RC-MLT-MIB

File: RC-MLT-MIB.mib (73106 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
RAPID-CITY

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Gauge32 Counter32 Counter64
IpAddress TimeTicks DisplayString
TruthValue RowStatus MacAddress
InterfaceIndex InterfaceIndexOrZero rcMlt
rcStat rcLinkFlapDetect rcL2Redundancy
PortSet IdList EnableValue

Defined Types

RcStatMltIfExtnEntry  
SEQUENCE    
  rcStatMltIfExtnMltId Integer32
  rcStatMltIfExtnIfInMulticastPkts Counter32
  rcStatMltIfExtnIfInBroadcastPkts Counter32
  rcStatMltIfExtnIfOutMulticastPkts Counter32
  rcStatMltIfExtnIfOutBroadcastPkts Counter32
  rcStatMltIfExtnIfHCInOctets Counter64
  rcStatMltIfExtnIfHCInUcastPkts Counter64
  rcStatMltIfExtnIfHCInMulticastPkt Counter64
  rcStatMltIfExtnIfHCInBroadcastPkt Counter64
  rcStatMltIfExtnIfHCOutOctets Counter64
  rcStatMltIfExtnIfHCOutUcastPkts Counter64
  rcStatMltIfExtnIfHCOutMulticast Counter64
  rcStatMltIfExtnIfHCOutBroadcast Counter64

RcStatMltEtherEntry  
SEQUENCE    
  rcStatMltEtherMltId Integer32
  rcStatMltEtherAlignmentErrors Counter32
  rcStatMltEtherFCSErrors Counter32
  rcStatMltEtherSingleCollFrames Counter32
  rcStatMltEtherMultipleCollFrames Counter32
  rcStatMltEtherSQETestError Counter32
  rcStatMltEtherDeferredTransmiss Counter32
  rcStatMltEtherLateCollisions Counter32
  rcStatMltEtherExcessiveCollis Counter32
  rcStatMltEtherIMacTransmitError Counter32
  rcStatMltEtherCarrierSenseError Counter32
  rcStatMltEtherFrameTooLong Counter32
  rcStatMltEtherIMacReceiveError Counter32

RcStatMltIpEntry  
SEQUENCE    
  rcStatMltIpMltId Integer32
  rcStatMltIpInReceives Counter32
  rcStatMltIpInHdrErrors Counter32
  rcStatMltIpInAddrErrors Counter32
  rcStatMltIpForwDatagrams Counter32
  rcStatMltIpInUnknownProtos Counter32
  rcStatMltIpInDiscards Counter32
  rcStatMltIpInDelivers Counter32
  rcStatMltIpOutRequest Counter32
  rcStatMltIpOutDiscards Counter32
  rcStatMltIpOutNoRoutes Counter32
  rcStatMltIpReasmReqds Counter32
  rcStatMltIpReasmOKs Counter32
  rcStatMltIpReasmFails Counter32
  rcStatMltIpFragOKs Counter32
  rcStatMltIpFragFails Counter32
  rcStatMltIpFragCreates Counter32
  rcStatMltIpRoutingDiscards Counter32

RcStatMltIfUtilEntry  
SEQUENCE    
  rcStatMltIfUtilMltId Integer32
  rcStatMltIfUtilIfHCInOctets Counter64
  rcStatMltIfUtilIfHCInUtil Gauge32
  rcStatMltIfUtilIfHCOutOctets Counter64
  rcStatMltIfUtilIfHCOutUtil Gauge32

RcStatMltUtilEntry  
SEQUENCE    
  rcStatMltUtilPortIfIndex InterfaceIndex
  rcStatMltUtilTrafficType INTEGER
  rcStatMltUtilTrafficLast5Min Gauge32
  rcStatMltUtilTrafficLast30Min Gauge32
  rcStatMltUtilTrafficLast1Hour Gauge32

RcMltEntry  
SEQUENCE    
  rcMltId Integer32
  rcMltName DisplayString
  rcMltPortMembers PortSet
  rcMltPortType INTEGER
  rcMltNumVlanIds Integer32
  rcMltVlanIds IdList
  rcMltRowStatus RowStatus
  rcMltEnable TruthValue
  rcMltLoadBalance TruthValue
  rcMltDistributionAlgorithm INTEGER
  rcMltIfIndex InterfaceIndexOrZero
  rcMltMltType INTEGER
  rcMltSmltId Integer32
  rcMltRunningType INTEGER
  rcMltSvlanPortType INTEGER
  rcMltMulticastDistribution EnableValue
  rcMltLacp10gBackup EnableValue
  rcMltAggregatable EnableValue
  rcMltClearLinkAggregate INTEGER
  rcMltNtStgEnable TruthValue
  rcMltDesignatedPort InterfaceIndex
  rcMltAggOperState EnableValue
  rcMltAggTimeOfLastOperChange TimeTicks
  rcMltVplsMgmtVlan EnableValue
  rcMltLoadDistributionOption INTEGER
  rcMltUniAggrMacIdx Integer32
  rcMltUniAggrMacAddress MacAddress
  rcMltQinqEtherType Integer32
  rcMltEgressCosProfileName DisplayString
  rcMltEgressPolicerAdminState EnableValue
  rcMltAggrEgressBandwidth EnableValue
  rcMltAggrIngressBandwidth EnableValue
  rcMltAggrMacAlloc EnableValue
  rcMltAggMinLink Integer32
  rcMltMtu Integer32
  rcMltInterfaceType INTEGER
  rcMltConfiguredMembers PortSet
  rcMltMtuAdminState EnableValue
  rcMltPeerPortMembers PortSet
  rcMltCpLimitPktRate Integer32
  rcMltCpLimitShutDownEnable TruthValue
  rcMltVlanIdList OCTET STRING
  rcMltEntryOwner INTEGER
  rcMltDatapathProgrammingState INTEGER

RcSltPortEntry  
SEQUENCE    
  rcSltPortIfIndex InterfaceIndex
  rcSltPortSmltId Integer32
  rcSltPortOperType INTEGER
  rcSltPortRowStatus RowStatus

RcMltVlacpEntry  
SEQUENCE    
  rcMltVlacpAdminEnable TruthValue
  rcMltVlacpFastPeriodicTimer Integer32
  rcMltVlacpTimeoutScale Integer32
  rcMltVlacpEtherMacAddress MacAddress
  rcMltVlacpDualHomingEnable TruthValue

RcMltBvidPortEntry  
SEQUENCE    
  rcMltBvidMltId Integer32
  rcMltBvidVlanId Integer32
  rcMltBvidPrimaryPort InterfaceIndex
  rcMltBvidSecondaryPort InterfaceIndex
  rcMltBvidRowStatus RowStatus

Defined Values

rcMltMib 1.3.6.1.4.1.2272.1.17.0
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY    

rcStatMlt 1.3.6.1.4.1.2272.1.12.6
OBJECT IDENTIFIER    

rcStatMltIfExtnTable 1.3.6.1.4.1.2272.1.12.6.1
A table used to store Mlt interface statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatMltIfExtnEntry

rcStatMltIfExtnEntry 1.3.6.1.4.1.2272.1.12.6.1.1
Mlt interface statistics
Status: current Access: not-accessible
OBJECT-TYPE    
  RcStatMltIfExtnEntry  

rcStatMltIfExtnMltId 1.3.6.1.4.1.2272.1.12.6.1.1.1
Mlt Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..512  

rcStatMltIfExtnIfInMulticastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.2
multi-pkts to upper
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIfExtnIfInBroadcastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.3
broad-pkts to upper
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIfExtnIfOutMulticastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.4
multi-pkts from upper
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIfExtnIfOutBroadcastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.5
broad-pkts from upper
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIfExtnIfHCInOctets 1.3.6.1.4.1.2272.1.12.6.1.1.6
The total number of octets received on the MLT interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCInUcastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.7
The number of packets delivered by this MLT to a higher MLT that were not addressed to a nulticast or broadcase address at this sublayer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCInMulticastPkt 1.3.6.1.4.1.2272.1.12.6.1.1.8
The number of packets delivered to this MLT that were addressed to a nulticast address at this sublayer. For a MAC layer protocol, this number includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCInBroadcastPkt 1.3.6.1.4.1.2272.1.12.6.1.1.9
The number of packets delivered to this MLT that were addressed to a broadcast address at this sublayer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCOutOctets 1.3.6.1.4.1.2272.1.12.6.1.1.10
The total number of octets transmitted out of the MLT interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCOutUcastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.11
The number of packets that hight-level protocols requested be transmitted that were not addressed to a multicast address at this MLT. This total number includes those packets discarded or unsent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCOutMulticast 1.3.6.1.4.1.2272.1.12.6.1.1.12
The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a multicast address at this MLT, including those that were discarded or not sent. For a MAC layer protocol, this number includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCOutBroadcast 1.3.6.1.4.1.2272.1.12.6.1.1.13
The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a broadcase address at this MLT, including those that were discarded or not sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltEtherTable 1.3.6.1.4.1.2272.1.12.6.2
A table used to store Mlt Ethernet statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatMltEtherEntry

rcStatMltEtherEntry 1.3.6.1.4.1.2272.1.12.6.2.1
Mlt enternet statistics
Status: current Access: not-accessible
OBJECT-TYPE    
  RcStatMltEtherEntry  

rcStatMltEtherMltId 1.3.6.1.4.1.2272.1.12.6.2.1.1
A value that uniquely identifies the Multi-Link Trunk associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..512  

rcStatMltEtherAlignmentErrors 1.3.6.1.4.1.2272.1.12.6.2.1.2
A count of frames received on a particular MLT that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherFCSErrors 1.3.6.1.4.1.2272.1.12.6.2.1.3
A count of frames received on an MLT that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherSingleCollFrames 1.3.6.1.4.1.2272.1.12.6.2.1.4
A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this objects is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and it not counted by the corresponding instance of the MultipleCollisionFrames object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherMultipleCollFrames 1.3.6.1.4.1.2272.1.12.6.2.1.5
A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the SingleCollisionFrames objects.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherSQETestError 1.3.6.1.4.1.2272.1.12.6.2.1.6
A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular MLT. SQE stands for Signal Quality Error.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherDeferredTransmiss 1.3.6.1.4.1.2272.1.12.6.2.1.7
A count of frames for which the first transmission attempt on a particular MLT is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherLateCollisions 1.3.6.1.4.1.2272.1.12.6.2.1.8
The number of times that a collision is detected on a particular MLT later than 512 bit-times (64 octets) into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 mb/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherExcessiveCollis 1.3.6.1.4.1.2272.1.12.6.2.1.9
A count of frames for which transmission on a particular MLT fails due to excessive collisions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherIMacTransmitError 1.3.6.1.4.1.2272.1.12.6.2.1.10
A count of frames for which transmission on a particular MLT fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the LateCollisions object, the ExcessiveCollisions object, or the CarrierSenseError object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherCarrierSenseError 1.3.6.1.4.1.2272.1.12.6.2.1.11
The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular MLT. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherFrameTooLong 1.3.6.1.4.1.2272.1.12.6.2.1.12
A count of frames received on a particular MLT that exceed the maximum permitted size (1518 octets). The count represented by an instance os this object is incremented when the frame TooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltEtherIMacReceiveError 1.3.6.1.4.1.2272.1.12.6.2.1.13
A count of frames for which reception on a particular MLT fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the FrameTooLongs object, the AlignmentErrors object, of the FCSErrors objects. The precise meaning of the count represented by an instance of this object is implementation specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpTable 1.3.6.1.4.1.2272.1.12.6.3
A table used to store Mlt Ip statistics.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatMltIpEntry

rcStatMltIpEntry 1.3.6.1.4.1.2272.1.12.6.3.1
Mlt enternet statistics
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcStatMltIpEntry  

rcStatMltIpMltId 1.3.6.1.4.1.2272.1.12.6.3.1.1
Mlt Id
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

