Rogue-Engineering-Inc-Sentinel-Remote-IO-with-SNMP

File: Rogue-Engineering-Inc-Sentinel-Remote-IO-with-SNMP.mib (73633 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-CONF
SNMP-FRAMEWORK-MIB

Imported symbols

enterprises MODULE-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE Integer32 MODULE-COMPLIANCE
OBJECT-GROUP SnmpAdminString

Defined Types

ValueTrapItem  
SEQUENCE    
  valueControllerID SnmpAdminString
  valueTrapDesc SnmpAdminString
  valueCurrentValue Integer32

Defined Values

rogueSentinelv2 1.3.6.1.4.1.28459.228.2
This MIB is for the Sentinel Remote I/O with SNMP
MODULE-IDENTITY    

rogueEngr 1.3.6.1.4.1.28459
OBJECT IDENTIFIER    

rogueRIOS 1.3.6.1.4.1.28459.228
OBJECT IDENTIFIER    

regMap 1.3.6.1.4.1.28459.228.2.1
OBJECT IDENTIFIER    

trapMap 1.3.6.1.4.1.28459.228.2.2
OBJECT IDENTIFIER    

history 1.3.6.1.4.1.28459.228.2.3
OBJECT IDENTIFIER    

regFirmwareVersion 1.3.6.1.4.1.28459.228.2.1.3
Firmware Version
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regFirmwareRevision 1.3.6.1.4.1.28459.228.2.1.4
Firmware Revision
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regSerialBaud 1.3.6.1.4.1.28459.228.2.1.99
Baud Rate 0=9600,1=19200,2=57600
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regSNMPManagerIP1 1.3.6.1.4.1.28459.228.2.1.100
SNMP Manager IP Address (Destination for Traps) (1 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regSNMPManagerIP2 1.3.6.1.4.1.28459.228.2.1.101
SNMP Manager IP Address (Destination for Traps) (2 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regSNMPManagerIP3 1.3.6.1.4.1.28459.228.2.1.102
SNMP Manager IP Address (Destination for Traps) (3 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regSNMPManagerIP4 1.3.6.1.4.1.28459.228.2.1.103
SNMP Manager IP Address (Destination for Traps) (4 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regMODBUSAddress 1.3.6.1.4.1.28459.228.2.1.104
MODBUS Address
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regMACAddress1 1.3.6.1.4.1.28459.228.2.1.105
MAC Address (1 of 6)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regMACAddress2 1.3.6.1.4.1.28459.228.2.1.106
MAC Address (2 of 6)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regMACAddress3 1.3.6.1.4.1.28459.228.2.1.107
MAC Address (3 of 6)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regMACAddress4 1.3.6.1.4.1.28459.228.2.1.108
MAC Address (4 of 6)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regMACAddress5 1.3.6.1.4.1.28459.228.2.1.109
MAC Address (5 of 6)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regMACAddress6 1.3.6.1.4.1.28459.228.2.1.110
MAC Address (6 of 6)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regIPAddress1 1.3.6.1.4.1.28459.228.2.1.111
IP Address (1 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regIPAddress2 1.3.6.1.4.1.28459.228.2.1.112
IP Address (2 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regIPAddress3 1.3.6.1.4.1.28459.228.2.1.113
IP Address (3 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regIPAddress4 1.3.6.1.4.1.28459.228.2.1.114
IP Address (4 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regGatewayIPAddress1 1.3.6.1.4.1.28459.228.2.1.115
Gateway IP Address (1 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regGatewayIPAddress2 1.3.6.1.4.1.28459.228.2.1.116
Gateway IP Address (2 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regGatewayIPAddress3 1.3.6.1.4.1.28459.228.2.1.117
Gateway IP Address (3 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regGatewayIPAddress4 1.3.6.1.4.1.28459.228.2.1.118
Gateway IP Address (4 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regSubnetMask1 1.3.6.1.4.1.28459.228.2.1.119
Subnet Mask (1 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regSubnetMask2 1.3.6.1.4.1.28459.228.2.1.120
Subnet Mask (2 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regSubnetMask3 1.3.6.1.4.1.28459.228.2.1.121
Subnet Mask (3 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regSubnetMask4 1.3.6.1.4.1.28459.228.2.1.122
Subnet Mask (4 of 4)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName1 1.3.6.1.4.1.28459.228.2.1.208
Controller Name or Description (1 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName2 1.3.6.1.4.1.28459.228.2.1.209
Controller Name or Description (2 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName3 1.3.6.1.4.1.28459.228.2.1.210
Controller Name or Description (3 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName4 1.3.6.1.4.1.28459.228.2.1.211
Controller Name or Description (4 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName5 1.3.6.1.4.1.28459.228.2.1.212
Controller Name or Description (5 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName6 1.3.6.1.4.1.28459.228.2.1.213
Controller Name or Description (6 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName7 1.3.6.1.4.1.28459.228.2.1.214
Controller Name or Description (7 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName8 1.3.6.1.4.1.28459.228.2.1.215
Controller Name or Description (8 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName9 1.3.6.1.4.1.28459.228.2.1.216
Controller Name or Description (9 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName10 1.3.6.1.4.1.28459.228.2.1.217
Controller Name or Description (10 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName11 1.3.6.1.4.1.28459.228.2.1.218
Controller Name or Description (11 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName12 1.3.6.1.4.1.28459.228.2.1.219
Controller Name or Description (12 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName13 1.3.6.1.4.1.28459.228.2.1.220
Controller Name or Description (13 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName14 1.3.6.1.4.1.28459.228.2.1.221
Controller Name or Description (14 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName15 1.3.6.1.4.1.28459.228.2.1.222
Controller Name or Description (15 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName16 1.3.6.1.4.1.28459.228.2.1.223
Controller Name or Description (16 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName17 1.3.6.1.4.1.28459.228.2.1.224
Controller Name or Description (17 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName18 1.3.6.1.4.1.28459.228.2.1.225
Controller Name or Description (18 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName19 1.3.6.1.4.1.28459.228.2.1.226
Controller Name or Description (19 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName20 1.3.6.1.4.1.28459.228.2.1.227
Controller Name or Description (20 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName21 1.3.6.1.4.1.28459.228.2.1.228
Controller Name or Description (21 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName22 1.3.6.1.4.1.28459.228.2.1.229
Controller Name or Description (22 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName23 1.3.6.1.4.1.28459.228.2.1.230
Controller Name or Description (23 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName24 1.3.6.1.4.1.28459.228.2.1.231
Controller Name or Description (24 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName25 1.3.6.1.4.1.28459.228.2.1.232
Controller Name or Description (25 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName26 1.3.6.1.4.1.28459.228.2.1.233
Controller Name or Description (26 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName27 1.3.6.1.4.1.28459.228.2.1.234
Controller Name or Description (27 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName28 1.3.6.1.4.1.28459.228.2.1.235
Controller Name or Description (28 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName29 1.3.6.1.4.1.28459.228.2.1.236
Controller Name or Description (29 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName30 1.3.6.1.4.1.28459.228.2.1.237
Controller Name or Description (30 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName31 1.3.6.1.4.1.28459.228.2.1.238
Controller Name or Description (31 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName32 1.3.6.1.4.1.28459.228.2.1.239
Controller Name or Description (32 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName33 1.3.6.1.4.1.28459.228.2.1.240
Controller Name or Description (33 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName34 1.3.6.1.4.1.28459.228.2.1.241
Controller Name or Description (34 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName35 1.3.6.1.4.1.28459.228.2.1.242
Controller Name or Description (35 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName36 1.3.6.1.4.1.28459.228.2.1.243
Controller Name or Description (36 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName37 1.3.6.1.4.1.28459.228.2.1.244
Controller Name or Description (37 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName38 1.3.6.1.4.1.28459.228.2.1.245
Controller Name or Description (38 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName39 1.3.6.1.4.1.28459.228.2.1.246
Controller Name or Description (39 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName40 1.3.6.1.4.1.28459.228.2.1.247
Controller Name or Description (40 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName41 1.3.6.1.4.1.28459.228.2.1.248
Controller Name or Description (41 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName42 1.3.6.1.4.1.28459.228.2.1.249
Controller Name or Description (42 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName43 1.3.6.1.4.1.28459.228.2.1.250
Controller Name or Description (43 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName44 1.3.6.1.4.1.28459.228.2.1.251
Controller Name or Description (44 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName45 1.3.6.1.4.1.28459.228.2.1.252
Controller Name or Description (45 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName46 1.3.6.1.4.1.28459.228.2.1.253
Controller Name or Description (46 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName47 1.3.6.1.4.1.28459.228.2.1.254
Controller Name or Description (47 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName48 1.3.6.1.4.1.28459.228.2.1.255
Controller Name or Description (48 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName49 1.3.6.1.4.1.28459.228.2.1.256
Controller Name or Description (49 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName50 1.3.6.1.4.1.28459.228.2.1.257
Controller Name or Description (50 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName51 1.3.6.1.4.1.28459.228.2.1.258
Controller Name or Description (51 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName52 1.3.6.1.4.1.28459.228.2.1.259
Controller Name or Description (52 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName53 1.3.6.1.4.1.28459.228.2.1.260
Controller Name or Description (53 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName54 1.3.6.1.4.1.28459.228.2.1.261
Controller Name or Description (54 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regControllerName55 1.3.6.1.4.1.28459.228.2.1.262
Controller Name or Description (55 of 55)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regClockYear 1.3.6.1.4.1.28459.228.2.1.263
Clock Year
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regClockMonth 1.3.6.1.4.1.28459.228.2.1.264
Clock Month (1-12)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regClockDay 1.3.6.1.4.1.28459.228.2.1.265
Clock Day of Month (1-31)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regClockHour 1.3.6.1.4.1.28459.228.2.1.266
Clock Hour (0-23)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regClockMinute 1.3.6.1.4.1.28459.228.2.1.267
Clock Minute (0-59)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regClockSecond 1.3.6.1.4.1.28459.228.2.1.268
Clock Second (0-59)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regDataLoggingInterval 1.3.6.1.4.1.28459.228.2.1.269
Data Logging Interval in Seconds (1 - 3600)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regRelay1 1.3.6.1.4.1.28459.228.2.1.280
Relay 1, write zero for off, any non-zero value for on
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regRelay2 1.3.6.1.4.1.28459.228.2.1.281
Relay 2, write zero for off, any non-zero value for on
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regBatteryLowAlarmEnable 1.3.6.1.4.1.28459.228.2.1.290
Battery Voltage Low Alarm Enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regBatteryLowTriggerVoltage 1.3.6.1.4.1.28459.228.2.1.291
Battery Voltage Low Alarm Trigger Voltage, 1/100th volt steps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regBatteryLowResetVoltage 1.3.6.1.4.1.28459.228.2.1.292
Battery Voltage Low Alarm Reset Voltage
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regBatteryHighAlarmEnable 1.3.6.1.4.1.28459.228.2.1.293
Battery Voltage High Alarm Enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regBatteryHighTriggerVoltage 1.3.6.1.4.1.28459.228.2.1.294
Battery Voltage High Alarm Trigger Voltage
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regBatteryHighResetVoltage 1.3.6.1.4.1.28459.228.2.1.295
Battery Voltage High Alarm Reset Voltage
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regTemperatureLowAlarmEnable 1.3.6.1.4.1.28459.228.2.1.296
Temperature Low Alarm Enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regTemperatureLowTrigger 1.3.6.1.4.1.28459.228.2.1.297
Temperature Low Alarm Trigger Temperature, 1/10th degree C steps, signed
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regTemperatureLowReset 1.3.6.1.4.1.28459.228.2.1.298
Temperature Low Alarm Reset Temperature
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regTemperatureHighAlarmEnable 1.3.6.1.4.1.28459.228.2.1.299
Temperature High Alarm Enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regTemperatureHighTrigger 1.3.6.1.4.1.28459.228.2.1.300
Temperature High Alarm Trigger Temperature
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regTemperatureHighReset 1.3.6.1.4.1.28459.228.2.1.301
Temperature High Alarm Reset Temperature
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1LowAlarmEnable 1.3.6.1.4.1.28459.228.2.1.302
Analog 1 Low Alarm Enable, 0 = disabled, 1 = 0-32V, 2 = 0-5V, 3 = 4-20mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1LowTriggerVoltage 1.3.6.1.4.1.28459.228.2.1.303
Analog 1 Low Alarm Trigger Voltage, 1/100th volt steps or Current 1/100th mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1LowResetVoltage 1.3.6.1.4.1.28459.228.2.1.304
Analog 1 Low Alarm Reset Voltage or Current
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1HighAlarmEnable 1.3.6.1.4.1.28459.228.2.1.305
Analog 1 High Alarm Enable, 0 = disabled, 1 = 0-32V, 2 = 0-5V, 3 = 4-20mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1HighTriggerVoltage 1.3.6.1.4.1.28459.228.2.1.306
Analog 1 High Alarm Trigger Voltage or Current
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1HighResetVoltage 1.3.6.1.4.1.28459.228.2.1.307
Analog 1 High Alarm Reset Voltage or Current
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2LowAlarmEnable 1.3.6.1.4.1.28459.228.2.1.308
Analog 2 Low Alarm Enable, 0 = disabled, 1 = 0-32V, 2 = 0-5V, 3 = 4-20mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2LowTriggerVoltage 1.3.6.1.4.1.28459.228.2.1.309
Analog 2 Low Alarm Trigger Voltage or Current
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2LowResetVoltage 1.3.6.1.4.1.28459.228.2.1.310
Analog 2 Low Alarm Reset Voltage or Current
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2HighAlarmEnable 1.3.6.1.4.1.28459.228.2.1.311
Analog 2 High Alarm Enable, 0 = disabled, 1 = 0-32V, 2 = 0-5V, 3 = 4-20mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2HighTriggerVoltage 1.3.6.1.4.1.28459.228.2.1.312
Analog 2 High Alarm Trigger Voltage or Current
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2HighResetVoltage 1.3.6.1.4.1.28459.228.2.1.313
Analog 2 High Alarm Reset Voltage or Current
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regDigital1TriggeredAlarmEnable 1.3.6.1.4.1.28459.228.2.1.362
Digital 1 Triggered Alarm Enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regDigital1TriggeredCycle 1.3.6.1.4.1.28459.228.2.1.363
Digital 1 Triggered Alarm Cycle Time in minutes, 0 = no cycle just one shot alarm on edge
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regDigital1OpenAlarmEnable 1.3.6.1.4.1.28459.228.2.1.364
Digital 1 Open Alarm Enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regDigital1OpenCycle 1.3.6.1.4.1.28459.228.2.1.365
Digital 1 Open Alarm Cycle Time in minutes
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regDigital2TriggeredAlarmEnable 1.3.6.1.4.1.28459.228.2.1.366
Digital 2 Triggered Alarm Enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regDigital2TriggeredCycle 1.3.6.1.4.1.28459.228.2.1.367
Digital 2 Triggered Alarm Cycle Time in minutes
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regDigital2OpenAlarmEnable 1.3.6.1.4.1.28459.228.2.1.368
Digital 2 Open Alarm Enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regDigital2OpenCycle 1.3.6.1.4.1.28459.228.2.1.369
Digital 2 Open Alarm Cycle Time in minutes
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regHardwareAlarmEnable 1.3.6.1.4.1.28459.228.2.1.402
Hardware Alarm Enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regHardwareAlarmCycle 1.3.6.1.4.1.28459.228.2.1.403
Hardware Alarm Cycle Time in minutes, 0 = one shot
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regBatteryZeroPoint 1.3.6.1.4.1.28459.228.2.1.410
Battery A/D Zero Point, a dummy write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regBatteryMidPoint 1.3.6.1.4.1.28459.228.2.1.411
Battery A/D Mid Point, a write to the following register causes calibration of this point
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regBatteryMidPointVoltage 1.3.6.1.4.1.28459.228.2.1.412
Battery A/D Mid Point Voltage, a write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1ZeroPoint32V 1.3.6.1.4.1.28459.228.2.1.413
Analog 1 A/D 0-32V Zero Point, a dummy write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1MidPoint32V 1.3.6.1.4.1.28459.228.2.1.414
Analog 1 A/D 0-32V Mid Point, a write to the following register causes calibration of this point
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog1MidPointVoltage32V 1.3.6.1.4.1.28459.228.2.1.415
Analog 1 A/D 0-32V Mid Point Voltage, a write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1ZeroPoint5V 1.3.6.1.4.1.28459.228.2.1.416
Analog 1 A/D 0-5V Zero Point, a dummy write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1MidPoint5V 1.3.6.1.4.1.28459.228.2.1.417
Analog 1 A/D 0-5V Mid Point, a write to the following register causes calibration of this point
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog1MidPointVoltage5V 1.3.6.1.4.1.28459.228.2.1.418
