RAY-MIB
File:
RAY-MIB.mib (32880 bytes)
Imported modules
Imported symbols
Defined Types
ServiceState |
|
System service or device state. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
na(0), up(1), down(2) |
|
AlarmState |
|
Alarm status. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
na(0), up(1), down(2), ack(3) |
|
OptionSetting |
|
Setting of some options. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
na(0), on(1), off(2) |
|
ModulationList |
|
Radio channel modulations numerical list |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
na(0), qpsk(1), qam16(2), qam32(3), qam64(4), qam128(5), qam256(6) |
|
IfEthEntry |
|
SEQUENCE |
|
|
|
|
speed |
Integer32 |
|
|
duplex |
INTEGER |
|
|
mdix |
INTEGER |
|
|
autonego |
OptionSetting |
|
|
pause |
OptionSetting |
|
|
asymPause |
OptionSetting |
|
Defined Values
ray |
1.3.6.1.4.1.33555.1 |
The MIB module defines management objects for RAy product series. Revision 201610040000Z. |
MODULE-IDENTITY |
|
|
|
racom |
1.3.6.1.4.1.33555 |
OBJECT IDENTIFIER |
|
|
|
station |
1.3.6.1.4.1.33555.1.1 |
OBJECT IDENTIFIER |
|
|
|
interface |
1.3.6.1.4.1.33555.1.2 |
OBJECT IDENTIFIER |
|
|
|
statistic |
1.3.6.1.4.1.33555.1.3 |
OBJECT IDENTIFIER |
|
|
|
rayTraps |
1.3.6.1.4.1.33555.1.10 |
OBJECT IDENTIFIER |
|
|
|
ray2Traps |
1.3.6.1.4.1.33555.1.11 |
OBJECT IDENTIFIER |
|
|
|
product |
1.3.6.1.4.1.33555.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
info |
1.3.6.1.4.1.33555.1.1.2 |
OBJECT IDENTIFIER |
|
|
|
status |
1.3.6.1.4.1.33555.1.1.3 |
OBJECT IDENTIFIER |
|
|
|
chassis |
1.3.6.1.4.1.33555.1.1.4 |
OBJECT IDENTIFIER |
|
|
|
system |
1.3.6.1.4.1.33555.1.1.5 |
OBJECT IDENTIFIER |
|
|
|
access |
1.3.6.1.4.1.33555.1.1.6 |
OBJECT IDENTIFIER |
|
|
|
alarm |
1.3.6.1.4.1.33555.1.1.8 |
OBJECT IDENTIFIER |
|
|
|
productName |
1.3.6.1.4.1.33555.1.1.1.1 |
Product name. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
serialNumber |
1.3.6.1.4.1.33555.1.1.1.2 |
Product serial number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
unitType |
1.3.6.1.4.1.33555.1.1.1.3 |
Station type (L or H) and number of the Ethernet ports (1 or 2). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..4) |
|
deviceName |
1.3.6.1.4.1.33555.1.1.2.1 |
Station name. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
swVer |
1.3.6.1.4.1.33555.1.1.2.2 |
Firmware version. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
swVerRadio |
1.3.6.1.4.1.33555.1.1.2.3 |
Radio firmware version. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
systemStatus |
1.3.6.1.4.1.33555.1.1.3.1 |
Unit status. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), ok(1), warning(2), alarm(3) |
|
lineStatus |
1.3.6.1.4.1.33555.1.1.3.2 |
Radio link status. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), ok(1), analyzer(2), connecting(3), searching(4) |
|
peerNumber |
1.3.6.1.4.1.33555.1.1.3.3 |
Peer station serial number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
rfPowerStatus |
1.3.6.1.4.1.33555.1.1.3.4 |
RF Power amplifier OK/Failure. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), ok(1), fail(2) |
|
searchModeDisabled |
1.3.6.1.4.1.33555.1.1.3.5 |
Search mode disabled on/off. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
ethPeer |
1.3.6.1.4.1.33555.1.1.3.6 |
Peer station user Ethernet link status. Not supported by RAy2. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ServiceState |
|
|
securePeerMode |
1.3.6.1.4.1.33555.1.1.3.7 |
Secure peer mode. Not supported by RAy10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
lineStatusII |
1.3.6.1.4.1.33555.1.1.3.8 |
Radio link status. Not supported by RAy10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), setup(1), single(2), connecting(3), authorizing(4), ok(5), analyzer(6) |
|
eth1Link |
1.3.6.1.4.1.33555.1.1.3.9 |
Ethernet 1 link status. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ServiceState |
|
|
eth2Link |
1.3.6.1.4.1.33555.1.1.3.10 |
Ethernet 2 link status. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ServiceState |
|
|
temperatureModem |
1.3.6.1.4.1.33555.1.1.4.1 |
Modem temperature in hundredths of Celsius (C). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
temperatureRadio |
1.3.6.1.4.1.33555.1.1.4.2 |
Radio temperature in hundredths of Celsius (C). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
voltageUnit |
1.3.6.1.4.1.33555.1.1.4.3 |
Power supply voltage in tenths of Volts (V). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
voltageSource |
1.3.6.1.4.1.33555.1.1.4.4 |
Source of supply voltage. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), aux(1), poe(2) |
|
useCpu |
1.3.6.1.4.1.33555.1.1.5.1 |
System use CPU in %. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
useMemory |
1.3.6.1.4.1.33555.1.1.5.2 |
System use memory in %. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
useLogStorage |
1.3.6.1.4.1.33555.1.1.5.3 |
Use storage for log in %. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sshd |
1.3.6.1.4.1.33555.1.1.6.1 |
Management interface: SSH. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), onlykey(2), off(3) |
|
telnetd |
1.3.6.1.4.1.33555.1.1.6.2 |
Management interface: Telnet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
httpd |
1.3.6.1.4.1.33555.1.1.6.3 |
Management interface: HTTP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
ip |
1.3.6.1.4.1.33555.1.1.6.4 |
Management interface: IP address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mac |
1.3.6.1.4.1.33555.1.1.6.5 |
Management interface: MAC address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
managementVlan |
1.3.6.1.4.1.33555.1.1.6.6 |
Management interface: VLAN on/off. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
managementVlanId |
1.3.6.1.4.1.33555.1.1.6.7 |
Management interface: VLAN ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
wifiHAP |
1.3.6.1.4.1.33555.1.1.6.8 |
Management interface: WiFi Host Access Point. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
keyTable |
1.3.6.1.4.1.33555.1.1.7.1 |
List of product key entries. Supported by RAy10 only. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
KeyEntry |
|
keyEntry |
1.3.6.1.4.1.33555.1.1.7.1.1 |
Product key entry. Supported by RAy10 only. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
KeyEntry |
|
|
keyName |
1.3.6.1.4.1.33555.1.1.7.1.1.1 |
Product key name. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
alarmTemperature |
1.3.6.1.4.1.33555.1.1.8.1 |
Temperature alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmVoltageLow |
1.3.6.1.4.1.33555.1.1.8.2 |
Low voltage alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmVoltageHigh |
1.3.6.1.4.1.33555.1.1.8.3 |
High voltage alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmSnr |
1.3.6.1.4.1.33555.1.1.8.5 |
SNR alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmBer |
1.3.6.1.4.1.33555.1.1.8.6 |
BER alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmPeerDisconnected |
1.3.6.1.4.1.33555.1.1.8.7 |
Peer disconnect alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmEth1Down |
1.3.6.1.4.1.33555.1.1.8.8 |
Ethernet 1 Link Down alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmEth2Down |
1.3.6.1.4.1.33555.1.1.8.9 |
Ethernet 2 Link Down alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmRfPowerFail |
1.3.6.1.4.1.33555.1.1.8.10 |
RF Power Fail alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmNetBitrate |
1.3.6.1.4.1.33555.1.1.8.11 |
Air Speed below Limit alarm state. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmWifiOn |
1.3.6.1.4.1.33555.1.1.8.12 |
WiFi Host Access Oint on. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
ifRadio |
1.3.6.1.4.1.33555.1.2.1 |
OBJECT IDENTIFIER |
|
|
|
ifEth |
1.3.6.1.4.1.33555.1.2.2 |
OBJECT IDENTIFIER |
|
|
|
rxChannel |
1.3.6.1.4.1.33555.1.2.1.1 |
Receiver channel ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..8) |
|
txChannel |
1.3.6.1.4.1.33555.1.2.1.2 |
Transceiver channel ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..8) |
|
rxFreq |
1.3.6.1.4.1.33555.1.2.1.3 |
Receiver frequency in kHz. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
txFreq |
1.3.6.1.4.1.33555.1.2.1.4 |
Transceiver frequency in kHz. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
bandwidth |
1.3.6.1.4.1.33555.1.2.1.9 |
Radio channel bandwidth. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), bw-28MHz(1), bw-14MHz(2), bw-7MHz(3) |
|
coding |
1.3.6.1.4.1.33555.1.2.1.10 |
Channel coding level. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), low(1), hi(2) |
|
matching |
1.3.6.1.4.1.33555.1.2.1.11 |
Channel matching. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
netBitrate |
1.3.6.1.4.1.33555.1.2.1.13 |
Current net bitrate in kbps. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
maxNetBitrate |
1.3.6.1.4.1.33555.1.2.1.14 |
Maximum net bitrate in Mbps. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
bandwidthKHz |
1.3.6.1.4.1.33555.1.2.1.15 |
Radio channel bandwidth in kHz. Not supported by RAy10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
channelArrangement |
1.3.6.1.4.1.33555.1.2.1.16 |
Channel arrangement. Not supported by RAy10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), accp(1), acap(2), ccdp(3) |
|
rfPowerCurrent |
1.3.6.1.4.1.33555.1.2.1.17 |
Current RF Power in dBm. Not supported by RAy10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ifEthTable |
1.3.6.1.4.1.33555.1.2.2.1 |
List of Ethernet interfaces. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
IfEthEntry |
|
ifEthEntry |
1.3.6.1.4.1.33555.1.2.2.1.1 |
Ethernet interface entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IfEthEntry |
|
|
speed |
1.3.6.1.4.1.33555.1.2.2.1.1.1 |
Ethernet speed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..1000000000 |
|
duplex |
1.3.6.1.4.1.33555.1.2.2.1.1.2 |
Ethernet duplex. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), full(1), half(2) |
|
mdix |
1.3.6.1.4.1.33555.1.2.2.1.1.3 |
Ethernet MDI-X / MDI. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), mdi(1), mdi-x(2) |
|
autonego |
1.3.6.1.4.1.33555.1.2.2.1.1.4 |
Ethernet autonego. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
pause |
1.3.6.1.4.1.33555.1.2.2.1.1.5 |
Ethernet pause. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
asymPause |
1.3.6.1.4.1.33555.1.2.2.1.1.6 |
Ethernet asymmetric pause. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
prioritized |
1.3.6.1.4.1.33555.1.2.2.2 |
Ethernet prioritized VLAN support. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
vlanId |
1.3.6.1.4.1.33555.1.2.2.3 |
Ethernet prioritized VLAN ID. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
serviceVlanId |
1.3.6.1.4.1.33555.1.2.2.4 |
Ethernet service VLAN ID between local and remote station. Not supported by RAy2. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
modemR |
1.3.6.1.4.1.33555.1.3.1 |
OBJECT IDENTIFIER |
|
|
|
radio |
1.3.6.1.4.1.33555.1.3.2 |
OBJECT IDENTIFIER |
|
|
|
ethernet |
1.3.6.1.4.1.33555.1.3.3 |
OBJECT IDENTIFIER |
|
|
|
rxPauseFrames |
1.3.6.1.4.1.33555.1.3.1.1 |
Number of received Control frames with a valid PAUSE op-code. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxControlFrames |
1.3.6.1.4.1.33555.1.3.1.2 |
Number of received Control frames. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxBroadcast |
1.3.6.1.4.1.33555.1.3.1.3 |
Number of received packets with a broadcast destination address. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxMulticast |
1.3.6.1.4.1.33555.1.3.1.4 |
Number of received packets with a multicast destination address. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxDones |
1.3.6.1.4.1.33555.1.3.1.5 |
Number of successfully received packets. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxOutOfRangeErrors |
1.3.6.1.4.1.33555.1.3.1.6 |
Number of received frames larger than 1518 bytes (the frame Type/Length field is indicating a value larger than 1518 bytes). Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxCrcErrors |
1.3.6.1.4.1.33555.1.3.1.7 |
Number of received frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxCodeErrors |
1.3.6.1.4.1.33555.1.3.1.8 |
Number of received packets with one or more erroneous nibbles. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxFalseCarrierErrors |
1.3.6.1.4.1.33555.1.3.1.9 |
Rx false carrier errors. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxDroppedPkts |
1.3.6.1.4.1.33555.1.3.1.10 |
Number of dropped packets. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rxHCBytes |
1.3.6.1.4.1.33555.1.3.1.11 |
Number of received bytes. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
txPauseFrames |
1.3.6.1.4.1.33555.1.3.1.12 |
Number of transmitted Control frames with a valid PAUSE op-code. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
txControlFrames |
1.3.6.1.4.1.33555.1.3.1.13 |
Number of transmitted Control frames. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
txBroadcast |
1.3.6.1.4.1.33555.1.3.1.14 |
Number of transmitted packets with a broadcast destination address. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
txMulticast |
1.3.6.1.4.1.33555.1.3.1.15 |
Number of transmitted packets with a multicast destination address. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
txDones |
1.3.6.1.4.1.33555.1.3.1.16 |
Number of successfully transmitted packets. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
txLengthCheckErrors |
1.3.6.1.4.1.33555.1.3.1.17 |
Number of transmitted packets with the frame Length field (not a Type field) value that does not match the actual data byte length. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
txCrcErrors |
1.3.6.1.4.1.33555.1.3.1.18 |
Number of transmitted frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
txCollisions |
1.3.6.1.4.1.33555.1.3.1.19 |
Tx collisions. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
txHCBytes |
1.3.6.1.4.1.33555.1.3.1.20 |
Number of transmitted bytes. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
snr |
1.3.6.1.4.1.33555.1.3.2.2 |
Receiving SNR indicator in decimal dB (39 -> 3,9). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fecBlockCounter |
1.3.6.1.4.1.33555.1.3.2.3 |
Total block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
fecUncorrectBlockCounter |
1.3.6.1.4.1.33555.1.3.2.4 |
Incorrect block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
timeAllConnect |
1.3.6.1.4.1.33555.1.3.2.5 |
Overall link uptime. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
timeMaxDisconnect |
1.3.6.1.4.1.33555.1.3.2.7 |
The longest drop (disconnecting). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
numDisconnect |
1.3.6.1.4.1.33555.1.3.2.8 |
Number of drops (disconnecting). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
reliability |
1.3.6.1.4.1.33555.1.3.2.9 |
Reliability in thousandths of %. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
linkUptime |
1.3.6.1.4.1.33555.1.3.2.10 |
Current radio link uptime. Not supported by RAy10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
ber |
1.3.6.1.4.1.33555.1.3.2.11 |
Bit Error Rate (BER) multiplied by 10^9. Not supported by RAy10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ethInThroughput |
1.3.6.1.4.1.33555.1.3.3.1 |
Input Ethernet 1 data port throughput in kbps. Not supported by RAy10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ethOutThroughput |
1.3.6.1.4.1.33555.1.3.3.2 |
Output Ethernet 1 data port throughput in kbps. Not supported by RAy10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2InThroughput |
1.3.6.1.4.1.33555.1.3.3.3 |
Input Ethernet 2 data port throughput in kbps. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2OutThroughput |
1.3.6.1.4.1.33555.1.3.3.4 |
Output Ethernet 2 data port throughput in kbps. Supported by RAy2 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
airDisconnect |
1.3.6.1.4.1.33555.1.10.1 |
Air line disconnected. Not supported by RAy2. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
airConnect |
1.3.6.1.4.1.33555.1.10.2 |
Air line connected after being disconnected. Not supported by RAy2. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
airWdog |
1.3.6.1.4.1.33555.1.10.3 |
Air watch dog. Supported by RAy10 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tempAlarm |
1.3.6.1.4.1.33555.1.10.4 |
Temperature exceeded the threshold. Not supported by RAy2. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
powerAlarm |
1.3.6.1.4.1.33555.1.10.5 |
Power voltage is out of the thresholds. Not supported by RAy2. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
memoryAlarm |
1.3.6.1.4.1.33555.1.10.6 |
Memory use exceeded the threshold. Supported by RAy10 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
snrAlarm |
1.3.6.1.4.1.33555.1.10.8 |
SNR exceeded the threshold. Not supported by RAy2. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
berAlarm |
1.3.6.1.4.1.33555.1.10.9 |
BER exceeded the threshold. Not supported by RAy2. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rfPowerFail |
1.3.6.1.4.1.33555.1.10.10 |
RF Power amplifier failure. Not supported. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
peerEthLinkDown |
1.3.6.1.4.1.33555.1.10.11 |
Peer station Ethernet link Up/Down. Not supported by RAy2. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2TemperatureAlarm |
1.3.6.1.4.1.33555.1.11.1 |
Temperature exceeded the threshold. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2VoltageLowAlarm |
1.3.6.1.4.1.33555.1.11.2 |
Supply voltage below minimal threshold. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2VoltageHighAlarm |
1.3.6.1.4.1.33555.1.11.3 |
Supply voltage above maximal threshold. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2SnrAlarm |
1.3.6.1.4.1.33555.1.11.5 |
SNR exceeded the threshold. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2BerAlarm |
1.3.6.1.4.1.33555.1.11.6 |
BER exceeded the threshold. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2AirDisconnect |
1.3.6.1.4.1.33555.1.11.7 |
Air line disconnected. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2AirConnect |
1.3.6.1.4.1.33555.1.11.8 |
Air line connected after being disconnected. Supported by RAy2 (up to fw 2.1.7.0) only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2Eth1LinkDown |
1.3.6.1.4.1.33555.1.11.9 |
Local station Ethernet 1 link Up/Down. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2Eth21LinkDown |
1.3.6.1.4.1.33555.1.11.10 |
Local station Ethernet 2 link Up/Down. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2RfPowerFail |
1.3.6.1.4.1.33555.1.11.11 |
RF Power amplifier failure. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2NetBitrate |
1.3.6.1.4.1.33555.1.11.12 |
Air speed below threshold. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr2WifiOn |
1.3.6.1.4.1.33555.1.11.13 |
WiFi Host Access Point is on. Supported by RAy2 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|