RIVERSTONE-STP-MIB

File: RIVERSTONE-STP-MIB.mib (7341 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
BRIDGE-MIB SNMP-FRAMEWORK-MIB RSTONE-SMI-MIB

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY Counter32
OBJECT-TYPE TimeTicks Integer32
MODULE-COMPLIANCE OBJECT-GROUP TruthValue
TEXTUAL-CONVENTION dot1dBasePortEntry SnmpAdminString
riverstoneMibs

Defined Types

RSStpProtocolVersion  
An identifier exists for each type of protocol supported. command variable. Each addtional enumeration should be a power of two.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), ieee802(2), fastSTP(4)  

RsStpBaseEntry  
SEQUENCE    
  rsStpBaseEnableProtocol TruthValue
  rsStpBaseBlockBpdu TruthValue
  rsStpBaseBpduSends Counter32
  rsStpBaseBpduReceives Counter32

Defined Values

rsStpMib 1.3.6.1.4.1.5567.2.12
This mib module defines addtional configuration and statistics for Spanning Tree Protocol Management as defined in RFC 1493 Copyright (C) Riverstone Networks, Inc 2000
MODULE-IDENTITY    

rsStpGlobals 1.3.6.1.4.1.5567.2.12.1
Objects of global scope over one or more instances of Spanning Tree in a given switch.
Status: current Access: read-only
OBJECT-IDENTITY    

rsStpPortsLevel 1.3.6.1.4.1.5567.2.12.2
Objects of port level scope providing information about the Spanning tree on that port.
Status: current Access: read-only
OBJECT-IDENTITY    

rsStpStatus 1.3.6.1.4.1.5567.2.12.1.1
The global state of spanning tree protocol on this system. Individual ports may be enabled or disabled as necessary or this master switch can be used to turn all ports on or off. This object will cause a loss of convergence when set.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rsStpProtocol 1.3.6.1.4.1.5567.2.12.1.2
Specify the type of Spanning tree to run for the default instance of Spanning Tree. Changing this object has the effect of causing an existing spanning tree to lose convergence.
Status: current Access: read-write
OBJECT-TYPE    
  RSStpProtocolVersion  

rsStpProtocolsSupported 1.3.6.1.4.1.5567.2.12.1.3
Represents range of STP protocols supported. For example the value 6 would mean the switch is capable of both fastSTP(4) + ieee802(2) protocols.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rsStpLastSetErrorReason 1.3.6.1.4.1.5567.2.12.1.4
Reports the agent error code and reason for last failure to set any writable object in this mib. Format of the error code is NNN - reason string where NNN is a numeric identifer.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rsStpLastChanged 1.3.6.1.4.1.5567.2.12.2.1
The last time any object in this table was changed by SNMP or other local management means.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

rsStpBaseTable 1.3.6.1.4.1.5567.2.12.2.2
This table provides per port control of spanning tree protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsStpBaseEntry

rsStpBaseEntry 1.3.6.1.4.1.5567.2.12.2.2.1
Additional configuration capabilities not found in standard mibs such as configuring STP to run on a given port. All ports shown in dot1dBasePortEntry are capable of bridging, and thus can run STP.
Status: current Access: not-accessible
OBJECT-TYPE    
  RsStpBaseEntry  

rsStpBaseEnableProtocol 1.3.6.1.4.1.5567.2.12.2.2.1.1
Set or get the state of spanning tree protocol (send/receive) on the port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rsStpBaseBlockBpdu 1.3.6.1.4.1.5567.2.12.2.2.1.2
Set or get the state of BPDU filtering on this port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rsStpBaseBpduSends 1.3.6.1.4.1.5567.2.12.2.2.1.3
The number of BPDUs sent out on this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rsStpBaseBpduReceives 1.3.6.1.4.1.5567.2.12.2.2.1.4
The number of BPDUs received on this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rsStpConformance 1.3.6.1.4.1.5567.2.12.10
OBJECT IDENTIFIER    

rsStpGroups 1.3.6.1.4.1.5567.2.12.10.1
OBJECT IDENTIFIER    

rsStpCompliances 1.3.6.1.4.1.5567.2.12.10.2
OBJECT IDENTIFIER    

rsStpBaseGroup 1.3.6.1.4.1.5567.2.12.10.1.1
A collection of objects providing configuration and monitoring capabilites of Spanning Tree Protocol on a given switch.
Status: current Access: read-only
OBJECT-GROUP    

rsStpMibCompliance 1.3.6.1.4.1.5567.2.12.10.2.1
The compliance statement for device support of Priority and Multicast Filtering extended bridging services.
Status: current Access: read-only
MODULE-COMPLIANCE