RC-IP-PIM-MIB

File: RC-IP-PIM-MIB.mib (17999 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
RC-IP-MIB RAPID-CITY

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
IpAddress TruthValue RowStatus
InterfaceIndex rcIpPim EnableValue

Defined Types

RcIpPimEntry  
SEQUENCE    
  rcIpPimIfIndex InterfaceIndex
  rcIpPimEnable TruthValue
  rcIpPimMode INTEGER
  rcIpPimHelloInterval Integer32
  rcIpPimJoinPruneInterval Integer32
  rcIpPimCBSRPreference Integer32
  rcIpPimIntfType INTEGER

RcIpPimInterfaceEntry  
SEQUENCE    
  rcIpPimInterfaceIfIndex InterfaceIndex
  rcIpPimInterfaceOperState INTEGER
  rcIpPimInterfaceType INTEGER
  rcIpPimInterfaceCBSREnable TruthValue

RcIpPimStaticRPEntry  
SEQUENCE    
  rcIpPimStaticRPGroupAddress IpAddress
  rcIpPimStaticRPGroupMask IpAddress
  rcIpPimStaticRPAddress IpAddress
  rcIpPimStaticRPRowStatus RowStatus
  rcIpPimStaticRPStatus INTEGER

RcIpPimVirtualNbrEntry  
SEQUENCE    
  rcIpPimVirtualNbrAddress IpAddress
  rcIpPimVirtualNbrIfIndex InterfaceIndex
  rcIpPimVirtualNbrRowStatus RowStatus

Defined Values

rcIpPimMib 1.3.6.1.4.1.2272.1.8.16.0
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY    

rcIpPimGlobal 1.3.6.1.4.1.2272.1.8.16.1
OBJECT IDENTIFIER    

rcIpPimGlobalEnable 1.3.6.1.4.1.2272.1.8.16.1.1
enable feature
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPimGlobalMode 1.3.6.1.4.1.2272.1.8.16.1.2
PIM global mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dm(1), sm(2), smdm(3), ssm(4)  

rcIpPimGlobalMbr 1.3.6.1.4.1.2272.1.8.16.1.3
enable/disable pim multicast border router feature
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPimGlobalRegisterSuppTimer 1.3.6.1.4.1.2272.1.8.16.1.4
Each source's DR maintains, per (S,G), a Register- Suppression-timer in seconds. The Register- Suppression-timer is started by the Register-Stop message; upon expiration, the source's DR resumes sending data packets to the RP, encapsulated in the Register message.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..65535  

rcIpPimGlobalInterfaceTableSize 1.3.6.1.4.1.2272.1.8.16.1.5
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPimGlobalUniRouteChgTimeOut 1.3.6.1.4.1.2272.1.8.16.1.6
This timer allows a better tuning on how fast the routing information is going to get updated from RTM (the frequency at which the RTM is polled for routing information updates).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..65535  

rcIpPimGlobalDiscardDataTimeOut 1.3.6.1.4.1.2272.1.8.16.1.7
This timer is used to discard data until the Join is received from the RP. A ipmc discard record is created and deleted once the timer expires and/or when a Join is received.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..65535  

rcIpPimGlobalCRPADVTimeOut 1.3.6.1.4.1.2272.1.8.16.1.8
Routers configured as candidate RPs use this timer to periodically send C-RP-Adv messages. Upon expiry, a C-RP-Adv message is sent to the elected BSR.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..26214  

rcIpPimGlobalBootStrapPeriod 1.3.6.1.4.1.2272.1.8.16.1.9
At the elected BSR, this is the interval between originating Bootstrap messages.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..32757  

rcIpPimGlobalStaticRP 1.3.6.1.4.1.2272.1.8.16.1.10
Enable/Disable Static RP feature.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPimGlobalActivityChkInterval 1.3.6.1.4.1.2272.1.8.16.1.11
Activity check interval for polling PIM SG traffic activity information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER intv15(15), intv30(30), intv42(42), intv70(70), intv105(105), intv210(210)  

rcIpPimGlobalFwdCacheTimeOut 1.3.6.1.4.1.2272.1.8.16.1.12
PIM forward cache expiry value in seconds. This value is going to be used in aging PIM mroutes in seconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..86400  

rcIpPimGlobalFastJoinPrune 1.3.6.1.4.1.2272.1.8.16.1.13
Pim Fast Join Prune.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcIpPimGlobalStaticRPSpecificRt 1.3.6.1.4.1.2272.1.8.16.1.14
Enable/Disable Static RP specific route feature.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPimGlobalOperEnable 1.3.6.1.4.1.2272.1.8.16.1.15
Indicates whether PIM is operationally enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcIpPimTable 1.3.6.1.4.1.2272.1.8.16.2
IP Pim table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPimEntry

rcIpPimEntry 1.3.6.1.4.1.2272.1.8.16.2.1
An entry of Ip Pim Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpPimEntry  

