RUGGEDCOM-SYS-INFO-MIB

File: RUGGEDCOM-SYS-INFO-MIB.mib (29753 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
RUGGEDCOM-MIB

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
Integer32 TEXTUAL-CONVENTION TruthValue
DisplayString OBJECT-GROUP ruggedcomMgmt

Defined Types

RcHardwareStatus  
A status of a hardware module in the RuggedCom device.
TEXTUAL-CONVENTION    
  INTEGER notPresent(1), functional(2), notFunctional(3), notConnected(4)  

RcFanStatus  
The status of a fan-bank.
TEXTUAL-CONVENTION    
  INTEGER notPresent(1), failed(2), standby(3), off(4), on(5)  

RcHotswapModuleSlot  
A physical slot holding the hotswapable module (ROX 2 specific). As the value 0 is forbidden in SNMP enumerations, this value is the value 1 higher than some other ROX 2 slot values
TEXTUAL-CONVENTION    
  INTEGER pm1(1), lm1(2), lm2(3), lm3(4), cm(5), sm(6), lm4(7), lm5(8), lm6(9), pm2(10), main(11), em(12)  

RcHotswapModuleState  
A status of a hardware module in the RuggedCom device.
TEXTUAL-CONVENTION    
  INTEGER empty(1), disabled(2), resetting(3), operating(4), failed(5), unknown(255)  

RcMainBoard  
A main board type code. This textual convention will be updated any time when new main board type is developed.
TEXTUAL-CONVENTION    
  INTEGER rsMCPU2(1), rs400revB2(2), rmc30(3), rs900revB1F(4), rs900revB1noF(5), rs1600M(6), rs400revC1(7), rsG2100(8), rs900G(9), rsG2200(10), rs969(11), rs900v2F(12), rs900v2noF(13), rs416(15), rsRMC30Ksz80001(16), rs930(17), rs969v2(18), rs910(19), rs920(20), rs940G(21), rsi80x(22), rsG2300(23), rs416v2(24), rsg2288(25), rp110(26), rs900GP(27), rs900M(28), rs950G(29), rsG2488(61), rsG2488v2(62), rsG2488v3(63), rmc8388A(64), rmc8388B(65), rmc8388C(66), rsG920P(67), rsMCPU(255), rx1000(256), rx1100(257), rx1500(258), rx1501(259), rx1510(260), rx1511(261), rx1512(262), rx5000(263), mx5000(264), rx1400(265)  

Defined Values

rcSysInfo 1.3.6.1.4.1.15004.4.2
RuggedCom system information MIB.
MODULE-IDENTITY    

rcSysInfoConformance 1.3.6.1.4.1.15004.4.2.5
OBJECT IDENTIFIER    

rcSysInfoGroups 1.3.6.1.4.1.15004.4.2.5.2
OBJECT IDENTIFIER    

rcDeviceError 1.3.6.1.4.1.15004.4.2.1
The main subtree for various errors detected in RuggedCom devices.
Status: current Access: read-only
OBJECT-IDENTITY    

rcDeviceStatus 1.3.6.1.4.1.15004.4.2.2
The main subtree for various status information detected in RuggedCom devices.
Status: current Access: read-only
OBJECT-IDENTITY    

rcDeviceInfo 1.3.6.1.4.1.15004.4.2.3
The main subtree for RuggedCom devices manufacturing information.
Status: current Access: read-only
OBJECT-IDENTITY    

rcDeviceCommands 1.3.6.1.4.1.15004.4.2.4
The main subtree for device control commands.
Status: current Access: read-only
OBJECT-IDENTITY    

rcDeviceErrBootupError 1.3.6.1.4.1.15004.4.2.1.1
The error discovered during bootup process. If there was no error during device bootup, zero length string will be retreived.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDeviceErrWatchdogReset 1.3.6.1.4.1.15004.4.2.1.2
Indicates whether the last device reboot was caused by wachdog.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceErrConfigurationFailure 1.3.6.1.4.1.15004.4.2.1.3
Indicates whether errors were detected while applying configuration settings from configuration file. Configuration is updated from the configureation file at bootup time when file is loaded from nonvolatile memory, or when new file is downloaded to the device. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceErrCrashLogCreated 1.3.6.1.4.1.15004.4.2.1.4
Indicates whether the device error that caused creation of an entry in crashlog.txt file was detected. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceErrStackOverflow 1.3.6.1.4.1.15004.4.2.1.5
Indicates whether the stack of any of the system tasks is used over the system threshold. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceErrHeapError 1.3.6.1.4.1.15004.4.2.1.6
Indicates whether the system memory corruption was detected. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceErrDateAndTimeSetFailed 1.3.6.1.4.1.15004.4.2.1.7
Indicates whether the date and time setting in the device falied. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceErrNtpServerUnreachable 1.3.6.1.4.1.15004.4.2.1.8
Indicates whether the NTP server (if required) can be reached. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceErrBootPTftpTrFailed 1.3.6.1.4.1.15004.4.2.1.9
Indicates whether the the file was transfered properly after obtaining IP address from the BootP server. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceErrRadiusServerUnreachable 1.3.6.1.4.1.15004.4.2.1.10
Indicates whether the RADIUS server (if required) can be reached. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceErrTacacsServerUnreachable 1.3.6.1.4.1.15004.4.2.1.11
Indicates whether the TACACS+ server (if required) can be reached. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceStsCpuUsage 1.3.6.1.4.1.15004.4.2.2.1
The percentage in tenths of percent of available CPU cycles used for device operation as measured over the last second when object was retreived.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDeviceStsAvailableRam 1.3.6.1.4.1.15004.4.2.2.2
The total number of bytes of RAM still available in the system control CPU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDeviceStsTemperature 1.3.6.1.4.1.15004.4.2.2.3
The temperature measured in the device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDeviceStsPowerSupply1 1.3.6.1.4.1.15004.4.2.2.4
Indicates the status of Power Supply Module 1. Whenever the value of this object changes from functional(2) to notFunctional(3), or from notFunctionl(3) to functional(2), the device will generate powerSupplyTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  RcHardwareStatus  

rcDeviceStsPowerSupply2 1.3.6.1.4.1.15004.4.2.2.5
Indicates the status of Power Supply Module 2. Whenever the value of this object changes from functional(2) to notFunctional(3), or from notFunctionl(3) to functional(2), the device will generate powerSupplyTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  RcHardwareStatus  

rcDeviceStsCpuUsagePercent 1.3.6.1.4.1.15004.4.2.2.6
The percentage of available CPU cycles used for device operation as measured over the last second when object was retreived.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDeviceStsFailSafeRelay 1.3.6.1.4.1.15004.4.2.2.7
Indicates status of fail safe relay in the device. Fail safe relay is deEnergized(2) if there is at least one active alarm recorded in the device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER energized(1), deEnergized(2)  

rcDeviceStsErrorAlarm 1.3.6.1.4.1.15004.4.2.2.8
Indicates that at least one alarm of level ERROR, ALERT or CRITICAL is active in the device.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDeviceStsNoOfActiveAlarms 1.3.6.1.4.1.15004.4.2.2.9
Number of active alarms currently recorded in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDeviceStsFanBank1 1.3.6.1.4.1.15004.4.2.2.10
Indicates the status of Fan Bank Module 1.
Status: current Access: read-only
OBJECT-TYPE    
  RcFanStatus  

rcDeviceStsFanBank2 1.3.6.1.4.1.15004.4.2.2.11
Indicates the status of Fan Bank Module 2.
Status: current Access: read-only
OBJECT-TYPE    
  RcFanStatus  

rcDeviceStsPwdsWeak 1.3.6.1.4.1.15004.4.2.2.12
Indicates if any of passwords is configured as 'weak'. Change in the value of the bit in this object from '0' to '1' will generate weakPasswordTrap.
Status: current Access: read-only
OBJECT-TYPE    
  BITS adminPwd(0), operPwd(1), guestPwd(2)  

rcDeviceStsKeysDflt 1.3.6.1.4.1.15004.4.2.2.13
Indicates if any of secure services uses default keys and/or certificates. Customer is advised to update keys for secure services if defaults are used. Change in the value of the bit in this object from '0' to '1' will generate defaultKeysTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  BITS sshDfltKeys(0), sslDfltKeys(1)  

rcDeviceInfoSerialNumber 1.3.6.1.4.1.15004.4.2.3.1
The manufacturing serial number of the device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDeviceInfoBootSwVersion 1.3.6.1.4.1.15004.4.2.3.2
The version and the build date of the boot loader software.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDeviceInfoMainSwVersion 1.3.6.1.4.1.15004.4.2.3.3
The version and the build date of the main operating system software.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDeviceInfoMainBoardType 1.3.6.1.4.1.15004.4.2.3.4
The identification code of the device main board.
Status: current Access: read-only
OBJECT-TYPE    
  RcMainBoard  

