RC-DIAG-MIB

File: RC-DIAG-MIB.mib (57002 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
RAPID-CITY

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
IpAddress DisplayString TruthValue
MacAddress RowStatus InterfaceIndex
rcDiag rcMirror EnableValue

Defined Types

RcDiagMirrorByPortEntry  
SEQUENCE    
  rcDiagMirrorByPortId INTEGER
  rcDiagMirrorByPortMirroredPort InterfaceIndex
  rcDiagMirrorByPortMirroringPort InterfaceIndex
  rcDiagMirrorByPortMode INTEGER
  rcDiagMirrorByPortEnable TruthValue
  rcDiagMirrorByPortRowStatus RowStatus
  rcDiagMirrorByPortOctapidId Integer32
  rcDiagMirrorByPortPid Integer32
  rcDiagMirrorRemoteMirrorVlanId INTEGER

RcDiagPortConvSteeringEntry  
SEQUENCE    
  rcDiagPortConvSteeringId Integer32
  rcDiagPortConvSteeringPortOne Integer32
  rcDiagPortConvSteeringPortTwo Integer32
  rcDiagPortConvSteeringMode INTEGER
  rcDiagPortConvSteeringForwardPort Integer32
  rcDiagPortConvSteeringEnable TruthValue
  rcDiagPortConvSteeringRowStatus RowStatus

RcDiagMacConvSteeringEntry  
SEQUENCE    
  rcDiagMacConvSteeringId Integer32
  rcDiagMacConvSteeringSrcMac MacAddress
  rcDiagMacConvSteeringDstMac MacAddress
  rcDiagMacConvSteeringInPort Integer32
  rcDiagMacConvSteeringForwardPort Integer32
  rcDiagMacConvSteeringEnable TruthValue
  rcDiagMacConvSteeringRowStatus RowStatus

RcDiagVctEntry  
SEQUENCE    
  rcDiagVctIfIndex InterfaceIndex
  rcDiagVctNormalCableLength INTEGER
  rcDiagVctPhyType INTEGER
  rcDiagVctCableStatus INTEGER
  rcDiagVctPair1Status INTEGER
  rcDiagVctPair1ErrLength INTEGER
  rcDiagVctPair2Status INTEGER
  rcDiagVctPair2ErrLength INTEGER
  rcDiagVctPair3Status INTEGER
  rcDiagVctPair3ErrLength INTEGER
  rcDiagVctPair4Status INTEGER
  rcDiagVctPair4ErrLength INTEGER
  rcDiagVctStartTest TruthValue
  rcDiagVctTestDone TruthValue
  rcDiagVctCableCategory INTEGER
  rcDiagVctCableLength Integer32
  rcDiagVctPair1Polarity INTEGER
  rcDiagVctPair1Swap INTEGER
  rcDiagVctPair1Skew Integer32
  rcDiagVctPair2Polarity INTEGER
  rcDiagVctPair2Swap INTEGER
  rcDiagVctPair2Skew Integer32
  rcDiagVctPair3Polarity INTEGER
  rcDiagVctPair3Swap INTEGER
  rcDiagVctPair3Skew Integer32
  rcDiagVctPair4Polarity INTEGER
  rcDiagVctPair4Swap INTEGER
  rcDiagVctPair4Skew Integer32