rcIpPimIfIndex 1.3.6.1.4.1.2272.1.8.16.2.1.1
port
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcIpPimEnable 1.3.6.1.4.1.2272.1.8.16.2.1.2
enable interface
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPimMode 1.3.6.1.4.1.2272.1.8.16.2.1.3
Interface PIM mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dense(1), sparse(2), sparseDense(3), ssm(4)  

rcIpPimHelloInterval 1.3.6.1.4.1.2272.1.8.16.2.1.4
frq. at which hello sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..18724  

rcIpPimJoinPruneInterval 1.3.6.1.4.1.2272.1.8.16.2.1.5
Interface PIM prune interval
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..18724  

rcIpPimCBSRPreference 1.3.6.1.4.1.2272.1.8.16.2.1.6
Interface PIM CBSR preference
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..255  

rcIpPimIntfType 1.3.6.1.4.1.2272.1.8.16.2.1.7
Pim interface type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

rcIpPimInterfaceTable 1.3.6.1.4.1.2272.1.8.16.3
IP Pim table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPimInterfaceEntry

rcIpPimInterfaceEntry 1.3.6.1.4.1.2272.1.8.16.3.1
An entry of Ip Pim Interface Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpPimInterfaceEntry  

rcIpPimInterfaceIfIndex 1.3.6.1.4.1.2272.1.8.16.3.1.1
port
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcIpPimInterfaceOperState 1.3.6.1.4.1.2272.1.8.16.3.1.2
The current operational state of this PIM interface. This object is deprecated in favor of ifOperStatus.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

rcIpPimInterfaceType 1.3.6.1.4.1.2272.1.8.16.3.1.3
Pim interface type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

rcIpPimInterfaceCBSREnable 1.3.6.1.4.1.2272.1.8.16.3.1.4
Enable/disable Candidate BSR on pim local interface.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPimStaticRPTable 1.3.6.1.4.1.2272.1.8.16.4
The table lists all the RPs configured statically for various IP multicast groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPimStaticRPEntry

rcIpPimStaticRPEntry 1.3.6.1.4.1.2272.1.8.16.4.1
An entry (conceptual row) in the rcIpPimStaticRPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpPimStaticRPEntry  

rcIpPimStaticRPGroupAddress 1.3.6.1.4.1.2272.1.8.16.4.1.1
The IP multicast group address which, when combined with rcIpPimStaticRPGroupMask, identifies a group prefix for which rcIpPimStaticRPAddress is a static-RP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpPimStaticRPGroupMask 1.3.6.1.4.1.2272.1.8.16.4.1.2
The multicast group address mask which, when combined with rcIpPimStaticRPGroupAddress, identifies a group prefix for which rcIpPimStaticRPAddress is a static-RP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpPimStaticRPAddress 1.3.6.1.4.1.2272.1.8.16.4.1.3
The (unicast) address of the static-RP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpPimStaticRPRowStatus 1.3.6.1.4.1.2272.1.8.16.4.1.4
The status of this row, by which new entries may be created, or old entries deleted from this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

rcIpPimStaticRPStatus 1.3.6.1.4.1.2272.1.8.16.4.1.5
The status of StaticRP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

rcIpPimCurrBsr 1.3.6.1.4.1.2272.1.8.16.5
OBJECT IDENTIFIER    

rcIpPimCurrBsrAddress 1.3.6.1.4.1.2272.1.8.16.5.1
Current BSR address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpPimCurrBsrFragmentTag 1.3.6.1.4.1.2272.1.8.16.5.2
Current BSR Fragment Tag
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPimCurrBsrHashMask 1.3.6.1.4.1.2272.1.8.16.5.3
Current BSR Hash Mask value
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpPimCurrBsrPriority 1.3.6.1.4.1.2272.1.8.16.5.4
Current BSR Priority
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPimCurrBsrBootStrapTimer 1.3.6.1.4.1.2272.1.8.16.5.5
Current BSR Boot Strap Timer
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPimVirtualNbrTable 1.3.6.1.4.1.2272.1.8.16.6
Table listing the router's virtual PIM neighbors
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPimVirtualNbrEntry

rcIpPimVirtualNbrEntry 1.3.6.1.4.1.2272.1.8.16.6.1
An entry in the virtual PIM neighbors' table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpPimVirtualNbrEntry  

rcIpPimVirtualNbrAddress 1.3.6.1.4.1.2272.1.8.16.6.1.1
The IP address of the virtual PIM neighbor for which this entry contains information.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

rcIpPimVirtualNbrIfIndex 1.3.6.1.4.1.2272.1.8.16.6.1.2
The value of ifIndex for the PIM interface in which this virtual neighbor is created. This value is mandatory while trying to create a virtual PIM neighbor.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

rcIpPimVirtualNbrRowStatus 1.3.6.1.4.1.2272.1.8.16.6.1.3
To create/delete an entry in the virtual PIM neighbors' table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus