SALIX-DS0-RTP-MIB

File: SALIX-DS0-RTP-MIB.mib (7906 bytes)

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
RFC1213-MIB	IF-MIB	SALIX-MIB

Imported symbols

MODULE-COMPLIANCE	OBJECT-GROUP	MODULE-IDENTITY
OBJECT-TYPE	Integer32	IpAddress
Counter32	TimeStamp	RowStatus
DisplayString	InterfaceIndex	platform1

Defined Types

ItxDsx0RtpConnectionEntry
SEQUENCE
	salixDsx0RtpConnectionInterface	InterfaceIndex
	salixDsx0RtpConnectionSrcIpAddress	IpAddress
	salixDsx0RtpConnectionSrcPort	INTEGER
	salixDsx0RtpConnectionDestIpAddress	IpAddress
	salixDsx0RtpConnectionDestPort	INTEGER
	salixDsx0RtpConnectionDirection	INTEGER
	salixDsx0RtpConnectionOperStatus	INTEGER
	salixDsx0RtpConnectionRowStatus	RowStatus

Defined Values

salixDsx0RtpMIB		1.3.6.1.4.1.2158.5.1.3
The MIB describing Salix specific DS0-RTP connection objects
MODULE-IDENTITY

salixDsx0RtpMIBObjects		1.3.6.1.4.1.2158.5.1.3.1
OBJECT IDENTIFIER

salixDsx0RtpMIBTraps		1.3.6.1.4.1.2158.5.1.3.2
OBJECT IDENTIFIER

salixDsx0RtpMIBCompliance		1.3.6.1.4.1.2158.5.1.3.3
OBJECT IDENTIFIER

salixDsx0RtpMIBTrapPrefix		1.3.6.1.4.1.2158.5.1.3.2.0
OBJECT IDENTIFIER

salixDsx0RtpConnectionTable		1.3.6.1.4.1.2158.5.1.3.1.1
A table describing the current DS0 to RTP connections. There should be one entry for each DS0-RTP connection in the system
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ItxDsx0RtpConnectionEntry

salixDsx0RtpConnectionEntry		1.3.6.1.4.1.2158.5.1.3.1.1.1
An entry in the ITX DS0-RTP Table. The entry provides information on the status and other attributes of the connection
Status: current	Access: not-accessible
OBJECT-TYPE
	ItxDsx0RtpConnectionEntry

salixDsx0RtpConnectionInterface		1.3.6.1.4.1.2158.5.1.3.1.1.1.1
The ifIndex that identifies the DS0 channel being connected to the RTP session
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

salixDsx0RtpConnectionSrcIpAddress		1.3.6.1.4.1.2158.5.1.3.1.1.1.2
The Source IP Address for the RTP Session part of the DS0-RTP connection
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

salixDsx0RtpConnectionSrcPort		1.3.6.1.4.1.2158.5.1.3.1.1.1.3
The Source Port for the RTP Session part of the DS0-RTP connection
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..65535

salixDsx0RtpConnectionDestIpAddress		1.3.6.1.4.1.2158.5.1.3.1.1.1.4
The Destination IP Address for the RTP Session part of the DS0-RTP connection
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

salixDsx0RtpConnectionDestPort		1.3.6.1.4.1.2158.5.1.3.1.1.1.5
The Destination Port for the RTP Session part of the DS0-RTP connection
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..65535

salixDsx0RtpConnectionDirection		1.3.6.1.4.1.2158.5.1.3.1.1.1.6
This attribute describes the direction of traffic flow in a connection. rtp2dsx0 (1) - Traffic flows from the RTP session to the DS0 channel dsx02rtp (2) - Traffic flows from the DS0 channel to the RTP session bidirectional (3) - Traffic flows in both directions in the connection
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	rtp2dsx0(1), dsx02rtp(2), bidirectional(3)

salixDsx0RtpConnectionOperStatus		1.3.6.1.4.1.2158.5.1.3.1.1.1.7
This attribute indicates the operational state of the DS0-RTP connection. up (1) - The connection is up and active down (2) - The connection is down and inactive unknown (3) - The status of the connection is unknown
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2), unknown(3)

salixDsx0RtpConnectionRowStatus		1.3.6.1.4.1.2158.5.1.3.1.1.1.8
The status of this entry in the salixDsx0RtpConnectTable. This object is used to delete a salixDsx0RtpConnectTable entry. To delete the connection, set this object to destory(6) Row status values: active(1) - set by the agent after this entry is created notInService(2) - not applicable notReady(3) - not applicable createAndGo(4) - not applicable createAndWait(5)- not applicable destroy(6) - set by the management entity to destroy entry
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

salixDsx0RtpGroups		1.3.6.1.4.1.2158.5.1.3.3.1
OBJECT IDENTIFIER

salixDsx0RtpCompliances		1.3.6.1.4.1.2158.5.1.3.3.2
OBJECT IDENTIFIER

salixDsx0RtpGroup		1.3.6.1.4.1.2158.5.1.3.3.1.3
Current Statistics for Dsx0Rtp Sessions
Status: current	Access: read-write
OBJECT-GROUP

salixDsx0RtpCompliance		1.3.6.1.4.1.2158.5.1.3.3.2.1
The basic implementation requirements for the SALIX-DS0-RTP-MIB.
Status: current	Access: read-write
MODULE-COMPLIANCE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor