RC-POM-MIB

File: RC-POM-MIB.mib (38230 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
RAPID-CITY

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
DisplayString	TruthValue	InterfaceIndex
rcPlugOptMod	EnableValue

Defined Types

RcPlugOptModEntry
SEQUENCE
	rcPlugOptModPortIndex	InterfaceIndex
	rcPlugOptModDdmStatusMask	BITS
	rcPlugOptModCalibration	INTEGER
	rcPlugOptModPowerMeasure	INTEGER
	rcPlugOptModConnectorType	DisplayString
	rcPlugOptModVendorName	DisplayString
	rcPlugOptModVendorPartNumber	DisplayString
	rcPlugOptModVendorRevNumber	DisplayString
	rcPlugOptModVendorSN	DisplayString
	rcPlugOptModVendorDateCode	DisplayString
	rcPlugOptModPEC	DisplayString
	rcPlugOptModCLEI	DisplayString
	rcPlugOptModSupportsDDM	TruthValue
	rcPlugOptModAux1Monitoring	INTEGER
	rcPlugOptModAux2Monitoring	INTEGER
	rcPlugOptModWaveLength	Integer32
	rcPlugOptModTemperature	Integer32
	rcPlugOptModTemperatureHighAlarmThreshold	Integer32
	rcPlugOptModTemperatureLowAlarmThreshold	Integer32
	rcPlugOptModTemperatureHighWarningThreshold	Integer32
	rcPlugOptModTemperatureLowWarningThreshold	Integer32
	rcPlugOptModVoltage	Integer32
	rcPlugOptModVoltageHighAlarmThreshold	Integer32
	rcPlugOptModVoltageLowAlarmThreshold	Integer32
	rcPlugOptModVoltageHighWarningThreshold	Integer32
	rcPlugOptModVoltageLowWarningThreshold	Integer32
	rcPlugOptModBias	Integer32
	rcPlugOptModBiasHighAlarmThreshold	Integer32
	rcPlugOptModBiasLowAlarmThreshold	Integer32
	rcPlugOptModBiasHighWarningThreshold	Integer32
	rcPlugOptModBiasLowWarningThreshold	Integer32
	rcPlugOptModTxPower	Integer32
	rcPlugOptModTxPowerHighAlarmThreshold	Integer32
	rcPlugOptModTxPowerLowAlarmThreshold	Integer32
	rcPlugOptModTxPowerHighWarningThreshold	Integer32
	rcPlugOptModTxPowerLowWarningThreshold	Integer32
	rcPlugOptModRxPower	Integer32
	rcPlugOptModRxPowerHighAlarmThreshold	Integer32
	rcPlugOptModRxPowerLowAlarmThreshold	Integer32
	rcPlugOptModRxPowerHighWarningThreshold	Integer32
	rcPlugOptModRxPowerLowWarningThreshold	Integer32
	rcPlugOptModAux1	Integer32
	rcPlugOptModAux1HighAlarmThreshold	Integer32
	rcPlugOptModAux1LowAlarmThreshold	Integer32
	rcPlugOptModAux1HighWarningThreshold	Integer32
	rcPlugOptModAux1LowWarningThreshold	Integer32
	rcPlugOptModAux2	Integer32
	rcPlugOptModAux2HighAlarmThreshold	Integer32
	rcPlugOptModAux2LowAlarmThreshold	Integer32
	rcPlugOptModAux2HighWarningThreshold	Integer32
	rcPlugOptModAux2LowWarningThreshold	Integer32
	rcPlugOptModTemperatureStatus	INTEGER
	rcPlugOptModVoltageStatus	INTEGER
	rcPlugOptModBiasStatus	INTEGER
	rcPlugOptModTxPowerStatus	INTEGER
	rcPlugOptModRxPowerStatus	INTEGER
	rcPlugOptModAux1Status	INTEGER
	rcPlugOptModAux2Status	INTEGER

Defined Values

rcPlugOptModTableMib		1.3.6.1.4.1.2272.1.71.0
OE MIB for Digital Diagnostic Monitoring of pluggable optical modules
MODULE-IDENTITY

rcPlugOptModTable		1.3.6.1.4.1.2272.1.71.1
Gibc SFF diagnostic info table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPlugOptModEntry

rcPlugOptModEntry		1.3.6.1.4.1.2272.1.71.1.1
Entry containing info. for a particular port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPlugOptModEntry

rcPlugOptModPortIndex		1.3.6.1.4.1.2272.1.71.1.1.1
An index value that uniquely identifies a port on a blade or line-card.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

rcPlugOptModDdmStatusMask		1.3.6.1.4.1.2272.1.71.1.1.2
Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	ddm-ok(0), ddm-checksum-error(1), ddm-i2c-read-error(2), ddm-threshold-error(3), ddm-calibration-error(4)

rcPlugOptModCalibration		1.3.6.1.4.1.2272.1.71.1.1.3
The identifier value indicates type of calibration.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	internal(1), external(2)

rcPlugOptModPowerMeasure		1.3.6.1.4.1.2272.1.71.1.1.4
The identifier value indicates type of external power.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	omi(1), average(2)

rcPlugOptModConnectorType		1.3.6.1.4.1.2272.1.71.1.1.5
The connector type is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. This is an assigned name that indicates some characteristic of the layer-1 interface.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(17)

rcPlugOptModVendorName		1.3.6.1.4.1.2272.1.71.1.1.6
The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. The vendor name shall be the full name of the corporation, a commonly accepted abbreviation of the name, the SCSI company code, or the stock exchange code for the corporation.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(17)

rcPlugOptModVendorPartNumber		1.3.6.1.4.1.2272.1.71.1.1.7
The vendor part number is a 16 byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor part number or product name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(17)

rcPlugOptModVendorRevNumber		1.3.6.1.4.1.2272.1.71.1.1.8
The vendor revision number is a 4-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor product revision number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(5)

rcPlugOptModVendorSN		1.3.6.1.4.1.2272.1.71.1.1.9
The vendor serial number is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor serial number for the transceiver.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(17)

rcPlugOptModVendorDateCode		1.3.6.1.4.1.2272.1.71.1.1.10
The date code is an 8-byte field that contains the vendor's date code in ASCII. This field is mandatory and takes the form: YYMMDDLC where YY is the 2 low order digits of the year (00=2000), MM is the month, 01 thru 12, DD is the day, 01 thru 31, and LC is an optional vendor specific lot code.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(9)

rcPlugOptModPEC		1.3.6.1.4.1.2272.1.71.1.1.11
This is a 16 byte left-justified ASCII field that records the Nortel Product Equipment Code order number for the module. Nortel part numbers are 9 bytes long, so the 10th through 16th byte should be NULL.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(17)

rcPlugOptModCLEI		1.3.6.1.4.1.2272.1.71.1.1.12
This is a 10 byte left-justified ASCII field that records the Nortel supplied Common Language Equipment Identifier code for the device. The CLEI code is a Telcordia human-readable representation of the 1D barcode.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(11)

rcPlugOptModSupportsDDM		1.3.6.1.4.1.2272.1.71.1.1.13
This boolean indicates whether or not the device supports the DDM capability.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rcPlugOptModAux1Monitoring		1.3.6.1.4.1.2272.1.71.1.1.14
This value tells what Aux1 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature 5 Laser Wavelength 6 +5V Supply Voltage 7 +3.3V Supply Voltage 8 +1.8V Supply Voltage 9 -5.2V Supply Voltage 10 +5.0V Supply Current (unit of 100 uA) 13 +3.3V Supply Current (unit of 100 uA) 14 +1.8V Supply Current (unit of 100 uA) 15 -5.2V Supply Current (unit of 100 uA)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

rcPlugOptModAux2Monitoring		1.3.6.1.4.1.2272.1.71.1.1.15
This value tells you what AUX2 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature 5 Laser Wavelength 6 +5V Supply Voltage 7 +3.3V Supply Voltage 8 +1.8V Supply Voltage 9 -5.2V Supply Voltage 10 +5.0V Supply Current (unit of 100 uA) 13 +3.3V Supply Current (unit of 100 uA) 14 +1.8V Supply Current (unit of 100 uA) 15 -5.2V Supply Current (unit of 100 uA)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

rcPlugOptModWaveLength		1.3.6.1.4.1.2272.1.71.1.1.16
Nominal transmitter output wavelength at room temperature. It is expressed in nano-meters.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

rcPlugOptModTemperature		1.3.6.1.4.1.2272.1.71.1.1.17
This value represents the internally measured module temperature. It is expressed in units of 1/256 of a degree Celsius and can range from -40C to +125C with 0.0001 accuracy.The most significant byte is the signed integer part of the number and the least significant byte is the fraction.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTemperatureHighAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.18
This value represents the vendor specified high temperature threshold. If the device temperature exceeds this value, a temperature high is asserted. It is expressed in the same units as the measured temperature.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTemperatureLowAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.19
This value represents the vendor specified low temperature threshold. If the device temperature falls below this value, a temperature low is asserted. It is expressed in the same units as the measured temperature.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTemperatureHighWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.20
This value represents the vendor specified high temperature warning threshold. If the device temperature exceeds this value, a temperature high warning is asserted. It is expressed in the same units as the measured temperature.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTemperatureLowWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.21
This value represents the vendor specified low temperature warning threshold. If the device temperature falls below this value, a temperature low warning is asserted. It is expressed in the same units as the measured temperature.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModVoltage		1.3.6.1.4.1.2272.1.71.1.1.22
This value represents the internally measured supply voltage. It is a positive number expressed in microvolts and can range from 0 to 65535 mV.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModVoltageHighAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.23
This value represents the vendor specified high voltage threshold. If the measured voltage exceeds this value, a high voltage is asserted. It is a positive number expressed in microvolts.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModVoltageLowAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.24
This value represents the vendor specified low voltage threshold. If the measured voltage falls below this value, a low voltage is asserted. It is a positive number expressed in microvolts.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModVoltageHighWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.25
This value represents the vendor specified high voltage warning threshold. If the measured voltage exceeds this value, a high voltage warning is asserted. It is a positive number expressed in microvolts.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModVoltageLowWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.26
This value represents the vendor specified low voltage warning threshold. If the measured voltage falls below this value, a low voltage warning is asserted. It is a positive number expressed in microvolts.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModBias		1.3.6.1.4.1.2272.1.71.1.1.27
This value represents the internally measured transmitter laser bias current. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModBiasHighAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.28
This value represents the vendor specified high current threshold. If the measured bias current exceeds this value, a high current alarm is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModBiasLowAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.29
This value represents the vendor specified low current threshold. If the measured bias current falls below this value, a low current is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModBiasHighWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.30
This value represents the vendor specified high current warning threshold. If the measured bias current exceeds this value, a high current warning is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModBiasLowWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.31
This value represents the vendor specified low current warning threshold. If the measured bias current falls below this value, a low current warning is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTxPower		1.3.6.1.4.1.2272.1.71.1.1.32
This value represents the internally measured coupled TX output power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTxPowerHighAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.33
This value represents the vendor specified high transmit power threshold. If the measured transmitter power exceeds this value, a transmitter power high is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTxPowerLowAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.34
This value represents the vendor specified low transmit power threshold. If the measured transmitter power falls below this value, a transmitter power low is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTxPowerHighWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.35
This value represents the vendor specified high transmit power warning threshold. If the measured transmitter power exceeds this value, a transmitter power high warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTxPowerLowWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.36
This value represents the vendor specified low transmit power warning threshold. If the measured transmitter power falls below this value, a transmitter power low warning is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModRxPower		1.3.6.1.4.1.2272.1.71.1.1.37
This value represents the internally measured received power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModRxPowerHighAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.38
This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a receiver power high is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModRxPowerLowAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.39
This value represents the vendor specified low receiver power threshold. If the measured received power falls below this value, a receiver power low is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModRxPowerHighWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.40
This value represents the vendor specified high receiver power warning threshold. If the measured received power exceeds this value, a receiver power high warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 uW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModRxPowerLowWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.41
This value represents the vendor specified low receiver power warning threshold. If the measured received power falls below this value, a receiver power low warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux1		1.3.6.1.4.1.2272.1.71.1.1.42
This represents the internally measured A/D value specified.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux1HighAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.43
This value represents the vendor specified high Aux1 threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux1LowAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.44
This value represents the vendor specified low Aux1 threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux1HighWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.45
This value represents the vendor specified high Aux1 warning threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux1LowWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.46
This value represents the vendor specified low Aux1 warning threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux2		1.3.6.1.4.1.2272.1.71.1.1.47
This represents the internally measured A/D value specified.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux2HighAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.48
This value represents the vendor specified high Aux1 threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux2LowAlarmThreshold		1.3.6.1.4.1.2272.1.71.1.1.49
This value represents the vendor specified low Aux1 threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux2HighWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.50
This value represents the vendor specified high Aux1 warning threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModAux2LowWarningThreshold		1.3.6.1.4.1.2272.1.71.1.1.51
This value represents the vendor specified low Aux1 warning threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPlugOptModTemperatureStatus		1.3.6.1.4.1.2272.1.71.1.1.52
Used to indicate the current temperature status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), highWarning(2), highAlarm(3), lowWarning(4), lowAlarm(5)

rcPlugOptModVoltageStatus		1.3.6.1.4.1.2272.1.71.1.1.53
Used to indicate the current voltage status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), highWarning(2), highAlarm(3), lowWarning(4), lowAlarm(5)

rcPlugOptModBiasStatus		1.3.6.1.4.1.2272.1.71.1.1.54
Used to indicate the current laser bias status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), highWarning(2), highAlarm(3), lowWarning(4), lowAlarm(5)

rcPlugOptModTxPowerStatus		1.3.6.1.4.1.2272.1.71.1.1.55
Used to indicate the current transmitter power status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), highWarning(2), highAlarm(3), lowWarning(4), lowAlarm(5)

rcPlugOptModRxPowerStatus		1.3.6.1.4.1.2272.1.71.1.1.56
Used to indicate the current receiver power status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), highWarning(2), highAlarm(3), lowWarning(4), lowAlarm(5)

rcPlugOptModAux1Status		1.3.6.1.4.1.2272.1.71.1.1.57
Used to indicate the current Aux1 status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), highWarning(2), highAlarm(3), lowWarning(4), lowAlarm(5)

rcPlugOptModAux2Status		1.3.6.1.4.1.2272.1.71.1.1.58
Used to indicate the current Aux2 status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), highWarning(2), highAlarm(3), lowWarning(4), lowAlarm(5)

rcPlugOptModScalars		1.3.6.1.4.1.2272.1.71.2
OBJECT IDENTIFIER

rcPlugOptModDdmMonitor		1.3.6.1.4.1.2272.1.71.2.1
Enable/disable the global polling monitor for DDM
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue

rcPlugOptModDdmMonitorInterval		1.3.6.1.4.1.2272.1.71.2.2
Indicate the interval in which the DDM alert registers is polled
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..60

rcPlugOptModDdmTrapSend		1.3.6.1.4.1.2272.1.71.2.3
Enable/disable the global ddm trap send to SNMP manager
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue

rcPlugOptModDdmAlarmPortdown		1.3.6.1.4.1.2272.1.71.2.4
Enable/disable the global portdown option when ddm alarm occurs
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue