortPartnerAdminSystemID, PartnerAdminKey, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheLagPortPartnerOperPort 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.16
The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheLagPortPartnerAdminPortPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.17
The current administrative value of the port priority for the protocol Partner. This is a 16-bit value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminSystemID, PortPartnerAdminKey, and PortPartnerAdminPort, in order to achieve manually configured aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheLagPortPartnerOperPortPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.18
The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminPortPriority if there is no.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheLagPortActorAdminState 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.19
A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit of string corresponds to bit 7 (Expired). If TRUE (encoded as a 1), this flag indicates that the Actor's receive machine is in the EXPIRED state The second of string bit corresponds to bit 6 (Defaulted). If TRUE (encoded as a 1), this flag indicates that the Actor's receive machine is using Defaulted operational Partner information, administratively configured for the Partner. The third of string bit corresponds to bit 5 (Distributing). FALSE (encoded as a 0) means distribution of outgoing frames on this link is definitely disabled. The fourth of string bit corresponds to bit 4(Collecting). TRUE (encoded as a 1) means collection of incoming frames on this link is definitely enabled. The fifth of string bit corresponds to bit 3 (Synchronization). If FALSE (encoded as a 0), then this link is currently OUT_OF_SYNC, i.e., it is not in the right Aggregation. The sixth of string bit corresponds to bit 2 (Aggregation). If FALSE (encoded as a 0), the link is considered to be Individual, i.e., this link can be operated only as an individual link. The seventh of string bit corresponds to bit 1 (LACP_Timeout). Short Timeout is encoded as a 1; Long Timeout is encoded as a 0. The eighth of string bit corresponds to bit 0 of Actor_State (LACP_Activity). Active LACP is encoded as a 1; Passive LACP is encoded as a 0. The values of LACP_Activity,LACP_Timeout and Aggregation allow administrative control and could be set by controlgroup.
Status: current Access: read-only
OBJECT-TYPE    
  SheLagStateType  

sheLagPortActorOperState 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.20
A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs.
Status: current Access: read-only
OBJECT-TYPE    
  SheLagStateType  

sheLagPortPartnerAdminState 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.21
A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The assigned value is used in order to achieve manually configured aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  SheLagStateType  

sheLagPortPartnerOperState 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.22
A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. In the absence of an active protocol Partner, this value may reflect the manually configured value PortPartnerAdminState. This attribute value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  SheLagStateType  

sheLagPortAggregateOrIndividual 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.23
A read-only Boolean value indicating whether the Aggregation Port is able to Aggregate ('TRUE') or is only able to operate as an Individual link ('FALSE').
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheLagPortLacpAvailability 1.3.6.1.4.1.231.7.1.2.1.4.5.2.1.24
This attribute indicates, if this port is available for lacp or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheLagControl 1.3.6.1.4.1.231.7.1.2.1.4.5.3
OBJECT IDENTIFIER    

sheLagControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.5.3.1
modifyLagGroupEntry: sheLagControlIndex sheLagControlGroupActorSystemPriority sheLagControlGroupActorAdminKey sheLagControlGroupCollectorMaxDelay sheLagControlGroupLacpActivity sheLagControlGroupMethod modifyLagPortEntry: sheLagControlIndex sheLagControlPortActorAdminKey sheLagControlPortActorPortPriority sheLagControlPortActorAdminState sheLagControlPortLacpAvailability assignBridgePortToLag: sheLagControlIndex sheLagControlGroupPortList unassignBridgePortFromLag: sheLagControlIndex sheLagControlGroupPortList
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheLagControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.5.3.2
The index of the table entry to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheLagControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.5.3.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheLagControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.5.3.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheLagControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.5.3.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheLagControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.5.3.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheLagControlGroupActorSystemPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.3.7
Look at group-table description...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sheLagControlGroupActorAdminKey 1.3.6.1.4.1.231.7.1.2.1.4.5.3.8
Look at group-table description...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..15  

sheLagControlGroupCollectorMaxDelay 1.3.6.1.4.1.231.7.1.2.1.4.5.3.9
Look at group-table description... Note: R2.8 will not longer use any modification of this parameter and use always NE internal value. A modification will be ignored.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sheLagControlGroupPortList 1.3.6.1.4.1.231.7.1.2.1.4.5.3.10
Look at group-table description...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..65535)  

sheLagControlGroupLacpActivity 1.3.6.1.4.1.231.7.1.2.1.4.5.3.11
Look at group-table description...
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheLagControlGroupMethod 1.3.6.1.4.1.231.7.1.2.1.4.5.3.12
Look at group-table description...
Status: current Access: read-write
OBJECT-TYPE    
  SheLagMethodType  

sheLagControlPortActorAdminKey 1.3.6.1.4.1.231.7.1.2.1.4.5.3.13
Look at port-table description...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheLagControlPortActorPortPriority 1.3.6.1.4.1.231.7.1.2.1.4.5.3.14
Look at port-table description...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sheLagControlPortActorAdminState 1.3.6.1.4.1.231.7.1.2.1.4.5.3.15
Look at port-table description...Only bit 0, 1 and 2 could be configured.
Status: current Access: read-write
OBJECT-TYPE    
  SheLagStateType  

sheLagControlPortLacpAvailability 1.3.6.1.4.1.231.7.1.2.1.4.5.3.16
Look at port-table description...
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheLagNotifications 1.3.6.1.4.1.231.7.1.2.1.4.5.4
OBJECT IDENTIFIER    

sheLagGroupEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.5.4.1
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheLagPortEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.5.4.2
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheLagBridgePortAssigned 1.3.6.1.4.1.231.7.1.2.1.4.5.4.3
LagGroup-Portlist changed notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheLagBridgePortUnassigned 1.3.6.1.4.1.231.7.1.2.1.4.5.4.4
LagGroup-Portlist changed notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheLagConformance 1.3.6.1.4.1.231.7.1.2.1.4.5.100
OBJECT IDENTIFIER    

sheLagCompliances 1.3.6.1.4.1.231.7.1.2.1.4.5.100.1
OBJECT IDENTIFIER    

sheLagCompliance 1.3.6.1.4.1.231.7.1.2.1.4.5.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheLagGroups 1.3.6.1.4.1.231.7.1.2.1.4.5.100.2
OBJECT IDENTIFIER    

sheLagGroup 1.3.6.1.4.1.231.7.1.2.1.4.5.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheLagPortGroup 1.3.6.1.4.1.231.7.1.2.1.4.5.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheLagControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.5.100.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheLagNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.5.100.2.4
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheDhcpRelay 1.3.6.1.4.1.231.7.1.2.1.4.6
OBJECT IDENTIFIER    

sheDhcpBase 1.3.6.1.4.1.231.7.1.2.1.4.6.1
OBJECT IDENTIFIER    

sheDhcpRelayAdminState 1.3.6.1.4.1.231.7.1.2.1.4.6.1.1
Globaly enable/disable of Dhcp/PPPoE agent. Telegram handling for DHCP and PPPoE relay: valid telegrams are handled, invalid telegrams are dropped snoop: valid telegrams are forwarded, invalid telegrams are dropped bridge: valid telegrams are forwarded, invalid telegrams are forwarded (currently NO support) handling explanation: dhcpPppoeRelayRelay -> dhcp and Pppoe use mode relay dhcpPppoeRelaySnoop -> dhcp use mode relay and Pppoe use mode snoop valid values: up(1), -> releases >= R2.5 run now dhcpPppoeRelayRelay mode down(2), -> releases >= R2.5 run now dhcpPppoeSnoopSnoop mode dhcpPppoeRelayRelay(4), dhcpPppoeRelaySnoop(5), dhcpPppoeRelayBridge(6), (currently NO support) dhcpPppoeSnoopRelay(7), dhcpPppoeSnoopSnoop(8), dhcpPppoeSnoopBridge(9), (currently NO support) dhcpPppoeBridgeRelay(10),(currently NO support) dhcpPppoeBridgeSnoop(11),(currently NO support) dhcpPppoeBridgeBridge(12)(currently NO support) NOTE: Only release R2.5 and higher can accept new value's 4..12 depending on the state of implementation in NE.
Status: current Access: read-only
OBJECT-TYPE    
  SheDhcpRelayAdminStateType  

sheDhcpRelayRemoteId 1.3.6.1.4.1.231.7.1.2.1.4.6.1.2
Per default it is the Mac-Address of the DSLAM (length is 6) to be identified for Option 82. Could be set by operator. Moved to sheBridgePortTable and sheBridgeBase. (obsolete)
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6..64)  

sheDhcpUseInnerTagForProtocols 1.3.6.1.4.1.231.7.1.2.1.4.6.1.3
This configuration is only valid in double tagged mode. If enabled (true), the protocol machines for all DHCP providers will use the informations from inner tag of a received frame for evaluation, handling and forwarding. Per default always the outer tag will used. New with SHE R.8.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

shePppoeUseInnerTagForProtocols 1.3.6.1.4.1.231.7.1.2.1.4.6.1.4
This configuration is only valid in double tagged mode. If enabled (true), the protocol machines for all PPPoE providers will use the informations from inner tag of a received frame for evaluation, handling and forwarding. Per default always the outer tag will used. New with SHE R.8.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheDhcpStationMoveEnabled 1.3.6.1.4.1.231.7.1.2.1.4.6.1.8
This parameter configure the feature 'station move' for service issues. If enabled, the NE will instantly release all DHCP session informations and possibly learned mac addresses for a certain subscriber line if a 'link down' event for this line was detected. If disabled, all release actions will be done according to FDB aging time and DHCP lease time configuration. New with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheDhcpProviderTable 1.3.6.1.4.1.231.7.1.2.1.4.6.2
The dhcp/pppoe provider table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheDhcpProviderEntry

sheDhcpProviderEntry 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1
One entry for each known dhcp or pppoe provider (depends on the option settings).
Status: current Access: not-accessible
OBJECT-TYPE    
  SheDhcpProviderEntry  

sheDhcpProviderIndex 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.1
A table index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..64  

sheDhcpProviderName 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.2
Descriptional name. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheDhcpServerIpAddress1 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.3
There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpServerIpAddress2 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.4
There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpServerIpAddress3 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.5
There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpServerGateway 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.6
The gateway address of this dhcp provider. Not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpVlanId 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.7
That points to the VLAN, where the request should be send. A configuration is only in case of simplified DHCP agent possible. For PPPoE and normal DHCP providers the value of sheDhcpVlanId should be 0. That means, no provider vlan for received request's will be used! Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheDhcpRelayAgentIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.8
The relay agent IP address is used to set the GIADDR in DHCP messages. With R2.6, it can either be configured to an address that denotes a subscriber's subnet. If not set, the NE will automatically set to the IP of the interface which is used for sending DHCP message to DHCP server. In all cases, a configuration is not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpRelayAgentNetmask 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.9
The RelayAgent Netmask. Not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. Note: This parameter is not longer valid starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpRelayAgentOption 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.10
Option 82, depends on the Dhcp - Server functionality. If PPPoE is configured also special Options could be implemented. With R2.7 additional options for LineProperty are possible (value 12..23).
Status: current Access: read-only
OBJECT-TYPE    
  SheDhcpRelayAgentOptionType  

sheDhcpCebsMacTranslation 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.11
Configuration whether CHADDR in a DHCP packet should be changed or not in CEBS environment. Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheDhcpRelayAgentMgmt 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.12
Configuration whether a dhcp provider should be used for mgmt-port relay or not. There can be only one dhcp-provider for mgmt-relay.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheDhcpInnerVlanId 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.13
The index of inner-vlan when to forward Requests to the uplink. This vlan tag is used for the inner tag on double tagging mode. A configuration is only in case of simplified DHCP agent possible. For PPPoE and normal DHCP providers the value of sheDhcpVlanId should be 0. That means, no provider vlan for received request's will be used! Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheDhcpBcastTranslationDs 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.14
Configuration whether destination address in a DHCP downstream packet should be changed or not. True - use always unicast address False - check broadcast flag from server and use unicast or broadcast address accordingly Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheDhcpLinePropertyNodeIdentifier 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.16
This parameter defines the name of the access node the DSLAM uses to identifies itself by the provider. New with R2.7.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

sheDhcpServerIpAddress4 1.3.6.1.4.1.231.7.1.2.1.4.6.2.1.17
Now there are four entrys and all of them backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. New with R2.8 maintenance.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpControl 1.3.6.1.4.1.231.7.1.2.1.4.6.3
OBJECT IDENTIFIER    

sheDhcpControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.6.3.1
setDhcpAdminState: sheDhcpControlRelayAdminState Depending on the used RelayAgentOption value, not all values are needed. If a PPPoE or simplified option is used, only the values Name and AgentOption are mandatory. createDhcpProviderEntry: sheDhcpControlProfileName sheDhcpControlServerIpAddress1 sheDhcpControlServerIpAddress2 sheDhcpControlServerIpAddress3 sheDhcpControlServerGateway(obsolete) sheDhcpControlVlanId sheDhcpControlRelayAgentOption sheDhcpControlRelayAgentNetmask(obsolete) sheDhcpControlRelayAgentIpAddress sheDhcpControlCebsMacTranslation sheDhcpControlRelayAgentMgmt sheDhcpControlInnerVlanId sheDhcpControlBcastTranslationDs sheDhcpControlLinePropertyNodeIdentifier (new with R2.7) sheDhcpControlServerIpAddress4 (new with R2.8 maintenance) modifyDhcpProviderEntry: sheDhcpControlIndex sheDhcpControlServerIpAddress1 sheDhcpControlServerIpAddress2 sheDhcpControlServerIpAddress3 sheDhcpControlServerGateway(obsolete) sheDhcpControlVlanId sheDhcpControlRelayAgentNetmask(obsolete) sheDhcpControlRelayAgentIpAddress sheDhcpControlRelayAgentOption sheDhcpControlCebsMacTranslation sheDhcpControlRelayAgentMgmt sheDhcpControlInnerVlanId sheDhcpControlBcastTranslationDs sheDhcpControlLinePropertyNodeIdentifier (new with R2.7) sheDhcpControlServerIpAddress4 (new with R2.8 maintenance) deleteDhcpProviderEntry: sheDhcpControlIndex New with R2.8: setDhcpTagForProtocol: sheDhcpControlUseInnerTagForProtocols setDhcpStationMove: sheDhcpControlStationMoveEnabled
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheDhcpControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.6.3.2
The table index to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..64  

sheDhcpControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.6.3.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheDhcpControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.6.3.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheDhcpControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.6.3.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheDhcpControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.6.3.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheDhcpControlRelayAdminState 1.3.6.1.4.1.231.7.1.2.1.4.6.3.7
Look at base parameter description...
Status: current Access: read-write
OBJECT-TYPE    
  SheDhcpRelayAdminStateType  

sheDhcpControlRelayRemoteId 1.3.6.1.4.1.231.7.1.2.1.4.6.3.8
Per default it is the Mac-Address of the DSLAM (length is 6) to be identified for Option 82. Could be set by operator. (obsoleted in V135)
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6..64)  

sheDhcpControlProviderName 1.3.6.1.4.1.231.7.1.2.1.4.6.3.9
Look at table description... Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheDhcpControlServerIpAddress1 1.3.6.1.4.1.231.7.1.2.1.4.6.3.10
Look at table description...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpControlServerIpAddress2 1.3.6.1.4.1.231.7.1.2.1.4.6.3.11
Look at table description...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpControlServerIpAddress3 1.3.6.1.4.1.231.7.1.2.1.4.6.3.12
Look at table description...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpControlServerGateway 1.3.6.1.4.1.231.7.1.2.1.4.6.3.13
Look at table description... Note: A configuration of this parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpControlVlanId 1.3.6.1.4.1.231.7.1.2.1.4.6.3.14
Look at table description... Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheDhcpControlRelayAgentIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.6.3.15
The relay agent IP address is used to set the GIADDR in DHCP messages. With R2.6, it can either be configured to an address that denotes a subscriber's subnet. If not set, the NE will automatically set to the IP of the interface which is used for sending DHCP message to DHCP server. In all cases, a configuration is not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpControlRelayAgentNetmask 1.3.6.1.4.1.231.7.1.2.1.4.6.3.16
The RelayAgent Netmask. Note: A configuration of this parameter is not longer supported starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpControlRelayAgentOption 1.3.6.1.4.1.231.7.1.2.1.4.6.3.17
Look at table description... With R2.7 additional options for LineProperty are possible (value 12..23).
Status: current Access: read-write
OBJECT-TYPE    
  SheDhcpRelayAgentOptionType  

sheDhcpControlCebsMacTranslation 1.3.6.1.4.1.231.7.1.2.1.4.6.3.18
configuration whether CHADDR in a DHCP packet should be changed or not in CEBS environment. Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheDhcpControlRelayAgentMgmt 1.3.6.1.4.1.231.7.1.2.1.4.6.3.19
Configuration whether a dhcp provider should be used for mgmt-port relay or not. There can be only one dhcp-provider for mgmt-relay.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheDhcpControlInnerVlanId 1.3.6.1.4.1.231.7.1.2.1.4.6.3.20
The index of inner-vlan when to forward Dhcp Requests to the uplink. This vlan tag is used for the inner tag on double tagging mode. Only valid for simplified DHCP agent configuration. Look at table description. Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheDhcpControlBcastTranslationDs 1.3.6.1.4.1.231.7.1.2.1.4.6.3.21
Configuration whether destination address in a DHCP downstream packet should be changed or not. True - use always unicast address False - check broadcast flag from server and use unicast or broadcast address accordingly Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheDhcpControlUseInnerTagForProtocols 1.3.6.1.4.1.231.7.1.2.1.4.6.3.22
Used for configuration of global DHCP and PPPoE useTag settings. BITS { dhcpUseInnerTagTrue(0), pppoeUseInnerTagTrue(1) } If bit is set to 1 the corresponding global parameter is set to true. Support with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheDhcpUseTagForProtocolsType  

sheDhcpControlLinePropertyNodeIdentifier 1.3.6.1.4.1.231.7.1.2.1.4.6.3.23
This parameter defines the name of the access node the DSLAM uses to identifies itself by the provider. New with R2.7.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

sheDhcpControlStationMoveEnabled 1.3.6.1.4.1.231.7.1.2.1.4.6.3.25
This parameter configure the feature 'station move' for service issues. If enabled, the NE will instantly release all DHCP session informations and possibly learned mac addresses for a certain subscriber line if a 'link down' event for this line was detected. If disabled, all release actions will be done according to FDB aging time and DHCP lease time configuration. New with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheDhcpControlServerIpAddress4 1.3.6.1.4.1.231.7.1.2.1.4.6.3.26
Look at table description...
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheDhcpNotifications 1.3.6.1.4.1.231.7.1.2.1.4.6.5
OBJECT IDENTIFIER    

sheDhcpProviderEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.6.5.1
A new dhcp provider table entry was created.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpProviderEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.6.5.2
A dhcp provider table entry was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpProviderEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.6.5.3
A dhcp provider table entry was deleted.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpRelayAdminStateModified 1.3.6.1.4.1.231.7.1.2.1.4.6.5.4
The dhcp relay admin state was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpRelayOptionModified 1.3.6.1.4.1.231.7.1.2.1.4.6.5.5
The dhcp relay option was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpRelayRemoteIdModified 1.3.6.1.4.1.231.7.1.2.1.4.6.5.6
The dhcp relay remote id was modified.
Status: obsolete Access: read-write
NOTIFICATION-TYPE    

sheDhcpFloodVlanIdAdded 1.3.6.1.4.1.231.7.1.2.1.4.6.5.7
The dhcp flood vlanid was added. It becomes obsolete.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpFloodVlanIdDeleted 1.3.6.1.4.1.231.7.1.2.1.4.6.5.8
The dhcp flood vlanid was deleted. It becomes obsolete.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpFloodVlanIdModified 1.3.6.1.4.1.231.7.1.2.1.4.6.5.9
The dhcp flood vlanid was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpTagForProtocolsModified 1.3.6.1.4.1.231.7.1.2.1.4.6.5.10
The dhcp and pppoe global useTag options were modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpStationMoveEnableModified 1.3.6.1.4.1.231.7.1.2.1.4.6.5.11
The dhcp station move enable switch was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheDhcpFloodVlanIdTable 1.3.6.1.4.1.231.7.1.2.1.4.6.7
The dhcp flood vlanid table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheDhcpFloodVlanIdEntry

sheDhcpFloodVlanIdEntry 1.3.6.1.4.1.231.7.1.2.1.4.6.7.1
One entry for each dhcp flood vlanid.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheDhcpFloodVlanIdEntry  

sheDhcpFloodVlanId 1.3.6.1.4.1.231.7.1.2.1.4.6.7.1.1
Index of that table. Will be identical to the used sheVlanIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheDhcpFloodVlanEnabled 1.3.6.1.4.1.231.7.1.2.1.4.6.7.1.2
Enable or disable a flooding vlan for DHCP packets. The default is false. New with R2.8: Flooding of DHCP or PPPoE packets could now be separatly enabled. The former command switch always both protocol types.
Status: current Access: read-only
OBJECT-TYPE    
  SheDhcpFloodingType  

sheDhcpFloodVlanIdControl 1.3.6.1.4.1.231.7.1.2.1.4.6.8
OBJECT IDENTIFIER    

sheDhcpFloodVlanIdControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.6.8.1
setDhcpFloodVlanId: sheDhcpFloodVlanIdControlVlanId sheDhcpFloodVlanIdControlVlanEnabled
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheDhcpFloodVlanIdControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.6.8.2
The status of a control request
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheDhcpFloodVlanIdControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.6.8.3
The maximum wait time for the manager for a long running user command. The manager reads this value from the SHE.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheDhcpFloodVlanIdControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.6.8.4
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheDhcpFloodVlanIdControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.6.8.5
The time stamp of the last command (end of command)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheDhcpFloodVlanIdControlVlanId 1.3.6.1.4.1.231.7.1.2.1.4.6.8.6
VLAN ID which is controlled for Dhcp flooding
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheDhcpFloodVlanIdControlVlanEnabled 1.3.6.1.4.1.231.7.1.2.1.4.6.8.7
look at table. Expanded with R2.8 maintenance.
Status: current Access: read-write
OBJECT-TYPE    
  SheDhcpFloodingType  

sheDhcpConformance 1.3.6.1.4.1.231.7.1.2.1.4.6.100
OBJECT IDENTIFIER    

sheDhcpCompliances 1.3.6.1.4.1.231.7.1.2.1.4.6.100.1
OBJECT IDENTIFIER    

sheDhcpCompliance 1.3.6.1.4.1.231.7.1.2.1.4.6.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheDhcpRelayGroups 1.3.6.1.4.1.231.7.1.2.1.4.6.100.2
OBJECT IDENTIFIER    

sheDhcpBaseGroup 1.3.6.1.4.1.231.7.1.2.1.4.6.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheDhcpProviderGroup 1.3.6.1.4.1.231.7.1.2.1.4.6.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheDhcpControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.6.100.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheDhcpNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.6.100.2.4
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheDhcpFloodVlanIdGroup 1.3.6.1.4.1.231.7.1.2.1.4.6.100.2.5
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheDhcpFloodVlanIdControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.6.100.2.6
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheDhcpObsoleteGroup 1.3.6.1.4.1.231.7.1.2.1.4.6.100.2.7
Description.
Status: obsolete Access: read-write
OBJECT-GROUP    

sheDhcpObsoleteNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.6.100.2.8
Description.
Status: obsolete Access: read-write
NOTIFICATION-GROUP    

sheIgmp 1.3.6.1.4.1.231.7.1.2.1.4.7
OBJECT IDENTIFIER    

sheIgmpBase 1.3.6.1.4.1.231.7.1.2.1.4.7.2
OBJECT IDENTIFIER    

sheIgmpMode 1.3.6.1.4.1.231.7.1.2.1.4.7.2.2
IGMP operation mode can be off proxy That is the general NE igmp on/off switch.
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpModeType  

sheIgmpVersion 1.3.6.1.4.1.231.7.1.2.1.4.7.2.3
The version of IGMP which is running on this interface (detected by the NE). The NE uses version 2 as default. If version 1 members are detected on the IP subnet attached to this interface, the NE falls back to version 1. Note: This parameter is not longer supported starting with release SHE R2.8 The used version should be configured per IGMP profileVlan entry.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

sheIgmpMaxJoinedSubscriber 1.3.6.1.4.1.231.7.1.2.1.4.7.2.4
The maximum number of subscribers who can join a multicast group in the system. Note: This parameter is not longer supported starting with release SHE R2.6.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheIgmpMaxJoinedGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.2.5
The maximum number of multicast groups that could be joined in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1000  

sheIgmpVlanTranslationMode 1.3.6.1.4.1.231.7.1.2.1.4.7.2.6
Configure VLAN translation mode for the system. 1 is inner tagged, 2 is outer tagged, default configuration is inner. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpVlanMode  

sheIgmpVlanDoubleTaggingMode 1.3.6.1.4.1.231.7.1.2.1.4.7.2.7
Configure provider VLAN tagging mode for the system, 1 is inner, 2 is outer, default configuration is outer. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpVlanMode  

sheIgmpDoubleTaggingControl 1.3.6.1.4.1.231.7.1.2.1.4.7.2.9
OBJECT IDENTIFIER    

sheIgmpDoubleTaggingControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.2.9.1
New with SHE R.8. setIgmpTagMode: sheIgmpControlVlanTranslationMode sheIgmpControlVlanDoubleTaggingMode
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheIgmpDoubleTaggingControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.2.9.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheIgmpDoubleTaggingControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.7.2.9.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpDoubleTaggingControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.2.9.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheIgmpDoubleTaggingControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.7.2.9.5
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpControlVlanTranslationMode 1.3.6.1.4.1.231.7.1.2.1.4.7.2.9.6
Configure VLAN translation mode for the system, 1 is inner tagged, 2 is outer tagged, default configuration is inner. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpVlanMode  

sheIgmpControlVlanDoubleTaggingMode 1.3.6.1.4.1.231.7.1.2.1.4.7.2.9.7
Configure provider VLAN tagging mode for the system, 1 is inner, 2 is outer, default configuration is outer. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpVlanMode  

sheIgmpProfileTable 1.3.6.1.4.1.231.7.1.2.1.4.7.5
The table has one provider entry. It contains the provider VLAN and the host and querier settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpProfileEntry

sheIgmpProfileEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1
In first release we will only support one table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpProfileEntry  

sheIgmpProviderIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.1
A table Index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..16  

sheIgmpProviderProfileName 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.2
Name for easy profile handling. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sheIgmpProviderProxyIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.3
The source IP address used by the IGMP proxy for join and leave messages in upstream direction and for queries in downstream direction.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheIgmpProviderRobustness 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.4
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. The Robustness Variable MUST NOT be zero, and SHOULD NOT be one.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

sheIgmpProviderQueryInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.5
The frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 10..250  

sheIgmpProviderQueryResponseInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.6
The Max Response Time inserted into the periodic General Queries. When the subscriber host doesn't respond to IGMP query messages, it is unsubscribed from the multicast group. It must be less than the Query Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

sheIgmpProviderStartupQueryInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.7
The startup frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheIgmpProviderStartupQueryCount 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.8
The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

sheIgmpProviderLastMemberQueryInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.9
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

sheIgmpProviderLastMemberQueryCount 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.10
The Last Member Query Count is the number of Group-Specific Queries sent before the router assumes there are no local members.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpProviderImmediateLeave 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.11
If immediate leave is disabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If immediate leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. Note: Not longer configurable with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheIgmpProviderUnsolicitedReportInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.12
The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group (upstream).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpProviderVersion1RouterTimeout 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.13
The Version 1 Router Present Timeout is how long a host must wait after hearing a Version 1 Query before it may send any IGMPv2 messages. The time until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is loaded to a timer. While the timer is running, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterTimeout.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpProviderVersion1RouterPresentTimeout 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.14
The time remaining until a host will assume that there are no longer any IGMP version 1 routers on the IP subnet attached to this interface. Upon hearing any Version 1 Query, this value is reset to the group membership timer. While this time remaining is non-zero, it may not send any IGMPv2 messages. The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer. While this time remaining is non-zero, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterPresentTimeout.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpProviderVlanMulticastLimitation 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.15
Configures all possible multicast addresses for IGMP on a per VLAN basis. This parameter indicates whether this IGMP provider have the limitation on the multicast group/packages or not. Value can be true(1) or false(2). False means all subscriber can join all multicast streams through to this whole VLAN if they are member of this vlan (unlimited access). True is the default state and means only configured groups/packages could be joined (limited access).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheIgmpProviderMcastBandwithLimit 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.16
This is the configured multicast bandwith limitation per provider. The value 65535 (0xFFFF) is a special value and means unlimited access for this provider (switch off feature AC - admission control - default). New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10000 | 65535  

sheIgmpProviderDefaultChannelBandwith 1.3.6.1.4.1.231.7.1.2.1.4.7.5.1.17
This parameter has a range of 0..500 representing the default channel bandwith with a granularity of 100kBits. When a non-premium channel is registered, its channel bandwidth will adopt the default bandwith. New parameter with SHE R2.8
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..500  

sheIgmpProfileControl 1.3.6.1.4.1.231.7.1.2.1.4.7.6
OBJECT IDENTIFIER    

sheIgmpProviderControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.6.1
setIgmpMode: sheIgmpProviderControlMode setIgmpMaxJoinedSubscribers: (Note: Not longer supported starting with release SHE R2.6.) sheIgmpProviderControlMaxJoinedSubscribers setIgmpMaxJoinedGroup: sheIgmpProviderControlMaxJoinedGroup createIgmpProviderEntry: sheIgmpProviderControlProfileName sheIgmpProviderControlProxyIpAddress sheIgmpProviderControlRoboustness sheIgmpProviderControlQueryInterval sheIgmpProviderControlQueryResponseInterval sheIgmpProviderControlStartupQueryInterval sheIgmpProviderControlStartupQueryCount sheIgmpProviderControlLastMemberQueryInterval sheIgmpProviderControlLastMemberQueryCount sheIgmpProviderControlImmediateLeave sheIgmpProviderControlUnsolicitedReportInterval sheIgmpProviderControlVersion1RouterTimeout sheIgmpProviderControlVlanMulticastLimitation modifyIgmpProviderEntry: sheIgmpProviderControlIndex sheIgmpProviderControlProfileName sheIgmpProviderControlProxyIpAddress sheIgmpProviderControlRoboustness sheIgmpProviderControlQueryInterval sheIgmpProviderControlQueryResponseInterval sheIgmpProviderControlStartupQueryInterval sheIgmpProviderControlStartupQueryCount sheIgmpProviderControlLastMemberQueryInterval sheIgmpProviderControlLastMemberQueryCount sheIgmpProviderControlImmediateLeave sheIgmpProviderControlUnsolicitedReportInterval sheIgmpProviderControlVersion1RouterTimeout sheIgmpProviderControlVlanMulticastLimitation deleteIgmpProviderEntry: sheIgmpProviderControlIndex New with SHE R2.8: setIgmpProviderChannelAdmission (743): sheIgmpProviderControlIndex sheIgmpProviderControlMcastBandwithLimit sheIgmpProviderControlDefaultChannelBandwith
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheIgmpProviderControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.6.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheIgmpProviderControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.7.6.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpProviderControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.6.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheIgmpProviderControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.7.6.5
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpProviderControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.6.6
index of sheIgmpProviderTable parameter for - modifyIgmpProviderEntry - deleteIgmpProviderEntry - setIgmpProviderEntrySourceList
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

sheIgmpProviderControlMode 1.3.6.1.4.1.231.7.1.2.1.4.7.6.7
IGMP operation mode can be off proxy parameter for - setIgmpMode That is the general NE igmp on/off switch.
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpModeType  

sheIgmpProviderControlProfileName 1.3.6.1.4.1.231.7.1.2.1.4.7.6.8
Name for easy profile handling. Spaces and other special characters (: o) are not allowed!! parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sheIgmpProviderControlProxyIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.7.6.9
The source IP address used by the IGMP proxy for join and leave messages in upstream direction and for queries in downstream direction. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheIgmpProviderControlRobustness 1.3.6.1.4.1.231.7.1.2.1.4.7.6.10
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. The Robustness Variable MUST NOT be zero, and SHOULD NOT be one. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

sheIgmpProviderControlQueryInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.6.11
The frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..250  

sheIgmpProviderControlQueryResponseInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.6.12
The Max Response Time inserted into the periodic General Queries. When the subscriber host doesn't respond to IGMP query messages, it is unsubscribed from the multicast group. It must be less than the Query Interval. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

sheIgmpProviderControlStartupQueryInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.6.13
The startup frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

sheIgmpProviderControlStartupQueryCount 1.3.6.1.4.1.231.7.1.2.1.4.7.6.14
The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

sheIgmpProviderControlLastMemberQueryInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.6.15
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

sheIgmpProviderControlLastMemberQueryCount 1.3.6.1.4.1.231.7.1.2.1.4.7.6.16
The Last Member Query Count is the number of Group-Specific Queries sent before the router assumes there are no local members. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheIgmpProviderControlImmediateLeave 1.3.6.1.4.1.231.7.1.2.1.4.7.6.17
If immediate leave is disabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If immediate leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry Note: Not longer configurable with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  ShePermissionType  

sheIgmpProviderControlUnsolicitedReportInterval 1.3.6.1.4.1.231.7.1.2.1.4.7.6.18
The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group (upstream). parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheIgmpProviderControlVersion1RouterTimeout 1.3.6.1.4.1.231.7.1.2.1.4.7.6.19
The Version 1 Router Present Timeout is how long a host must wait after hearing a Version 1 Query before it may send any IGMPv2 messages. The time until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is loaded to a timer. While the timer is running, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterTimeout.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheIgmpProviderControlMaxJoinedSubscriber 1.3.6.1.4.1.231.7.1.2.1.4.7.6.20
The maximum number of joined subscribers in the system. Note: This parameter is not longer supported starting with release SHE R2.6.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

sheIgmpProviderControlMaxJoinedGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.6.21
The maximum number of multicast groups that could be joined in the system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1000  

sheIgmpProviderControlVlanMulticastLimitation 1.3.6.1.4.1.231.7.1.2.1.4.7.6.22
true(1),false(2) look at table
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheIgmpProviderControlMcastBandwithLimit 1.3.6.1.4.1.231.7.1.2.1.4.7.6.23
This is the configured multicast bandwith limitation per provider. The value 655353 (0xFFFF) is a special value and means unlimited access for this provider (switch off feature AC - admission control). New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10000 | 65535  

sheIgmpProviderControlDefaultChannelBandwith 1.3.6.1.4.1.231.7.1.2.1.4.7.6.24
This parameter has a range of 0..500 representing the default channel bandwith with a granularity of 100kBits. When a non-premium channel is registered, its channel bandwidth will adopt the default bandwith. New parameter with SHE R2.8
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..500  

sheIgmpProfileVlanTable 1.3.6.1.4.1.231.7.1.2.1.4.7.7
The table assigns a VLANs for multicast traffic to multicast provider profiles. Both a Vlan and a profile can be assigned only once.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpProfileVlanEntry

sheIgmpProfileVlanEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1
A table entry assigns a VLAN for multicast traffic to a multicast provider profile. Both a Vlan and a profile can be assigned only once.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpProfileVlanEntry  

sheIgmpProfileVlanVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.2
The provider specific Vlan for multicast traffic. The sheVlanIndex for that Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheIgmpProfileVlanMcastEgressPorts 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.3
List of all fully configured subscriber ports of this multicast VLAN. The list is updated whenever any part of the chain bridgePort->MCastPackage->IgmpGroup changes. The octet string is a list of pairs of octets each identifying an sheBridgePortIndex. The least significant byte is the second octet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

sheIgmpProfileVlanInnerVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.4
An inner vlanid for this igmp provider vlan. It is used in double tagging mode when sending IGMP packets to uplink. It is useless besides double tagging mode and could be 0 in that case.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheIgmpProfileVlanDot1pPriority 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.5
The priority of an IGMP query that is inserted in vlan tag when a querier sends it to subscribers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheIgmpProfileVlanDot1pReportPriority 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.6
The priority of an IGMP report that is inserted in vlan tag when a host sends it to router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheIgmpProfileVlanDot1pInnerPriority 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.7
The inner priority of an IGMP query that is inserted in inner vlan tag when a querier sends a query to subscribers. This attribute is used only for double tagging mode.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheIgmpProfileVlanDot1pInnerReportPriority 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.8
The priority of an IGMP report that is inserted in inner vlan tag when a host sends a report to router. This attribute is used only for double tagging mode.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheIgmpProfileVlanForkingMode 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.9
IGMP forking function enabled will send the original IGMP messages with actual MAC address of the clients (e.g. STB) and the corresponding/preserved customer VLAN ID towards the BRAS/Edge Router regardless of IGMP proxy configuration/operation. Possible values: noForking(0), ipoeForking(1), pppoeForking(2)
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpProfileVlanForkingModeType  

sheIgmpProfileVlanOuterVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.10
An outer vlanid for this igmp provider vlan. It is used in double tagging mode when sending IGMP packets to uplink. It is useless besides double tagging mode and could be 0 in that case. New with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheIgmpProfileVlanVersion 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.11
Configure the supported IGMP version for that provider specific vlan. IGMP frames of wrong version should be silently discarded. New parameter with SHE R2.8
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpVersionType  

sheIgmpProfileVlanASMStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.12
Igmp provider ASM (any source multicast)status. When enabled, any source multicast is allowed for the provider, when disabled, any source multicast is not permitted for the provider. Default value is Enable. New parameter with SHE R2.8
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpProviderASM  

sheIgmpProfileVlanCxUSnoopingState 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.13
It indicates whether IGMP CXU snooping mode is enabled on provider. Value 0 is disable; value 1 is enable. Default value is disable. New parameter with SHE R2.8
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpProviderVlanCxuSnoopingState  

sheIgmpProfileVlanDefaultSourceIdList 1.3.6.1.4.1.231.7.1.2.1.4.7.7.1.14
This parameter contains a list of indeces which points to valid entries of the sheIgmpSourceIpAddressTable. Each octet represents one index value. The list could be empty (default). If the configured sheIgmpMcastChannelSourceId of related group's points to index with IP address 0.0.0.0 (wildcard configuration, ASM), any IGMP report message in network direction is sent as IGMv3 ASM report. If the defaultList contains entries pointing to other non-zero IP-addresses, those (all of them) are used to generate an IGMPv3 SSM report packet in network direction. In case of IGMP provider mode IGMPv3 or IGMPv3Compatible the default IP list is checked with channel as key for any received ASM packet to determine the transmission mode (ASM,SSM) and source address for packets sent in network direction. This configuration is not valid for IGMPv2 provider mode. This configuration here will be outvoted by a similar configuration for the related IgmpGroup. New parameter with SHE R2.8 maintenance.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..100)  

sheIgmpProfileVlanControl 1.3.6.1.4.1.231.7.1.2.1.4.7.8
OBJECT IDENTIFIER    

sheIgmpProfileVlanControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.8.1
createIgmpProfileVlanEntry: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlVlanId - sheIgmpProfileVlanControlDot1pPriority - sheIgmpProfileVlanControlDot1pReportPriority - sheIgmpProfileVlanControlDot1pInnerPriority - sheIgmpProfileVlanControlDot1pReportInnerPriority - sheIgmpProfileVlanControlInnerVlanId - sheIgmpProfileVlanControlOuterVlanId (new with R2.8) - sheIgmpProfileVlanControlVersion (new with R2.8) - sheIgmpProfileVlanControlASMStatus (new with R2.8) - sheIgmpProfileVlanControlCxuSnoopingState (new with R2.8) - sheIgmpProfileVlanControlDefaultSourceIdList (new with R2.8 maintenance) deleteIgmpProfileVlanEntry: - sheIgmpProfileVlanControlIndex modifyIgmpProfileVlanDot1p: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlDot1pPriority - sheIgmpProfileVlanControlDot1pReportPriority - sheIgmpProfileVlanControlDot1pInnerPriority - sheIgmpProfileVlanControlDot1pReportInnerPriority - sheIgmpProfileVlanControlInnerVlanId - sheIgmpProfileVlanControlOuterVlanId (new with R2.8) - sheIgmpProfileVlanControlVersion (new with R2.8) - sheIgmpProfileVlanControlASMStatus (new with R2.8) - sheIgmpProfileVlanControlCxuSnoopingState (new with R2.8) - sheIgmpProfileVlanControlDefaultSourceIdList (new with R2.8 maintenance) R2.4 only modifyIgmpProfileVlanForkingMode: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlForkingMode
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheIgmpProfileVlanControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.8.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheIgmpProfileVlanControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.7.8.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpProfileVlanControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.8.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheIgmpProfileVlanControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.7.8.5
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpProfileVlanControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.8.6
The index sheIgmpProviderIndex of the provider specific multicast profile. parameter for - createIgmpProfileVlanEntry - deleteIgmpProfileVlanEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1  

sheIgmpProfileVlanControlVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.8.7
The provider specific Vlan for multicast traffic. The sheVlanIndex for that Vlan. parameter for - deleteIgmpProfileVlanEntry
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheIgmpProfileVlanControlInnerVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.8.8
An inner vlanid for this igmp provider vlan or 0 if not used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheIgmpProfileVlanControlDot1pPriority 1.3.6.1.4.1.231.7.1.2.1.4.7.8.9
The priority of an IGMP query that is inserted in vlan tag when a querier sends it to subscribers.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheIgmpProfileVlanControlDot1pReportPriority 1.3.6.1.4.1.231.7.1.2.1.4.7.8.10
The priority of an IGMP report that is inserted in vlan tag when a host sends it to router.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheIgmpProfileVlanControlDot1pInnerPriority 1.3.6.1.4.1.231.7.1.2.1.4.7.8.11
The inner priority of an IGMP query that is inserted in inner vlan tag when a querier sends a query to subscribers. This attribute is used only for double tagging mode.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheIgmpProfileVlanControlDot1pInnerReportPriority 1.3.6.1.4.1.231.7.1.2.1.4.7.8.12
The priority of an IGMP report that is inserted in inner vlan tag when a host sends a report to router. This attribute is used only for double tagging mode.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheIgmpProfileVlanControlForkingMode 1.3.6.1.4.1.231.7.1.2.1.4.7.8.13
When it's set to 0, it means no forking, when set to 1 it means forking mode is IPoE forking, when set to 2, PPPoE forking is used for the provider
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpProfileVlanForkingModeType  

sheIgmpProfileVlanControlOuterVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.8.14
An outer vlanid for this igmp provider vlan or 0 if not used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheIgmpProviderControlVersion 1.3.6.1.4.1.231.7.1.2.1.4.7.8.15
Configure the supported IGMP version for that provider specific vlan. IGMP frames of wrong version should be silently discarded. New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpVersionType  

sheIgmpProviderControlASMStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.8.16
Igmp provider ASM (any source multicast)status. When enabled, any source multicast is allowed for the provider, when disabled, any source multicast is not permitted for the provider. Default value is Enable. parameter for - createIgmpProfileVlanEntry: - modifyIgmpProfileVlanDot1p: New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpProviderASM  

sheIgmpProfileVlanControlCxUSnoopingState 1.3.6.1.4.1.231.7.1.2.1.4.7.8.17
It indicates whether IGMP CXU snooping mode is enabled on provider. Value 0 is disable; value 1 is enable. parameter for - createIgmpProfileVlanEntry: - modifyIgmpProfileVlanDot1p: New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpProviderVlanCxuSnoopingState  

sheIgmpProfileVlanControlDefaultSourceIdList 1.3.6.1.4.1.231.7.1.2.1.4.7.8.18
look at table New parameter with SHE R2.8 maintenance.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..100)  

sheIgmpGroupTable 1.3.6.1.4.1.231.7.1.2.1.4.7.9
The table contains entries for multicast groups. A group has a specific multicast address, belongs to a provider and to a multicast group package.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpGroupEntry

sheIgmpGroupEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1
One entry for each Igmp-Group. If IGMPv3 is running, each table entry represent a single channel configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpGroupEntry  

sheIgmpGroupIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.1
A table Index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1000  

sheIgmpGroupIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.2
The used Multicast IP-Address. If these Address is set to 00000000, it should work as a * wildcard configuration, it means an any group (S,*) channel.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheIgmpGroupName 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.3
A unique name for this multicast group. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheIgmpGroupProviderId 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.4
That is the index of the corresponding sheIgmpProviderTable entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..16  

sheIgmpGroupMcastGroupPackageList 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.5
That is a list of available corresponding indices of the sheIgmpMcastGroupPackageTable where this group is a member. Each index has 16 bit. The least significant byte is the second octet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..65535)  

sheIgmpGroupJoinedPortsList 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.6
List of subscribers currently subscribing this multicast group. The octet string is a list of pairs of octets each identifying an sheBridgePortIndex. The least significant byte is the second octet. A change in this list will not be reported by a trap.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..65535)  

sheIgmpGroupLastMembershipReport 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.7
Time since the last membership report has been sent upstream by the proxy for this multicast group.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpGroupLastLeaveMessage 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.8
Time since the last leave group message has been sent upstream by the proxy for this multicast group.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpGroupSuppliedCardList 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.9
List of entPhysIndices currently receiving data of this multicast group. The octet string is a list of pairs of octets each identifying an entPhysIndex for that card. The least significant byte is the second octet. A change in this list will not be reported by a trap.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheIgmpGroupIsStatic 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.10
Enable or disable static multicast group configuration.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheIgmpMcastChannelSourceId 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.11
This is a index which points to valid entry of the sheIgmpSourceIpAddressTable. If the source IP of the index is 0.0.0.0 (default), it should work as a '*' wildcard configuration and no restriction of possible source ip addresses are made (*,G). In case of IGMP mode iGMPv3 or iGMPv3Compatible ASM will be used. This setting is also valid for mode iGMPv2 usage. The configuration of other source IP's is only valid if iGMPv3 or iGMPv3Compatible mode is running. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheIgmpMcastChannelBandwith 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.12
The bandwith of this channel, with a range of 0..500 representing the bandwith with a granularity of 100kBits. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..500  

sheIgmpMcastChannelDefaultSourceIdList 1.3.6.1.4.1.231.7.1.2.1.4.7.9.1.13
This parameter contains a list of indeces which points to valid entries of the sheIgmpSourceIpAddressTable. Each octet represents one index value. The list could be empty (default). If the configured sheIgmpMcastChannelSourceId of these group points to index with IP address 0.0.0.0 (wildcard configuration, ASM), any IGMP report message in network direction is sent as IGMv3 ASM report. If the defaultList contains entries pointing to other non-zero IP-addresses, those (all of them) are used to generate an IGMPv3 SSM report packet in network direction. In case of IGMP provider mode IGMPv3 or IGMPv3Compatible the default IP list is checked with channel as key for any received ASM packet to determine the transmission mode (ASM,SSM) and source address for packets sent in network direction. This configuration is not valid for IGMPv2 provider mode. This configuration here will outvote a similar configuration for the corresponding IgmpProvider. New parameter with SHE R2.8 maintenance.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..100)  

sheIgmpGroupControl 1.3.6.1.4.1.231.7.1.2.1.4.7.10
OBJECT IDENTIFIER    

sheIgmpGroupControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.10.1
createIgmpGroupEntry: sheIgmpGroupControlIpAddress sheIgmpGroupControlName sheIgmpGroupControlProviderId sheIgmpGroupControlMcastGroupPackageList sheIgmpGroupControlIsStatic sheIgmpMcastChannelControlSourceId (new with R2.8) sheIgmpMcastChannelControlDefaultSourceIdList (new with R2.8 maintenance) modifyIgmpGroupEntry: sheIgmpGroupControlIndex sheIgmpGroupControlIpAddress sheIgmpGroupControlName sheIgmpGroupControlMcastGroupPackageList sheIgmpGroupControlIsStatic sheIgmpMcastChannelControlSourceId (new with R2.8) sheIgmpMcastChannelControlDefaultSourceIdList (new with R2.8 maintenance) deleteIgmpGroupEntry: sheIgmpGroupControlIndex New with SHE R2.8: setIgmpMcastChannelParameter: sheIgmpGroupControlIndex sheIgmpMcastChannelControlBandwith
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheIgmpGroupControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.10.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheIgmpGroupControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.7.10.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpGroupControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.10.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheIgmpGroupControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.7.10.5
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpGroupControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.10.6
The index of the sheIgmpGroupEntry to be modified. parameter for - modifyIgmpGroupEntry - deleteIgmpGroupEntry
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000  

sheIgmpGroupControlIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.7.10.7
The used Multicast IP-Address. parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry If these Address is set to 00000000, it should work as a * wildcard configuration.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheIgmpGroupControlName 1.3.6.1.4.1.231.7.1.2.1.4.7.10.8
A unique name for this multicast group. Spaces and other special characters (: o) are not allowed!! parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheIgmpGroupControlProviderId 1.3.6.1.4.1.231.7.1.2.1.4.7.10.9
That is the index of the corresponding sheIgmpProviderTable entry. parameter for - createIgmpGroupEntry
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

sheIgmpGroupControlMcastGroupPackageList 1.3.6.1.4.1.231.7.1.2.1.4.7.10.10
That is a list of available corresponding indices of the sheIgmpMcastGroupPackageTable where this group is a member. Each index has 16 bit. parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..65535)  

sheIgmpGroupControlIsStatic 1.3.6.1.4.1.231.7.1.2.1.4.7.10.11
Enable or disable static multicast group configuration.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheIgmpMcastChannelControlSourceId 1.3.6.1.4.1.231.7.1.2.1.4.7.10.12
look at table. New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheIgmpMcastChannelControlBandwith 1.3.6.1.4.1.231.7.1.2.1.4.7.10.13
look at table. parameter for: -setIgmpMcastChannelParameter: New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..500  

sheIgmpMcastChannelControlDefaultSourceIdList 1.3.6.1.4.1.231.7.1.2.1.4.7.10.14
look at table New parameter with SHE R2.8 maintenance.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..100)  

sheIgmpMcastGroupPackageTable 1.3.6.1.4.1.231.7.1.2.1.4.7.11
The table contains entry's they combines multicast groups to a multicast group package.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpMcastGroupPackageEntry

sheIgmpMcastGroupPackageEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.11.1
One entry for each multicast group package.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpMcastGroupPackageEntry  

sheIgmpMcastGroupPackageIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.11.1.1
Index of the package-table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheIgmpMcastGroupPackageName 1.3.6.1.4.1.231.7.1.2.1.4.7.11.1.2
That should be a descriptional name. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheIgmpMcastGroupPackageGroupList 1.3.6.1.4.1.231.7.1.2.1.4.7.11.1.3
That is a list of pairs of octets each identifying a corresponding index of the sheIgmpGroupTable. It shows the groups that are members of the package. The list is updated by the NE when the package list of a group is modified. The least significant byte is the second octet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

sheIgmpMcastGroupPackageControl 1.3.6.1.4.1.231.7.1.2.1.4.7.12
OBJECT IDENTIFIER    

sheIgmpMcastGroupPackageControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.12.1
createIgmpMcastGroupPackage: sheIgmpMcastGroupPackageControlName deleteIgmpMcastGroupPackage: sheIgmpMcastGroupPackageControlIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheIgmpMcastGroupPackageControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.12.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheIgmpMcastGroupPackageControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.7.12.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpMcastGroupPackageControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.12.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheIgmpMcastGroupPackageControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.7.12.5
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpMcastGroupPackageControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.12.6
A table index.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheIgmpMcastGroupPackageControlName 1.3.6.1.4.1.231.7.1.2.1.4.7.12.7
That should be a descriptional name. Spaces and other special characters (: o) are not allowed!! parameter for - createIgmpMcastGroupPackage
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sheIgmpPortGroupsTable 1.3.6.1.4.1.231.7.1.2.1.4.7.13
For the subscriber bridge ports (first table index is sheBridgePortIndex) the table has entries for all multicast groups a port has currently joined. Because IgmpV3 allow the configuration of wildcard's for used multicast and/or source IP address, R2.8 maintenance modify the second table index to a free running index and add parameter to show the used multicast IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpPortGroupsEntry

sheIgmpPortGroupsEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.13.1
If IGMPv3 is running, it represent a joined channel!
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpPortGroupsEntry  

sheIgmpPortGroupsStpIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.7.13.1.1
The IP address of the subsribers host (set top box) that has joined the multicast group. Each Ip address is a set of 4 octets. Expanded with R2.8: If Igmpv3 is running up to five boxes could be listed here.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4..20)  

sheIgmpPortGroupsTimeFirstMembRep 1.3.6.1.4.1.231.7.1.2.1.4.7.13.1.2
The time when the first membership report for the joined multicast group has been received from the subscriber. Note: Set to obsolete with R2.8 - no valid information could be returned!
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpPortGroupsTimeLastMembRep 1.3.6.1.4.1.231.7.1.2.1.4.7.13.1.3
The time when the last membership report for the joined multicast group has been received from the subscriber.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpPortGroupsFiltermode 1.3.6.1.4.1.231.7.1.2.1.4.7.13.1.4
This parameter may be either INCLUDE or EXCLUDE. In INCLUDE mode, reception of packets sent to the specified multicast address is requested *only* from those IP source address listed in the source-id parameter. In EXCLUDE mode, reception of packets sent to the given multicast address is requested from all IP source addresses *except* those listed in the source-id parameter. New parameter with SHE R2.8 and only valid for IGMPv3.
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpPortGroupsFiltermodeType  

sheIgmpPortGroupsSourceId 1.3.6.1.4.1.231.7.1.2.1.4.7.13.1.5
This is an IP unicast addresses from which multicast reception is desired or not desired, depending on the filter mode. IP address entry consist of 4 Octets and should be a subset or identical to the corresponding sheIgmpMcastChannelSourceId of the joined group. New parameter with SHE R2.8 and only valid for IGMPv3.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

sheIgmpPortGroupsIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.7.13.1.6
The used Multicast IP-Address of the joined group. New parameter with SHE R2.8 maintenance.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheIgmpPortGroupsIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.13.1.7
The new second tableIndex starting with R2.8 maintenance. It is a free running Index which show the amount of actual joined groups by this subscriber.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1000  

sheIgmpNotifications 1.3.6.1.4.1.231.7.1.2.1.4.7.14
OBJECT IDENTIFIER    

sheIgmpModeModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.1
The general IGMP operation mode has been modified by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.7.14.2
A new entry in the sheIgmpProfileTable has been created by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.3
An entry in the sheIgmpProfileTable has been modified by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.7.14.4
An entry in the sheIgmpProfileTable has been deleted by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileControlResult 1.3.6.1.4.1.231.7.1.2.1.4.7.14.5
Notification of port command ending and result in case of long running command.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileVlanEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.7.14.6
A new entry in the sheIgmpProfileVlanTable has been created by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileVlanEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.7
An entry in the sheIgmpProfileVlanTable has been modified by the NE. The sheIgmpProfileVlanMcastEgressPorts has changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileVlanEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.7.14.8
An entry in the sheIgmpProfileVlanTable has been deleted by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileVlanControlResult 1.3.6.1.4.1.231.7.1.2.1.4.7.14.9
Notification of port command ending and result in case of long running command.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpGroupEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.7.14.10
A new entry in the sheIgmpGroupTable has been created by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpGroupEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.11
An entry in the sheIgmpGroupTable has been modified by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpGroupEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.7.14.12
An entry in the sheIgmpGroupTable has been deleted by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpGroupControlResult 1.3.6.1.4.1.231.7.1.2.1.4.7.14.13
Notification of port command ending and result in case of long running command.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpMcastGroupPackageEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.7.14.14
An entry in the sheIgmpMcastGroupPackageTable has been created by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpMcastGroupPackageEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.15
An entry in the sheIgmpMcastGroupPackageTable has been modified by the NE. The sheIgmpMcastGroupPackageGroupList has changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpMcastGroupPackageEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.7.14.16
An entry in the sheIgmpMcastGroupPackageTable has been deleted by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpMcastGroupPackageControlResult 1.3.6.1.4.1.231.7.1.2.1.4.7.14.17
Notification of port command ending and result in case of long running command.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpMaxJoinedSubscriberModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.18
The general IGMP MaxJoinedSubscriber-Value has been modified by the operator. Note: This parameter is not longer supported starting with release SHE R2.6.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sheIgmpFloodVlanCreated 1.3.6.1.4.1.231.7.1.2.1.4.7.14.19
An entry in the sheIgmpFloodVlanTable was created by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpFloodVlanDeleted 1.3.6.1.4.1.231.7.1.2.1.4.7.14.20
An entry in the sheIgmpFloodVlanTable was deleted by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileVlanDot1pModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.21
An entry of Dot1p in the sheIgmpProfileVlanTable has been modified by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpMaxJoinedGroupModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.22
The maximum number of multicast group that a subscriber can join has been modified by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpProfileChannelAdmissionModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.24
IGMP Mcast admission control feature configuration done. New with R2.8.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpChannelParameterModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.25
IGMPv3 group channel releated parameters modified.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpSourceIpEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.7.14.26
Igmpv3 SourceIpAddress entry created.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpSourceIpEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.7.14.27
Igmpv3 SourceIpAddress entry deleted.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpTagModeModified 1.3.6.1.4.1.231.7.1.2.1.4.7.14.34
The general IGMP Tag parameterS has been modified by the operator.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpPerformance 1.3.6.1.4.1.231.7.1.2.1.4.7.16
OBJECT IDENTIFIER    

sheIgmpPerformanceMonitoring 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1
OBJECT IDENTIFIER    

sheIgmpPmObjectTable 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.1
The table holds all IGMP PM objects existing in the NE.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpPmObjectEntry

sheIgmpPmObjectEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.1.1
A table entry shows the multicast group a PM object is related to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpPmObjectEntry  

sheIgmpPmObjectIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.1.1.1
Unique index for IGMP PM objects existing in the NE. One multicast group can have one PM object, including both interval types.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1000  

sheIgmpPmObjectGroupIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.1.1.2
Index sheIgmpGroupIndex of the sheIgmpGroupTable selects the multicast group a PM object is related to.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1000  

sheIgmpPmCurrentTable 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2
This table contains the entries for Performance Monitoring for multicast groups of the current 15 minute interval and the current day.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpPmCurrentEntry

sheIgmpPmCurrentEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1
An entry describing the current PM data of a multicast group for a certain interval type. Indices are sheIgmpPmObjectIndex and sheIgmpPmCurrentIntervalType.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpPmCurrentEntry  

sheIgmpPmCurrentIntervalType 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.1
This attribute is used to select between the 15 min or the day accumulation types.
Status: current Access: read-only
OBJECT-TYPE    
  ShePmIntervalType  

sheIgmpPmCurrentAdminState 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.2
This read-write attribute is used to activate (up) and deactivate (down) performance monitoring for the multicast group and interval type.
Status: current Access: read-write
OBJECT-TYPE    
  SheAdminStateType  

sheIgmpPmCurrentSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.3
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
Status: current Access: read-only
OBJECT-TYPE    
  ShePmSuspectFlagType  

sheIgmpPmCurrentHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.4
The number of history entries configured for the multicast group and interval type. This attribute is used for history data collection. The default value is 1 and means at least one history entry is desired.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmCurrentHistEntriesAvailable 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.5
This read-only attribute indicates how many HistEntries are already available. The range of values is between 0 and sheIgmpPmCurrentHistEntrySize. Thereby 0 means that this entry is not valid.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmCurrentElapsedTime 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.6
This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmCurrentMembershipReportsFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.7
Successful join requests for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmCurrentPeakMembershipReportsFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.8
Peak of successful join requests per second for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmCurrentTimeOfPeakMembershipReports 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.9
Time and date of the peak of successful join requests per second for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpPmCurrentGroupLeavesFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.10
IGMP group leave messages for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmCurrentPeakGroupLeavesFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.11
Peak of IGMP group leave messages per second for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmCurrentTimeOfPeakGroupLeaves 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.12
Time and date of the peak of IGMP group leave messages per second for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpPmCurrentMembershipReportsToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.13
Successful join requests for the multicast group sent to the router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmCurrentGroupLeavesToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.14
IGMP group leave messages for the multicast group sent to the router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmCurrentPeakMulticastLeaves 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.2.1.15
The peak number of the multicast tree leaves (branches) for the multicast group shows the peak number of joined subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmHistoryTableTable 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3
A table containing all IGMP PM history data. Indices of the table are the PM object, the interval type and the record number.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpPmHistoryTableEntry

sheIgmpPmHistoryTableEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1
An entry describing the history PM data of a multicast group for a certain interval type and record number.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpPmHistoryTableEntry  

sheIgmpPmHistoryIntervalType 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.1
This attribute is used to select between the 15 min or the day accumulation types.
Status: current Access: read-only
OBJECT-TYPE    
  ShePmIntervalType  

sheIgmpPmHistoryEntryNumber 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.2
This attribute is an index used to address the PM history entry. Entry 1 is the most recent. The range of values is between 1 and sheIgmpPmCurrentHistEntrySize.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmHistorySuspectFlag 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.3
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
Status: current Access: read-only
OBJECT-TYPE    
  ShePmSuspectFlagType  

sheIgmpPmHistoryPeriodEndTime 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.4
Date/time at the end of the selected interval.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpPmHistoryMembershipReportsFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.5
Successful join requests for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmHistoryPeakMembershipReportsFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.6
Peak of successful join requests per second for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmHistoryTimeOfPeakMembershipReports 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.7
Time and date of the peak of successful join requests per second for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpPmHistoryGroupLeavesFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.8
IGMP group leave messages for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmHistoryPeakGroupLeavesFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.9
Peak of IGMP group leave messages per second for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmHistoryTimeOfPeakGroupLeaves 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.10
Time and date of the peak of IGMP group leave messages per second for the multicast group received from the subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpPmHistoryMembershipReportsToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.11
Successful join requests for the multicast group sent to the router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmHistoryGroupLeavesToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.12
IGMP group leave messages for the multicast group sent to the router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmHistoryPeakMulticastLeaves 1.3.6.1.4.1.231.7.1.2.1.4.7.16.1.3.1.13
The peak number of the multicast tree leaves (branches) for the multicast group shows the peak number of joined subscriber ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPerformanceControl 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2
OBJECT IDENTIFIER    

sheIgmpPmControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.1
createPmObject sheIgmpPmControlGroupIndex sheIgmpPmControlHistEntrySize modifyPmObject sheIgmpPmControlObjectIndex sheIgmpPmControlIntervalType sheIgmpPmControlHistEntrySize deletePmObject sheIgmpPmControlObjectIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheIgmpPmControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheIgmpPmControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheIgmpPmControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.5
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpPmControlObjectIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.6
Index sheIgmpPmObjectIndex of the PM object in the sheIgmpPmObjectTable to be modified or deleted. parameter for modifyPmObject deletePmObject
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmControlObjectGroupIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.7
Index sheIgmpGroupIndex of the sheIgmpGroupTable selects the multicast group a PM object is created for. parameter for createPmObject
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1000  

sheIgmpPmControlIntervalType 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.8
This attribute is used to select between the 15 min or the day accumulation types. parameter for modifyPmObject
Status: current Access: read-write
OBJECT-TYPE    
  ShePmIntervalType  

sheIgmpPmControlHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.9
The number of history entries configured for the multicast group and interval type. This attribute is used for history data collection. The default value is 1 and means at least one history entry is desired. In case of PM object creation the number of 15 min entries is set and the number of 24 h entries is always 1. parameter for createPmObject modifyPmObject
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheIgmpPmControlRemainingHistoryEntries 1.3.6.1.4.1.231.7.1.2.1.4.7.16.2.10
The number of history entries which are still available for the PM data collection within the NE. The memory for PM data is limited. The manager can read this attribute before/after the execution of PM object commands to inform himself about the remaining history size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpPerformanceNotifications 1.3.6.1.4.1.231.7.1.2.1.4.7.16.3
OBJECT IDENTIFIER    

sheIgmpPmObjectCreated 1.3.6.1.4.1.231.7.1.2.1.4.7.16.3.1
IGMP PM object has been created.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpPmObjectModified 1.3.6.1.4.1.231.7.1.2.1.4.7.16.3.2
IGMP PM object has been modified.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpPmObjectDeleted 1.3.6.1.4.1.231.7.1.2.1.4.7.16.3.3
IGMP PM object has been deleted.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIgmpPerformanceConformance 1.3.6.1.4.1.231.7.1.2.1.4.7.16.4
OBJECT IDENTIFIER    

sheIgmpPerformanceCompliances 1.3.6.1.4.1.231.7.1.2.1.4.7.16.4.1
OBJECT IDENTIFIER    

sheIgmpPerformanceCompliance 1.3.6.1.4.1.231.7.1.2.1.4.7.16.4.1.1
Description.
Status: current Access: read-only
MODULE-COMPLIANCE    

sheIgmpPerformanceGroups 1.3.6.1.4.1.231.7.1.2.1.4.7.16.4.2
OBJECT IDENTIFIER    

sheIgmpPmObjectGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.16.4.2.1
Description.
Status: current Access: read-only
OBJECT-GROUP    

sheIgmpPmCurrentGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.16.4.2.2
Description.
Status: current Access: read-only
OBJECT-GROUP    

sheIgmpPmHistoryGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.16.4.2.3
Description.
Status: current Access: read-only
OBJECT-GROUP    

sheIgmpPmControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.16.4.2.4
Description.
Status: current Access: read-only
OBJECT-GROUP    

sheIgmpPmNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.16.4.2.5
Description.
Status: current Access: read-only
NOTIFICATION-GROUP    

sheIgmpStatistics 1.3.6.1.4.1.231.7.1.2.1.4.7.17
OBJECT IDENTIFIER    

sheIgmpStatsGroupTable 1.3.6.1.4.1.231.7.1.2.1.4.7.17.1
The table holds IGMP statistics group table in the NE.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpStatsGroupEntry

sheIgmpStatsGroupEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.17.1.1
The table entry shows the IGMP group statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpStatsGroupEntry  

sheIgmpStatsGroupIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.17.1.1.1
Identifier of sheIgmpGroupTable
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheIgmpStatsGroupTimeSinceLastMembershipReport 1.3.6.1.4.1.231.7.1.2.1.4.7.17.1.1.2
Time since last Membership Report was received for acticve dynamic multicast cross-connection.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpStatsBase 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2
OBJECT IDENTIFIER    

sheIgmpStatsNumberOfGroupsToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.1
The Number of active multicast connections cross-connected by the DSLAM
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsNumberOfGroupsToHost 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.2
The Number of different ip multicast groups currently connected to end users
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsNumberOfQueryReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.3
The Number of Igmp query message received by DSLAM
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsNumberOfReportReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.4
The Number of Igmp report message received by DSLAM
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsNumberOfLeaveReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.5
The Number of Igmp leave message received by DSLAM
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsNumberOfInvalidReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.6
The Number of invalid message received by DSLAM
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsPeakNumberOfActiveGroupToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.7
The number of active multicast connections cross-connected by the DSLAM per second when the peak
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsTimeOfPeakNumberOfActiveGroupToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.8
Time and date of the peak of active multicast connections cross-connected by the DSLAM
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpStatsPeakNumberOfActiveGroupFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.9
The number of different ip multicast groups currently connected to end users per second when the peak
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsTimeOfPeakNumberOfActiveGroupFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.10
Time and date of the peak of different ip multicast groups currently connected to end users
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpStatsNumberOfMsgPerSec 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.11
IGMP-messages-rate. The number of IGMP messages received by the DSLAM in one second.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpStatsPeakNumberOfMsgPerSec 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.12
Peak-IGMP-messages-rate. The maximum value of IGMP-messages-rate.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpStatsTimeOfPeakNumberOfMsgPerSec 1.3.6.1.4.1.231.7.1.2.1.4.7.17.2.13
Time and date of the peak of IGMP-messages-rate.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpStatsBaseControl 1.3.6.1.4.1.231.7.1.2.1.4.7.17.3
OBJECT IDENTIFIER    

sheIgmpStatsBaseControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.17.3.1
Controlrequest for configuration. 741 - clearIgmpStatsBase
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpStatsBaseControlRequestType  

sheIgmpStatsBaseControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.17.3.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpStatsBaseControlStatusType  

sheIgmpStatsBaseControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.7.17.3.3
The time stamp of the last command (end of command)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpStatsBaseControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.17.3.4
Result of the last command
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpStatsBaseControlReqResultType  

sheIgmpStatsPortTable 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4
The table holds IGMP statistics port table in the NE.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpStatsPortEntry

sheIgmpStatsPortEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1
The table entry shows the IGMP port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpStatsPortEntry  

sheIgmpStatsPortNumberOfGroups 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1.1
The Number of different ip multicast groups currently connected to end user
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsPortNumberOfQueryReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1.2
The Number of Igmp query message received from a subscriber port
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsPortNumberOfReportReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1.3
The Number of Igmp report message received from a subscriber port
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsPortNumberOfLeaveReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1.4
The Number of Igmp leave message received from a subscriber port
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsPortNumberOfInvalidReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1.5
The Number of invalid message received from a subscriber port
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsPortPeakNumberOfActiveGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1.6
Number of active multicast group when the peak
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpStatsPortTimeOfPeakNumberOfActiveGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1.7
Time and date of the peak of active multicast group
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpStatsPortNumberOfDroppedByCA 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1.8
Number of IGMP msg dropped by conditional access (if CPV failed or if max number of active m/c channels is exceeded). New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpStatsPortNumberOfDroppedByAC 1.3.6.1.4.1.231.7.1.2.1.4.7.17.4.1.9
Number of IGMP msg dropped by admission control (if max m/c bandwidth on a bport is exceeded or if max number of non-premium channels is exceeded). New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpStatsPortControl 1.3.6.1.4.1.231.7.1.2.1.4.7.17.5
OBJECT IDENTIFIER    

sheIgmpStatsPortControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.17.5.1
Controlrequest for configuration. 742 - clearIgmpStatsPort
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpStatsPortControlRequestType  

sheIgmpStatsPortControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.17.5.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpStatsPortControlStatusType  

sheIgmpStatsPortControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.7.17.5.3
The time stamp of the last command (end of command)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpStatsPortControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.17.5.4
Result of the last command
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpStatsPortControlReqResultType  

sheIgmpStatsPortControlBridgePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.17.5.5
Table index (A bridgePort-identifier)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheIgmpStatsProviderTable 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6
The table contains entries for statistics of igmp providers of DSLAM
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpStatsProviderEntry

sheIgmpStatsProviderEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1
The table entry shows the IGMP provider statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpStatsProviderEntry  

sheIgmpStatsProviderNumberOfChannelsToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.1
The Number of active multicast channels connections cross-connected by a provider
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsProviderNumberOfChannelsToHost 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.2
The Number of different ip multicast channels currently connected to end users
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsProviderNumberOfQueryReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.3
The Number of Igmp query message received by provider.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsProviderNumberOfReportReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.4
The Number of Igmp report message received by provider.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsProviderNumberOfLeaveReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.5
The Number of Igmp leave message received by provider.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsProviderNumberOfInvalidReceived 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.6
The Number of invalid message received by provider.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsProviderPeakNumberOfActiveChannelToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.7
The number of active multicast connections cross-connected by the provider per second when the peak.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelToRouter 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.8
Time and date of the peak of active multicast connections cross-connected by the provider.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpStatsProviderPeakNumberOfActiveChannelFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.9
The number of different ip multicast channels currently connected to end users per second when the peak
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelFromHost 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.10
Time and date of the peak of different ip multicast channels currently connected to end users
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpStatsProviderNumberOfMsgPerSec 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.11
IGMP-messages-rate. The number of IGMP messages received by the provider in one second.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpStatsProviderPeakNumberOfMsgPerSec 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.12
Peak-IGMP-messages-rate. The maximum value of IGMP-messages-rate.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpStatsProviderTimeOfPeakNumberOfMsgPerSec 1.3.6.1.4.1.231.7.1.2.1.4.7.17.6.1.13
Time and date of the peak of IGMP-messages-rate.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheIgmpStatsProviderControl 1.3.6.1.4.1.231.7.1.2.1.4.7.17.7
OBJECT IDENTIFIER    

sheIgmpStatsProviderControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.17.7.1
Controlrequest for configuration. 743 - clearIgmpStatsProvider: sheIgmpStatsProviderIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpStatsProviderControlRequestType  

sheIgmpStatsProviderControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.17.7.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpStatsBaseControlStatusType  

sheIgmpStatsProviderControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.7.17.7.3
The time stamp of the last command (end of command)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpStatsProviderControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.17.7.4
Result of the last command
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpStatsBaseControlReqResultType  

sheIgmpStatsProviderControlProviderIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.17.7.5
A provider index.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheIgmpFloodVlanTable 1.3.6.1.4.1.231.7.1.2.1.4.7.18
The table has one provider entry. It contains the provider VLAN and the host and querier settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpFloodVlanEntry

sheIgmpFloodVlanEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.18.1
In first release we will only support one table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpFloodVlanEntry  

sheIgmpFloodVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.18.1.1
A vlanid of which a packet has a destination address as reserved multicast should be flooded without processing. It is for igmp under L2VPN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4093  

sheIgmpFloodVlanControl 1.3.6.1.4.1.231.7.1.2.1.4.7.19
OBJECT IDENTIFIER    

sheIgmpFloodVlanControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.19.1
createIgmpFloodVlan(743) sheIgmpFloodVlanControlVlanId deleteIgmpFloodVlan(744) sheIgmpFloodVlanControlVlanId
Status: current Access: read-write
OBJECT-TYPE    
  SheIgmpFloodVlanControlRequestType  

sheIgmpFloodVlanControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.19.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheIgmpFloodVlanControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.7.19.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpFloodVlanControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.7.19.4
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpFloodVlanControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.19.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheIgmpFloodVlanControlVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.19.6
Table index
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4093  

sheIgmpSourceIpAddressTable 1.3.6.1.4.1.231.7.1.2.1.4.7.20
New IGMPv3 configuration with SHE R2.8.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpSourceIpAddressEntry

sheIgmpSourceIpAddressEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.20.1
This is an unordered list of zero or more IP unicast addresses from which multicast reception is possible. An implementation MAY impose a limit on the size of source lists, but that limit MUST NOT be less than 64 addresses per list. When an operation causes the source list size limit to be exceeded, the service interface MUST return an error.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpSourceIpAddressEntry  

sheIgmpSourceIpIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.20.1.1
Table Index. A maximum number of 100 different addresses could be configured inside the NE. These index will be configured in sheIgmpGroupSourceList to select the valid source ip address per group (channel). A default configuration with IP 0.0.0.0 is always available and could not be changed or removed. Only valid for IGMPv3 configuration. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheIgmpSourceIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.7.20.1.2
This is IP unicast addresses from which multicast reception is possible. If the source IP is 0.0.0.0, it should work as a '*' wildcard configuration (per default available). The configuration is only valid if IGMPv3 is running. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheIgmpSourceIpAddressControl 1.3.6.1.4.1.231.7.1.2.1.4.7.21
OBJECT IDENTIFIER    

sheIgmpSourceIpControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.21.1
createIgmpSourceIpAddressEntry: sheIgmpSourceIpControlAddress deleteIgmpSourceIpAddressEntry: sheIgmpSourceIpControlIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheIgmpSourceIpControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.21.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheIgmpSourceIpControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.7.21.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpSourceIpControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.21.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheIgmpSourceIpControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.7.21.5
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpSourceIpControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.21.6
A table index used for delete an entry.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheIgmpSourceIpControlAddress 1.3.6.1.4.1.231.7.1.2.1.4.7.21.7
This is IP unicast addresses from which multicast reception is possible. The configuration is only valid if IGMPv3 is running. New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheIgmpBridgePortConfig 1.3.6.1.4.1.231.7.1.2.1.4.7.22
OBJECT IDENTIFIER    

sheIgmpBridgePortProviderConfigTable 1.3.6.1.4.1.231.7.1.2.1.4.7.22.1
For the subscriber bridge ports (first table index is sheBridgePortIndex) the table has entries for all multicast provider Vlan a port has currently joined (second table index is sheIgmpProfileVlanVlanId). New supported with SHE R2.8!
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheIgmpBridgePortProviderConfigEntry

sheIgmpBridgePortProviderConfigEntry 1.3.6.1.4.1.231.7.1.2.1.4.7.22.1.1
The MCast configuration settiongs per BridgePort.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheIgmpBridgePortProviderConfigEntry  

sheIgmpBridgePortProviderVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.22.1.1.1
MCast Provider VLAN id for the bridge port (second tableindex). New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheIgmpBridgePortProviderTranslationVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.22.1.1.2
Translation VLAN id for the bridge port. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheIgmpBridgePortProviderAllowedVlanIdList 1.3.6.1.4.1.231.7.1.2.1.4.7.22.1.1.3
The octet string is a list of two octet entries each identifying a sheVlanIndex which is allowed on these bridgeport. The least significant byte is the second octet. The octet string has a variable length of up to 32 octets (max 16 vlan entrys). A entry with 0xffff is a wildCard to indicate that each vlan is allowed. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheIgmpBridgePortProviderMcastRemainBandwith 1.3.6.1.4.1.231.7.1.2.1.4.7.22.1.1.4
It is the bridge port remaining multicast bandwidth per provider. New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10000  

sheIgmpBridgePortProviderMcastACStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.22.1.1.5
It indicate the bridge port AC (admission control )status per provider. It can be accept or deny. When it is accepted, it indicates the provider still has enough bandwidth for multicast access. When it is denied, it indicates the provider is short of bandwidth for multicast access. 1 means accept, 0 means deny New parameter with SHE R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheIgmpProviderACStatus  

sheIgmpBridgePortProviderControl 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2
OBJECT IDENTIFIER    

sheIgmpBridgePortProviderControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2.1
createIgmpBridgePortProviderEntry(763): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId sheIgmpBridgePortProviderControlTranslationVlanId sheIgmpBridgePortProviderControlAllowedVlanIdList modifyIgmpBridgePortProviderEntry(764): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId sheIgmpBridgePortProviderControlTranslationVlanId sheIgmpBridgePortProviderControlAllowedVlanIdList deleteIgmpBridgePortProviderEntry(765): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheIgmpBridgePortProviderControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2.2
The index of the bridgePort to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheIgmpBridgePortProviderControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheIgmpBridgePortProviderControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheIgmpBridgePortProviderControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheIgmpBridgePortProviderControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheIgmpBridgePortProviderControlProviderVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2.7
MCast Provider VLAN id for the bridge port (second tableindex). New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheIgmpBridgePortProviderControlTranslationVlanId 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2.8
Translation VLAN id for the bridge port. New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheIgmpBridgePortProviderControlAllowedVlanIdList 1.3.6.1.4.1.231.7.1.2.1.4.7.22.2.9
The octet string is a list of two octet entries each identifying a sheVlanIndex which is allowed on these bridgeport. The least significant byte is the second octet. The octet string has a variable length of up to 32 octets (max 16 vlan entrys). A entry with 0xffff is a wildCard to indicate that each vlan is allowed. New parameter with SHE R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheIgmpBridgePortNotifications 1.3.6.1.4.1.231.7.1.2.1.4.7.22.5
OBJECT IDENTIFIER    

sheIgmpBridgePortProviderParameterCreated 1.3.6.1.4.1.231.7.1.2.1.4.7.22.5.1
send trap when bridgeport R2.8 igmp provider parameter was created.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheIgmpBridgePortProviderParameterModified 1.3.6.1.4.1.231.7.1.2.1.4.7.22.5.2
send trap when bridgeport R2.8 igmp provider parameter was modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheIgmpBridgePortProviderParameterDeleted 1.3.6.1.4.1.231.7.1.2.1.4.7.22.5.3
send trap when bridgeport R2.8 igmp provider parameter was deleted.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheIgmpConformance 1.3.6.1.4.1.231.7.1.2.1.4.7.100
OBJECT IDENTIFIER    

sheIgmpCompliances 1.3.6.1.4.1.231.7.1.2.1.4.7.100.1
OBJECT IDENTIFIER    

sheIgmpCompliance 1.3.6.1.4.1.231.7.1.2.1.4.7.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheIgmpGroups 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2
OBJECT IDENTIFIER    

sheIgmpBaseGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpProfileGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpProfileControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpProfileVlanGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.4
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpProfileVlanControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.5
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpGroupGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.6
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpGroupControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.7
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpMcastGroupPackageGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.8
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpMcastGroupPackageControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.9
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpPortGroupsGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.10
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.11
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheIgmpStatisticsGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.12
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpFloodVlanTableGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.13
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpFloodVlanControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.14
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpObsoleteGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.15
Description.
Status: obsolete Access: read-write
OBJECT-GROUP    

sheIgmpObsoleteNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.16
Description.
Status: obsolete Access: read-write
NOTIFICATION-GROUP    

sheIgmpBridgePortGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.17
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpBridgePortControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.18
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheIgmpBridgePortNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.7.100.2.19
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheQueueConfiguration 1.3.6.1.4.1.231.7.1.2.1.4.8
OBJECT IDENTIFIER    

sheQueuePriorityTable 1.3.6.1.4.1.231.7.1.2.1.4.8.1
Configure the .1p prioritys of each queue for upstream and downstream direction.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheQueuePriorityEntry

sheQueuePriorityEntry 1.3.6.1.4.1.231.7.1.2.1.4.8.1.1
One entry for each priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheQueuePriorityEntry  

sheQueuePriority 1.3.6.1.4.1.231.7.1.2.1.4.8.1.1.1
The index of that table. It represents the .1p Priority + 1,because priority values will have a range from 0-7 but index has to start always with 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sheQueueNumber 1.3.6.1.4.1.231.7.1.2.1.4.8.1.1.2
That represents the Queue-Number. Only applicable for ingress queues on iu, because cxu_b will always use only one queue for traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sheReducedQueuePriorityTable 1.3.6.1.4.1.231.7.1.2.1.4.8.2
There could a shrinking of queues on the iu in downstream direction (depending on the used IU type). So the available .1p-prioritys has to be mapped on a set of only four available queue-numbers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheReducedQueuePriorityEntry

sheReducedQueuePriorityEntry 1.3.6.1.4.1.231.7.1.2.1.4.8.2.1
One entry for each priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheReducedQueuePriorityEntry  

sheReducedQueuePriority 1.3.6.1.4.1.231.7.1.2.1.4.8.2.1.1
The index of that table. It represents the .1p Priority + 1,because priority values will have a range from 0-7 but index has to start always with 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sheReducedQueueNumber 1.3.6.1.4.1.231.7.1.2.1.4.8.2.1.2
Number of the outgoing queue, where this priority is mapped on.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4  

sheQueueControl 1.3.6.1.4.1.231.7.1.2.1.4.8.3
OBJECT IDENTIFIER    

sheQueueControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.8.3.1
modifyQueuePriorityMapping: sheQueueControlIndex sheQueueControlQueueNumber modifyReducedQueuePriorityMapping: sheQueueControlIndex sheQueueControlQueueNumber
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheQueueControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.3.2
The table-index to be modified.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheQueueControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.8.3.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheQueueControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.8.3.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheQueueControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.8.3.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheQueueControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.8.3.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheQueueControlQueueNumber 1.3.6.1.4.1.231.7.1.2.1.4.8.3.7
The range for this value depends on the used ControlRequest. In case of the Controlrequest is modifyReducedQueuePriorityMapping, the range is only 1..4!
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sheQueueModeTable 1.3.6.1.4.1.231.7.1.2.1.4.8.4
Configure queue mode depending on the interfacetype.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheQueueModeEntry

sheQueueModeEntry 1.3.6.1.4.1.231.7.1.2.1.4.8.4.1
One entry for each interface type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheQueueModeEntry  

sheQueueModeInterfaceTypeIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.4.1.1
Describes the interface type, were this queue configuration should be used. uplink downlink cascading subcascading
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeInterfaceType  

sheQueueConfigurationMode 1.3.6.1.4.1.231.7.1.2.1.4.8.4.1.2
Describes the queue mode, for this interface type. strict weighted Note: Mode 'weighted' could mean 'weighted round robin' (wrr) or 'weighted fair queueing' (wfq) and depends on the individual HW restrictions of the used board's.
Status: current Access: read-only
OBJECT-TYPE    
  SheQueueModeType  

sheQueueModeControl 1.3.6.1.4.1.231.7.1.2.1.4.8.5
OBJECT IDENTIFIER    

sheQueueModeControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.8.5.1
modifyQueueModeEntry: sheQueueModeControlIndex sheQueueModeControlMode
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheQueueModeControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.5.2
The table index to be modified.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..3  

sheQueueModeControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.8.5.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheQueueModeControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.8.5.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheQueueModeControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.8.5.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheQueueModeControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.8.5.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheQueueModeControlMode 1.3.6.1.4.1.231.7.1.2.1.4.8.5.7
Set the queue mode.
Status: current Access: read-write
OBJECT-TYPE    
  SheQueueModeType  

sheQueueWeightTable 1.3.6.1.4.1.231.7.1.2.1.4.8.6
Configure weight's of queues for upstream direction.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheQueueWeightEntry

sheQueueWeightEntry 1.3.6.1.4.1.231.7.1.2.1.4.8.6.1
One entry for each queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheQueueWeightEntry  

sheQueueIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.6.1.1
A table index. This index represents the Queue-Number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8  

sheQueueWeight 1.3.6.1.4.1.231.7.1.2.1.4.8.6.1.2
A weight value for queue if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheQueueWeightWatermarkLow 1.3.6.1.4.1.231.7.1.2.1.4.8.6.1.3
A low watermark value for a NE internal color aware queue handling. This value represents a % - Value of usage of the total Queue-Size. Default values: ------------------- Queue | Low | ------------------- 1 | 20 % | 2 | 20 % | 3 | 20 % | 4 | 20 % | 5 | 30 % | 6 | 30 % | 7 | 15 % | 8 | 15 % |
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheQueueWeightWatermarkHigh 1.3.6.1.4.1.231.7.1.2.1.4.8.6.1.4
A high watermark value for a NE internal color aware queue handling. High watermark defines additional the total used queue size as %-value of the theoretical possible queue size. Default Values: ------------ Queue | High ------------ 1 | 30 % 2 | 30 % 3 | 30 % 4 | 30 % 5 | 40 % 6 | 40 % 7 | 20 % 8 | 20 %
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheQueueWeightControl 1.3.6.1.4.1.231.7.1.2.1.4.8.7
OBJECT IDENTIFIER    

sheQueueWeightControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.8.7.1
modifyQueueWeightEntry: sheQueueWeightControlIndex sheQueueWeightControlWeight sheQueueWeightControlWatermarkLow sheQueueWeightControlWatermarkHigh
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheQueueWeightControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.7.2
The table-entry to be modified.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sheQueueWeightControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.8.7.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheQueueWeightControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.8.7.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheQueueWeightControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.8.7.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheQueueWeightControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.8.7.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheQueueWeightControlWeight 1.3.6.1.4.1.231.7.1.2.1.4.8.7.7
Look at weight-table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheQueueWeightControlWatermarkLow 1.3.6.1.4.1.231.7.1.2.1.4.8.7.8
Not needed for configuration in current scenario. This value represents a % - Value of usage of the total Queue-Size.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheQueueWeightControlWatermarkHigh 1.3.6.1.4.1.231.7.1.2.1.4.8.7.9
Not needed for configuration in current scenario.This value represents a % - Value of usage of the total Queue-Size.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheQueueNotifications 1.3.6.1.4.1.231.7.1.2.1.4.8.9
OBJECT IDENTIFIER    

sheQueuePriorityMappingModified 1.3.6.1.4.1.231.7.1.2.1.4.8.9.1
Configuration notification for priority mapping table.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheReducedQueuePriorityMappingModified 1.3.6.1.4.1.231.7.1.2.1.4.8.9.2
Configuration notification for shrink mapping table.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheQueueModeEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.8.9.3
Configuration notification for queue mode table.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheQueueWeightEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.8.9.4
Configuration notification for queue weight table.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCardQueueEntryConfigured 1.3.6.1.4.1.231.7.1.2.1.4.8.9.5
Configure the queue handling for a card.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCardQueueEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.8.9.6
Delete the queue handling for a card.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCardQueueEntryConfigResult 1.3.6.1.4.1.231.7.1.2.1.4.8.9.7
Result trap for long running command to configure the queue handling for a card.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCardQueueConfigurationTable 1.3.6.1.4.1.231.7.1.2.1.4.8.10
Configure the queue handling individuell per configured card. This will replace the general queue configuration settings. Per default, no indivudell settings are made and this table is empty (could be change during development). NEW supported with R2.8!
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheCardQueueConfigurationEntry

sheCardQueueConfigurationEntry 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1
One entry for each card, if these card should not use the global NE queue configuration parameters. If a card type will never uses the global NE parameters, a entry for this card will be automatically created during card creation process. This table uses two indices: First index is the entPhysicalIndex from entPhysicalTable for the card. Second index is sheCardQueueInterfaceTypeIndex from this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheCardQueueConfigurationEntry  

sheCardQueueInterfaceTypeIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.1
Describes the interface type, were this queue configuration should be used. Valid values for this configuration's are: uplink(1) -> for central board means uplink, for IU means interlink to cxu downlink(2) -> for central board means interlink to IU's, for IU means subcriber
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeInterfaceType  

sheCardQueueSchedulingMode 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.10
Describes the queue scheduling mode. strict weighted Note: Mode 'weighted' could mean 'weighted round robin' (wrr) or 'weighted fair queueing' (wfq) and depends on the individual HW restrictions of the used board's.
Status: current Access: read-only
OBJECT-TYPE    
  SheQueueModeType  

sheCardQueue1Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.11
A weight value for queue 1 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueue1Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.12
A watermark configuration for a NE internal colour aware queue handling for queue number 1. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCardQueue2Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.13
A weight value for queue 2 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueue2Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.14
A watermark configuration for a NE internal colour aware queue handling for queue number 2. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCardQueue3Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.15
A weight value for queue 3 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueue3Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.16
A watermark configuration for a NE internal colour aware queue handling for queue number 3. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCardQueue4Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.17
A weight value for queue 4 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueue4Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.18
A watermark configuration for a NE internal colour aware queue handling for queue number 4. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCardQueue5Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.19
A weight value for queue 5 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueue5Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.20
A watermark configuration for a NE internal colour aware queue handling for queue number 5. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCardQueue6Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.21
A weight value for queue 6 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueue6Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.22
A watermark configuration for a NE internal colour aware queue handling for queue number 6. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCardQueue7Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.23
A weight value for queue 7 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueue7Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.24
A watermark configuration for a NE internal colour aware queue handling for queue number 7. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCardQueue8Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.25
A weight value for queue 8 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueue8Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.26
A watermark configuration for a NE internal colour aware queue handling for queue number 8. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCardQueueColourAwareTCSource 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.27
Configure, how the current traffic class of a frame should detected. Valid values: none(0), dscp(2), providerBridge(4) Configuration will be currently ignored! Starting support planed for R3.5!
Status: current Access: read-only
OBJECT-TYPE    
  SheQueueColourAwareType  

sheCardQueueColourMarking 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.28
Configure, if and how the current colour should be marked. Colour marking will only work in upstream direction. Valid values: none(0), dscp(2), providerBridge(4) Configuration will be currently ignored! Starting support planed for 3.5!
Status: current Access: read-only
OBJECT-TYPE    
  SheQueueColourAwareType  

sheCardQueueDiscardPolicy 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.29
Describes the policy in case of frame discards. Possible values: tailDrop(1), wRed(2) Configuration will be currently ignored! Starting support planed for R3.5!
Status: current Access: read-only
OBJECT-TYPE    
  SheQueueDiscardPolicyType  

sheCardQueueMode 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.30
This parameter describe the general queue mode for this card. Depending on the used card type not all modes are available. modeHQS will only be supported by DSL cards with Convergate chipset and only in downstream direction. mode8QueueFlat will only be supported by VDSL2 and Shdsl2 cards and only in downstream direction. mode4QueueFlat(1) -> 4 queues per port mode8QueueFlat(2) -> 8 queues per port modeHQS(3) -> 8 queues with hierarchical queuing and scheduling. New parameter with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  SheCardQueueModeType  

sheCardQueueHqsSecondStageInputQueue 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.31
This parameter is only valid for queuemode 'modeHQS' and is don't care for the others. The queue of the second level scheduler (queuenumbers 5-8) in which the frames of the first level scheduler will be enqueued could be selected here. New parameter with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 5..8  

sheCardQueueHqsFirstStagePir 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.32
This parameter configures the peek information rate of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. Note: The PIR of the first level queuing block should not be higher than the emission rate of the respective second level queue into which the first level queues are enqueued. The given value could be adapted (rounded) in the NE to fullfill different HW dependencies. That will not shown here. For example, IU's with Convergate chipset will round the configured value to multiples of 1 kByte/s. New parameter with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..32760  

sheCardQueueHqsFirstStagePbs 1.3.6.1.4.1.231.7.1.2.1.4.8.10.1.33
This parameter configures the peek burst size of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. New parameter with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16000  

sheCardQueueConfigurationControl 1.3.6.1.4.1.231.7.1.2.1.4.8.11
OBJECT IDENTIFIER    

sheCardQueueControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.8.11.1
configureCardQueueConfigurationEntry: sheCardQueueConfigurationControlIndex sheCardQueueControlInterfaceTypeIndex ... deleteCardQueueConfigurationEntry: sheCardQueueConfigurationControlIndex sheCardQueueControlInterfaceTypeIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheCardQueueControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.11.2
The first index (entPhysicalIndex of card) to identify the table-entry to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  PhysicalIndex  

sheCardQueueControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.8.11.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheCardQueueControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.8.11.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheCardQueueControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.8.11.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheCardQueueControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.8.11.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCardQueueControlInterfaceTypeIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.11.7
The second index to identify the table-entry to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeInterfaceType  

sheCardQueueControlSchedulingMode 1.3.6.1.4.1.231.7.1.2.1.4.8.11.16
Set the queue scheduling mode.
Status: current Access: read-write
OBJECT-TYPE    
  SheQueueModeType  

sheCardQueueControlQueue1Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.11.17
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueueControlQueue1Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.11.18
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheCardQueueControlQueue2Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.11.19
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueueControlQueue2Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.11.20
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheCardQueueControlQueue3Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.11.21
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueueControlQueue3Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.11.22
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheCardQueueControlQueue4Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.11.23
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueueControlQueue4Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.11.24
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheCardQueueControlQueue5Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.11.25
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueueControlQueue5Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.11.26
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheCardQueueControlQueue6Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.11.27
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueueControlQueue6Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.11.28
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheCardQueueControlQueue7Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.11.29
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueueControlQueue7Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.11.30
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheCardQueueControlQueue8Weight 1.3.6.1.4.1.231.7.1.2.1.4.8.11.31
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

sheCardQueueControlQueue8Watermarks 1.3.6.1.4.1.231.7.1.2.1.4.8.11.32
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheCardQueueControlColourAwareTCSource 1.3.6.1.4.1.231.7.1.2.1.4.8.11.33
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  SheQueueColourAwareType  

sheCardQueueControlColourMarking 1.3.6.1.4.1.231.7.1.2.1.4.8.11.34
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  SheQueueColourAwareType  

sheCardQueueControlDiscardPolicy 1.3.6.1.4.1.231.7.1.2.1.4.8.11.35
Look at table description.
Status: current Access: read-write
OBJECT-TYPE    
  SheQueueDiscardPolicyType  

sheCardQueueControlMode 1.3.6.1.4.1.231.7.1.2.1.4.8.11.36
This parameter set the general queue mode for this card. Depending on the used card type not all modes are available. modeHQS will only be supported by DSL cards with Convergate chipset and only in downstream direction. mode8QueueFlat will only be supported by VDSL2 and Shdsl2 cards and only in downstream direction. mode4QueueFlat(1) -> 4 queues per port mode8QueueFlat(2) -> 8 queues per port modeHQS(3) -> 8 queues with hierarchical queuing and scheduling. New parameter with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  SheCardQueueModeType  

sheCardQueueControlHqsSecondStageInputQueue 1.3.6.1.4.1.231.7.1.2.1.4.8.11.37
This parameter is only valid for queuemode 'modeHQS' and is don't care for the others. The queue of the second level scheduler (queuenumbers 1-4) in which the frames of the first level scheduler will be enqueued could be selected here. New parameter with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..8  

sheCardQueueControlHqsFirstStagePir 1.3.6.1.4.1.231.7.1.2.1.4.8.11.38
This parameter configures the peek information rate of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. Note: The PIR of the first level queuing block should not be higher than the emission rate of the respective second level queue into which the first level queues are enqueued. The given value could be adapted (rounded) in the NE to fullfill different HW dependencies. That will not shown here. For example, IU's with Convergate chipset will round the configured value to multiples of 1 kByte/s. New parameter with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..32760  

sheCardQueueControlHqsFirstStagePbs 1.3.6.1.4.1.231.7.1.2.1.4.8.11.39
This parameter configures the peek burst size of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. New parameter with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..16000  

sheShapingProfileTable 1.3.6.1.4.1.231.7.1.2.1.4.8.12
The shaping profile table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheShapingProfileEntry

sheShapingProfileEntry 1.3.6.1.4.1.231.7.1.2.1.4.8.12.1
One entry for each shaping profile. Selection of the used profile will be done via ShapingProfileAssignmentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheShapingProfileEntry  

sheShapingProfileIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.12.1.1
A profile-table index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..300  

sheShapingProfileName 1.3.6.1.4.1.231.7.1.2.1.4.8.12.1.2
A descriptional name for this Shaping profile. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheShapingProfileCir 1.3.6.1.4.1.231.7.1.2.1.4.8.12.1.3
The Committed Information Rate for downstream shaping.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..102400  

sheShapingProfileCbs 1.3.6.1.4.1.231.7.1.2.1.4.8.12.1.4
The Committed Burst Size for downstream shaping.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 96..333000  

sheShapingProfileControl 1.3.6.1.4.1.231.7.1.2.1.4.8.13
OBJECT IDENTIFIER    

sheShapingProfileControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.8.13.1
createShapingProfile: sheShapingProfileControlName sheShapingProfileControlCir sheShapingProfileControlCbs deleteShapingProfile: sheShapingProfileControlIndex modifyShapingProfile: sheShapingProfileControlIndex sheShapingProfileControlName sheShapingProfileControlCir sheShapingProfileControlCbs
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheShapingProfileControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.13.2
Index of the configured table entry. Needed for modify or delete.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..300  

sheShapingProfileControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.8.13.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheShapingProfileControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.8.13.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheShapingProfileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.8.13.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheShapingProfileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.8.13.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShapingProfileControlProfileName 1.3.6.1.4.1.231.7.1.2.1.4.8.13.7
look at ShapingProfileTable... Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheShapingProfileControlProfileCir 1.3.6.1.4.1.231.7.1.2.1.4.8.13.8
look at ShapingProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..102400  

sheShapingProfileControlProfileCbs 1.3.6.1.4.1.231.7.1.2.1.4.8.13.9
look at ShapingProfileTable...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 96..333000  

sheShapingProfileAssignmentTable 1.3.6.1.4.1.231.7.1.2.1.4.8.14
The shaping profile assignment table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheShapingProfileAssignmentEntry

sheShapingProfileAssignmentEntry 1.3.6.1.4.1.231.7.1.2.1.4.8.14.1
One entry for each assigned shaping profile. The assignment will use two indeces. First index is the ifIndex of the used subscriber port. Second index is the queue number. New with R2.8: There are two special values for queuenumber are supported, which allow to assign such a shaping profile to the lower (1..4) or upper (5..8) queue-group. If mode4QueueFlat is running, only the lower group is available. One shaping profile for all queues in queuemode mode8QueueFlat or modeHqs is not supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheShapingProfileAssignmentEntry  

sheShapingProfileAssignmentQueueNumber 1.3.6.1.4.1.231.7.1.2.1.4.8.14.1.1
The second index of this table. That represents the used Queue-Number for this ShapingProfile assignment. Note: Depending on the used card type, the number of available queues could be restricted to 4. An assignment to 8 queues will always be possible and the IU will then ignore the upper 4 queue configurations. New with R2.8: Two special values allow the assignment of a shapingProfile to a group of queues for this DSL-port and not only to a single queue of this port. '0' will assign this to the DSL port. For IU_CG boards, this is not fully supported in queue mode 'mode8QueueFlat'. Here this setting will only apply to the higher prio queue group (queue 5..8). Additionally a specific shaper should be configured for the lower prio queue group (queue 1..4) with value '255'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..8 | 255  

sheShapingProfileAssignmentProfileIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.14.1.2
This value represents a valid index from sheShapingProfileTable which should be used for this DSL-Port and Queue-Number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..300  

sheShapingProfileAssignmentControl 1.3.6.1.4.1.231.7.1.2.1.4.8.15
OBJECT IDENTIFIER    

sheShapingProfileAssignmentControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.8.15.1
assignShapingProfile: sheShapingProfileAssignmentControlIndex sheShapingProfileAssignmentControlQueueNumber sheShapingProfileAssignmentControlProfileIndex deleteShapingProfileAssignment: sheShapingProfileAssignmentControlIndex sheShapingProfileAssignmentControlQueueNumber
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheShapingProfileAssignmentControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.15.2
ifIndex of the DSL-Interface where a shaping profile should be assigned. First index value for assignment.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

sheShapingProfileAssignmentControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.8.15.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheShapingProfileAssignmentControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.8.15.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheShapingProfileAssignmentControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.8.15.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheShapingProfileAssignmentControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.8.15.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShapingProfileAssignmentControlQueueNumber 1.3.6.1.4.1.231.7.1.2.1.4.8.15.7
QueueNumber of the DSL-Interface where a shaping profile should be assigned. Second index value for assignment. New with R2.8: Two special values allow the assignment of a shapingProfile to a group of queues for this DSL-port and not only to a single queue of this port. '0' will assign this to the DSL port. For IU_CG boards, this is not fully supported in queue mode 'mode8QueueFlat'. Here this setting will only apply to the higher prio queue group (queue 5..8). Additionally a specific shaper should be configured for the lower prio queue group (queue 1..4) with value '255'.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..8 | 255  

sheShapingProfileAssignmentControlProfileIndex 1.3.6.1.4.1.231.7.1.2.1.4.8.15.8
This value represents a valid index from sheShapingProfileTable which should be used for this DSL-Port and Queue-Number.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..300  

sheShapingNotifications 1.3.6.1.4.1.231.7.1.2.1.4.8.16
OBJECT IDENTIFIER    

sheShapingProfileCreated 1.3.6.1.4.1.231.7.1.2.1.4.8.16.2
Configuration notification. A new shaping profile was created in sheShapingProfileTable.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShapingProfileModified 1.3.6.1.4.1.231.7.1.2.1.4.8.16.3
Configuration notification. A shaping profile was modified in sheShapingProfileTable.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShapingProfileDeleted 1.3.6.1.4.1.231.7.1.2.1.4.8.16.4
Configuration notification. A shaping profile was deleted from sheShapingProfileTable.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShapingProfileAssigned 1.3.6.1.4.1.231.7.1.2.1.4.8.16.5
Configuration notification. A shaping profile from sheShapingProfileTable was assigned to port.queuenumber.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShapingProfileAssignmentDeleted 1.3.6.1.4.1.231.7.1.2.1.4.8.16.6
Configuration notification. An existing shaping profile assignment was deleted from sheShapingProfileAssignmentTable.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheQueueConformance 1.3.6.1.4.1.231.7.1.2.1.4.8.100
OBJECT IDENTIFIER    

sheQueueCompliances 1.3.6.1.4.1.231.7.1.2.1.4.8.100.1
OBJECT IDENTIFIER    

sheQueueCompliance 1.3.6.1.4.1.231.7.1.2.1.4.8.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheQueueGroups 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2
OBJECT IDENTIFIER    

sheQueuePriorityGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheQueuePriorityControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheQueueModeGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.4
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheQueueModeControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.5
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheQueueWeightGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.6
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheQueueWeightControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.7
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheQueueCardGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.8
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheQueueCardControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.9
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheQueueNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.10
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheShapingGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.11
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheShapingControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.12
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheShapingNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.8.100.2.13
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheErp 1.3.6.1.4.1.231.7.1.2.1.4.9
OBJECT IDENTIFIER    

sheErpBase 1.3.6.1.4.1.231.7.1.2.1.4.9.1
OBJECT IDENTIFIER    

sheErpBaseParam 1.3.6.1.4.1.231.7.1.2.1.4.9.1.1
OBJECT IDENTIFIER    

sheErpDomainTrafficVlan 1.3.6.1.4.1.231.7.1.2.1.4.9.1.1.1
This octet string with 4096 octets maps payload VLANs to ERP domains: one octet containing the sheErpDomainIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one ERP domain at a time. In this way the ERP domains of the sheErpDomainTable can be used on a per-VLAN basis. The value 0 indicates that no ERP domain is assigned to that VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4096)  

sheErpBaseControl 1.3.6.1.4.1.231.7.1.2.1.4.9.1.2
OBJECT IDENTIFIER    

sheErpBaseControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.9.1.2.1
A SetRequest on this attribute starts a command execution process in the NetElement. - modifyErpDomainTrafficVlan parameters: sheErpBaseControlDomainTrafficVlan
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheErpBaseControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.9.1.2.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheErpBaseControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.9.1.2.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheErpBaseControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.9.1.2.4
Command result (error code) attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheErpBaseControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.9.1.2.5
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheErpBaseControlDomainTrafficVlan 1.3.6.1.4.1.231.7.1.2.1.4.9.1.2.6
This octet string with 4096 octets maps payload VLANs to ERP domains: one octet containing the sheErpDomainIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one ERP domain at a time. In this way the ERP domains of the sheErpDomainTable can be used on a per-VLAN basis. The value 0 indicates that no ERP domain is assigned to that VLAN. parameter for - modifyErpDomainTrafficVlan
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4096)  

sheErpDomain 1.3.6.1.4.1.231.7.1.2.1.4.9.2
OBJECT IDENTIFIER    

sheErpDomainTable 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1
ERP domains configuration table with static entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheErpDomainEntry

sheErpDomainEntry 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1
ERP Domain entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheErpDomainEntry  

sheErpDomainIndex 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.1
An index value that uniquely identifies an ERP domain.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..64  

sheErpDomainName 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.2
The associated name of the ERP Domain. Spaces and other special characters (: o) are not allowed!!
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sheErpDomainPrimaryPort 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.3
The sheBridgePortIndex of the sheBridgePortTable that represents the primary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid).
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortIndexOrInvalid  

sheErpDomainSecondaryPort 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.4
The sheBridgePortIndex of the sheBridgePortTable that represents the secondary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid).
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgePortIndexOrInvalid  

sheErpDomainWaitToRestoreTime 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.5
Time in seconds taken to verify that ring integrity is maintained before switch to Idle state after all links have recovered from Link Failure, Link Degrade or Loss of Test Packet. Range 2..720.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 2..720  

sheErpDomainTestPacketInterval 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.6
Time interval , in milliseconds, between consecutive transmission of test packets. The Test Packet Interval is used to define the time to initiate protection due to Loss of Test Packets, The value of Test Packet Interval is between 10 ms and 500 ms in 10 ms steps.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 10..500  

sheErpDomainLearningDisabledTime 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.7
Configures the time during which learning is disabled after a FDB flush. The learning is only disabled for the protected VLAN of the domain on the ERP ports. The value of the Learning Disabled Time is between 0 and 500 ms in steps of 10 ms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..500  

sheErpDomainProtectionActivation 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.8
Represents if ERP Protection activation is activated or deactivated (admin state). When the ERP domain is activated the ERP process will start running. All alarms/traps are cleared and the ERP protection state is reported as unknown. The domain will enter deactivated state. The ERP protection activation default value is deactivated. deny(0) - protection inactive permit(1) - protection active
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainOperatorRequest 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.9
Two operators requests are possible for one ERP domain. For Normal nodes operator requests are ignored. manualToSecondary(1) - Manual Switch to Secondary port - This command enables to swap the roles of primary and secondary port on the RM Node. clear(2) - Clear - This command disables a previous Manual Switch to Secondary port.
Status: current Access: read-only
OBJECT-TYPE    
  SheErpDomainOperatorRequestType  

sheErpDomainNodeMode 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.10
An ERP domain may operate in two modes. RM Node or Normal Node. The description of these two modes is included in ERP concept specification. Only one node per domain could be a rm node. normalNode(1) rmNode(2)
Status: current Access: read-only
OBJECT-TYPE    
  SheErpNodeType  

sheErpDomainControlVlan 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.11
Represents the VLAN ID sheVlanIndex of the control VLAN of the domain. The control VLAN may not be used in other domains as control VLAN or as protected VLAN. The control VLAN must be a VLAN with a high priority QoS profile.
Status: current Access: read-only
OBJECT-TYPE    
  SheVlanIdOrInvalid  

sheErpDomainNodeStatus 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.12
Reflects the domain node status. rmIdle(1) primaryProtecting(2) protecting(3) idle(4) failed-S(5) failed-P(6) preForward(7) isolated(8) deactivated(9) backoff(10)
Status: current Access: read-only
OBJECT-TYPE    
  SheErpDomainNodeStatusType  

sheErpDomainRingStatus 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.13
Actual protection state of the ERP domain on the ring. The following three states are defined: Normal - All ring nodes are available and used. Protecting - At least one Link on the ring is failed. Unknown - This state is used when the ERP protection is not activated, or when the Multiple Failures are detected in a Normal Node.
Status: current Access: read-only
OBJECT-TYPE    
  SheErpDomainRingStatusType  

sheErpDomainLotp 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.14
Erp domain Loss of Test Packet alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactive
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheErpDomainUlotp 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.15
Erp domain Unidirectional Detection of Loss of Test Packet alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactive
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheErpDomainMultipleRm 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.16
Erp domain Multiple Redundancy Manager alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactive
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheErpDomainRmReach 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.17
RM Node reacheability alarm status. Erp domain detection of mutiple failures in the ring cause the RM Node to become unreacheable to this normal node (only meaningful for normal nodes). true(1) - RM Node is unreacheable, alarm active false(2) - RM Node is reacheable, alarm inactive
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheErpDomainLotpTrapEnable 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.18
Erp domain Loss of Test Packet Trap. Configures sending OF LOTP traps when detected by the RM node. deny(0) permit(1)
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainUlotpTrapEnable 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.19
Erp domain Unidirectional Loss of Test Packet Trap. Configures sending of ULOTP traps when detected by the RM node. deny(0) permit(1)
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainMultipleRmTrapEnable 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.20
Erp domain multiple RM nodes Trap. Configures sending of MultipleRM traps when detected by the RM node. deny(0) permit(1)
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainRmReachTrapEnable 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.21
Erp domain multiple failures trap. Configures sending of RMNodeReacheablility traps when detected by the normal node. deny(0) permit(1)
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.4.9.2.1.1.22
Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per ERP domain.
Status: current Access: read-only
OBJECT-TYPE    
  SheAlarmSevProfileIndex  

sheErpDomainControl 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2
OBJECT IDENTIFIER    

sheErpDomainControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.1
A SetRequest on this attribute starts a command execution process in the NetElement. modifyErpDomainEntry(826) parameters: - sheErpDomainControlDomainIndex - sheErpDomainControlDomainName - sheErpDomainControlDomainPrimaryPort - sheErpDomainControlDomainSecondaryPort - sheErpDomainControlWaitToRestoreTime - sheErpDomainControlTestPacketInterval - sheErpDomainControlLearningDisabledTime - sheErpDomainControlDomainNodeMode - sheErpDomainControlDomainControlVlan - sheErpDomainControlLotpTrapEnable - sheErpDomainControlUlotpTrapEnable - sheErpDomainControlMultipleRmTrapEnable - sheErpDomainControlRmReachTrapEnable - sheErpDomainControlAlarmSeverityIndex activateErpDomain(827) - sheErpDomainControlDomainIndex - sheErpDomainControlProtectionActivation operatorRequestErpDomain(828) - sheErpDomainControlDomainIndex - sheErpDomainControlOperatorRequest
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheErpDomainControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheErpDomainControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheErpDomainControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.4
Command result (error code) attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheErpDomainControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.5
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheErpDomainControlDomainIndex 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.6
An index value that uniquely identifies an ERP domain. parameter for - modifyErpDomainEntry - modifyErpDomainTraps - activateErpDomain - operatorRequestErpDomain
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..64  

sheErpDomainControlDomainName 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.7
The associated name of the ERP Domain. Spaces and other special characters (: o) are not allowed!! parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sheErpDomainControlDomainPrimaryPort 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.8
The sheBridgePortIndex of the sheBridgePortTable that represents the primary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgePortIndexOrInvalid  

sheErpDomainControlDomainSecondaryPort 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.9
The sheBridgePortIndex of the sheBridgePortTable that represents the secondary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgePortIndexOrInvalid  

sheErpDomainControlWaitToRestoreTime 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.10
Time in seconds taken to verify that ring integrity is maintained before switch to Idle state after all links have recovered from Link Failure, Link Degrade or Loss of Test Packet. parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 2..720  

sheErpDomainControlTestPacketInterval 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.11
Time interval , in milliseconds, between consecutive transmission of test packets. The Test Packet Interval is used to define the time to initiate protection due to Loss of Test Packets, The value of Test Packet Interval is between 10 ms and 500 ms in 10 ms steps. parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..500  

sheErpDomainControlLearningDisabledTime 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.12
Configures the time during which learning is disabled after a FDB flush. The learning is only disabled for the protected VLAN of the domain on the ERP ports. The value of the Learning Disabled Time is between 0 and 500 ms in steps of 10 ms. parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..500  

sheErpDomainControlProtectionActivation 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.13
Represents if ERP Protection activation is activated or deactivated. When the ERP domain is activated the ERP process will start running. All alarms/traps are cleared and the ERP protection state is reported as unknown. The domain will enter deactivated state. The ERP protection activation default value is deactivated. deny(0) - protection inactive permit(1) - protection active parameter for - activateErpDomain
Status: current Access: read-write
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainControlOperatorRequest 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.14
Two operators requests are possible for one ERP domain. For Normal nodes operator requests are ignored. manualToSecondary(1) - Manual Switch to Secondary port - This command enables to swap the roles of primary and secondary port on the RM Node. clear(2) - Clear - This command disables a previous Manual Switch to Secondary port. parameter for - operatorRequestErpDomain
Status: current Access: read-write
OBJECT-TYPE    
  SheErpDomainOperatorRequestType  

sheErpDomainControlDomainNodeMode 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.15
An ERP domain may operate in two modes. RM Node or Normal Node. The description of these two modes is included in ERP concept specification. Only one node per domain could be a rm node. normalNode(1) rmNode(2) parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheErpNodeType  

sheErpDomainControlDomainControlVlan 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.16
Represents the VLAN ID sheVlanIndex of the control VLAN of the domain. The control VLAN may not be used in other domains as control VLAN or as protected VLAN. The control VLAN must be a VLAN with a high priority QoS profile. parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheVlanIdOrInvalid  

sheErpDomainControlLotpTrapEnable 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.17
Erp domain Loss of Test Packet Trap. Configures sending OF LOTP traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainControlUlotpTrapEnable 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.18
Erp domain Unidirectional Loss of Test Packet Trap. Configures sending of ULOTP traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainControlMultipleRmTrapEnable 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.19
Erp domain multiple RM nodes Trap. Configures sending of MultipleRM traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainControlRmReachTrapEnable 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.20
Erp domain multiple failures trap. Configures sending of RMNodeReacheablility traps when detected by the normal node. deny(0) permit(1) parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  ShePermissionType  

sheErpDomainControlAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.4.9.2.2.21
Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per ERP domain. parameter for - modifyErpDomainEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheAlarmSevProfileIndex  

sheErpDomainGlobalGroup 1.3.6.1.4.1.231.7.1.2.1.4.9.2.3
OBJECT IDENTIFIER    

sheErpDomainGlobalMacLearningDelay 1.3.6.1.4.1.231.7.1.2.1.4.9.2.3.1
Enable / disable the MAC learning delay globaly. Default: disable When this parameter is set to enable, ERP enhancement solution will be actived. ERP module will apply hardware MAC learning after FDB flush. if this parameter is set to disable, ERP module will work the same as before.
Status: current Access: read-only
OBJECT-TYPE    
  SheEnableType  

sheErpDomainGlobalMacLearningDelayTimer 1.3.6.1.4.1.231.7.1.2.1.4.9.2.3.2
Configure the MAC learning delay time. Value range: 10~to be defined, the increasement granularity is 10 ms default: to be defined. This parameter specify how long the hardware MAC learning will last in condition that sheErpDomainMacLearningDelay is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheErpDomainGlobalControl 1.3.6.1.4.1.231.7.1.2.1.4.9.2.4
OBJECT IDENTIFIER    

sheErpDomainGlobalControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.9.2.4.1
A SetRequest on this attribute starts a command execution process in the NetElement. modifyErpDomainGlobalGroup(829) parameters: sheErpDomainGlobalMacLearningDelay sheErpDomainGolobalMacLearningDelayTimer
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheErpDomainGlobalControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.9.2.4.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheErpDomainGlobalControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.9.2.4.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheErpDomainGlobalControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.9.2.4.4
Command result (error code) attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheErpDomainGlobalControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.9.2.4.5
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheErpDomainGlobalControlMacLearningDelay 1.3.6.1.4.1.231.7.1.2.1.4.9.2.4.6
Enable / disable the MAC learning delay globaly.
Status: current Access: read-write
OBJECT-TYPE    
  SheEnableType  

sheErpDomainGlobalControlMacLearningDelayTimer 1.3.6.1.4.1.231.7.1.2.1.4.9.2.4.7
Configure the MAC learning delay time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheErpNotifications 1.3.6.1.4.1.231.7.1.2.1.4.9.3
OBJECT IDENTIFIER    

sheErpEvents 1.3.6.1.4.1.231.7.1.2.1.4.9.3.1
OBJECT IDENTIFIER    

sheErpDomainRingStatusChange 1.3.6.1.4.1.231.7.1.2.1.4.9.3.1.1
This trap is set whenever there is a change in the erpDomainRingStatus.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpDomainNodeStatusChange 1.3.6.1.4.1.231.7.1.2.1.4.9.3.1.2
This trap is set whenever there is a change in the erpDomainNodeStatus.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpDomainTrafficVlanModified 1.3.6.1.4.1.231.7.1.2.1.4.9.3.1.3
Mapping of ERP domains to traffic VLANs modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpDomainEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.9.3.1.4
ERP domain entry modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpDomainProtectionModified 1.3.6.1.4.1.231.7.1.2.1.4.9.3.1.5
The ERP domain activation has been modified by the operator.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpDomainManualSwitch 1.3.6.1.4.1.231.7.1.2.1.4.9.3.1.6
The ERP domain RM node port swap has been modified by the operator.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpDomainGlobalGroupModified 1.3.6.1.4.1.231.7.1.2.1.4.9.3.1.7
Modify global parameters of ERP domain.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpAlarms 1.3.6.1.4.1.231.7.1.2.1.4.9.3.2
OBJECT IDENTIFIER    

sheErpDomainLotpAlmTrap 1.3.6.1.4.1.231.7.1.2.1.4.9.3.2.1
Loss of TestPackets state change trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpDomainUlotpAlmTrap 1.3.6.1.4.1.231.7.1.2.1.4.9.3.2.2
Unidirectional Loss of TestPackets state change trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpDomainMultipleRmAlmTrap 1.3.6.1.4.1.231.7.1.2.1.4.9.3.2.3
Multiple RM state change trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpDomainRmReachAlmTrap 1.3.6.1.4.1.231.7.1.2.1.4.9.3.2.4
Rm Node Unreacheable state change trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheErpConformance 1.3.6.1.4.1.231.7.1.2.1.4.9.100
OBJECT IDENTIFIER    

sheErpCompliances 1.3.6.1.4.1.231.7.1.2.1.4.9.100.1
OBJECT IDENTIFIER    

sheErpCompliance 1.3.6.1.4.1.231.7.1.2.1.4.9.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheErpGroups 1.3.6.1.4.1.231.7.1.2.1.4.9.100.2
OBJECT IDENTIFIER    

sheErpBaseGroup 1.3.6.1.4.1.231.7.1.2.1.4.9.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheErpBaseControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.9.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheErpDomainGroup 1.3.6.1.4.1.231.7.1.2.1.4.9.100.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheErpDomainControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.9.100.2.4
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheErpNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.9.100.2.5
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheBcsc 1.3.6.1.4.1.231.7.1.2.1.4.10
OBJECT IDENTIFIER    

sheBcscTable 1.3.6.1.4.1.231.7.1.2.1.4.10.1
This table has one entry for each combination of port or vlan and traffic type where broadcast storm control has to be performed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheBcscEntry

sheBcscEntry 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1
Specifies per port or vlan and per traffic type the broadcast storm control parameters, i.e. how many packets/bits per second can be received.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheBcscEntry  

sheBcscIndex 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1.1
Primary key for the table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheBcscType 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1.2
Broadcast storm control traffic type. 1 - Broadcast 2 - Multicast 3 - Destination Lookup Failure (unicast)
Status: current Access: read-only
OBJECT-TYPE    
  SheBcscTrafficType  

sheBcscConfigScope 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1.3
Type of the controlled entity, defines the meaning of sheBcscConfigIndex. 1 - port 2 - vlan
Status: current Access: read-only
OBJECT-TYPE    
  SheBcscScopeType  

sheBcscConfigIndex 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1.4
Index of the controlled entity. In case of port scope, it should be sheBridgePortIndex of the sheBridgePortTable and the allowed range is 1-65535. In case of vlan scope, it should be sheVlanIndex of the sheVlanTable and the allowed range is 1-4093.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheBcscThresholdType 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1.5
Defines the counter type, i.e. the meaning of the sheBcscThresholdValue. 1 - packets per second 2 - bytes per second
Status: current Access: read-only
OBJECT-TYPE    
  SheBcscThresholdType  

sheBcscThresholdValue 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1.6
Maximum traffic amount of type sheBcscThresholdType. If the threshold of a traffic type is reached within the 1 second measuring interval, further traffic of that type is dropped during the next time period. The switch continues to monitor traffic on the port, and when the utilization level is below the threshold level, the type of traffic that was dropped is forwarded again during the next time period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBcscVendorSpecific 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1.7
For some vendors, multicast address can be specified.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

sheBcscAlarmDebounceTimer 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1.8
The minimum time between two alarm traps sent by the BSCS instance.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBcscAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.4.10.1.1.9
Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per BSCS instance.
Status: current Access: read-only
OBJECT-TYPE    
  SheAlarmSevProfileIndex  

sheBcscControl 1.3.6.1.4.1.231.7.1.2.1.4.10.2
OBJECT IDENTIFIER    

sheBcscControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.10.2.1
A SetRequest on this attribute starts a command execution process in the NetElement. 501 - createBcscEntry parameters: sheBcscControlType sheBcscControlConfigScope sheBcscControlConfigIndex sheBcscControlThresholdType sheBcscControlThresholdValue sheBcscControlVendorSpecific sheBcscControlAlarmDebounceTimer sheBcscControlAlarmSeverityIndex 502 - modifyBcscEntry parameters: sheBcscControlIndex sheBcscControlType sheBcscControlThresholdType sheBcscControlThresholdValue sheBcscControlVendorSpecific sheBcscControlAlarmDebounceTimer sheBcscControlAlarmSeverityIndex 503 - deleteBcscEntry parameters: sheBcscControlIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheBcscControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.10.2.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheBcscControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.10.2.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBcscControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.10.2.4
Command result (error code) attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheBcscControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.10.2.5
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheBcscControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.10.2.6
Primary key for the table, created by the NE. Parameter for 502 - modifyBcscEntry 503 - deleteBcscEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheBcscControlType 1.3.6.1.4.1.231.7.1.2.1.4.10.2.7
Broadcast storm control traffic type. 1 - Broadcast 2 - Multicast 3 - Destination Lookup Failure (unicast) Parameter for 501 - createBcscEntry 502 - modifyBcscEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheBcscTrafficType  

sheBcscControlConfigScope 1.3.6.1.4.1.231.7.1.2.1.4.10.2.8
Type of the controlled entity, defines the meaning of sheBcscConfigIndex. 1 - port 2 - vlan Parameter for 501 - createBcscEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheBcscScopeType  

sheBcscControlConfigIndex 1.3.6.1.4.1.231.7.1.2.1.4.10.2.9
Index of the controlled entity. In case of port scope, it should be sheBridgePortIndex of the sheBridgePortTable and the allowed range is 1-65535. In case of vlan scope, it should be sheVlanIndex of the sheVlanTable and the allowed range is 1-4093. Parameter for 501 - createBcscEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

sheBcscControlThresholdType 1.3.6.1.4.1.231.7.1.2.1.4.10.2.10
Defines the counter type, i.e. the meaning of the sheBcscThresholdValue. 1 - packets per second 2 - bytes per second Parameter for 501 - createBcscEntry 502 - modifyBcscEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheBcscThresholdType  

sheBcscControlThresholdValue 1.3.6.1.4.1.231.7.1.2.1.4.10.2.11
Maximum traffic amount of type sheBcscThresholdType. If the threshold of a traffic type is reached within the 1 second measuring interval, further traffic of that type is dropped during the next time period. The switch continues to monitor traffic on the port, and when the utilization level is below the threshold level, the type of traffic that was dropped is forwarded again during the next time period. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheBcscControlVendorSpecific 1.3.6.1.4.1.231.7.1.2.1.4.10.2.12
For some vendors, multicast address can be specified. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

sheBcscControlAlarmDebounceTimer 1.3.6.1.4.1.231.7.1.2.1.4.10.2.13
The minimum time between two alarm traps sent by the BSCS instance. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheBcscControlAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.4.10.2.14
Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per BSCS instance. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheBcscNotifications 1.3.6.1.4.1.231.7.1.2.1.4.10.3
OBJECT IDENTIFIER    

sheBcscEvents 1.3.6.1.4.1.231.7.1.2.1.4.10.3.1
OBJECT IDENTIFIER    

sheBcscEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.10.3.1.1
New entry in the sheBcscTable has been created.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBcscEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.10.3.1.2
Existing entry in the sheBcscTable has been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBcscEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.10.3.1.3
Entry in the sheBcscTable has been deleted.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBcscAlarms 1.3.6.1.4.1.231.7.1.2.1.4.10.3.2
OBJECT IDENTIFIER    

sheBcscThresholdExceeded 1.3.6.1.4.1.231.7.1.2.1.4.10.3.2.1
Maximum traffic amount has reached threshold within the 1 second measuring interval, further traffic of that type is dropped during the next time period.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheBcscConformance 1.3.6.1.4.1.231.7.1.2.1.4.10.100
OBJECT IDENTIFIER    

sheBcscCompliances 1.3.6.1.4.1.231.7.1.2.1.4.10.100.1
OBJECT IDENTIFIER    

sheBcscCompliance 1.3.6.1.4.1.231.7.1.2.1.4.10.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheBcscGroups 1.3.6.1.4.1.231.7.1.2.1.4.10.100.2
OBJECT IDENTIFIER    

sheBcscGroup 1.3.6.1.4.1.231.7.1.2.1.4.10.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBcscControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.10.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheBcscNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.10.100.2.3
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheMstpConfig 1.3.6.1.4.1.231.7.1.2.1.4.11
OBJECT IDENTIFIER    

sheMstpBase 1.3.6.1.4.1.231.7.1.2.1.4.11.1
OBJECT IDENTIFIER    

sheMstpBaseParam 1.3.6.1.4.1.231.7.1.2.1.4.11.1.1
OBJECT IDENTIFIER    

sheMstpBaseStatus 1.3.6.1.4.1.231.7.1.2.1.4.11.1.1.1
Enable or disable spanning tree.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheMstpBaseConfName 1.3.6.1.4.1.231.7.1.2.1.4.11.1.1.2
The MST configuration determines to which MST region Spaces and other special characters (: o) are not allowed!! each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheMstpBaseRevisionLevel 1.3.6.1.4.1.231.7.1.2.1.4.11.1.1.3
The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The range of the revision number is 0 to 65535.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

sheMstpBaseConfIdVlanIdList 1.3.6.1.4.1.231.7.1.2.1.4.11.1.1.4
The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The sheMstpBridgeProtoParamTable holds 32 static profile entries of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. This octet String with 4096 octets maps VLANs to spanning tree protocol profiles: one octet containing the sheMstpBridgeProtoParamIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one spanning-tree instance at a time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4096)  

sheMstpBaseControl 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2
OBJECT IDENTIFIER    

sheMstpBaseControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2.1
A SetRequest on this attribute starts a command execution process in the NetElement. - modifyMstpBaseStatus parameters: sheMstpBaseControlBaseStatus - modifyMstpBaseConfig parameters: sheMstpBaseControlConfName sheMstpBaseControlRevisionLevel - modifyMstpBaseConfIdVlanIdList parameters: sheMstpBaseControlConfIdVlanIdList
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheMstpBaseControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheMstpBaseControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpBaseControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2.4
Command result (error code) attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheMstpBaseControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2.5
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpBaseControlBaseStatus 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2.6
Enable or disable spanning tree. parameter of - modifyMstpBaseStatus
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheMstpBaseControlConfName 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2.7
The MST configuration determines to which MST region Spaces and other special characters (: o) are not allowed!! each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. parameter of - modifyMstpBaseConfig
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheMstpBaseControlRevisionLevel 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2.8
The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The range of the revision number is 0 to 65535. parameter of - modifyMstpBaseConfig
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

sheMstpBaseControlConfIdVlanIdList 1.3.6.1.4.1.231.7.1.2.1.4.11.1.2.9
The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The sheMstpBridgeProtoParamTable holds 32 static profile entries of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. This octet String with 4096 octets maps VLANs to spanning tree protocol profiles: one octet containing the sheMstpBridgeProtoParamIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one spanning-tree instance at a time. parameter of - modifyMstpBaseConfIdVlanIdList
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4096)  

sheMstp 1.3.6.1.4.1.231.7.1.2.1.4.11.2
OBJECT IDENTIFIER    

sheMstpBridgeProtoParamTable 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1
One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheMstpBridgeProtoParamEntry

sheMstpBridgeProtoParamEntry 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1
One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries. Note that each MST region can only support up to 16 spanning-tree instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheMstpBridgeProtoParamEntry  

sheMstpBridgeProtoParamIndex 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1.1
The primary key for the table. One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..32  

sheMstpBridgeProtoParamBridgeId 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1.2
Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheMstpBridgeProtoParamBridgePriority 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1.3
Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. The configured value for the MstpBridgeProtoParamPriority should be completed by a fixed offsett, depending on the Mstp-Instance ID. That means, a configured priority-value of 4097 is valid for Mstp instance 1. Instance 2 will use 4098 in that case and instance 32 will have a MstpBridgeProtoParamPriority of 4128. Default value should be 32769 for MSTP-Instance 1 and 32800 for instance 32.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..61472  

sheMstpBridgeProtoParamTcTime 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1.4
The time since the last topology change.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheMstpBridgeProtoParamTcCount 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1.5
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheMstpBridgeProtoParamTc 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1.6
A topology change has been detected.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheMstpBridgeProtoParamDesignatedRoot 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1.7
One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheMstpBridgeProtoParamRootPort 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1.8
A root port is selected for each switch (except the root switch). This port provides the best path (lowest cost) when the switch forwards packets to the root switch. The designated port to the root bridge, identified by the sheBridgePortIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpBridgeProtoParamRootPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.2.1.1.9
The shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpPortParamTable 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2
The table holds the MSTP parameters on a per-port basis. The first key is a pointer to the MSTP profile equal to sheMstpBridgeProtoParamIndex (32 static entries). The second key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheMstpPortParamEntry

sheMstpPortParamEntry 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1
The table holds the MSTP parameters on a per-port basis. A free running index is used as key. There is a pointer to the MSTP profile equal to sheMstpBridgeProtoParamIndex (32 static entries). There is a seconde pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheMstpPortParamEntry  

sheMstpPortParamTableIndex 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.1
A free running simple table index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..256  

sheMstpPortParamProtoIndex 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.2
The MSTP profile, the table entry is related to, is the first key of the table. This object points to the sheMstpBridgeProtoParamTable (same as sheMstpBridgeProtoParamIndex).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..32  

sheMstpPortParamPortIndex 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.3
The port, the table entry is related to, is the second key of the table. This object points to the sheBridgePortTable (same as sheBridgePortIndex).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpPortParamUpTime 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.4
The total time the port was in the forwarding state since the management entity was last reset or initialized.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheMstpPortParamState 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.5
Each Layer 2 interface on a switch using spanning tree exists in one of these states: Blocking: The interface does not participate in frame forwarding. Listening: The first transitional state after the blocking state when the spanning tree determines that the interface should participate in frame forwarding. Learning: The interface prepares to participate in frame forwarding. Forwarding: The interface forwards frames. Disabled: The interface is not participating in spanning tree because of a shutdown port, no link on the port, or no spanning-tree instance running on the port.
Status: current Access: read-only
OBJECT-TYPE    
  SheMstpPortParamStateType  

sheMstpPortParamPortId 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.6
The parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of the Port by real-world equipment; this part assures the uniqueness of the Port Identifier among the Ports of a single Bridge, and is a small integer assigned by the NE in the range from one upwards. The other part of the parameter allows adjustment of the priority of the Port and is taken as the more significant part in priority comparisons. The priority part of this parameter can be updated by management.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

sheMstpPortParamPortPriority 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.7
When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..240  

sheMstpPortParamAdminPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.8
When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 0 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..200000000  

sheMstpPortParamDesignatedRoot 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.9
One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheMstpPortParamDesignatedBridge 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.10
A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheMstpPortParamDesignatedPort 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.11
The port identifier of the port that transmitted a BPDU to me.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

sheMstpPortParamDesignatedCost 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.12
A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Costs for the designated path to the designated switch.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpPortParamPortRole 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.13
The RSTP provides rapid convergence of the spanning tree by assigning one of these port roles to individual ports and by determining the active topology. Root port Provides the best path (lowest cost) when the switch forwards packets to the root switch. Designated port Connects to the designated switch, which incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Alternate port Offers an alternate path toward the root switch to that provided by the current root port. Backup port Acts as a backup for the path provided by a designated port toward the leaves of the spanning tree. A backup port can exist only when two ports are connected together in a loopback by a point-to-point link or when a switch has two or more connections to a shared LAN segment. Disabled port Has no role within the operation of the spanning tree. A port with the root or a designated port role is included in the active topology. A port with the alternate or backup port role is excluded from the active topology.
Status: current Access: read-only
OBJECT-TYPE    
  SheMstpPortParamPortRoleType  

sheMstpPortParamCurrentPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.2.2.1.14
These value represent the current pathcost value for this port.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..200000000  

sheMstpControl 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3
OBJECT IDENTIFIER    

sheMstpControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.1
A SetRequest on this attribute starts a command execution process in the NetElement. sheMstpBridgeProtoParamTable - resetMstpTc parameters: sheMstpControlBridgeProtoParamIndex - modifyMstpBridgeParamEntry parameters: sheMstpControlBridgeProtoParamIndex sheMstpControlBridgeProtoParamBridgePriority sheMstpPortParamTable - modifyMstpPortParamEntry parameters: sheMstpControlPortParamTableIndex sheMstpControlPortParamPortPriority sheMstpControlPortParamAdminPathCost
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheMstpControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheMstpControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.4
Command result (error code) attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheMstpControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.5
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpControlBridgeProtoParamIndex 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.6
Selects a table entry that holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. Parameter for - resetMstpTc - modifyMstpBridgeParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheMstpControlBridgeProtoParamBridgePriority 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.7
Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. Parameter for - modifyMstpBridgeParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheMstpControlPortParamTableIndex 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.8
A free running simple table index.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..256  

sheMstpControlPortParamPortPriority 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.9
When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. parameter for - modifyMstpPortParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..240  

sheMstpControlPortParamAdminPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.2.3.10
When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 0 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. parameter for - modifyMstpPortParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..200000000  

sheCist 1.3.6.1.4.1.231.7.1.2.1.4.11.3
OBJECT IDENTIFIER    

sheCistBridgeProtoParam 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1
OBJECT IDENTIFIER    

sheCistBridgeProtoParamBridgeId 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.1
Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheCistBridgeProtoParamBridgePriority 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.2
Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..61440  

sheCistBridgeProtoParamTcTime 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.3
The time since the last topology change.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheCistBridgeProtoParamTcCount 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.4
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sheCistBridgeProtoParamTc 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.5
A topology change has been detected.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCistBridgeProtoParamDesignatedRoot 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.6
One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheCistBridgeProtoParamRootPort 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.7
A root port is selected for each switch (except the root switch). This port provides the best path (lowest cost) when the switch forwards packets to the root switch. The designated port to the root bridge, identified by the sheBridgePortIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCistBridgeProtoParamRootPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.8
The shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCistBridgeProtoParamMaxAge 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.9
The maximum age of spanning tree protocol information learned from the network on any port before it is discarded (time a bridge port saves its configuration BPDU information), in units of hundredths of a second. This is the actual value that this bridge is currently using. This is 20 seconds by default and can be tuned to be between six and 40 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 600..4000  

sheCistBridgeProtoParamHoldTime 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCistBridgeProtoParamForwardDelay 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.11
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] This is by default equal to 15 seconds, but can be tuned to be between four and 30 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 400..3000  

sheCistBridgeProtoParamBridgeMaxAge 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.12
The value that all bridges use for MaxAge when this bridge is acting as the root in units of hundredths of a second. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 600..4000  

sheCistBridgeProtoParamBridgeHelloTime 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.13
The value that all bridges use for HelloTime when this bridge is acting as the root in units of hundredths of a second. The hello time is the time between each Bridge Protocol Data Unit (BPDU) that is sent on a port. This is equal to two seconds by default, but can be tuned to be between one and ten seconds. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 100..1000  

sheCistBridgeProtoParamBridgeForwardDelay 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.14
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of BridgeMaxAge. This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. This is by default equal to 15 seconds, but can be tuned to be between four and 30 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 400..3000  

sheCistBridgeProtoParamForceVer 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.15
When RSTP is configuring or reconfiguring the network, there is an increased and implementation dependent probability that frames that are in transit will be misordered or duplicated as network paths change, since a Bridge can buffer frames awaiting transmission through its Ports. Some LAN protocols, for example, LLC Type 2, are particularly sensitive to frame misordering and duplication; to support these the Force Protocol Version parameter can be used to delay the transition of ports to a Forwarding state and further reduce the probability of such events. The Force Protocol Version parameter for the Bridge can take the value 0 (STP Compatibility mode),2 (the default, normal operation) or 3 (MSTP Compatibility).
Status: current Access: read-only
OBJECT-TYPE    
  SheCistBridgeProtoParamForceVerType  

sheCistBridgeProtoParamRegionalRootId 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.16
One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheCistBridgeProtoParamRegionalRootPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.17
The shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCistBridgeProtoParamMaxHops 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.18
Number of possible hops in the region. Only used if forcedVersion = mstp(3).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..40  

sheCistBridgeProtoParamSelfLoopDetect 1.3.6.1.4.1.231.7.1.2.1.4.11.3.1.19
Enable/Disable the stp self loop detection.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCistPortParamTable 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3
The table holds the CIST parameters on a per-port basis. The key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheCistPortParamEntry

sheCistPortParamEntry 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1
The table holds the CIST parameters on a per-port basis. The key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheCistPortParamEntry  

sheCistPortParamIndex 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.1
That is the sheBridgePortIndex of the corresponding BridgePort.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheCistPortParamUpTime 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.2
The total time the port was in the forwarding state since the management entity was last reset or initialized.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheCistPortParamState 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.3
Each Layer 2 interface on a switch using spanning tree exists in one of these states: Blocking: The interface does not participate in frame forwarding. Listening: The first transitional state after the blocking state when the spanning tree determines that the interface should participate in frame forwarding. Learning: The interface prepares to participate in frame forwarding. Forwarding: The interface forwards frames. Disabled: The interface is not participating in spanning tree because of a shutdown port, no link on the port, or no spanning-tree instance running on the port.
Status: current Access: read-only
OBJECT-TYPE    
  SheMstpPortParamStateType  

sheCistPortParamPortId 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.4
The parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of the Port by real-world equipment; this part assures the uniqueness of the Port Identifier among the Ports of a single Bridge, and is a small integer assigned by the NE in the range from one upwards. The other part of the parameter allows adjustment of the priority of the Port and is taken as the more significant part in priority comparisons. The priority part of this parameter can be updated by management.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

sheCistPortParamPortPriority 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.5
When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..240  

sheCistPortParamAdminPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.6
When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 1 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..200000000  

sheCistPortParamDesignatedRoot 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.7
One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheCistPortParamDesignatedCost 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.8
A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Costs for the designated path to the designated switch.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCistPortParamDesignatedBridge 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.9
A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheCistPortParamDesignatedPort 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.10
The port identifier of the port that transmitted a BPDU to me.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

sheCistPortParamTcAck 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.11
A boolean. Set if a Configuration Message with a topology change acknowledge flag set is to be transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCistPortParamAdminEdgePort 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.12
Port can be configured to be an edge port.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCistPortParamOperEdgePort 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.13
If port is configured to be an edge port, in the absence of a received BPDU, this port is identified as an operEdgePort.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCistPortParamMacEnabled 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.14
The value of this parameter is TRUE if use of the MAC entity is permitted; and is otherwise FALSE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCistPortParamMacOperational 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.15
The value of this parameter is TRUE if the MAC entity is in a functioning state; i.e., the MAC entity can be used to transmit and/or receive frames, and its use is permitted by management. Its value is otherwise FALSE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCistPortParamAdminPointToPointMac 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.16
This parameter can take three values: a) ForceTrue. The administrator requires the MAC to be treated as if it is connected to a point-to-point LAN. b) ForceFalse. The administrator requires the MAC to be treated as connected to a non-point-to-point LAN. c) Auto. The administrator requires the point-to-point status of the MAC to be determined by specific MAC procedures.
Status: current Access: read-only
OBJECT-TYPE    
  SheCistAdminPTPMacType  

sheCistPortParamOperPointToPointMac 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.17
TRUE, if the MAC is connected to a point-to-point LAN, otherwise FALSE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCistPortParamRegionalRootId 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.18
The CIST Regional Root is the bridge of this region that has the lowest External Root Path Cost through a Boundary Port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

sheCistPortParamRegionalRootPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.19
Path cost to the CIST Regional Root, the bridge of this region that has the lowest External Root Path Cost through a Boundary Port.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCistPortParamPortHelloTime 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.20
The hello time actual used by that port.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 100..1000  

sheCistPortParamHelloTime 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.21
The time interval between the generation of Configuration BPDUs by the Root.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 100..1000  

sheCistPortParamPortRole 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.22
The RSTP provides rapid convergence of the spanning tree by assigning one of these port roles to individual ports and by determining the active topology. Root port Provides the best path (lowest cost) when the switch forwards packets to the root switch. Designated port Connects to the designated switch, which incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Alternate port Offers an alternate path toward the root switch to that provided by the current root port. Backup port Acts as a backup for the path provided by a designated port toward the leaves of the spanning tree. A backup port can exist only when two ports are connected together in a loopback by a point-to-point link or when a switch has two or more connections to a shared LAN segment. Disabled port Has no role within the operation of the spanning tree. A port with the root or a designated port role is included in the active topology. A port with the alternate or backup port role is excluded from the active topology.
Status: current Access: read-only
OBJECT-TYPE    
  SheMstpPortParamPortRoleType  

sheCistPortParamCurrentPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.23
The current path cost
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..200000000  

sheCistPortParamLoopDetect 1.3.6.1.4.1.231.7.1.2.1.4.11.3.3.1.24
The current loop detect state. Note: Only supported by hix5608 R1.3!!
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCistControl 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4
OBJECT IDENTIFIER    

sheCistControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.1
A SetRequest on this attribute starts a command execution process in the NetElement. sheCistBridgeProtoParam - resetCistTc parameters: 'no' - modifyCistBridgeParameters parameters: sheCistControlBridgeProtoParamBridgePriority sheCistControlBridgeProtoParamBridgeMaxAge sheCistControlBridgeProtoParamBridgeHelloTime sheCistControlBridgeProtoParamBridgeForwardDelay sheCistControlBridgeProtoParamForceVer sheCistControlBridgeProtoParamMaxHops sheCistControlBridgeProtoParamSelfLoopDetect sheCistPortParamTable - modifyCistPortParamEntry parameters: sheCistControlPortParamIndex sheCistControlPortParamPortPriority sheCistControlPortParamAdminPathCost sheCistControlPortParamAdminEdgePort sheCistControlPortParamMacEnabled sheCistControlPortParamAdminPointToPointMac
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheCistControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheCistControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCistControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.4
Command result (error code) attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheCistControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.5
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCistControlBridgeProtoParamBridgePriority 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.6
Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. parameter for - modifyCistBridgeParameters
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..61440  

sheCistControlBridgeProtoParamBridgeMaxAge 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.7
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParameters
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 600..4000  

sheCistControlBridgeProtoParamBridgeHelloTime 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.8
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParameters
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 100..1000  

sheCistControlBridgeProtoParamBridgeForwardDelay 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.9
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParameters
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 400..3000  

