REPEATER-REV4-MIB

File: REPEATER-REV4-MIB.mib (135777 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB CTRON-MIB-NAMES
RFC-1212

Imported symbols

NetworkAddress Counter DisplayString
repeaterRev4 OBJECT-TYPE

Defined Types

RptrRedundCrctEntry  
SEQUENCE    
  rptrRedundCrctId INTEGER
  rptrRedundCrctName OCTET STRING
  rptrRedundCrctRetrys INTEGER
  rptrRedundCrctNumBPs INTEGER
  rptrRedundCrctNumAddr INTEGER
  rptrRedundCrctAddAddr NetworkAddress
  rptrRedundCrctDelAddr NetworkAddress
  rptrRedundCrctEnable INTEGER
  rptrRedundCrctReset INTEGER

RptrRedundPortEntry  
SEQUENCE    
  rptrRedundPortId INTEGER
  rptrRedundPortCrctId INTEGER
  rptrRedundPortNum INTEGER
  rptrRedundPortBoardNum INTEGER
  rptrRedundPortType INTEGER

RptrRedundAddrEntry  
SEQUENCE    
  rptrRedundAddrId INTEGER
  rptrRedundAddrCrctId INTEGER
  rptrRedundAddrIPAddr NetworkAddress

RptrSrcAddrListEntry  
SEQUENCE    
  rptrSrcAddrListId INTEGER
  rptrSrcAddrAddressList OCTET STRING

RptrSrcAddrSrcTableEntry  
SEQUENCE    
  rptrSrcAddrSrcTableEntryId OCTET STRING
  rptrSrcAddrSrcTableEntryPort INTEGER
  rptrSrcAddrSrcTableEntryPortGroup INTEGER

RptrPortGrpMgmtEntry  
SEQUENCE    
  rptrPortGrpMgmtGrpId INTEGER
  rptrPortGrpMgmtName DisplayString
  rptrPortGrpMgmtPortCount INTEGER
  rptrPortGrpMgmtPortsEnable INTEGER
  rptrPortGrpMgmtPortsOn INTEGER
  rptrPortGrpMgmtPortsOper INTEGER
  rptrPortGrpMgmtLogPortCount INTEGER

RptrPortGrpPktStatsEntry  
SEQUENCE    
  rptrPortGrpPktStatsId INTEGER
  rptrPortGrpPktStatsPkts Counter
  rptrPortGrpPktStatsBytes Counter
  rptrPortGrpPktStatsColls Counter
  rptrPortGrpPktStatsErrors Counter
  rptrPortGrpPktStatsAlign Counter
  rptrPortGrpPktStatsCRC Counter
  rptrPortGrpPktStatsOOW Counter
  rptrPortGrpPktStatsBroadcasts Counter
  rptrPortGrpPktStatsMulticasts Counter

RptrPortGrpProtocolEntry  
SEQUENCE    
  rptrPortGrpProtocolId INTEGER
  rptrPortGrpProtocolOSI Counter
  rptrPortGrpProtocolNovell Counter
  rptrPortGrpProtocolBanyan Counter
  rptrPortGrpProtocolDECNet Counter
  rptrPortGrpProtocolXNS Counter
  rptrPortGrpProtocolIP Counter
  rptrPortGrpProtocolCtron Counter
  rptrPortGrpProtocolAppletalk Counter
  rptrPortGrpProtocolOther Counter

RptrPortGrpFrameSzEntry  
SEQUENCE    
  rptrPortGrpFrameSzId INTEGER
  rptrPortGrpFrameSzRunt Counter
  rptrPortGrpFrameSz64To127 Counter
  rptrPortGrpFrameSz128To255 Counter
  rptrPortGrpFrameSz256To511 Counter
  rptrPortGrpFrameSz512To1023 Counter
  rptrPortGrpFrameSz1024To1518 Counter
  rptrPortGrpFrameSzGiant Counter

RptrPortGrpAlarmEntry  
SEQUENCE    
  rptrPortGrpAlarmId INTEGER
  rptrPortGrpAlarmTrafEnable INTEGER
  rptrPortGrpAlarmTrafThreshold INTEGER
  rptrPortGrpAlarmTrafGrpDisable INTEGER
  rptrPortGrpAlarmCollEnable INTEGER
  rptrPortGrpAlarmCollThreshold INTEGER
  rptrPortGrpAlarmCollBdDisable INTEGER
  rptrPortGrpAlarmErrEnable INTEGER
  rptrPortGrpAlarmErrThreshold INTEGER
  rptrPortGrpAlarmErrSource INTEGER
  rptrPortGrpAlarmErrGrpDisable INTEGER
  rptrPortGrpAlarmBroadEnable INTEGER
  rptrPortGrpAlarmBroadThreshold INTEGER
  rptrPortGrpAlarmBroadGrpDisable INTEGER

RptrPortGrpSrcAddrEntry  
SEQUENCE    
  rptrPortGrpSrcAddrId INTEGER
  rptrPortGrpSrcAddrActiveUsers INTEGER

RptrPortGrpHwTrapEntry  
SEQUENCE    
  rptrPortGrpHwTrapSetGrpId INTEGER
  rptrPortGrpHwTrapSetLink INTEGER
  rptrPortGrpHwTrapSetSeg INTEGER

RptrPortGrpSaTrapEntry  
SEQUENCE    
  rptrPortGrpSaTrapSetGrpId INTEGER
  rptrPortGrpSaTrapSetSrcaddr INTEGER

RptrPortGrpSrcAddrLockEntry  
SEQUENCE    
  rptrPortGrpSrcAddrLockGrpId INTEGER
  rptrPortGrpSrcAddrLock INTEGER
  rptrPortGrpSASecuritySecureState INTEGER
  rptrPortGrpSASecurityLearnState INTEGER
  rptrPortGrpSASecurityLearnMode INTEGER

RptrPortMgmtEntry  
SEQUENCE    
  rptrPortMgmtPortId INTEGER
  rptrPortMgmtPortGrpId INTEGER
  rptrPortMgmtName DisplayString
  rptrPortMgmtAdminState INTEGER
  rptrPortMgmtOperState INTEGER
  rptrPortMgmtPortType OBJECT IDENTIFIER

RptrPortPktStatsEntry  
SEQUENCE    
  rptrPortPktStatsPortId INTEGER
  rptrPortPktStatsPortGrpId INTEGER
  rptrPortPktStatsPackets Counter
  rptrPortPktStatsBytes Counter
  rptrPortPktStatsColls Counter
  rptrPortPktStatsErrors Counter
  rptrPortPktStatsAlign Counter
  rptrPortPktStatsCRC Counter
  rptrPortPktStatsOOW Counter
  rptrPortPktStatsBroadcasts Counter
  rptrPortPktStatsMulticasts Counter

RptrPortProtocolEntry  
SEQUENCE    
  rptrPortProtocolPortId INTEGER
  rptrPortProtocolPortGrpId INTEGER
  rptrPortProtocolOSI Counter
  rptrPortProtocolNovell Counter
  rptrPortProtocolBanyan Counter
  rptrPortProtocolDECNet Counter
  rptrPortProtocolXNS Counter
  rptrPortProtocolIP Counter
  rptrPortProtocolCtron Counter
  rptrPortProtocolAppletalk Counter
  rptrPortProtocolOther Counter

RptrPortFrameSzEntry  
SEQUENCE    
  rptrPortFrameSzPortId INTEGER
  rptrPortFrameSzPortGrpId INTEGER
  rptrPortFrameSzRunt Counter
  rptrPortFrameSz64To127 Counter
  rptrPortFrameSz128To255 Counter
  rptrPortFrameSz256To511 Counter
  rptrPortFrameSz512To1023 Counter
  rptrPortFrameSz1024To1518 Counter
  rptrPortFrameSzGiant Counter

RptrPortAlarmEntry  
SEQUENCE    
  rptrPortAlarmPortId INTEGER
  rptrPortAlarmPortGrpId INTEGER
  rptrPortAlarmTrafEnable INTEGER
  rptrPortAlarmTrafThreshold INTEGER
  rptrPortAlarmTrafPortDisable INTEGER
  rptrPortAlarmCollEnable INTEGER
  rptrPortAlarmCollThreshold INTEGER
  rptrPortAlarmCollPortDisable INTEGER
  rptrPortAlarmErrEnable INTEGER
  rptrPortAlarmErrThreshold INTEGER
  rptrPortAlarmErrSource INTEGER
  rptrPortAlarmErrPortDisable INTEGER
  rptrPortAlarmBroadEnable INTEGER
  rptrPortAlarmBroadThreshold INTEGER
  rptrPortAlarmBroadPortDisable INTEGER

RptrPortRedundEntry  
SEQUENCE    
  rptrPortRedundPortId INTEGER
  rptrPortRedundPortGrpId INTEGER
  rptrPortRedundCrctNum INTEGER
  rptrPortRedundType INTEGER
  rptrPortRedundStatus INTEGER

RptrPortSrcAddrEntry  
SEQUENCE    
  rptrPortSrcAddrPortId INTEGER
  rptrPortSrcAddrPortGrpId INTEGER
  rptrPortSrcAddrTopoState INTEGER
  rptrPortSrcAddrForceTrunk INTEGER
  rptrPortSrcAddrActiveUsers INTEGER

RptrPortSrcAddrListEntry  
SEQUENCE    
  rptrPortSrcAddrListId INTEGER
  rptrPortSrcAddrListPortId INTEGER
  rptrPortSrcAddrListPortGrpId INTEGER
  rptrPortSrcAddrAddressList OCTET STRING

RptrPortHardwareEntry  
SEQUENCE    
  rptrPortHardwarePortId INTEGER
  rptrPortHardwarePortGrpId INTEGER
  rptrPortHardwareSegStatus INTEGER
  rptrPortHardwareLinkStatus INTEGER

RptrPortHwTrapEntry  
SEQUENCE    
  rptrPortHwTrapSetPortId INTEGER
  rptrPortHwTrapSetPortGrpId INTEGER
  rptrPortHwTrapSetLink INTEGER
  rptrPortHwTrapSetSeg INTEGER

RptrPortSaTrapEntry  
SEQUENCE    
  rptrPortSaTrapSetPortId INTEGER
  rptrPortSaTrapSetPortGrpId INTEGER
  rptrPortSaTrapSetSrcaddr INTEGER

RptrPortSecurityEntry  
SEQUENCE    
  rptrPortSecurityPortGrpId INTEGER
  rptrPortSecurityPortId INTEGER
  rptrPortSecurityLockStatus INTEGER
  rptrPortSecurityLockAddAddress OCTET STRING
  rptrPortSecurityLockDelAddress OCTET STRING
  rptrPortSecurityDisableOnViolation INTEGER
  rptrPortSecurityFullSecEnabled INTEGER
  rptrPortSecuritySecureState INTEGER
  rptrPortSecurityForceNonSecure INTEGER
  rptrPortSecurityLearnState INTEGER
  rptrPortSecurityLearnMode INTEGER

RptrPortSecurityListEntry  
SEQUENCE    
  rptrPortSecurityListPortGrpId INTEGER
  rptrPortSecurityListPortId INTEGER
  rptrPortSecurityListIndex INTEGER
  rptrPortSecurityListAddress OCTET STRING

RptrPortAssocEntry  
SEQUENCE    
  rptrPortAssocBoard INTEGER
  rptrPortAssocStatus INTEGER

Defined Values

repeaterrev4 1.3.6.1.4.1.52.4.1.1.1.4
OBJECT IDENTIFIER    

rptr 1.3.6.1.4.1.52.4.1.1.1.4.1
OBJECT IDENTIFIER    

rptrMgmt 1.3.6.1.4.1.52.4.1.1.1.4.1.1
OBJECT IDENTIFIER    

rptrMgmtName 1.3.6.1.4.1.52.4.1.1.1.4.1.1.1
The ASCII name assigned to this network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(20)  

rptrMgmtPortCount 1.3.6.1.4.1.52.4.1.1.1.4.1.1.2
Total number of ports residing on this lan segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrMgmtPortsEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.1.3
Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noEnable(1), enable(2)  

rptrMgmtPortsOn 1.3.6.1.4.1.52.4.1.1.1.4.1.1.4
Get the total number of ON ports in this network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrMgmtPortsOper 1.3.6.1.4.1.52.4.1.1.1.4.1.1.5
Get the number of operational ports in this network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrMgmtBoardMap 1.3.6.1.4.1.52.4.1.1.1.4.1.1.6
Get a map of the chassis slots occupied by the boards in this network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrMgmtInterfaceNum 1.3.6.1.4.1.52.4.1.1.1.4.1.1.7
Get the MIBII interface number of this network. A return of zero will mean this network is not associated with a MIBII interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrMgmtResetCounters 1.3.6.1.4.1.52.4.1.1.1.4.1.1.8
Setting this OID to 2 will reset the 'rptrPktStats', 'rptrProtocols' and 'rptrFrameSizes' RREV-4 branch static counters. Reading this OID will always return a 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), reseStaticCounters(2)  

rptrStats 1.3.6.1.4.1.52.4.1.1.1.4.1.2
OBJECT IDENTIFIER    

rptrPktStats 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1
OBJECT IDENTIFIER    

rptrPktStatsPackets 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.1
Get this repeater's total received packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPktStatsBytes 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.2
Get this repeater's total received bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPktStatsColls 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.3
Get this repeater's total collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPktStatsErrors 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.4
Get this repeater's total errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPktStatsAlign 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.5
Get this repeater's total frame alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPktStatsCRC 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.6
Get this repeater's total CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPktStatsOOW 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.7
Get this repeater's total out-of-window collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPktStatsNoRsc 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.8
This counter is the number of packets on this network that the hardware has processed that the management has either not seen yet, in the case of an active network, or has missed missed all together, in the case of a once active network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPktStatsBroadcasts 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.9
This counter is the number of broadcast packets on this network that the hardware has processed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPktStatsMulticasts 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.10
This counter is the number of multicast packets on this network that the hardware has processed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrProtocols 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2
OBJECT IDENTIFIER    

rptrProtocolsOSI 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.1
Get this repeater's total received OSI packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrProtocolsNovell 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.2
Get this repeater's total received Novell packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrProtocolsBanyan 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.3
Get this repeater's total received Banyan packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrProtocolsDECNet 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.4
Get this repeater's total received DECNet packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrProtocolsXNS 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.5
Get this repeater's total received XNS packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrProtocolsIP 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.6
Get this repeater's total received TCP/IP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrProtocolsCtron 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.7
Get this repeater's total received CTRON Management packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrProtocolsAppletalk 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.8
Get this repeater's total received Appletalk packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrProtocolsOther 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.9
Get this repeater's total received unknown protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrFrameSizes 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3
OBJECT IDENTIFIER    

rptrFrameSzRunt 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.1
Get this repeater's total received packets of size less than 64 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrFrameSz64To127 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.2
Get this repeater's total received packets of size between 64 and 127 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrFrameSz128To255 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.3
Get this repeater's total received packets of size between 128 and 255 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrFrameSz256To511 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.4
Get this repeater's total received packets of size between 256 and 511 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrFrameSz512To1023 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.5
Get this repeater's total received packets of size between 512 and 1023 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrFrameSz1024To1518 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.6
Get this repeater's total received packets of size between 1024 and 1518 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrFrameSzGiant 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.7
Get this repeater's total received packets of size greater than 1518 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrAlarms 1.3.6.1.4.1.52.4.1.1.1.4.1.3
OBJECT IDENTIFIER    

rptrAlarmsTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.3.1
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrAlarmsTrafThreshold 1.3.6.1.4.1.52.4.1.1.1.4.1.3.2
The maximum number of packets that will be allowed before an alarm is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrAlarmsCollEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.3.3
Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrAlarmsCollThreshold 1.3.6.1.4.1.52.4.1.1.1.4.1.3.4
The collision threshold is the maximum number of collisions within the time base that will be allowed before an alarm is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

rptrAlarmsErrEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.3.5
Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrAlarmsErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6
The percentage of errors per good packet within the timebase that will cause an alarm. The units of this value is in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rptrAlarmsErrSource 1.3.6.1.4.1.52.4.1.1.1.4.1.3.7
Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrAlarmsAlarmTimebase 1.3.6.1.4.1.52.4.1.1.1.4.1.3.8
The alarm timebase, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..999999  

rptrAlarmsBroadEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.3.9
Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrAlarmsBroadThreshold 1.3.6.1.4.1.52.4.1.1.1.4.1.3.10
The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrRedundancy 1.3.6.1.4.1.52.4.1.1.1.4.1.4
OBJECT IDENTIFIER    

rptrRedund 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1
OBJECT IDENTIFIER    

rptrRedundReset 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.1
If this object is set to Reset it will cause a reset of the redundancy object to occur. Setting this object to NoReset will do nothing. This object will always be read as NoReset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noReset(1), reset(2)  

rptrRedundPollInterval 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.2
Get/Set the number of seconds between polls for redundancy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrRedundTestTOD 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.3
Get/Set the time of day at which the redundant circuits will be tested. The format of the time string is hh:mm:ss.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(8)  

rptrRedundPerformTest 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.4
If this object is set to Test it will cause a test of the redundant circuits to be performed. Setting this object to NoTest will have no effect. When read this object will always return NoTest.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noTest(1), test(2)  

rptrRedundMaxCrcts 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.5
Returns the maximum number of circuits which may exist on this network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundCrctTable 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2
A list of redundant circuit objects for this repeater.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrRedundCrctEntry

rptrRedundCrctEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1
A list of objects for a particular redundant circuit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrRedundCrctEntry  

rptrRedundCrctId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.1
Returns the index for a member circuit in the table of redundant circuits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundCrctName 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.2
Get/Set the name of the indicated circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

rptrRedundCrctRetrys 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.3
Get/Set the the number of unanswered polls allowed for the circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrRedundCrctNumBPs 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.4
Get the number of board/port combinations associated with the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundCrctNumAddr 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.5
Get the number of IP Addresses associated with the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundCrctAddAddr 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.6
Add an IP Address to the polling list for the indicated circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NetworkAddress  

rptrRedundCrctDelAddr 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.7
Delete an IP Address from the polling list of the indicated circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NetworkAddress  

rptrRedundCrctEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.8
If this object is set to Enable, the circuit is enabled. If this object is set to Disable, the circuit is disbabled. When read, this object returns the state of the object based on the last request made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrRedundCrctReset 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9
If this object is set to Reset, the circuit is reset. All of the circuit's associated boards and ports are returned to NOT_USED, any associated IP Addresses are purged from the circuit's address list, the name is cleared, and the retry count is reset to a default value. Setting this object to NoReset has no effect. When read, NoReset is always returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noReset(1), reset(2)  

rptrRedundPortTable 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3
A list of redundant port objects for this repeater.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrRedundPortEntry

rptrRedundPortEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1
A redundant port entry containing objects pertaining to a particular redundant port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrRedundPortEntry  

rptrRedundPortId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.1
A unique value identifying an element in a sequence of member ports which belong to a circuit in the table of redundant circuits. This value is not a port number; rather it is a value which goes from 1 to the maximum number of ports which may be included in a redundant circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundPortCrctId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.2
A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundPortNum 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.3
Returns the port number of a member port belonging to a redundant circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundPortBoardNum 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.4
Returns the board number of a member port belonging to a redundant circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundPortType 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.5
Return the state of a port associated with the indicated circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notUsed(1), primary(2), backup(3)  

rptrRedundAddrTable 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4
A list of redundant IP Address objects which belong to a circuit for this repeater.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrRedundAddrEntry

rptrRedundAddrEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1
A entry containing objects pertaining to a particular redundant IP Address which belongs to a circuit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrRedundAddrEntry  

rptrRedundAddrId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.1
A unique value identifying an element in a sequence of member IP Addresses which belong to a circuit in the table of redundant circuits. This value goes from 1 to the maximum number of IP Addresses which may be included in a redundant circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundAddrCrctId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.2
A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrRedundAddrIPAddr 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.3
Returns an IP Address associated with the indicated circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NetworkAddress  

rptrSourceAddress 1.3.6.1.4.1.52.4.1.1.1.4.1.5
OBJECT IDENTIFIER    

rptrSrcAddrListTable 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1
This table defines the source address list that is defined at the repeater level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrSrcAddrListEntry

rptrSrcAddrListEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1
Defines a specific source address object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrSrcAddrListEntry  

rptrSrcAddrListId 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.1
Returns an index into a table of source address seen by this repeater.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrSrcAddrAddressList 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.2
Returns a source address seen by this repeater.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

rptrSrcAddrSrcTable 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2
This table defines the list of all source addresses that have been seen.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrSrcAddrSrcTableEntry

rptrSrcAddrSrcTableEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1
Describes a particular source address source entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrSrcAddrSrcTableEntry  

rptrSrcAddrSrcTableEntryId 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.1
Returns the source address to which this table's information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

rptrSrcAddrSrcTableEntryPort 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.2
Returns the port# of the port that sourced the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrSrcAddrSrcTableEntryPortGroup 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.3
Returns the port group# of the port that sourced the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrSrcAddrMgmt 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3
OBJECT IDENTIFIER    

rptrSrcAddrMgmtSrcAgeInterval 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.1
Get/Set source addressing ageing interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrSrcAddrMgmtPortLock 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.2
Setting this object to Lock will activate the network port security lock. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unlock(1), lock(2), portMisMatch(3)  

rptrSrcAddrMgmtActiveUsers 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.3
Get the number of active users on this network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrSrcAddrMgmtHashType 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.4
Defines the type of hashing that will be used for source address management. In a DEC-NET environment or a combination fo DEC-NET and non DEC-NET users where source address hash access is a concern a value of decHash(2) may yield better results. For non DEC-NET users a value of noDecHash(1) is preferred.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noDecHash(1), decHash(2)  

rptrTrap 1.3.6.1.4.1.52.4.1.1.1.4.1.6
OBJECT IDENTIFIER    

rptrHwTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1
OBJECT IDENTIFIER    

rptrSaTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.1.6.2
OBJECT IDENTIFIER    


rptrHwTrapSetSeg 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2
Enables and disables segmentation traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetSeg for this network are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetSeg for this network are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetSeg for this network are not currently set to a value the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2), other(3)  

rptrSaTrapSetSrcaddr 1.3.6.1.4.1.52.4.1.1.1.4.1.6.2.1
Enables and disables source address traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortSaTrapSetSrcaddr to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortSaTrapSetSrcaddr for this network are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortSaTrapSetSrcaddr for this network are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortSaTrapSetSrcaddr for this network are not currently set to a value the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2), other(3)  

rptrSaSecurity 1.3.6.1.4.1.52.4.1.1.1.4.1.7
OBJECT IDENTIFIER    

rptrSecurityLockState 1.3.6.1.4.1.52.4.1.1.1.4.1.7.1
Setting this object to Lock will activate the network port security lock. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unlock(1), lock(2), portMisMatch(3)  

rptrSecuritySecureState 1.3.6.1.4.1.52.4.1.1.1.4.1.7.2
The status of source address security of the network. Ports on the network that are secure(1), can be locked in order to enable security. nonSecure(2) ports cannot be locked. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER secure(1), nonSecure(2), portMisMatch(3)  

rptrSecurityLearnState 1.3.6.1.4.1.52.4.1.1.1.4.1.7.3
The learn state of the network. This object will only be applied to ports that are unlocked. If set to learn(1), all addresses are deleted on the ports and learning begins once again. If it is set to noLearn(2), learning stops on the port. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER learn(1), noLearn(2), portMisMatch(3)  

rptrSecurityLearnMode 1.3.6.1.4.1.52.4.1.1.1.4.1.7.4
Get/Set the learn mode of the network. If set to onetime learn mode oneTime(1), each port is capable of learning two addresses and securing on both destination and source addresses once they are locked. If set to continuous learn continuous(2), all addresses are initially deleted and each port continuously replaces the existing secure source address with the latest source address it sees. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oneTime(1), continuous(2), portMisMatch(3)  

rptrPortGroup 1.3.6.1.4.1.52.4.1.1.1.4.2
OBJECT IDENTIFIER    

rptrPortGrpMgmtTable 1.3.6.1.4.1.52.4.1.1.1.4.2.1
A list of port management objects for this repeater node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortGrpMgmtEntry

rptrPortGrpMgmtEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1
An entry containing objects pertaining to port management for a port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortGrpMgmtEntry  

rptrPortGrpMgmtGrpId 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.1
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpMgmtName 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.2
Gets/Sets a name for the specified port group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(20)  

rptrPortGrpMgmtPortCount 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.3
Get total number of ports contained on the board. Notice that this is the physical port count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpMgmtPortsEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.4
Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noEnable(1), enable(2)  

rptrPortGrpMgmtPortsOn 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.5
Get total number of ON ports in this port group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpMgmtPortsOper 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.6
Get total number of operational ports in the port group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpMgmtLogPortCount 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.7
Get total number of ports contained in this port group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpStats 1.3.6.1.4.1.52.4.1.1.1.4.2.2
OBJECT IDENTIFIER    

rptrPortGrpPktStatsTbl 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1
This table provides packet statistics for port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortGrpPktStatsEntry

rptrPortGrpPktStatsEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1
Defines a specific packet statistics entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortGrpPktStatsEntry  

rptrPortGrpPktStatsId 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.1
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpPktStatsPkts 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.2
Return this port group's total received packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpPktStatsBytes 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.3
Return this port group's total received bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpPktStatsColls 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.4
Return this port group's total collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpPktStatsErrors 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.5
Return this port group's total errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpPktStatsAlign 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.6
Return this port group's total frame alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpPktStatsCRC 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.7
Return this port group's total CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpPktStatsOOW 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.8
Return this port group's total out-of-window collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpPktStatsBroadcasts 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.9
Return this port group's total received broadcast packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpPktStatsMulticasts 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.10
Return this port group's total received multicast packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpProtocolTbl 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2
Provides port group protocol statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortGrpProtocolEntry

rptrPortGrpProtocolEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1
Defines a specific port group protocol statistics entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortGrpProtocolEntry  

rptrPortGrpProtocolId 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.1
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpProtocolOSI 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.2
Return this port group's total received OSI packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpProtocolNovell 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.3
Return this port group's total received Novell packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpProtocolBanyan 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.4
Return this port group's total received Banyan packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpProtocolDECNet 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.5
Return this port group's total received DECNet packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpProtocolXNS 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.6
Return this port group's total received XNS packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpProtocolIP 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.7
Return this port group's total received TCP/IP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpProtocolCtron 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.8
Return this port group's total received CTRON Management packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpProtocolAppletalk 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.9
Return this port group's total received Appletalk packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpProtocolOther 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.10
Return this port group's total received unknown protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpFrameSzTbl 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3
Defines frame sizes as seen by this port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortGrpFrameSzEntry

rptrPortGrpFrameSzEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1
Defines a particular frame size entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortGrpFrameSzEntry  

rptrPortGrpFrameSzId 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.1
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpFrameSzRunt 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.2
Return this port group's total received packets of size less than 64 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpFrameSz64To127 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.3
Return this port group's total received packets of size between 64 and 127 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpFrameSz128To255 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.4
Return this port group's total received packets of size between 128 and 255 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpFrameSz256To511 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.5
Return this port group's total received packets of size between 256 and 511 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpFrameSz512To1023 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.6
Return this port group's total received packets of size between 512 and 1023 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpFrameSz1024To1518 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.7
Return this port group's total received packets of size between 1024 and 1518 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpFrameSzGiant 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.8
Return this port group's total received packets of size greater than 1518 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortGrpAlarmTable 1.3.6.1.4.1.52.4.1.1.1.4.2.3
A list of port group alarm objects for this repeater node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortGrpAlarmEntry

rptrPortGrpAlarmEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1
An entry containing objects pertaining to port group alarms for a port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortGrpAlarmEntry  

rptrPortGrpAlarmId 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.1
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpAlarmTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.2
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortGrpAlarmTrafThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3
The maximum number of packets that will be allowed before an alarm is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrPortGrpAlarmTrafGrpDisable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.4
Set will permit a port group to be disabled on a traffic alarm condition. Get will show whether the port group disabling is allowed or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortGrpAlarmCollEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.5
Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortGrpAlarmCollThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.6
The collision threshold is the maximum number of collisions within the time base that will be allowed before an alaram is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999999  

rptrPortGrpAlarmCollBdDisable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.7
Set will permit a port group to be disabled on a collision alarm condition. Get will show whether the port group disabling is allowed or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortGrpAlarmErrEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.8
Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortGrpAlarmErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.9
Get/Set the percentage of errors per good packet within the timebase that will cause an alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rptrPortGrpAlarmErrSource 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.10
Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrPortGrpAlarmErrGrpDisable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.11
Set will permit a port group to be disabled on an error alarm condition. Get will show whether the port group disabling is allowed or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortGrpAlarmBroadEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.12
Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortGrpAlarmBroadThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.13
The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrPortGrpAlarmBroadGrpDisable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.14
Set will permit a port group to be disabled on a broadcast alarm condition. Get will show whether the port group disabling is allowed or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortGrpSrcAddrTable 1.3.6.1.4.1.52.4.1.1.1.4.2.4
This table provides a list of the number of active users that have been seen by port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortGrpSrcAddrEntry

rptrPortGrpSrcAddrEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1
Defines a specific active user entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortGrpSrcAddrEntry  

rptrPortGrpSrcAddrId 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.1
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpSrcAddrActiveUsers 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.2
Returns the total number of active users seen by this port group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpTrap 1.3.6.1.4.1.52.4.1.1.1.4.2.5
OBJECT IDENTIFIER    

rptrPortGrpHwTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1
OBJECT IDENTIFIER    

rptrPortGrpSaTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2
OBJECT IDENTIFIER    

rptrPortGrpHwTrapTable 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1
A list of trap enable/disable at the port group level. Disable here is equivalent to disable for each port in the port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortGrpHwTrapEntry

rptrPortGrpHwTrapEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1
Individual trap entries for port group enable/disable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortGrpHwTrapEntry  

rptrPortGrpHwTrapSetGrpId 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.1
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


rptrPortGrpHwTrapSetSeg 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.3
Enables and disables segmentation traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetSeg for this port group are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetSeg for this port group are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetSeg for this port group are not currently set to a value the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2), other(3)  

rptrPortGrpSaTrapTable 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1
A list of trap enable/disable at the port group level. Disable here is equivalent to disable for each port in the port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortGrpSaTrapEntry

rptrPortGrpSaTrapEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1
Individual trap entries for port group enable/disable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortGrpSaTrapEntry  

rptrPortGrpSaTrapSetGrpId 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.1
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpSaTrapSetSrcaddr 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.2
Enables and disables source address traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rtprPortSaTrapSetSrcaddr to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rtprPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortSaTrapSetSrcaddr for this port group are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortSaTrapSetSrcaddr for this port group are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortSaTrapSetSrcaddr for this port group are not currently set to a value the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2), other(3)  

rptrPortGrpSrcAddrLockTable 1.3.6.1.4.1.52.4.1.1.1.4.2.6
This table defines the status of the port group source address security locks.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortGrpSrcAddrLockEntry

rptrPortGrpSrcAddrLockEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1
DeDefines a status of a particular port group security lock.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortGrpSrcAddrLockEntry  

rptrPortGrpSrcAddrLockGrpId 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.1
Defines a particular port group for which this source address security lock information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortGrpSrcAddrLock 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.2
Allows setting of the security lock status for this port group. unlock(1) - Unlocks the source address lock this group, lock(2) - Locks the source address for this group, Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unlock(1), lock(2), portMisMatch(3)  

rptrPortGrpSASecuritySecureState 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.3
The state of the source addressing security for this port group. Ports on the port group that are secure(1), can be locked in order to enable security. When a value of nonSecure(2) is returned ports cannot be locked. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER secure(1), nonSecure(2), portMisMatch(3)  

rptrPortGrpSASecurityLearnState 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4
The learn state of source addressing security for this port group. This object will only be applied to ports that are unlocked. If set to learn(1), all addresses are deleted on the port and learning begins once again. If it is set to noLearn(2), learning stops on the port. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER learn(1), noLearn(2), portMisMatch(3)  

rptrPortGrpSASecurityLearnMode 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.5
The learn mode of source addressing security port group. If set to oneTime(1), each port is capable of learning two addresses and securing on both destination and source addresses once they are locked. If set to continuous(2), all addresses are initially deleted and each port continuously replaces the existing secure source address with latest source address it sees. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oneTime(1), continuous(2), portMisMatch(3)  

rptrPort 1.3.6.1.4.1.52.4.1.1.1.4.3
OBJECT IDENTIFIER    

rptrPortMgmtTable 1.3.6.1.4.1.52.4.1.1.1.4.3.1
A list of port management objects for this repeater node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortMgmtEntry

rptrPortMgmtEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1
An entry containing objects pertaining to port management for a port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortMgmtEntry  

rptrPortMgmtPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortMgmtPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortMgmtName 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.3
Sets/Gets an ASCII name assigned to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(20)  

rptrPortMgmtAdminState 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4
Setting this object to Enable will cause port to be enabled. Setting this object to Disable will cause the port to be disabled. When read this object will return the state of the object per the last request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortMgmtOperState 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.5
Get port operational status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notOperational(1), operational(2)  

rptrPortMgmtPortType 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.6
Uniquely defines the repeater port type. A authoritative identification for a port type. By convention, this value is allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides an easy and unambiguous means to determine the type of repeater port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

rptrPortStats 1.3.6.1.4.1.52.4.1.1.1.4.3.2
OBJECT IDENTIFIER    

rptrPortPktStatsTbl 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1
Provides repeater port packet statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortPktStatsEntry

rptrPortPktStatsEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1
Provides basic statistics for a specific port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortPktStatsEntry  

rptrPortPktStatsPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortPktStatsPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortPktStatsPackets 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.3
Get this port's total received packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortPktStatsBytes 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.4
Get this port's total received bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortPktStatsColls 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.5
Get this port's total collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortPktStatsErrors 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.6
Get this port's total errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortPktStatsAlign 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.7
Get this port's total frame alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortPktStatsCRC 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.8
Get this port's total CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortPktStatsOOW 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.9
Get this port's total out-of-window collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortPktStatsBroadcasts 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.10
Get this port's total received broadcast packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortPktStatsMulticasts 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.11
Get this port's total received multicast packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortProtocolTbl 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2
Provides statistics about the protocols seen by the different ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortProtocolEntry

rptrPortProtocolEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1
An entry containing objects pertaining to statistics about protocols seen by different ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortProtocolEntry  

rptrPortProtocolPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortProtocolPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortProtocolOSI 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.3
Get this port's total received OSI protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortProtocolNovell 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.4
Get this port's total received Novell protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortProtocolBanyan 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.5
Get this port's total received Banyan protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortProtocolDECNet 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.6
Get this port's total received DECNet protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortProtocolXNS 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.7
Get this port's total received XNS protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortProtocolIP 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.8
Get this port's total received TCP/IP protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortProtocolCtron 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.9
Get this port's total received CTRON Management protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortProtocolAppletalk 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.10
Get this port's total received Appletalk protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortProtocolOther 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.11
Get this port's total received unknown protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortFrameSzTbl 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3
Provides repeater port frame size statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortFrameSzEntry

rptrPortFrameSzEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1
Describes a set of frame size statistics for a specific port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortFrameSzEntry  

rptrPortFrameSzPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortFrameSzPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortFrameSzRunt 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.3
Get this port's total received packets of size less than 64 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortFrameSz64To127 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.4
Get this port's total received packets of size between 64 and 127 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortFrameSz128To255 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.5
Get this port's total received packets of size between 128 and 255 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortFrameSz256To511 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.6
Get this port's total received packets of size between 256 and 511 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortFrameSz512To1023 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.7
Get this port's total received packets of size between 512 and 1023 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortFrameSz1024To1518 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.8
Get this port's total received packets of size between 1024 and 1518 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortFrameSzGiant 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.9
Get this port's total received packets of size greater than 1518 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rptrPortAlarmTable 1.3.6.1.4.1.52.4.1.1.1.4.3.3
A list of port alarm objects for this repeater node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortAlarmEntry

rptrPortAlarmEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1
An entry containing objects pertaining to port alarm objects for a port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortAlarmEntry  

rptrPortAlarmPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortAlarmPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortAlarmTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortAlarmTrafThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.4
The maximum number of packets that will be allowed before an alarm is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrPortAlarmTrafPortDisable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.5
Set will permit a port to be disabled on a traffic alarm condition. Get will show whether the port disabling is allowed or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortAlarmCollEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.6
Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortAlarmCollThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7
The collision threshold is the maximum number of collisions within the time base that will be allowed before an alaram is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999999  

rptrPortAlarmCollPortDisable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8
Set will permit a port to be disabled on a collision alarm condition. Get will show whether the port disabling is allowed or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortAlarmErrEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.9
Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortAlarmErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10
Get/Set the percentage of errors per good packet within the timebase that will cause an alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rptrPortAlarmErrSource 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11
Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrPortAlarmErrPortDisable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.12
Set will permit a port to be disabled on an error alarm condition. Get will show whether the port disabling is allowed or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortAlarmBroadEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.13
Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortAlarmBroadThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.14
The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrPortAlarmBroadPortDisable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.15
Set will permit a port to be disabled on a broadcast alarm condition. Get will show whether the port disabling is allowed or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortRedundTable 1.3.6.1.4.1.52.4.1.1.1.4.3.4
A list of port redundancy objects for this repeater node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortRedundEntry

rptrPortRedundEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1
An entry containing objects pertaining to port redundancy for a port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortRedundEntry  

rptrPortRedundPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortRedundPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortRedundCrctNum 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.3
Get/Set redundant circuit number of redundant circuit that port is or is to be associated with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rptrPortRedundType 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.4
Get/Set redundant port type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notUsed(1), primary(2), backup(3)  

rptrPortRedundStatus 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.5
Get/Set redundant port status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notUsed(1), active(2), inactive(3)  

rptrPortSrcAddrTable 1.3.6.1.4.1.52.4.1.1.1.4.3.5
A list of port source address objects for this repeater node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortSrcAddrEntry

rptrPortSrcAddrEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1
An entry containing objects pertaining to port source address objects for a port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortSrcAddrEntry  

rptrPortSrcAddrPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSrcAddrPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSrcAddrTopoState 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.3
Returns the topological state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER station(1), trunk(2)  

rptrPortSrcAddrForceTrunk 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4
When this object is set to Force it causes the port to be placed into a Trunk topological state whether the network traffic would warrant such a state or not. When this object is set to NoForce it allows the port to assume the topological state it would naturally assume based on the network activity across it. When read this object reports the current setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noForce(1), force(2)  

rptrPortSrcAddrActiveUsers 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.5
Returns the total number of active users seen by this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSrcAddrListTable 1.3.6.1.4.1.52.4.1.1.1.4.3.6
This table provides information about the source addresses that have been seen by the differnt ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortSrcAddrListEntry

rptrPortSrcAddrListEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1
A specific source address that has been seen
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortSrcAddrListEntry  

rptrPortSrcAddrListId 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.1
Returns an index associated with the number of address to be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSrcAddrListPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.2
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSrcAddrListPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.3
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSrcAddrAddressList 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.4
Returns a source address seen on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

rptrPortHardwareTable 1.3.6.1.4.1.52.4.1.1.1.4.3.7
A list of port hardware objects for this repeater port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortHardwareEntry

rptrPortHardwareEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1
An entry containing objects pertaining to port hardware for a hardware port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortHardwareEntry  

rptrPortHardwarePortId 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortHardwarePortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortHardwareSegStatus 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.3
Returns port segmentation status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSegmented(1), segmented(2)  

rptrPortHardwareLinkStatus 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.4
Returns port link status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notLinked(1), linked(2), notApplicable(3)  

rptrPortTrap 1.3.6.1.4.1.52.4.1.1.1.4.3.8
OBJECT IDENTIFIER    

rptrPortHwTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1
OBJECT IDENTIFIER    

rptrPortSaTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2
OBJECT IDENTIFIER    

rptrPortHwTrapTable 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1
A list of trap enable/disable at the port level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortHwTrapEntry

rptrPortHwTrapEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1
Individual trap entries for port group enable/disable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortHwTrapEntry  

rptrPortHwTrapSetPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortHwTrapSetPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


rptrPortHwTrapSetSeg 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.4
Enables and disables segmentation traps for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortSaTrapTable 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1
A list of trap enable/disable at the port level
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortSaTrapEntry

rptrPortSaTrapEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1
Individual trap entries for port group enable/disable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortSaTrapEntry  

rptrPortSaTrapSetPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.1
Returns an index to a port for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSaTrapSetPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.2
Returns an index to a port group for which the information in this table pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSaTrapSetSrcaddr 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.3
Enables and disables source address traps for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rptrPortSecurity 1.3.6.1.4.1.52.4.1.1.1.4.3.9
OBJECT IDENTIFIER    

rptrPortSecurityTable 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1
This table defines status of the source lock security.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortSecurityEntry

rptrPortSecurityEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1
Defines lock status for this particular entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortSecurityEntry  

rptrPortSecurityPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.1
The port Group ID for which this source address lock entry pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSecurityPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.2
The port ID for which this source address lock entry pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSecurityLockStatus 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.3
Defines the lock status for this particular port entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unlock(1), lock(2)  

rptrPortSecurityLockAddAddress 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4
Setting a value to this object will cause a new entry to be added to the rptrPortSecurityListTable. When read this object will display an OCTET STRING of SIZE 6 with each octet containing a 0. In general it is possible to add addresses at anytime. However there are several instances where the firmware and or hardware can not support the operation. In these instances an error will be returned if a addition is attempted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

rptrPortSecurityLockDelAddress 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.5
Setting a value to this object will cause corresponding entry in the rptrPortSecurityListTable to be deleted. When read this object returns an OCTET STRING of length 6 with each octet having the value '0'. In general it is possible to delete locked addresses at any time. however there are instances where it is not supported in which case an error will be returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

rptrPortSecurityDisableOnViolation 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.6
Designates whether port is disabled if its source address is violated. A source address violation occurs when a address is detected which is not in the source address list for this port. If the port is disabled due to the source address violation it can be enabled by setting rptrPortMgmtAdminState.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noDisable(1), disable(2)  

rptrPortSecurityFullSecEnabled 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.7
A port that is set to full security and is locked will scramble ALL packets, which are not contained in the expected address list, including broadcasts and multicasts. A port that is set to partial security will allow broadcasts and multicasts to repeat unscrambled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER partialSecurity(1), fullSecurity(2)  

rptrPortSecuritySecureState 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.8
The secure state of the port. If the port is secure(1), it can be locked in order to enable security. A nonSecure(2) port cannot be locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER secure(1), nonSecure(2)  

rptrPortSecurityForceNonSecure 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.9
The force non-secure state of port. If the port is Forced, Non-Secure via a value of forceNonSecure(2), it is put into a Non-Secure state, in which case it cannot be locked. If a port is not forced noForce(1), then it will take on its natural state, according to the traffic flow on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noForce(1), forceNonSecure(2)  

rptrPortSecurityLearnState 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.10
The learn state of the port. This object will only be applied to a port that is unlocked. If set to learn(1), all addresses are deleted on the port and learning begins once again. If it is set to noLearn(2), learning stops on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER learn(1), noLearn(2)  

rptrPortSecurityLearnMode 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.11
The learn mode of the port. If set to oneTime(1), the port is capable of learning two addresses and securing on both destination and source addresses (upon locking port). If set to continuous(2), all addresses are initially deleted and the port continuously replaces the existing secure source address with the latest source address it sees.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oneTime(1), continuous(2)  

rptrPortSecurityListTable 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2
This table defines a list of all source address locks maintained for the specified port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortSecurityListEntry

rptrPortSecurityListEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1
An entry containing objects pertaining to source address locks for a port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortSecurityListEntry  

rptrPortSecurityListPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.1
The port group for which this security list entry pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSecurityListPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.2
The port ID for which this source address lock list pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSecurityListIndex 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.3
A unique index for the source address entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortSecurityListAddress 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.4
Defines the particular source address that has been locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

rptrPortAssoc 1.3.6.1.4.1.52.4.1.1.1.4.4
OBJECT IDENTIFIER    

rptrPortAssocTable 1.3.6.1.4.1.52.4.1.1.1.4.4.1
This table defines the port association for those switching MIMs that support this functionality.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RptrPortAssocEntry

rptrPortAssocEntry 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1
Describes a particular port association entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RptrPortAssocEntry  

rptrPortAssocBoard 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.1
The board number for which this port association information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rptrPortAssocStatus 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.2
This object describes the status of the user selectable port. On a TPXMIM34 this is port 13 which may either be an EPIM or default configuration. A value of defaultPort(1) restores the default configuration. A value of otherPort(2) may imply the use of the EPIM connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER defaultPort(1), otherPort(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor