REDSTONE-OSPF-MIB

File: REDSTONE-OSPF-MIB.mib (6927 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF OSPF-MIB
REDSTONE-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP ospfIfEntry
rsMgmt

Defined Types

RsOspfIfEntry  
SEQUENCE    
  rsOspfIfCost Integer32

Defined Values

rsOspfMIB 1.3.6.1.4.1.2773.2.14
The OSPF Protocol MIB for the Redstone Communications Inc. enterprise.
MODULE-IDENTITY    

rsOspfObjects 1.3.6.1.4.1.2773.2.14.1
OBJECT IDENTIFIER    

rsOspfGeneralGroup 1.3.6.1.4.1.2773.2.14.1.1
OBJECT IDENTIFIER    

rsOspfProcessId 1.3.6.1.4.1.2773.2.14.1.1.1
An identifier having special semantics when set. When this object's value is zero, OSPF is disabled and cannot be configured. Setting this object to a nonzero value enables OSPF operation and permits further OSPF configuration to be performed. When this object's value is nonzero, setting it to a value of zero disables OSPF operation and clears all existing OSPF configuration. Once set to a nonzero value, this object cannot be set to a different nonzero value without first setting it to zero. (This MIB object mimics the behavior of the OSPF 'process ID' parameter used through the command-line interface.)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

rsOspfMaxPathSplits 1.3.6.1.4.1.2773.2.14.1.1.2
The maximum number of equal-cost routes that will be maintained by the OSPF protocol. A change in this value will be taken into account at the next shortest-path-first recalculation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

rsOspfSpfHoldInterval 1.3.6.1.4.1.2773.2.14.1.1.3
The minimum amount of time that must elapse between shortest-path-first recalculations. Reducing this value can cause an immediate SPF recalulation if the new value is less than the current value of rsOspfSpfHoldTimeRemaining and other SPF-inducing protocol events have occurred.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..5  

rsOspfIfTable 1.3.6.1.4.1.2773.2.14.1.2
The Redstone OSPF Interface Table describes the OSPF-specific characteristics of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsOspfIfEntry

rsOspfIfEntry 1.3.6.1.4.1.2773.2.14.1.2.1
The OSPF Interface Entry describes OSPF-specific characteristics of one interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  RsOspfIfEntry  

rsOspfIfCost 1.3.6.1.4.1.2773.2.14.1.2.1.1
The cost value for this interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

rsOspfConformance 1.3.6.1.4.1.2773.2.14.4
OBJECT IDENTIFIER    

rsOspfCompliances 1.3.6.1.4.1.2773.2.14.4.1
OBJECT IDENTIFIER    

rsOspfGroups 1.3.6.1.4.1.2773.2.14.4.2
OBJECT IDENTIFIER    

rsOspfCompliance 1.3.6.1.4.1.2773.2.14.4.1.1
The compliance statement for entities which implement the Redstone OSPF MIB.
Status: current Access: read-create
MODULE-COMPLIANCE    

rsOspfBasicGroup 1.3.6.1.4.1.2773.2.14.4.2.1
A collection of objects for managing general OSPF capabilities in a Redstone product.
Status: current Access: read-create
OBJECT-GROUP    

rsOspfIfGroup 1.3.6.1.4.1.2773.2.14.4.2.2
A collection of objects for managing OSPF Interface capabilities in a Redstone product.
Status: current Access: read-create
OBJECT-GROUP