SALIX-ANNOUNCEMENT-MIB

File: SALIX-ANNOUNCEMENT-MIB.mib (15388 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ATM-FORUM-M4-MIB ENTITY-MIB SALIX-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
NOTIFICATION-TYPE MODULE-COMPLIANCE OBJECT-GROUP
DisplayString TruthValue DateAndTime
atmfM4TrapAlarmSeverity entPhysicalIndex salixGeneric

Defined Types

SalixAnnouncementEntry  
SEQUENCE    
  salixAnnouncementIndex INTEGER
  salixAnnouncementIpAddress IpAddress
  salixAnnouncementFilename DisplayString
  salixAnnouncementUsername DisplayString
  salixAnnouncementPassword DisplayString
  salixAnnouncementRequest INTEGER
  salixAnnouncementState INTEGER
  salixAnnouncementDescription DisplayString
  salixAnnouncementInstall DateAndTime
  salixAnnouncementFull TruthValue
  salixAnnouncementStatusMessage OCTET STRING

SalixAnnouncementMappingEntry  
SEQUENCE    
  salixAnnouncementMappingStatus INTEGER

Defined Values

salixAnnouncementMIB 1.3.6.1.4.1.2158.2.6
The MIB describing objects relating to Announcements, Tones, and Continuity Tests for SALIX products
MODULE-IDENTITY    

salixAnnouncementMIBObjects 1.3.6.1.4.1.2158.2.6.1
OBJECT IDENTIFIER    

salixAnnouncementMIBTraps 1.3.6.1.4.1.2158.2.6.2
OBJECT IDENTIFIER    

salixAnnouncementMIBCompliance 1.3.6.1.4.1.2158.2.6.3
OBJECT IDENTIFIER    

salixAnnouncementMIBTrapPrefix 1.3.6.1.4.1.2158.2.6.2.0
OBJECT IDENTIFIER    

salixAnnouncementTable 1.3.6.1.4.1.2158.2.6.1.1
The announcement download table. This table provides a mechanism for downloading announcements to the system. Announcements that are successfully downloaded are installed on the system and occupy an entry in the salixAnnouncementTable. An entry in the salixAnnouncementTable exists for each bin on the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SalixAnnouncementEntry

salixAnnouncementEntry 1.3.6.1.4.1.2158.2.6.1.1.1
An entry in the salixAnnouncementTable that identifies the parameters necessary to download announcements to the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SalixAnnouncementEntry  

salixAnnouncementIndex 1.3.6.1.4.1.2158.2.6.1.1.1.1
The unique index (bin) that the announcement is stored in.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..20  

salixAnnouncementIpAddress 1.3.6.1.4.1.2158.2.6.1.1.1.2
The Ip Address where the salixAnnouncementFilename object resides.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

salixAnnouncementFilename 1.3.6.1.4.1.2158.2.6.1.1.1.3
The fully qualified filename found at the specified Ip Address (salixAnnouncementIpAddress) that is to be downloaded to the entry in the Table.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

salixAnnouncementUsername 1.3.6.1.4.1.2158.2.6.1.1.1.4
The username to be used when getting a file from the computer at the IP address indicated by the salixAnnouncementIpAddress attribute. For security reasons, reading this field will return an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

salixAnnouncementPassword 1.3.6.1.4.1.2158.2.6.1.1.1.5
The password to be used when getting a file from the computer at the IP address indicated by the salixAnnouncementIpAddress attribute. For security reasons, reading this field will return an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

salixAnnouncementRequest 1.3.6.1.4.1.2158.2.6.1.1.1.6
The announcement request for this row. Writing values to this object has the following side effects (depending on the value written: none(0) - no effect. Default value for this object. start(1) - start the FTP download and installation for the given announcement file. update(2) - Do not start the FTP download, just update system with the given version of the announcement that already exists.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), start(1), update(2)  

salixAnnouncementState 1.3.6.1.4.1.2158.2.6.1.1.1.7
The state of the download software request. none(1) - download not started or not supported inProgress(2) - download in progress success(3) - download to the announcement table was successful. aborted(4) - download aborted failed(5) - download to at least one plug-in unit failed locked(6) - the filename in the installed software entry is locked by the management processor software. installInProgress(7) - the bin is currently being installed to modules in the system and is not available for download
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), inProgress(2), success(3), aborted(4), failed(5), locked(6), installInProgress(7)  

salixAnnouncementDescription 1.3.6.1.4.1.2158.2.6.1.1.1.8
A Description for the announcement. Should be something that uniqely describes this announcement on the system, so that the operator can determine the difference between all the installed announcements on the system
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

salixAnnouncementInstall 1.3.6.1.4.1.2158.2.6.1.1.1.9
The time the announcement was installed on the system. This time is acutally the time that the download completes.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

salixAnnouncementFull 1.3.6.1.4.1.2158.2.6.1.1.1.10
This value indicates whether the announcement bin is full or not. True: an announcement file is present in this bin False: no announcement file is present in this bin
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

salixAnnouncementStatusMessage 1.3.6.1.4.1.2158.2.6.1.1.1.11
Status message that describes the current state of the download as indicated by the 'salixAnnouncementState' attribute.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(256)  

salixAnnouncementMappingTable 1.3.6.1.4.1.2158.2.6.1.2
The announcement mapping table is used to map salixAnnouncementIndex [bins] to the entPhysicalIndex that the announcement is installed on. When used in conjunction with the salixAnnouncementTable, it can be seen which boards in the system contain which announcements. An entry in this table exists for each announcement on each board that the announcement is installed on.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SalixAnnouncementMappingEntry

salixAnnouncementMappingEntry 1.3.6.1.4.1.2158.2.6.1.2.1
An entry in the salixAnnouncementMappingEntry that maps an salixAnnouncementIndex to an entPhysicalIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SalixAnnouncementMappingEntry  

salixAnnouncementMappingStatus 1.3.6.1.4.1.2158.2.6.1.2.1.1
Describes the current state of the announcement on the board in the system. ready (1) - The announcement is installed on the board and ready for use downloadInProgress(2) - The announcement is being installed on the board and is not ready for use
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), downloadInProgress(2), error(3)  

salixAnnouncementInstallFailure 1.3.6.1.4.1.2158.2.6.2.0.1
Indicates thats the installation of the announcement has failed. This notification is generated when the salixAnnouncementState for this download transitions from inProgress to failed. The default alarm severity for this alarm is 'major'.
Status: current Access: read-only
NOTIFICATION-TYPE    

salixAnnouncementInstallSuccess 1.3.6.1.4.1.2158.2.6.2.0.2
Indicates thats the installation of the announcement to all the Transcoders have succeeded. This notification is generated when the salixAnnouncementState for the download transitions from inProgress to success. The default alarm severity for this alarm is 'minor'.
Status: current Access: read-only
NOTIFICATION-TYPE    

salixAnnouncementGroups 1.3.6.1.4.1.2158.2.6.3.1
OBJECT IDENTIFIER    

salixAnnouncementCompliances 1.3.6.1.4.1.2158.2.6.3.2
OBJECT IDENTIFIER    

salixAnnouncementGroup 1.3.6.1.4.1.2158.2.6.3.1.1
Salix Announcement Objects Group
Status: current Access: read-only
OBJECT-GROUP    

salixAnnouncementMappingGroup 1.3.6.1.4.1.2158.2.6.3.1.2
Salix Announcement Mapping Objects Group
Status: current Access: read-only
OBJECT-GROUP    

salixAnnouncementCompliance 1.3.6.1.4.1.2158.2.6.3.2.1
The basic implementation requirements for the SALIX-ANNOUNCEMENT-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE