RADLAN-Tuning
File:
RADLAN-Tuning.mib (48445 bytes)
Imported modules
Imported symbols
Defined Types
RsDiagnosticsEntry |
|
SEQUENCE |
|
|
|
|
rsDiagnosticsRequestId |
INTEGER |
|
|
rsDiagnosticsCode |
INTEGER |
|
|
rsDiagnosticsLocation |
INTEGER |
|
|
rsDiagnosticsText |
DisplayString |
|
EventMessageEntry |
|
SEQUENCE |
|
|
|
|
eventNum |
INTEGER |
|
|
eventDesc |
DisplayString |
|
RlTuningParamsEntry |
|
SEQUENCE |
|
|
|
|
rlTuningParamsName |
DisplayString |
|
|
rlTuningParamsCurrentValue |
INTEGER |
|
|
rlTuningParamsAfterResetValue |
INTEGER |
|
|
rlTuningParamsDefaultValue |
INTEGER |
|
|
rlTuningParamsMinimalValue |
INTEGER |
|
|
rlTuningParamsMaximalValue |
INTEGER |
|
RlHostParamEntry |
|
SEQUENCE |
|
|
|
|
rlHostParamName |
DisplayString |
|
|
rlHostParamValue |
INTEGER |
|
Defined Values
rsTunning |
1.3.6.1.4.1.89.29 |
The private MIB module definition for RND device tuning MIB. |
MODULE-IDENTITY |
|
|
|
rsHighPriority |
1.3.6.1.4.1.89.29.1 |
This variable indicates the time interval the forwarding task inside the
RS works in High Priority Mode. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsLowPriority |
1.3.6.1.4.1.89.29.2 |
This variable indicates the time interval the forwarding task inside the
RS works in Low Priority Mode. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsDbgLevel |
1.3.6.1.4.1.89.29.3 |
This variable indicates the debug level the Router Server works.
the range of this variable is 1..100 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsDiagnosticsEntry |
1.3.6.1.4.1.89.29.4.1 |
The row definition for this table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RsDiagnosticsEntry |
|
|
rsDiagnosticsRequestId |
1.3.6.1.4.1.89.29.4.1.1 |
The request id of the rejected SNMP request whose diagnostics are
specified by this entry. If request id 0xFFFFFFFF is given,
the diagnostic of the last rejected SNMP
request sent by the querying NMS is returned. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsDiagnosticsCode |
1.3.6.1.4.1.89.29.4.1.2 |
The code of the rejected the SNMP request whose diagnostics are
specified by this entry. This code may be used to find out the reason
for rejection if the diagnostic text is unavailable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsDiagnosticsLocation |
1.3.6.1.4.1.89.29.4.1.3 |
The internal location in the SW rejecting the SNMP request whose
diagnostics are specified by this entry. This information is available
for debugging purposes only and will be returned in GET requests only if
rsDbgLevel >= 99. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsDiagnosticsText |
1.3.6.1.4.1.89.29.4.1.4 |
The diagnostic text of the rejected SNMP request whose diagnostics are
specified by this entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..160) |
|
rsConfirmMessagTab |
1.3.6.1.4.1.89.29.5 |
This variable enables the operator to confirm all the message in the
event Message Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
eventMessageEntry |
1.3.6.1.4.1.89.29.6.1 |
The row definition for this table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EventMessageEntry |
|
|
eventNum |
1.3.6.1.4.1.89.29.6.1.1 |
The event number,the index of this table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
eventDesc |
1.3.6.1.4.1.89.29.6.1.2 |
The event discription, this text will include time and severity. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
reaIpForwardEnable |
1.3.6.1.4.1.89.29.7.4 |
The Platform will perform fast IP forwarding if only if this
variable's value is enable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
reaIpxForwardEnable |
1.3.6.1.4.1.89.29.7.5 |
The Platform will perform fast IPX forwarding if only if this
variable's value is enable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
rsMaxBrgFrwEntries |
1.3.6.1.4.1.89.29.8.1.1 |
Maximal number of entries in bridge forwarding table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxBrgFrwEntriesAfterReset |
1.3.6.1.4.1.89.29.8.1.2 |
Future maximal number of entries in bridge forwarding table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpFrwEntries |
1.3.6.1.4.1.89.29.8.2.1 |
Maximal number of entries in Ip forwarding table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpFrwEntriesAfterReset |
1.3.6.1.4.1.89.29.8.2.2 |
Future maximal number of entries in Ip forwarding table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxArpEntries |
1.3.6.1.4.1.89.29.8.3.1 |
Maximal number of entries in Arp forwarding table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxArpEntriesAfterReset |
1.3.6.1.4.1.89.29.8.3.2 |
Future maximal number of entries in Arp forwarding table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxFrwEntries |
1.3.6.1.4.1.89.29.8.4.1 |
Maximal number of entries in Ipx forwarding table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxFrwEntriesAfterReset |
1.3.6.1.4.1.89.29.8.4.2 |
Future maximal number of entries in Ipx forwarding table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxSapEntries |
1.3.6.1.4.1.89.29.8.5.1 |
Maximal number of entries in IpxSap table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxSapEntriesAfterReset |
1.3.6.1.4.1.89.29.8.5.2 |
Future maximal number of entries in IpxSap table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDspClntEntries |
1.3.6.1.4.1.89.29.8.6.1 |
Maximal number of entries in rsSdClientsTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDspClntEntriesAfterReset |
1.3.6.1.4.1.89.29.8.6.2 |
Future maximal number of entries in rsSdClientsTable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpSFftEntries |
1.3.6.1.4.1.89.29.8.9.1 |
The current maximal size of one IP SFFT Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpSFftEntriesAfterReset |
1.3.6.1.4.1.89.29.8.9.2 |
The future (after reset) maximal size of one IP SFFT Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpNFftEntries |
1.3.6.1.4.1.89.29.8.9.3 |
The current maximal size of one IP NFFT Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpNFftEntriesAfterReset |
1.3.6.1.4.1.89.29.8.9.4 |
The future (after reset) maximal size of one IP NFFT Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpSFftSysEntries |
1.3.6.1.4.1.89.29.8.9.5 |
The current maximal size of the SYSTEM IP SFFT Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpSFftSysEntriesAfterReset |
1.3.6.1.4.1.89.29.8.9.6 |
The future (after reset) maximal size of the SYSTEM IP SFFT Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpNFftSysEntries |
1.3.6.1.4.1.89.29.8.9.7 |
The current maximal size of the SYSTEM IP NFFT Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpNFftSysEntriesAfterReset |
1.3.6.1.4.1.89.29.8.9.8 |
The future (after reset) maximal size of the SYSTEM IP NFFT Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpNextHopEntries |
1.3.6.1.4.1.89.29.8.9.9 |
The current maximal size of one IP NextHop Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpNextHopEntriesAfterReset |
1.3.6.1.4.1.89.29.8.9.10 |
The future (after reset) maximal size of one NextHop Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxSFftEntries |
1.3.6.1.4.1.89.29.8.10.1 |
The current maximal size of one IPX SFFT Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxSFftEntriesAfterReset |
1.3.6.1.4.1.89.29.8.10.2 |
The future (after reset) maximal size of one IPX SFFT Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxNFftEntries |
1.3.6.1.4.1.89.29.8.10.3 |
The current maximal size of one IPX NFFT Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxNFftEntriesAfterReset |
1.3.6.1.4.1.89.29.8.10.4 |
The future (after reset) maximal size of one IPX NFFT Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxSFftSysEntries |
1.3.6.1.4.1.89.29.8.10.5 |
The current maximal size of the SYSTEM IPX SFFT Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxSFftSysEntriesAfterReset |
1.3.6.1.4.1.89.29.8.10.6 |
The future (after reset) maximal size of the SYSTEM IPX SFFT Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxNFftSysEntries |
1.3.6.1.4.1.89.29.8.10.7 |
The current maximal size of the SYSTEM IPX NFFT Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpxNFftSysEntriesAfterReset |
1.3.6.1.4.1.89.29.8.10.8 |
The future (after reset) maximal size of the SYSTEM IPX NFFT Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDhcpConns |
1.3.6.1.4.1.89.29.8.11.1 |
The current maximal number of DHCP connections. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDhcpConnsAfterReset |
1.3.6.1.4.1.89.29.8.11.2 |
The future (after reset) maximal number of DHCP connections. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpmFftEntries |
1.3.6.1.4.1.89.29.8.12.1.1 |
The current maximal number of the IPM FFT Tables. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpmFftEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.1.2 |
The future (after reset) maximal number of the IPM FFT Tables. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsIpmFftAging |
1.3.6.1.4.1.89.29.8.12.1.3 |
The aging timeout of the IPM FFT Tables. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIgmpInterfaceEntries |
1.3.6.1.4.1.89.29.8.12.2.1 |
Maximal number of entries in the IGMP Neighbor Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIgmpInterfaceEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.2.2 |
Future maximal number of entries in the IGMP Neighbor Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIgmpCacheEntries |
1.3.6.1.4.1.89.29.8.12.2.3 |
Maximal number of entries in the IGMP Cache Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIgmpCacheEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.2.4 |
Future maximal number of entries in the IGMP Cache Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimNeighborEntries |
1.3.6.1.4.1.89.29.8.12.3.1 |
Maximal number of entries in the PIM Neighbor Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimNeighborEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.3.2 |
Future maximal number of entries in the PIM Neighbor Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimRouteEntries |
1.3.6.1.4.1.89.29.8.12.3.3 |
Maximal number of entries in the PIM Route Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimRouteEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.3.4 |
Future maximal number of entries in the PIM Route Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimRouteNextHopEntries |
1.3.6.1.4.1.89.29.8.12.3.5 |
Maximal number of entries in the PIM Route Next Hop Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimRouteNextHopEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.3.6 |
Future maximal number of entries in the PIM Route Next Hop Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimInterfaceEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.3.7 |
Future maximal number of interfaces in the PIM Interface Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimInterfaceEntries |
1.3.6.1.4.1.89.29.8.12.3.8 |
Maximal number of interfaces in the PIM Interface Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDvmrpNeighborEntries |
1.3.6.1.4.1.89.29.8.12.4.1 |
Maximal number of entries in the Dvmrp Neighbor Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDvmrpNeighborEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.4.2 |
Future maximal number of entries in the Dvmrp Neighbor Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDvmrpRouteEntries |
1.3.6.1.4.1.89.29.8.12.4.3 |
Maximal number of entries in the Dvmrp Route Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDvmrpRouteEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.4.4 |
Future maximal number of entries in the Dvmrp Route Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDvmrpMRouteEntries |
1.3.6.1.4.1.89.29.8.12.4.5 |
Maximal number of entries in the Dvmrp Multicast Route Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDvmrpMRouteEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.4.6 |
Future maximal number of entries in the Dvmrp Multicast Route Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDvmrpInterfaceEntries |
1.3.6.1.4.1.89.29.8.12.4.7 |
Maximal number of interfaces in the Dvmrp Interface Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxDvmrpInterfaceEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.4.8 |
Future maximal number of interfaces in the Dvmrp Interface Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPigmpRouteEntries |
1.3.6.1.4.1.89.29.8.12.5.1 |
Maximal number of entries in the IGMP Proxy Routing Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPigmpRouteEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.5.2 |
Future maximal number of entries in the IGMP Proxy Routing Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimSmNeighborEntries |
1.3.6.1.4.1.89.29.8.12.6.1 |
Maximal number of entries in the PIM Neighbor Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimSmNeighborEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.6.2 |
Future maximal number of entries in the PIM Neighbor Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimSmRouteEntries |
1.3.6.1.4.1.89.29.8.12.6.3 |
Maximal number of entries in the PIM Route Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimSmRouteEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.6.4 |
Future maximal number of entries in the PIM Route Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimSmInterfaceEntries |
1.3.6.1.4.1.89.29.8.12.6.5 |
Maximal number of entries in the PIM Interface Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimSmRPSetEntries |
1.3.6.1.4.1.89.29.8.12.6.7 |
Maximal number of entries in the RPSet Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimSmRPSetEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.6.8 |
Future maximal number of entries in the RPSet Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimSmCRPEntries |
1.3.6.1.4.1.89.29.8.12.6.9 |
Maximal number of entries in the RPSet Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPimSmCRPEntriesAfterReset |
1.3.6.1.4.1.89.29.8.12.6.10 |
Future maximal number of entries in the RPSet Table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxNumberRpAddresesInGroupRange |
1.3.6.1.4.1.89.29.8.12.6.11 |
Maximal number of rp addresses per group range in the RPSet Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxRmonLogEntries |
1.3.6.1.4.1.89.29.8.13.1 |
Maximal number of entries in RMON Log table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxRmonLogEntriesAfterReset |
1.3.6.1.4.1.89.29.8.13.2 |
Future maximal number of entries in RMON Log table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxRmonEtherHistoryEntries |
1.3.6.1.4.1.89.29.8.13.3 |
Maximal number of entries in RMON EtherHistory table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxRmonEtherHistoryEntriesAfterReset |
1.3.6.1.4.1.89.29.8.13.4 |
Future maximal number of entries in RMON EtherHistory table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIgmpSnoopGroupEntries |
1.3.6.1.4.1.89.29.8.14.1 |
The maximum number of entries in the IGMP Snooping group table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIgmpSnoopGroupEntriesAfterReset |
1.3.6.1.4.1.89.29.8.14.2 |
Future maximal number of entries in the IGMP Snooping group table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxVlansEntries |
1.3.6.1.4.1.89.29.8.15.1 |
The maximum number of entries in the VLANs table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxVlansEntriesAfterReset |
1.3.6.1.4.1.89.29.8.15.2 |
Future maximal number of entries in the VLANs table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxPolicyMaxRulesEntries |
1.3.6.1.4.1.89.29.8.16.1 |
Maximal number of entries in the Policy Route Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxGvrpVlans |
1.3.6.1.4.1.89.29.8.17.1 |
The maximum number of VLANs that can participant in Gvrp. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxGvrpVlansAfterReset |
1.3.6.1.4.1.89.29.8.17.2 |
Future maximal number of VLANs that can participant in Gvrp. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxTraceRouteControlEntries |
1.3.6.1.4.1.89.29.8.18.1 |
The maximum number of trace route control entries. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxTraceRouteProbeHistoryEntries |
1.3.6.1.4.1.89.29.8.18.3 |
The maximum number of trace route probe history entries. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxTraceRouteProbeHistoryEntriesAfterReset |
1.3.6.1.4.1.89.29.8.18.4 |
Future maximum number of trace route probe history entries. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxNumberOfSockets |
1.3.6.1.4.1.89.29.8.20.1 |
Maximal number of sockets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxSizeOfSocketDataPool |
1.3.6.1.4.1.89.29.8.20.3 |
Maximal size of socket data pool. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpPrefixes |
1.3.6.1.4.1.89.29.8.21.1 |
Maximal number of IP prefixes that router supports. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpPrefixesAfterReset |
1.3.6.1.4.1.89.29.8.21.2 |
FutureMaximal number of IP prefixes that router supports. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpNextHopSetEntries |
1.3.6.1.4.1.89.29.8.22.1 |
Maximal number of NextHops that may be
used for forwarding for a destinaton. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpNextHopSetEntriesAfterReset |
1.3.6.1.4.1.89.29.8.22.2 |
FutureMaximal number of NextHops that may be
used for forwarding for a destinaton. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpEcmpEntrySize |
1.3.6.1.4.1.89.29.8.23.1 |
Maximum number of ECMP Sets for forwarding. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpEcmpEntrySizeAfterReset |
1.3.6.1.4.1.89.29.8.23.2 |
FutureMaximum number of ECMP Sets for forwarding. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxdot1xEapRequestEntries |
1.3.6.1.4.1.89.29.8.24.1 |
The maximum number of eap request packets entries that
can be retransmitted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxdot1xEapRequestEntriesAfterReset |
1.3.6.1.4.1.89.29.8.24.2 |
Future maximum number of eap request packets entries that
can be retransmitted. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpInterfaces |
1.3.6.1.4.1.89.29.8.25.1 |
Maximal number of IP interfaces.
Applies to inBand IP interfaces. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMaxIpInterfacesAfterReset |
1.3.6.1.4.1.89.29.8.25.2 |
FutureMaximal number of IP interfaces.
Applies to inBand IP interfaces. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsTcpMemoryPoolSizeAfterReset |
1.3.6.1.4.1.89.29.11.1 |
The size of the memory pool that the tcp will allocate after reset.
The memory pool is used for sending packets |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsTcpMemoryPoolSize |
1.3.6.1.4.1.89.29.11.2 |
The size of the memory pool that the tcp uses currently.
The memory pool is used for sending packets |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsRadiusMemoryPoolSizeAfterReset |
1.3.6.1.4.1.89.29.12.1 |
The size of the memory pool that radius will allocate after reset.
The memory pool is used for attributes |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsRadiusMemoryPoolSize |
1.3.6.1.4.1.89.29.12.2 |
The size of the memory pool that radius uses currently.
The memory pool is used for attributes |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSyslogFilePercentToDeleteWhenCompacting |
1.3.6.1.4.1.89.29.13.3 |
When the flash file which is used by reports becomes full,
a certain percentage of the old messages on flash are deleted.
This is the current value. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
rlSyslogCacheSize |
1.3.6.1.4.1.89.29.13.5 |
The size of memory cache of last errors reported.
This cache is cyclic. This is the current value. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
rlSyslogCacheSizeAfterReset |
1.3.6.1.4.1.89.29.13.6 |
The size of memory cache of last errors reported.
This cache is cyclic. This is the value after reset. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
rlMaxNumberOfAccessRules |
1.3.6.1.4.1.89.29.14.1 |
The Maximum number of rules per Access List that can be defined |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxNumberOfAccessRulesAfterReset |
1.3.6.1.4.1.89.29.14.2 |
The Maximum number of rules per Access List for after reset tuning |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSshMaxAuthorizedKeysAfterReset |
1.3.6.1.4.1.89.29.15.1 |
The maximum amount of authorized user keys the SSH deamon will store
after reset. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSshMaxAuthorizedKeys |
1.3.6.1.4.1.89.29.15.2 |
The maximum amount of authorized user keys the SSH deamon stores
currently. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsDiagnosticTextSource |
1.3.6.1.4.1.89.29.16 |
The source from which SNMP diagnostics message texts should be
taken. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
fromCLI(1), fromDiagnosticsTable(2) |
|
rsMultiSessionMaxSessionsAfterReset |
1.3.6.1.4.1.89.29.17.1 |
The maximum number of terminal sessions (serial, telnet and ssh)
available after reset. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsMultiSessionMaxSessions |
1.3.6.1.4.1.89.29.17.2 |
The maximum number of terminal sessions (serial, telnet and ssh)
available. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxDnsClCacheRREntries |
1.3.6.1.4.1.89.29.18.1 |
The current maximal number of DNS client cache entries. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxDnsClCacheRREntriesAfterReset |
1.3.6.1.4.1.89.29.18.2 |
The future (after reset) maximal number of DNS client cache
entries. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxDnsClNCacheErrEntries |
1.3.6.1.4.1.89.29.18.3 |
The current maximal number of DNS client negative cache entries. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxDnsClNCacheErrEntriesAfterReset |
1.3.6.1.4.1.89.29.18.4 |
The future (after reset) maximal number of DNS client negative cache
entries. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxDnsClNamesEntries |
1.3.6.1.4.1.89.29.18.5 |
The current maximal number of DNS client static names entries. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxDnsClNamesEntriesAfterReset |
1.3.6.1.4.1.89.29.18.6 |
The future (after reset) maximal number of DNS client static names
entries. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlTuningParamsEntry |
1.3.6.1.4.1.89.29.19.1 |
Defines the contents of each line in the rlTuningParamsTable table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlTuningParamsEntry |
|
|
rlTuningParamsName |
1.3.6.1.4.1.89.29.19.1.1 |
Index to the rlTuningParamsTable.
name of current value Mib for this entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..80) |
|
rlTuningParamsCurrentValue |
1.3.6.1.4.1.89.29.19.1.2 |
This variable current value used in this run by the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlTuningParamsAfterResetValue |
1.3.6.1.4.1.89.29.19.1.3 |
This variable value that will be used in next run by the system.
i.e. the value will be effective after next reboot |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlTuningParamsDefaultValue |
1.3.6.1.4.1.89.29.19.1.4 |
This variable value that is used by the system as default. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlTuningParamsMinimalValue |
1.3.6.1.4.1.89.29.19.1.5 |
This variable value indicate minimum value.
this is the lower limit for editing the value after reset. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlTuningParamsMaximalValue |
1.3.6.1.4.1.89.29.19.1.6 |
This variable value indicate maximum value.
This is the upper limit for editing the value after reset. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlHostParamTable |
1.3.6.1.4.1.89.29.20 |
table to show tuning : limits curent and after reset values. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RlHostParamEntry |
|
rlHostParamEntry |
1.3.6.1.4.1.89.29.20.1 |
Defines the contents of each line in the rlHostParamTable table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlHostParamEntry |
|
|
rlHostParamName |
1.3.6.1.4.1.89.29.20.1.1 |
Index to the rlHostParamTable.
name of current value Mib for this entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..80) |
|
rlHostParamValue |
1.3.6.1.4.1.89.29.20.1.2 |
This variable current value used in this run by the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfInterfaces |
1.3.6.1.4.1.89.29.21.1 |
The current maximum number of ospf interfaces. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfInterfacesAfterReset |
1.3.6.1.4.1.89.29.21.2 |
The future (after reset) maximum number of ospf interfaces. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfAreas |
1.3.6.1.4.1.89.29.21.3 |
The current maximum number of ospf areas. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfAreasAfterReset |
1.3.6.1.4.1.89.29.21.4 |
The future (after reset) maximum number of ospf areas. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfNeighbors |
1.3.6.1.4.1.89.29.21.5 |
The current maximum number of ospf neighbors. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfNeighborsAfterReset |
1.3.6.1.4.1.89.29.21.6 |
The future (after reset) maximum number of ospf neighbors. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfAbrPerArea |
1.3.6.1.4.1.89.29.21.7 |
The current maximum number of ABR in ospf area. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfAbrPerAreaAfterReset |
1.3.6.1.4.1.89.29.21.8 |
The future (after reset) maximum number of ABR in ospf area. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfNetsInAs |
1.3.6.1.4.1.89.29.21.9 |
The current maximum number of networks in AS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlMaxOspfNetsInAsAfterReset |
1.3.6.1.4.1.89.29.21.10 |
The future (after reset) maximum number of networks in AS. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlVlanDefaultVID |
1.3.6.1.4.1.89.29.22.1 |
The default vlan vid. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlVlanDefaultVIDAfterReset |
1.3.6.1.4.1.89.29.22.2 |
The default vlan vid after rest |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlDependendFeaturesEnabled |
1.3.6.1.4.1.89.29.23.1 |
Current set of running features.
These features combinations may limit by
A. The same resource (such as ASIC module).
B. limitation of product or logic for combination
System limit is for up to 5 features
First implemented with 3. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BITS |
ipV4routingEnabled(0), policyBasedVlanEnabled(1), qualityOfServiceEnables(2) |
|
rlDependendFeaturesEnabledAfterReset |
1.3.6.1.4.1.89.29.23.2 |
Next system load (after reset) set of running features.
These features combinations limited by
A. The same resource (such as ASIC module).
B. Limitation of product or logic for combination (one feature override the other).
C. Per product some or all features status may not be changed.
System limit is for up to 5 features
First implemented with 3. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
BITS |
ipV4routingEnabled(0), policyBasedVlanEnabled(1), qualityOfServiceEnables(2) |
|