sheCistControlBridgeProtoParamForceVer 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.10
When RSTP is configuring or reconfiguring the network, there is an increased and implementation dependent probability that frames that are in transit will be misordered or duplicated as network paths change, since a Bridge can buffer frames awaiting transmission through its Ports. Some LAN protocols, for example, LLC Type 2, are particularly sensitive to frame misordering and duplication; to support these the Force Protocol Version parameter can be used to delay the transition of ports to a Forwarding state and further reduce the probability of such events. The Force Protocol Version parameter for the Bridge can take the value 0 (STP Compatibility mode),2 (the default, normal operation). Third version is Mstp compatibility.
Status: current Access: read-write
OBJECT-TYPE    
  SheCistBridgeProtoParamForceVerType  

sheCistControlBridgeProtoParamMaxHops 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.11
Number of possible hops in the region. Only used if forcedVersion = mstp(3).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..40  

sheCistControlBridgeProtoParamSelfLoopDetect 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.12
Enable/Disable the stp self loop detection.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheCistControlPortParamIndex 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.13
Index of the sheCistPortParamTable entry to be modified. parameter for - modifyCistPortParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

sheCistControlPortParamPortPriority 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.14
When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. parameter for - modifyCistPortParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..240  

sheCistControlPortParamAdminPathCost 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.15
When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 1 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. parameter for - modifyCistPortParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..200000000  

sheCistControlPortParamAdminEdgePort 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.16
Port can be configured to be an edge port. parameter for - modifyCistPortParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheCistControlPortParamMacEnabled 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.17
The value of this parameter is TRUE if use of the MAC entity is permitted; and is otherwise FALSE. parameter for - modifyCistPortParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheCistControlPortParamAdminPointToPointMac 1.3.6.1.4.1.231.7.1.2.1.4.11.3.4.18
This parameter can take three values: a) ForceTrue. The administrator requires the MAC to be treated as if it is connected to a point-to-point LAN. b) ForceFalse. The administrator requires the MAC to be treated as connected to a non-point-to-point LAN. c) Auto. The administrator requires the point-to-point status of the MAC to be determined by specific MAC procedures. parameter for - modifyCistPortParamEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheCistAdminPTPMacType  

sheMstpNotifications 1.3.6.1.4.1.231.7.1.2.1.4.11.4
OBJECT IDENTIFIER    

sheMstpBaseConfigModified 1.3.6.1.4.1.231.7.1.2.1.4.11.4.1
MSTP base parameters has been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMstpBaseConfIdVlanIdListModified 1.3.6.1.4.1.231.7.1.2.1.4.11.4.2
MSTP instance to VLAN ID mapping has been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMstpBridgeTcReset 1.3.6.1.4.1.231.7.1.2.1.4.11.4.3
Mstp topology change detection flag has been reset.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMstpBridgeParamEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.11.4.4
Mstp bridge parameter entry has been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMstpPortParamEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.11.4.5
Mstp port parameter entry has been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCistBridgeTcReset 1.3.6.1.4.1.231.7.1.2.1.4.11.4.6
Cist topology change detection flag has been reset.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCistBridgeParamModified 1.3.6.1.4.1.231.7.1.2.1.4.11.4.7
Cist bridge parameters have been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCistPortParamEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.11.4.8
Cist port parameter entry has been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMstpPortBridgeGroupAddressChanged 1.3.6.1.4.1.231.7.1.2.1.4.11.4.9
MSTP's bridge group address has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMstpBaseConfigReqResultTrap 1.3.6.1.4.1.231.7.1.2.1.4.11.4.10
Configuration end trap for long running commands.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMstpControlReqResultTrap 1.3.6.1.4.1.231.7.1.2.1.4.11.4.11
Configuration end trap for long running commands. Index parameters are used according controlrequest value - otherwise don't care.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCistControlReqResultTrap 1.3.6.1.4.1.231.7.1.2.1.4.11.4.12
Configuration end trap for long running commands. Index parameters are used according controlrequest value - otherwise don't care.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMstpPort 1.3.6.1.4.1.231.7.1.2.1.4.11.6
OBJECT IDENTIFIER    

sheMstpPortTable 1.3.6.1.4.1.231.7.1.2.1.4.11.6.1
The sheMstpPortTable holds a parameter related to overall MSTP protocol such as Bridge Group Address per port. The key is a pointer to the port equal to sheBridgePortIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheMstpPortEntry

sheMstpPortEntry 1.3.6.1.4.1.231.7.1.2.1.4.11.6.1.1
Entry of the sheMstpPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheMstpPortEntry  

sheMstpPortBridgeGroupAddress 1.3.6.1.4.1.231.7.1.2.1.4.11.6.1.1.1
MSTP bridge group Address to be used for the port.
Status: current Access: read-only
OBJECT-TYPE    
  SheMstpPortControlBridgeGroupAddress  

sheMstpPortControl 1.3.6.1.4.1.231.7.1.2.1.4.11.6.2
OBJECT IDENTIFIER    

sheMstpPortControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.11.6.2.1
setMstpPortBridgeGroupAddress : sheMstpPortControlPortIndex sheMstpPortControlBridgeGroupAddress
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheMstpPortControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.11.6.2.2
The status of a control request
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheMstpPortControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.11.6.2.3
The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpPortControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.11.6.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheMstpPortControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.11.6.2.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMstpPortControlPortIndex 1.3.6.1.4.1.231.7.1.2.1.4.11.6.2.6
This object points to the sheBridgePortTable (same as sheBridgePortIndex).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheMstpPortControlBridgeGroupAddress 1.3.6.1.4.1.231.7.1.2.1.4.11.6.2.7
MSTP bridge group address to be used for the port.
Status: current Access: read-write
OBJECT-TYPE    
  SheMstpPortControlBridgeGroupAddress  

sheMstpConformance 1.3.6.1.4.1.231.7.1.2.1.4.11.100
OBJECT IDENTIFIER    

sheMstpCompliances 1.3.6.1.4.1.231.7.1.2.1.4.11.100.1
OBJECT IDENTIFIER    

sheMstpCompliance 1.3.6.1.4.1.231.7.1.2.1.4.11.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheMstpGroups 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2
OBJECT IDENTIFIER    

sheMstpBaseParamGroup 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheMstpBaseControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheMstpBridgeParamGroup 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheMstpPortParamGroup 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2.4
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheMstpControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2.5
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheCistBridgeParamGroup 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2.6
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheCistPortParamGroup 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2.7
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheCistControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2.8
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheMstpNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.11.100.2.9
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheArp 1.3.6.1.4.1.231.7.1.2.1.4.12
OBJECT IDENTIFIER    

sheArpBase 1.3.6.1.4.1.231.7.1.2.1.4.12.1
OBJECT IDENTIFIER    

sheArpBroadcastFloodPermission 1.3.6.1.4.1.231.7.1.2.1.4.12.1.1
That is the so called China-Bit. ARP request broadcast messages received at the network interface (downstream) are either sent to each subscriber (flooding) or instead are dropped and answered by the NE itself through an ARP reply agent. Default is flooding permitted. deny (0) permit (1)
Status: current Access: read-only
OBJECT-TYPE    
  ShePermissionType  

sheArpControl 1.3.6.1.4.1.231.7.1.2.1.4.12.2
OBJECT IDENTIFIER    

sheArpControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.12.2.1
A SetRequest on this attribute starts a command execution process in the NetElement. 801 - changeArpHandling parameters: sheArpControlBroadcastFloodPermission
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheArpControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.12.2.2
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheArpControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.12.2.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheArpControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.12.2.4
Command result (error code) attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheArpControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.12.2.5
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheArpControlBroadcastFloodPermission 1.3.6.1.4.1.231.7.1.2.1.4.12.2.6
That is the so called China-Bit. ARP request broadcast messages received at the network interface (downstream) are either sent to each subscriber (flooding) or instead are dropped and answered by the NE itself through an ARP reply agent. Default is flooding permitted. deny (0) permit (1) Parameter for 801 - changeArpHandling
Status: current Access: read-write
OBJECT-TYPE    
  ShePermissionType  

sheArpNotifications 1.3.6.1.4.1.231.7.1.2.1.4.12.3
OBJECT IDENTIFIER    

sheArpBroadcastFloodPermissionModified 1.3.6.1.4.1.231.7.1.2.1.4.12.3.2
sheArpControlFloodPermission has been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheArpFixedIpAddressTableEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.12.3.3
sheArpFixedIpAddressTableEntry created.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheArpFixedIpAddressTableEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.12.3.4
sheArpFixedIpAddressTableEntry modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheArpFixedIpAddressTableEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.12.3.5
sheArpFixedIpAddressTableEntry deleted.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheArpFixedIpAddressTable 1.3.6.1.4.1.231.7.1.2.1.4.12.5
A set of fixed IP-Addresses for the ARP-Replay-Agent. There are two restrictions for the amount of possible IpAddresses on subscriber ports. One per bridgePort via sheBridgePortIpAddressPermitCount and one per UNI port via sheBridgeBaseMaxIpUNI parameter (global for NE), which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. Note: Currently, the SHE system support only 1 fixed IP address configuration per Bridgeport. For that reason, the NE will always use the configured Bridgeport index also as selected value for the tableindex sheArpFixedIpAddressIndex. The number of fixed addresses could be expanded in future releases, but such changes maybe force an index change for this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheArpFixedIpAddressEntry

sheArpFixedIpAddressEntry 1.3.6.1.4.1.231.7.1.2.1.4.12.5.1
On entry consist of an Index ,one configured IP-Address, the bridgePortIndex of the configured port and the assoiated learned mac-address. Index for the Entry are the sheArpFixedIpAddressIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheArpFixedIpAddressEntry  

sheArpFixedIpAddressIndex 1.3.6.1.4.1.231.7.1.2.1.4.12.5.1.1
A free running index for this table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sheArpFixedIpAddressBridgePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.12.5.1.2
The index of the bridgePort were this Ip-Address is configured for.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sheArpFixedIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.12.5.1.3
A configured fixed ip-address. Note: There is an additional restriction of possible IpAddresses per UNI port which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheArpFixedIpAddressLearnedMac 1.3.6.1.4.1.231.7.1.2.1.4.12.5.1.4
The learned mac-address for this ipAddress-entry.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheArpFixedIpAntiSpoofingStatus 1.3.6.1.4.1.231.7.1.2.1.4.12.5.1.5
0-inactive: IP Anti-spoofing Disabled. Or in case that an IP Anti-spoofing is enabled but the setting to the line card is failed. 1- active: IP Anti-spoofing is enabled and the setting to the line card is successful.
Status: current Access: read-only
OBJECT-TYPE    
  SheArpFixedIpAntiSpoofingStatusType  

sheArpFixedIpAddressInnerVlanTag 1.3.6.1.4.1.231.7.1.2.1.4.12.5.1.6
The inner vlan tag, where this configured fixed ip address should be valid on the bridgeport. This configuration is needed for IpAs feature and the ARP relay agent. 0 could be used as wildcard configuration but the feature of use the same IP in different Vlan's is not available in that case. New parameter with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheArpFixedIpAddressOuterVlanTag 1.3.6.1.4.1.231.7.1.2.1.4.12.5.1.7
The outer vlan tag, where this configured fixed ip address should be valid on the bridgeport. This configuration is needed for IpAs feature and the ARP relay agent. 0 could be used as wildcard configuration but the feature of use the same IP in different Vlan's is not available in that case. New parameter with R2.8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheArpFixedIpAddressControl 1.3.6.1.4.1.231.7.1.2.1.4.12.6
OBJECT IDENTIFIER    

sheArpFixedIpAddressControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.12.6.1
A SetRequest on this attribute starts a command execution process in the NetElement. 802 - createArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlBridgePortIndex sheArpFixedIpAddressControlAddress sheArpFixedIpAddressControlInnerVlanTag (new with R2.8) sheArpFixedIpAddressControlOuterVlanTag (new with R2.8) 803 - modifyArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlIndex sheArpFixedIpAddressControlBridgePortIndex sheArpFixedIpAddressControlAddress sheArpFixedIpAddressControlInnerVlanTag (new with R2.8) sheArpFixedIpAddressControlOuterVlanTag (new with R2.8) 804 - deleteArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheArpFixedIpAddressControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.12.6.2
The index of the table-entry to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sheArpFixedIpAddressControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.12.6.3
Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheArpFixedIpAddressControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.12.6.4
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheArpFixedIpAddressControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.12.6.5
Command result (error code) attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheArpFixedIpAddressControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.12.6.6
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheArpFixedIpAddressControlBridgePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.12.6.7
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sheArpFixedIpAddressControlAddress 1.3.6.1.4.1.231.7.1.2.1.4.12.6.8
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

sheArpFixedIpAddressControlInnerVlanTag 1.3.6.1.4.1.231.7.1.2.1.4.12.6.9
look at table. New parameter with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheArpFixedIpAddressControlOuterVlanTag 1.3.6.1.4.1.231.7.1.2.1.4.12.6.10
look at table. New parameter with R2.8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4093  

sheDhcpSnoop 1.3.6.1.4.1.231.7.1.2.1.4.12.7
OBJECT IDENTIFIER    

sheDhcpSnoopingTable 1.3.6.1.4.1.231.7.1.2.1.4.12.7.1
look at table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheDhcpSnoopingEntry

sheDhcpSnoopingEntry 1.3.6.1.4.1.231.7.1.2.1.4.12.7.1.1
One entry for every existing client for a bridgePort.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheDhcpSnoopingEntry  

sheDhcpSnoopingBridgePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.12.7.1.1.1
BridgePortIndex from bridgePortTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sheDhcpSnoopingIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.12.7.1.1.2
A client-assigned IP address from Dhcp server
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheDhcpSnoopingMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.12.7.1.1.3
A client's Mac address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheDhcpSnoopingRemainingTime 1.3.6.1.4.1.231.7.1.2.1.4.12.7.1.1.4
Remaining time until the lease time to the IP address is over
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheIpAntiSpoofingStatus 1.3.6.1.4.1.231.7.1.2.1.4.12.7.1.1.5
0-inactive: IP Anti-spoofing Diabled. Or in case that an IP Anti-spoofing is enabled but the setting to the line card is failed. 1- active: IP Anti-spoofing is enabled and the setting to the line card is successful.
Status: current Access: read-only
OBJECT-TYPE    
  SheIpAntiSpoofingStatusType  

sheDhcpSnoopingVlanId 1.3.6.1.4.1.231.7.1.2.1.4.12.7.1.1.6
VlanIndex from VlanTable. This show which VLAN the client uses.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4093  

sheDhcpSnoopControl 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2
OBJECT IDENTIFIER    

sheDhcpSnoopControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.1
deleteSnoopEntry(706), - it deletes a DHCP Snoop Entry as an ADMIN account. parameters: sheDhcpSnoopControlRequest sheDhcpSnoopControlBridgePortIndex sheDhcpSnoopControlIpAddress sheDhcpSnoopControlVlanId ipAntiSpoofingSet(707), - it enables or diables an IP Anti-spoofing at NE. parameters: sheDhcpSnoopControlRequest sheIpAntiSpoofingControlEnable ipAntiSpoofingGracePeriodSet(708) - it sets a grace period when enabling an IP Anti-Spoofing. parameters: sheDhcpSnoopControlRequest sheIpAntiSpoofingControlGracePeriod
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheDhcpSnoopControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.2
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheDhcpSnoopControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.3
Wait time for the manager on long lasting commands
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheDhcpSnoopControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.4
Time stamp attribute set at the end of a command
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheDhcpSnoopControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.5
Result of the last command
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheDhcpSnoopControlBridgePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.6
A BridgePort Index to delete from table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sheDhcpSnoopControlIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.7
The IP address of the snoop entry to delete
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheIpAntiSpoofingControlEnable 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.8
True : Enable False : Disable Note for R2.8: There is an additional per bridgeport configuration for IpAs with R2.8 available (sheBridgePortIpAsMode), which will be outvoted by this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheIpAntiSpoofingControlGracePeriod 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.9
It is a wait time for retrieving an IP address from DHCP Server. It prevents clients from not being set from DHCP and finally being dropped when setting an IP Anti-Spoofing Enable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sheDhcpSnoopControlVlanId 1.3.6.1.4.1.231.7.1.2.1.4.12.7.2.10
VlanIndex from VlanTable. This show which VLAN the client uses.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4093  

sheIpAntiSpoofingInfo 1.3.6.1.4.1.231.7.1.2.1.4.12.7.3
OBJECT IDENTIFIER    

sheIpAntiSpoofingEnable 1.3.6.1.4.1.231.7.1.2.1.4.12.7.3.1
This configuration enable/disable the IpAs feature for all subscriber ports of the NE. True : Enable False : Disable Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies. If this switch was enabled', only cards with convergate chipset will made check for the triple Ip-innerTag-OuterTag. Note for R2.8: There is an additional per bridgeport configuration for IpAs with R2.8 available (sheBridgePortIpAsMode), which will be outvoted by this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheIpAntiSpoofingGracePeriod 1.3.6.1.4.1.231.7.1.2.1.4.12.7.3.2
It is a wait time for retrieving an IP address from DHCP Server. It prevents clients from not being set from DHCP and finally being dropped when setting an IP Anti-Spoofing Enable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sheIpAntiSpoofingRemainingTime 1.3.6.1.4.1.231.7.1.2.1.4.12.7.3.3
After user sets up an IP Anti-Spoofing, there is some interval until this function is actually adjusted to a LineCard. It is called GracePeriod. This attruibute indicates the remaining time of real adjustment.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sheIpAntiSpoofingNotifications 1.3.6.1.4.1.231.7.1.2.1.4.12.7.4
OBJECT IDENTIFIER    

sheIpAntiSpoofingEvents 1.3.6.1.4.1.231.7.1.2.1.4.12.7.4.1
OBJECT IDENTIFIER    

sheIpAntiSpoofingChanged 1.3.6.1.4.1.231.7.1.2.1.4.12.7.4.1.1
It notifies that the Ip Anti-Spoofing setting is changed. If sheIpAntiSpoofingEnableis True, it indicates IP Anti-Spoofing Enable. If sheIpAntiSpoofingEnable is False, it means IP Anti-Spoofing Disable.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheIpAntiSpoofingGracePeriodChanged 1.3.6.1.4.1.231.7.1.2.1.4.12.7.4.1.2
It notifies that GracePeriod of IpAnti-Spoofing is modified.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheDhcpSnoopingEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.12.7.4.1.3
It notifies that the requested DhcpSnooping Entry was deleted.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheArpVlanTable 1.3.6.1.4.1.231.7.1.2.1.4.12.8
Each entry in this table describe an arp flood policy based on vlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheArpVlanEntry

sheArpVlanEntry 1.3.6.1.4.1.231.7.1.2.1.4.12.8.1
entry of the table
Status: current Access: not-accessible
OBJECT-TYPE    
  SheArpVlanEntry  

sheArpVlanFloodFlag 1.3.6.1.4.1.231.7.1.2.1.4.12.8.1.1
arp forward policy flag.
Status: current Access: read-only
OBJECT-TYPE    
  SheArpVlanFloodType  

sheArpVlanControl 1.3.6.1.4.1.231.7.1.2.1.4.12.9
OBJECT IDENTIFIER    

sheArpVlanControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.12.9.1
command to control the sheArpVlanTable. the valid command should be: modifyArpVlanFlood(901): sheArpVlanControlVlanId sheArpVlanControlFloodFlag
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheArpVlanControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.12.9.2
The status of a control request.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheArpVlanControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.12.9.3
The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheArpVlanControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.12.9.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheArpVlanControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.12.9.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheArpVlanControlVlanId 1.3.6.1.4.1.231.7.1.2.1.4.12.9.6
VLAN ID which is controlled for ARP flooding.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4093  

sheArpVlanControlFloodFlag 1.3.6.1.4.1.231.7.1.2.1.4.12.9.7
Arp foward policy. enable: flood ARP packets, disable: do not flood ARP packets
Status: current Access: read-write
OBJECT-TYPE    
  SheArpVlanFloodType  

sheArpVlanNotifications 1.3.6.1.4.1.231.7.1.2.1.4.12.10
OBJECT IDENTIFIER    

sheArpVlanFloodModified 1.3.6.1.4.1.231.7.1.2.1.4.12.10.1
ARP flooding policy for a VLAN has been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheArpConformance 1.3.6.1.4.1.231.7.1.2.1.4.12.100
OBJECT IDENTIFIER    

sheArpCompliances 1.3.6.1.4.1.231.7.1.2.1.4.12.100.1
OBJECT IDENTIFIER    

sheArpCompliance 1.3.6.1.4.1.231.7.1.2.1.4.12.100.1.1
The compliance statement for the ARP MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheArpGroups 1.3.6.1.4.1.231.7.1.2.1.4.12.100.2
OBJECT IDENTIFIER    

sheArpBaseGroup 1.3.6.1.4.1.231.7.1.2.1.4.12.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheArpControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.12.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheArpNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.12.100.2.3
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheArpFixedIpAddressGroup 1.3.6.1.4.1.231.7.1.2.1.4.12.100.2.4
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheArpFixedIpAddressControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.12.100.2.5
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheDhcpSnoopingGroup 1.3.6.1.4.1.231.7.1.2.1.4.12.100.2.6
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheDhcpSnoopingControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.12.100.2.7
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheDhcpSnoopingNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.12.100.2.8
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheQoSPm 1.3.6.1.4.1.231.7.1.2.1.4.13
OBJECT IDENTIFIER    

sheQoSPmCounterTable 1.3.6.1.4.1.231.7.1.2.1.4.13.1
The QoS Performance counter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheQoSPmCounterEntry

sheQoSPmCounterEntry 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1
The table provides set of hw-packet counters for egrees direction. The given values represent the current queue fill levels. These table will be indeced by the ifIndex of the GE uplink. To get usefull results, the NE should support a reasonable priority to queue mapping.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheQoSPmCounterEntry  

sheQoSPacketCounterQueue1 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1.1
Current number of packets in the Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sheQoSPacketCounterQueue2 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1.2
Current number of packets in the Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sheQoSPacketCounterQueue3 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1.3
Current number of packets in the Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sheQoSPacketCounterQueue4 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1.4
Current number of packets in the Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sheQoSPacketCounterQueue5 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1.5
Current number of packets in the Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sheQoSPacketCounterQueue6 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1.6
Current number of packets in the Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sheQoSPacketCounterQueue7 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1.7
Current number of packets in the Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sheQoSPacketCounterQueue8 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1.8
Current number of packets in the Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sheQoSDroppedPacketCounter 1.3.6.1.4.1.231.7.1.2.1.4.13.1.1.9
Dropped packets per Interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sheQoSPmControl 1.3.6.1.4.1.231.7.1.2.1.4.13.2
OBJECT IDENTIFIER    

sheQoSPmControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.13.2.1
clearQosPmCounters: sheQoSPmControlIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheQoSPmControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.13.2.2
Value depends on the used ControlRequest.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheQoSPmControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.13.2.3
The status of a user command. .
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheQoSPmControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.13.2.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheQoSPmControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.13.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheQoSPmControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.13.2.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheQoSPmNotifications 1.3.6.1.4.1.231.7.1.2.1.4.13.3
OBJECT IDENTIFIER    

sheQoSPmCountersCleared 1.3.6.1.4.1.231.7.1.2.1.4.13.3.1
Counters cleared.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheQoSPmConformance 1.3.6.1.4.1.231.7.1.2.1.4.13.100
OBJECT IDENTIFIER    

sheQoSPmCompliances 1.3.6.1.4.1.231.7.1.2.1.4.13.100.1
OBJECT IDENTIFIER    

sheQoSPmCompliance 1.3.6.1.4.1.231.7.1.2.1.4.13.100.1.1
Description.
Status: current Access: read-only
MODULE-COMPLIANCE    

sheQoSPmGroups 1.3.6.1.4.1.231.7.1.2.1.4.13.100.2
OBJECT IDENTIFIER    

sheQoSPmGroup 1.3.6.1.4.1.231.7.1.2.1.4.13.100.2.1
Description.
Status: current Access: read-only
OBJECT-GROUP    

sheQoSPmControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.13.100.2.2
Description.
Status: current Access: read-only
OBJECT-GROUP    

sheQoSPmNotificationsGroup 1.3.6.1.4.1.231.7.1.2.1.4.13.100.2.3
Description.
Status: current Access: read-only
NOTIFICATION-GROUP    

sheUmas 1.3.6.1.4.1.231.7.1.2.1.4.14
OBJECT IDENTIFIER    

sheUmasBase 1.3.6.1.4.1.231.7.1.2.1.4.14.1
OBJECT IDENTIFIER    

sheUmasUseDhcpNextHop 1.3.6.1.4.1.231.7.1.2.1.4.14.1.1
Using the nexthop address of DHCP packet as a protected MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheUmasBaseUsePppoeNextHop 1.3.6.1.4.1.231.7.1.2.1.4.14.1.2
Indicates if umas keeps the uplink mac address through PADR (PPPoE Active Discovery Request).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheUmasBasePppoeAgingTime 1.3.6.1.4.1.231.7.1.2.1.4.14.1.3
Indicates time until the next-hop address of pppoe is deleted from umas table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 600..4294967295  

sheUmasTable 1.3.6.1.4.1.231.7.1.2.1.4.14.2
The Uplink MAC antispoofing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheUmasEntry

sheUmasEntry 1.3.6.1.4.1.231.7.1.2.1.4.14.2.1
Umas is an abbreviation for Uplink mac anti spoofing. This table contains a few entries for Uplink (Gateway, DHCP server, etc) Mac anti-spoofing function. 2 ways for that: specifying a static Mac address and automatically collecting Mac addresses to be protected.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheUmasEntry  

sheUmasIndex 1.3.6.1.4.1.231.7.1.2.1.4.14.2.1.1
The index of Umas table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sheUmasAddress 1.3.6.1.4.1.231.7.1.2.1.4.14.2.1.2
The mac address which is proctected.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheUmasIsStatic 1.3.6.1.4.1.231.7.1.2.1.4.14.2.1.3
Indicates if this entry is static or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheUmasIsDhcpNextHop 1.3.6.1.4.1.231.7.1.2.1.4.14.2.1.4
Indicates if this address is the next hop address of DHCP packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheUmasIsPppoeNextHop 1.3.6.1.4.1.231.7.1.2.1.4.14.2.1.5
Indicates if this address is the next hop address of PPPoE packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheUmasControl 1.3.6.1.4.1.231.7.1.2.1.4.14.3
OBJECT IDENTIFIER    

sheUmasControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.14.3.1
setUmasUseDhcpNextHop: sheUmasControlUseDhcpNextHop addUmasStaticAddr: sheUmasControlIndex sheUmasControlStaticAddr delUmasStaticAddr: sheUmasControlIndex sheUmasControlStaticAddr setUmasUsePppoeNextHop: sheUmasControlUsePppoeNextHop setUmasPppoeAgingTime: sheUmasControlPppoeAgingTime
Status: current Access: read-write
OBJECT-TYPE    
  SheUmasControlRequestType  

sheUmasControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.14.3.2
Status of command. If requestBusy a command is still ongoing and another command will be rejected.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheUmasControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.4.14.3.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheUmasControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.14.3.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheUmasControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.14.3.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheUmasControlReqResultType  

sheUmasControlStaticAddr 1.3.6.1.4.1.231.7.1.2.1.4.14.3.6
The static MAC address which should be protected.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheUmasControlUseDhcpNextHop 1.3.6.1.4.1.231.7.1.2.1.4.14.3.7
Using the nexthop address of DHCP packet as a protected MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheUmasControlIndex 1.3.6.1.4.1.231.7.1.2.1.4.14.3.8
Index for controlrequest to identify the table entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheUmasControlUsePppoeNextHop 1.3.6.1.4.1.231.7.1.2.1.4.14.3.9
Indicates if umas keeps the uplink mac address through PADR (PPPoE Active Discovery Request).
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheUmasControlPppoeAgingTime 1.3.6.1.4.1.231.7.1.2.1.4.14.3.10
Indicates time until the next-hop address of pppoe is deleted from umas table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 600..4294967295  

sheUmasNotifications 1.3.6.1.4.1.231.7.1.2.1.4.14.4
OBJECT IDENTIFIER    

sheUmasStaticAddrChanged 1.3.6.1.4.1.231.7.1.2.1.4.14.4.1
Called after addUmasStaticAddr(102), delUmasStaticAddr(103) is requested for notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheUmasUseDhcpNextHopChanged 1.3.6.1.4.1.231.7.1.2.1.4.14.4.2
Called after setUmasUseDhcpNextHop (101) is requested for notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheUmasUsePppoeNextHopChanged 1.3.6.1.4.1.231.7.1.2.1.4.14.4.3
Called after setUmasUsePppoeNextHop (104) is requested for notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheUmasPppoeAgingTimeChanged 1.3.6.1.4.1.231.7.1.2.1.4.14.4.4
Called after setUmasPppoeAgingTime (105) is requested for notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheUmasVlanEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.14.4.5
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheUmasVlanEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.14.4.6
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheUmasAlarms 1.3.6.1.4.1.231.7.1.2.1.4.14.4.10
OBJECT IDENTIFIER    

sheUmasIUBlacklistOverflow 1.3.6.1.4.1.231.7.1.2.1.4.14.4.10.1
UMAS blacklist overflow per card alarm. AlarmReportingSource -> entPhysicalIndex of card AlarmReportingSourceType -> physicalEntity New with R2.8 maintenance.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheUmasVlanTable 1.3.6.1.4.1.231.7.1.2.1.4.14.5
CR#003659 - UMAS extension with R2.8 New with R2.8 maintenance.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheUmasVlanEntry

sheUmasVlanEntry 1.3.6.1.4.1.231.7.1.2.1.4.14.5.1
The table contain all VLAN's for which dynamic UMAS should be supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheUmasVlanEntry  

sheUmasVlanId 1.3.6.1.4.1.231.7.1.2.1.4.14.5.1.1
A vlanid of which dynamic UMAS should be supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4093  

sheUmasVlanControl 1.3.6.1.4.1.231.7.1.2.1.4.14.6
OBJECT IDENTIFIER    

sheUmasVlanControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.14.6.1
createUmasVlanEntry (110): sheUmasVlanControlVlanId deleteUmasVlanEntry (111): sheUmasVlanControlVlanId
Status: current Access: read-write
OBJECT-TYPE    
  SheUmasControlRequestType  

sheUmasVlanControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.14.6.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheUmasVlanControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.14.6.3
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheUmasVlanControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.14.6.4
Maximum command execution time (timeout) in seconds in case of a long running command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheUmasVlanControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.14.6.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheUmasControlReqResultType  

sheUmasVlanControlVlanId 1.3.6.1.4.1.231.7.1.2.1.4.14.6.6
Table index to create or delete.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4093  

sheUmasConformance 1.3.6.1.4.1.231.7.1.2.1.4.14.100
OBJECT IDENTIFIER    

sheUmasCompliances 1.3.6.1.4.1.231.7.1.2.1.4.14.100.1
OBJECT IDENTIFIER    

sheUmasCompliance 1.3.6.1.4.1.231.7.1.2.1.4.14.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheUmasGroups 1.3.6.1.4.1.231.7.1.2.1.4.14.100.2
OBJECT IDENTIFIER    

sheUmasGroup 1.3.6.1.4.1.231.7.1.2.1.4.14.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheUmasControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.14.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheUmasNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.14.100.2.3
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheCebs 1.3.6.1.4.1.231.7.1.2.1.4.15
OBJECT IDENTIFIER    

sheCebsPortTable 1.3.6.1.4.1.231.7.1.2.1.4.15.1
The CEBS port table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheCebsPortEntry

sheCebsPortEntry 1.3.6.1.4.1.231.7.1.2.1.4.15.1.1
table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SheCebsPortEntry  

sheCebsPortBridgePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.15.1.1.1
Index to the sheBridgePortTable. Points to the Bridgeport this configuration is made for. If created, the CEBS state of this Bridgeport is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sheCebsPortControl 1.3.6.1.4.1.231.7.1.2.1.4.15.2
OBJECT IDENTIFIER    

sheCebsPortControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.15.2.1
950 - createCebsPortTableEntry Parameters : sheCebsControlBridgePortIndex 951 - deleteCebsPotyTableEntry Parameters : sheCebsControlBridgePortIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheCebsPortControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.15.2.2
configuration control status
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheCebsPortControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.15.2.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCebsPortControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.15.2.4
Result of the last command
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheCebsPortControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.15.2.5
Maximum command execution time (timeout) in seconds in case of a long running command
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheCebsPortControlBridgePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.15.2.6
Index to the sheBridgePortTable. Points to the Bridgeport were this configuration is made for. If configured, the cebs state of this Bridgeport is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheCebsSubscriberTable 1.3.6.1.4.1.231.7.1.2.1.4.15.3
The CEBS subscriber table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheCebsSubscriberEntry

sheCebsSubscriberEntry 1.3.6.1.4.1.231.7.1.2.1.4.15.3.1
table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SheCebsSubscriberEntry  

sheCebsSubscriberIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.15.3.1.1
The subscriber IP address configured by DHCP or operator.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheCebsSubscriberBridePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.15.3.1.2
Index to the sheBridgePortTable. Points to the Bridgeport this configuration is made for.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheCebsSubscriberVlan 1.3.6.1.4.1.231.7.1.2.1.4.15.3.1.3
The vlan that subscriber uses.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheCebsSubscriberIsStatic 1.3.6.1.4.1.231.7.1.2.1.4.15.3.1.4
Indicates if this subscriber is created by operator command, sheArpFixedIpAddressControlRequest.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCebsSubscriberIsDynamic 1.3.6.1.4.1.231.7.1.2.1.4.15.3.1.5
Indicates if this subscriber is created by DHCP.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheCebsSubscriberOperState 1.3.6.1.4.1.231.7.1.2.1.4.15.3.1.6
The operating state specifying whether the subscriber is able to get CEBS service. 1 : Down 2 : Up
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheCebsDhcpGatewayTable 1.3.6.1.4.1.231.7.1.2.1.4.15.4
The CEBS Dhcp gateway table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheCebsDhcpGatewayEntry

sheCebsDhcpGatewayEntry 1.3.6.1.4.1.231.7.1.2.1.4.15.4.1
table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SheCebsDhcpGatewayEntry  

sheCebsDhcpGatewayUserVlan 1.3.6.1.4.1.231.7.1.2.1.4.15.4.1.1
Subscriver vlan
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheCebsDhcpGatewayIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.15.4.1.2
The dymamic IP address that a DHCP automatically sets as a gateway.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheCebsStaticGatewayTable 1.3.6.1.4.1.231.7.1.2.1.4.15.5
The CEBS static gateway table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheCebsStaticGatewayEntry

sheCebsStaticGatewayEntry 1.3.6.1.4.1.231.7.1.2.1.4.15.5.1
table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SheCebsStaticGatewayEntry  

sheCebsStaticGatewayUserVlan 1.3.6.1.4.1.231.7.1.2.1.4.15.5.1.1
Subscriver vlan
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

sheCebsStaticGatewayIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.15.5.1.2
The static IP address that a user vlan uses as a gateway. If this value is not configured, follow the the value that DHCP sets automatically.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheCebsStaticGatewayControl 1.3.6.1.4.1.231.7.1.2.1.4.15.6
OBJECT IDENTIFIER    

sheCebsStaticGatewayControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.15.6.1
952 - createCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan sheCebsStaticGatewayControlIpAddress 953 - modifyCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan sheCebsStaticGatewayControlIpAddress 954 - deleteCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheCebsStaticGatewayControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.15.6.2
configuration control status
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheCebsStaticGatewayControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.15.6.3
Time stamp attribute set at the end of a command
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCebsStaticGatewayControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.15.6.4
Result of the last command
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheCebsStaticGatewayControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.15.6.5
Maximum command execution time (timeout) in seconds in case of a long running command
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheCebsStaticGatewayControlUserVlan 1.3.6.1.4.1.231.7.1.2.1.4.15.6.6
Subscriver vlan
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

sheCebsStaticGatewayControlIpAddress 1.3.6.1.4.1.231.7.1.2.1.4.15.6.7
The static IP address that a user vlan uses as a gateway. If this value is not configured, follow the the value that DHCP sets automatically.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheCebsVirtualMacTable 1.3.6.1.4.1.231.7.1.2.1.4.15.7
cebs virtual mac table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheCebsVirtualMacEntry

sheCebsVirtualMacEntry 1.3.6.1.4.1.231.7.1.2.1.4.15.7.1
table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SheCebsVirtualMacEntry  

sheCebsVirtualMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.15.7.1.1
Mac address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheCebsVirtualMacType 1.3.6.1.4.1.231.7.1.2.1.4.15.7.1.2
The flag specifying what this mac address is used for. 1 : IP(Internet Protocol), This is a global mac address for IP. The number of mac is only one for the IP. In this case sheCebsVirtualMacEntPhysicalIndex indicates rack index. 2 : PPPoE(Point to Point Protocol over Ethernet) This mac is assigned to a slot for PPPoE. The number of mac is one per slot. In this case sheCebsVirtualMacEntPhysicalIndex indicates the index of a slot.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheCebsVirtualMacEntPhysicalIndex 1.3.6.1.4.1.231.7.1.2.1.4.15.7.1.3
The entPhysical index of the card/rack that this virtual mac will be used. This is table index also!!
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

sheCebsVirtualMacControl 1.3.6.1.4.1.231.7.1.2.1.4.15.8
OBJECT IDENTIFIER    

sheCebsVirtualMacControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.15.8.1
955 - createCebsVirtualMacTableEntry Parameters : sheCebsVirtualMacControlAddress sheCebsVirtualMacControlType SheCebsVirtualMacControlEntPhysicalIndex 956 - deleteCebsVirtualMacTableEntry Parameters : sheCebsVirtualMacControlAddress
Status: current Access: read-write
OBJECT-TYPE    
  SheBridgeControlRequestType  

sheCebsVirtualMacControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.15.8.2
configuration control status
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheCebsVirtualMacControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.15.8.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheCebsVirtualMacControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.15.8.4
Result of the last command
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheCebsVirtualMacControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.15.8.5
Maximum command execution time (timeout) in seconds in case of a long running command
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheCebsVirtualMacControlAddress 1.3.6.1.4.1.231.7.1.2.1.4.15.8.6
Virtual mac address used during CEBS service
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheCebsVirtualMacControlType 1.3.6.1.4.1.231.7.1.2.1.4.15.8.7
The flag specifying what this mac address is used for. 1 : IP(Internet Protocol), This is global mac address for IP. The number of mac is only one for the IP. In this case sheCebsVirtualMacEntPhysicalIndex indicates rack index 2 : PPPoE(Point to Point Protocol over Ethernet) This mac is assigned to a slot for PPPoE. The number of mac is one per slot. In this case sheCebsVirtualMacEntPhysicalIndex indicates the index of a slot.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheCebsVirtualMacControlEntPhysicalIndex 1.3.6.1.4.1.231.7.1.2.1.4.15.8.8
The entPhysical index of the card/rack that this virtual mac will be used. Index of the table entry which should be modified.
Status: current Access: read-write
OBJECT-TYPE    
  PhysicalIndex  

sheCebsNotifications 1.3.6.1.4.1.231.7.1.2.1.4.15.9
OBJECT IDENTIFIER    

sheCebsPortTableEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.15.9.1
sheCebsPortTableEntry has been created.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCebsPortTableEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.15.9.2
sheCebsPortTableEntry has been deleted.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCebsStaticGatewayTableEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.15.9.3
sheCebsStaticGatewayTableEntry has been created.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCebsStaticGatewayTableEntryModified 1.3.6.1.4.1.231.7.1.2.1.4.15.9.4
sheCebsStaticGatewayTableEntry has been modified.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCebsStaticGatewayTableEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.15.9.5
sheCebsStaticGatewayTableEntry has been deleted.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCebsVirtualMacTableEntryCreated 1.3.6.1.4.1.231.7.1.2.1.4.15.9.6
sheCebsPortTableEntry has been created.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCebsVirtualMacTableEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.4.15.9.7
sheCebsVirtualMacTableEntry has been deleted.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheCebsConformance 1.3.6.1.4.1.231.7.1.2.1.4.15.100
OBJECT IDENTIFIER    

sheCebsCompliances 1.3.6.1.4.1.231.7.1.2.1.4.15.100.1
OBJECT IDENTIFIER    

sheCebsCompliance 1.3.6.1.4.1.231.7.1.2.1.4.15.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheCebsGroups 1.3.6.1.4.1.231.7.1.2.1.4.15.100.2
OBJECT IDENTIFIER    

sheCebsGroup 1.3.6.1.4.1.231.7.1.2.1.4.15.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheCebsControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.15.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheCebsNotificationsGroup 1.3.6.1.4.1.231.7.1.2.1.4.15.100.2.3
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheMat 1.3.6.1.4.1.231.7.1.2.1.4.16
OBJECT IDENTIFIER    

sheMatBase 1.3.6.1.4.1.231.7.1.2.1.4.16.1
OBJECT IDENTIFIER    

sheMatDslamId 1.3.6.1.4.1.231.7.1.2.1.4.16.1.1
A DSLAM ID used for IU's MAC address translation. MAT is performed based on this DSLAM ID. The DSLAM ID should be interpreted as a hex value. Depending on the used MatTranslationMode, the following restrictions should be made: TranslationMode: world - The DSLAM ID should be a value between 0..4095 (0..FFF, 12 bits are valid)! The not needed upper bits will be ignored. ths - The DSLAM ID should be a value between 0..524287 (0..7FFFF, 19 bits are valid)! The not needed upper bits will be ignored. Default value is -1, that means a DSLAM ID is not assigned. NOTE: A modified DSLAM ID need an IU reset for activation!
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..524287  

sheMatTranslationMode 1.3.6.1.4.1.231.7.1.2.1.4.16.1.2
The attribute describes, which format for MAC address translation will be used. general structure: byte5-byte4-byte3-byte2-byte1-byte0 bit47 .........................bit0 world(1) - byte 5 - DSLAM ID (bit 47-44, 4 bit) and identifier (0110) byte 4 - DSLAM ID byte 3 - slot number byte 2 - port number byte 1 - VCC number byte 0 - MAC address index ths(2) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will use an fix offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. thsNoIndexOffset(3) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will not use an offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe.
Status: current Access: read-only
OBJECT-TYPE    
  SheMatTranslationModeType  

sheMatPortTable 1.3.6.1.4.1.231.7.1.2.1.4.16.2
The MAT port table for enable/disable this feature on bridgePort base. NOTE: This table will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! With R2.8 the functionality is available in the NE again, but the configuration should directly be done via sheBridgePortTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheMatPortEntry

sheMatPortEntry 1.3.6.1.4.1.231.7.1.2.1.4.16.2.1
table entry
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SheMatPortEntry  

sheMatPortEnable 1.3.6.1.4.1.231.7.1.2.1.4.16.2.1.1
Enable or disable the MAC address translation feature on bridgePort base. NOTE: This parameter will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! With R2.8 the functionality is available in the NE again, but the configuration should directly be done via sheBridgePortTable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TruthValue  

sheMatTable 1.3.6.1.4.1.231.7.1.2.1.4.16.3
The MAT table contain the translated MAT addresses and her original laerned value. New with R2.8 maintenance: This release introduces a new ControlRequest command for refresh of this table. Without calling this command, the table content will be static and not longer automatically updated. The refresh command could be used together with the BridgePortIndex, which is the first table index here. If a valid BridgePortIndex value was used, only the tableEntries with this BridgePortIndex as first key will be refreshed. If the BridgePortIndex is 0 or unknown the full table will be refreshed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheMatEntry

sheMatEntry 1.3.6.1.4.1.231.7.1.2.1.4.16.3.1
table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SheMatEntry  

sheMatTranslatedMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.16.3.1.1
Translated MAC address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheMatOriginalMacAddress 1.3.6.1.4.1.231.7.1.2.1.4.16.3.1.2
Original MAC address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sheMatIndex 1.3.6.1.4.1.231.7.1.2.1.4.16.3.1.3
This index is the new third index value for this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..64  

sheMatControl 1.3.6.1.4.1.231.7.1.2.1.4.16.4
OBJECT IDENTIFIER    

sheMatControlRequest 1.3.6.1.4.1.231.7.1.2.1.4.16.4.1
setDslamId(100): sheMatControlDslamId setPortEnable(101): sheMatControlBridgePortIndex sheMatControlPortEnable setMatTranslationMode(102): sheMatControlTranslationMode NOTE: SheMatPortTable will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! Usecase setPortEnable(101) is not longer supported!! Release R2.8 will support a new port specific enable command via sheBridgePortTable! New with R2.8 maintenance: refreshMatTable (105): sheMatControlBridgePortIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheMatControlRequestType  

sheMatControlStatus 1.3.6.1.4.1.231.7.1.2.1.4.16.4.2
Describes the status of a user command group, used for block commands while a command execution is in process. - Values : idle, busy, passed, failed - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at the end of a command
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheMatControlTimestamp 1.3.6.1.4.1.231.7.1.2.1.4.16.4.3
Time stamp attribute set at the end of a command.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMatControlReqResult 1.3.6.1.4.1.231.7.1.2.1.4.16.4.4
Result of the last command
Status: current Access: read-only
OBJECT-TYPE    
  SheBridgeControlReqResultType  

sheMatControlTimer 1.3.6.1.4.1.231.7.1.2.1.4.16.4.5
Maximum command execution time (timeout) in seconds in case of a long running command
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheMatControlDslamId 1.3.6.1.4.1.231.7.1.2.1.4.16.4.6
A DSLAM ID used for IU's MAC address translation. MAT is performed based on this DSLAM ID. The DSLAM ID should be interpreted as a hex value. Depending on the used MatTranslationMode, the following restrictions should be made: TranslationMode: world - The DSLAM ID should be a value between 0..4095 (0..FFF, 12 bits are valid)! The not needed upper bits will be ignored. ths - The DSLAM ID should be a value between 0..524287 (0..7FFFF, 19 bits are valid)! The not needed upper bits will be ignored. Default value is -1, that means a DSLAM ID is not assigned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..524287  

sheMatControlBridgePortIndex 1.3.6.1.4.1.231.7.1.2.1.4.16.4.7
A bridge port index identifier
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheMatControlPortEnable 1.3.6.1.4.1.231.7.1.2.1.4.16.4.8
Sets MAC address translation enable/disable. NOTE: This value will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!!
Status: obsolete Access: read-write
OBJECT-TYPE    
  TruthValue  

sheMatControlTranslationMode 1.3.6.1.4.1.231.7.1.2.1.4.16.4.9
The attribute descripes, which format for MAC address translation will be used. world(1) - byte 5 - DSLAM ID (bit 47-44, 4 bit) and identifier (0110) byte 4 - DSLAM ID byte 3 - slot number byte 2 - port number byte 1 - VCC number byte 0 - MAC address index ths(2) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will use an fix offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. thsNoIndexOffset(3) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will not use an offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe.
Status: current Access: read-write
OBJECT-TYPE    
  SheMatTranslationModeType  

sheMatNotifications 1.3.6.1.4.1.231.7.1.2.1.4.16.5
OBJECT IDENTIFIER    

sheMatDslamIdChanged 1.3.6.1.4.1.231.7.1.2.1.4.16.5.1
sheMatDslamId has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMatPortEnableChanged 1.3.6.1.4.1.231.7.1.2.1.4.16.5.2
sheMatPortEnable has been changed.
Status: obsolete Access: read-write
NOTIFICATION-TYPE    

sheMatTranslationModeChanged 1.3.6.1.4.1.231.7.1.2.1.4.16.5.3
sheMatTranslationMode has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMatTableUpdated 1.3.6.1.4.1.231.7.1.2.1.4.16.5.4
MAT table update finished.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheMatConformance 1.3.6.1.4.1.231.7.1.2.1.4.16.100
OBJECT IDENTIFIER    

sheMatCompliances 1.3.6.1.4.1.231.7.1.2.1.4.16.100.1
OBJECT IDENTIFIER    

sheMatCompliance 1.3.6.1.4.1.231.7.1.2.1.4.16.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheMatGroups 1.3.6.1.4.1.231.7.1.2.1.4.16.100.2
OBJECT IDENTIFIER    

sheMatGroup 1.3.6.1.4.1.231.7.1.2.1.4.16.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheMatControlGroup 1.3.6.1.4.1.231.7.1.2.1.4.16.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheMatNotificationsGroup 1.3.6.1.4.1.231.7.1.2.1.4.16.100.2.3
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheMatObsoleteGroup 1.3.6.1.4.1.231.7.1.2.1.4.16.100.2.4
Description.
Status: obsolete Access: read-write
OBJECT-GROUP    

sheMatObsoleteNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.4.16.100.2.5
Description.
Status: obsolete Access: read-write
NOTIFICATION-GROUP