Analog 1 A/D 0-5V Mid Point Voltage, a write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1ZeroPoint420mA 1.3.6.1.4.1.28459.228.2.1.419
Analog 1 A/D 4-20mA Zero Point, a dummy write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog1MidPoint420mA 1.3.6.1.4.1.28459.228.2.1.420
Analog 1 A/D 4-20mA Mid Point, a write to the following register causes calibration of this point
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog1MidPointCurrent420mA 1.3.6.1.4.1.28459.228.2.1.421
Analog 1 A/D 4-20mA Mid Point Current, a write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2ZeroPoint32V 1.3.6.1.4.1.28459.228.2.1.422
Analog 2 A/D 0-32V Zero Point, a dummy write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2MidPoint32V 1.3.6.1.4.1.28459.228.2.1.423
Analog 2 A/D 0-32V Mid Point, a write to the following register causes calibration of this point
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog2MidPointVoltage32V 1.3.6.1.4.1.28459.228.2.1.424
Analog 2 A/D 0-32V Mid Point Voltage, a write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2ZeroPoint5V 1.3.6.1.4.1.28459.228.2.1.425
Analog 2 A/D 0-5V Zero Point, a dummy write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2MidPoint5V 1.3.6.1.4.1.28459.228.2.1.426
Analog 2 A/D 0-5V Mid Point, a write to the following register causes calibration of this point
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog2MidPointVoltage5V 1.3.6.1.4.1.28459.228.2.1.427
Analog 2 A/D 0-5V Mid Point Voltage, a write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2ZeroPoint420mA 1.3.6.1.4.1.28459.228.2.1.428
Analog 2 A/D 4-20mA Zero Point, a dummy write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAnalog2MidPoint420mA 1.3.6.1.4.1.28459.228.2.1.429
Analog 2 A/D 4-20mA Mid Point, a write to the following register causes calibration of this point
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog2MidPointCurrent420mA 1.3.6.1.4.1.28459.228.2.1.430
Analog 2 A/D 4-20mA Mid Point Current, a write here causes calibration of this point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regForceBuffers 1.3.6.1.4.1.28459.228.2.1.500
Force buffers to be written to flash - write any non-zero value. If not used, flash will only be updated when necessary in order to increase its lifetime (data may be lost in a power failure).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionBatLowTrigger 1.3.6.1.4.1.28459.228.2.1.600
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionBatLowReset 1.3.6.1.4.1.28459.228.2.1.601
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionBatHighTrigger 1.3.6.1.4.1.28459.228.2.1.602
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionBatHighReset 1.3.6.1.4.1.28459.228.2.1.603
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionTempLowTrigger 1.3.6.1.4.1.28459.228.2.1.604
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionTempLowReset 1.3.6.1.4.1.28459.228.2.1.605
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionTempHighTrigger 1.3.6.1.4.1.28459.228.2.1.606
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionTempHighReset 1.3.6.1.4.1.28459.228.2.1.607
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionAIN1LowTrigger 1.3.6.1.4.1.28459.228.2.1.608
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionAIN1LowReset 1.3.6.1.4.1.28459.228.2.1.609
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionAIN1HighTrigger 1.3.6.1.4.1.28459.228.2.1.610
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionAIN1HighReset 1.3.6.1.4.1.28459.228.2.1.611
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionAIN2LowTrigger 1.3.6.1.4.1.28459.228.2.1.612
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionAIN2LowReset 1.3.6.1.4.1.28459.228.2.1.613
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionAIN2HighTrigger 1.3.6.1.4.1.28459.228.2.1.614
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionAIN2HighReset 1.3.6.1.4.1.28459.228.2.1.615
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionDIN1Trigger 1.3.6.1.4.1.28459.228.2.1.648
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionDIN1Reset 1.3.6.1.4.1.28459.228.2.1.649
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionDIN2Trigger 1.3.6.1.4.1.28459.228.2.1.650
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmActionDIN2Reset 1.3.6.1.4.1.28459.228.2.1.651
Action 0=No Action,1=R1 On,2=R1 Off,3=R2 On,4=R2 Off
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regBatteryVoltage 1.3.6.1.4.1.28459.228.2.1.1000
Battery Voltage, 1/100th Volt steps
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regTemperature 1.3.6.1.4.1.28459.228.2.1.1001
Temperature, 1/10th degree C steps, signed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog132V 1.3.6.1.4.1.28459.228.2.1.1002
Analog 1, 1/100th Volt steps, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog15V 1.3.6.1.4.1.28459.228.2.1.1003
Analog 1, 1/100th Volt steps, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog1420mA 1.3.6.1.4.1.28459.228.2.1.1004
Analog 1, 1/100th mA steps, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog232V 1.3.6.1.4.1.28459.228.2.1.1005
Analog 2, 1/100th Volt steps, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog25V 1.3.6.1.4.1.28459.228.2.1.1006
Analog 2, 1/100th Volt steps, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAnalog2420mA 1.3.6.1.4.1.28459.228.2.1.1007
Analog 2, 1/100th mA steps, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regDigital1 1.3.6.1.4.1.28459.228.2.1.1100
Digital 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regDigital2 1.3.6.1.4.1.28459.228.2.1.1101
Digital 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogPointCountHigh 1.3.6.1.4.1.28459.228.2.1.1200
Number of stored Log data points, long integer, MSWord
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogPointCountLow 1.3.6.1.4.1.28459.228.2.1.1201
Number of stored Log data points, long integer, LSWord
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAlarmPointCount 1.3.6.1.4.1.28459.228.2.1.1204
Number of stored Alarm data points
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regRelayPointCount 1.3.6.1.4.1.28459.228.2.1.1205
Number of stored Relay data points
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regCurrentLogPointHigh 1.3.6.1.4.1.28459.228.2.1.1300