RcDiagPcapFilterEntry  
SEQUENCE    
  rcDiagPcapFilterId INTEGER
  rcDiagPcapFilterEnable EnableValue
  rcDiagPcapFilterAction INTEGER
  rcDiagPcapFilterSrcMac MacAddress
  rcDiagPcapFilterSrcMask INTEGER
  rcDiagPcapFilterIsInverseSrcMac TruthValue
  rcDiagPcapFilterDstMac MacAddress
  rcDiagPcapFilterDstMask INTEGER
  rcDiagPcapFilterIsInverseDstMac TruthValue
  rcDiagPcapFilterVlanId INTEGER
  rcDiagPcapFilterToVlanId INTEGER
  rcDiagPcapFilterIsInverseVlanId TruthValue
  rcDiagPcapFilterPbit INTEGER
  rcDiagPcapFilterToPbit INTEGER
  rcDiagPcapFilterIsInversePbit TruthValue
  rcDiagPcapFilterEtherType INTEGER
  rcDiagPcapFilterToEtherType INTEGER
  rcDiagPcapFilterIsInverseEtherType TruthValue
  rcDiagPcapFilterProtocolType INTEGER
  rcDiagPcapFilterToProtocolType INTEGER
  rcDiagPcapFilterIsInverseProtocolType TruthValue
  rcDiagPcapFilterSrcIp IpAddress
  rcDiagPcapFilterToSrcIp IpAddress
  rcDiagPcapFilterIsInverseSrcIp TruthValue
  rcDiagPcapFilterDstIp IpAddress
  rcDiagPcapFilterToDstIp IpAddress
  rcDiagPcapFilterIsInverseDstIp TruthValue
  rcDiagPcapFilterDscp INTEGER
  rcDiagPcapFilterToDscp INTEGER
  rcDiagPcapFilterIsInverseDscp TruthValue
  rcDiagPcapFilterRowStatus RowStatus
  rcDiagPcapFilterDscpMatchZero TruthValue
  rcDiagPcapFilterPbitMatchZero TruthValue

RcDiagPcapAdvancedFilterEntry  
SEQUENCE    
  rcDiagPcapAdvancedFilterId INTEGER
  rcDiagPcapAdvancedFilterUdpPort INTEGER
  rcDiagPcapAdvancedFilterToUdpPort INTEGER
  rcDiagPcapAdvancedFilterIsInverseUdpPort TruthValue
  rcDiagPcapAdvancedFilterTcpPort INTEGER
  rcDiagPcapAdvancedFilterToTcpPort INTEGER
  rcDiagPcapAdvancedFilterIsInverseTcpPort TruthValue
  rcDiagPcapAdvancedFilterUserDefinedData DisplayString
  rcDiagPcapAdvancedFilterUserDefinedDataSize INTEGER
  rcDiagPcapAdvancedFilterUserDefinedOffset INTEGER
  rcDiagPcapAdvancedFilterIsInverseUserDefined TruthValue
  rcDiagPcapAdvancedFilterTimer INTEGER
  rcDiagPcapAdvancedFilterPacketCount INTEGER
  rcDiagPcapAdvancedFilterRefreshTimer INTEGER
  rcDiagPcapAdvancedFilterRowStatus RowStatus

Defined Values

rcDiagMib 1.3.6.1.4.1.2272.1.23.0
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY    

rcMirrorSaveConfig 1.3.6.1.4.1.2272.1.5.1
Control whether Mirror configuration information should be saved to NVRAM so mirror settings can be automatically reinstalled after a system reboot. Setting rcMirrorSaveConfig to true does not immediately save the configuration information. The save happens when the rcSysAction variable is set to 'saveToNVRAM(4)'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcMirrorByPort 1.3.6.1.4.1.2272.1.5.2
OBJECT IDENTIFIER    

rcMirrorByPortEnable 1.3.6.1.4.1.2272.1.5.2.1
Used to indicate whether the mirror by port feature is active. The system can only support mirroring on two ports. When this feature is active, all packets received on the port(s) specified by rcMirrorSrcPortOne and/or rcMirrorSrcPortTwo are copied to rcMirrorDstPort. The mirroring operation is non-intrusive.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcMirrorByPortMirrorPort 1.3.6.1.4.1.2272.1.5.2.2
The ifIndex of the port to forward mirrored frames to.
Status: deprecated Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rcMirrorByPortEnableMirroredPortOne 1.3.6.1.4.1.2272.1.5.2.3
Used to indicate whether the port specified in rcMirrorByPortMirroredPortOne should be mirrored.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcMirrorByPortMirroredPortOne 1.3.6.1.4.1.2272.1.5.2.4
The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rcMirrorByPortEnableMirroredPortTwo 1.3.6.1.4.1.2272.1.5.2.5
Used to indicate whether the port specified in rcMirrorByPortMirroredPortTwo should be mirrored.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcMirrorByPortMirroredPortTwo 1.3.6.1.4.1.2272.1.5.2.6
The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rcDiagMirrorByPortTable 1.3.6.1.4.1.2272.1.23.1
This table is used to configure the Mirror By Port feature. This feature allows the device to forward a copy of each packet seen on a particular port to a different port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcDiagMirrorByPortEntry

rcDiagMirrorByPortEntry 1.3.6.1.4.1.2272.1.23.1.1
Entry containing mirror by port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcDiagMirrorByPortEntry  

rcDiagMirrorByPortId 1.3.6.1.4.1.2272.1.23.1.1.1
Entry id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..383  

rcDiagMirrorByPortMirroredPort 1.3.6.1.4.1.2272.1.23.1.1.2
Used to configure the 'mirrored' port. The port where packets are copied from.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rcDiagMirrorByPortMirroringPort 1.3.6.1.4.1.2272.1.23.1.1.3
Used to configure the 'mirroring' port. The port where packets are copied to.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rcDiagMirrorByPortMode 1.3.6.1.4.1.2272.1.23.1.1.4
Used to configure the 'mode' of the mirror operation. 'tx' means packets being transmitted on the 'mirrored' port will be copied. 'rx' means packets received on the 'mirrored' port will be copied. 'both' means all traffic on the 'mirrored' port will be copied. 'rxFilter' means packets received on the 'mirrored' port is copied only if it macthes filter criteria. 'txFilter' means packets being transmitted on the 'mirrorred' port is copied only if it matches filter criteria. 'bothFilter' means both ingress and egress traffic will be copied if it matches either ingress or egress filter on the 'mirrored' port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tx(1), rx(2), both(3), rxFilter(4), txFilter(5), bothFilter(6)  

rcDiagMirrorByPortEnable 1.3.6.1.4.1.2272.1.23.1.1.5
Used to enable/disable this entry.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagMirrorByPortRowStatus 1.3.6.1.4.1.2272.1.23.1.1.6
Row status of this entry.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcDiagMirrorByPortOctapidId 1.3.6.1.4.1.2272.1.23.1.1.7
Octapid Id for a port.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcDiagMirrorByPortPid 1.3.6.1.4.1.2272.1.23.1.1.8
Pid for a port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDiagMirrorRemoteMirrorVlanId 1.3.6.1.4.1.2272.1.23.1.1.9
vlan-id to which mirrored packets needs to be send for remote mirroring. If set, this vlan id is used in mirror tag of the remote mirrored packet
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

rcDiagPortConvSteeringTable 1.3.6.1.4.1.2272.1.23.2
Diag Port Conv Steering Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcDiagPortConvSteeringEntry

rcDiagPortConvSteeringEntry 1.3.6.1.4.1.2272.1.23.2.1
Entry containing infomation of Diag Port Conv Steering.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcDiagPortConvSteeringEntry  

rcDiagPortConvSteeringId 1.3.6.1.4.1.2272.1.23.2.1.1
Entry id.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcDiagPortConvSteeringPortOne 1.3.6.1.4.1.2272.1.23.2.1.2
IfIndex for port one
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcDiagPortConvSteeringPortTwo 1.3.6.1.4.1.2272.1.23.2.1.3
IfIndex for port two
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcDiagPortConvSteeringMode 1.3.6.1.4.1.2272.1.23.2.1.4
Used to specify the traffic flow that should be captured between ports one and two.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oneToTwo(1), twoToOne(2), both(3)  

rcDiagPortConvSteeringForwardPort 1.3.6.1.4.1.2272.1.23.2.1.5
IfIndex of the port where captured traffic should be forwarded to.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcDiagPortConvSteeringEnable 1.3.6.1.4.1.2272.1.23.2.1.6
Enable this entry.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPortConvSteeringRowStatus 1.3.6.1.4.1.2272.1.23.2.1.7
Used to create/delete entries in the rcDiagMirrorByPortTable.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcDiagMacConvSteeringTable 1.3.6.1.4.1.2272.1.23.3
Diag Mac Conv Steering Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcDiagMacConvSteeringEntry

rcDiagMacConvSteeringEntry 1.3.6.1.4.1.2272.1.23.3.1
Entry containing infomation of Diag Mac Conv Steering.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcDiagMacConvSteeringEntry  

rcDiagMacConvSteeringId 1.3.6.1.4.1.2272.1.23.3.1.1
Entry id.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcDiagMacConvSteeringSrcMac 1.3.6.1.4.1.2272.1.23.3.1.2
Source MAC address
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

rcDiagMacConvSteeringDstMac 1.3.6.1.4.1.2272.1.23.3.1.3
Destination MAC address
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

rcDiagMacConvSteeringInPort 1.3.6.1.4.1.2272.1.23.3.1.4
IfIndex of ingress port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcDiagMacConvSteeringForwardPort 1.3.6.1.4.1.2272.1.23.3.1.5
IfIndex of the port where captured traffic should be forwarded to.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcDiagMacConvSteeringEnable 1.3.6.1.4.1.2272.1.23.3.1.6
Enable this entry.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagMacConvSteeringRowStatus 1.3.6.1.4.1.2272.1.23.3.1.7
Used to create/delete entries in the rcDiagMirrorByPortTable.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcDiagVctTable 1.3.6.1.4.1.2272.1.23.4
Diag Vct Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcDiagVctEntry

rcDiagVctEntry 1.3.6.1.4.1.2272.1.23.4.1
Entry containing cable infomation and test result.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcDiagVctEntry  

rcDiagVctIfIndex 1.3.6.1.4.1.2272.1.23.4.1.1
Port IfIndex.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcDiagVctNormalCableLength 1.3.6.1.4.1.2272.1.23.4.1.2
Cable length, this indicates a range in which the actual length falls.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cableLT50M(1), cable50M80M(2), cable80M110M(3), cable110M140M(4), cableGT140M(5), cableUnknown(6)  

rcDiagVctPhyType 1.3.6.1.4.1.2272.1.23.4.1.3
Phy type, 100MHz throught 1 GHz, or broadcom phy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER phy100M(1), phy1000M(2), phy10000M(3), phy100000M(4), phyUnknown(5), bcm5464(6), bcm5464s(7)  

rcDiagVctCableStatus 1.3.6.1.4.1.2272.1.23.4.1.4
Status of the cable as a whole. The status of a cable is in a sense, a summation of the status of its pairs. If all the pairs are normal, then the cable is normal. If the cable consists of zero or more normal pairs and one or more open pairs, then the cable is considered open. If it consists of shorted pairs and normal pairs, then the cable is considered shorted. Any combination of open and shorted pairs is considered simply FAILED.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cableFail(1), cableNormal(2), cableOpen(3), cableShorted(4), cableNotApplicable(5), cableUntested(6)  

rcDiagVctPair1Status 1.3.6.1.4.1.2272.1.23.4.1.5
The status of a single pair in the cable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pairFail(1), pairNormal(2), pairOpen(3), pairShorted(4), pairNotApplicable(5), pairNotTested(6), pairForce(7)  

rcDiagVctPair1ErrLength 1.3.6.1.4.1.2272.1.23.4.1.6
Error Pair Length, in meters, measured by Time Domain Reflectometry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

rcDiagVctPair2Status 1.3.6.1.4.1.2272.1.23.4.1.7
The status of a single pair in the cable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pairFail(1), pairNormal(2), pairOpen(3), pairShorted(4), pairNotApplicable(5), pairNotTested(6), pairForce(7)  

rcDiagVctPair2ErrLength 1.3.6.1.4.1.2272.1.23.4.1.8
Error Pair Length, in meters, measured by Time Domain Reflectometry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

rcDiagVctPair3Status 1.3.6.1.4.1.2272.1.23.4.1.9
The status of a single pair in the cable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pairFail(1), pairNormal(2), pairOpen(3), pairShorted(4), pairNotApplicable(5), pairNotTested(6), pairForce(7)  

rcDiagVctPair3ErrLength 1.3.6.1.4.1.2272.1.23.4.1.10
Error Pair Length, in meters, measured by Time Domain Reflectometry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

rcDiagVctPair4Status 1.3.6.1.4.1.2272.1.23.4.1.11
The status of a single pair in the cable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pairFail(1), pairNormal(2), pairOpen(3), pairShorted(4), pairNotApplicable(5), pairNotTested(6), pairForce(7)  

rcDiagVctPair4ErrLength 1.3.6.1.4.1.2272.1.23.4.1.12
Error Pair Length, in meters, measured by Time Domain Reflectometry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

rcDiagVctStartTest 1.3.6.1.4.1.2272.1.23.4.1.13
Start VCT test, Set this object to TRUE to perform a VCT test on the current port. A get on this object produces an undefines value.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagVctTestDone 1.3.6.1.4.1.2272.1.23.4.1.14
When a VCT test is started setting rcDiagVctStartTest, this object is immediately set to FALSE by the switch software. It remain FALSE until the test is completed, when it is set to TRUE. When this object is TRUE, then the management station can immediately perform a GET on the test result for this port.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDiagVctCableCategory 1.3.6.1.4.1.2272.1.23.4.1.15
Cable type: CAT3 or CAT5.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cat3(1), cat5(2)  

rcDiagVctCableLength 1.3.6.1.4.1.2272.1.23.4.1.16
Length of cable in meters based on average electrical length of 4 pairs. Measurement can be done when traffic is live or not.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

rcDiagVctPair1Polarity 1.3.6.1.4.1.2272.1.23.4.1.17
The polarity of a single pair in the cable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inversed(1), normal(2), invalid(3)  

rcDiagVctPair1Swap 1.3.6.1.4.1.2272.1.23.4.1.18
The pair swap in the cable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), swapped(2), invalid(3), error(4)  

rcDiagVctPair1Skew 1.3.6.1.4.1.2272.1.23.4.1.19
Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 means an error occured when trying to get the length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..15  

rcDiagVctPair2Polarity 1.3.6.1.4.1.2272.1.23.4.1.20
The polarity of a single pair in the cable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inversed(1), normal(2), invalid(3)  

rcDiagVctPair2Swap 1.3.6.1.4.1.2272.1.23.4.1.21
The pair swap in the cable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), swapped(2), invalid(3), error(4)  

rcDiagVctPair2Skew 1.3.6.1.4.1.2272.1.23.4.1.22
Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 means an error occured when trying to get the length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..15  

rcDiagVctPair3Polarity 1.3.6.1.4.1.2272.1.23.4.1.23
The polarity of a single pair in the cable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inversed(1), normal(2), invalid(3)  

rcDiagVctPair3Swap 1.3.6.1.4.1.2272.1.23.4.1.24
The pair swap in the cable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), swapped(2), invalid(3), error(4)  

rcDiagVctPair3Skew 1.3.6.1.4.1.2272.1.23.4.1.25
Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 means an error occured when trying to get the length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..15  

rcDiagVctPair4Polarity 1.3.6.1.4.1.2272.1.23.4.1.26
The polarity of a single pair in the cable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inversed(1), normal(2), invalid(3)  

rcDiagVctPair4Swap 1.3.6.1.4.1.2272.1.23.4.1.27
The pair swap in the cable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), swapped(2), invalid(3), error(4)  

rcDiagVctPair4Skew 1.3.6.1.4.1.2272.1.23.4.1.28
Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 means an error occured when trying to get the length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..15  

rcDiagSaveConfig 1.3.6.1.4.1.2272.1.23.10
Used to configure whether the various mirror feature settings should be saved and restored across system reboot.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagMirrorByPortTblSize 1.3.6.1.4.1.2272.1.23.11
Used to indicate table size.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDiagPortConvSteeringTblSize 1.3.6.1.4.1.2272.1.23.12
Used to indicate table size.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDiagMacConvSteeringTblSize 1.3.6.1.4.1.2272.1.23.13
Used to indicate table size.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDiagDiagnosticsEnable 1.3.6.1.4.1.2272.1.23.14
Used to enable/disable the mirroring feature for the entire device. This setting overrides any setting in the various mirroring tables.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcap 1.3.6.1.4.1.2272.1.23.15
OBJECT IDENTIFIER    

rcDiagPcapEnable 1.3.6.1.4.1.2272.1.23.15.1
To enable pcap in secondary CPU
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapBufferWrap 1.3.6.1.4.1.2272.1.23.15.2
To enable buffer wrap-around when buffer is full. If set, pcap will continue to capture pkts, otherwise stops pkt storing
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapPcmciaWrap 1.3.6.1.4.1.2272.1.23.15.3
To wrap around the PCMCIA when saving data in PCMCIA
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFrameSize 1.3.6.1.4.1.2272.1.23.15.4
Number of bytes of pkts needs to be stored
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 64..9600  

rcDiagPcapBufferSize 1.3.6.1.4.1.2272.1.23.15.5
memory to be allocated for capturing the pkt
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..256  

rcDiagPcapAutoSave 1.3.6.1.4.1.2272.1.23.15.6
To save data automatically when buffer is full
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapAutoSaveFileName 1.3.6.1.4.1.2272.1.23.15.7
Name of the file in which the pkt is to be stored
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

rcDiagPcapAutoSaveDevice 1.3.6.1.4.1.2272.1.23.15.8
Where to store the captured pkts. If the option is network, the user need to enter an IP address also
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pcmcia(0), network(1)  

rcDiagPcapAutoSaveNetworkIpAddress 1.3.6.1.4.1.2272.1.23.15.9
ip address of the remote host where the data needs to be stored. This field is valid only if the device is network
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcDiagPcapFilterTableSize 1.3.6.1.4.1.2272.1.23.15.10
Used to indicate the number of entries in the Filter table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDiagPcapFilterTable 1.3.6.1.4.1.2272.1.23.15.11
A table used to store pcap secondary filters
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcDiagPcapFilterEntry

rcDiagPcapFilterEntry 1.3.6.1.4.1.2272.1.23.15.11.1
Pcap secondary filter desc
Status: current Access: not-accessible
OBJECT-TYPE    
  RcDiagPcapFilterEntry  

rcDiagPcapFilterId 1.3.6.1.4.1.2272.1.23.15.11.1.1
Unique ID that represents the filter
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000  

rcDiagPcapFilterEnable 1.3.6.1.4.1.2272.1.23.15.11.1.2
Filter is enabled or not
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcDiagPcapFilterAction 1.3.6.1.4.1.2272.1.23.15.11.1.3
Action to be takesn when policy is matched
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER drop(0), capture(1), trigger-on(2), trigger-off(3)  

rcDiagPcapFilterSrcMac 1.3.6.1.4.1.2272.1.23.15.11.1.4
Soruce mac address to match
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

rcDiagPcapFilterSrcMask 1.3.6.1.4.1.2272.1.23.15.11.1.5
Soruce mac address mask. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..6  

rcDiagPcapFilterIsInverseSrcMac 1.3.6.1.4.1.2272.1.23.15.11.1.6
Soruce mac address Inverse. when set the mac addresses otherthan specified is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterDstMac 1.3.6.1.4.1.2272.1.23.15.11.1.7
Destination mac address
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

rcDiagPcapFilterDstMask 1.3.6.1.4.1.2272.1.23.15.11.1.8
Destination mac address mask. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..6  

rcDiagPcapFilterIsInverseDstMac 1.3.6.1.4.1.2272.1.23.15.11.1.9
Destination mac address Inverse. when set the mac addresses otherthan specified is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterVlanId 1.3.6.1.4.1.2272.1.23.15.11.1.10
Vlan-id of the packet to be matched
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4092  

rcDiagPcapFilterToVlanId 1.3.6.1.4.1.2272.1.23.15.11.1.11
To Vlan-id. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4092  

rcDiagPcapFilterIsInverseVlanId 1.3.6.1.4.1.2272.1.23.15.11.1.12
Vlan-Id Inverse. when set the Vlan-Id otherthan specified range is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterPbit 1.3.6.1.4.1.2272.1.23.15.11.1.13
pBit of the packet to be matched
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

rcDiagPcapFilterToPbit 1.3.6.1.4.1.2272.1.23.15.11.1.14
To pBit. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

rcDiagPcapFilterIsInversePbit 1.3.6.1.4.1.2272.1.23.15.11.1.15
pBit Inverse. when set the pBit otherthan specified range is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterEtherType 1.3.6.1.4.1.2272.1.23.15.11.1.16
EtherType of the packet to be matched
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcDiagPcapFilterToEtherType 1.3.6.1.4.1.2272.1.23.15.11.1.17
To EtherType. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcDiagPcapFilterIsInverseEtherType 1.3.6.1.4.1.2272.1.23.15.11.1.18
EtherType Inverse. when set the EtherType otherthan specified range is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterProtocolType 1.3.6.1.4.1.2272.1.23.15.11.1.19
ProtocolType of the packet to be matched
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rcDiagPcapFilterToProtocolType 1.3.6.1.4.1.2272.1.23.15.11.1.20
To ProtocolType. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rcDiagPcapFilterIsInverseProtocolType 1.3.6.1.4.1.2272.1.23.15.11.1.21
ProtocolType Inverse. when set the ProtocolType otherthan specified range is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterSrcIp 1.3.6.1.4.1.2272.1.23.15.11.1.22
Source IP address of the packet to be matched
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcDiagPcapFilterToSrcIp 1.3.6.1.4.1.2272.1.23.15.11.1.23
To Source IP address. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcDiagPcapFilterIsInverseSrcIp 1.3.6.1.4.1.2272.1.23.15.11.1.24
Source IP address Inverse. when set the source IP otherthan specified range is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterDstIp 1.3.6.1.4.1.2272.1.23.15.11.1.25
Destination IP address of the packet to be matched
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcDiagPcapFilterToDstIp 1.3.6.1.4.1.2272.1.23.15.11.1.26
To Destination IP address. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcDiagPcapFilterIsInverseDstIp 1.3.6.1.4.1.2272.1.23.15.11.1.27
Destination IP address Inverse. when set the Destination IP other than specified is range matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterDscp 1.3.6.1.4.1.2272.1.23.15.11.1.28
DSCP value of the packet to be matched
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

rcDiagPcapFilterToDscp 1.3.6.1.4.1.2272.1.23.15.11.1.29
To DSCP. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

rcDiagPcapFilterIsInverseDscp 1.3.6.1.4.1.2272.1.23.15.11.1.30
DSCP Inverse. when set the DSCP otherthan specified range is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterRowStatus 1.3.6.1.4.1.2272.1.23.15.11.1.31
Row Status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcDiagPcapFilterDscpMatchZero 1.3.6.1.4.1.2272.1.23.15.11.1.32
When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be default it would be set to FALSE
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapFilterPbitMatchZero 1.3.6.1.4.1.2272.1.23.15.11.1.33
When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be default it would be set to FALSE
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapAdvancedFilterTableSize 1.3.6.1.4.1.2272.1.23.15.12
Used to indicate the number of entries in the Filter table advanced parameter
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcDiagPcapAdvancedFilterTable 1.3.6.1.4.1.2272.1.23.15.13
A table used to store pcap secondary filters
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcDiagPcapAdvancedFilterEntry

rcDiagPcapAdvancedFilterEntry 1.3.6.1.4.1.2272.1.23.15.13.1
Pcap secondary Advanced filter desc
Status: current Access: not-accessible
OBJECT-TYPE    
  RcDiagPcapAdvancedFilterEntry  

rcDiagPcapAdvancedFilterId 1.3.6.1.4.1.2272.1.23.15.13.1.1
Unique ID that represents the filter
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000  

rcDiagPcapAdvancedFilterUdpPort 1.3.6.1.4.1.2272.1.23.15.13.1.2
UdpPort of the packet to be matched
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcDiagPcapAdvancedFilterToUdpPort 1.3.6.1.4.1.2272.1.23.15.13.1.3
To UdpPort. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcDiagPcapAdvancedFilterIsInverseUdpPort 1.3.6.1.4.1.2272.1.23.15.13.1.4
UdpPort Inverse. when set the UdpPort otherthan specified range is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapAdvancedFilterTcpPort 1.3.6.1.4.1.2272.1.23.15.13.1.5
TcpPort of the packet to be matched
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcDiagPcapAdvancedFilterToTcpPort 1.3.6.1.4.1.2272.1.23.15.13.1.6
To TcpPort. Used to specify a range
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcDiagPcapAdvancedFilterIsInverseTcpPort 1.3.6.1.4.1.2272.1.23.15.13.1.7
TcpPort Inverse. when set the TcpPort otherthan specified range is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapAdvancedFilterUserDefinedData 1.3.6.1.4.1.2272.1.23.15.13.1.8
User defined data to match with the packets received
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcDiagPcapAdvancedFilterUserDefinedDataSize 1.3.6.1.4.1.2272.1.23.15.13.1.9
Length of user defined data
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..50  

rcDiagPcapAdvancedFilterUserDefinedOffset 1.3.6.1.4.1.2272.1.23.15.13.1.10
Offset from which match has to start
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..9600  

rcDiagPcapAdvancedFilterIsInverseUserDefined 1.3.6.1.4.1.2272.1.23.15.13.1.11
TcpPort Inverse. when set the Userdata otherthan specified is matched
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcDiagPcapAdvancedFilterTimer 1.3.6.1.4.1.2272.1.23.15.13.1.12
Timer to start the pcap capture window in ms
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3600000  

rcDiagPcapAdvancedFilterPacketCount 1.3.6.1.4.1.2272.1.23.15.13.1.13
Number of packets to be captured before disabling pcap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcDiagPcapAdvancedFilterRefreshTimer 1.3.6.1.4.1.2272.1.23.15.13.1.14
Refresh timer in ms
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3600000  

rcDiagPcapAdvancedFilterRowStatus 1.3.6.1.4.1.2272.1.23.15.13.1.15
RowStatus
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcDiagPcapCopyFileName 1.3.6.1.4.1.2272.1.23.15.14
Used to indicate the file name. When set, the PCAP data from PCAP engine RAM is stored into this file in PCAP engine
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcDiagPcapResetStat 1.3.6.1.4.1.2272.1.23.15.15
To Reset PCAP statistics
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), resetStat(2)  

rcDiagPcapStatPacketCapacityCount 1.3.6.1.4.1.2272.1.23.15.16
Packet Capacity Count
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDiagPcapStatNumberOfPacketsReceived 1.3.6.1.4.1.2272.1.23.15.17
Number of packets received in PCAP engine
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDiagPcapStatNumberOfPacketsAccumulated 1.3.6.1.4.1.2272.1.23.15.18
Number of packets captured in PCAP engine
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDiagPcapStatNumberOfPacketsDroppedInPcapEngine 1.3.6.1.4.1.2272.1.23.15.19
Number of packets dropped in PCAP engine by filters
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDiagPcapStatNumberOfPacketsDroppedInHardware 1.3.6.1.4.1.2272.1.23.15.20
Number of packets dropped in Hardware
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rcDiagPcapDataValid 1.3.6.1.4.1.2272.1.23.15.21
A true/false value that indicate the return data whether is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcDiagPcapEtherTypeForSvlanLevel 1.3.6.1.4.1.2272.1.23.15.22
EtherType of svlan level.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 05dd..ffff