RC-OPM-MIB

File: RC-OPM-MIB.mib (59426 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
RAPID-CITY

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter64 IpAddress NOTIFICATION-TYPE
DisplayString TruthValue RowStatus
MacAddress InterfaceIndex rcOpm
rcVpn rcOeAdm rcTlsVpn
rcOm8k EnableValue

Defined Types

RcOpmCardConfigEntry  
SEQUENCE    
  rcOpmCardConfigSlotIndex Integer32
  rcOpmCardConfigAction INTEGER
  rcOpmCardConfigTraceMode INTEGER
  rcOpmCardConfigImageFileName DisplayString

RcOpmPortEntry  
SEQUENCE    
  rcOpmPortIndex InterfaceIndex
  rcOpmPortServiceType INTEGER
  rcOpmPortUniNum Integer32
  rcOpmPortServerEnable TruthValue
  rcOpmPortEgressCosProfileName DisplayString
  rcOpmPortEgressPolicerAdminState EnableValue

RcVpnEntry  
SEQUENCE    
  rcVpnVpnId INTEGER
  rcVpnMemberId Integer32
  rcVpnName OCTET STRING
  rcVpnPort INTEGER
  rcVpnQtagNumOrRange DisplayString
  rcVpnLocalSwitch TruthValue
  rcVpnRemotePeerId IpAddress
  rcVpnTunnelGrpId Integer32
  rcVpnOutBoundLowerBwReq INTEGER
  rcVpnOutBoundUpperBwReq INTEGER
  rcVpnServiceType INTEGER
  rcVpnServiceDegrationFactor INTEGER
  rcVpnTunnelExpPolicyType INTEGER
  rcVpnTunnelExpPolicy Integer32
  rcVpnVcGrpId INTEGER
  rcVpnVcLabel Integer32
  rcVpnTunnelLspId Integer32
  rcVpnAdminState EnableValue
  rcVpnOperState INTEGER
  rcVpnRowStatus RowStatus
  rcVpnMemAction INTEGER
  rcVpnQtagNumListSize Integer32
  rcVpnClassInteropMode INTEGER
  rcVpnAssociatedPortIfndx INTEGER

RcVpnVcGrpIdEntry  
SEQUENCE    
  rcVpnVcGrpIdIndex INTEGER
  rcVpnVcGrpIdAdminStatus EnableValue
  rcVpnVcGrpIdListSize Integer32
  rcVpnVcGrpIdList OCTET STRING

RcVpnStatisticsEntry  
SEQUENCE    
  rcVpnStatisticsVpnId Integer32
  rcVpnStatisticsAccessPacketCount Counter64
  rcVpnStatisticsAccessOctetCount Counter64
  rcVpnStatisticsAccessDroppedBIR Counter64
  rcVpnStatisticsAccessDroppedCIR Counter64
  rcVpnStatisticsTrunkPacketCount Counter64
  rcVpnStatisticsTrunkOctetCount Counter64
  rcVpnStatisticsTrunkErrorTTL Counter64
  rcVpnStatisticsTrunkErrorMTU Counter64
  rcVpnStatisticsAccessDroppedPIR Counter64

RcVpnPortEntry  
SEQUENCE    
  rcVpnPortIndex Integer32
  rcVpnPortServiceType INTEGER
  rcVpnPortMode INTEGER

RcOeAdmStatisticsEntry  
SEQUENCE    
  rcOeAdmStatsPortIndex Integer32
  rcOeAdmStatsUnSupportedVersion Counter64
  rcOeAdmStatsUnSupportedTlvType Counter64
  rcOeAdmStatsBadMsgLength Counter64
  rcOeAdmStatsBadTlvLength Counter64
  rcOeAdmStatsBadMsgType Counter64

RcOeAdmConnStatisticsEntry  
SEQUENCE    
  rcOeAdmConnStatsUniId IpAddress
  rcOeAdmConnStatsTimerZTimeout Counter64
  rcOeAdmConnStatsHellos Counter64

RcTlsVpnConfigEntry  
SEQUENCE    
  rcTlsVpnConfigVpnId INTEGER
  rcTlsVpnConfigTdi INTEGER
  rcTlsVpnConfigName OCTET STRING
  rcTlsVpnConfigMode INTEGER
  rcTlsVpnConfigRowStatus RowStatus

RcTlsVpnRemotePeerEntry  
SEQUENCE    
  rcTlsVpnRemotePeerVpnId INTEGER
  rcTlsVpnRemotePeerRemotePeerId IpAddress
  rcTlsVpnRemotePeerTunnelGrpId INTEGER
  rcTlsVpnRemotePeerRowStatus RowStatus
  rcTlsVpnRemotePeerTunnelId INTEGER
  rcTlsVpnRemotePeerTunnelType DisplayString
  rcTlsVpnRemotePeerLdpFec IpAddress

RcTlsVpnEntry  
SEQUENCE    
  rcTlsVpnVpnId Integer32
  rcTlsVpnMemberId IpAddress
  rcTlsVpnRemotePeerId IpAddress
  rcTlsVpnName OCTET STRING
  rcTlsVpnTdi Integer32
  rcTlsVpnMode INTEGER
  rcTlsVpnMemberType INTEGER
  rcTlsVpnUniPortListSize Integer32
  rcTlsVpnUniPortList OCTET STRING
  rcTlsVpnUniMac MacAddress
  rcTlsVpnTunnelGrpId Integer32
  rcTlsVpnVcGrpId INTEGER
  rcTlsVpnVcLabel Integer32
  rcTlsVpnTunnelLspId Integer32
  rcTlsVpnAdminState EnableValue
  rcTlsVpnOperState INTEGER
  rcTlsVpnTlsFlags Integer32
  rcTlsVpnRowStatus RowStatus

RcTlsVpnAccessStatisticsEntry  
SEQUENCE    
  rcTlsVpnAccessStatisticsTdi Integer32
  rcTlsVpnAccessStatisticsPort Integer32
  rcTlsVpnAccessStatisticsUcastPacketCount Counter64
  rcTlsVpnAccessStatisticsUcastOctetCount Counter64
  rcTlsVpnAccessStatisticsMcastPacketCount Counter64
  rcTlsVpnAccessStatisticsMcastOctetCount Counter64
  rcTlsVpnAccessStatisticsClear TruthValue

RcTlsVpnTrunkStatisticsEntry  
SEQUENCE    
  rcTlsVpnTrunkStatisticsTdi Integer32
  rcTlsVpnTrunkStatisticsPort Integer32
  rcTlsVpnTrunkStatisticsUcastPacketCount Counter64
  rcTlsVpnTrunkStatisticsUcastOctetCount Counter64
  rcTlsVpnTrunkStatisticsMcastPacketCount Counter64
  rcTlsVpnTrunkStatisticsMcastOctetCount Counter64
  rcTlsVpnTrunkStatisticsClear TruthValue

Defined Values

rcOpmMib 1.3.6.1.4.1.2272.1.36.0
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY    

rcOpmCardConfigTable 1.3.6.1.4.1.2272.1.36.1
Opm Card Config Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcOpmCardConfigEntry

rcOpmCardConfigEntry 1.3.6.1.4.1.2272.1.36.1.1
Entry containing infomation of OPM Card Config.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcOpmCardConfigEntry  

rcOpmCardConfigSlotIndex 1.3.6.1.4.1.2272.1.36.1.1.1
slot Index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcOpmCardConfigAction 1.3.6.1.4.1.2272.1.36.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(0), reset(1)  

rcOpmCardConfigTraceMode 1.3.6.1.4.1.2272.1.36.1.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(0), traceOn(1)  

rcOpmCardConfigImageFileName 1.3.6.1.4.1.2272.1.36.1.1.4
OPM Image file name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcOpmPortTable 1.3.6.1.4.1.2272.1.36.2
Opm Port table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcOpmPortEntry

rcOpmPortEntry 1.3.6.1.4.1.2272.1.36.2.1
Entry containing info. for a particular opm port
Status: current Access: not-accessible
OBJECT-TYPE    
  RcOpmPortEntry  

rcOpmPortIndex 1.3.6.1.4.1.2272.1.36.2.1.1
An index value that uniquely identifies a opm port. This value is similar to ifIndex in MIB2.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

rcOpmPortServiceType 1.3.6.1.4.1.2272.1.36.2.1.2
Opm Port service type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rbsRingPrimary(1), rbsRingSecondary(2), standaloneRbs(3), localTlsTransparent(4), localTlsSwitched(5), localIpmcUni(6), localIpmcBi(7), localQnq1(8), localQnq2(9), server(10), unknown(11), multiService(12)  

rcOpmPortUniNum 1.3.6.1.4.1.2272.1.36.2.1.3
Number of UNI this port belongs to
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcOpmPortServerEnable 1.3.6.1.4.1.2272.1.36.2.1.4
Value indicating whether the OPM port set as a server port
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcOpmPortEgressCosProfileName 1.3.6.1.4.1.2272.1.36.2.1.5
Egress COS Profile Table Name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

rcOpmPortEgressPolicerAdminState 1.3.6.1.4.1.2272.1.36.2.1.6
Enable/disable to use Egress Cos Profile table
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcVpnTable 1.3.6.1.4.1.2272.1.37.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcVpnEntry

rcVpnEntry 1.3.6.1.4.1.2272.1.37.1.1
A Vpn table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcVpnEntry  

rcVpnVpnId 1.3.6.1.4.1.2272.1.37.1.1.1
Vpn identifier. For the Martini L2s this is the VCId. Distributed in the VFEC to the remote peer (other end point of ).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

rcVpnMemberId 1.3.6.1.4.1.2272.1.37.1.1.2
This field along with the Id identifies an end point of a Virtural circuit. In the martini point-to-point this is PortID, where as in any2any this is UNI ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcVpnName 1.3.6.1.4.1.2272.1.37.1.1.3
For ease of configuration. Can provide either during the configuration or modification of this field is allowed on when the admin state is disabled. Not supoorted in this release.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

rcVpnPort 1.3.6.1.4.1.2272.1.37.1.1.4
Providing member.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcVpnQtagNumOrRange 1.3.6.1.4.1.2272.1.37.1.1.5
List of qtags or range of qtags for this port. ( member)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcVpnLocalSwitch 1.3.6.1.4.1.2272.1.37.1.1.6
indicate the local switch.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcVpnRemotePeerId 1.3.6.1.4.1.2272.1.37.1.1.7
Remote LER IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcVpnTunnelGrpId 1.3.6.1.4.1.2272.1.37.1.1.8
Tunnel group for this to reach remote LER.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcVpnOutBoundLowerBwReq 1.3.6.1.4.1.2272.1.37.1.1.9
This is part of required parameter to enable the admin status. Specifies the lower guaranteed bandwidth in Mbps.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1000  

rcVpnOutBoundUpperBwReq 1.3.6.1.4.1.2272.1.37.1.1.10
This is part of required parameter to enable the admin status. Specifies the upper bandwidth in Mbps. Interpretation of this is based on the ServicType.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1000  

rcVpnServiceType 1.3.6.1.4.1.2272.1.37.1.1.11
Type of service offered for the .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER serviceA(1), serviceB(2), serviceC(3)  

rcVpnServiceDegrationFactor 1.3.6.1.4.1.2272.1.37.1.1.12
This value indicates the service degradation factor (percent) either in the case of LSP failure or when bandwidth requirement changes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rcVpnTunnelExpPolicyType 1.3.6.1.4.1.2272.1.37.1.1.13
This indicates how the Tunnel EXP bits will be defined. Value of this field specify the interpretation of TunnelExpPolicy value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER explicit(1), implicit(2)  

rcVpnTunnelExpPolicy 1.3.6.1.4.1.2272.1.37.1.1.14
The usage of this field is signaled by TunnelExpPolicyType. If the type is set to Explicit then the value specified is the EXP bit value. Otherwise the index for the mapping policy entry in the TunnelExpPolicyTable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcVpnVcGrpId 1.3.6.1.4.1.2272.1.37.1.1.15
Configuration of VcGroupId has local Significance. it is sent in the VFEC. Used for sending the wildcard withdraw message to all the LDP neighbors. One application is sending the withdraw message in the event of the interface is going down.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcVpnVcLabel 1.3.6.1.4.1.2272.1.37.1.1.16
This will be updated upon receiving the VFEC from the remote peer. It is 20 bits long
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcVpnTunnelLspId 1.3.6.1.4.1.2272.1.37.1.1.17
Will be updated when Vpn Controller determines which Lsp it is using for the Vpn (based on the bw requirements). This will be updated upon detecting the existence of tunnel to the remote peer. This occurs while sending the VFEC. Receving the VFEC does not guarantee the existence of tunnel going from this switch to the other end.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcVpnAdminState 1.3.6.1.4.1.2272.1.37.1.1.18
Use for configuration. Enable operation is allowed only if the configuration of this entry contains tunnel-group association, memeber information and SLA attributes. Disable value indicates that the configuration exists but is not yet enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcVpnOperState 1.3.6.1.4.1.2272.1.37.1.1.19
Change of state occurs upon establishing the label mapping i.e., sending the VFEC and receiving the VFEC or changes in Tunnel existence or LDP session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), waitLdpSess(2), waitLsp(3), waitPeerLbl(4), operational(5)  

rcVpnRowStatus 1.3.6.1.4.1.2272.1.37.1.1.20
uses for controlling the creation and deletion of this row
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcVpnMemAction 1.3.6.1.4.1.2272.1.37.1.1.21
Add/Remove member from VPN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), add(1), remove(2)  

rcVpnQtagNumListSize 1.3.6.1.4.1.2272.1.37.1.1.22
The Size of qtags or range of qtags for this port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcVpnClassInteropMode 1.3.6.1.4.1.2272.1.37.1.1.23
Interoperability mode for a service class attached to an L2-VPN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER standard(1), juniper(2)  

rcVpnAssociatedPortIfndx 1.3.6.1.4.1.2272.1.37.1.1.24
Extended Legacy port or MLTport member.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcVpnVcGrpIdTable 1.3.6.1.4.1.2272.1.37.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcVpnVcGrpIdEntry

rcVpnVcGrpIdEntry 1.3.6.1.4.1.2272.1.37.2.1
A VcGrpId table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcVpnVcGrpIdEntry  

rcVpnVcGrpIdIndex 1.3.6.1.4.1.2272.1.37.2.1.1
VC Grp Identifier. In the VPN configuration this value is used to tie the VPN to the VcGrp.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

rcVpnVcGrpIdAdminStatus 1.3.6.1.4.1.2272.1.37.2.1.2
use for configuration.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcVpnVcGrpIdListSize 1.3.6.1.4.1.2272.1.37.2.1.3
Used to indicate the number of VPNs that are associated with this VcGrpId.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcVpnVcGrpIdList 1.3.6.1.4.1.2272.1.37.2.1.4
Used to indicate the list of VPNs that are assiciated with this VcGrpId.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(256)  

rcVpnStatisticsTable 1.3.6.1.4.1.2272.1.37.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcVpnStatisticsEntry

rcVpnStatisticsEntry 1.3.6.1.4.1.2272.1.37.3.1
A Statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcVpnStatisticsEntry  

rcVpnStatisticsVpnId 1.3.6.1.4.1.2272.1.37.3.1.1
Vpn identifier. For the Martini L2VPNs this is the VCId.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcVpnStatisticsAccessPacketCount 1.3.6.1.4.1.2272.1.37.3.1.2
Used to indicate the number of packets received at the access port for this VPN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcVpnStatisticsAccessOctetCount 1.3.6.1.4.1.2272.1.37.3.1.3
Used to indicate the number of octets received at the access port for this VPN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcVpnStatisticsAccessDroppedBIR 1.3.6.1.4.1.2272.1.37.3.1.4
Used to indicate the number of packets dropped due to BIR
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

rcVpnStatisticsAccessDroppedCIR 1.3.6.1.4.1.2272.1.37.3.1.5
Used to indicate the number of packets dropped due to CIR
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcVpnStatisticsTrunkPacketCount 1.3.6.1.4.1.2272.1.37.3.1.6
Used to indicate the number of packets received at the trunk port for this VPN label.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcVpnStatisticsTrunkOctetCount 1.3.6.1.4.1.2272.1.37.3.1.7
Used to indicate the number of octets received at the trunk port for this VPN label.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcVpnStatisticsTrunkErrorTTL 1.3.6.1.4.1.2272.1.37.3.1.8
Used to indicate the TTL error count for this VPN label.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcVpnStatisticsTrunkErrorMTU 1.3.6.1.4.1.2272.1.37.3.1.9
Used to indicate the MTU error count for this VPN label.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcVpnStatisticsAccessDroppedPIR 1.3.6.1.4.1.2272.1.37.3.1.10
Used to indicate the number of packets dropped due to PIR
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcVpnPortTable 1.3.6.1.4.1.2272.1.37.4
vpn port table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcVpnPortEntry

rcVpnPortEntry 1.3.6.1.4.1.2272.1.37.4.1
Entry containing info. for a particular port
Status: current Access: not-accessible
OBJECT-TYPE    
  RcVpnPortEntry  

rcVpnPortIndex 1.3.6.1.4.1.2272.1.37.4.1.1
An unique index used to identify a particular port in the system. this index is equal to the ifIndex of the port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcVpnPortServiceType 1.3.6.1.4.1.2272.1.37.4.1.2
Indicates the port functionality. 12uni is used to configure the port to be part of Martini service, tls is used to configure the port to be part of Any2Any VPN service and ip is used to perform the IP routing and mpls if enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), l2uni(1), vpls(2), ip(3), serverl2uni(4)  

rcVpnPortMode 1.3.6.1.4.1.2272.1.37.4.1.3
The octapid id of the mirrored port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), transparent(1), switched(2)  

rcOeAdmPECoreObjects 1.3.6.1.4.1.2272.1.38.1
OBJECT IDENTIFIER    

rcOeAdmPECoreKeepAliveInterval 1.3.6.1.4.1.2272.1.38.1.1
The time interval in minutes after which, if no Hello messages have been received for a UNI, the VPN membership for the UNI will be cleared.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 3..10000  

rcOeAdmPECoreTLSEnabled 1.3.6.1.4.1.2272.1.38.1.2
Boolean value indicating whether the TLS service is enabled on a PE-Core device.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcOeAdmPECoreUDPPort 1.3.6.1.4.1.2272.1.38.1.3
The UDP port to which ADM Hello messages will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

rcOeAdmStatisticsTable 1.3.6.1.4.1.2272.1.38.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcOeAdmStatisticsEntry

rcOeAdmStatisticsEntry 1.3.6.1.4.1.2272.1.38.2.1
A Statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcOeAdmStatisticsEntry  

rcOeAdmStatsPortIndex 1.3.6.1.4.1.2272.1.38.2.1.1
Port interface Index .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcOeAdmStatsUnSupportedVersion 1.3.6.1.4.1.2272.1.38.2.1.2
Used to indicate the number of Hellos received with Bad OE-ADM protocol version number .
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcOeAdmStatsUnSupportedTlvType 1.3.6.1.4.1.2272.1.38.2.1.3
Used to indicate the number of Hellos received with bad TLV types.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcOeAdmStatsBadMsgLength 1.3.6.1.4.1.2272.1.38.2.1.4
Used to indicate the number of Hellos received with bad Hello message length .
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcOeAdmStatsBadTlvLength 1.3.6.1.4.1.2272.1.38.2.1.5
Used to indicate the number of Hellos received with Bad TLV Length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcOeAdmStatsBadMsgType 1.3.6.1.4.1.2272.1.38.2.1.6
Used to indicate the number of Hellos received with Bad Hello message Length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcOeAdmConnStatisticsTable 1.3.6.1.4.1.2272.1.38.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcOeAdmConnStatisticsEntry

rcOeAdmConnStatisticsEntry 1.3.6.1.4.1.2272.1.38.3.1
A Statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcOeAdmConnStatisticsEntry  

rcOeAdmConnStatsUniId 1.3.6.1.4.1.2272.1.38.3.1.1
This field identifies the UNI-ID for the PE-Edge device.It represents the customer site ID.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcOeAdmConnStatsTimerZTimeout 1.3.6.1.4.1.2272.1.38.3.1.2
This counter indicates total number of 'Z' Timer timetouts.This is an indication of the possible physical link disconnect between PE-Edge device and a PE-Core device.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcOeAdmConnStatsHellos 1.3.6.1.4.1.2272.1.38.3.1.3
This counter indicates total number of Hello PDUs received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcOeAdmPEEdgeObjects 1.3.6.1.4.1.2272.1.38.4
OBJECT IDENTIFIER    

rcOeAdmPEEdgeUDPPort 1.3.6.1.4.1.2272.1.38.4.1
The UDP port to which ADM Hello messages will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcOeAdmPEEdgeNumHelloMessages 1.3.6.1.4.1.2272.1.38.4.2
The number of Hello messages that will be generated when a UNI/TDI association is changed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

rcOeAdmPEEdgeHelloMessageInterval 1.3.6.1.4.1.2272.1.38.4.3
The time interval between Hello messages that are generated when a UNI/TDI association is changed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1000  

rcOeAdmPEEdgeKeepAliveInterval 1.3.6.1.4.1.2272.1.38.4.4
The time interval between generation of keep-alive Hello messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1000  

rcOeAdmPEEdgeProtocolEnabled 1.3.6.1.4.1.2272.1.38.4.5
Boolean value indicating whether the ADM protocol is enabled on a PE-Edge device.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcOeAdmPEEdgeHeartbeatInterval 1.3.6.1.4.1.2272.1.38.4.6
The interval with which Heartbeat messages are generated, measured in 10ths of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcOeAdmPEEdgeOutgoingInterface 1.3.6.1.4.1.2272.1.38.4.7
The outgoing interfaces from which the ADM messages are sent out. The format of the string contains one or more interfaces, each interface is represented in the octet string as 4 octets, each four octets is the IpAddress of the interface configured on the box. Now the maximum interfaces can be configured is four
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(16)  

rcOeAdmPEEdgeSecOutgoingInterface 1.3.6.1.4.1.2272.1.38.4.8
The secondary outgoing interfaces from which the ADM messages are sent out. Only used if ADM is in dual-homed mode
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(16)  

rcOeAdmPEEdgeDhPrimaryPort 1.3.6.1.4.1.2272.1.38.4.9
BAN dual-homed primaray port number. Only used if ADM is in dual-homed mode
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rcOeAdmPEEdgeDhSecondaryPort 1.3.6.1.4.1.2272.1.38.4.10
BAN dual-homed secondary port number. Only used if ADM is in dual-homed mode
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rcOeAdmPEEdgeMode 1.3.6.1.4.1.2272.1.38.4.11
Mode: 1 is normal mode, 2 is dual-homed mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), dual-homed(2)  

rcTlsVpnConfigTable 1.3.6.1.4.1.2272.1.39.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcTlsVpnConfigEntry

rcTlsVpnConfigEntry 1.3.6.1.4.1.2272.1.39.1.1
A TlsVpn config table entry. This table is used for configuring TLS VPN.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcTlsVpnConfigEntry  

rcTlsVpnConfigVpnId 1.3.6.1.4.1.2272.1.39.1.1.1
Vpn identifier. For the TLS VPN this is the VCId. Distributed in the TFEC to the remote peer (other end point of ).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

rcTlsVpnConfigTdi 1.3.6.1.4.1.2272.1.39.1.1.2
Transparent domain identifier for TLS.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 100..65535  

rcTlsVpnConfigName 1.3.6.1.4.1.2272.1.39.1.1.3
For ease of configuration. Can provide either during the configuration or modification of this field is allowed on when the admin state is disabled. Not supoorted in this release.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

rcTlsVpnConfigMode 1.3.6.1.4.1.2272.1.39.1.1.4
The transmission mode for interworking with Hornet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER transparent(1), mapped(2)  

rcTlsVpnConfigRowStatus 1.3.6.1.4.1.2272.1.39.1.1.5
Used for controlling the creation and deletion of this row
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcTlsVpnRemotePeerTable 1.3.6.1.4.1.2272.1.39.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcTlsVpnRemotePeerEntry

rcTlsVpnRemotePeerEntry 1.3.6.1.4.1.2272.1.39.2.1
A TlsVpn remote peer table entry. This table is used for configuring TLS VPN remote peers.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcTlsVpnRemotePeerEntry  

rcTlsVpnRemotePeerVpnId 1.3.6.1.4.1.2272.1.39.2.1.1
Vpn identifier. For the TLS VPN this is the VCId. Distributed in the TFEC to the remote peer (other end point of ).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

rcTlsVpnRemotePeerRemotePeerId 1.3.6.1.4.1.2272.1.39.2.1.2
Remote LER IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcTlsVpnRemotePeerTunnelGrpId 1.3.6.1.4.1.2272.1.39.2.1.3
Tunnel group to reach remote LER.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcTlsVpnRemotePeerRowStatus 1.3.6.1.4.1.2272.1.39.2.1.4
Used for controlling the creation and deletion of this row
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcTlsVpnRemotePeerTunnelId 1.3.6.1.4.1.2272.1.39.2.1.5
Tunnel in the Tunnel group to be used to reach remote LER.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

rcTlsVpnRemotePeerTunnelType 1.3.6.1.4.1.2272.1.39.2.1.6
Type of the Tunnel in the Tunnel group to be used to reach remote LER. Includes primary and backup tunnel
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

rcTlsVpnRemotePeerLdpFec 1.3.6.1.4.1.2272.1.39.2.1.7
LDP FEC to be used to reach remote LER.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcTlsVpnTable 1.3.6.1.4.1.2272.1.39.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcTlsVpnEntry

rcTlsVpnEntry 1.3.6.1.4.1.2272.1.39.3.1
A TlsVpn table entry. This table is used for displaying all the TLS VPN members. When displaying, the number of table entries could be more than configured entry number due to dynamically added TLS VPN members.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcTlsVpnEntry  

rcTlsVpnVpnId 1.3.6.1.4.1.2272.1.39.3.1.1
Vpn identifier. For the TLS VPN this is the VCId. Distributed in the TFEC to the remote peer (other end point of ).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcTlsVpnMemberId 1.3.6.1.4.1.2272.1.39.3.1.2
This field along with the Id identifies an end point of a Virtural circuit. In TLS VPN, this is UNI ID. For creating the TLS VPN, Tdi must be configured and this memberId value is (0xea000000|Tdi).
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcTlsVpnRemotePeerId 1.3.6.1.4.1.2272.1.39.3.1.3
Remote LER IP address. 0.0.0.1 representing the local peer.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcTlsVpnName 1.3.6.1.4.1.2272.1.39.3.1.4
For ease of configuration. Can provide either during the configuration or modification of this field is allowed on when the admin state is disabled. Not supoorted in this release.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

rcTlsVpnTdi 1.3.6.1.4.1.2272.1.39.3.1.5
Transparent domain identifier for TLS.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcTlsVpnMode 1.3.6.1.4.1.2272.1.39.3.1.6
The transmission mode for interworking with Hornet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER transparent(1), mapped(2)  

rcTlsVpnMemberType 1.3.6.1.4.1.2272.1.39.3.1.7
UNI type of the TLS VPN entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER multicast(0), localUnicast(1), remoteUnicast(2)  

rcTlsVpnUniPortListSize 1.3.6.1.4.1.2272.1.39.3.1.8
Size of the incoming (or member) Port list. Valid only for multicast member type.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcTlsVpnUniPortList 1.3.6.1.4.1.2272.1.39.3.1.9
The list of incoming (or member) ports. Valid only for multicast member type.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(256)  

rcTlsVpnUniMac 1.3.6.1.4.1.2272.1.39.3.1.10
UNI MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcTlsVpnTunnelGrpId 1.3.6.1.4.1.2272.1.39.3.1.11
Tunnel group to reach remote LER.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcTlsVpnVcGrpId 1.3.6.1.4.1.2272.1.39.3.1.12
Is generated per UNI. Used for sending the wildcard withdraw message to all the LDP neighbors. One application is sending the withdraw message in the event of the UNI interface is going down.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

rcTlsVpnVcLabel 1.3.6.1.4.1.2272.1.39.3.1.13
This is the vc label either allocated locally in the case of local peer, or received from the remote peer. It is 20 bits long
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcTlsVpnTunnelLspId 1.3.6.1.4.1.2272.1.39.3.1.14
Will be updated when Vpn Controller determines which Lsp it is using for the Vpn (based on the bw requirements). This will be updated upon detecting the existence of tunnel to the remote peer. This occurs while sending the TFEC. Receving the TFEC does not guarantee the existence of tunnel going from this switch to the other end.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcTlsVpnAdminState 1.3.6.1.4.1.2272.1.39.3.1.15
Not used by TLS yet.
Status: current Access: read-only
OBJECT-TYPE    
  EnableValue  

rcTlsVpnOperState 1.3.6.1.4.1.2272.1.39.3.1.16
Change of state occurs upon establishing the label mapping i.e., sending the TFEC and receiving the TFEC or changes in Tunnel existence or LDP session. For local peer, i.e., remotePeerId = 0.0.0.1, only inactive and operational states are valid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), waitLdpSess(2), waitLsp(3), waitPeerLbl(4), operational(5)  

rcTlsVpnTlsFlags 1.3.6.1.4.1.2272.1.39.3.1.17
TLS UNI flags.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcTlsVpnRowStatus 1.3.6.1.4.1.2272.1.39.3.1.18
Used for controlling the creation and deletion of this row
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcTlsVpnAccessStatisticsTable 1.3.6.1.4.1.2272.1.39.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcTlsVpnAccessStatisticsEntry

rcTlsVpnAccessStatisticsEntry 1.3.6.1.4.1.2272.1.39.4.1
TLS VPN Access Statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcTlsVpnAccessStatisticsEntry  

rcTlsVpnAccessStatisticsTdi 1.3.6.1.4.1.2272.1.39.4.1.1
TDI identifier. This uniquely identifies the VPN-ID. i.e. VPN-ID and TDI have a one-to-one association.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcTlsVpnAccessStatisticsPort 1.3.6.1.4.1.2272.1.39.4.1.2
Access Port identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcTlsVpnAccessStatisticsUcastPacketCount 1.3.6.1.4.1.2272.1.39.4.1.3
Used to collect the number of Unicast packets received on this access port for this TDI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcTlsVpnAccessStatisticsUcastOctetCount 1.3.6.1.4.1.2272.1.39.4.1.4
Used to collect the number of Unicast octets received on this access port for this TDI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcTlsVpnAccessStatisticsMcastPacketCount 1.3.6.1.4.1.2272.1.39.4.1.5
Used to collect the number of Multicast packets received on this access port for this TDI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcTlsVpnAccessStatisticsMcastOctetCount 1.3.6.1.4.1.2272.1.39.4.1.6
Used to collect the number of Multicast octets received on this access port for this TDI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcTlsVpnAccessStatisticsClear 1.3.6.1.4.1.2272.1.39.4.1.7
Used to clear statistics for TDI and Port
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcTlsVpnTrunkStatisticsTable 1.3.6.1.4.1.2272.1.39.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcTlsVpnTrunkStatisticsEntry

rcTlsVpnTrunkStatisticsEntry 1.3.6.1.4.1.2272.1.39.5.1
TLS VPN Trunk Statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcTlsVpnTrunkStatisticsEntry  

rcTlsVpnTrunkStatisticsTdi 1.3.6.1.4.1.2272.1.39.5.1.1
TDI identifier. This uniquely identifies the VPN-ID. i.e. VPN-ID and TDI have a one-to-one association.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcTlsVpnTrunkStatisticsPort 1.3.6.1.4.1.2272.1.39.5.1.2
Trunk Port identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcTlsVpnTrunkStatisticsUcastPacketCount 1.3.6.1.4.1.2272.1.39.5.1.3
Used to collect the number of Unicast packets received on this trunk port for this TDI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcTlsVpnTrunkStatisticsUcastOctetCount 1.3.6.1.4.1.2272.1.39.5.1.4
Used to collect the number of Unicast octets received on this trunk port for this TDI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcTlsVpnTrunkStatisticsMcastPacketCount 1.3.6.1.4.1.2272.1.39.5.1.5
Used to collect the number of Multicast packets received on this trunk port for this TDI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcTlsVpnTrunkStatisticsMcastOctetCount 1.3.6.1.4.1.2272.1.39.5.1.6
Used to collect the number of Multicast octets received on this trunk port for this TDI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcTlsVpnTrunkStatisticsClear 1.3.6.1.4.1.2272.1.39.5.1.7
Used to clear statistics for TDI and Port
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcTlsVpnGlobal 1.3.6.1.4.1.2272.1.39.6
OBJECT IDENTIFIER    

rcTlsVpnGlobalClearAllAccessStats 1.3.6.1.4.1.2272.1.39.6.1
Clear All TLS VPN Access Statistics.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcTlsVpnGlobalClearAllTrunkStats 1.3.6.1.4.1.2272.1.39.6.2
Clear All TLS VPN Trunk Statistics.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcOm8kTraps 1.3.6.1.4.1.2272.1.200.1
OBJECT IDENTIFIER    

rcTlsTunnelChangeTrap 1.3.6.1.4.1.2272.1.200.1.1
Whenevev there is any change in the tunnel selected by the TLS VPN, a trap will be sent. The trap will indicate the vpnId, remotePeerId, oldTunnelId, newTunnelId, oldTunnelType and newTunnelType.
Status: current Access: read-write
NOTIFICATION-TYPE    

rcTlsBackupTunnelSelectedTrap 1.3.6.1.4.1.2272.1.200.1.2
When a backup tunnel is selected, a trap will be sent. The trap will indicate the vpnId, remotePeerId, and the TunnelId of the backup tunnel
Status: current Access: read-write
NOTIFICATION-TYPE