rcStatMltIpInReceives 1.3.6.1.4.1.2272.1.12.6.3.1.2
all incoming packets
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpInHdrErrors 1.3.6.1.4.1.2272.1.12.6.3.1.3
hdr errors detected
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpInAddrErrors 1.3.6.1.4.1.2272.1.12.6.3.1.4
bad dest. ip addr
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpForwDatagrams 1.3.6.1.4.1.2272.1.12.6.3.1.5
packets forwarded
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpInUnknownProtos 1.3.6.1.4.1.2272.1.12.6.3.1.6
unsupported protocol
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpInDiscards 1.3.6.1.4.1.2272.1.12.6.3.1.7
good, but no buffer
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpInDelivers 1.3.6.1.4.1.2272.1.12.6.3.1.8
pkts delivered to upper
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpOutRequest 1.3.6.1.4.1.2272.1.12.6.3.1.9
pkts received from upper
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpOutDiscards 1.3.6.1.4.1.2272.1.12.6.3.1.10
good, but no buffer
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpOutNoRoutes 1.3.6.1.4.1.2272.1.12.6.3.1.11
no route to destination
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpReasmReqds 1.3.6.1.4.1.2272.1.12.6.3.1.12
fragments to reassem
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpReasmOKs 1.3.6.1.4.1.2272.1.12.6.3.1.13
reassembled successfully
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpReasmFails 1.3.6.1.4.1.2272.1.12.6.3.1.14
reassembly failures
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpFragOKs 1.3.6.1.4.1.2272.1.12.6.3.1.15
fragment successfully
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpFragFails 1.3.6.1.4.1.2272.1.12.6.3.1.16
fragment failure
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpFragCreates 1.3.6.1.4.1.2272.1.12.6.3.1.17
pkts due to fragmenting
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIpRoutingDiscards 1.3.6.1.4.1.2272.1.12.6.3.1.18
Route entries removed
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltIstDownCnt 1.3.6.1.4.1.2272.1.12.6.4
Counters that counts how the session between the two peering switches has done down since last boot.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltHelloTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.5
Counters that counts the tx hello msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltHelloRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.6
Counters that counts the rx hello msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltLearnMacAddrTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.7
Counters that counts the tx learn Mac Address msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltLearnMacAddrRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.8
Counters that counts the rx learn Mac Address msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltMacAddrAgeOutTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.9
Counters that counts the tx Mac Address Aging Out msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltMacAddrAgeOutRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.10
Counters that counts the rx Mac Address Aging Out msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltMacAddrAgeExpTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.11
Counters that counts the tx Mac Address age expired msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltMacAddrAgeExpRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.12
Counters that counts the rx Mac Address age expired msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltStgInfoTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.13
Counters that counts the tx Stg information msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltStgInfoRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.14
Counters that counts the rx Stg information msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltDelMacAddrTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.15
Counters that counts the tx deleted MAC address msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltDelMacAddrRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.16
Counters that counts the rx deleted MAC address msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltSmltDownTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.17
Counters that counts the tx Smlt Down msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltSmltDownRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.18
Counters that counts the rx Smlt Down msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltSmltUpTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.19
Counters that counts the tx Smlt Up msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltSmltUpRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.20
Counters that counts the rx Smlt Up msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltSendMacTblTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.21
Counters that counts the tx Send Mac Table msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltSendMacTblRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.22
Counters that counts the rx Send Mac Table msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltIgmpTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.23
Counters that counts the tx Igmp msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltIgmpRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.24
Counters that counts the rx Igmp msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltPortDownTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.25
Counters that counts the tx port down msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltPortDownRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.26
Counters that counts the rx port down msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltReqMacTblTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.27
Counters that counts the tx request Mac table msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltReqMacTblRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.28
Counters that counts the rx request Mac table msg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltRxUnknownMsgTypeCnt 1.3.6.1.4.1.2272.1.12.6.29
Counters that counts the rx unknown msg type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltIfUtilTable 1.3.6.1.4.1.2272.1.12.6.30
A table used to store Mlt interface utilization.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatMltIfUtilEntry

rcStatMltIfUtilEntry 1.3.6.1.4.1.2272.1.12.6.30.1
Mlt interface utilization
Status: current Access: not-accessible
OBJECT-TYPE    
  RcStatMltIfUtilEntry  

rcStatMltIfUtilMltId 1.3.6.1.4.1.2272.1.12.6.30.1.1
To assign an Id within the range specified to the Mlt created
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..32  

rcStatMltIfUtilIfHCInOctets 1.3.6.1.4.1.2272.1.12.6.30.1.2
The total number of octets received on the MLT interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltIfUtilIfHCInUtil 1.3.6.1.4.1.2272.1.12.6.30.1.3
The best estimate of the mean physical layer network utilization on this interface during this interval, in percent.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

rcStatMltIfUtilIfHCOutOctets 1.3.6.1.4.1.2272.1.12.6.30.1.4
The total number of octets transmitted out of the MLT interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rcStatMltIfUtilIfHCOutUtil 1.3.6.1.4.1.2272.1.12.6.30.1.5
The best estimate of the mean physical layer network utilization on this interface during this interval, in percent.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

rcStatSmltLacpInfoRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.31
LACP info msgs received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatSmltLacpInfoTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.32
LACP info msgs transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStatMltUtilTable 1.3.6.1.4.1.2272.1.12.6.33
A table used to store statistics for MLT members utilization.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatMltUtilEntry

rcStatMltUtilEntry 1.3.6.1.4.1.2272.1.12.6.33.1
An entry for MLT members utilization statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcStatMltUtilEntry  

rcStatMltUtilPortIfIndex 1.3.6.1.4.1.2272.1.12.6.33.1.1
Port ifIndex, member of rcMltId.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

rcStatMltUtilTrafficType 1.3.6.1.4.1.2272.1.12.6.33.1.2
Type of traffic for one MLT port interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER rx(1), tx(2), rxTx(3)  

rcStatMltUtilTrafficLast5Min 1.3.6.1.4.1.2272.1.12.6.33.1.3
This object returns the percentage of traffic on one MLT port interface for the last 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

rcStatMltUtilTrafficLast30Min 1.3.6.1.4.1.2272.1.12.6.33.1.4
This object returns the percentage of traffic on one MLT port interface for the last 30 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

rcStatMltUtilTrafficLast1Hour 1.3.6.1.4.1.2272.1.12.6.33.1.5
This object returns the percentage of traffic on one MLT port interface for the last hour.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

rcMltNumMlts 1.3.6.1.4.1.2272.1.17.1
The number of MLTs currently defined in the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcMltPotentialMembers 1.3.6.1.4.1.2272.1.17.2
The set of ports that are not members of any MLT.
Status: current Access: read-only
OBJECT-TYPE    
  PortSet  

rcMltIstSessionEnable 1.3.6.1.4.1.2272.1.17.3
Used to enable/disable mlt functionality.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcMltIstSessionStatus 1.3.6.1.4.1.2272.1.17.4
Used to enable/disable mlt functionality.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

rcMltIstPeerIp 1.3.6.1.4.1.2272.1.17.5
IST mlt Peer Ip address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcMltIstVlanId 1.3.6.1.4.1.2272.1.17.6
IST mlt Vlan Id.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4095  

rcMltDisablePortsOnShutdown 1.3.6.1.4.1.2272.1.17.7
When true(1), the port members of an MLT will be automatically shutdown when the MLT becomes disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcMltTable 1.3.6.1.4.1.2272.1.17.10
A list of Multi-Link Trunk entries. The number of entries is given by rcMltNumMlts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcMltEntry

rcMltEntry 1.3.6.1.4.1.2272.1.17.10.1
Entry containing configuration information for a particular Multi-Link Trunk.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcMltEntry  

rcMltId 1.3.6.1.4.1.2272.1.17.10.1.1
A value that uniquely identifies the Multi-Link Trunk associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..512  

rcMltName 1.3.6.1.4.1.2272.1.17.10.1.2
An administratively-assigned name for this MLT.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..20)  

rcMltPortMembers 1.3.6.1.4.1.2272.1.17.10.1.3
The set of ports that are members of this MLT.
Status: current Access: read-create
OBJECT-TYPE    
  PortSet  

rcMltPortType 1.3.6.1.4.1.2272.1.17.10.1.4
The type of MLT port: access(1) or trunk(2).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER access(1), trunk(2)  

rcMltNumVlanIds 1.3.6.1.4.1.2272.1.17.10.1.5
Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcMltVlanIds 1.3.6.1.4.1.2272.1.17.10.1.6
An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the VLAN ID.
Status: current Access: read-create
OBJECT-TYPE    
  IdList Size(0..8192)  

rcMltRowStatus 1.3.6.1.4.1.2272.1.17.10.1.7
Used to create/delete entries in the rcMltTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

rcMltEnable 1.3.6.1.4.1.2272.1.17.10.1.8
Enable the entry.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

rcMltLoadBalance 1.3.6.1.4.1.2272.1.17.10.1.9
Perform load balance?
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

rcMltDistributionAlgorithm 1.3.6.1.4.1.2272.1.17.10.1.10
The load balancing algorithm.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), basic(2), advanced(3)  

rcMltIfIndex 1.3.6.1.4.1.2272.1.17.10.1.11
Used to indicate the 'logical' ifIndex assigned to this MLT.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

rcMltMltType 1.3.6.1.4.1.2272.1.17.10.1.12
MLT type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normalMLT(1), istMLT(2), splitMLT(3)  

rcMltSmltId 1.3.6.1.4.1.2272.1.17.10.1.13
Split MLT id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..512  

rcMltRunningType 1.3.6.1.4.1.2272.1.17.10.1.14
Split MLT running type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normalMLT(1), istMLT(2), splitMLT(3)  

rcMltSvlanPortType 1.3.6.1.4.1.2272.1.17.10.1.15
Set MLT port type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(1), uni(2), nni(3)  

rcMltMulticastDistribution 1.3.6.1.4.1.2272.1.17.10.1.16
Enable/Disable multicast distribution per mlt.
Status: current Access: read-create
OBJECT-TYPE    
  EnableValue  

rcMltLacp10gBackup 1.3.6.1.4.1.2272.1.17.10.1.17
Enable/Disable 10G Mlt reliance backup mode.
Status: current Access: read-create
OBJECT-TYPE    
  EnableValue  

rcMltAggregatable 1.3.6.1.4.1.2272.1.17.10.1.18
Enable/Disable link aggregation on a MLT.
Status: current Access: read-create
OBJECT-TYPE    
  EnableValue  

rcMltClearLinkAggregate 1.3.6.1.4.1.2272.1.17.10.1.19
clear link aggregate, equivalent to disable and re-enable aggregatable on the MLT.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

rcMltNtStgEnable 1.3.6.1.4.1.2272.1.17.10.1.20
Indicates whether this MLT is operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

rcMltDesignatedPort 1.3.6.1.4.1.2272.1.17.10.1.21
Indicates the Designated port for the MLT.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcMltAggOperState 1.3.6.1.4.1.2272.1.17.10.1.22
Link aggregation state on a MLT.
Status: current Access: read-only
OBJECT-TYPE    
  EnableValue  

rcMltAggTimeOfLastOperChange 1.3.6.1.4.1.2272.1.17.10.1.23
The time value since the interface entered its current operational state.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

rcMltVplsMgmtVlan 1.3.6.1.4.1.2272.1.17.10.1.24
Management Vlan is configured on this mlt
Status: current Access: read-create
OBJECT-TYPE    
  EnableValue  

rcMltLoadDistributionOption 1.3.6.1.4.1.2272.1.17.10.1.25
Used to specify the Load Balancing option for MLT in UNI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER bmac(1), cmac(2), bvid(3), isid(4)  

rcMltUniAggrMacIdx 1.3.6.1.4.1.2272.1.17.10.1.26
Used to specify the index of the mac address pool reserved for MLT uni
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..448  

rcMltUniAggrMacAddress 1.3.6.1.4.1.2272.1.17.10.1.27
Used to display the mac address reserved for this MLT
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcMltQinqEtherType 1.3.6.1.4.1.2272.1.17.10.1.28
The qinq ether type value. It should be displayed and input as Hex value. It would only be used when MLT is associated with QnQ service UNI. Otherwise, it would be ignored
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..FFFF  

rcMltEgressCosProfileName 1.3.6.1.4.1.2272.1.17.10.1.29
Mlt Egress COS Profile Name, which is defined by rcCosProfileTable
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..20)  

rcMltEgressPolicerAdminState 1.3.6.1.4.1.2272.1.17.10.1.30
Enable/disable Mlt Egress Policer
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcMltAggrEgressBandwidth 1.3.6.1.4.1.2272.1.17.10.1.31
Aggregated Egress Bandwidth Policer is used.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcMltAggrIngressBandwidth 1.3.6.1.4.1.2272.1.17.10.1.32
Aggregated Ingress Bandwidth Policer is used.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcMltAggrMacAlloc 1.3.6.1.4.1.2272.1.17.10.1.33
Aggregated Mac Allocation is used
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  


rcMltMtu 1.3.6.1.4.1.2272.1.17.10.1.35
MTU for ports in Mlt
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1518..9600  

rcMltInterfaceType 1.3.6.1.4.1.2272.1.17.10.1.36
This value indicates whether ports in the mlt are of type . A port can be included in any EVPN service only if this attribute is set to uni. If the port is not part of any VLAN the interface-type is set to silent. Before adding a port to a VLAN the interface type should be changed to normal.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), silent(2), uni(3)  

rcMltConfiguredMembers 1.3.6.1.4.1.2272.1.17.10.1.37
The set of ports that are configured members of this MLT. Toronto release allows us to add a port to a LACP enabled MLT. These port get added as ConfiguredMembers
Status: current Access: read-write
OBJECT-TYPE    
  PortSet  

rcMltMtuAdminState 1.3.6.1.4.1.2272.1.17.10.1.38
Set Mlt MTU enable or disable
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcMltPeerPortMembers 1.3.6.1.4.1.2272.1.17.10.1.39
The set of Peer ports which are connected to local ports (rcMltPortMember) of this MLT
Status: current Access: read-only
OBJECT-TYPE    
  PortSet  

rcMltCpLimitPktRate 1.3.6.1.4.1.2272.1.17.10.1.40
Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1000..20000  

rcMltCpLimitShutDownEnable 1.3.6.1.4.1.2272.1.17.10.1.41
Used to indicate if the mlt-ports should be shutdown when the CpLimitPktRate is exceeded.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcMltVlanIdList 1.3.6.1.4.1.2272.1.17.10.1.42
This bitfield is used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

rcMltEntryOwner 1.3.6.1.4.1.2272.1.17.10.1.43
Defines the owner of the MLT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), local(2), remote(3), localAndRemote(4)  

rcMltDatapathProgrammingState 1.3.6.1.4.1.2272.1.17.10.1.44
Defines the datapath programming state of the MLT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), local(2), remote(3), localAndRemote(4)  

rcMltMcastDistribution 1.3.6.1.4.1.2272.1.17.11
OBJECT IDENTIFIER    

rcMltMcastDistributionEnable 1.3.6.1.4.1.2272.1.17.11.1
Used to enable/disable this feature to distribute multicast traffic on MLT ports. All the cards in the system must be E-Tickets. Cannot perform distribution in a mixed mode.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcMltMcastDistributionGrpMask 1.3.6.1.4.1.2272.1.17.11.2
Group Mask. Create a MLT abstraction layer to distribute traffic basd on (source, group) information of the multicast packet. The algorithm to pick the actual port nedds to generate a fairly random number for different combinations but a lways generate the same number for a given (source, group) pair. By default, the number of active ports of the MLT is used to MOD the pseudo-random number generated by the XOR of each byte of the masked group address with the masked source address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcMltMcastDistributionSrcMask 1.3.6.1.4.1.2272.1.17.11.3
Source Mask.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcMltMcastDistributionRedistributionEnable 1.3.6.1.4.1.2272.1.17.11.4
Enable redistribution.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcSltPortTable 1.3.6.1.4.1.2272.1.17.12
Table containing config info for SLT
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcSltPortEntry

rcSltPortEntry 1.3.6.1.4.1.2272.1.17.12.1
Entry containing configuration information for a particular Multi-Link Trunk.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcSltPortEntry  

rcSltPortIfIndex 1.3.6.1.4.1.2272.1.17.12.1.1
An interface for this SLT.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcSltPortSmltId 1.3.6.1.4.1.2272.1.17.12.1.2
A uniquely identifies the Single-Link Trunk associated with this entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..512  

rcSltPortOperType 1.3.6.1.4.1.2272.1.17.12.1.3
The current operate type of the port normal or smlt.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), smlt(2)  

rcSltPortRowStatus 1.3.6.1.4.1.2272.1.17.12.1.4
Used to create/delete entries of the Table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

rcMltVlacpTable 1.3.6.1.4.1.2272.1.17.13
Mlt Virtual LACP table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcMltVlacpEntry

rcMltVlacpEntry 1.3.6.1.4.1.2272.1.17.13.1
Entry containing info. for a particular port
Status: current Access: not-accessible
OBJECT-TYPE    
  RcMltVlacpEntry  

rcMltVlacpAdminEnable 1.3.6.1.4.1.2272.1.17.13.1.1
Administratively enable/disable Virtual LACP on a MLT
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcMltVlacpFastPeriodicTimer 1.3.6.1.4.1.2272.1.17.13.1.2
The number of miliseconds between periodic transmissions using Short Timeouts
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcMltVlacpTimeoutScale 1.3.6.1.4.1.2272.1.17.13.1.3
Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcMltVlacpEtherMacAddress 1.3.6.1.4.1.2272.1.17.13.1.4
Multicast Mac Address exclusively used for VLACPDU's
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

rcMltVlacpDualHomingEnable 1.3.6.1.4.1.2272.1.17.13.1.5
Enable/Disable Dual homing on Virtual LACP on a MLT
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcMltBvidPortTable 1.3.6.1.4.1.2272.1.17.14
Table contains Bridge Vlan configured information for Primary and Secondary ports for MLT-UNI
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcMltBvidPortEntry

rcMltBvidPortEntry 1.3.6.1.4.1.2272.1.17.14.1
Entry with Info about VLAN with its Primary and secondary ports for MLT-UNI
Status: current Access: not-accessible
OBJECT-TYPE    
  RcMltBvidPortEntry  

rcMltBvidMltId 1.3.6.1.4.1.2272.1.17.14.1.1
VLAN ID of the Port List
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..256  

rcMltBvidVlanId 1.3.6.1.4.1.2272.1.17.14.1.2
VLAN ID of the Port List
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4096  

rcMltBvidPrimaryPort 1.3.6.1.4.1.2272.1.17.14.1.3
Primary port of the MLT for the VLAN when load distribution option is b-vid
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

rcMltBvidSecondaryPort 1.3.6.1.4.1.2272.1.17.14.1.4
Secondary port of the MLT for the VLAN when load distribution option is b-vid
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

rcMltBvidRowStatus 1.3.6.1.4.1.2272.1.17.14.1.5
Used to Add/delete entries in the table
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

rcMltNotificationObjects 1.3.6.1.4.1.2272.1.17.15
OBJECT IDENTIFIER    

rcMltAggTrapEvent 1.3.6.1.4.1.2272.1.17.15.1
Three trap events type: local down(1), remote down(2), up(3).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER localdown(1), remotedown(2), up(3)  

rcLinkFlapDetectAutoPortDownEnable 1.3.6.1.4.1.2272.1.27.1
Used to enable/disable the Link Flap Detect feature. When enabled this feature will monitor the number of times a port goes down during a certain interval. If the number exceeds a given bound the port will be forced out-of-service.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcLinkFlapDetectSendTrap 1.3.6.1.4.1.2272.1.27.2
Used to configure whether a trap should be sent if the port is forced out-of-service.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcLinkFlapDetectFrequency 1.3.6.1.4.1.2272.1.27.3
Used to configure the number of times the port can go down.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..9999  

rcLinkFlapDetectInterval 1.3.6.1.4.1.2272.1.27.4
Used to configure the interval (in minutes).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..600  

rcL2RedundancyHaCpuState 1.3.6.1.4.1.2272.1.32.1
Indicate the Ha-CPU state. initialization - indicate the CPU is in this state. oneWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (1). twoWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (2). synchronized - Table based synchroniztion was completed on the current CPU (3). remoteIncompatible - CPUs framework version is incompatible with the remote CPU (4). error - If an invalid event is generated in a given state the CPU enters Error state (5). disabled - High Availability is not enabled (6). peerNotConnected - no peer connection is established (7). peerConnected - peer connection is established (8). lostPeerConnection - lost connection to peer/Standby CPU (9). notSynchronized - Table Sync is not complete (10). synchronizeInProgress - Table Sync is in progress (11).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER initialization(0), oneWayActive(1), twoWayActive(2), synchronized(3), remoteIncompatible(4), error(5), disabled(6), peerNotConnected(7), peerConnected(8), lostPeerConnection(9), notSynchronized(10), synchronizeInProgress(11)  

rcL2RedundancyHaEvent 1.3.6.1.4.1.2272.1.32.2
Indicate the Ha event status. restart (0) - Causes the state machine to restart systemRegistrationDone (1)- Causes the CPU to transfer to One Way or Two Way Active state. Locally or message received from remote CPU. tableSynchronizationDone (2) - Causes the CPU to transfer to Synchronized state. versionIncompatible (3) - Causes the CPU to go to Remote Incompatible state noEvent (4) - Means no event has occured uptill now.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER restart(0), systemRegistrationDone(1), tableSynchronizationDone(2), versionIncompatible(3), noEvent(4)  

rcL2RedundancyEnable 1.3.6.1.4.1.2272.1.32.3
Indicate the feature enable/disable.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcL2RedundancyStandbyCpu 1.3.6.1.4.1.2272.1.32.4
Indicate if the L2 Redundancy is enabled on the standby CPU.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER hotStandbyCPU(1), warmStandbyCPU(2), standbyCPUNotPresent(3)