Current Log data point, MSWord. Write here to select what registers 1400 - 1499 will read. Zero will select the earliest data point.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regCurrentLogPointLow 1.3.6.1.4.1.28459.228.2.1.1301
Current Log data point, LSWord. Write here to select what registers 1400 - 1499 will read. Zero will select the earliest data point.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regCurrentAlarmPoint 1.3.6.1.4.1.28459.228.2.1.1304
Current Alarm data point. Write here to select what registers 1500 - 1599 will read.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regCurrentRelayPoint 1.3.6.1.4.1.28459.228.2.1.1305
Current Relay data point. Write here to select what registers 1600 - 1699 will read.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regEraseLogData 1.3.6.1.4.1.28459.228.2.1.1350
Erase Log Data - Any non-zero write here will erase the log data.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regEraseAlarmData 1.3.6.1.4.1.28459.228.2.1.1351
Erase Alarm Data - Any non-zero write here will erase the alarm data.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regEraseRelayData 1.3.6.1.4.1.28459.228.2.1.1352
Erase Relay Data - Any non-zero write here will erase the relay data.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regLogDateYear 1.3.6.1.4.1.28459.228.2.1.1400
Current Log Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogDateMonth 1.3.6.1.4.1.28459.228.2.1.1401
Current Log Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogDateDay 1.3.6.1.4.1.28459.228.2.1.1402
Current Log Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogDateHour 1.3.6.1.4.1.28459.228.2.1.1403
Current Log Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogDateMinute 1.3.6.1.4.1.28459.228.2.1.1404
Current Log Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogDateSecond 1.3.6.1.4.1.28459.228.2.1.1405
Current Log Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogBatteryVoltage 1.3.6.1.4.1.28459.228.2.1.1406
Current Log Point, Battery Voltage x 100
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogTemperature 1.3.6.1.4.1.28459.228.2.1.1407
Current Log Point, Temperature degrees C x 10, signed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogAnalog132V 1.3.6.1.4.1.28459.228.2.1.1408
Current Log Point, Analog 1, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogAnalog15V 1.3.6.1.4.1.28459.228.2.1.1409
Current Log Point, Analog 1, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogAnalog1420mA 1.3.6.1.4.1.28459.228.2.1.1410
Current Log Point, Analog 1, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogAnalog232V 1.3.6.1.4.1.28459.228.2.1.1411
Current Log Point, Analog 2, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogAnalog25V 1.3.6.1.4.1.28459.228.2.1.1412
Current Log Point, Analog 2, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogAnalog2420mA 1.3.6.1.4.1.28459.228.2.1.1413
Current Log Point, Analog 2, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogDigital1 1.3.6.1.4.1.28459.228.2.1.1414
Current Log Point, Digital 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLogDigital2 1.3.6.1.4.1.28459.228.2.1.1415
Current Log Point, Digital 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAdvanceLog 1.3.6.1.4.1.28459.228.2.1.1416
Advance Log Register - If this is read, it will increment the current log pointer to the next point.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regDecrementLog 1.3.6.1.4.1.28459.228.2.1.1417
Decrement Log Register - If this is written non-zero, it will move the log pointer back a point.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regAlarmDateYear 1.3.6.1.4.1.28459.228.2.1.1500
Current Alarm Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAlarmDateMonth 1.3.6.1.4.1.28459.228.2.1.1501
Current Alarm Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAlarmDateDay 1.3.6.1.4.1.28459.228.2.1.1502
Current Alarm Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAlarmDateHour 1.3.6.1.4.1.28459.228.2.1.1503
Current Alarm Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAlarmDateMinute 1.3.6.1.4.1.28459.228.2.1.1504
Current Alarm Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAlarmDateSecond 1.3.6.1.4.1.28459.228.2.1.1505
Current Alarm Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAlarmID 1.3.6.1.4.1.28459.228.2.1.1506
Current Alarm Point, Alarm Identifier
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAdvanceAlarm 1.3.6.1.4.1.28459.228.2.1.1507
Advance Alarm Register - If this is read, it will increment the current alarm pointer.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regDecrementAlarm 1.3.6.1.4.1.28459.228.2.1.1508
Decrement Alarm Register - If this is written non-zero, it will move the alarm pointer back a point.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regRelayDateYear 1.3.6.1.4.1.28459.228.2.1.1600
Current Relay Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regRelayDateMonth 1.3.6.1.4.1.28459.228.2.1.1601
Current Relay Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regRelayDateDay 1.3.6.1.4.1.28459.228.2.1.1602
Current Relay Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regRelayDateHour 1.3.6.1.4.1.28459.228.2.1.1603
Current Relay Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regRelayDateMinute 1.3.6.1.4.1.28459.228.2.1.1604
Current Relay Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regRelayDateSecond 1.3.6.1.4.1.28459.228.2.1.1605
Current Relay Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regRelayID 1.3.6.1.4.1.28459.228.2.1.1606
Current Relay Point, Relay Identifier
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regRelayPosition 1.3.6.1.4.1.28459.228.2.1.1607
Current Relay Point, Position, 0 = off, 0xFF00 = on
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAdvanceRelay 1.3.6.1.4.1.28459.228.2.1.1608
Advance Relay Register - If this is read, it will increment the current relay pointer.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regDecrementRelay 1.3.6.1.4.1.28459.228.2.1.1609
Decrement Relay Register - If this is written non-zero, it will move the relay pointer back a point.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

regLog1DateYear 1.3.6.1.4.1.28459.228.2.1.2000
Current Log Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1DateMonth 1.3.6.1.4.1.28459.228.2.1.2001
Current Log Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1DateDay 1.3.6.1.4.1.28459.228.2.1.2002
Current Log Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1DateHour 1.3.6.1.4.1.28459.228.2.1.2003
Current Log Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1DateMinute 1.3.6.1.4.1.28459.228.2.1.2004
Current Log Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1DateSecond 1.3.6.1.4.1.28459.228.2.1.2005
Current Log Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1BatteryVoltage 1.3.6.1.4.1.28459.228.2.1.2006
Current Log Point, Battery Voltage x 100
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1Temperature 1.3.6.1.4.1.28459.228.2.1.2007
Current Log Point, Temperature degrees C x 10, signed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1Analog132V 1.3.6.1.4.1.28459.228.2.1.2008
Current Log Point, Analog 1, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1Analog15V 1.3.6.1.4.1.28459.228.2.1.2009
Current Log Point, Analog 1, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1Analog1420mA 1.3.6.1.4.1.28459.228.2.1.2010
Current Log Point, Analog 1, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1Analog232V 1.3.6.1.4.1.28459.228.2.1.2011
Current Log Point, Analog 2, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1Analog25V 1.3.6.1.4.1.28459.228.2.1.2012
Current Log Point, Analog 2, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1Analog2420mA 1.3.6.1.4.1.28459.228.2.1.2013
Current Log Point, Analog 2, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1Digital1 1.3.6.1.4.1.28459.228.2.1.2014
Current Log Point, Digital 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog1Digital2 1.3.6.1.4.1.28459.228.2.1.2015
Current Log Point, Digital 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2DateYear 1.3.6.1.4.1.28459.228.2.1.2016
2nd Log Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2DateMonth 1.3.6.1.4.1.28459.228.2.1.2017
2nd Log Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2DateDay 1.3.6.1.4.1.28459.228.2.1.2018
2nd Log Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2DateHour 1.3.6.1.4.1.28459.228.2.1.2019
2nd Log Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2DateMinute 1.3.6.1.4.1.28459.228.2.1.2020
2nd Log Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2DateSecond 1.3.6.1.4.1.28459.228.2.1.2021
2nd Log Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2BatteryVoltage 1.3.6.1.4.1.28459.228.2.1.2022
2nd Log Point, Battery Voltage x 100
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2Temperature 1.3.6.1.4.1.28459.228.2.1.2023
2nd Log Point, Temperature degrees C x 10, signed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2Analog132V 1.3.6.1.4.1.28459.228.2.1.2024
2nd Log Point, Analog 1, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2Analog15V 1.3.6.1.4.1.28459.228.2.1.2025
2nd Log Point, Analog 1, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2Analog1420mA 1.3.6.1.4.1.28459.228.2.1.2026
2nd Log Point, Analog 1, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2Analog232V 1.3.6.1.4.1.28459.228.2.1.2027
2nd Log Point, Analog 2, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2Analog25V 1.3.6.1.4.1.28459.228.2.1.2028
2nd Log Point, Analog 2, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2Analog2420mA 1.3.6.1.4.1.28459.228.2.1.2029
2nd Log Point, Analog 2, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2Digital1 1.3.6.1.4.1.28459.228.2.1.2030
2nd Log Point, Digital 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog2Digital2 1.3.6.1.4.1.28459.228.2.1.2031
2nd Log Point, Digital 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3DateYear 1.3.6.1.4.1.28459.228.2.1.2032
3rd Log Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3DateMonth 1.3.6.1.4.1.28459.228.2.1.2033
3rd Log Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3DateDay 1.3.6.1.4.1.28459.228.2.1.2034
3rd Log Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3DateHour 1.3.6.1.4.1.28459.228.2.1.2035
3rd Log Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3DateMinute 1.3.6.1.4.1.28459.228.2.1.2036
3rd Log Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3DateSecond 1.3.6.1.4.1.28459.228.2.1.2037
3rd Log Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3BatteryVoltage 1.3.6.1.4.1.28459.228.2.1.2038
3rd Log Point, Battery Voltage x 100
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3Temperature 1.3.6.1.4.1.28459.228.2.1.2039
3rd Log Point, Temperature degrees C x 10, signed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3Analog132V 1.3.6.1.4.1.28459.228.2.1.2040
3rd Log Point, Analog 1, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3Analog15V 1.3.6.1.4.1.28459.228.2.1.2041
3rd Log Point, Analog 1, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3Analog1420mA 1.3.6.1.4.1.28459.228.2.1.2042
3rd Log Point, Analog 1, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3Analog232V 1.3.6.1.4.1.28459.228.2.1.2043
3rd Log Point, Analog 2, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3Analog25V 1.3.6.1.4.1.28459.228.2.1.2044
3rd Log Point, Analog 2, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3Analog2420mA 1.3.6.1.4.1.28459.228.2.1.2045
3rd Log Point, Analog 2, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3Digital1 1.3.6.1.4.1.28459.228.2.1.2046
3rd Log Point, Digital 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog3Digital2 1.3.6.1.4.1.28459.228.2.1.2047
3rd Log Point, Digital 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4DateYear 1.3.6.1.4.1.28459.228.2.1.2048
4th Log Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4DateMonth 1.3.6.1.4.1.28459.228.2.1.2049
4th Log Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4DateDay 1.3.6.1.4.1.28459.228.2.1.2050
4th Log Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4DateHour 1.3.6.1.4.1.28459.228.2.1.2051
4th Log Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4DateMinute 1.3.6.1.4.1.28459.228.2.1.2052
4th Log Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4DateSecond 1.3.6.1.4.1.28459.228.2.1.2053
4th Log Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4BatteryVoltage 1.3.6.1.4.1.28459.228.2.1.2054
4th Log Point, Battery Voltage x 100
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4Temperature 1.3.6.1.4.1.28459.228.2.1.2055
4th Log Point, Temperature degrees C x 10, signed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4Analog132V 1.3.6.1.4.1.28459.228.2.1.2056
4th Log Point, Analog 1, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4Analog15V 1.3.6.1.4.1.28459.228.2.1.2057
4th Log Point, Analog 1, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4Analog1420mA 1.3.6.1.4.1.28459.228.2.1.2058
4th Log Point, Analog 1, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4Analog232V 1.3.6.1.4.1.28459.228.2.1.2059
4th Log Point, Analog 2, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4Analog25V 1.3.6.1.4.1.28459.228.2.1.2060
4th Log Point, Analog 2, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4Analog2420mA 1.3.6.1.4.1.28459.228.2.1.2061
4th Log Point, Analog 2, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4Digital1 1.3.6.1.4.1.28459.228.2.1.2062
4th Log Point, Digital 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog4Digital2 1.3.6.1.4.1.28459.228.2.1.2063
4th Log Point, Digital 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5DateYear 1.3.6.1.4.1.28459.228.2.1.2064
5th Log Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5DateMonth 1.3.6.1.4.1.28459.228.2.1.2065
5th Log Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5DateDay 1.3.6.1.4.1.28459.228.2.1.2066
5th Log Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5DateHour 1.3.6.1.4.1.28459.228.2.1.2067
5th Log Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5DateMinute 1.3.6.1.4.1.28459.228.2.1.2068
5th Log Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5DateSecond 1.3.6.1.4.1.28459.228.2.1.2069
5th Log Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5BatteryVoltage 1.3.6.1.4.1.28459.228.2.1.2070
5th Log Point, Battery Voltage x 100
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5Temperature 1.3.6.1.4.1.28459.228.2.1.2071
5th Log Point, Temperature degrees C x 10, signed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5Analog132V 1.3.6.1.4.1.28459.228.2.1.2072
5th Log Point, Analog 1, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5Analog15V 1.3.6.1.4.1.28459.228.2.1.2073
5th Log Point, Analog 1, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5Analog1420mA 1.3.6.1.4.1.28459.228.2.1.2074
5th Log Point, Analog 1, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5Analog232V 1.3.6.1.4.1.28459.228.2.1.2075
5th Log Point, Analog 2, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5Analog25V 1.3.6.1.4.1.28459.228.2.1.2076
5th Log Point, Analog 2, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5Analog2420mA 1.3.6.1.4.1.28459.228.2.1.2077
5th Log Point, Analog 2, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5Digital1 1.3.6.1.4.1.28459.228.2.1.2078
5th Log Point, Digital 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog5Digital2 1.3.6.1.4.1.28459.228.2.1.2079
5th Log Point, Digital 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6DateYear 1.3.6.1.4.1.28459.228.2.1.2080
6th Log Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6DateMonth 1.3.6.1.4.1.28459.228.2.1.2081
6th Log Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6DateDay 1.3.6.1.4.1.28459.228.2.1.2082
6th Log Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6DateHour 1.3.6.1.4.1.28459.228.2.1.2083
6th Log Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6DateMinute 1.3.6.1.4.1.28459.228.2.1.2084
6th Log Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6DateSecond 1.3.6.1.4.1.28459.228.2.1.2085
6th Log Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6BatteryVoltage 1.3.6.1.4.1.28459.228.2.1.2086
6th Log Point, Battery Voltage x 100
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6Temperature 1.3.6.1.4.1.28459.228.2.1.2087
6th Log Point, Temperature degrees C x 10, signed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6Analog132V 1.3.6.1.4.1.28459.228.2.1.2088
6th Log Point, Analog 1, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6Analog15V 1.3.6.1.4.1.28459.228.2.1.2089
6th Log Point, Analog 1, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6Analog1420mA 1.3.6.1.4.1.28459.228.2.1.2090
6th Log Point, Analog 1, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6Analog232V 1.3.6.1.4.1.28459.228.2.1.2091
6th Log Point, Analog 2, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6Analog25V 1.3.6.1.4.1.28459.228.2.1.2092
6th Log Point, Analog 2, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6Analog2420mA 1.3.6.1.4.1.28459.228.2.1.2093
6th Log Point, Analog 2, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6Digital1 1.3.6.1.4.1.28459.228.2.1.2094
6th Log Point, Digital 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog6Digital2 1.3.6.1.4.1.28459.228.2.1.2095
6th Log Point, Digital 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7DateYear 1.3.6.1.4.1.28459.228.2.1.2096
7th Log Point, Year minus 2000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7DateMonth 1.3.6.1.4.1.28459.228.2.1.2097
7th Log Point, Month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7DateDay 1.3.6.1.4.1.28459.228.2.1.2098
7th Log Point, Day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7DateHour 1.3.6.1.4.1.28459.228.2.1.2099
7th Log Point, Hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7DateMinute 1.3.6.1.4.1.28459.228.2.1.2100
7th Log Point, Minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7DateSecond 1.3.6.1.4.1.28459.228.2.1.2101
7th Log Point, Second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7BatteryVoltage 1.3.6.1.4.1.28459.228.2.1.2102
7th Log Point, Battery Voltage x 100
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7Temperature 1.3.6.1.4.1.28459.228.2.1.2103
7th Log Point, Temperature degrees C x 10, signed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7Analog132V 1.3.6.1.4.1.28459.228.2.1.2104
7th Log Point, Analog 1, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7Analog15V 1.3.6.1.4.1.28459.228.2.1.2105
7th Log Point, Analog 1, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7Analog1420mA 1.3.6.1.4.1.28459.228.2.1.2106
7th Log Point, Analog 1, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7Analog232V 1.3.6.1.4.1.28459.228.2.1.2107
7th Log Point, Analog 2, 0 - 32 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7Analog25V 1.3.6.1.4.1.28459.228.2.1.2108
7th Log Point, Analog 2, 0 - 5 V
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7Analog2420mA 1.3.6.1.4.1.28459.228.2.1.2109
7th Log Point, Analog 2, 4 - 20 mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7Digital1 1.3.6.1.4.1.28459.228.2.1.2110
7th Log Point, Digital 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regLog7Digital2 1.3.6.1.4.1.28459.228.2.1.2111
7th Log Point, Digital 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regAdvance7Logs 1.3.6.1.4.1.28459.228.2.1.2112
Advance Log Register by 7 - If this is read, it will increment the current log pointer by 7.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

regDecrement7Logs 1.3.6.1.4.1.28459.228.2.1.2113
Decrement Log Register by 7 - If this is written non-zero, it will move the log pointer back 7 points.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

trapContents 1.3.6.1.4.1.28459.228.2.2.1
OBJECT IDENTIFIER    

valueTrapItem 1.3.6.1.4.1.28459.228.2.2.2
Trap Item structure.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  ValueTrapItem  

valueControllerID 1.3.6.1.4.1.28459.228.2.2.1.1
Unit Name or ID sending the trap.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString  

valueTrapDesc 1.3.6.1.4.1.28459.228.2.2.1.2
Short description of trap item.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString  

valueCurrentValue 1.3.6.1.4.1.28459.228.2.2.1.3
Current value of the item.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

trapInputLevel 1.3.6.1.4.1.28459.228.2.2.1
This trap is sent when an input with an associated value goes above or below a setpoint level if notifications are enabled for the object.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

trapSequenceInputLevel 1.3.6.1.4.1.28459.228.2.2.2
This trap is sent when an input with an associated value goes above or below a setpoint level if notifications are enabled for the object. Same as trapInputLevel, but sent as a sequence.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE