RS232-MIB

File: RS232-MIB.mib (22604 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

experimental Counter OBJECT-TYPE

Defined Types

Rs232PortEntry  
SEQUENCE    
  rs232PortIndex INTEGER
  rs232PortType INTEGER
  rs232PortInSigNumber INTEGER
  rs232PortOutSigNumber INTEGER
  rs232PortInSpeed INTEGER
  rs232PortOutSpeed INTEGER

Rs232AsyncPortEntry  
SEQUENCE    
  rs232AsyncPortIndex INTEGER
  rs232AsyncPortBits INTEGER
  rs232AsyncPortStopBits INTEGER
  rs232AsyncPortParity INTEGER
  rs232AsyncPortAutobaud INTEGER
  rs232AsyncPortParityErrs Counter
  rs232AsyncPortFramingErrs Counter
  rs232AsyncPortOverrunErrs Counter

Rs232SyncPortEntry  
SEQUENCE    
  rs232SyncPortIndex INTEGER
  rs232SyncPortClockSource INTEGER
  rs232SyncPortFrameCheckErrs Counter
  rs232SyncPortTransmitUnderrunErrs Counter
  rs232SyncPortReceiveOverrunErrs Counter
  rs232SyncPortInterruptedFrames Counter
  rs232SyncPortAbortedFrames Counter

Rs232InSigEntry  
SEQUENCE    
  rs232InSigPortIndex INTEGER
  rs232InSigName INTEGER
  rs232InSigState INTEGER
  rs232InSigChanges Counter

Rs232OutSigEntry  
SEQUENCE    
  rs232OutSigPortIndex INTEGER
  rs232OutSigName INTEGER
  rs232OutSigState INTEGER
  rs232OutSigChanges Counter

Defined Values

rs232 1.3.6.1.3.20
OBJECT IDENTIFIER    

rs232Number 1.3.6.1.3.20.1
The number of ports (regardless of their current state) in the RS-232-like general port table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rs232PortTable 1.3.6.1.3.20.2
A list of port entries. The number of entries is given by the value of rs232Number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232PortEntry

rs232PortEntry 1.3.6.1.3.20.2.1
Status and parameter values for a port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rs232PortEntry  

rs232PortIndex 1.3.6.1.3.20.2.1.1
A unique value for each port. Its value ranges between 1 and the value of rs232Number. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rs232PortType 1.3.6.1.3.20.2.1.2
The port's hardware type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), rs232(2), rs422(3), rs423(4), v35(5)  

rs232PortInSigNumber 1.3.6.1.3.20.2.1.3
The number of input signals for the port in the input signal table (rs232PortInSigTable). The table contains entries only for those signals the software can detect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rs232PortOutSigNumber 1.3.6.1.3.20.2.1.4
The number of output signals for the port in the output signal table (rs232PortOutSigTable). The table contains entries only for those signals the software can assert.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rs232PortInSpeed 1.3.6.1.3.20.2.1.5
The port's input speed in bits per second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rs232PortOutSpeed 1.3.6.1.3.20.2.1.6
The port's output speed in bits per second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rs232AsyncPortTable 1.3.6.1.3.20.3
A list of asynchronous port entries. The maximum entry number is given by the value of rs232Number. Entries need not exist for synchronous ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232AsyncPortEntry

rs232AsyncPortEntry 1.3.6.1.3.20.3.1
Status and parameter values for an asynchronous port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rs232AsyncPortEntry  

rs232AsyncPortIndex 1.3.6.1.3.20.3.1.1
A unique value for each port. Its value is the same as rs232PortIndex for the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rs232AsyncPortBits 1.3.6.1.3.20.3.1.2
The port's number of bits in a character.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..8  

rs232AsyncPortStopBits 1.3.6.1.3.20.3.1.3
The port's number of stop bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), one-and-half(3), dynamic(4)  

rs232AsyncPortParity 1.3.6.1.3.20.3.1.4
The port's sense of a character parity bit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

rs232AsyncPortAutobaud 1.3.6.1.3.20.3.1.5
A control for the port's ability to automatically sense input speed. When rs232PortAutoBaud is 'enabled', a port may autobaud to values different from the set values for speed, parity, and character size. As a result a network management system may temporarily observe values different from what was previously set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rs232AsyncPortParityErrs 1.3.6.1.3.20.3.1.6
Total number of characters with a parity error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rs232AsyncPortFramingErrs 1.3.6.1.3.20.3.1.7
Total number of characters with a framing error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rs232AsyncPortOverrunErrs 1.3.6.1.3.20.3.1.8
Total number of characters with an overrun error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rs232SyncPortTable 1.3.6.1.3.20.4
A list of synchronous port entries. The maximum entry number is given by the value of rs232Number. Entries need not exist for asynchronous ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232SyncPortEntry

rs232SyncPortEntry 1.3.6.1.3.20.4.1
Status and parameter values for a synchronous port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rs232SyncPortEntry  

rs232SyncPortIndex 1.3.6.1.3.20.4.1.1
A unique value for each port. Its value is the same as rs232PortIndex for the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rs232SyncPortClockSource 1.3.6.1.3.20.4.1.2
Source of the port's bit rate clock. 'split' means the tranmit clock is internal and the receive clock is external.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external(2), split(3)  

rs232SyncPortFrameCheckErrs 1.3.6.1.3.20.4.1.3
Total number of frames with an invalid frame check sequence, input from the port since system re-initialization and while the port state was 'up' or 'test'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rs232SyncPortTransmitUnderrunErrs 1.3.6.1.3.20.4.1.4
Total number of frames that failed to be transmitted on the port since system re-initialization and while the port state was 'up' or 'test' because data was not available to the transmitter in time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rs232SyncPortReceiveOverrunErrs 1.3.6.1.3.20.4.1.5
Total number of frames that failed to be received on the port since system re-initialization and while the port state was 'up' or 'test' because the receiver did not accept the data in time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rs232SyncPortInterruptedFrames 1.3.6.1.3.20.4.1.6
Total number of frames that failed to be received or transmitted on the port due to loss of modem signals since system re-initialization and while the port state was 'up' or 'test'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rs232SyncPortAbortedFrames 1.3.6.1.3.20.4.1.7
Number of frames aborted on the port due to receiving an abort sequence since system re-initialization and while the port state was 'up' or 'test'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rs232InSigTable 1.3.6.1.3.20.5
A list of port input control signal entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232InSigEntry

rs232InSigEntry 1.3.6.1.3.20.5.1
Input control signal status for a hardware port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rs232InSigEntry  

rs232InSigPortIndex 1.3.6.1.3.20.5.1.1
The value of rs232PortIndex for the port to which this entry belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rs232InSigName 1.3.6.1.3.20.5.1.2
Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector sq Signal Quality Detector srs Data Signaling Rate Selector srts Secondary Request to Send scts Secondary Clear to Send sdcd Secondary Received Line Signal Detector
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rts(1), cts(2), dsr(3), dtr(4), ri(5), dcd(6), sq(7), srs(8), srts(9), scts(10), sdcd(11)  

rs232InSigState 1.3.6.1.3.20.5.1.3
The current signal state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3)  

rs232InSigChanges 1.3.6.1.3.20.5.1.4
The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rs232OutSigTable 1.3.6.1.3.20.6
A list of port output control signal entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232OutSigEntry

rs232OutSigEntry 1.3.6.1.3.20.6.1
Output control signal status for a hardware port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rs232OutSigEntry  

rs232OutSigPortIndex 1.3.6.1.3.20.6.1.1
The value of rs232PortIndex for the port to which this entry belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rs232OutSigName 1.3.6.1.3.20.6.1.2
Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector sq Signal Quality Detector srs Data Signaling Rate Selector srts Secondary Request to Send scts Secondary Clear to Send sdcd Secondary Received Line Signal Detector
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rts(1), cts(2), dsr(3), dtr(4), ri(5), dcd(6), sq(7), srs(8), srts(9), scts(10), sdcd(11)  

rs232OutSigState 1.3.6.1.3.20.6.1.3
The current signal state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3)  

rs232OutSigChanges 1.3.6.1.3.20.6.1.4
The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter