RUCKUS-SZ-CONFIG-WLAN-MIB

File: RUCKUS-SZ-CONFIG-WLAN-MIB.mib (8812 bytes)

Imported modules

RUCKUS-ROOT-MIB RUCKUS-TC-MIB SNMPv2-TC
SNMPv2-CONF IANAifType-MIB SNMPv2-SMI
IPV6-TC

Imported symbols

ruckusZDWLANModule RuckusAdminStatus RuckusRadioMode
RuckusSSID RuckusdB RuckusRateLimiting
DisplayString MacAddress RowStatus
PhysAddress TruthValue OBJECT-GROUP
IANAifType MODULE-IDENTITY OBJECT-TYPE
Counter32 Integer32 Unsigned32
IpAddress Ipv6Address

Defined Types

RuckusSZConfigWLANEntry  
SEQUENCE    
  ruckusSZConfigWLANID INTEGER
  ruckusSZConfigWLANSSID OCTET STRING
  ruckusSZConfigWLANDescription DisplayString
  ruckusSZConfigWLANName OCTET STRING
  ruckusSZConfigWLANWLANServiceType INTEGER
  ruckusSZConfigWLANAuthentication INTEGER
  ruckusSZConfigWLANEncryption INTEGER
  ruckusSZConfigWLANWEPKeyIndex INTEGER
  ruckusSZConfigWLANWEPKey OCTET STRING
  ruckusSZConfigWLANWPACipherType INTEGER
  ruckusSZConfigWLANWPAKey OCTET STRING
  ruckusSZConfigWLANWirelessClientIsolation INTEGER
  ruckusSZConfigWLANZeroITActivation INTEGER
  ruckusSZConfigWLANServicePriority INTEGER
  ruckusSZConfigWLANAccountingUpdateInterval INTEGER
  ruckusSZConfigWLANVlanID INTEGER
  ruckusSZConfigWLANHideSSID INTEGER
  ruckusSZConfigWLANMaxClientsPerAP INTEGER

Defined Values

ruckusSZConfigWLANMIB 1.3.6.1.4.1.25053.1.2.2.2
Ruckus WLAN mib
MODULE-IDENTITY    

ruckusSZConfigWLANObjects 1.3.6.1.4.1.25053.1.2.2.2.1
OBJECT IDENTIFIER    

ruckusSZConfigWLAN 1.3.6.1.4.1.25053.1.2.2.2.1.1
OBJECT IDENTIFIER    

ruckusSZConfigWLANTable 1.3.6.1.4.1.25053.1.2.2.2.1.1.1
SZ WLAN table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RuckusSZConfigWLANEntry

ruckusSZConfigWLANEntry 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1
Specifies each SZ WLAN configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RuckusSZConfigWLANEntry  

ruckusSZConfigWLANID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.1
this Wireless LAN(WLAN) ID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

ruckusSZConfigWLANSSID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.2
SSID for this Wireless LAN.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2..32)  

ruckusSZConfigWLANDescription 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.3
Description for this Wireless LAN.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

ruckusSZConfigWLANName 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.4
Name for this Wireless LAN
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2..32)  

ruckusSZConfigWLANWLANServiceType 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.8
The the Service type for the Wireless LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standardUsage(1), hotspot(2), guest(3), webauth(4), hotspot20(5), hotspot20-osen(6)  

ruckusSZConfigWLANAuthentication 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.10
Authentication method choosen for this Wireless LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER open(1), eap(2), mac-address(3)  

ruckusSZConfigWLANEncryption 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.12
Encryption method choosen for this Wireless LAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wpa2(1), wpa-Mixed(2), wep-64(3), wep-128(4), none-enc(5)  

ruckusSZConfigWLANWEPKeyIndex 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.15
Select the WEP key index for the WEP encryption.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

ruckusSZConfigWLANWEPKey 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.16
Enter the Pass-phrase for the WEP encryption method. Only 10 or 26 Hex character.such as: 1122334455
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(10|26)  

ruckusSZConfigWLANWPACipherType 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.20
Enter the encryption cipher method for the WPA encryption. fpr WPA2,aes is only supported.null is only for read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER aes(1), tkipaes(2), null(3)  

ruckusSZConfigWLANWPAKey 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.21
Enter the Pass-phrase for the WPA encryption. Specifies the WPA PSK (Wi-Fi Protected Access Pre Shared key) If the key length is 64 then all 64 characters should be in hex, otherwise the key assumed to be ascii.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8..63|64)  

ruckusSZConfigWLANWirelessClientIsolation 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.28
set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet. for Guest and webauth WLAN type, it must be 'enable'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ruckusSZConfigWLANZeroITActivation 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.30
Enable the Zero IT Activation Service of the Wireless LAN or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ruckusSZConfigWLANServicePriority 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.32
Select the QOS service priority for the Wireless LAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER high(1), low(2)  

ruckusSZConfigWLANAccountingUpdateInterval 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.36
Enter interval in minutes to update Accounting Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

ruckusSZConfigWLANVlanID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.45
Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

ruckusSZConfigWLANHideSSID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.50
Hide SSID, not to broadcast it SSID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ruckusSZConfigWLANMaxClientsPerAP 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.55
Select the Number of client devices the AP can service for the Wireless LAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..512