REMOTEACCESS-MIB

File: REMOTEACCESS-MIB.mib (247184 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RMON-MIB
RFC-1212 RFC-1215

Imported symbols

enterprises IpAddress Counter
TimeTicks DisplayString transmission
ifIndex rmon OBJECT-TYPE
TRAP-TYPE

Defined Types

MacAddress  
OCTET STRING    

PasswdsEntry  
SEQUENCE    
  passwdsOld DisplayString
  passwdsNew DisplayString

PortsEntry  
SEQUENCE    
  portsIndex INTEGER
  portsName DisplayString
  portsType INTEGER
  portsPhys INTEGER
  portsTxutil INTEGER 0..100000
  portsRxutil INTEGER 0..100000
  portsCompress INTEGER
  portsState INTEGER
  portsRxoctets Counter
  portsTxoctets Counter
  portsRxpackets Counter
  portsTxpackets Counter
  portsRxerrs Counter
  portsTxerrs Counter

ArpPlusPortsLanEntry  
SEQUENCE    
  portslanIndex INTEGER
  portslanName DisplayString
  portslanPriority INTEGER
  portslanLinespeed INTEGER
  portslanIpAddress IpAddress
  portslanIpMask IpAddress
  portslanIpMetric INTEGER
  portslanIpxNetwork OCTET STRING Size(4)
  portslanIpxType INTEGER

ArpPlusPortsHdlcEntry  
SEQUENCE    
  portshdlcIndex INTEGER
  portshdlcName DisplayString
  portshdlcPriority INTEGER
  portshdlcLinespeed INTEGER
  portshdlcCompression INTEGER
  portshdlcScramble INTEGER
  portshdlcBackupdemand INTEGER
  portshdlcDemandthresh INTEGER
  portshdlcDemandperiod INTEGER
  portshdlcIdlethresh INTEGER
  portshdlcIdleperiod INTEGER
  portshdlcBackupalert INTEGER
  portshdlcDemandpriority INTEGER
  portshdlcBackuppriority INTEGER
  portshdlcBackupnumber DisplayString
  portshdlcBackupMac MacAddress
  portshdlcIpAddress IpAddress
  portshdlcIpMask IpAddress
  portshdlcIpMetric INTEGER
  portshdlcIpxNetwork OCTET STRING Size(4)
  portshdlcIpxType INTEGER

ArpPlusPortsPppEntry  
SEQUENCE    
  portspppIndex INTEGER
  portspppName DisplayString
  portspppPriority INTEGER
  portspppLinespeed INTEGER
  portspppIpAddress IpAddress
  portspppIpMask IpAddress
  portspppIpMetric INTEGER
  portspppIpxNetwork OCTET STRING Size(4)
  portspppIpxType INTEGER
  portspppBaud INTEGER
  portspppDataBits INTEGER
  portspppStopBits INTEGER
  portspppFlowControl INTEGER
  portspppTxParity INTEGER
  portspppRxParity INTEGER
  portspppRemoteUnit INTEGER
  portspppIPRemoteAddress IpAddress

PortstaEntry  
SEQUENCE    
  portstaIndex INTEGER
  portstaName DisplayString
  portstaPriority INTEGER
  portstaLinespeed INTEGER
  portstaCompression INTEGER
  portstaScramble INTEGER
  portstaDemand INTEGER
  portstaDemandthresh INTEGER
  portstaDemandperiod INTEGER
  portstaIdlethresh INTEGER
  portstaIdleperiod INTEGER
  portstaDemandpriority INTEGER
  portstaDialtimeout INTEGER
  portstaAtzstring DisplayString
  portstaSpidstring DisplayString

ArpPlusPortsSlipEntry  
SEQUENCE    
  portsslipIndex INTEGER
  portsslipName DisplayString
  portsslipPriority INTEGER
  portsslipLinespeed INTEGER
  portsslipIpAddress IpAddress
  portsslipIpMask IpAddress
  portsslipIpMetric INTEGER
  portsslipBaud INTEGER
  portsslipDataBits INTEGER
  portsslipStopBits INTEGER
  portsslipFlowControl INTEGER
  portsslipTxParity INTEGER
  portsslipRxParity INTEGER
  portsslipMTU INTEGER
  portsslipRIPPrivate INTEGER
  portsslipIPRemoteAddress IpAddress

ArpPlusPortsAsyncEntry  
SEQUENCE    
  portsasyncIndex INTEGER
  portsasyncName DisplayString
  portsasyncBaud INTEGER
  portsasyncDataBits INTEGER
  portsasyncStopBits INTEGER
  portsasyncFlowControl INTEGER
  portsasyncTxParity INTEGER
  portsasyncRxParity INTEGER

PortsvoiceEntry  
SEQUENCE    
  portsvoiceIndex INTEGER
  portsvoiceName DisplayString
  portsvoiceCallsPermitted INTEGER
  portsvoiceEncoding INTEGER
  portsvoiceDialMode INTEGER

PortstpadEntry  
SEQUENCE    
  portstpadIndex INTEGER
  portstpadName DisplayString
  portstpadBaud INTEGER
  portstpadDataBits INTEGER
  portstpadStopBits INTEGER
  portstpadParity INTEGER
  portstpadTxFlowControl INTEGER
  portstpadRxFlowControl INTEGER
  portstpadX25MinLCN INTEGER
  portstpadX25MaxLCN INTEGER

MlinkEntry  
SEQUENCE    
  mlinkIndex INTEGER
  mlinkName DisplayString
  mlinkNumberOfPorts INTEGER
  mlinkInFrames Counter
  mlinkOutFrames Counter
  mlinkInDiscards Counter
  mlinkState INTEGER

FilterEntry  
SEQUENCE    
  filterDest OCTET STRING Size(6)
  filterSource OCTET STRING Size(6)
  filterPrimary INTEGER
  filterType INTEGER
  filterRoute DisplayString
  filterPacketcount INTEGER
  filterBytecount INTEGER

FilterTypeEntry  
SEQUENCE    
  filtertypeIndex INTEGER
  filtertypeClass INTEGER
  filtertypeLsap INTEGER
  filtertypeMode INTEGER

AuthorisedEntry  
SEQUENCE    
  authorisedIndex OCTET STRING Size(6)
  authorisedAddress OCTET STRING Size(6)
  authorisedMode INTEGER

AutocallMacEntry  
SEQUENCE    
  autocallMacIndex OCTET STRING Size(2)
  autocallMacDefault INTEGER
  autocallMacBumpable INTEGER
  autocallMacIdle INTEGER
  autocallMacIdleThreshold INTEGER 0..1000
  autocallMacAddress MacAddress
  autocallMacIsdn DisplayString
  autocallMacMode INTEGER

AutocallIpEntry  
SEQUENCE    
  autocallIpIndex OCTET STRING Size(2)
  autocallIpBumpable INTEGER
  autocallIpIdle INTEGER
  autocallIpIdleThreshold INTEGER 0..1000
  autocallIpAddress IpAddress
  autocallIpMask IpAddress
  autocallIpInverse INTEGER
  autocallIpIsdn DisplayString
  autocallIpMode INTEGER

AutocallIpxSapEntry  
SEQUENCE    
  autocallIpxSapIndex OCTET STRING Size(2)
  autocallIpxSapServer DisplayString
  autocallIpxSapNetwork OCTET STRING Size(4)
  autocallIpxSapNode MacAddress
  autocallIpxSapSocket OCTET STRING Size(2)
  autocallIpxSapService OCTET STRING Size(2)
  autocallIpxSapHops INTEGER 1..16
  autocallIpxSapIsdn DisplayString
  autocallIpxSapFrameType INTEGER
  autocallIpxSapDirectNetwork OCTET STRING Size(4)
  autocallIpxSapRouterMac MacAddress
  autocallIpxSapNearest INTEGER
  autocallIpxSapPpp INTEGER
  autocallIpxSapIsdnType INTEGER
  autocallIpxSapMode INTEGER

AutocallIpxEntry  
SEQUENCE    
  autocallIpxIndex OCTET STRING Size(2)
  autocallIpxNetwork OCTET STRING Size(4)
  autocallIpxNode MacAddress
  autocallIpxPacketType OCTET STRING Size(1)
  autocallIpxTransportControl INTEGER 1..16
  autocallIpxIsdn DisplayString
  autocallIpxBumpable INTEGER
  autocallIpxIdle INTEGER
  autocallIpxIdleThreshold INTEGER 0..1000
  autocallIpxDefault INTEGER
  autocallIpxFrameType INTEGER
  autocallIpxPpp INTEGER
  autocallIpxIsdnType INTEGER
  autocallIpxMode INTEGER

AutocallIpxRipEntry  
SEQUENCE    
  autocallIpxRipIndex OCTET STRING Size(2)
  autocallIpxRipNetwork OCTET STRING Size(4)
  autocallIpxRipHops INTEGER 1..16
  autocallIpxRipTicks INTEGER
  autocallIpxRipNode MacAddress
  autocallIpxRipIsdn DisplayString
  autocallIpxRipFrameType INTEGER
  autocallIpxRipDirectNetwork OCTET STRING Size(4)
  autocallIpxRipRouterMac MacAddress
  autocallIpxRipLinkTicks INTEGER
  autocallIpxRipPpp INTEGER
  autocallIpxRipIsdnType INTEGER
  autocallIpxRipMode INTEGER

AutocallDialEntry  
SEQUENCE    
  autocallDialIndex OCTET STRING Size(2)
  autocallDialCli DisplayString
  autocallDialIsdn DisplayString
  autocallDialBumpable INTEGER
  autocallDialIdle INTEGER
  autocallDialIdleThreshold INTEGER 0..1000
  autocallDialMode INTEGER

IsdnbandsEntry  
SEQUENCE    
  isdnbandsIndex INTEGER
  isdnbandsName DisplayString
  isdnbandsStarttime INTEGER
  isdnbandsEndtime INTEGER
  isdnbandsDays DisplayString
  isdnbandsAllowbackup INTEGER
  isdnbandsAllowdemand INTEGER
  isdnbandsAllowautocall INTEGER
  isdnbandsAllowlist INTEGER
  isdnbandsMode INTEGER

IsdnbandsBridgeListEntry  
SEQUENCE    
  isdnbandsBridgeListIndex INTEGER
  isdnbandsBridgeListBandName DisplayString
  isdnbandsBridgeListBridgeName DisplayString

ArpPlusIsdnNumbersEntry  
SEQUENCE    
  isdnnumbersIndex OCTET STRING Size(2)
  isdnnumbersName DisplayString
  isdnnumbersNumber1 DisplayString
  isdnnumbersNumber2 DisplayString
  isdnnumbersNumber3 DisplayString
  isdnnumbersNumber4 DisplayString
  isdnnumbersCall INTEGER
  isdnnumbersTesttime INTEGER
  isdnnumbersDays DisplayString
  isdnnumbersLasttest DisplayString
  isdnnumbersIpAddress IpAddress
  isdnnumbersIpMask IpAddress
  isdnnumbersIpMetric INTEGER
  isdnnumbersIpxNetwork OCTET STRING Size(4)
  isdnnumbersIpxType INTEGER
  isdnnumbersPpp INTEGER
  isdnnumbersRemoteIpAddress IpAddress
  isdnnumbersRemoteUnitType INTEGER
  isdnnumbersHdlcType INTEGER
  isdnnumbersPppAuthentication INTEGER
  isdnnumbersMaxCircuits INTEGER
  isdnnumbersMPEnable INTEGER
  isdnnumbersLearntED DisplayString
  isdnnumbersMode INTEGER
  isdnnumbersCallType1 INTEGER
  isdnnumbersCallType2 INTEGER
  isdnnumbersCallType3 INTEGER
  isdnnumbersCallType4 INTEGER

IsdnportsEntry  
SEQUENCE    
  isdnportsIndex INTEGER
  isdnportsDestination DisplayString
  isdnportsState INTEGER
  isdnportsConnTime TimeTicks
  isdnportsBackup INTEGER
  isdnportsDemand INTEGER
  isdnportsBumpable INTEGER
  isdnportsAlert INTEGER
  isdnportsPriority INTEGER
  isdnportsSourceMac MacAddress

IsdnhistoryEntry  
SEQUENCE    
  isdnhistoryIndex INTEGER
  isdnhistoryDestination DisplayString
  isdnhistoryTotalTime TimeTicks
  isdnhistoryTotalCalls INTEGER
  isdnhistoryFailedCalls INTEGER

IsdnCliEntry  
SEQUENCE    
  isdnCliIndex INTEGER
  isdnCliNumber DisplayString
  isdnCliMode INTEGER

IsdnlistsEntry  
SEQUENCE    
  isdnlistsIndex INTEGER
  isdnlistsBand DisplayString
  isdnlistsName DisplayString

IpRouteEntryCopy  
SEQUENCE    
  ipRouteDestCopy IpAddress
  ipRouteIfIndexCopy INTEGER
  ipRouteMetric1Copy INTEGER
  ipRouteMetric2Copy INTEGER
  ipRouteMetric3Copy INTEGER
  ipRouteMetric4Copy INTEGER
  ipRouteNextHopCopy IpAddress
  ipRouteTypeCopy INTEGER
  ipRouteProtoCopy INTEGER
  ipRouteAgeCopy INTEGER
  ipRouteMaskCopy IpAddress
  ipRouteMetric5Copy INTEGER
  ipRouteInfoCopy OBJECT IDENTIFIER
  ipRouteNextHopName DisplayString
  ipRouteAdvertise INTEGER

IpxRoutingTableEntry  
SEQUENCE    
  ipxRouteTarget OCTET STRING Size(4)
  ipxRouteHopCount INTEGER
  ipxRouteTicks INTEGER
  ipxRouteNextHopNetwork OCTET STRING Size(4)
  ipxRouteNextHopNode MacAddress
  ipxRouteType INTEGER
  ipxRoutePort DisplayString
  ipxRouteLinkType INTEGER
  ipxRouteIpxType INTEGER
  ipxRouteLinkTicks INTEGER
  ipxRouteMlink DisplayString
  ipxRouteMode INTEGER

IpxServicesTableEntry  
SEQUENCE    
  ipxServiceNetwork OCTET STRING Size(4)
  ipxServiceNode MacAddress
  ipxServiceSocket INTEGER
  ipxServiceName DisplayString
  ipxServiceType INTEGER
  ipxServiceHopCount INTEGER
  ipxServicePort DisplayString
  ipxServiceNextHopNetwork OCTET STRING Size(4)
  ipxServiceNextHopNode MacAddress
  ipxServiceIpxType INTEGER
  ipxServiceRTType INTEGER
  ipxServiceLinkType INTEGER
  ipxServiceMlink DisplayString
  ipxServiceMode INTEGER

IpxNearestTableEntry  
SEQUENCE    
  ipxNearestIndex INTEGER
  ipxNearestServer DisplayString
  ipxNearestMode INTEGER

PppExtLcpConfigTableEntry  
SEQUENCE    
  pppExtLcpLocalProtocolCompression INTEGER
  pppExtLcpLocalAddressCompression INTEGER
  pppExtLcpRemoteMRU INTEGER
  pppExtLcpRemoteProtocolCompression INTEGER
  pppExtLcpRemoteAddressCompression INTEGER
  pppExtLcpMinimumRestartPeriod INTEGER
  pppExtLcpMaximumRestartPeriod INTEGER
  pppExtLcpMaximumTerminateRequests INTEGER
  pppExtLcpMaximumConfigRequests INTEGER
  pppExtLcpMaximumConfigNaks INTEGER
  pppExtLcpLocalMRU INTEGER
  pppExtLcpLocalMagic INTEGER
  pppExtLcpRemoteMagic INTEGER
  pppExtLcpLocalMRUEnabled INTEGER
  pppExtLcpRemoteMRUEnabled INTEGER
  pppExtLcpLocalACCM INTEGER
  pppExtLcpRemoteACCM INTEGER
  pppExtLcpLocalACCMEnabled INTEGER
  pppExtLcpRemoteACCMEnabled INTEGER
  pppExtLcpLocalPAPEnabled INTEGER
  pppExtLcpRemotePAPEnabled INTEGER
  pppExtLcpLocalCHAPEnabled INTEGER
  pppExtLcpRemoteCHAPEnabled INTEGER

PppEchoConfigTableEntry  
SEQUENCE    
  pppEchoPeriod INTEGER
  pppEchoMaxNumberRetransmits INTEGER

PppIpcpConfigTableEntry  
SEQUENCE    
  ipcpLocalIPAddressNegotiation INTEGER
  ipcpRemoteIPAddressNegotiation INTEGER
  ipcpRemoteCompressionNegotiation INTEGER
  ipcpMinimumRestartPeriod INTEGER
  ipcpMaximumRestartPeriod INTEGER
  ipcpMaximumTerminateRequests INTEGER
  ipcpMaximumConfigRequests INTEGER
  ipcpMaximumConfigNaks INTEGER
  ipcpLocalCompressionNegotiation INTEGER
  ipcpRfc1172Negotiation INTEGER

PppIpxcpConfigTableEntry  
SEQUENCE    
  ipxcpLocalNetworkNumberNegotiation INTEGER
  ipxcpLocalNodeNumberNegotiation INTEGER
  ipxcpLocalRoutingProtocolNegotiation INTEGER
  ipxcpLocalRouterNameNegotiation INTEGER
  ipxcpRemoteNetworkNumberNegotiation INTEGER
  ipxcpRemoteNodeNumberNegotiation INTEGER
  ipxcpRemoteRoutingProtocolNegotiation INTEGER
  ipxcpRemoteRouterNameNegotiation INTEGER
  ipxcpConfigCompleteNegotiation INTEGER
  ipxcpAdmin INTEGER
  ipxcpMinimumRestartPeriod INTEGER
  ipxcpMaximumRestartPeriod INTEGER
  ipxcpMaximumTerminateRequests INTEGER
  ipxcpMaximumConfigRequests INTEGER
  ipxcpMaximumConfigNaks INTEGER
  ipxcpNodeNumber MacAddress

PppExtConfigTableEntry  
SEQUENCE    
  pppExtLinkAuthentication INTEGER
  pppExtEnableIp INTEGER
  pppExtEnableIpx INTEGER
  pppExtHdlcLayer INTEGER

IpFirewallStatusTableEntry  
SEQUENCE    
  ipFirewallStatusIndex INTEGER
  ipFirewallFilteredPackets Counter

IpFirewallConfigTableEntry  
SEQUENCE    
  ipFirewallConfigIndex INTEGER
  ipFirewallSourceAddress IpAddress
  ipFirewallSourceMask IpAddress
  ipFirewallLowerSourcePort INTEGER
  ipFirewallHigherSourcePort INTEGER
  ipFirewallDestinationAddress IpAddress
  ipFirewallDestinationMask IpAddress
  ipFirewallLowerDestinationPort INTEGER
  ipFirewallHigherDestinationPort INTEGER
  ipFirewallRouterName DisplayString
  ipFirewallMode INTEGER
  ipFirewallType INTEGER
  ipFirewallAction INTEGER
  ipFirewallBidir INTEGER
  ipFirewallTcpsyn INTEGER

IpxFirewallStatusTableEntry  
SEQUENCE    
  ipxFirewallStatusIndex INTEGER
  ipxFirewallFilteredPackets Counter

IpxFirewallConfigTableEntry  
SEQUENCE    
  ipxFirewallConfigIndex INTEGER
  ipxFirewallLowerSourceNetwork OCTET STRING Size(4)
  ipxFirewallHigherSourceNetwork OCTET STRING Size(4)
  ipxFirewallLowerSourceNode MacAddress
  ipxFirewallHigherSourceNode MacAddress
  ipxFirewallLowerSourceSocket OCTET STRING Size(2)
  ipxFirewallHigherSourceSocket OCTET STRING Size(2)
  ipxFirewallLowerDestinationNetwork OCTET STRING Size(4)
  ipxFirewallHigherDestinationNetwork OCTET STRING Size(4)
  ipxFirewallLowerDestinationNode MacAddress
  ipxFirewallHigherDestinationNode MacAddress
  ipxFirewallLowerDestinationSocket OCTET STRING Size(2)
  ipxFirewallHigherDestinationSocket OCTET STRING Size(2)
  ipxFirewallRouterName DisplayString
  ipxFirewallMode INTEGER
  ipxFirewallAction INTEGER
  ipxFirewallBidir INTEGER

UserCfgEntry  
SEQUENCE    
  usercfgIndex INTEGER
  usercfgName DisplayString
  usercfgMac MacAddress
  usercfgAllowed INTEGER
  usercfgMode INTEGER

DhcpWINSEntry  
SEQUENCE    
  dhcpWINSIndex INTEGER
  dhcpWINSAddr IpAddress

DhcpDNSEntry  
SEQUENCE    
  dhcpDNSIndex INTEGER
  dhcpDNSAddr IpAddress

DhcpAstatEntry  
SEQUENCE    
  dhcpAstatIpAddr IpAddress
  dhcpAstatIf INTEGER
  dhcpAstatHwAddr MacAddress
  dhcpAstatCID OCTET STRING
  dhcpAstatLife INTEGER

PppAuthTableEntry  
SEQUENCE    
  pppAuthIndex INTEGER
  pppAuthName DisplayString
  pppAuthClass INTEGER
  pppAuthLocalId DisplayString
  pppAuthLocalPw DisplayString
  pppAuthRemoteId DisplayString
  pppAuthRemotePw DisplayString
  pppAuthRetryPeriod INTEGER
  pppAuthRenegPeriod INTEGER
  pppAuthRetryCount INTEGER
  pppAuthMode INTEGER

DnsDomainTableEntry  
SEQUENCE    
  dnsDomainTableIndex INTEGER
  dnsDomainDomainName DisplayString
  dnsDomainProfileIndex INTEGER
  dnsDomainRemoteServer DisplayString
  dnsDomainPrimaryDNS IpAddress
  dnsDomainSecondaryDNS IpAddress
  dnsDomainMode INTEGER

DnsProfileEntry  
SEQUENCE    
  dnsProfileIndex INTEGER
  dnsProfileName DisplayString
  dnsProfileRemoteServer DisplayString
  dnsProfilePrimaryDNS IpAddress
  dnsProfileSecondaryDNS IpAddress
  dnsProfileMode INTEGER

TrapTableEntry  
SEQUENCE    
  trapIndex INTEGER
  trapAddr IpAddress
  trapPort INTEGER
  trapLogFull INTEGER
  trapLogThreshold INTEGER
  trapWarmStart INTEGER
  trapLinkDown INTEGER
  trapLinkUp INTEGER
  trapVoiceDown INTEGER
  trapVoiceUp INTEGER
  trapISDNDown INTEGER
  trapISDNUp INTEGER
  trapAlarm INTEGER
  trapQ931Fail INTEGER
  trapDASS2Fail INTEGER
  trapBriFail INTEGER
  trapLoginAuth INTEGER

PatEntry  
SEQUENCE    
  patIndex INTEGER
  patPort INTEGER
  patInternalIP IpAddress
  patInternalPort INTEGER
  patMode INTEGER

FilterInfo  
SEQUENCE    
  filterAgingtime INTEGER
  filterLearning INTEGER
  filterActiononmatch INTEGER
  filterFiltermcast INTEGER
  filterTypematching INTEGER
  filterTypematchaction INTEGER
  filterLearnsourceonmcast INTEGER
  filterFlushall INTEGER
  filterLearnnovell INTEGER

Abro600SystemInfo  
SEQUENCE    
  variant DisplayString
  version DisplayString
  unitname DisplayString
  save INTEGER
  standard INTEGER
  saverequired INTEGER
  date DisplayString
  time DisplayString
  dayoftheweek INTEGER
  managertimeout INTEGER
  unitipad IpAddress
  unitmacaddress MacAddress
  defaultalert INTEGER
  incallalert INTEGER
  publiccommunity DisplayString
  privatecommunity DisplayString
  trapaddress IpAddress
  trapport INTEGER
  lcdManagerLock INTEGER
  loopControl INTEGER
  novelltimeout INTEGER
  timeSinceReboot DisplayString

IpRipInfo  
SEQUENCE    
  ipInRipRequests Counter
  ipInRipResponses Counter
  ipInRipErrors Counter
  ipInRipDiscards Counter
  ipOutRipRequests Counter
  ipOutRipResponses Counter
  ipOutRipUpdates Counter
  ipOutRipErrors Counter
  ipOutRipDiscards Counter
  ipRoutingProtocol INTEGER
  ipRipLearning INTEGER

IpxInfo  
SEQUENCE    
  ipxInReceives Counter
  ipxInDelivers Counter
  ipxInDiscards Counter
  ipxInUnknownProtocols Counter
  ipxInHeaderErrors Counter
  ipxForwardDatagrams Counter
  ipxOutRequests Counter
  ipxOutNoRoutes Counter
  ipxOutDiscards Counter

IpxSapInfo  
SEQUENCE    
  ipxInSapRequests Counter
  ipxInSapResponses Counter
  ipxInSapNoServers Counter
  ipxInSapErrors Counter
  ipxInSapDiscards Counter
  ipxOutSapRequests Counter
  ipxOutSapResponses Counter
  ipxOutSapErrors Counter
  ipxOutSapDiscards Counter

IpxRipInfo  
SEQUENCE    
  ipxInRipRequests Counter
  ipxInRipResponses Counter
  ipxInRipErrors Counter
  ipxInRipTimeouts Counter
  ipxInRipDiscards Counter
  ipxOutRipRequests Counter
  ipxOutRipResponses Counter
  ipxOutRipUpdates Counter
  ipxOutRipErrors Counter
  ipxOutRipDiscards Counter

AbroSystemInfo  
SEQUENCE    
  variant DisplayString
  version DisplayString
  unitname DisplayString
  save INTEGER
  standard INTEGER
  saverequired INTEGER
  date DisplayString
  time DisplayString
  dayoftheweek INTEGER
  managertimeout INTEGER
  unitipad IpAddress
  unitmacaddress MacAddress
  defaultalert INTEGER
  incallalert INTEGER
  publiccommunity DisplayString
  privatecommunity DisplayString
  trapaddress IpAddress
  trapport INTEGER
  lcdManagerLock INTEGER
  loopControl INTEGER
  novelltimeout INTEGER
  timeSinceReboot DisplayString

AbroPortsLanEntry  
SEQUENCE    
  portslanName DisplayString
  portslanPriority INTEGER
  portslanLinespeed INTEGER

AbroPortsHdlcEntry  
SEQUENCE    
  portshdlcName DisplayString
  portshdlcPriority INTEGER
  portshdlcLinespeed INTEGER
  portshdlcCompression INTEGER
  portshdlcScramble INTEGER
  portshdlcBackupdemand INTEGER
  portshdlcDemandthresh INTEGER
  portshdlcDemandperiod INTEGER
  portshdlcIdlethresh INTEGER
  portshdlcIdleperiod INTEGER
  portshdlcBackupalert INTEGER
  portshdlcDemandpriority INTEGER
  portshdlcBackuppriority INTEGER
  portshdlcBackupnumber DisplayString
  portshdlcBackupMac MacAddress

AbroPortsPppEntry  
SEQUENCE    
  portspppName DisplayString
  portspppPriority INTEGER
  portspppLinespeed INTEGER

AbroIsdnNumbersEntry  
SEQUENCE    
  isdnnumbersName DisplayString
  isdnnumbersNumber1 DisplayString
  isdnnumbersNumber2 DisplayString
  isdnnumbersNumber3 DisplayString
  isdnnumbersNumber4 DisplayString
  isdnnumbersCall INTEGER
  isdnnumbersTesttime INTEGER
  isdnnumbersDays DisplayString
  isdnnumbersLasttest DisplayString

Abro500IsdnParamsInfo  
SEQUENCE    
  isdnParamsNetworkType INTEGER
  isdnParamsSpid1 DisplayString
  isdnParamsDirectoryNumber1 DisplayString
  isdnParamsSpid2 DisplayString
  isdnParamsDirectoryNumber2 DisplayString
  isdnParamsReportBusy INTEGER
  isdnParamsIncomingDov INTEGER
  isdnParamsMaxCallTime INTEGER

Abro600IsdnParamsInfo  
SEQUENCE    
  isdnParamsNetworkType INTEGER
  isdnParamsSpid1 DisplayString
  isdnParamsDirectoryNumber1 DisplayString
  isdnParamsSpid2 DisplayString
  isdnParamsDirectoryNumber2 DisplayString
  isdnParamsSpid3 DisplayString
  isdnParamsDirectoryNumber3 DisplayString
  isdnParamsSpid4 DisplayString
  isdnParamsDirectoryNumber4 DisplayString
  isdnParamsMaxCallTime INTEGER
  isdnParamsTokenRefill INTEGER
  isdnParamsTokenValue INTEGER
  isdnParamsTokenRemain INTEGER

Abro500IsdnParamsMsn  
SEQUENCE    
  isdnParamsMsnLan DisplayString
  isdnParamsMsnVoice DisplayString
  isdnParamsMsnSend INTEGER
  isdnParamsMsnCheck INTEGER

Abro500IsdnParamsSubAddr  
SEQUENCE    
  isdnParamsSubAddrLan DisplayString
  isdnParamsSubAddrVoice DisplayString
  isdnParamsSubAddrSend INTEGER
  isdnParamsSubAddrCheck INTEGER
  isdnParamsSubAddrType INTEGER

EntryStatus  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)    

Defined Values

sonix 1.3.6.1.4.1.559
OBJECT IDENTIFIER    

sonixMibs 1.3.6.1.4.1.559.1
OBJECT IDENTIFIER    

registration 1.3.6.1.4.1.559.2
OBJECT IDENTIFIER    

cscmInfo 1.3.6.1.4.1.559.3
OBJECT IDENTIFIER    

regArpeggio 1.3.6.1.4.1.559.2.10
OBJECT IDENTIFIER    

arpStandard 1.3.6.1.4.1.559.2.10.1
OBJECT IDENTIFIER    

arpFocus 1.3.6.1.4.1.559.2.10.2
OBJECT IDENTIFIER    

arpOffice 1.3.6.1.4.1.559.2.10.3
OBJECT IDENTIFIER    

arpPlus 1.3.6.1.4.1.559.2.10.4
OBJECT IDENTIFIER    

arpMultiLan 1.3.6.1.4.1.559.2.10.5
OBJECT IDENTIFIER    

arpLite 1.3.6.1.4.1.559.2.10.6
OBJECT IDENTIFIER    

arpPlusRPrimary 1.3.6.1.4.1.559.2.10.7
OBJECT IDENTIFIER    

arpPlusRBasic 1.3.6.1.4.1.559.2.10.8
OBJECT IDENTIFIER    

officeConnect 1.3.6.1.4.1.559.2.13
OBJECT IDENTIFIER    

tftp 1.3.6.1.2.1.16.19
OBJECT IDENTIFIER    

officeConnectRemote510s 1.3.6.1.4.1.559.2.13.1
OBJECT IDENTIFIER    

officeConnectRemote520s 1.3.6.1.4.1.559.2.13.2
OBJECT IDENTIFIER    

officeConnectRemote530s 1.3.6.1.4.1.559.2.13.3
OBJECT IDENTIFIER    

officeConnectRemote510u 1.3.6.1.4.1.559.2.13.4
OBJECT IDENTIFIER    

officeConnectRemote520u 1.3.6.1.4.1.559.2.13.5
OBJECT IDENTIFIER    

officeConnectRemote530u 1.3.6.1.4.1.559.2.13.6
OBJECT IDENTIFIER    

officeConnectRemote531s 1.3.6.1.4.1.559.2.13.7
OBJECT IDENTIFIER    

officeConnectRemote531u 1.3.6.1.4.1.559.2.13.8
OBJECT IDENTIFIER    

accessBuilder 1.3.6.1.4.1.559.2.14
OBJECT IDENTIFIER    

accessBuilderRemoteUser400s 1.3.6.1.4.1.559.2.14.1
OBJECT IDENTIFIER    

accessBuilderRemoteUser400u 1.3.6.1.4.1.559.2.14.2
OBJECT IDENTIFIER    

accessBuilderInternet400s 1.3.6.1.4.1.559.2.14.3
OBJECT IDENTIFIER    

accessBuilderInternet400u 1.3.6.1.4.1.559.2.14.4
OBJECT IDENTIFIER    

accessBuilderRemoteOffice500 1.3.6.1.4.1.559.2.14.5
OBJECT IDENTIFIER    

accessBuilderRemoteOffice600 1.3.6.1.4.1.559.2.14.6
OBJECT IDENTIFIER    

accessBuilderRemoteOffice700 1.3.6.1.4.1.559.2.14.7
OBJECT IDENTIFIER    

accessBuilder7000BriBridgeRouter 1.3.6.1.4.1.559.2.14.8
OBJECT IDENTIFIER    

accessBuilder7000PriBridgeRouter 1.3.6.1.4.1.559.2.14.9
OBJECT IDENTIFIER    

serviceConnect2000 1.3.6.1.4.1.559.2.15
OBJECT IDENTIFIER    

serviceConnect2000Base 1.3.6.1.4.1.559.2.15.1
OBJECT IDENTIFIER    

serviceConnect2000BaseBri 1.3.6.1.4.1.559.2.15.1.1
OBJECT IDENTIFIER    

serviceConnect2000BasePri 1.3.6.1.4.1.559.2.15.1.2
OBJECT IDENTIFIER    

remoteaccessMib 1.3.6.1.4.1.559.1.2
OBJECT IDENTIFIER    

system 1.3.6.1.4.1.559.1.2.1
OBJECT IDENTIFIER    

ports 1.3.6.1.4.1.559.1.2.2
OBJECT IDENTIFIER    

bridge 1.3.6.1.4.1.559.1.2.3
OBJECT IDENTIFIER    

traps 1.3.6.1.4.1.559.1.2.4
OBJECT IDENTIFIER    

alarms 1.3.6.1.4.1.559.1.2.4.1
OBJECT IDENTIFIER    

isdnFailCause 1.3.6.1.4.1.559.1.2.4.2
OBJECT IDENTIFIER    

radius 1.3.6.1.4.1.559.1.2.4.3
OBJECT IDENTIFIER    

login 1.3.6.1.4.1.559.1.2.4.4
OBJECT IDENTIFIER    


filter 1.3.6.1.4.1.559.1.2.3.2
OBJECT IDENTIFIER    

authorised 1.3.6.1.4.1.559.1.2.3.3
OBJECT IDENTIFIER    

isdn 1.3.6.1.4.1.559.1.2.3.4
OBJECT IDENTIFIER    

autocall 1.3.6.1.4.1.559.1.2.3.4.1
OBJECT IDENTIFIER    

isdnbands 1.3.6.1.4.1.559.1.2.3.4.2
OBJECT IDENTIFIER    

isdnnumbers 1.3.6.1.4.1.559.1.2.3.4.3
OBJECT IDENTIFIER    

isdnports 1.3.6.1.4.1.559.1.2.3.4.4
OBJECT IDENTIFIER    

isdnhistory 1.3.6.1.4.1.559.1.2.3.4.5
OBJECT IDENTIFIER    

isdncla 1.3.6.1.4.1.559.1.2.3.4.6
OBJECT IDENTIFIER    

isdnlists 1.3.6.1.4.1.559.1.2.3.4.7
OBJECT IDENTIFIER    

isdnParams 1.3.6.1.4.1.559.1.2.3.4.8
OBJECT IDENTIFIER    

bootp 1.3.6.1.4.1.559.1.2.3.4.9
OBJECT IDENTIFIER    

ip 1.3.6.1.4.1.559.1.2.1.25
OBJECT IDENTIFIER    

iprip 1.3.6.1.4.1.559.1.2.1.25.1
OBJECT IDENTIFIER    

ipx 1.3.6.1.4.1.559.1.2.1.26
OBJECT IDENTIFIER    

ipxrip 1.3.6.1.4.1.559.1.2.1.26.11
OBJECT IDENTIFIER    

ipxrt 1.3.6.1.4.1.559.1.2.1.26.12
OBJECT IDENTIFIER    

ipxsap 1.3.6.1.4.1.559.1.2.1.26.13
OBJECT IDENTIFIER    

ipxsapt 1.3.6.1.4.1.559.1.2.1.26.14
OBJECT IDENTIFIER    

ipxnear 1.3.6.1.4.1.559.1.2.1.26.15
OBJECT IDENTIFIER    

pppext 1.3.6.1.4.1.559.1.2.1.27
OBJECT IDENTIFIER    

firewall 1.3.6.1.4.1.559.1.2.1.28
OBJECT IDENTIFIER    

users 1.3.6.1.4.1.559.1.2.1.29
OBJECT IDENTIFIER    

ipnat 1.3.6.1.4.1.559.1.2.1.32
OBJECT IDENTIFIER    

dhcpserver 1.3.6.1.4.1.559.1.2.1.33
OBJECT IDENTIFIER    

dnsproxy 1.3.6.1.4.1.559.1.2.1.35
OBJECT IDENTIFIER    

memoryusage 1.3.6.1.4.1.559.1.2.1.36
OBJECT IDENTIFIER    

traptable 1.3.6.1.4.1.559.1.2.1.37
A table of trap addresses, ports and event-masks.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapTableEntry

ppp 1.3.6.1.2.1.10.23
OBJECT IDENTIFIER    

variant 1.3.6.1.4.1.559.1.2.1.1
Product variant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

version 1.3.6.1.4.1.559.1.2.1.2
Product version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

unitname 1.3.6.1.4.1.559.1.2.1.3
The name of the unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

save 1.3.6.1.4.1.559.1.2.1.4
Save current configuration to NVRAM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

standard 1.3.6.1.4.1.559.1.2.1.5
Restore standard configuration, erasing NVRAM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

saverequired 1.3.6.1.4.1.559.1.2.1.6
Have changes been made which need to be save to NVRAM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

date 1.3.6.1.4.1.559.1.2.1.7
Real-time clock date. (Format dd/mm/yyyy).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

time 1.3.6.1.4.1.559.1.2.1.8
Real-time clock time. (Format hh:mm:ss).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

dayoftheweek 1.3.6.1.4.1.559.1.2.1.9
Real-time clock day.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sunday(1), monday(2), tuesday(3), wednesday(4), thursday(5), friday(6), saturday(7)  

managertimeout 1.3.6.1.4.1.559.1.2.1.10
The time after which the manager will timeout if there is no activity. Set this to 0 for no timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

unitipad 1.3.6.1.4.1.559.1.2.1.11
The Network port ip address of the unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

unitmacaddress 1.3.6.1.4.1.559.1.2.1.12
The MAC address of the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

defaultalert 1.3.6.1.4.1.559.1.2.1.13
Alert LED action.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1), beep(2)  

incallalert 1.3.6.1.4.1.559.1.2.1.14
Incoming call Alert LED action.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1), beep(2)  

publiccommunity 1.3.6.1.4.1.559.1.2.1.15
Community for reading MIB entries. This string will not be returned, but may be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

privatecommunity 1.3.6.1.4.1.559.1.2.1.16
Community for reading and writing MIB entries. This string will not be returned, but may be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

trapaddress 1.3.6.1.4.1.559.1.2.1.17
The IP Address of the default management station to which all traps will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

trapport 1.3.6.1.4.1.559.1.2.1.18
The port on the default management station to which all traps will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lcdManagerLock 1.3.6.1.4.1.559.1.2.1.19
Defines whether keypad operation is allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

loopControl 1.3.6.1.4.1.559.1.2.1.20
When enabled Loop Control allows a physical loop to exist without causing broadcast storms by preventing frames received on one WAN/ISDN port being retransmitted on other WAN/ISDN ports (useful when using multiple ISDN circuits).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

novelltimeout 1.3.6.1.4.1.559.1.2.1.21
The time after which Novell session emulation will timeout if there is no activity. Set this to 0 for no timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

timeSinceReboot 1.3.6.1.4.1.559.1.2.1.22
Time since last reboot. (Format hh:mm:ss).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

passwdsTable 1.3.6.1.4.1.559.1.2.1.23
A table of manager passwords. In fact, only one entry in the table is allowed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PasswdsEntry

passwdsEntry 1.3.6.1.4.1.559.1.2.1.23.1
A list of manager passwords.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PasswdsEntry  

passwdsOld 1.3.6.1.4.1.559.1.2.1.23.1.1
The current manager password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

passwdsNew 1.3.6.1.4.1.559.1.2.1.23.1.2
The new manager password. To change the password, a new table entry must be added, with both the old password and the new password in the same SET. The table will always appear empty.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

portsTable 1.3.6.1.4.1.559.1.2.2.1
A table of configured physical ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortsEntry

portsEntry 1.3.6.1.4.1.559.1.2.2.1.1
A list of port configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortsEntry  

portsIndex 1.3.6.1.4.1.559.1.2.2.1.1.1
The physical port index, in the range 1 to number-of-ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portsName 1.3.6.1.4.1.559.1.2.2.1.1.2
The port name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

portsType 1.3.6.1.4.1.559.1.2.2.1.1.3
The configured type of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), async(2), hdlc(3), ppp(4), ethernet(5), ta(6), repeater(7), voice(8), slip(9), slipMMIauto(10), tpad(11)  

portsPhys 1.3.6.1.4.1.559.1.2.2.1.1.4
The connector type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), v35(1), x21(2), v24(3), isdn(4), aui(5), tenBase2(6), tenBaseT(7), analogue(8)  

portsTxutil 1.3.6.1.4.1.559.1.2.2.1.1.5
The percentage of the port transmit capacity being used multiplied by 1000.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portsRxutil 1.3.6.1.4.1.559.1.2.2.1.1.6
The percentage of the port receive capacity being used multiplied by 1000.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portsCompress 1.3.6.1.4.1.559.1.2.2.1.1.7
For ports operating with LempelZiv compression, this is the compression ratio multiplied by 10.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portsState 1.3.6.1.4.1.559.1.2.2.1.1.8
The operational state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), up(1), down(2)  

portsRxoctets 1.3.6.1.4.1.559.1.2.2.1.1.9
The number of received octets on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portsTxoctets 1.3.6.1.4.1.559.1.2.2.1.1.10
The number of transmitted octets on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portsRxpackets 1.3.6.1.4.1.559.1.2.2.1.1.11
The number of received packets on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portsTxpackets 1.3.6.1.4.1.559.1.2.2.1.1.12
The number of transmitted packets on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portsRxerrs 1.3.6.1.4.1.559.1.2.2.1.1.13
The number of receive errors on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portsTxerrs 1.3.6.1.4.1.559.1.2.2.1.1.14
The number of transmit errors on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portslanTable 1.3.6.1.4.1.559.1.2.2.2
A table of configured lan ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpPlusPortsLanEntry

portslanEntry 1.3.6.1.4.1.559.1.2.2.2.1
A list of lan port configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArpPlusPortsLanEntry  

portslanIndex 1.3.6.1.4.1.559.1.2.2.2.1.1
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portslanName 1.3.6.1.4.1.559.1.2.2.2.1.2
The name of the lan port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

portslanPriority 1.3.6.1.4.1.559.1.2.2.2.1.3
The spanning tree priority of this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portslanLinespeed 1.3.6.1.4.1.559.1.2.2.2.1.4
The linespeed of this port. Normally this should be 10000000 bits/second
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portslanIpAddress 1.3.6.1.4.1.559.1.2.2.2.1.5
The IP Address assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portslanIpMask 1.3.6.1.4.1.559.1.2.2.2.1.6
The IP Address Mask assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portslanIpMetric 1.3.6.1.4.1.559.1.2.2.2.1.7
The IP routing metric assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portslanIpxNetwork 1.3.6.1.4.1.559.1.2.2.2.1.8
The IPX Network Address assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

portslanIpxType 1.3.6.1.4.1.559.1.2.2.2.1.9
The frame type used for IPX RIP and SAP messages emanating from this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernetII(1), ieee802dot2(2), novell802dot3(3), snap(4)  

portshdlcTable 1.3.6.1.4.1.559.1.2.2.3
A table of configured hdlc ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpPlusPortsHdlcEntry

portshdlcEntry 1.3.6.1.4.1.559.1.2.2.3.1
A list of hdlc port configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArpPlusPortsHdlcEntry  

portshdlcIndex 1.3.6.1.4.1.559.1.2.2.3.1.1
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portshdlcName 1.3.6.1.4.1.559.1.2.2.3.1.2
The name of the hdlc port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

portshdlcPriority 1.3.6.1.4.1.559.1.2.2.3.1.3
The spanning tree priority of this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portshdlcLinespeed 1.3.6.1.4.1.559.1.2.2.3.1.4
The linespeed of this port. This is used to calculate percentage load and Spanning tree costs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portshdlcCompression 1.3.6.1.4.1.559.1.2.2.3.1.5
If enabled, data is compressed using the Lempel Ziv algorithm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), lzStandard(1), lzWhite(2), stac(3)  

portshdlcScramble 1.3.6.1.4.1.559.1.2.2.3.1.6
If enabled, data is scrambled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

portshdlcBackupdemand 1.3.6.1.4.1.559.1.2.2.3.1.7
whether to use the dialup backup and/or demand.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), backup(1), demand(2), both(3)  

portshdlcDemandthresh 1.3.6.1.4.1.559.1.2.2.3.1.8
Threshold at which dialup demand is invoked, if Backup/Demand is set to demand or both in fraction of capacity * 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portshdlcDemandperiod 1.3.6.1.4.1.559.1.2.2.3.1.9
Time over which demand must exceed the demand threshold before call will be established. Measured in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portshdlcIdlethresh 1.3.6.1.4.1.559.1.2.2.3.1.10
Threshold at which once dialup demand is invoked, it will drop once load drops below fraction of capacity * 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portshdlcIdleperiod 1.3.6.1.4.1.559.1.2.2.3.1.11
Time over which demand must be less than the idle threshold before call will be dropped. Measured in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portshdlcBackupalert 1.3.6.1.4.1.559.1.2.2.3.1.12
If enabled, the alert light will be lit whilst a backup call is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1), beep(2)  

portshdlcDemandpriority 1.3.6.1.4.1.559.1.2.2.3.1.13
Priority of the demand call, since it may be bumped by a higher priority call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

portshdlcBackuppriority 1.3.6.1.4.1.559.1.2.2.3.1.14
Priority of the backup call, since it may be bumped by a higher priority call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

portshdlcBackupnumber 1.3.6.1.4.1.559.1.2.2.3.1.15
Telephone number(name of remote router) of the backup link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

portshdlcBackupMac 1.3.6.1.4.1.559.1.2.2.3.1.16
The MAC address of the backup bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

portshdlcIpAddress 1.3.6.1.4.1.559.1.2.2.3.1.17
The IP Address assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portshdlcIpMask 1.3.6.1.4.1.559.1.2.2.3.1.18
The IP Address Mask assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portshdlcIpMetric 1.3.6.1.4.1.559.1.2.2.3.1.19
The IP routing metric assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portshdlcIpxNetwork 1.3.6.1.4.1.559.1.2.2.3.1.20
The IPX Network Address assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

portshdlcIpxType 1.3.6.1.4.1.559.1.2.2.3.1.21
The frame type used for IPX RIP and SAP messages emanating from this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernetII(1), ieee802dot2(2), novell802dot3(3), snap(4)  

portspppTable 1.3.6.1.4.1.559.1.2.2.4
A table of configured ppp ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpPlusPortsPppEntry

portspppEntry 1.3.6.1.4.1.559.1.2.2.4.1
A list of ppp port configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArpPlusPortsPppEntry  

portspppIndex 1.3.6.1.4.1.559.1.2.2.4.1.1
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portspppName 1.3.6.1.4.1.559.1.2.2.4.1.2
The name of the ppp port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

portspppPriority 1.3.6.1.4.1.559.1.2.2.4.1.3
The spanning tree priority of this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portspppLinespeed 1.3.6.1.4.1.559.1.2.2.4.1.4
The linespeed of this port. This is used to calculate percentage load and Spanning tree costs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portspppIpAddress 1.3.6.1.4.1.559.1.2.2.4.1.5
The IP Address assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portspppIpMask 1.3.6.1.4.1.559.1.2.2.4.1.6
The IP Address Mask assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portspppIpMetric 1.3.6.1.4.1.559.1.2.2.4.1.7
The IP routing metric assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portspppIpxNetwork 1.3.6.1.4.1.559.1.2.2.4.1.8
The IPX Network Address assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

portspppIpxType 1.3.6.1.4.1.559.1.2.2.4.1.9
The frame type used for IPX RIP and SAP messages emanating from this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernetII(1), ieee802dot2(2), novell802dot3(3), snap(4)  

portspppBaud 1.3.6.1.4.1.559.1.2.2.4.1.10
The Baud Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bd1200(1), bd2400(2), bd4800(3), bd9600(4), bd19200(5), bd38400(6)  

portspppDataBits 1.3.6.1.4.1.559.1.2.2.4.1.11
The number of data bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER data-7-bits(7), data-8-bits(8)  

portspppStopBits 1.3.6.1.4.1.559.1.2.2.4.1.12
The number of stop bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER data-1-bits(1), data-2-bits(2)  

portspppFlowControl 1.3.6.1.4.1.559.1.2.2.4.1.13
Flow Control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rts(1), xon(2), halfxon(3), rts-on-tx(4), none(5)  

portspppTxParity 1.3.6.1.4.1.559.1.2.2.4.1.14
Transmit Parity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

portspppRxParity 1.3.6.1.4.1.559.1.2.2.4.1.15
Receive Parity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

portspppRemoteUnit 1.3.6.1.4.1.559.1.2.2.4.1.16
Remote Unit Type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER any(1), r3com(2), cisco(3), ascend(4), spider(5)  

portspppIPRemoteAddress 1.3.6.1.4.1.559.1.2.2.4.1.17
Remote IP Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portstaTable 1.3.6.1.4.1.559.1.2.2.5
A table of configured ta ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortstaEntry

portstaEntry 1.3.6.1.4.1.559.1.2.2.5.1
A list of ta port configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortstaEntry  

portstaIndex 1.3.6.1.4.1.559.1.2.2.5.1.1
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portstaName 1.3.6.1.4.1.559.1.2.2.5.1.2
The name of the ta port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

portstaPriority 1.3.6.1.4.1.559.1.2.2.5.1.3
The spanning tree priority of this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portstaLinespeed 1.3.6.1.4.1.559.1.2.2.5.1.4
The linespeed of this port. This is used to calculate percentage load and Spanning tree costs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portstaCompression 1.3.6.1.4.1.559.1.2.2.5.1.5
If enabled, data is compressed using the Lempel Ziv algorithm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), lzStandard(1), lzWhite(2), stac(3)  

portstaScramble 1.3.6.1.4.1.559.1.2.2.5.1.6
If enabled, data is scrambled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

portstaDemand 1.3.6.1.4.1.559.1.2.2.5.1.7
whether to use enable demand top-up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(2)  

portstaDemandthresh 1.3.6.1.4.1.559.1.2.2.5.1.8
Threshold at which dialup demand is invoked, if Backup/Demand is set to demand or both in fraction of capacity * 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portstaDemandperiod 1.3.6.1.4.1.559.1.2.2.5.1.9
Time over which demand must exceed the demand threshold before call will be established. Measured in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portstaIdlethresh 1.3.6.1.4.1.559.1.2.2.5.1.10
Threshold at which once dialup demand is invoked, it will drop once load drops below fraction of capacity * 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portstaIdleperiod 1.3.6.1.4.1.559.1.2.2.5.1.11
Time over which demand must be less than the idle threshold before call will be dropped. Measured in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portstaDemandpriority 1.3.6.1.4.1.559.1.2.2.5.1.13
Priority of the demand call, since it may be bumped by a higher priority call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

portstaDialtimeout 1.3.6.1.4.1.559.1.2.2.5.1.17
The time in seconds for which bridge will wait for an OK response from the external TA.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

portstaAtzstring 1.3.6.1.4.1.559.1.2.2.5.1.18
Initialization string for the TA.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

portstaSpidstring 1.3.6.1.4.1.559.1.2.2.5.1.19
SPID string for the TA.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

portsslipTable 1.3.6.1.4.1.559.1.2.2.6
A table of configured slip ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpPlusPortsSlipEntry

portsslipEntry 1.3.6.1.4.1.559.1.2.2.6.1
A list of slip port configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArpPlusPortsSlipEntry  

portsslipIndex 1.3.6.1.4.1.559.1.2.2.6.1.1
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portsslipName 1.3.6.1.4.1.559.1.2.2.6.1.2
The name of the slip port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

portsslipPriority 1.3.6.1.4.1.559.1.2.2.6.1.3
The spanning tree priority of this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portsslipLinespeed 1.3.6.1.4.1.559.1.2.2.6.1.4
The linespeed of this port. This is used to calculate percentage load and Spanning tree costs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portsslipIpAddress 1.3.6.1.4.1.559.1.2.2.6.1.5
The IP Address assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portsslipIpMask 1.3.6.1.4.1.559.1.2.2.6.1.6
The IP Address Mask assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portsslipIpMetric 1.3.6.1.4.1.559.1.2.2.6.1.7
The IP routing metric assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portsslipBaud 1.3.6.1.4.1.559.1.2.2.6.1.8
The Baud Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bd1200(1), bd2400(2), bd4800(3), bd9600(4), bd19200(5), bd38400(6)  

portsslipDataBits 1.3.6.1.4.1.559.1.2.2.6.1.9
The number of data bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER data-7-bits(7), data-8-bits(8)  

portsslipStopBits 1.3.6.1.4.1.559.1.2.2.6.1.10
The number of stop bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER data-1-bits(1), data-2-bits(2)  

portsslipFlowControl 1.3.6.1.4.1.559.1.2.2.6.1.11
Flow Control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rts(1), rts-on-tx(4), none(5)  

portsslipTxParity 1.3.6.1.4.1.559.1.2.2.6.1.12
Transmit Parity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

portsslipRxParity 1.3.6.1.4.1.559.1.2.2.6.1.13
Receive Parity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

portsslipMTU 1.3.6.1.4.1.559.1.2.2.6.1.14
Maximum Transmit Unit Length
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portsslipRIPPrivate 1.3.6.1.4.1.559.1.2.2.6.1.15
Advertise IP Route
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

portsslipIPRemoteAddress 1.3.6.1.4.1.559.1.2.2.6.1.16
Remote IP Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

portsasyncTable 1.3.6.1.4.1.559.1.2.2.7
A table of configured asynchronous serial manager ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpPlusPortsAsyncEntry

portsasyncEntry 1.3.6.1.4.1.559.1.2.2.7.1
A list of asynchronous serial manager port configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArpPlusPortsAsyncEntry  

portsasyncIndex 1.3.6.1.4.1.559.1.2.2.7.1.1
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portsasyncName 1.3.6.1.4.1.559.1.2.2.7.1.2
The name of the asynchronous serial manager port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

portsasyncBaud 1.3.6.1.4.1.559.1.2.2.7.1.3
The Baud Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bd1200(1), bd2400(2), bd4800(3), bd9600(4), bd19200(5), bd38400(6)  

portsasyncDataBits 1.3.6.1.4.1.559.1.2.2.7.1.4
The number of data bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER data-7-bits(7), data-8-bits(8)  

portsasyncStopBits 1.3.6.1.4.1.559.1.2.2.7.1.5
The number of stop bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER data-1-bits(1), data-2-bits(2)  

portsasyncFlowControl 1.3.6.1.4.1.559.1.2.2.7.1.6
Flow Control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rtscts(1), xonxoff(2), none(5), both(6)  

portsasyncTxParity 1.3.6.1.4.1.559.1.2.2.7.1.7
Transmit Parity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

portsasyncRxParity 1.3.6.1.4.1.559.1.2.2.7.1.8
Receive Parity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

portsvoiceTable 1.3.6.1.4.1.559.1.2.2.8
A table of configured voice ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortsvoiceEntry

portsvoiceEntry 1.3.6.1.4.1.559.1.2.2.8.1
A list of voice port configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortsvoiceEntry  

portsvoiceIndex 1.3.6.1.4.1.559.1.2.2.8.1.1
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portsvoiceName 1.3.6.1.4.1.559.1.2.2.8.1.2
The name of the voice port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

portsvoiceCallsPermitted 1.3.6.1.4.1.559.1.2.2.8.1.3
Controls whether incoming, outgoing or both types of voice call are permitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inout(0), in(1), out(2)  

portsvoiceEncoding 1.3.6.1.4.1.559.1.2.2.8.1.4
The sound encoding mecanism used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER alaw(0), ulaw(1)  

portsvoiceDialMode 1.3.6.1.4.1.559.1.2.2.8.1.5
Controls whether each digit dialed is sent to the network immediately, or the whole number sent complete.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER overlap(0), enbloc(1)  

portstpadTable 1.3.6.1.4.1.559.1.2.2.9
A table of configured tpad ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortstpadEntry

portstpadEntry 1.3.6.1.4.1.559.1.2.2.9.1
A list of tpad port configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortstpadEntry  

portstpadIndex 1.3.6.1.4.1.559.1.2.2.9.1.1
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portstpadName 1.3.6.1.4.1.559.1.2.2.9.1.2
The name of the tpad port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

portstpadBaud 1.3.6.1.4.1.559.1.2.2.9.1.3
The Baud Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bd1200(1), bd2400(2), bd4800(3), bd9600(4), bd19200(5), bd38400(6), bd57600(7)  

portstpadDataBits 1.3.6.1.4.1.559.1.2.2.9.1.4
The number of data bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER data-7-bits(7), data-8-bits(8)  

portstpadStopBits 1.3.6.1.4.1.559.1.2.2.9.1.5
The number of stop bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER data-1-bits(1), data-2-bits(2)  

portstpadParity 1.3.6.1.4.1.559.1.2.2.9.1.6
Parity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

portstpadTxFlowControl 1.3.6.1.4.1.559.1.2.2.9.1.7
Transmit Flow Control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rtscts(1), xonxoff(2), none(5), both(6)  

portstpadRxFlowControl 1.3.6.1.4.1.559.1.2.2.9.1.8
Receive Flow Control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rtscts(1), xonxoff(2), none(5), both(6)  

portstpadX25MinLCN 1.3.6.1.4.1.559.1.2.2.9.1.9
X25 Minimum LCN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portstpadX25MaxLCN 1.3.6.1.4.1.559.1.2.2.9.1.10
X25 Maximum LCN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mlinkTable 1.3.6.1.4.1.559.1.2.3.1.1
A table of Multi-link links.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MlinkEntry

mlinkEntry 1.3.6.1.4.1.559.1.2.3.1.1.1
A MLINK ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MlinkEntry  

mlinkIndex 1.3.6.1.4.1.559.1.2.3.1.1.1.1
The index of this mlink link 1 to N.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mlinkName 1.3.6.1.4.1.559.1.2.3.1.1.1.2
The name of the Bridge connected to by this link
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..19)  

mlinkNumberOfPorts 1.3.6.1.4.1.559.1.2.3.1.1.1.3
Number of actual ports that make this mlink
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mlinkInFrames 1.3.6.1.4.1.559.1.2.3.1.1.1.4
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mlinkOutFrames 1.3.6.1.4.1.559.1.2.3.1.1.1.5
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mlinkInDiscards 1.3.6.1.4.1.559.1.2.3.1.1.1.6
Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mlinkState 1.3.6.1.4.1.559.1.2.3.1.1.1.7
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

filterTable 1.3.6.1.4.1.559.1.2.3.2.1
A table of filter address pairs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FilterEntry

filterEntry 1.3.6.1.4.1.559.1.2.3.2.1.1
A list of information for each filter pair.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FilterEntry  

filterDest 1.3.6.1.4.1.559.1.2.3.2.1.1.1
The destination Mac Address for the filter pair.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

filterSource 1.3.6.1.4.1.559.1.2.3.2.1.1.2
The source Mac Address for the filter pair.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

filterPrimary 1.3.6.1.4.1.559.1.2.3.2.1.1.3
This is the primary entry of the filter pair.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

filterType 1.3.6.1.4.1.559.1.2.3.2.1.1.4
This is a permanent not a learned entry. Set this to delete to delete the entry and its partner.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER permanent(1), learned(2), invalid(3)  

filterRoute 1.3.6.1.4.1.559.1.2.3.2.1.1.5
The link down which the destination is to be found.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

filterPacketcount 1.3.6.1.4.1.559.1.2.3.2.1.1.6
The number of packets received by this destination from this source; may be reset to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

filterBytecount 1.3.6.1.4.1.559.1.2.3.2.1.1.7
The number of bytes received by this destination from this source; may be reset to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

filtertypeTable 1.3.6.1.4.1.559.1.2.3.2.2
A table filter types.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FilterTypeEntry

filtertypeEntry 1.3.6.1.4.1.559.1.2.3.2.2.1
A list of types to filter on.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FilterTypeEntry  

filtertypeIndex 1.3.6.1.4.1.559.1.2.3.2.2.1.1
The index of the type filter entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

filtertypeClass 1.3.6.1.4.1.559.1.2.3.2.2.1.2
The entry class, or set to delete to remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ieee(0), ethernet(1)  

filtertypeLsap 1.3.6.1.4.1.559.1.2.3.2.2.1.3
For ieee, this is in the range 0..255, For ethernet, in the range 0..65535.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

filtertypeMode 1.3.6.1.4.1.559.1.2.3.2.2.1.4
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER edit(0), delete(1)  

filterAgingtime 1.3.6.1.4.1.559.1.2.3.2.3
For learned entries, this gives the time in seconds after which the learned entries are discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

filterLearning 1.3.6.1.4.1.559.1.2.3.2.4
If disabled, this stops the bridge from learning new entries.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

filterActiononmatch 1.3.6.1.4.1.559.1.2.3.2.5
If packet matches an entry in the filter table, reject or forward the packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reject(0), forward(1)  

filterFiltermcast 1.3.6.1.4.1.559.1.2.3.2.6
If disabled, pass through multicast addresses unfiltered.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

filterTypematching 1.3.6.1.4.1.559.1.2.3.2.7
If enabled, then check whether the Type/Lsap of the packet is in the type table before forwarding.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

filterTypematchaction 1.3.6.1.4.1.559.1.2.3.2.8
If type matching enabled, then reject or forward packets whose Lsap/Type are in the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reject(0), forward(1)  

filterLearnsourceonmcast 1.3.6.1.4.1.559.1.2.3.2.9
If enabled, then learn source location from multicast packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

filterFlushall 1.3.6.1.4.1.559.1.2.3.2.10
If true, then the bridge will retire all learned entries.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

filterLearnnovell 1.3.6.1.4.1.559.1.2.3.2.11
If true, then the bridge will learn Novell server addresses and enter them into the autocall table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

filterLearnbridging 1.3.6.1.4.1.559.1.2.3.2.12
Enables or disables bridging.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

authorisedTable 1.3.6.1.4.1.559.1.2.3.3.1
A table of bridges allowed to join the network.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AuthorisedEntry

authorisedEntry 1.3.6.1.4.1.559.1.2.3.3.1.1
A list of authorised bridges.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AuthorisedEntry  

authorisedIndex 1.3.6.1.4.1.559.1.2.3.3.1.1.1
The MAC address of an authorised bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

authorisedAddress 1.3.6.1.4.1.559.1.2.3.3.1.1.2
The Mac Address of the bridge authorised to use the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

authorisedMode 1.3.6.1.4.1.559.1.2.3.3.1.1.3
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER edit(0), delete(1)  

autocallMacTable 1.3.6.1.4.1.559.1.2.3.4.1.2
A table of telephone numbers which are automatically dialled upon receipt of MAC addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AutocallMacEntry

autocallMacEntry 1.3.6.1.4.1.559.1.2.3.4.1.2.1
A list of calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AutocallMacEntry  

autocallMacIndex 1.3.6.1.4.1.559.1.2.3.4.1.2.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

autocallMacDefault 1.3.6.1.4.1.559.1.2.3.4.1.2.1.2
Default MAC Autocall
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallMacBumpable 1.3.6.1.4.1.559.1.2.3.4.1.2.1.3
Make autocall bumpable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallMacIdle 1.3.6.1.4.1.559.1.2.3.4.1.2.1.4
Number of seconds this call can be idle before call is dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

autocallMacIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.1.2.1.5
Idle is defined by the line being less than a certain activity. Full load is 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

autocallMacAddress 1.3.6.1.4.1.559.1.2.3.4.1.2.1.6
The MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

autocallMacIsdn 1.3.6.1.4.1.559.1.2.3.4.1.2.1.7
The ISDN telephone number to call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

autocallMacMode 1.3.6.1.4.1.559.1.2.3.4.1.2.1.8
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), edit(4)  

autocallIpTable 1.3.6.1.4.1.559.1.2.3.4.1.3
A table of telephone numbers which are automatically dialled upon receipt of IP addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AutocallIpEntry

autocallIpEntry 1.3.6.1.4.1.559.1.2.3.4.1.3.1
A list of calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AutocallIpEntry  

autocallIpIndex 1.3.6.1.4.1.559.1.2.3.4.1.3.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

autocallIpBumpable 1.3.6.1.4.1.559.1.2.3.4.1.3.1.2
Make autocall bumpable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallIpIdle 1.3.6.1.4.1.559.1.2.3.4.1.3.1.3
Number of seconds this call can be idle before call is dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

autocallIpIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.1.3.1.4
Idle is defined by the line being less than a certain activity. Full load is 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

autocallIpAddress 1.3.6.1.4.1.559.1.2.3.4.1.3.1.5
The IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

autocallIpMask 1.3.6.1.4.1.559.1.2.3.4.1.3.1.6
The IP mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

autocallIpInverse 1.3.6.1.4.1.559.1.2.3.4.1.3.1.7
Make inverse autocall
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallIpIsdn 1.3.6.1.4.1.559.1.2.3.4.1.3.1.8
The ISDN telephone number to call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

autocallIpMode 1.3.6.1.4.1.559.1.2.3.4.1.3.1.9
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), edit(4)  

autocallIpxSapTable 1.3.6.1.4.1.559.1.2.3.4.1.4
A table of telephone numbers which are automatically dialled upon receipt of IPX SAP addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AutocallIpxSapEntry

autocallIpxSapEntry 1.3.6.1.4.1.559.1.2.3.4.1.4.1
A list of calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AutocallIpxSapEntry  

autocallIpxSapIndex 1.3.6.1.4.1.559.1.2.3.4.1.4.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

autocallIpxSapServer 1.3.6.1.4.1.559.1.2.3.4.1.4.1.2
The SAP server name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..48)  

autocallIpxSapNetwork 1.3.6.1.4.1.559.1.2.3.4.1.4.1.3
The SAP network number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

autocallIpxSapNode 1.3.6.1.4.1.559.1.2.3.4.1.4.1.4
The SAP node number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

autocallIpxSapSocket 1.3.6.1.4.1.559.1.2.3.4.1.4.1.5
The SAP socket number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

autocallIpxSapService 1.3.6.1.4.1.559.1.2.3.4.1.4.1.6
The SAP service type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

autocallIpxSapHops 1.3.6.1.4.1.559.1.2.3.4.1.4.1.7
Number of hops.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

autocallIpxSapIsdn 1.3.6.1.4.1.559.1.2.3.4.1.4.1.8
The ISDN telephone number to call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

autocallIpxSapFrameType 1.3.6.1.4.1.559.1.2.3.4.1.4.1.9
The frame type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER etherII(1), ieee8022(2), ieee8023(3), snap(4)  

autocallIpxSapDirectNetwork 1.3.6.1.4.1.559.1.2.3.4.1.4.1.10
The Direct network number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

autocallIpxSapRouterMac 1.3.6.1.4.1.559.1.2.3.4.1.4.1.11
The Router Mac.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

autocallIpxSapNearest 1.3.6.1.4.1.559.1.2.3.4.1.4.1.12
In bridging mode, generate nearest server response for this server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallIpxSapPpp 1.3.6.1.4.1.559.1.2.3.4.1.4.1.13
PPP Mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallIpxSapIsdnType 1.3.6.1.4.1.559.1.2.3.4.1.4.1.14
The ISDN type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sync(1), lapb(2)  

autocallIpxSapMode 1.3.6.1.4.1.559.1.2.3.4.1.4.1.15
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), edit(4)  

autocallIpxTable 1.3.6.1.4.1.559.1.2.3.4.1.5
A table of telephone numbers which are automatically dialled upon receipt of IPX addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AutocallIpxEntry

autocallIpxEntry 1.3.6.1.4.1.559.1.2.3.4.1.5.1
A list of calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AutocallIpxEntry  

autocallIpxIndex 1.3.6.1.4.1.559.1.2.3.4.1.5.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

autocallIpxNetwork 1.3.6.1.4.1.559.1.2.3.4.1.5.1.2
The network number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

autocallIpxNode 1.3.6.1.4.1.559.1.2.3.4.1.5.1.3
The node number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

autocallIpxPacketType 1.3.6.1.4.1.559.1.2.3.4.1.5.1.4
Packet Type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

autocallIpxTransportControl 1.3.6.1.4.1.559.1.2.3.4.1.5.1.5
Transport Control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

autocallIpxIsdn 1.3.6.1.4.1.559.1.2.3.4.1.5.1.6
The ISDN telephone number to call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

autocallIpxBumpable 1.3.6.1.4.1.559.1.2.3.4.1.5.1.7
Make autocall bumpable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallIpxIdle 1.3.6.1.4.1.559.1.2.3.4.1.5.1.8
Number of seconds this call can be idle before call is dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

autocallIpxIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.1.5.1.9
Idle is defined by the line being less than a certain activity. Full load is 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

autocallIpxDefault 1.3.6.1.4.1.559.1.2.3.4.1.5.1.10
Default IPX Autocall
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallIpxFrameType 1.3.6.1.4.1.559.1.2.3.4.1.5.1.11
The frame type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER etherII(1), ieee8022(2), ieee8023(3), snap(4)  

autocallIpxPpp 1.3.6.1.4.1.559.1.2.3.4.1.5.1.12
PPP Mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallIpxIsdnType 1.3.6.1.4.1.559.1.2.3.4.1.5.1.13
The ISDN type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sync(1), lapb(2)  

autocallIpxMode 1.3.6.1.4.1.559.1.2.3.4.1.5.1.14
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), edit(4)  

autocallIpxRipTable 1.3.6.1.4.1.559.1.2.3.4.1.6
A table of telephone numbers which are automatically dialled upon receipt of IPX RIP addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AutocallIpxRipEntry

autocallIpxRipEntry 1.3.6.1.4.1.559.1.2.3.4.1.6.1
A list of calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AutocallIpxRipEntry  

autocallIpxRipIndex 1.3.6.1.4.1.559.1.2.3.4.1.6.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

autocallIpxRipNetwork 1.3.6.1.4.1.559.1.2.3.4.1.6.1.2
The network number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

autocallIpxRipHops 1.3.6.1.4.1.559.1.2.3.4.1.6.1.3
Number of Hops.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

autocallIpxRipTicks 1.3.6.1.4.1.559.1.2.3.4.1.6.1.4
Number of Ticks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

autocallIpxRipNode 1.3.6.1.4.1.559.1.2.3.4.1.6.1.5
The node number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

autocallIpxRipIsdn 1.3.6.1.4.1.559.1.2.3.4.1.6.1.6
The ISDN telephone number to call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

autocallIpxRipFrameType 1.3.6.1.4.1.559.1.2.3.4.1.6.1.7
The frame type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER etherII(1), ieee8022(2), ieee8023(3), snap(4)  

autocallIpxRipDirectNetwork 1.3.6.1.4.1.559.1.2.3.4.1.6.1.8
The Direct network number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

autocallIpxRipRouterMac 1.3.6.1.4.1.559.1.2.3.4.1.6.1.9
The Router Mac.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

autocallIpxRipLinkTicks 1.3.6.1.4.1.559.1.2.3.4.1.6.1.10
Number of Link Ticks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

autocallIpxRipPpp 1.3.6.1.4.1.559.1.2.3.4.1.6.1.11
PPP Mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallIpxRipIsdnType 1.3.6.1.4.1.559.1.2.3.4.1.6.1.12
The ISDN type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sync(1), lapb(2)  

autocallIpxRipMode 1.3.6.1.4.1.559.1.2.3.4.1.6.1.13
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), edit(4)  

autocallDialTable 1.3.6.1.4.1.559.1.2.3.4.1.7
A table of telephone numbers which are automatically dialled upon receipt of an ISDN call with a matching CLI response.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AutocallDialEntry

autocallDialEntry 1.3.6.1.4.1.559.1.2.3.4.1.7.1
A list of calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AutocallDialEntry  

autocallDialIndex 1.3.6.1.4.1.559.1.2.3.4.1.7.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

autocallDialCli 1.3.6.1.4.1.559.1.2.3.4.1.7.1.2
The ISDN telephone number to match.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

autocallDialIsdn 1.3.6.1.4.1.559.1.2.3.4.1.7.1.3
The ISDN telephone number to call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

autocallDialBumpable 1.3.6.1.4.1.559.1.2.3.4.1.7.1.4
Make autocall bumpable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autocallDialIdle 1.3.6.1.4.1.559.1.2.3.4.1.7.1.5
Number of seconds this call can be idle before call is dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

autocallDialIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.1.7.1.6
Idle is defined by the line being less than a certain activity. Full load is 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

autocallDialMode 1.3.6.1.4.1.559.1.2.3.4.1.7.1.7
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), edit(4)  

isdnbandsTable 1.3.6.1.4.1.559.1.2.3.4.2.1
A table of isdn timebands and their properties.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnbandsEntry

isdnbandsEntry 1.3.6.1.4.1.559.1.2.3.4.2.1.1
A list of isdn timebands.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnbandsEntry  

isdnbandsIndex 1.3.6.1.4.1.559.1.2.3.4.2.1.1.1
The index of this ISDN band.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnbandsName 1.3.6.1.4.1.559.1.2.3.4.2.1.1.2
The name of this ISDN band.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

isdnbandsStarttime 1.3.6.1.4.1.559.1.2.3.4.2.1.1.3
The start time in seconds since midnight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

isdnbandsEndtime 1.3.6.1.4.1.559.1.2.3.4.2.1.1.4
The end time in seconds since midnight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

isdnbandsDays 1.3.6.1.4.1.559.1.2.3.4.2.1.1.5
Days of the week assigned to this timeband, separated by colons. Use abbreviations : monday - Mo tuesday - Tu wednesday - We thursday - Th friday - Fr saturday - Sa sunday - Su eg saturday and sunday is Sa:Su .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

isdnbandsAllowbackup 1.3.6.1.4.1.559.1.2.3.4.2.1.1.6
Allow isdn calls to be made to back up bridge links during this time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

isdnbandsAllowdemand 1.3.6.1.4.1.559.1.2.3.4.2.1.1.7
Allow isdn calls to be made for demand bandwidth during this time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

isdnbandsAllowautocall 1.3.6.1.4.1.559.1.2.3.4.2.1.1.8
Allow isdn calls to be made for autocalls during this time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

isdnbandsAllowlist 1.3.6.1.4.1.559.1.2.3.4.2.1.1.9
Allow isdn calls to be made to ISDN numbers on the list for this timeband during this time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

isdnbandsMode 1.3.6.1.4.1.559.1.2.3.4.2.1.1.12
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER edit(0), delete(1)  

isdnbandsBridgeListTable 1.3.6.1.4.1.559.1.2.3.4.2.2
A table of isdn timebands and their properties.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnbandsBridgeListEntry

isdnbandsBridgeListEntry 1.3.6.1.4.1.559.1.2.3.4.2.2.1
A list of isdn timebands.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnbandsBridgeListEntry  

isdnbandsBridgeListIndex 1.3.6.1.4.1.559.1.2.3.4.2.2.1.1
The index of this ISDN band.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnbandsBridgeListBandName 1.3.6.1.4.1.559.1.2.3.4.2.2.1.2
The name of this ISDN band.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

isdnbandsBridgeListBridgeName 1.3.6.1.4.1.559.1.2.3.4.2.2.1.3
The name of this ISDN band.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

isdnnumbersTable 1.3.6.1.4.1.559.1.2.3.4.3.1
A table of isdn numbers against names.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpPlusIsdnNumbersEntry

isdnnumbersEntry 1.3.6.1.4.1.559.1.2.3.4.3.1.1
A list of isdn numbers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArpPlusIsdnNumbersEntry  

isdnnumbersIndex 1.3.6.1.4.1.559.1.2.3.4.3.1.1.1
The index of this ISDN number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

isdnnumbersName 1.3.6.1.4.1.559.1.2.3.4.3.1.1.2
The name of this ISDN number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

isdnnumbersNumber1 1.3.6.1.4.1.559.1.2.3.4.3.1.1.3
The ISDN number (1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

isdnnumbersNumber2 1.3.6.1.4.1.559.1.2.3.4.3.1.1.4
The ISDN number (2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

isdnnumbersNumber3 1.3.6.1.4.1.559.1.2.3.4.3.1.1.5
The ISDN number (3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

isdnnumbersNumber4 1.3.6.1.4.1.559.1.2.3.4.3.1.1.6
The ISDN number (4).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..39)  

isdnnumbersCall 1.3.6.1.4.1.559.1.2.3.4.3.1.1.7
If set to request, then call will be immediately made to this destination. Cancel will cancel any calls to this destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), request(1), cancel(2)  

isdnnumbersTesttime 1.3.6.1.4.1.559.1.2.3.4.3.1.1.8
The time at which a test-call will be made (in seconds since midnight).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

isdnnumbersDays 1.3.6.1.4.1.559.1.2.3.4.3.1.1.9
Days of the week on which testcalls will be made, separated by colons. Use abbreviations : monday - Mo tuesday - Tu wednesday - We thursday - Th friday - Fr saturday - Sa sunday - Su eg saturday and sunday is Sa:Su .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

isdnnumbersLasttest 1.3.6.1.4.1.559.1.2.3.4.3.1.1.10
The Day/Month of the last successful testcall.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isdnnumbersIpAddress 1.3.6.1.4.1.559.1.2.3.4.3.1.1.11
The IP Address assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

isdnnumbersIpMask 1.3.6.1.4.1.559.1.2.3.4.3.1.1.12
The IP Address Mask assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

isdnnumbersIpMetric 1.3.6.1.4.1.559.1.2.3.4.3.1.1.13
The IP routing metric assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnnumbersIpxNetwork 1.3.6.1.4.1.559.1.2.3.4.3.1.1.14
The IPX Network Address assigned to this port when routing is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

isdnnumbersIpxType 1.3.6.1.4.1.559.1.2.3.4.3.1.1.15
The frame type used for IPX RIP and SAP messages emanating from this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernetII(1), ieee802dot2(2), novell802dot3(3), snap(4)  

isdnnumbersPpp 1.3.6.1.4.1.559.1.2.3.4.3.1.1.16
Enable/Disable the PPP protocol for this number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

isdnnumbersRemoteIpAddress 1.3.6.1.4.1.559.1.2.3.4.3.1.1.17
The IP Address for the remote unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

isdnnumbersRemoteUnitType 1.3.6.1.4.1.559.1.2.3.4.3.1.1.18
The remote unit type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER any(1), n3com(2), cisco(3), ascend(4), spider(5)  

isdnnumbersHdlcType 1.3.6.1.4.1.559.1.2.3.4.3.1.1.19
The HDLC link type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER synchronous(1), lapb(2)  

isdnnumbersPppAuthentication 1.3.6.1.4.1.559.1.2.3.4.3.1.1.20
The PPP negotiation status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), pap(2), chap(3), both(4)  

isdnnumbersMaxCircuits 1.3.6.1.4.1.559.1.2.3.4.3.1.1.21
The max number of ISDN Circuits (1 or 2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnnumbersMPEnable 1.3.6.1.4.1.559.1.2.3.4.3.1.1.22
PPP Multilink.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), enabled-short(3), enabled-bacp(4), enabled-short-bacp(5)  

isdnnumbersLearntED 1.3.6.1.4.1.559.1.2.3.4.3.1.1.23
Learnt endpoint descriminator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..17)  

isdnnumbersMode 1.3.6.1.4.1.559.1.2.3.4.3.1.1.24
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER edit(0), delete(1)  

isdnnumbersCallType1 1.3.6.1.4.1.559.1.2.3.4.3.1.1.25
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unrestricted(0), restricted(1), v110(2), speech(3)  

isdnnumbersCallType2 1.3.6.1.4.1.559.1.2.3.4.3.1.1.26
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unrestricted(0), restricted(1), v110(2), speech(3)  

isdnnumbersCallType3 1.3.6.1.4.1.559.1.2.3.4.3.1.1.27
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unrestricted(0), restricted(1), v110(2), speech(3)  

isdnnumbersCallType4 1.3.6.1.4.1.559.1.2.3.4.3.1.1.28
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unrestricted(0), restricted(1), v110(2), speech(3)  

isdnportsTable 1.3.6.1.4.1.559.1.2.3.4.4.1
A table of isdn ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnportsEntry

isdnportsEntry 1.3.6.1.4.1.559.1.2.3.4.4.1.1
A table of isdn ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnportsEntry  

isdnportsIndex 1.3.6.1.4.1.559.1.2.3.4.4.1.1.1
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnportsDestination 1.3.6.1.4.1.559.1.2.3.4.4.1.1.2
The destination number that this ISDN number is connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..39)  

isdnportsState 1.3.6.1.4.1.559.1.2.3.4.4.1.1.3
Current state of the port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), calling(1), ringing(2), connected(3), answering(4), answered(5)  

isdnportsConnTime 1.3.6.1.4.1.559.1.2.3.4.4.1.1.4
The connection time (in hundredths of a second).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

isdnportsBackup 1.3.6.1.4.1.559.1.2.3.4.4.1.1.5
If set to true, then the call is a backup call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

isdnportsDemand 1.3.6.1.4.1.559.1.2.3.4.4.1.1.6
If set to true, then the call is a demand call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

isdnportsBumpable 1.3.6.1.4.1.559.1.2.3.4.4.1.1.7
If set to true, then the call is a bumpable call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

isdnportsAlert 1.3.6.1.4.1.559.1.2.3.4.4.1.1.8
current Alert State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), alert(1), beep(2)  

isdnportsPriority 1.3.6.1.4.1.559.1.2.3.4.4.1.1.9
current call priority
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnportsSourceMac 1.3.6.1.4.1.559.1.2.3.4.4.1.1.10
Source Mac of Bridge that requested the call
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

isdnhistoryTable 1.3.6.1.4.1.559.1.2.3.4.5.1
A table of isdn ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnhistoryEntry

isdnhistoryEntry 1.3.6.1.4.1.559.1.2.3.4.5.1.1
A table of isdn ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnhistoryEntry  

isdnhistoryIndex 1.3.6.1.4.1.559.1.2.3.4.5.1.1.1
The index of this ISDN history 1 to N.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnhistoryDestination 1.3.6.1.4.1.559.1.2.3.4.5.1.1.2
The destination ISDN number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..39)  

isdnhistoryTotalTime 1.3.6.1.4.1.559.1.2.3.4.5.1.1.3
Total Time of all calls to this destination (in hundredths of a second)
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

isdnhistoryTotalCalls 1.3.6.1.4.1.559.1.2.3.4.5.1.1.4
The total number of calls to this destination
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnhistoryFailedCalls 1.3.6.1.4.1.559.1.2.3.4.5.1.1.5
The total number of failed calls to this destination
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCliTable 1.3.6.1.4.1.559.1.2.3.4.6.1
A table of ISDN Numbers for bridges allowed to join the network.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnCliEntry

isdnCliEntry 1.3.6.1.4.1.559.1.2.3.4.6.1.1
A list of ISDN Numbers for authorised bridges.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnCliEntry  

isdnCliIndex 1.3.6.1.4.1.559.1.2.3.4.6.1.1.1
The number of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCliNumber 1.3.6.1.4.1.559.1.2.3.4.6.1.1.2
The ISDN number of the bridge authorised to use the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

isdnCliMode 1.3.6.1.4.1.559.1.2.3.4.6.1.1.3
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER edit(0), delete(1)  

isdnlistsTable 1.3.6.1.4.1.559.1.2.3.4.7.1
A table of isdn timeband bridge lists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnlistsEntry

isdnlistsEntry 1.3.6.1.4.1.559.1.2.3.4.7.1.1
A list of isdn bridge lists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnlistsEntry  

isdnlistsIndex 1.3.6.1.4.1.559.1.2.3.4.7.1.1.1
The index of this bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnlistsBand 1.3.6.1.4.1.559.1.2.3.4.7.1.1.2
The timeband for this list. Set null-length string here to delete an entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

isdnlistsName 1.3.6.1.4.1.559.1.2.3.4.7.1.1.3
The name of this bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

isdnParamsNetworkType 1.3.6.1.4.1.559.1.2.3.4.8.1
ISDN Network Type. The device must be rebooted for a change of of this object to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER etsi(1), nationalIsdn1(2), att5essCustom(3), germany1tr6(4), australia(5), italy(6), germanyD64S(7), usa-dms100(8), japan-ins64(9)  

isdnParamsSpid1 1.3.6.1.4.1.559.1.2.3.4.8.2
Service Profile ID 1 (USA Network Types only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsSpid2 1.3.6.1.4.1.559.1.2.3.4.8.3
Service Profile ID 2 (USA Network Types only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsSpid3 1.3.6.1.4.1.559.1.2.3.4.8.4
Service Profile ID 1 (2nd TA - USA Network Types only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsSpid4 1.3.6.1.4.1.559.1.2.3.4.8.5
Service Profile ID 2 (2nd TA - USA Network Types only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsDirectoryNumber1 1.3.6.1.4.1.559.1.2.3.4.8.6
Directory Number 1 (USA Network Types only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsDirectoryNumber2 1.3.6.1.4.1.559.1.2.3.4.8.7
Directory Number 2 (USA Network Types only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsDirectoryNumber3 1.3.6.1.4.1.559.1.2.3.4.8.8
Directory Number 3 (2nd TA for USA Network Types only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsDirectoryNumber4 1.3.6.1.4.1.559.1.2.3.4.8.9
Directory Number 4 (2nd TA for USA Network Types only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsReportBusy 1.3.6.1.4.1.559.1.2.3.4.8.10
Send a positibe Busy reponse to an incoming call if no free port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

isdnParamsIncomingDov 1.3.6.1.4.1.559.1.2.3.4.8.11
Should an incoming voice call be answerred as a data call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), answer(2)  

isdnParamsMaxCallTime 1.3.6.1.4.1.559.1.2.3.4.8.12
Maximum Call time in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnParamsMsn 1.3.6.1.4.1.559.1.2.3.4.8.13
OBJECT IDENTIFIER    

isdnParamsMsnLan 1.3.6.1.4.1.559.1.2.3.4.8.13.1
Multiple Subscriber Number for LAN access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsMsnVoice 1.3.6.1.4.1.559.1.2.3.4.8.13.2
Multiple Subscriber Number for Voice access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsMsnCheck 1.3.6.1.4.1.559.1.2.3.4.8.13.3
Should the incoming MSN be checked before answerring an incoming call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

isdnParamsMsnSend 1.3.6.1.4.1.559.1.2.3.4.8.13.4
Should the MSN be sent in outgoing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

isdnParamsSubAddr 1.3.6.1.4.1.559.1.2.3.4.8.14
OBJECT IDENTIFIER    

isdnParamsSubAddrLan 1.3.6.1.4.1.559.1.2.3.4.8.14.1
Sub Address for LAN access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsSubAddrVoice 1.3.6.1.4.1.559.1.2.3.4.8.14.2
Sub Address for Voice access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

isdnParamsSubAddrCheck 1.3.6.1.4.1.559.1.2.3.4.8.14.3
Should the incoming Sub Address be checked before answerring an incoming call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

isdnParamsSubAddrSend 1.3.6.1.4.1.559.1.2.3.4.8.14.4
Should the Sub Address be sent in outgoing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

isdnParamsSubAddrType 1.3.6.1.4.1.559.1.2.3.4.8.14.5
What format should outgoing an Sub Address take.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nsap(1), user(2)  

isdnParamsTokenValue 1.3.6.1.4.1.559.1.2.3.4.8.15
ISDN time token value. When tokens are refilled, the isdnParamsTokenRemain variable is set to this value NOTE: -1 = disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnParamsTokenRefill 1.3.6.1.4.1.559.1.2.3.4.8.16
ISDN token Refill Mechanism type - 'disabled' No token mechanism. - 'manual' left for user to refill tokens manually. - 'auto' reset the tokens every day at 23:59.59 - 'refill' refills the tokens. NOTE: In order to set 'manuall and 'auto', isdnParamsTokenRemain must not be -1 (disabled)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), manual(1), auto(2), refill(3)  

isdnParamsTokenRemain 1.3.6.1.4.1.559.1.2.3.4.8.17
Displays the remaining number of ISDN tokens left for ISDN usage. NOTE: -1 = disabled
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bootpActive 1.3.6.1.4.1.559.1.2.3.4.9.1
TRUE if BOOTP/DHCP broadcasts are to be bridged (when box is in bridge mode). TRUE if BOOTP/DHCP relay agent is to be active (when box is in router mode). If set, then DHCP Proxy and DHCP Server will be silent disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

bootpBumpable 1.3.6.1.4.1.559.1.2.3.4.9.2
(Bridge mode only) If we receive an autocall to another destination and no free channels, bump this call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

bootpIdle 1.3.6.1.4.1.559.1.2.3.4.9.3
(Bridge mode only) Number of seconds this call can be idle before call is dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bootpIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.9.4
(Bridge mode only) Idle is defined by the line being less than a certain activity. Full load is 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

bootpIsdnName 1.3.6.1.4.1.559.1.2.3.4.9.5
(Bridge mode only) The name of the ISDN telephone number entry to be called.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

bootpAddress 1.3.6.1.4.1.559.1.2.3.4.9.6
(Router mode only) The IP Address of the BOOTP/DHCP server. Format: xxx.xxx.xxx.xxx .
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

bootpDelaySecs 1.3.6.1.4.1.559.1.2.3.4.9.7
(Bridge mode or Router Mode) The age in seconds of a BOOTP/DHCP message after which the bridge or relay starts doing anything. Zero means no delay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..30000  

dhcpProxyActive 1.3.6.1.4.1.559.1.2.3.4.9.8
TRUE if the DHCP proxy is enabled. If set, then DHCP Relay and DHCP Server will be silent disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

referenceAddress 1.3.6.1.4.1.559.1.2.3.4.9.9
(Router mode only) The refernece IP Address (giaddr) for the pool. Format: xxx.xxx.xxx.xxx .
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

minPoolSize 1.3.6.1.4.1.559.1.2.3.4.9.10
The minimum number of addresses in the pool.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnFailDestination 1.3.6.1.4.1.559.1.2.4.2.1
Containins the ISDN destination dialled to cause the call to fail
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

q931FailCauseCode 1.3.6.1.4.1.559.1.2.4.2.2
Contains the cause of a failed Q931 ISDN call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unallocatedNumber(1), normalCallClearing(16), userBusy(17), noUserResponding(18), noAnswerFromUser(19), callRejected(21), numberChanged(22), destinationOutOfOrder(27), networkOutOfOrder(38), temporaryFailure(41), switchingEquipmentCongestion(42), callIdentityInUse(84), requestedCallIdentityCleared(86), incompatibleDestination(88), dlFailureLineBroken(145)  

dass2FailCauseCode 1.3.6.1.4.1.559.1.2.4.2.3
Contains the cause of a failed DASS2 ISDN call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER numberUnobtainable0(0), numberIncomplete(1), cleared2(2), numberUnobtainable3(3), numberUnobtainable4(4), userHasChangedNumber(5), networkBusy(7), numberBusy(8), lineOutOfService(9), numberUnobtainable10(10), accessBarred(11), numberUnobtainable30(30), noReply(31), serviceTermination(32), terminalUnavailable45(45), terminalUnavailable46(46), cleared48(48)  

briFailCauseCode 1.3.6.1.4.1.559.1.2.4.2.4
Contains the cause of a failed DASS2 ISDN call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

radiusReplyCode 1.3.6.1.4.1.559.1.2.4.3.1
Contains the result of a call to RADIUS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER radauthreject(0), radauthnoresponse(1), radauthreadonly(2), radauthreadwrite(3)  

radiusUsername 1.3.6.1.4.1.559.1.2.4.3.2
This is the username authenticated by RADIUS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

loginCode 1.3.6.1.4.1.559.1.2.4.4.1
Contains the result of a login after no RADIUS server can be found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER authreject(0), authok(1)  

cscmEventNumber 1.3.6.1.4.1.559.3.1
Contains the CSCM event number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER linkUp(1), linkDown(2), isdnConnection(3), isdnDisconnection(4), pollFailure(100), pollSuccess(101), dailyThresholdExceeded(102), hourlyThresholdExceeded(103), maxCallLengthExceeded(104), testPollFailure(105), q931failure1000(1000), q931unallocatedNumber(1001), q931normalCallClearing(1016), q931userBusy(1017), q931noUserResponding(1018), q931noAnswerFromUser(1019), q931callRejected(1021), q931numberChanged(1022), q931destinationOutOfOrder(1027), q931networkOutOfOrder(1038), q931temporaryFailure(1041), q931switchingEquipmentCongestion(1042), q931callIdentityInUse(1084), q931requestedCallIdentityCleared(1086), q931incompatibleDestination(1088), q931dlFailureLineBroken(1145), dass2numberUnobtainable0(1200), dass2numberIncomplete(1201), dass2cleared2(1202), dass2numberUnobtainable3(1203), dass2numberUnobtainable4(1204), dass2userHasChangedNumber(1205), dass2networkBusy(1207), dass2numberBusy(1208), dass2lineOutOfService(1209), dass2numberUnobtainable10(1210), dass2accessBarred(1211), dass2numberUnobtainable30(1230), dass2noReply(1231), dass2serviceTermination(1232), dass2terminalUnavailable45(1245), dass2terminalUnavailable46(1246), dass2cleared48(1248)  

cscmOriginatingIP 1.3.6.1.4.1.559.3.2
This is the IP address of the unit that caused the trap to be generated by CSCM
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cscmTrapDetail 1.3.6.1.4.1.559.3.3
This is the IP address of the unit that caused the trap to be generated by CSCM
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alarmCode 1.3.6.1.4.1.559.1.2.4.1.1
Error code for reported Alarm trap event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER failed(1)  

alarmText 1.3.6.1.4.1.559.1.2.4.1.2
Explanatory text describing the event which caused the Alarm trap to be generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ipInRipRequests 1.3.6.1.4.1.559.1.2.1.25.1.1
The number of IP RIP datagram requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipInRipResponses 1.3.6.1.4.1.559.1.2.1.25.1.2
The number of IP RIP datagram responses received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipInRipErrors 1.3.6.1.4.1.559.1.2.1.25.1.3
The number of IP RIP datagrams discarded due to some error other than insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipInRipDiscards 1.3.6.1.4.1.559.1.2.1.25.1.4
The number of IP RIP datagrams discarded due to insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipOutRipRequests 1.3.6.1.4.1.559.1.2.1.25.1.5
The number of IP RIP datagram requests transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipOutRipResponses 1.3.6.1.4.1.559.1.2.1.25.1.6
The number of IP RIP datagram responses transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipOutRipUpdates 1.3.6.1.4.1.559.1.2.1.25.1.7
The number of IP RIP datagrams transmitted due to the detection of a network configuration change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipOutRipErrors 1.3.6.1.4.1.559.1.2.1.25.1.8
The number of IP RIP datagrams discarded due to some error other than insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipOutRipDiscards 1.3.6.1.4.1.559.1.2.1.25.1.9
The number of IP RIP datagrams discarded due to insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipRoutingProtocol 1.3.6.1.4.1.559.1.2.1.25.1.10
The IP routing protocol used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rip(1), rip2(2), ripFixedMask(8), ripExtended(9)  

ipRipLearning 1.3.6.1.4.1.559.1.2.1.25.1.11
When enabled the RIP Table will be updated. This is only applicable to dial-up links.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipRoutingAdvertise 1.3.6.1.4.1.559.1.2.1.25.1.12
The interface that all rips are transmitted on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), all(2), lan(3)  

ipRouteTableCopy 1.3.6.1.4.1.559.1.2.1.25.2
This entity's IP Routing table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRouteEntryCopy

ipRouteEntryCopy 1.3.6.1.4.1.559.1.2.1.25.2.1
A route to a particular destination.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpRouteEntryCopy  

ipRouteDestCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.1
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered an unnumbered route. Unnumbered routes are differentiated by their Destination Route Name entries. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipRouteIfIndexCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.2
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipRouteMetric1Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.3
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipRouteMetric2Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.4
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipRouteMetric3Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.5
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipRouteMetric4Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.6
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipRouteNextHopCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.7
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipRouteTypeCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.8
The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), direct(3), indirect(4)  

ipRouteProtoCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.9
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14)  

ipRouteAgeCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.10
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipRouteMaskCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.11
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipRouteMetric5Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.12
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipRouteInfoCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.13
A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ipRouteNextHopName 1.3.6.1.4.1.559.1.2.1.25.2.1.14
A unique name for the next hop for an unnumbered route. If the IP address of the next hop is 0.0.0.0 it is taken to be the default route if this string is NULL, or an unnumbered link to the named interface if not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ipRouteAdvertise 1.3.6.1.4.1.559.1.2.1.25.2.1.15
Whether or not this route should be advertised
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

ipxInReceives 1.3.6.1.4.1.559.1.2.1.26.1
The number of IPX datagrams received on all interfaces including those received in error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInDelivers 1.3.6.1.4.1.559.1.2.1.26.2
The number of IPX datagrams delivered to this management entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInDiscards 1.3.6.1.4.1.559.1.2.1.26.3
The number of IPX datagrams discarded due to insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInUnknownProtocols 1.3.6.1.4.1.559.1.2.1.26.4
The number of IPX datagrams discardrd due to unknown or unsupported protocols.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInHeaderErrors 1.3.6.1.4.1.559.1.2.1.26.5
The number of IPX datagrams recieved and discarded due to errors detected in the IPX header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxForwardDatagrams 1.3.6.1.4.1.559.1.2.1.26.6
The number of received IPX datagrams not addressed to the IPX Router, which the router will attempt to forward.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutRequests 1.3.6.1.4.1.559.1.2.1.26.7
The number of datagrams supplied to IPX by local user protocols.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutNoRoutes 1.3.6.1.4.1.559.1.2.1.26.8
The number of datagrams discarded because no route could be found to transmit them to their destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutDiscards 1.3.6.1.4.1.559.1.2.1.26.9
The number of IPX datagrams discarded because no resource could be found to allow transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxForwarding 1.3.6.1.4.1.559.1.2.1.26.10
The indication as to whether this entity is acting as a Router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-forwarding(1), forwarding(2)  

ipxInRipRequests 1.3.6.1.4.1.559.1.2.1.26.11.1
The number of IPX RIP datagram requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInRipResponses 1.3.6.1.4.1.559.1.2.1.26.11.2
The number of IPX RIP datagram responses received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInRipErrors 1.3.6.1.4.1.559.1.2.1.26.11.3
The number of IPX RIP datagrams discarded due to some error other than insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInRipTimeouts 1.3.6.1.4.1.559.1.2.1.26.11.4
The number of times IPX RIP datagrams have been expected but have not been received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInRipDiscards 1.3.6.1.4.1.559.1.2.1.26.11.5
The number of IPX RIP datagrams discarded due to insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutRipRequests 1.3.6.1.4.1.559.1.2.1.26.11.6
The number of IPX RIP datagram requests transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutRipResponses 1.3.6.1.4.1.559.1.2.1.26.11.7
The number of IPX RIP datagram responses transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutRipUpdates 1.3.6.1.4.1.559.1.2.1.26.11.8
The number of IPX RIP datagrams transmitted due to the detection of a network configuration change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutRipErrors 1.3.6.1.4.1.559.1.2.1.26.11.9
The number of IPX RIP datagrams discarded due to some error other than insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutRipDiscards 1.3.6.1.4.1.559.1.2.1.26.11.10
The number of IPX RIP datagrams discarded due to insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxRoutingTable 1.3.6.1.4.1.559.1.2.1.26.12.1
The IPX Routing Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpxRoutingTableEntry

ipxRoutingTableEntry 1.3.6.1.4.1.559.1.2.1.26.12.1.1
Information about a routing table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpxRoutingTableEntry  

ipxRouteTarget 1.3.6.1.4.1.559.1.2.1.26.12.1.1.1
The IPX network number of the destination network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

ipxRouteHopCount 1.3.6.1.4.1.559.1.2.1.26.12.1.1.2
The number of hops necessary to reach the destination network. This count includes the additional count required to reach the destination network through this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxRouteTicks 1.3.6.1.4.1.559.1.2.1.26.12.1.1.3
The delay in ticks to reach the destination network. This count includes the additional count required to reach the destination network through this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxRouteNextHopNetwork 1.3.6.1.4.1.559.1.2.1.26.12.1.1.4
The IPX Network Address of the next route on the path to the target network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

ipxRouteNextHopNode 1.3.6.1.4.1.559.1.2.1.26.12.1.1.5
The IPX Node Address of the next router on the path to the target network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

ipxRouteType 1.3.6.1.4.1.559.1.2.1.26.12.1.1.6
Identifies the source of the learnt entry: remote - from the WAN. local - from the LAN. alternate - identifies an entry specifying an alternate, but less desireable route to a known destintion. equal - identifies an entry specifying an alternative route to a known destination. autocall - from the ISDN Autocall table. permanent - identifies a permanent entry. The only valid set request is to make a route permanent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remote(1), local(2), alternate(3), equal(4), autocall(5), permanent(6)  

ipxRoutePort 1.3.6.1.4.1.559.1.2.1.26.12.1.1.7
The name of the logical port through which IPX datagrams will be forwarded towards the destination network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ipxRouteLinkType 1.3.6.1.4.1.559.1.2.1.26.12.1.1.8
The link protocol of the logical port through which IPX datagrams will be forwarded towards the destination network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ppp(1), hdlc(2)  

ipxRouteIpxType 1.3.6.1.4.1.559.1.2.1.26.12.1.1.9
The frame type for IPX RIP messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernetII(1), ieee802dot2(2), novell802dot3(3), snap(4)  

ipxRouteLinkTicks 1.3.6.1.4.1.559.1.2.1.26.12.1.1.10
The additional count required to reach the destination network through this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  


ipxRouteMode 1.3.6.1.4.1.559.1.2.1.26.12.1.1.12
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1)  

ipxInSapRequests 1.3.6.1.4.1.559.1.2.1.26.13.1
The number of IPX SAP datagram updates received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInSapResponses 1.3.6.1.4.1.559.1.2.1.26.13.2
The number of IPX SAP datagram queries received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInSapNoServers 1.3.6.1.4.1.559.1.2.1.26.13.3
The number of IPX datagrams received indicating that no Servers are available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInSapErrors 1.3.6.1.4.1.559.1.2.1.26.13.4
The number of IPX SAP datagrams discarded due to some error other than insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxInSapDiscards 1.3.6.1.4.1.559.1.2.1.26.13.5
The number of IPX SAP datagrams discarded due to insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutSapRequests 1.3.6.1.4.1.559.1.2.1.26.13.6
The number of IPX SAP datagram updates transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutSapResponses 1.3.6.1.4.1.559.1.2.1.26.13.7
The number of IPX SAP datagram replies transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutSapErrors 1.3.6.1.4.1.559.1.2.1.26.13.8
The number of IPX SAP datagrams discarded due to some error other than insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxOutSapDiscards 1.3.6.1.4.1.559.1.2.1.26.13.9
The number of IPX SAP datagrams discarded due to insufficient resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxServicesTable 1.3.6.1.4.1.559.1.2.1.26.14.1
The IPX Services Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpxServicesTableEntry

ipxServicesTableEntry 1.3.6.1.4.1.559.1.2.1.26.14.1.1
Information about a services table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpxServicesTableEntry  

ipxServiceNetwork 1.3.6.1.4.1.559.1.2.1.26.14.1.1.1
The IPX network number portion of the IPX Address of this server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

ipxServiceNode 1.3.6.1.4.1.559.1.2.1.26.14.1.1.2
The IPX node number portion of the IPX Address of this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

ipxServiceSocket 1.3.6.1.4.1.559.1.2.1.26.14.1.1.3
The IPX socket through which this server is advertising.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipxServiceName 1.3.6.1.4.1.559.1.2.1.26.14.1.1.4
The name of this server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ipxServiceType 1.3.6.1.4.1.559.1.2.1.26.14.1.1.5
The type of service offered by this server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxServiceHopCount 1.3.6.1.4.1.559.1.2.1.26.14.1.1.6
The number of hops necessary to reach this server. This count will include the additional count required to reach the server through this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxServicePort 1.3.6.1.4.1.559.1.2.1.26.14.1.1.7
The name of the logical port through which the server is reachable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ipxServiceNextHopNetwork 1.3.6.1.4.1.559.1.2.1.26.14.1.1.8
The IPX Network Address of the next route on the path to the target network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

ipxServiceNextHopNode 1.3.6.1.4.1.559.1.2.1.26.14.1.1.9
The IPX Node Address of the next router on the path to the target network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

ipxServiceIpxType 1.3.6.1.4.1.559.1.2.1.26.14.1.1.10
The frame type for IPX SAP messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernetII(1), ieee802dot2(2), novell802dot3(3), snap(4)  

ipxServiceRTType 1.3.6.1.4.1.559.1.2.1.26.14.1.1.11
Identifies the source of the learnt entry: remote - from the WAN. local - from the LAN. alternate - identifies an entry specifying an alternate, but less desireable route to a known destintion. equal - identifies an entry specifying an alternative route to a known destination. autocall - from the ISDN Autocall table. permanent - identifies a permanent entry. The only valid set request is to make an entry permanent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remote(1), local(2), alternate(3), equal(4), autocall(5), permanent(6)  

ipxServiceLinkType 1.3.6.1.4.1.559.1.2.1.26.14.1.1.12
The link protocol of the logical port through which IPX datagrams will be forwarded towards the destination network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ppp(1), hdlc(2)  


ipxServiceMode 1.3.6.1.4.1.559.1.2.1.26.14.1.1.14
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1)  

ipxNearest 1.3.6.1.4.1.559.1.2.1.26.15.1
The indication as to whether the Nearest Servers list is inclusive or exclusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inclusive(1), exclusive(2)  

ipxNearestTable 1.3.6.1.4.1.559.1.2.1.26.15.2
The IPX Nearest Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpxNearestTableEntry

ipxNearestTableEntry 1.3.6.1.4.1.559.1.2.1.26.15.2.1
Information about a services table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpxNearestTableEntry  

ipxNearestIndex 1.3.6.1.4.1.559.1.2.1.26.15.2.1.1
The index of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxNearestServer 1.3.6.1.4.1.559.1.2.1.26.15.2.1.2
The IPX servers in the IPX Nearest table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ipxNearestMode 1.3.6.1.4.1.559.1.2.1.26.15.2.1.3
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1)  

pppExtLcpConfigTable 1.3.6.1.4.1.559.1.2.1.27.1
The PPP Extended LCP Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppExtLcpConfigTableEntry

pppExtLcpConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.1.1
Information about a LCP extension table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppExtLcpConfigTableEntry  

pppExtLcpLocalProtocolCompression 1.3.6.1.4.1.559.1.2.1.27.1.1.1
LCP Protocol Compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppExtLcpLocalAddressCompression 1.3.6.1.4.1.559.1.2.1.27.1.1.2
LCP Address Compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppExtLcpRemoteMRU 1.3.6.1.4.1.559.1.2.1.27.1.1.3
LCP Remote MRU
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpRemoteProtocolCompression 1.3.6.1.4.1.559.1.2.1.27.1.1.4
LCP Protocol Compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppExtLcpRemoteAddressCompression 1.3.6.1.4.1.559.1.2.1.27.1.1.5
LCP Address Compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppExtLcpMinimumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.1.1.6
Minimum Restart Period
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpMaximumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.1.1.7
Maximum Restart Period
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpMaximumTerminateRequests 1.3.6.1.4.1.559.1.2.1.27.1.1.8
Maximum Terminate Requests
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpMaximumConfigRequests 1.3.6.1.4.1.559.1.2.1.27.1.1.9
Maximum Configure Requests
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpMaximumConfigNaks 1.3.6.1.4.1.559.1.2.1.27.1.1.10
Maximum Configure Naks
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpLocalMRU 1.3.6.1.4.1.559.1.2.1.27.1.1.11
LCP Local MRU
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpLocalMagic 1.3.6.1.4.1.559.1.2.1.27.1.1.12
LCP Local Magic Number
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppExtLcpRemoteMagic 1.3.6.1.4.1.559.1.2.1.27.1.1.13
LCP Remote Magic Number
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppExtLcpLocalMRUEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.14
LCP Local MRU Enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppExtLcpRemoteMRUEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.15
LCP Remote MRU Enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppExtLcpLocalACCM 1.3.6.1.4.1.559.1.2.1.27.1.1.16
LCP Local Accm
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpRemoteACCM 1.3.6.1.4.1.559.1.2.1.27.1.1.17
LCP Remote Accm
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpLocalACCMEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.18
LCP Local Accm Enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpRemoteACCMEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.19
LCP Remote Accm Enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpLocalPAPEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.20
LCP Local PAP Enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), incoming(3)  

pppExtLcpRemotePAPEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.21
LCP Remote PAP Enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppExtLcpLocalCHAPEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.22
LCP Local CHAP Enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppExtLcpRemoteCHAPEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.23
LCP Remote CHAP Enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppEchoConfigTable 1.3.6.1.4.1.559.1.2.1.27.2
The PPP LCP Echo Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppEchoConfigTableEntry

pppEchoConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.2.1
Information about a LCP Echo table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppEchoConfigTableEntry  

pppEchoPeriod 1.3.6.1.4.1.559.1.2.1.27.2.1.1
LCP Echo Period
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppEchoMaxNumberRetransmits 1.3.6.1.4.1.559.1.2.1.27.2.1.2
Maximum number LCP Echos sent with reply before link is closed. Zero disables echos.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pppIpcpConfigTable 1.3.6.1.4.1.559.1.2.1.27.3
The PPP IPCP Config Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppIpcpConfigTableEntry

pppIpcpConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.3.1
Information about a IPCP table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppIpcpConfigTableEntry  

ipcpLocalIPAddressNegotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.1
IPCP Local IP Address Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

ipcpRemoteIPAddressNegotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.2
IPCP Remote IP Address Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

ipcpRemoteCompressionNegotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.3
IPCP Remote Compression Protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), van-jacobson(2), default(3)  

ipcpMinimumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.3.1.4
Minimum Restart Period
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipcpMaximumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.3.1.5
Maximum Restart Period
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipcpMaximumTerminateRequests 1.3.6.1.4.1.559.1.2.1.27.3.1.6
Maximum Terminate Requests
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipcpMaximumConfigRequests 1.3.6.1.4.1.559.1.2.1.27.3.1.7
Maximum Configure Requests
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipcpMaximumConfigNaks 1.3.6.1.4.1.559.1.2.1.27.3.1.8
Maximum Configure Naks
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipcpLocalCompressionNegotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.9
IPCP Local Compression Protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), van-jacobson(2), default(3)  

ipcpRfc1172Negotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.10
IPCP RFC1172 Negotiation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

pppIpxcpConfigTable 1.3.6.1.4.1.559.1.2.1.27.4
The PPP IPXCP Config Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppIpxcpConfigTableEntry

pppIpxcpConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.4.1
Information about a IPXCP table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppIpxcpConfigTableEntry  

ipxcpLocalNetworkNumberNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.1
IPXCP Local Network Number Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

ipxcpLocalNodeNumberNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.2
IPXCP Local Node Number Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

ipxcpLocalRoutingProtocolNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.3
IPXCP Local Routing Protocol Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), rip-sap(2), any(3), default(4)  

ipxcpLocalRouterNameNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.4
IPXCP Local Router Name Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

ipxcpRemoteNetworkNumberNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.5
IPXCP Remote Network Number Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

ipxcpRemoteNodeNumberNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.6
IPXCP Remote Node Number Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

ipxcpRemoteRoutingProtocolNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.7
IPXCP Remote Routing Protocol Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), rip-sap(2), any(3), default(4)  

ipxcpRemoteRouterNameNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.8
IPXCP Remote Router Name Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

ipxcpConfigCompleteNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.9
IPXCP Configure Complete Negotiation Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

ipxcpAdmin 1.3.6.1.4.1.559.1.2.1.27.4.1.10
IPXCP Admin Status. Inject OPEN or CLOSE event into the IPXCP state machine.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER opened(1), closed(2)  

ipxcpMinimumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.4.1.11
Minimum Restart Period
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxcpMaximumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.4.1.12
Maximum Restart Period
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxcpMaximumTerminateRequests 1.3.6.1.4.1.559.1.2.1.27.4.1.13
Maximum Terminate Requests
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxcpMaximumConfigRequests 1.3.6.1.4.1.559.1.2.1.27.4.1.14
Maximum Configure Requests
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxcpMaximumConfigNaks 1.3.6.1.4.1.559.1.2.1.27.4.1.15
Maximum Configure Naks
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipxcpNodeNumber 1.3.6.1.4.1.559.1.2.1.27.4.1.16
The MAC address of the local node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

pppExtConfigTable 1.3.6.1.4.1.559.1.2.1.27.5
The PPP Ext Config Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppExtConfigTableEntry

pppExtConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.5.1
Information about a PPP Ext table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppExtConfigTableEntry  

pppExtLinkAuthentication 1.3.6.1.4.1.559.1.2.1.27.5.1.1
Link Authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppExtEnableIp 1.3.6.1.4.1.559.1.2.1.27.5.1.2
Pass IP frames over the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppExtEnableIpx 1.3.6.1.4.1.559.1.2.1.27.5.1.3
Pass IPX frames over the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppExtHdlcLayer 1.3.6.1.4.1.559.1.2.1.27.5.1.4
The HDLC link type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER synchronous(1), lapb(2)  

ipFirewallStatusTable 1.3.6.1.4.1.559.1.2.1.28.1
The IP Firewall Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFirewallStatusTableEntry

ipFirewallStatusTableEntry 1.3.6.1.4.1.559.1.2.1.28.1.1
Information about an IP firewall status table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFirewallStatusTableEntry  

ipFirewallStatusIndex 1.3.6.1.4.1.559.1.2.1.28.1.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

ipFirewallFilteredPackets 1.3.6.1.4.1.559.1.2.1.28.1.1.2
The number of packets matching this entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipFirewallConfigTable 1.3.6.1.4.1.559.1.2.1.28.2
The IP Firewall Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFirewallConfigTableEntry

ipFirewallConfigTableEntry 1.3.6.1.4.1.559.1.2.1.28.2.1
Information about an IP firewall table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFirewallConfigTableEntry  

ipFirewallConfigIndex 1.3.6.1.4.1.559.1.2.1.28.2.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

ipFirewallSourceAddress 1.3.6.1.4.1.559.1.2.1.28.2.1.2
The IP Firewall Source Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipFirewallSourceMask 1.3.6.1.4.1.559.1.2.1.28.2.1.3
The IP Firewall Source Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipFirewallLowerSourcePort 1.3.6.1.4.1.559.1.2.1.28.2.1.4
The Source port or the lower number of a range of source ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipFirewallHigherSourcePort 1.3.6.1.4.1.559.1.2.1.28.2.1.5
The upper number of a range of source ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipFirewallDestinationAddress 1.3.6.1.4.1.559.1.2.1.28.2.1.6
The IP Firewall Destination Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipFirewallDestinationMask 1.3.6.1.4.1.559.1.2.1.28.2.1.7
The IP Firewall Destination Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipFirewallLowerDestinationPort 1.3.6.1.4.1.559.1.2.1.28.2.1.8
The Destination port or the lower number of a range of destination ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipFirewallHigherDestinationPort 1.3.6.1.4.1.559.1.2.1.28.2.1.9
The upper number of a range of destination ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipFirewallRouterName 1.3.6.1.4.1.559.1.2.1.28.2.1.10
The Router name to which frames are forwarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ipFirewallMode 1.3.6.1.4.1.559.1.2.1.28.2.1.11
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), insert(2), append(3), edit(4)  

ipFirewallType 1.3.6.1.4.1.559.1.2.1.28.2.1.12
The type of filtering required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), all(2), tcp(3), udp(4), icmp(5)  

ipFirewallAction 1.3.6.1.4.1.559.1.2.1.28.2.1.13
Accept or Deny the frame
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), deny(2)  

ipFirewallBidir 1.3.6.1.4.1.559.1.2.1.28.2.1.14
Apply to bidirectional traffic
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipFirewallTcpsyn 1.3.6.1.4.1.559.1.2.1.28.2.1.15
Enable TCP SYN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipxFirewallStatusTable 1.3.6.1.4.1.559.1.2.1.28.3
The IPX Firewall Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpxFirewallStatusTableEntry

ipxFirewallStatusTableEntry 1.3.6.1.4.1.559.1.2.1.28.3.1
Information about an IPX firewall status table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpxFirewallStatusTableEntry  

ipxFirewallStatusIndex 1.3.6.1.4.1.559.1.2.1.28.3.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

ipxFirewallFilteredPackets 1.3.6.1.4.1.559.1.2.1.28.3.1.2
The number of packets matching this entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipxFirewallConfigTable 1.3.6.1.4.1.559.1.2.1.28.4
The IPX Firewall Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpxFirewallConfigTableEntry

ipxFirewallConfigTableEntry 1.3.6.1.4.1.559.1.2.1.28.4.1
Information about an IPX firewall table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpxFirewallConfigTableEntry  

ipxFirewallConfigIndex 1.3.6.1.4.1.559.1.2.1.28.4.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

ipxFirewallLowerSourceNetwork 1.3.6.1.4.1.559.1.2.1.28.4.1.2
The IPX Firewall source network number or the lower number of a range of source networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

ipxFirewallHigherSourceNetwork 1.3.6.1.4.1.559.1.2.1.28.4.1.3
The upper network number of a range of source networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

ipxFirewallLowerSourceNode 1.3.6.1.4.1.559.1.2.1.28.4.1.4
The IPX Firewall source node number or the lower number of a range of source nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

ipxFirewallHigherSourceNode 1.3.6.1.4.1.559.1.2.1.28.4.1.5
The upper node number of a range of source nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

ipxFirewallLowerSourceSocket 1.3.6.1.4.1.559.1.2.1.28.4.1.6
The IPX Firewall source socket number or the lower number of a range of source sockets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

ipxFirewallHigherSourceSocket 1.3.6.1.4.1.559.1.2.1.28.4.1.7
The upper socket number of a range of source sockets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

ipxFirewallLowerDestinationNetwork 1.3.6.1.4.1.559.1.2.1.28.4.1.8
The IPX Firewall destination network number or the lower number of a range of destination networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

ipxFirewallHigherDestinationNetwork 1.3.6.1.4.1.559.1.2.1.28.4.1.9
The upper network number of a range of destination networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

ipxFirewallLowerDestinationNode 1.3.6.1.4.1.559.1.2.1.28.4.1.10
The IPX Firewall destination node number or the lower number of a range of destination nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

ipxFirewallHigherDestinationNode 1.3.6.1.4.1.559.1.2.1.28.4.1.11
The upper node number of a range of destination nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

ipxFirewallLowerDestinationSocket 1.3.6.1.4.1.559.1.2.1.28.4.1.12
The IPX Firewall destination socket number or the lower number of a range of destination sockets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

ipxFirewallHigherDestinationSocket 1.3.6.1.4.1.559.1.2.1.28.4.1.13
The upper socket number of a range of destination sockets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

ipxFirewallRouterName 1.3.6.1.4.1.559.1.2.1.28.4.1.14
The Router name to which frames are forwarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ipxFirewallMode 1.3.6.1.4.1.559.1.2.1.28.4.1.15
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), insert(2), append(3), edit(4)  

ipxFirewallAction 1.3.6.1.4.1.559.1.2.1.28.4.1.16
Accept or Deny the frame
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), deny(2)  

ipxFirewallBidir 1.3.6.1.4.1.559.1.2.1.28.4.1.17
Apply to bidirectional traffic
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipNatTranslate 1.3.6.1.4.1.559.1.2.1.32.1
Network address translation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

ipNatIpAddress 1.3.6.1.4.1.559.1.2.1.32.2
The IP address which the network should masquerade as.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNatBogusNetwork 1.3.6.1.4.1.559.1.2.1.32.3
The IP network whose addresses are to be translated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNatBogusNetmask 1.3.6.1.4.1.559.1.2.1.32.4
The netmask of the IP network whose address are to be translated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNatTcpFinTimeout 1.3.6.1.4.1.559.1.2.1.32.5
The timeout period in seconds for NAT sessions using TCP which have been closed, but for which no Finis packet has been received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipNatTcpInactiveTimeout 1.3.6.1.4.1.559.1.2.1.32.6
The timeout period in seconds for NAT sessions using TCP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipNatUdpTimeout 1.3.6.1.4.1.559.1.2.1.32.7
The maximum duration in seconds for a NAT session using UDP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipNatMyself 1.3.6.1.4.1.559.1.2.1.32.8
Translation packets to unit's management address?.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

usercfgTable 1.3.6.1.4.1.559.1.2.1.29.1
A table of users which are allowed to use this router.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserCfgEntry

usercfgEntry 1.3.6.1.4.1.559.1.2.1.29.1.1
A list of users.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserCfgEntry  

usercfgIndex 1.3.6.1.4.1.559.1.2.1.29.1.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

usercfgName 1.3.6.1.4.1.559.1.2.1.29.1.1.2
The user name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

usercfgMac 1.3.6.1.4.1.559.1.2.1.29.1.1.3
The MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

usercfgAllowed 1.3.6.1.4.1.559.1.2.1.29.1.1.4
Make user active
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

usercfgMode 1.3.6.1.4.1.559.1.2.1.29.1.1.5
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), edit(4)  

srcEnabled 1.3.6.1.4.1.559.1.2.1.30
Flag to enabled or disabled Scaleable Router Clustering.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

srcPriority 1.3.6.1.4.1.559.1.2.1.31
Object used to manually set a device to be a Master or Slave device as part of Scaleable Router Clustering.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER primary(50), secondary(128), slave(200)  

dhcpAutoStatus 1.3.6.1.4.1.559.1.2.1.33.1
If enabled, DHCP Server will allocate addresses. Also, if enabled, DHCP Proxy and DHCP Relay will silently be disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dhcpAutoName 1.3.6.1.4.1.559.1.2.1.33.2
The stem of hostnames to be allocated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

dhcpAutoDomain 1.3.6.1.4.1.559.1.2.1.33.3
The domain-name of the hostnames to be allocated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

dhcpAutoSeedStart 1.3.6.1.4.1.559.1.2.1.33.4
Initial seed address used for automatically allocating IP addresses. Warning: if this is changed, the lease table gets cleared automatically!
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpAutoSeedEnd 1.3.6.1.4.1.559.1.2.1.33.5
Last seed address used for automatically allocating IP addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpAutoMask 1.3.6.1.4.1.559.1.2.1.33.6
Subnet mask supplied to clients when automatically allocating IP addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpAutoRouter 1.3.6.1.4.1.559.1.2.1.33.7
IP Addr of Default Router for client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpWINSTable 1.3.6.1.4.1.559.1.2.1.33.8
A table of WINS addresses supplied to clients.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpWINSEntry

dhcpWINSEntry 1.3.6.1.4.1.559.1.2.1.33.8.1
A WINS Address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DhcpWINSEntry  

dhcpWINSIndex 1.3.6.1.4.1.559.1.2.1.33.8.1.1
WINS Table Index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dhcpWINSAddr 1.3.6.1.4.1.559.1.2.1.33.8.1.2
IP Addr of a WINS server for client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpDNSTable 1.3.6.1.4.1.559.1.2.1.33.9
A table of DNS addresses supplied to clients.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpDNSEntry

dhcpDNSEntry 1.3.6.1.4.1.559.1.2.1.33.9.1
A DNS Address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DhcpDNSEntry  

dhcpDNSIndex 1.3.6.1.4.1.559.1.2.1.33.9.1.1
DNS Table Index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dhcpDNSAddr 1.3.6.1.4.1.559.1.2.1.33.9.1.2
IP Addr of a DNS server for client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpAutoLease 1.3.6.1.4.1.559.1.2.1.33.10
Address lease lifetime (in seconds). Lower limit is 300 (i.e. 5 min), upper limit is 43200 (i.e. 12 hours).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dhcpAstatTable 1.3.6.1.4.1.559.1.2.1.33.11
A table of automatically allocated IP addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpAstatEntry

dhcpAstatEntry 1.3.6.1.4.1.559.1.2.1.33.11.1
An automatically allocated IP address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DhcpAstatEntry  

dhcpAstatIpAddr 1.3.6.1.4.1.559.1.2.1.33.11.1.1
Automatically allocated IP Addr.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

dhcpAstatIf 1.3.6.1.4.1.559.1.2.1.33.11.1.2
Interface over which IP address was allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unused(0), lan(1)  

dhcpAstatHwAddr 1.3.6.1.4.1.559.1.2.1.33.11.1.3
Hardware address of client to which IP address was allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

dhcpAstatCID 1.3.6.1.4.1.559.1.2.1.33.11.1.4
Identifier of client to which IP address was allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

dhcpAstatLife 1.3.6.1.4.1.559.1.2.1.33.11.1.5
Remaining lifetime of lease. -1 if permanent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pppAuthTable 1.3.6.1.4.1.559.1.2.1.34
The PPP Authentication Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppAuthTableEntry

pppAuthTableEntry 1.3.6.1.4.1.559.1.2.1.34.1
PPP authentication table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppAuthTableEntry  

pppAuthIndex 1.3.6.1.4.1.559.1.2.1.34.1.1
Index into the PPP authentication table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pppAuthName 1.3.6.1.4.1.559.1.2.1.34.1.2
Name of the interface or ISDN number table entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..12)  

pppAuthClass 1.3.6.1.4.1.559.1.2.1.34.1.3
The PPP authentication mechanism used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), pap(2), chap(3)  

pppAuthLocalId 1.3.6.1.4.1.559.1.2.1.34.1.4
PPP authentication local ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..26)  

pppAuthLocalPw 1.3.6.1.4.1.559.1.2.1.34.1.5
PPP authentication local passwd. Always reads blank.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..12)  

pppAuthRemoteId 1.3.6.1.4.1.559.1.2.1.34.1.6
PPP authentication remote ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..26)  

pppAuthRemotePw 1.3.6.1.4.1.559.1.2.1.34.1.7
PPP authentication remote passwd. Always reads blank.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..12)  

pppAuthRetryPeriod 1.3.6.1.4.1.559.1.2.1.34.1.8
PPP authentication retry period in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..9999  

pppAuthRenegPeriod 1.3.6.1.4.1.559.1.2.1.34.1.9
PPP authentication renogotiation period in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..9999  

pppAuthRetryCount 1.3.6.1.4.1.559.1.2.1.34.1.10
PPP authentication maxiumum number of retries.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..999  

pppAuthMode 1.3.6.1.4.1.559.1.2.1.34.1.11
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), edit(4)  

primaryDNSAddress 1.3.6.1.4.1.559.1.2.1.35.1
The primary Domain Name System (DNS) server address to be advertised to clients. This value will be ignored if DNS Proxy is enabled, as in this case the address of this unit will be advertised instead. A value of 0.0.0.0 causes no address to be advertised.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

secondaryDNSAddress 1.3.6.1.4.1.559.1.2.1.35.2
The secondary Domain Name System (DNS) server address to be advertised to clients. This value will be ignored if DNS Proxy is enabled, as in this case the address of this unit will be advertised instead.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

primaryNBNSAddress 1.3.6.1.4.1.559.1.2.1.35.3
The primary Netbios Name Server (NBNS) address to be advertised to clients. A value of 0.0.0.0 causes no address to be advertised.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

secondaryNBNSAddress 1.3.6.1.4.1.559.1.2.1.35.4
The secondary Netbios Name Server (NBNS) address to be advertised to clients.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dnsProxyActive 1.3.6.1.4.1.559.1.2.1.35.5
TRUE if the DNS proxy is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

dnsCacheSize 1.3.6.1.4.1.559.1.2.1.35.6
Maximum number of entries which may be held in the DNS cache if DNS Proxy is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000  

dnsMaxServerTimeout 1.3.6.1.4.1.559.1.2.1.35.7
The maximum time in seconds for which DNS Proxy will wait for a response from a remote DNS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dnsServerRetries 1.3.6.1.4.1.559.1.2.1.35.8
The maximum number of times that transmission of a query to remote DNS servers will be attempted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dnsDomainTable 1.3.6.1.4.1.559.1.2.1.35.9
The DNS Domain Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DnsDomainTableEntry

dnsDomainTableEntry 1.3.6.1.4.1.559.1.2.1.35.9.1
Information about a DNS domain table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DnsDomainTableEntry  

dnsDomainTableIndex 1.3.6.1.4.1.559.1.2.1.35.9.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

dnsDomainDomainName 1.3.6.1.4.1.559.1.2.1.35.9.1.2
The DNS Domain Name to which this table entry applies.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

dnsDomainProfileIndex 1.3.6.1.4.1.559.1.2.1.35.9.1.3
The index of the DNS Profile table entry associated with this domain table entry. 0 indicates that there is no profile associated with this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

dnsDomainRemoteServer 1.3.6.1.4.1.559.1.2.1.35.9.1.4
The name of the route from which the addresses for remote DNS servers will be obtained. This field does not need to be set if there is a DNS Profile associated with this table entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

dnsDomainPrimaryDNS 1.3.6.1.4.1.559.1.2.1.35.9.1.5
The primary DNS server address for this domain. If this has the value 0.0.0.0 then the address is obtained from the remote server. This field does not need to be set if there is a DNS Profile associated with this table entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dnsDomainSecondaryDNS 1.3.6.1.4.1.559.1.2.1.35.9.1.6
The secondary DNS server address for this domain. This field does not need to be set if there is a DNS Profile associated with this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dnsDomainMode 1.3.6.1.4.1.559.1.2.1.35.9.1.7
The operation required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), insert(2), append(3), edit(4)  

dnsProfileTable 1.3.6.1.4.1.559.1.2.1.35.10
A table of configuration profiles which describe the route to a remote DNS server. Each entry may be associated with one or more entries in the DNS domain table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DnsProfileEntry

dnsProfileEntry 1.3.6.1.4.1.559.1.2.1.35.10.1
A list of configuration profiles for remote DNS servers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DnsProfileEntry  

dnsProfileIndex 1.3.6.1.4.1.559.1.2.1.35.10.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

dnsProfileName 1.3.6.1.4.1.559.1.2.1.35.10.1.2
The name of this DNS Profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..12)  

dnsProfileRemoteServer 1.3.6.1.4.1.559.1.2.1.35.10.1.3
The name of the route from which the addresses for remote DNS servers will be obtained.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

dnsProfilePrimaryDNS 1.3.6.1.4.1.559.1.2.1.35.10.1.4
The primary DNS server address associated with this profile. If this has the value 0.0.0.0 then the address is obtained from the remote server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dnsProfileSecondaryDNS 1.3.6.1.4.1.559.1.2.1.35.10.1.5
The secondary DNS server address associated with this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dnsProfileMode 1.3.6.1.4.1.559.1.2.1.35.10.1.6
The operation required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), add(3), edit(4)  

memoryFree 1.3.6.1.4.1.559.1.2.1.36.1
Total number of free bytes of memory
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

memoryTotal 1.3.6.1.4.1.559.1.2.1.36.2
Total number of bytes of memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fragmentCount 1.3.6.1.4.1.559.1.2.1.36.3
Number of fragments of memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fragmentLargest 1.3.6.1.4.1.559.1.2.1.36.4
Size of biggest fragment in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pool1size 1.3.6.1.4.1.559.1.2.1.36.5
Size of pool 1 in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pool2size 1.3.6.1.4.1.559.1.2.1.36.6
Size of pool 2 in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pool3size 1.3.6.1.4.1.559.1.2.1.36.7
Size of pool 3 in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pool4size 1.3.6.1.4.1.559.1.2.1.36.8
Size of pool 4 in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

traptableEntry 1.3.6.1.4.1.559.1.2.1.37.1
Trap Details.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrapTableEntry  

trapIndex 1.3.6.1.4.1.559.1.2.1.37.1.1
Trap-Table Index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

trapAddr 1.3.6.1.4.1.559.1.2.1.37.1.2
IP Addr of a trap target.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

trapPort 1.3.6.1.4.1.559.1.2.1.37.1.3
UDP Port on trap target.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

trapLogFull 1.3.6.1.4.1.559.1.2.1.37.1.4
Send LogFull Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapLogThreshold 1.3.6.1.4.1.559.1.2.1.37.1.5
Send LogThreshold Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapWarmStart 1.3.6.1.4.1.559.1.2.1.37.1.6
Send WarmStart Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapLinkDown 1.3.6.1.4.1.559.1.2.1.37.1.7
Send LinkDown Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapLinkUp 1.3.6.1.4.1.559.1.2.1.37.1.8
Send LinkUp Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapVoiceDown 1.3.6.1.4.1.559.1.2.1.37.1.9
Send VoiceDown Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapVoiceUp 1.3.6.1.4.1.559.1.2.1.37.1.10
Send VoiceUp Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapISDNDown 1.3.6.1.4.1.559.1.2.1.37.1.11
Send ISDNDown Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapISDNUp 1.3.6.1.4.1.559.1.2.1.37.1.12
Send ISDNUp Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapAlarm 1.3.6.1.4.1.559.1.2.1.37.1.13
Send Alarm Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapQ931Fail 1.3.6.1.4.1.559.1.2.1.37.1.14
Send Q931Fail Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapDASS2Fail 1.3.6.1.4.1.559.1.2.1.37.1.15
Send DASS2Fail Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapBriFail 1.3.6.1.4.1.559.1.2.1.37.1.16
Send BriFail Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapLoginAuth 1.3.6.1.4.1.559.1.2.1.37.1.17
Send LoginAuth Trap?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

isdnTestCallEvent 1
The isdnTestCallEvent Trap is sent whenever an ISDN test autocall is made, and is unsuccessful.
TRAP-TYPE    

isdnLinkDownEvent 2
The isdnLinkEvent is sent whenever an ISDN Link has been disconnected. This should be used in conjunction with the associated MIBII object.
TRAP-TYPE    

isdnLinkUpEvent 3
The isdnLinkEvent is sent whenever an ISDN Link has been established and dataflow is granted. This should be used in conjunction with the associated MIBII object.
TRAP-TYPE    

q931FailCauseEvent 6
The q931FailCauseEvent is sent whenever a Q931 ISDN call is attempted but fails due to isdnFailCauseCode reason
TRAP-TYPE    

dass2FailCauseEvent 7
The dassFailCauseEvent is sent whenever a DASS2 ISDN call is attempted but fails due to isdnFailCauseCode reason
TRAP-TYPE    

briFailCauseEvent 8
The briFailCauseEvent is sent whenever a BRI ISDN call is attempted but fails due to isdnFailCauseCode reason
TRAP-TYPE    

radiusTrapEvent 20
The RadiusTrapEvent is sent whenever a user attempts to log into a unit and RADIUS authentication is enabled. The RadiusReply indicates level of authentication granted to the user (if any). The RadiusUsername shows the username entered at the login prompt.
TRAP-TYPE    

loginTrapEvent 21
The LoginTrapEvent is sent whenever a user attempts to log into a unit and RADIUS authentication fails. The boolean LoginCode indicates whether the user sucessfully logged in with the default password.
TRAP-TYPE    

cscmTrapEvent 100
The cscmTrapEvent is sent by the CSCM management system whenever an event occurs for a unit on the system that has been setup with trap information and flagged to send it
TRAP-TYPE    

patTable 1.3.6.1.4.1.559.1.2.1.38
A table of Port Address Translation entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PatEntry

patEntry 1.3.6.1.4.1.559.1.2.1.38.1
A list of PAT entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PatEntry  

patIndex 1.3.6.1.4.1.559.1.2.1.38.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

patPort 1.3.6.1.4.1.559.1.2.1.38.1.2
The port to listen on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

patInternalIP 1.3.6.1.4.1.559.1.2.1.38.1.3
The IP address to forward to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

patInternalPort 1.3.6.1.4.1.559.1.2.1.38.1.4
The port to forward to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

patMode 1.3.6.1.4.1.559.1.2.1.38.1.5
The Operation Required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), edit(4)  

tpadLanPort 1.3.6.1.4.1.559.1.2.1.39
The port number of the virtual LAN connection to the AT interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

tftpFile 1.3.6.1.2.1.16.19.6
The file name to be LOADED from or STORED on the TFTP server, when a download is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

tftpServerIP 1.3.6.1.2.1.16.19.7
The IP address of the TFTP server that contains the image to LOAD or STORE when a LOAD or STORE is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tftpAction 1.3.6.1.2.1.16.19.8
When this object is set to LOAD (2) or STORE (3), the device will discontinue its normal operation and begin loading or storing of the image specified by probeDownloadFile using the TFTP protocol. If LOAD(2) is specified, the new image is copied from the TFTP Server to the unit. If STORE(3)is specified the image is written to the TFTP Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), load(2), store(3)  

tftpStatus 1.3.6.1.2.1.16.19.9
The status of the last download procedure, if any. This object will have a value of StatusUnknown(2) if no LOAD or STORE process has been performed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), statusunknown(2), generalerror(3), noresponsefromserver(4), checksumerror(5), incompatibleimage(6), tftpfilenotfound(7), tftpaccessviolation(8)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor