RFC1398-MIB

File: RFC1398-MIB.mib (22333 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

Counter Gauge transmission
OBJECT-TYPE

Defined Types

Dot3StatsEntry  
SEQUENCE    
  dot3StatsIndex INTEGER
  dot3StatsAlignmentErrors Counter
  dot3StatsFCSErrors Counter
  dot3StatsSingleCollisionFrames Counter
  dot3StatsMultipleCollisionFrames Counter
  dot3StatsSQETestErrors Counter
  dot3StatsDeferredTransmissions Counter
  dot3StatsLateCollisions Counter
  dot3StatsExcessiveCollisions Counter
  dot3StatsInternalMacTransmitErrors Counter
  dot3StatsCarrierSenseErrors Counter
  dot3StatsFrameTooLongs Counter
  dot3StatsInternalMacReceiveErrors Counter

Dot3CollEntry  
SEQUENCE    
  dot3CollIndex INTEGER
  dot3CollCount INTEGER
  dot3CollFrequencies Counter

Defined Values

dot3 1.3.6.1.2.1.10.7
OBJECT IDENTIFIER    

dot3StatsTable 1.3.6.1.2.1.10.7.2
Statistics for a collection of ethernet-like interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3StatsEntry

dot3StatsEntry 1.3.6.1.2.1.10.7.2.1
Statistics for a particular interface to an ethernet-like medium.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dot3StatsEntry  

dot3StatsIndex 1.3.6.1.2.1.10.7.2.1.1
An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dot3StatsAlignmentErrors 1.3.6.1.2.1.10.7.2.1.2
A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsFCSErrors 1.3.6.1.2.1.10.7.2.1.3
A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsSingleCollisionFrames 1.3.6.1.2.1.10.7.2.1.4
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsMultipleCollisionFrames 1.3.6.1.2.1.10.7.2.1.5
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsSQETestErrors 1.3.6.1.2.1.10.7.2.1.6
A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsDeferredTransmissions 1.3.6.1.2.1.10.7.2.1.7
A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsLateCollisions 1.3.6.1.2.1.10.7.2.1.8
The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsExcessiveCollisions 1.3.6.1.2.1.10.7.2.1.9
A count of frames for which transmission on a particular interface fails due to excessive collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsInternalMacTransmitErrors 1.3.6.1.2.1.10.7.2.1.10
A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object, the dot3StatsExcessiveCollisions object, or the dot3StatsCarrierSenseErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsCarrierSenseErrors 1.3.6.1.2.1.10.7.2.1.11
The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsFrameTooLongs 1.3.6.1.2.1.10.7.2.1.13
A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsInternalMacReceiveErrors 1.3.6.1.2.1.10.7.2.1.16
A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, or the dot3StatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3CollTable 1.3.6.1.2.1.10.7.5
A collection of collision histograms for a particular set of interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3CollEntry

dot3CollEntry 1.3.6.1.2.1.10.7.5.1
A cell in the histogram of per-frame collisions for a particular interface. An instance of this object represents the frequency of individual MAC frames for which the transmission (successful or otherwise) on a particular interface is accompanied by a particular number of media collisions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dot3CollEntry  

dot3CollIndex 1.3.6.1.2.1.10.7.5.1.1
The index value that uniquely identifies the interface to which a particular collision histogram cell pertains. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dot3CollCount 1.3.6.1.2.1.10.7.5.1.2
The number of per-frame media collisions for which a particular collision histogram cell represents the frequency on a particular interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

dot3CollFrequencies 1.3.6.1.2.1.10.7.5.1.3
A count of individual MAC frames for which the transmission (successful or otherwise) on a particular interface is accompanied by a particular number of media collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3Errors 1.3.6.1.2.1.10.7.7
OBJECT IDENTIFIER    

dot3ErrorInitError 1.3.6.1.2.1.10.7.7.1
OBJECT IDENTIFIER    

dot3ErrorLoopbackError 1.3.6.1.2.1.10.7.7.2
OBJECT IDENTIFIER    

dot3Tests 1.3.6.1.2.1.10.7.6
OBJECT IDENTIFIER    

dot3TestTdr 1.3.6.1.2.1.10.7.6.1
OBJECT IDENTIFIER    

dot3ChipSets 1.3.6.1.2.1.10.7.8
OBJECT IDENTIFIER    

dot3ChipSetAMD 1.3.6.1.2.1.10.7.8.1
OBJECT IDENTIFIER    

dot3ChipSetAMD7990 1.3.6.1.2.1.10.7.8.1.1
OBJECT IDENTIFIER    

dot3ChipSetAMD79900 1.3.6.1.2.1.10.7.8.1.2
OBJECT IDENTIFIER    

dot3ChipSetIntel 1.3.6.1.2.1.10.7.8.2
OBJECT IDENTIFIER    

dot3ChipSetIntel82586 1.3.6.1.2.1.10.7.8.2.1
OBJECT IDENTIFIER    

dot3ChipSetIntel82596 1.3.6.1.2.1.10.7.8.2.2
OBJECT IDENTIFIER    

dot3ChipSetSeeq 1.3.6.1.2.1.10.7.8.3
OBJECT IDENTIFIER    

dot3ChipSetSeeq8003 1.3.6.1.2.1.10.7.8.3.1
OBJECT IDENTIFIER    

dot3ChipSetNational 1.3.6.1.2.1.10.7.8.4
OBJECT IDENTIFIER    

dot3ChipSetNational8390 1.3.6.1.2.1.10.7.8.4.1
OBJECT IDENTIFIER    

dot3ChipSetNationalSonic 1.3.6.1.2.1.10.7.8.4.2
OBJECT IDENTIFIER    

dot3ChipSetFujitsu 1.3.6.1.2.1.10.7.8.5
OBJECT IDENTIFIER    

dot3ChipSetFujitsu86950 1.3.6.1.2.1.10.7.8.5.1
OBJECT IDENTIFIER    

dot3ChipSetFujitsu86960 1.3.6.1.2.1.10.7.8.5.2
OBJECT IDENTIFIER