SDLC-OPT-MIB

Imported modules

Imported symbols

mgmt	NetworkAddress	IpAddress
Counter	Gauge	TimeTicks
enterprises	OBJECT-TYPE

Defined Types

Counter16
INTEGER	0..65535

DisplayString
OCTET STRING

Cdx6500PCTSDLCPortEntry
SEQUENCE
	cdx6500sdlcpCfgPortNum	INTEGER
	cdx6500sdlcpSubType	INTEGER
	cdx6500sdlcpTxCoding	INTEGER
	cdx6500sdlcpLineType	INTEGER
	cdx6500sdlcpTxType	INTEGER
	cdx6500sdlcpSendSigDelay	INTEGER
	cdx6500sdlcpClock	INTEGER
	cdx6500sdlcpClockSpeed	INTEGER
	cdx6500sdlcpNumControllers	INTEGER
	cdx6500sdlcpPollTimer	INTEGER
	cdx6500sdlcpPollFrequency	INTEGER
	cdx6500sdlcpTries	INTEGER
	cdx6500sdlcpOptions	DisplayString
	cdx6500sdlcpPortAddress	DisplayString
	cdx6500sdlcpPortOptions	DisplayString
	cdx6500sdlcpHPADResponseDelay	INTEGER
	cdx6500sdlcpMaxFrameSize	INTEGER
	cdx6500sdlcpRtsCtsDelay	INTEGER
	cdx6500sdlcpElectricalInterfaceType	INTEGER
	cdx6500sdlcpV24ElectricalInterfaceOption	INTEGER
	cdx6500sdlcpHighSpeedElectricalInterfaceOption	INTEGER

Cdx6500PPSTSDLCPortEntry
SEQUENCE
	cdx6500sdlcpStatsPortNum	INTEGER
	cdx6500sdlcpPortStatus	INTEGER
	cdx6500sdlcpPortSpeed	INTEGER
	cdx6500sdlcpCharInTotal	Counter
	cdx6500sdlcpCharOutTotal	Counter
	cdx6500sdlcpCharsInPerSec	INTEGER
	cdx6500sdlcpCharsOutPerSec	INTEGER
	cdx6500sdlcpFrameInTotal	Counter
	cdx6500sdlcpFrameOutTotal	Counter
	cdx6500sdlcpFramesInPerSec	INTEGER
	cdx6500sdlcpFramesOutPerSec	INTEGER
	cdx6500sdlcpStateChange	DisplayString
	cdx6500sdlcpLinkDowns	Counter16
	cdx6500sdlcpUtilizationIn	INTEGER
	cdx6500sdlcpUtilizationOut	INTEGER
	cdx6500sdlcpOverrunErrors	Counter16
	cdx6500sdlcpUnderrunErrors	Counter16
	cdx6500sdlcpCRCErrors	Counter16
	cdx6500sdlcpPacketsQueued	INTEGER
	cdx6500sdlcpRRInFrames	Counter
	cdx6500sdlcpRROutFrames	Counter
	cdx6500sdlcpRNRInFrames	Counter
	cdx6500sdlcpRNROutFrames	Counter
	cdx6500sdlcpSNRMInFrames	Counter
	cdx6500sdlcpSNRMOutFrames	Counter
	cdx6500sdlcpUAInFrames	Counter
	cdx6500sdlcpUAOutFrames	Counter
	cdx6500sdlcpDMInFrames	Counter
	cdx6500sdlcpDMOutFrames	Counter
	cdx6500sdlcpXIDInFrames	Counter
	cdx6500sdlcpXIDOutFrames	Counter
	cdx6500sdlcpREJInFrames	Counter
	cdx6500sdlcpREJOutFrames	Counter
	cdx6500sdlcpDISCInFrames	Counter
	cdx6500sdlcpDISCOutFrames	Counter
	cdx6500sdlcpRDInFrames	Counter
	cdx6500sdlcpRDOutFrames	Counter
	cdx6500sdlcpFRMRInFrames	Counter
	cdx6500sdlcpFRMROutFrames	Counter
	cdx6500sdlcpUPInFrames	Counter
	cdx6500sdlcpUPOutFrames	Counter
	cdx6500sdlcpTESTInFrames	Counter
	cdx6500sdlcpTESTOutFrames	Counter
	cdx6500sdlcpXIDNullInFrames	Counter
	cdx6500sdlcpXIDNullOutFrames	Counter
	cdx6500sdlcpXID0InFrames	Counter
	cdx6500sdlcpXID0OutFrames	Counter
	cdx6500sdlcpXID1InFrames	Counter
	cdx6500sdlcpXID1OutFrames	Counter
	cdx6500sdlcpXID3InFrames	Counter
	cdx6500sdlcpXID3OutFrames	Counter

Cdx6500SPCTSDLCStationEntry
SEQUENCE
	cdx6500sdlcsCfgPortNum	INTEGER
	cdx6500sdlcsCfgStationNum	INTEGER
	cdx6500sdlcsStationAddr	DisplayString
	cdx6500sdlcsFrameWinSize	INTEGER
	cdx6500sdlcsAutocallMnem	DisplayString
	cdx6500sdlcsProtocolID	DisplayString
	cdx6500sdlcsCUG	DisplayString
	cdx6500sdlcsOptions	DisplayString
	cdx6500sdlcsStationID	DisplayString
	cdx6500sdlcsBillingFlag	INTEGER
	cdx6500sdlcsStnSubaddress	DisplayString
	cdx6500sdlcsGroupAddress	DisplayString
	cdx6500sdlcsX25Password	DisplayString
	cdx6500sdlcsProtectionLevel	INTEGER
	cdx6500sdlcsReconnectTimeout	INTEGER
	cdx6500sdlcsReconnectLimit	INTEGER
	cdx6500sdlcsTrafficPriority	INTEGER
	cdx6500sdlcsCallTimer	INTEGER
	cdx6500sdlcsIdleTimer	INTEGER
	cdx6500sdlcsVerConnTimer	INTEGER
	cdx6500sdlcsUnsusWaitTimer	INTEGER
	cdx6500sdlcsMaxCallAttempts	INTEGER

Cdx6500SPSTSDLCStationEntry
SEQUENCE
	cdx6500sdlcsStatsPortNum	INTEGER
	cdx6500sdlcsStatsStationNum	INTEGER
	cdx6500sdlcsStatsStationAddr	INTEGER
	cdx6500sdlcsQLLCState	DisplayString
	cdx6500sdlcsCharInTotal	Counter
	cdx6500sdlcsCharOutTotal	Counter
	cdx6500sdlcsCharsInPerSec	INTEGER
	cdx6500sdlcsCharsOutPerSec	INTEGER
	cdx6500sdlcsFrameInTotal	Counter
	cdx6500sdlcsFrameOutTotal	Counter
	cdx6500sdlcsFramesInPerSec	INTEGER
	cdx6500sdlcsFramesOutPerSec	INTEGER
	cdx6500sdlcsQRRInTotal	Counter16
	cdx6500sdlcsQRROutTotal	Counter16
	cdx6500sdlcsUtilizationIn	INTEGER
	cdx6500sdlcsUtilizationOut	INTEGER
	cdx6500sdlcsPacketsQueued	INTEGER
	cdx6500sdlcsRRInFrames	Counter
	cdx6500sdlcsRROutFrames	Counter
	cdx6500sdlcsRNRInFrames	Counter
	cdx6500sdlcsRNROutFrames	Counter
	cdx6500sdlcsSNRMInFrames	Counter
	cdx6500sdlcsSNRMOutFrames	Counter
	cdx6500sdlcsUAInFrames	Counter
	cdx6500sdlcsUAOutFrames	Counter
	cdx6500sdlcsDMInFrames	Counter
	cdx6500sdlcsDMOutFrames	Counter
	cdx6500sdlcsXIDInFrames	Counter
	cdx6500sdlcsXIDOutFrames	Counter
	cdx6500sdlcsREJInFrames	Counter
	cdx6500sdlcsREJOutFrames	Counter
	cdx6500sdlcsDISCInFrames	Counter
	cdx6500sdlcsDISCOutFrames	Counter
	cdx6500sdlcsRDInFrames	Counter
	cdx6500sdlcsRDOutFrames	Counter
	cdx6500sdlcsFRMRInFrames	Counter
	cdx6500sdlcsFRMROutFrames	Counter
	cdx6500sdlcsUPInFrames	Counter
	cdx6500sdlcsUPOutFrames	Counter
	cdx6500sdlcsTESTInFrames	Counter
	cdx6500sdlcsTESTOutFrames	Counter
	cdx6500sdlcsQSMInFrames	Counter16
	cdx6500sdlcsQSMOutFrames	Counter16
	cdx6500sdlcsQUAInFrames	Counter16
	cdx6500sdlcsQUAOutFrames	Counter16
	cdx6500sdlcsQRDInFrames	Counter16
	cdx6500sdlcsQRDOutFrames	Counter16
	cdx6500sdlcsQFRMRInFrames	Counter16
	cdx6500sdlcsQFRMROutFrames	Counter16
	cdx6500sdlcsQXIDInFrames	Counter16
	cdx6500sdlcsQXIDOutFrames	Counter16
	cdx6500sdlcsQDCInFrames	Counter16
	cdx6500sdlcsQDCOutFrames	Counter16
	cdx6500sdlcsQDMInFrames	Counter16
	cdx6500sdlcsQDMOutFrames	Counter16
	cdx6500sdlcsQTESTInFrames	Counter16
	cdx6500sdlcsQTESTOutFrames	Counter16
	cdx6500sdlcsQSSInFrames	Counter16
	cdx6500sdlcsQSSOutFrames	Counter16
	cdx6500sdlcsQRSInFrames	Counter16
	cdx6500sdlcsQRSOutFrames	Counter16
	cdx6500sdlcsXIDNullInFrames	Counter
	cdx6500sdlcsXIDNullOutFrames	Counter
	cdx6500sdlcsXID0InFrames	Counter
	cdx6500sdlcsXID0OutFrames	Counter
	cdx6500sdlcsXID1InFrames	Counter
	cdx6500sdlcsXID1OutFrames	Counter
	cdx6500sdlcsXID3InFrames	Counter
	cdx6500sdlcsXID3OutFrames	Counter
	cdx6500sdlcsVSNumber	INTEGER
	cdx6500sdlcsVRNumber	INTEGER
	cdx6500sdlcsNRNumber	INTEGER
	cdx6500sdlcsNSNumber	INTEGER

Cdx6500ContSDLCStationEntry
SEQUENCE
	cdx6500sdlcsContPortNum	INTEGER
	cdx6500sdlcsContStationNum	INTEGER
	cdx6500sdlcsContBootStation	INTEGER
	cdx6500sdlcsContDisableStation	INTEGER
	cdx6500sdlcsContEnableStation	INTEGER
	cdx6500sdlcsContBusyOutStation	INTEGER
	cdx6500sdlcsContResetStnStats	INTEGER

Defined Values

codex		1.3.6.1.4.1.449
OBJECT IDENTIFIER

cdxProductSpecific		1.3.6.1.4.1.449.2
OBJECT IDENTIFIER

cdx6500		1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER

cdx6500Configuration		1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER

cdx6500CfgProtocolGroup		1.3.6.1.4.1.449.2.1.2.1
OBJECT IDENTIFIER

cdx6500PCTPortProtocolGroup		1.3.6.1.4.1.449.2.1.2.1.1
OBJECT IDENTIFIER

cdx6500PCTStationProtocolGroup		1.3.6.1.4.1.449.2.1.2.1.3
OBJECT IDENTIFIER

cdx6500Statistics		1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER

cdx6500StatProtocolGroup		1.3.6.1.4.1.449.2.1.3.1
OBJECT IDENTIFIER

cdx6500PSTPortProtocolGroup		1.3.6.1.4.1.449.2.1.3.1.1
OBJECT IDENTIFIER

cdx6500PSTStationProtocolGroup		1.3.6.1.4.1.449.2.1.3.1.3
OBJECT IDENTIFIER

cdx6500Controls		1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER

cdx6500ContSDLC		1.3.6.1.4.1.449.2.1.4.5
OBJECT IDENTIFIER

cdx6500PCTSDLCPortTable		1.3.6.1.4.1.449.2.1.2.1.1.12
All of the configuration parameters relevant to the SDLC Port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PCTSDLCPortEntry

cdx6500PCTSDLCPortEntry		1.3.6.1.4.1.449.2.1.2.1.1.12.1
A row of SDLC Port configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PCTSDLCPortEntry

cdx6500sdlcpCfgPortNum		1.3.6.1.4.1.449.2.1.2.1.1.12.1.1
Specifies a specific port (physical port number) in the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500sdlcpSubType		1.3.6.1.4.1.449.2.1.2.1.1.12.1.2
This is the SDLC port subtype hpad - Host PAD. tpad - Terminal PAD. newvalHpad - same functionality as 'hpad', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hpad(0), tpad(1), newvalHpad(50)

cdx6500sdlcpTxCoding		1.3.6.1.4.1.449.2.1.2.1.1.12.1.3
This is the data encoding used on the SDLC link. nrz - Non Return to Zero nrzi - Non Return to Zero Inverted newvalNrz - same functionality as 'nrz', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nrz(0), nrzi(1), newvalNrz(50)

cdx6500sdlcpLineType		1.3.6.1.4.1.449.2.1.2.1.1.12.1.4
Type of line, indicates whether half duplex or full duplex signals are being generated. fdx - communications occuring in both directions simultaneously between devices. hdx - transmission occuring in both directions, but only one direction at a time. This operation is not currently supported. hdxdce - (Half Duplex DCE) This is used on the HPAD when the port is a DCE and the port is interfacing directly to a FEP. The port detects RTS go HIGH, waits RTS TO CTS DELAY ms, and raises CTS. newvalHdx - same functionality as 'hdx', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hdx(0), fdx(1), hdxdce(2), newvalHdx(50)

cdx6500sdlcpTxType		1.3.6.1.4.1.449.2.1.2.1.1.12.1.5
This is the transmission mode used on the line. tws - Two way Simultaneout. twa - Two Way Alternate used by most controllers. newvalTws - same functionality as 'tws', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	tws(0), twa(1), newvalTws(50)

cdx6500sdlcpSendSigDelay		1.3.6.1.4.1.449.2.1.2.1.1.12.1.6
This object is replaced by cdx6500sdlcpHPADResponseDelay. This is a configurable delay that defines the amount of time that the HPAD delays before sending a response to the HOST. The delay is specified in milliseconds.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	deprecatedObj(1)

cdx6500sdlcpClock		1.3.6.1.4.1.449.2.1.2.1.1.12.1.7
int - Internal clock source. ext - External clock source. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	int(0), ext(1), newvalInt(50)

cdx6500sdlcpClockSpeed		1.3.6.1.4.1.449.2.1.2.1.1.12.1.8
This is the speed of the port in bits per second, when using internal clocking.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1200..80000

cdx6500sdlcpNumControllers		1.3.6.1.4.1.449.2.1.2.1.1.12.1.9
This is the number of controllers (PU TYPE 1 or PU TYPE 2 devices) on the SDLC line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..32

cdx6500sdlcpPollTimer		1.3.6.1.4.1.449.2.1.2.1.1.12.1.10
Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds ).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

cdx6500sdlcpPollFrequency		1.3.6.1.4.1.449.2.1.2.1.1.12.1.11
Time in milliseconds between polls when no data is exchanged.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	50..250

cdx6500sdlcpTries		1.3.6.1.4.1.449.2.1.2.1.1.12.1.12
Maximum number of attempts to complete a transmission.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

cdx6500sdlcpOptions		1.3.6.1.4.1.449.2.1.2.1.1.12.1.13
Select options on this SDLC port as follows: NONE - no option specified MARKi - port uses mark idle between frame exchanges (Required by System 36 - AS/400 series) DMs - HPAD does not send DM in response to SNRM/XID received from host. After call is accepted and TPAD responds with QUA/QXID, HPAD will send UA/XID. DISCs - TPAD sends a DISC frame when station goes down. The DISC may be retransmitted up to Tries times, if the Cluster Controller does not respond, before sending a SNRM. FFBF - TPAD sends a broadcast XID. If the number of controllers configured is equal to 1 and the associated QLLC station table option is not XIDs the TPAD will poll with a broadcast address until a secondary station response address is received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..5)

cdx6500sdlcpPortAddress		1.3.6.1.4.1.449.2.1.2.1.1.12.1.14
When an SDLC port makes a call, this address is inserted into the calling address field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..15)

cdx6500sdlcpPortOptions		1.3.6.1.4.1.449.2.1.2.1.1.12.1.15
Specify any of the following port control options: NONE - no option specified MB - raise Pin 22 when the port becomes disabled
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(2..4)

cdx6500sdlcpHPADResponseDelay		1.3.6.1.4.1.449.2.1.2.1.1.12.1.16
This object replaces cdx6500sdlcpSendSigDelay. This is a configurable delay that defines the amount of time that the HPAD delays before sending a response to the HOST. The delay is specified in milliseconds. newvalMsec0 : same functionality as 'msec0', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	msec0(0), msec50(51), msec100(100), msec150(150), msec200(200), newvalMsec0(50)

cdx6500sdlcpMaxFrameSize		1.3.6.1.4.1.449.2.1.2.1.1.12.1.17
Maximum size (in bytes) of a frame, excluding the frame header and CRC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4096

cdx6500sdlcpRtsCtsDelay		1.3.6.1.4.1.449.2.1.2.1.1.12.1.18
Delay in milliseconds that the HDX DCE TPAD or the HDXDCE HPAD waits from the time it detects RTS go HIGH until the time it raises CTS. It is accurate to +/- 2 milliseconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..250

cdx6500sdlcpElectricalInterfaceType		1.3.6.1.4.1.449.2.1.2.1.1.12.1.19
Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	v24(1), v35(2), v36(3), x21(4), none(5)

cdx6500sdlcpV24ElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.12.1.20
Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ri(1), tm(2)

cdx6500sdlcpHighSpeedElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.12.1.21
Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), xover(2)

cdx6500PPSTSDLCPortTable		1.3.6.1.4.1.449.2.1.3.1.1.12
All of the statistics parameters relevant to the SDLC Port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPSTSDLCPortEntry

cdx6500PPSTSDLCPortEntry		1.3.6.1.4.1.449.2.1.3.1.1.12.1
A row of SDLC Port statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPSTSDLCPortEntry

cdx6500sdlcpStatsPortNum		1.3.6.1.4.1.449.2.1.3.1.1.12.1.1
Specifies a specific port (physical port number) in the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500sdlcpPortStatus		1.3.6.1.4.1.449.2.1.3.1.1.12.1.2
Specifies the current port status. up : At least one station is responding to polls. down : None of the stattions are responding to polls. disabled : The port is disabled by the user. newvalDisabled : same functionality as 'disabled', new enumeration added for RFc1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1), busyout(2), up(3), down(4), newvaldisabled(50)

cdx6500sdlcpPortSpeed		1.3.6.1.4.1.449.2.1.3.1.1.12.1.3
The measured port speed in bits per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcpCharInTotal		1.3.6.1.4.1.449.2.1.3.1.1.12.1.4
Total number of characters received until now, not including all SDLC header characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpCharOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.12.1.5
Total number of characters transmitted until now, not including all SDLC header characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpCharsInPerSec		1.3.6.1.4.1.449.2.1.3.1.1.12.1.6
The average number of characters received per second during the previous minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcpCharsOutPerSec		1.3.6.1.4.1.449.2.1.3.1.1.12.1.7
The average number of characters transmitted per second during the previous minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcpFrameInTotal		1.3.6.1.4.1.449.2.1.3.1.1.12.1.8
Total number of SDLC frames received until now.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpFrameOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.12.1.9
The total number of SDLC frames transmitted until now.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpFramesInPerSec		1.3.6.1.4.1.449.2.1.3.1.1.12.1.10
The average number of frames received per second during the previous minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcpFramesOutPerSec		1.3.6.1.4.1.449.2.1.3.1.1.12.1.11
The average number of frames transmitted per second during the previous minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcpStateChange		1.3.6.1.4.1.449.2.1.3.1.1.12.1.12
The date and time when the link entered the current state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

cdx6500sdlcpLinkDowns		1.3.6.1.4.1.449.2.1.3.1.1.12.1.13
Total number of times link has made a transition from the UP state to the DOWN state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcpUtilizationIn		1.3.6.1.4.1.449.2.1.3.1.1.12.1.14
Indicates a percentage of the link resources currently in use in the IN(from the line to the port) direction.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcpUtilizationOut		1.3.6.1.4.1.449.2.1.3.1.1.12.1.15
Indicates a percentage of the link resources currently in use in the OUT(from the port to the line) direction.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcpOverrunErrors		1.3.6.1.4.1.449.2.1.3.1.1.12.1.16
Total number of overrun errors counted by the I/O driver. Overrun errors occur when received data is lost because it cannot be processed by the CPU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcpUnderrunErrors		1.3.6.1.4.1.449.2.1.3.1.1.12.1.17
Total number of underrun errors counted by the I/O driver. Underrun errors occur when the transmission of a frame cannot be completed because of momentary CPU overload.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcpCRCErrors		1.3.6.1.4.1.449.2.1.3.1.1.12.1.18
Total number of CRC errors counted by the I/O driver.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcpPacketsQueued		1.3.6.1.4.1.449.2.1.3.1.1.12.1.19
Total number of packets queued at the SDLC protocol layer by the transmitter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcpRRInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.20
Total number of RR frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpRROutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.21
Total number of RR frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpRNRInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.22
Total number of RNR frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpRNROutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.23
Total number of RNR frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpSNRMInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.24
Total number of SNRM frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpSNRMOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.25
Total number of SNRM frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpUAInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.26
Total number of UA frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpUAOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.27
Total number of UA frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpDMInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.28
Total number of DM frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpDMOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.29
Total number of DM frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXIDInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.30
Total number of XID frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXIDOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.31
Total number of XID frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpREJInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.32
Total number of REJ frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpREJOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.33
Total number of REJ frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpDISCInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.34
Total number of DISC frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpDISCOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.35
Total number of DISC frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpRDInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.36
Total number of RD frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpRDOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.37
Total number of RD frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpFRMRInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.38
Total number of FRMR frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpFRMROutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.39
Total number of FRMR frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpUPInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.40
Total number of UP frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpUPOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.41
Total number of UP frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpTESTInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.42
Total number of TEST frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpTESTOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.43
Total number of TEST frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXIDNullInFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.44
Total number of XID Null frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXIDNullOutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.45
Total number of XID Null frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXID0InFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.46
Total number of XID Type 0 frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXID0OutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.47
Total number of XID Type 0 frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXID1InFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.48
Total number of XID Type 1 frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXID1OutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.49
Total number of XID Type 1 frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXID3InFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.50
Total number of XID Type 3 frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcpXID3OutFrames		1.3.6.1.4.1.449.2.1.3.1.1.12.1.51
Total number of XID Type 3 frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500SPCTSDLCStationTable		1.3.6.1.4.1.449.2.1.2.1.3.4
All of the configuration parameters relevant to the SDLC Station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500SPCTSDLCStationEntry

cdx6500SPCTSDLCStationEntry		1.3.6.1.4.1.449.2.1.2.1.3.4.1
A row of SDLC station configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500SPCTSDLCStationEntry

cdx6500sdlcsCfgPortNum		1.3.6.1.4.1.449.2.1.2.1.3.4.1.1
Refers to the physical port number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500sdlcsCfgStationNum		1.3.6.1.4.1.449.2.1.2.1.3.4.1.2
The number of the controller on the multidrop line. Also used for routing purposes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..32

cdx6500sdlcsStationAddr		1.3.6.1.4.1.449.2.1.2.1.3.4.1.3
The station address on the multidrop line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..2)

cdx6500sdlcsFrameWinSize		1.3.6.1.4.1.449.2.1.2.1.3.4.1.4
Frame level window size must be set to the same value in devices at each end of the link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7

cdx6500sdlcsAutocallMnem		1.3.6.1.4.1.449.2.1.2.1.3.4.1.5
This mnemonic references the remote address which will be called when polling activity is detected on the sdlc line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cdx6500sdlcsProtocolID		1.3.6.1.4.1.449.2.1.2.1.3.4.1.6
The protocol identifier is the first four bytes of the call user data. If not configured the PAD will use C3000000 as the protocol ID in the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..8)

cdx6500sdlcsCUG		1.3.6.1.4.1.449.2.1.2.1.3.4.1.7
The station may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except --)and separated by a comma. (e.g. 12,34,56,09,02,03). -- - No CUG Membership 00-99 - CUG Membership
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(23)

cdx6500sdlcsOptions		1.3.6.1.4.1.449.2.1.2.1.3.4.1.8
Select options on this SDLC station as follows: NONE - no option specified. CUG - check closed user group in incoming calls, and insert closed user group facility in outgoing calls. QRRs - HPAD sends QRR after QLLC link comes up XIDs - TPAD responds to QXIDs with XID configured for this station XIDs are not sent to the Cluster Controller. XID3 - HPAD and TPAD will pass XIDs transparently. This option should not be set if XIDs option is selected. Corresponding station options must be XID3. RNRs - TPAD initially polls with RNR until a data packet or an QRR is received by the QLLC station on the TPAD side. DFC - the station will wait the amount of time specified by the call timer before placing the first call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..4)

cdx6500sdlcsStationID		1.3.6.1.4.1.449.2.1.2.1.3.4.1.9
This is the identification sent by the TPAD in a response. to a QXID when XIDs are enabled in the QLLC Options.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..14)

cdx6500sdlcsBillingFlag		1.3.6.1.4.1.449.2.1.2.1.3.4.1.10
This controls whether billing (accounting) records will be created for calls on this port. off - Billing (accounting) records will not be created for calls on this port. on - Billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1), newvaloff(50)

cdx6500sdlcsStnSubaddress		1.3.6.1.4.1.449.2.1.2.1.3.4.1.11
The calling subaddress is appended to the port address to create the calling address in the autocall generated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..3)

cdx6500sdlcsGroupAddress		1.3.6.1.4.1.449.2.1.2.1.3.4.1.12
This is the address of the poll group to which this station belongs. Enter an address of 0x00 for no group membership.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..3)

cdx6500sdlcsX25Password		1.3.6.1.4.1.449.2.1.2.1.3.4.1.13
Only TPAD initiated autocall packets shall use this feature. The X.25 Network Password which may be up to 12 bytes long is inserted in the CUD of the Call Request packet. Padding with spaces must be added as necessary. Configure the Protocol ID to C3 01 00 00.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..24)

cdx6500sdlcsProtectionLevel		1.3.6.1.4.1.449.2.1.2.1.3.4.1.14
This specifies the level of data or connection protection which will be applied to calls to or from this port. The actual level for a call will be negotiated to the lesser of this level and the level configured for the other end of the call. none - No protection. cpOnly - Connection protection only. fullDcp - Full data and connection protection. newvalNone - same functionality as 'none', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), cponly(1), fulldcp(2), newvalnone(50)

cdx6500sdlcsReconnectTimeout		1.3.6.1.4.1.449.2.1.2.1.3.4.1.15
This specifies the number of seconds that DCP on the originating side will wait between reconnection attempts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..128

cdx6500sdlcsReconnectLimit		1.3.6.1.4.1.449.2.1.2.1.3.4.1.16
This specifies the number of times that DCP on the originating side will attempt to reconnect before clearing the call. If 0 is entered, it will not attempt to reconnect.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..127

cdx6500sdlcsTrafficPriority		1.3.6.1.4.1.449.2.1.2.1.3.4.1.17
This is the traffic priority of the SDLC station; low, medium, high, or expedite. newvalLowPriority : same functionality as 'lowPriority', new enumeration added for RFC1155 compatibility.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	lowpriority(0), medpriority(1), hipriority(2), xppriority(3), newvallowpriority(50)

cdx6500sdlcsCallTimer		1.3.6.1.4.1.449.2.1.2.1.3.4.1.18
This specifies the time before the next call is made. If 0 is entered, the time to the next call is handled internally. The time is in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..300

cdx6500sdlcsIdleTimer		1.3.6.1.4.1.449.2.1.2.1.3.4.1.19
The Link Idle Timer is used by the SNA Dial on Demand feature for determining how long the station should wait for a data frame before bringing the X.25 call down. If a 0 is entered, the call will never be brought down. The time is in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65534

cdx6500sdlcsVerConnTimer		1.3.6.1.4.1.449.2.1.2.1.3.4.1.20
The Verify Connection Timer is used by the SNA Dial on Demand feature for periodically verifying that the connection to the remote station is still active, after the link has been suspended. The timer specifies how long the the station waits before verifying the connection. If a 0 is entered, the connection will never be verified. The time is in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65534

cdx6500sdlcsUnsusWaitTimer		1.3.6.1.4.1.449.2.1.2.1.3.4.1.21
The Unsuspend Wait Timer is used by the SNA Dial on Demand feature for determining how long the station will wait in LINK-UNSUSPENDING state after receiving a call request before bringing the station down. If a 0 is entered, the station waits in LINK-UNSUSPENDED state forever. Time is in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65534

cdx6500sdlcsMaxCallAttempts		1.3.6.1.4.1.449.2.1.2.1.3.4.1.22
The Max Call Attempts is used to specify the number of times that the SDLC stations will attempt to autocall a remote destination. A value of zero will allow unlimited attempts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

cdx6500SPSTSDLCStationTable		1.3.6.1.4.1.449.2.1.3.1.3.4
All of the statistics parameters relevant to the SDLC Station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500SPSTSDLCStationEntry

cdx6500SPSTSDLCStationEntry		1.3.6.1.4.1.449.2.1.3.1.3.4.1
A row of SDLC station Statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500SPSTSDLCStationEntry

cdx6500sdlcsStatsPortNum		1.3.6.1.4.1.449.2.1.3.1.3.4.1.1
Refers to the physical port number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500sdlcsStatsStationNum		1.3.6.1.4.1.449.2.1.3.1.3.4.1.2
Station reference number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..32

cdx6500sdlcsStatsStationAddr		1.3.6.1.4.1.449.2.1.3.1.3.4.1.3
Configured station address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

cdx6500sdlcsQLLCState		1.3.6.1.4.1.449.2.1.3.1.3.4.1.4
Indicates the status of the QLLC layer: INOPERATIVE : No connection exists with the station. LINK-CLOSED : X.25 call is connected, but there has been no successful QXID exchange and data cannot pass. LINK-OPENING: The X.25 call is connected and there has been a successful QXID exchange. However, there has been no QUA or QDM response to a QSM command. LINK-OPENED : X.25 call is connected and data is passing. LINK-CLOSING: Disconnect in process. Station may come back up after an SVC clear or PVC reset. If it does not, boot the station to clear it. LINK-RECOVERY: X.25 call is connected and the station has sent a QFRMR packet over the link. Station may come back up after SVC clear or PVC reset. If it does not recover, boot the station to clear it. NOTE: This value is not supported by the 6500.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cdx6500sdlcsCharInTotal		1.3.6.1.4.1.449.2.1.3.1.3.4.1.5
Total number of characters received until now, not including SDLC header characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsCharOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.4.1.6
Total number of characters transmitted until now, not including SDLC header characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsCharsInPerSec		1.3.6.1.4.1.449.2.1.3.1.3.4.1.7
The average number of characters received per second during the previous minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcsCharsOutPerSec		1.3.6.1.4.1.449.2.1.3.1.3.4.1.8
The average number of characters transmitted per second during the previous minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcsFrameInTotal		1.3.6.1.4.1.449.2.1.3.1.3.4.1.9
Total number of frames received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsFrameOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.4.1.10
Total number of frames transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsFramesInPerSec		1.3.6.1.4.1.449.2.1.3.1.3.4.1.11
The average number of frames received per second during the previous minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcsFramesOutPerSec		1.3.6.1.4.1.449.2.1.3.1.3.4.1.12
The average number of frames transmitted per second during the previous minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcsQRRInTotal		1.3.6.1.4.1.449.2.1.3.1.3.4.1.13
Total number of QRR packets received until now.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQRROutTotal		1.3.6.1.4.1.449.2.1.3.1.3.4.1.14
Total number of QRR packets transmitted until now.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsUtilizationIn		1.3.6.1.4.1.449.2.1.3.1.3.4.1.15
Indicates a percentage of the link resources currently in use in the IN(from the line to the port) direction.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcsUtilizationOut		1.3.6.1.4.1.449.2.1.3.1.3.4.1.16
Indicates a percentage of the link resources currently in use in the OUT(from the port to the line) direction.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcsPacketsQueued		1.3.6.1.4.1.449.2.1.3.1.3.4.1.17
Total number of packets queued at the SDLC protocol layer by the transmitter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500sdlcsRRInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.18
Total number of RR frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsRROutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.19
Total number of RR frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsRNRInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.20
Total number of RNR frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsRNROutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.21
Total number of RNR frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsSNRMInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.22
Total number of SNRM frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsSNRMOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.23
Total number of SNRM frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsUAInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.24
Total number of UA frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsUAOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.25
Total number of UA frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsDMInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.26
Total number of DM frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsDMOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.27
Total number of DM frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsXIDInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.28
Total number of XID frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsXIDOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.29
Total number of XID frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsREJInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.30
Total number of REJ frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsREJOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.31
Total number of REJ frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsDISCInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.32
Total number of DISC frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsDISCOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.33
Total number of DISC frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsRDInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.34
Total number of RD frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsRDOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.35
Total number of RD frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsFRMRInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.36
Total number of FRMR frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsFRMROutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.37
Total number of FRMR frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsUPInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.38
Total number of UP frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsUPOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.39
Total number of UP frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsTESTInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.40
Total number of TEST frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsTESTOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.41
Total number of TEST frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsQSMInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.42
Total number of QSM packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQSMOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.43
Total number of QSM packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQUAInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.44
Total number of QUA packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQUAOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.45
Total number of QUA packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQRDInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.46
Total number of QRD packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQRDOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.47
Total number of QRD packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQFRMRInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.48
Total number of QFRMR packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQFRMROutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.49
Total number of QFRMR packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQXIDInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.50
Total number of QXID packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQXIDOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.51
Total number of QXID packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQDCInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.52
Total number of QDC packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQDCOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.53
Total number of QDC packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQDMInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.54
Total number of QDM packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQDMOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.55
Total number of QDM packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQTESTInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.56
Total number of QTEST packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQTESTOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.57
Total number of QTEST packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQSSInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.58
Total number of QSS packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQSSOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.59
Total number of QSS packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQRSInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.60
Total number of QRS packets received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsQRSOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.61
Total number of QRS packets transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500sdlcsXIDNullInFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.62
Total number of XID Null frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsXIDNullOutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.63
Total number of XID Null frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsXID0InFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.64
Total number of XID Type 0 frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsXID0OutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.65
Total number of XID Type 0 frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsXID1InFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.66
Total number of XID Type 1 frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsXID1OutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.67
Total number of XID Type 1 frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsXID3InFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.68
Total number of XID Type 3 frames received until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsXID3OutFrames		1.3.6.1.4.1.449.2.1.3.1.3.4.1.69
Total number of XID Type 3 frames transmitted until the present time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500sdlcsVSNumber		1.3.6.1.4.1.449.2.1.3.1.3.4.1.70
Next VS seuqunce number this station expects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..8

cdx6500sdlcsVRNumber		1.3.6.1.4.1.449.2.1.3.1.3.4.1.71
Next VR seuqunce number this station expects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..8

cdx6500sdlcsNRNumber		1.3.6.1.4.1.449.2.1.3.1.3.4.1.72
Next NR seuqunce number this station expects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..8

cdx6500sdlcsNSNumber		1.3.6.1.4.1.449.2.1.3.1.3.4.1.73
Next NS seuqunce number this station expects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..8

cdx6500ContSDLCStationTable		1.3.6.1.4.1.449.2.1.4.5.1
All of the control parameters relevant to the SDLC Station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500ContSDLCStationEntry

cdx6500ContSDLCStationEntry		1.3.6.1.4.1.449.2.1.4.5.1.1
A row of SDLC Station Control parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500ContSDLCStationEntry

cdx6500sdlcsContPortNum		1.3.6.1.4.1.449.2.1.4.5.1.1.1
Refers to the physical port number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..54

cdx6500sdlcsContStationNum		1.3.6.1.4.1.449.2.1.4.5.1.1.2
Station reference number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..32

cdx6500sdlcsContBootStation		1.3.6.1.4.1.449.2.1.4.5.1.1.3
Boots the specified SDLC station. boot - Boot Station noBoot - Do not boot Station
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	boot(1), noboot(2)

cdx6500sdlcsContDisableStation		1.3.6.1.4.1.449.2.1.4.5.1.1.4
Disables the specified SDLC station. disable - Disable Station. noDisable - Do not disable Station.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	disable(1), nodisable(2)

cdx6500sdlcsContEnableStation		1.3.6.1.4.1.449.2.1.4.5.1.1.5
Enables the specified SDLC station. enable - Enable Station. noEnable - Not not enable Station.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	enable(1), noenable(2)

cdx6500sdlcsContBusyOutStation		1.3.6.1.4.1.449.2.1.4.5.1.1.6
This operation is no longer supported. Busy out the specified SDLC station. busyOut - Busyout Station. noBusyOut - Do not busyout Station.
Status: deprecated	Access: write-only
OBJECT-TYPE
	INTEGER	busyout(1), nobusyout(2)

cdx6500sdlcsContResetStnStats		1.3.6.1.4.1.449.2.1.4.5.1.1.7
Resets statistics for the specified SDLC station reset - Reset Station Statistics noReset - Do not reset Station Statistics
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	reset(1), noreset(2)