rcDeviceInfoTotalRam 1.3.6.1.4.1.15004.4.2.3.5
The total number of bytes of RAM in the system control CPU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDeviceInfoPendingBootSwVersion 1.3.6.1.4.1.15004.4.2.3.6
The version and the build date of the boot loader software that has been loaded to the device and is pending reboot. Whenever the value of this object changes from zero-length string to any string of non-zero length, the device will generate swUpgradeTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDeviceInfoPendingMainSwVersion 1.3.6.1.4.1.15004.4.2.3.7
The version and the build date of the main operating system software that has been loaded to the device and is pending reboot. Whenever the value of this object changes from zero-length string to any string of non-zero length, the device will generate swUpgradeTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDeviceInfoCfgRevision 1.3.6.1.4.1.15004.4.2.3.8
The configuration file revision. The revision number will be updated whenever file is saved to the flash memory. This number is recorded in config.csv at the time file is uploaded from the device. Whenever the value of this object changes the device will generate cfgChangeTrap notification.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDeviceInfoMinBootSwVer 1.3.6.1.4.1.15004.4.2.3.9
The minimum version of the boot loader software required by ROS device. If this version is not newer than the version retreived as a value of object rcDeviceInfoBootSwVersion, trap bootVersionMismatchTrap will be generated.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDeviceCommReset 1.3.6.1.4.1.15004.4.2.4.1
Setting the value of this object to 'true(1)' will cause device to reboot. As a result of Read request the agent will return value 'false(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDeviceCommLoadDefaultCfg 1.3.6.1.4.1.15004.4.2.4.2
Setting the value of this object to 'true(1)' will force device to load default configuration to all tables. As a result of Read request the agent will return value 'false(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDeviceCommClearAlarms 1.3.6.1.4.1.15004.4.2.4.3
Setting the value of this object to 'true(1)' will cause device to clear all alarms. As a result of Read request the agent will return value 'false(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDeviceCommClearSyslog 1.3.6.1.4.1.15004.4.2.4.4
Setting the value of this object to 'true(1)' will cause device to clear syslog.txt file. As a result of Read request the agent will return value 'false(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDeviceCommClearLogs 1.3.6.1.4.1.15004.4.2.4.5
Setting the value of this object to 'true(1)' will cause device to clear syslog.txt and crashlog.txt files. As a result of Read request the agent will return value 'false(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDeviceCommIdentify 1.3.6.1.4.1.15004.4.2.4.6
Time Period in seconds for which the device should continue flashing the LEDs when possible so that device is visually recognized. Setting this value to any value greater than 0 will start LED flash timer on the device.Setting the value to 0 will stop the LED flash timer. On Read request agent always sends back the existing Timeout value for LED flash Timer.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300  

rcSysErrObjectsGroup 1.3.6.1.4.1.15004.4.2.5.2.1
A group of objects providing information about irregularities in the device.
Status: current Access: read-write
OBJECT-GROUP    

rcSysStsObjectsGroup 1.3.6.1.4.1.15004.4.2.5.2.2
A group of objects providing information device resources.
Status: current Access: read-write
OBJECT-GROUP    

rcSysStsObjectsTemperatureGroup 1.3.6.1.4.1.15004.4.2.5.2.3
This group is created to allow MIBs for products that do not have temperature sensore installed to exclude rcDeviceStsTemperature object.
Status: current Access: read-write
OBJECT-GROUP    

rcSysStsPowerSupplyGroup 1.3.6.1.4.1.15004.4.2.5.2.4
A group of objects providing information about power supply modules in the device. This group is mandatory for products with redundant power supply.
Status: current Access: read-write
OBJECT-GROUP    

rcSysInfoDeviceInfoGroup 1.3.6.1.4.1.15004.4.2.5.2.5
A group of object providing manufacturer's information about product's main board hardware, software, identification.
Status: current Access: read-write
OBJECT-GROUP    

rcSysDeviceCommGroup 1.3.6.1.4.1.15004.4.2.5.2.6
A group of object providing device control commands.
Status: current Access: read-write
OBJECT-GROUP    

rcSysDeviceCommIdentifyGroup 1.3.6.1.4.1.15004.4.2.5.2.7
A group of object providing device control commands for visual recognisation of the device (LED flashing).
Status: current Access: read-write
OBJECT-GROUP    

rcSysStsObjectsGroup1 1.3.6.1.4.1.15004.4.2.5.2.8
A group of objects providing information device resources.
Status: current Access: read-write
OBJECT-GROUP    

rcSysStsFanBankGroup 1.3.6.1.4.1.15004.4.2.5.2.9
A group of objects providing information about fan bank modules in the device. This group is mandatory for products with redundant fan banks.
Status: current Access: read-write
OBJECT-GROUP    

rcSysDeviceSecurityGroup 1.3.6.1.4.1.15004.4.2.5.2.10
A group of object providing device control commands.
Status: current Access: read-write
OBJECT-GROUP    

rcSysDeviceSecurityGroup01 1.3.6.1.4.1.15004.4.2.5.2.11
A group of object providing device control commands.
Status: current Access: read-write
OBJECT-GROUP