RC-RADIUS-MIB

File: RC-RADIUS-MIB.mib (51355 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
IF-MIB RAPID-CITY

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 IpAddress TimeTicks
TruthValue RowStatus DisplayString
MacAddress SnmpAdminString InterfaceIndex
rcRadius rcEap

Defined Types

RcRadiusServerEntry  
SEQUENCE    
  rcRadiusServerPriority INTEGER
  rcRadiusServerAddress IpAddress
  rcRadiusServerTimeOut INTEGER
  rcRadiusServerEnable TruthValue
  rcRadiusServerMaxRetries INTEGER
  rcRadiusServerUdpPort INTEGER
  rcRadiusServerSecretKey DisplayString
  rcRadiusServerAccessRequests Counter32
  rcRadiusServerAccessAccepts Counter32
  rcRadiusServerAccessRejects Counter32
  rcRadiusServerBadResponses Counter32
  rcRadiusServerPendingRequests Counter32
  rcRadiusServerClientRetries Counter32
  rcRadiusServerRowStatus RowStatus
  rcRadiusServerAcctEnable TruthValue
  rcRadiusServerAcctUdpPort INTEGER
  rcRadiusServerAcctOnRequests Counter32
  rcRadiusServerAcctOffRequests Counter32
  rcRadiusServerAcctStartRequests Counter32
  rcRadiusServerAcctStopRequests Counter32
  rcRadiusServerAcctInterimRequests Counter32
  rcRadiusServerAcctBadResponses Counter32
  rcRadiusServerAcctPendingRequests Counter32
  rcRadiusServerAcctClientRetries Counter32

RcRadiusServEntry  
SEQUENCE    
  rcRadiusServPriority INTEGER
  rcRadiusServAddress IpAddress
  rcRadiusServTimeOut INTEGER
  rcRadiusServEnable TruthValue
  rcRadiusServMaxRetries INTEGER
  rcRadiusServUdpPort INTEGER
  rcRadiusServSecretKey DisplayString
  rcRadiusServAccessRequests Counter32
  rcRadiusServAccessAccepts Counter32
  rcRadiusServAccessRejects Counter32
  rcRadiusServBadResponses Counter32
  rcRadiusServPendingRequests Counter32
  rcRadiusServClientRetries Counter32
  rcRadiusServRowStatus RowStatus
  rcRadiusServAcctEnable TruthValue
  rcRadiusServAcctUdpPort INTEGER
  rcRadiusServAcctOnRequests Counter32
  rcRadiusServAcctOffRequests Counter32
  rcRadiusServAcctStartRequests Counter32
  rcRadiusServAcctStopRequests Counter32
  rcRadiusServAcctInterimRequests Counter32
  rcRadiusServAcctBadResponses Counter32
  rcRadiusServAcctPendingRequests Counter32
  rcRadiusServAcctClientRetries Counter32
  rcRadiusServUsedBy INTEGER
  rcRadiusServNasIpAddress IpAddress
  rcRadiusServRoundTripTime DisplayString
  rcRadiusServAccessChallanges Counter32
  rcRadiusServSourceIpAddr IpAddress

RcEapPortEntry  
SEQUENCE    
  rcEapPortIndex InterfaceIndex
  rcEapPortGuestVlanEnable TruthValue
  rcEapPortGuestVlanId INTEGER
  rcEapPortMultiHostEnable TruthValue
  rcEapPortMultiHostMaxClients INTEGER
  rcEapPortAllowNonEapHost TruthValue
  rcEapPortNonEapMaxClients INTEGER
  rcEapPortRadAuthNonEapClients TruthValue
  rcEapPortShutDownOnIntrusion TruthValue

RcEapPortAllowedMacEntry  
SEQUENCE    
  rcEapPortAllowedMacPort InterfaceIndex
  rcEapPortAllowedMacAddr MacAddress
  rcEapPortAllowedMacRowStatus RowStatus

RcEapMultiHostStatusEntry  
SEQUENCE    
  rcEapMultiHostStatusPortNumber InterfaceIndex
  rcEapMultiHostStatusClientMACAddr MacAddress
  rcEapMultiHostStatusPaeState INTEGER
  rcEapMultiHostStatusBackendAuthState INTEGER

RcEapMultiHostSessionStatsEntry  
SEQUENCE    
  rcEapMultiHostSessionStatsPortNumber InterfaceIndex
  rcEapMultiHostSessionStatsClientMACAddr MacAddress
  rcEapMultiHostSessionId SnmpAdminString
  rcEapMultiHostSessionAuthenticMethod INTEGER
  rcEapMultiHostSessionTime TimeTicks
  rcEapMultiHostSessionTerminateCause INTEGER
  rcEapMultiHostSessionUserName SnmpAdminString

RcEapPortRadiusMacEntry  
SEQUENCE    
  rcEapPortRadiusMacPort InterfaceIndex
  rcEapPortRadiusMacAddr MacAddress
  rcEapPortRadiusMacStatus INTEGER

Defined Values

rcRadiusMib 1.3.6.1.4.1.2272.1.29.0
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY    

rcRadiusGlobal 1.3.6.1.4.1.2272.1.29.1
OBJECT IDENTIFIER    

rcRadiusGlobalEnable 1.3.6.1.4.1.2272.1.29.1.1
Enable/disable this feature.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusGlobalMaxNumberServer 1.3.6.1.4.1.2272.1.29.1.2
Maximum number of RADIUS servers.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

rcRadiusGlobalAttributeValue 1.3.6.1.4.1.2272.1.29.1.3
Integer value for Access-Priority attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 192..240  

rcRadiusGlobalServerTableSize 1.3.6.1.4.1.2272.1.29.1.4
Used to indicate the number of entries in the rcRadiusServerTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcRadiusGlobalAcctEnable 1.3.6.1.4.1.2272.1.29.1.5
Enable/disable Radius Accounting feature.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusGlobalAcctAttributeValue 1.3.6.1.4.1.2272.1.29.1.6
Integer value for User-Command attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 192..240  

rcRadiusGlobalAcctIncludeCli 1.3.6.1.4.1.2272.1.29.1.7
Include/Exclude cli-commands in radius acccounting updates.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusGlobalClearStat 1.3.6.1.4.1.2272.1.29.1.8
Clear Radius Statistic for all servers configured.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusGlobalMcastAttributeValue 1.3.6.1.4.1.2272.1.29.1.9
Integer value for multicast address vendor specific attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rcRadiusGlobalAuthInfoAttributeValue 1.3.6.1.4.1.2272.1.29.1.10
Integer value for Auth-Info vendor specific attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rcRadiusGlobalCommandAccess 1.3.6.1.4.1.2272.1.29.1.11
Integer value for Command-Access attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 192..240  

rcRadiusGlobalCliCommands 1.3.6.1.4.1.2272.1.29.1.12
Integer value for Cli-Command attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 192..240  

rcRadiusGlobalIgapLogFSize 1.3.6.1.4.1.2272.1.29.1.13
Maximum size for the IGAP accounting time-out log file in KB.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 50..8192  

rcRadiusGlobalCliProfEnable 1.3.6.1.4.1.2272.1.29.1.14
Enable/disable Radius CLI Profiling.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusGlobalAuthInvalidServerAddress 1.3.6.1.4.1.2272.1.29.1.15
Number of Access Responses from unknown or invalid Radius servers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusGlobalSourceIpFlag 1.3.6.1.4.1.2272.1.29.1.16
Flag to include configured IP address as source address in RADIUS packets.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusGlobalIgapPasswdAttr 1.3.6.1.4.1.2272.1.29.1.17
When this variable is set to standard(1), password in IGAP join request is sent in standard RADIUS password attribute. When set to authinfo(2), the password is encoded in Auth-Info attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER standard(1), authinfo(2)  

rcRadiusGlobalCliCmdCount 1.3.6.1.4.1.2272.1.29.1.18
Integer value for Cli-Command-count.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..40  

rcRadiusServerTable 1.3.6.1.4.1.2272.1.29.2
The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcRadiusServerEntry

rcRadiusServerEntry 1.3.6.1.4.1.2272.1.29.2.1
A RADIUS server table entry.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcRadiusServerEntry  

rcRadiusServerPriority 1.3.6.1.4.1.2272.1.29.2.1.1
Server priority, used to control which server to choose first to send authentication.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

rcRadiusServerAddress 1.3.6.1.4.1.2272.1.29.2.1.2
Server IP address of the RADIUS authentication server referred to in this table entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

rcRadiusServerTimeOut 1.3.6.1.4.1.2272.1.29.2.1.3
The time interval in seconds before the client retransmit the packet.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

rcRadiusServerEnable 1.3.6.1.4.1.2272.1.29.2.1.4
Enable or disable this server.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusServerMaxRetries 1.3.6.1.4.1.2272.1.29.2.1.5
Maximum number of retransmissions.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..6  

rcRadiusServerUdpPort 1.3.6.1.4.1.2272.1.29.2.1.6
The UDP port the client is using to send requests to this server.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..65536  

rcRadiusServerSecretKey 1.3.6.1.4.1.2272.1.29.2.1.7
The identifier of the RADIUS authentication client.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

rcRadiusServerAccessRequests 1.3.6.1.4.1.2272.1.29.2.1.8
The number of RADIUS access-response packets sent to this server. This does not include retransmissions.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerAccessAccepts 1.3.6.1.4.1.2272.1.29.2.1.9
The number of RADIUS access-accept packets (valid or invalid) received from this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerAccessRejects 1.3.6.1.4.1.2272.1.29.2.1.10
The number of RADIUS access-reject packets (valid or invalid) received from this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerBadResponses 1.3.6.1.4.1.2272.1.29.2.1.11
The number of RADIUS invalid access-response packets received from this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerPendingRequests 1.3.6.1.4.1.2272.1.29.2.1.12
The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of an access-accept, access-reject, a timeout or retransmission.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerClientRetries 1.3.6.1.4.1.2272.1.29.2.1.13
The number of authentication retransmission to this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerRowStatus 1.3.6.1.4.1.2272.1.29.2.1.14
Used to create/delete entries.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcRadiusServerAcctEnable 1.3.6.1.4.1.2272.1.29.2.1.15
Enable or disable Radius Accounting on this server.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusServerAcctUdpPort 1.3.6.1.4.1.2272.1.29.2.1.16
The UDP port the client used to send accounting requests to this server.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..65536  

rcRadiusServerAcctOnRequests 1.3.6.1.4.1.2272.1.29.2.1.17
The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerAcctOffRequests 1.3.6.1.4.1.2272.1.29.2.1.18
The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerAcctStartRequests 1.3.6.1.4.1.2272.1.29.2.1.19
The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerAcctStopRequests 1.3.6.1.4.1.2272.1.29.2.1.20
The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerAcctInterimRequests 1.3.6.1.4.1.2272.1.29.2.1.21
The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerAcctBadResponses 1.3.6.1.4.1.2272.1.29.2.1.22
The number of Invalid responses received from this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerAcctPendingRequests 1.3.6.1.4.1.2272.1.29.2.1.23
The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or timeout occurs.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServerAcctClientRetries 1.3.6.1.4.1.2272.1.29.2.1.24
The number of RADIUS accounting packets retransmitted to this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServTable 1.3.6.1.4.1.2272.1.29.3
The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcRadiusServEntry

rcRadiusServEntry 1.3.6.1.4.1.2272.1.29.3.1
A RADIUS server table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcRadiusServEntry  

rcRadiusServPriority 1.3.6.1.4.1.2272.1.29.3.1.1
Server priority, used to control which server to choose first to send authentication.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

rcRadiusServAddress 1.3.6.1.4.1.2272.1.29.3.1.2
Server IP address of the RADIUS authentication server referred to in this table entry.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcRadiusServTimeOut 1.3.6.1.4.1.2272.1.29.3.1.3
The time interval in seconds before the client retransmit the packet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

rcRadiusServEnable 1.3.6.1.4.1.2272.1.29.3.1.4
Enable or disable this server.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusServMaxRetries 1.3.6.1.4.1.2272.1.29.3.1.5
Maximum number of retransmissions.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..6  

rcRadiusServUdpPort 1.3.6.1.4.1.2272.1.29.3.1.6
The UDP port the client is using to send requests to this server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65536  

rcRadiusServSecretKey 1.3.6.1.4.1.2272.1.29.3.1.7
The identifier of the RADIUS authentication client.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

rcRadiusServAccessRequests 1.3.6.1.4.1.2272.1.29.3.1.8
The number of RADIUS access-response packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServAccessAccepts 1.3.6.1.4.1.2272.1.29.3.1.9
The number of RADIUS access-accept packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServAccessRejects 1.3.6.1.4.1.2272.1.29.3.1.10
The number of RADIUS access-reject packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServBadResponses 1.3.6.1.4.1.2272.1.29.3.1.11
The number of RADIUS invalid access-response packets received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServPendingRequests 1.3.6.1.4.1.2272.1.29.3.1.12
The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of an access-accept, access-reject, a timeout or retransmission.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServClientRetries 1.3.6.1.4.1.2272.1.29.3.1.13
The number of authentication retransmission to this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServRowStatus 1.3.6.1.4.1.2272.1.29.3.1.14
Used to create/delete entries.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcRadiusServAcctEnable 1.3.6.1.4.1.2272.1.29.3.1.15
Enable or disable Radius Accounting on this server.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusServAcctUdpPort 1.3.6.1.4.1.2272.1.29.3.1.16
The UDP port the client used to send accounting requests to this server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65536  

rcRadiusServAcctOnRequests 1.3.6.1.4.1.2272.1.29.3.1.17
The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServAcctOffRequests 1.3.6.1.4.1.2272.1.29.3.1.18
The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServAcctStartRequests 1.3.6.1.4.1.2272.1.29.3.1.19
The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServAcctStopRequests 1.3.6.1.4.1.2272.1.29.3.1.20
The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServAcctInterimRequests 1.3.6.1.4.1.2272.1.29.3.1.21
The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServAcctBadResponses 1.3.6.1.4.1.2272.1.29.3.1.22
The number of Invalid responses received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServAcctPendingRequests 1.3.6.1.4.1.2272.1.29.3.1.23
The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or timeout occurs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServAcctClientRetries 1.3.6.1.4.1.2272.1.29.3.1.24
The number of RADIUS accounting packets retransmitted to this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServUsedBy 1.3.6.1.4.1.2272.1.29.3.1.25
cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cli(1), igap(2), snmp(3), eap(4)  

rcRadiusServNasIpAddress 1.3.6.1.4.1.2272.1.29.3.1.26
RADIUS Client NAS Identifier for this server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcRadiusServRoundTripTime 1.3.6.1.4.1.2272.1.29.3.1.27
Time different between the instance when a RADIUS request is sent and the corresponding response is received.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

rcRadiusServAccessChallanges 1.3.6.1.4.1.2272.1.29.3.1.28
The number of RADIUS access-challanges packets sent to this server. This does not include retransmission.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcRadiusServSourceIpAddr 1.3.6.1.4.1.2272.1.29.3.1.29
source IP address RADIUS packets.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcRadiusGlobalSnmp 1.3.6.1.4.1.2272.1.29.4
OBJECT IDENTIFIER    

rcRadiusGlobalSnmpEnable 1.3.6.1.4.1.2272.1.29.4.1
Enable/disable snmp radius authentication.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusGlobalSnmpAcctEnable 1.3.6.1.4.1.2272.1.29.4.2
Enable/disable Radius Accounting for SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRadiusGlobalSnmpReAuthenticateTimer 1.3.6.1.4.1.2272.1.29.4.3
Integer value representing Re-Authenticate Timer in seconds. Timer to be used to Re- Authenticate a SNMP Session.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 30..65535  

rcRadiusGlobalSnmpAbortSessionTimer 1.3.6.1.4.1.2272.1.29.4.4
Integer value representing the time in seconds after which the snmp session is considered expired and Radius Accounting Stop message is sent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 30..65535  

rcRadiusGlobalSnmpUserName 1.3.6.1.4.1.2272.1.29.4.5
User name for Radius SNMP Accounting.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

rcRadiusEapLastRejMac 1.3.6.1.4.1.2272.1.29.4.6
Used to store the Last Rejected MAC address on an EAP enabled port.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcRadiusPaePortNumber 1.3.6.1.4.1.2272.1.29.4.7
Used to store the Port Number on which a MAC intrusion occurred.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcRadiusEapLastAuthMac 1.3.6.1.4.1.2272.1.29.4.8
Used to store the Last Authenticated MAC address on an EAP enabled port.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcEapGlobal 1.3.6.1.4.1.2272.1.57.1
OBJECT IDENTIFIER    

rcEapGlobalRadAcctEnable 1.3.6.1.4.1.2272.1.57.1.1
Indicates whether EAP Sessions need to be Accounted with a RADIUS server. When this value is TRUE, device attempts to send RADIUS Accounting-Start and Accounting-Stop requests upon 802.1x user login and logoff respectively.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcEapGlobalClearStats 1.3.6.1.4.1.2272.1.57.1.2
When the value of this variable is set to TRUE, all the EAPOL (8021x) related statistics will be reset.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcEapGlobalGuestVlanEnable 1.3.6.1.4.1.2272.1.57.1.3
When this variable is set to TRUE, EAPoL Guest Vlan feature will be enabled globally
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcEapGlobalGuestVlanId 1.3.6.1.4.1.2272.1.57.1.4
A value representing the VLAN to be used as a Global Guest VLAN. When corresponding value is not specified at the port level, supplicants are granted access to the network through this VLAN before they are authenticated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4000  

rcEapGlobalRadAuthNonEapClients 1.3.6.1.4.1.2272.1.57.1.5
When this variable is set to TRUE, Radius Mac Centralization feature will be enabled globally
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcEapGlobalRadDiscardFilterAgeout 1.3.6.1.4.1.2272.1.57.1.6
Age out period for pending non-eap-macs due to server timeout or unreachable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..3600  

rcEapPortTable 1.3.6.1.4.1.2272.1.57.2
EAP properietery table for port level commands
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcEapPortEntry

rcEapPortEntry 1.3.6.1.4.1.2272.1.57.2.1
Entry containing the EAP properietry configuration information at the port level.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcEapPortEntry  

rcEapPortIndex 1.3.6.1.4.1.2272.1.57.2.1.1
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

rcEapPortGuestVlanEnable 1.3.6.1.4.1.2272.1.57.2.1.2
When this variable is set to TRUE, EAPoL Guest Vlan feature will be enabled on the port
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcEapPortGuestVlanId 1.3.6.1.4.1.2272.1.57.2.1.3
A value representing the VLAN to be used as a Guest VLAN. Access to the host/s connected to this port is provided through this VLAN before any of the hosts are EAP (802.1X) authenticated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4000  

rcEapPortMultiHostEnable 1.3.6.1.4.1.2272.1.57.2.1.4
When this variable is set to TRUE, the system is enabled to have multiple 802.1X supplicants authenticated from the same port
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcEapPortMultiHostMaxClients 1.3.6.1.4.1.2272.1.57.2.1.5
Integer value representing the maximum number of supplicants that are allowed to get authenticated on the port. This is applicable rcEapPortMultiHostEnable is set to TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

rcEapPortAllowNonEapHost 1.3.6.1.4.1.2272.1.57.2.1.6
When this variable is set to TRUE, the system is enabled to allow hosts that do not participate in 802.1X authentication to get network access.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcEapPortNonEapMaxClients 1.3.6.1.4.1.2272.1.57.2.1.7
Integer value representing the maximum number of non-802.1X hosts that are allowed to connect to the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

rcEapPortRadAuthNonEapClients 1.3.6.1.4.1.2272.1.57.2.1.8
When this variable is set to TRUE, the system is enabled to allow Non-Eap hosts on the port to get network access through radius based Mac authorization.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcEapPortShutDownOnIntrusion 1.3.6.1.4.1.2272.1.57.2.1.9
When this variable is set to TRUE, the port is shutdown on encountering [max + 1st] non-eap client on the port
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcEapPortAllowedMacTable 1.3.6.1.4.1.2272.1.57.3
EAP properietery table for allowed mac addresses of non EAP clients
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcEapPortAllowedMacEntry

rcEapPortAllowedMacEntry 1.3.6.1.4.1.2272.1.57.3.1
Entry containing MAC addresses for Non EAP hosts allowed on the port
Status: current Access: not-accessible
OBJECT-TYPE    
  RcEapPortAllowedMacEntry  

rcEapPortAllowedMacPort 1.3.6.1.4.1.2272.1.57.3.1.1
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

rcEapPortAllowedMacAddr 1.3.6.1.4.1.2272.1.57.3.1.2
MAC address of a non EAP host that is granted access on the port.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

rcEapPortAllowedMacRowStatus 1.3.6.1.4.1.2272.1.57.3.1.3
Used to create/delete entries in rcEapPortAllowedMacTable.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcEapMultiHostStatusTable 1.3.6.1.4.1.2272.1.57.4
This table is used to control the EAP multihost configuration for each port in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcEapMultiHostStatusEntry

rcEapMultiHostStatusEntry 1.3.6.1.4.1.2272.1.57.4.1
The EAP multihost configuration for a port.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcEapMultiHostStatusEntry  

rcEapMultiHostStatusPortNumber 1.3.6.1.4.1.2272.1.57.4.1.1
The Port number associated with this client.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

rcEapMultiHostStatusClientMACAddr 1.3.6.1.4.1.2272.1.57.4.1.2
The MAC address of the client.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

rcEapMultiHostStatusPaeState 1.3.6.1.4.1.2272.1.57.4.1.3
The current value of the Authenticator PAE state machine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9)  

rcEapMultiHostStatusBackendAuthState 1.3.6.1.4.1.2272.1.57.4.1.4
The current state of the Backend Authentication state machine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7)  

rcEapMultiHostSessionStatsTable 1.3.6.1.4.1.2272.1.57.5
A table that contains the session statistics objects for the Authenticator PAE associated with each EAP client on each Port.An entry appears in this table for each client MAC address on each port that may authenticate access to itself.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcEapMultiHostSessionStatsEntry

rcEapMultiHostSessionStatsEntry 1.3.6.1.4.1.2272.1.57.5.1
The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session for each client where there is no session currently active.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcEapMultiHostSessionStatsEntry  

rcEapMultiHostSessionStatsPortNumber 1.3.6.1.4.1.2272.1.57.5.1.1
The Port number associated with this client.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

rcEapMultiHostSessionStatsClientMACAddr 1.3.6.1.4.1.2272.1.57.5.1.2
The MAC address of this client.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

rcEapMultiHostSessionId 1.3.6.1.4.1.2272.1.57.5.1.3
A unique identifier for the session, in the form of a printable ASCII string of at least three characters.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rcEapMultiHostSessionAuthenticMethod 1.3.6.1.4.1.2272.1.57.5.1.4
The authentication method used to establish the session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER remoteAuthServer(1), localAuthServer(2)  

rcEapMultiHostSessionTime 1.3.6.1.4.1.2272.1.57.5.1.5
The duration of the session in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

rcEapMultiHostSessionTerminateCause 1.3.6.1.4.1.2272.1.57.5.1.6
The reason for the session termination.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supplicantLogoff(1), portFailure(2), supplicantRestart(3), reauthFailed(4), authControlForceUnauth(5), portReInit(6), portAdminDisabled(7), notTerminatedYet(999)  

rcEapMultiHostSessionUserName 1.3.6.1.4.1.2272.1.57.5.1.7
The User-Name representing the identity of the Supplicant PAE.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rcEapPortRadiusMacTable 1.3.6.1.4.1.2272.1.57.6
EAP proprietary table for non-EAP hosts authenticated using radius server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcEapPortRadiusMacEntry

rcEapPortRadiusMacEntry 1.3.6.1.4.1.2272.1.57.6.1
Entry containing MAC addresses for Non EAP hosts authenticated using radius server.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcEapPortRadiusMacEntry  

rcEapPortRadiusMacPort 1.3.6.1.4.1.2272.1.57.6.1.1
An index value that uniquely identifies a port.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

rcEapPortRadiusMacAddr 1.3.6.1.4.1.2272.1.57.6.1.2
MAC address of a non EAP host that is authenticated using radius server.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

rcEapPortRadiusMacStatus 1.3.6.1.4.1.2272.1.57.6.1.3
Authentication status of the non EAP host that is authenticated using radius server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER authenticated(1), rejected(2), pending(3), radius-request-dropped(4), radius-server-not-reachable(5)