RAD-DS3-MIB
File:
RAD-DS3-MIB.mib (28060 bytes)
Imported modules
Imported symbols
Defined Types
PrtDs3IfEntry |
|
SEQUENCE |
|
|
|
|
prtDs3IfTimeElapsed |
Integer32 |
|
|
prtDs3IfValidIntervals |
Integer32 |
|
PrtDs3CurrentEntry |
|
SEQUENCE |
|
|
|
|
prtDs3CurrentLOS |
Gauge32 |
|
|
prtDs3CurrentOOF |
Gauge32 |
|
|
prtDs3CurrentLOC |
Gauge32 |
|
|
prtDs3CurrentAIS |
Gauge32 |
|
|
prtDs3CurrentRDI |
Gauge32 |
|
|
prtDs3CurrentUAS |
Gauge32 |
|
|
prtDs3CurrentBIP |
Gauge32 |
|
|
prtDs3CurrentFEBE |
Gauge32 |
|
|
prtDs3CurrentSLM |
Gauge32 |
|
|
prtDs3CurrentSES |
Gauge32 |
|
|
prtDs3CurrentES |
Gauge32 |
|
|
prtDs3CurrentBitParity |
Gauge32 |
|
|
prtDs3CurrentPlcpLOF |
Gauge32 |
|
|
prtDs3CurrentPlcpRAI |
Gauge32 |
|
|
prtDs3CurrentPlcpBIP |
Gauge32 |
|
|
prtDs3CurrentPlcpFEBE |
Gauge32 |
|
|
prtDs3CurrentBPV |
Gauge32 |
|
|
prtDs3CurrentLCE |
Gauge32 |
|
|
prtDs3CurrentStatus |
OCTET STRING |
|
PrtDs3IntervalEntry |
|
SEQUENCE |
|
|
|
|
prtDs3IntervalNumber |
Integer32 |
|
|
prtDs3IntervalLOS |
Gauge32 |
|
|
prtDs3IntervalOOF |
Gauge32 |
|
|
prtDs3IntervalLOC |
Gauge32 |
|
|
prtDs3IntervalAIS |
Gauge32 |
|
|
prtDs3IntervalRDI |
Gauge32 |
|
|
prtDs3IntervalUAS |
Gauge32 |
|
|
prtDs3IntervalBIP |
Gauge32 |
|
|
prtDs3IntervalFEBE |
Gauge32 |
|
|
prtDs3IntervalSLM |
Gauge32 |
|
|
prtDs3IntervalSES |
Gauge32 |
|
|
prtDs3IntervalES |
Gauge32 |
|
|
prtDs3IntervalBitParity |
Gauge32 |
|
|
prtDs3IntervalPlcpLOF |
Gauge32 |
|
|
prtDs3IntervalPlcpRAI |
Gauge32 |
|
|
prtDs3IntervalPlcpBIP |
Gauge32 |
|
|
prtDs3IntervalPlcpFEBE |
Gauge32 |
|
|
prtDs3IntervalBPV |
Gauge32 |
|
|
prtDs3IntervalLCE |
Gauge32 |
|
|
prtDs3IntervalStatus |
OCTET STRING |
|
PrtDs3TotalEntry |
|
SEQUENCE |
|
|
|
|
prtDs3TotalUAS |
Gauge32 |
|
|
prtDs3TotalBPV |
Gauge32 |
|
|
prtDs3TotalLCE |
Gauge32 |
|
|
prtDs3TotalSES |
Gauge32 |
|
Dsx3XConfigEntry |
|
SEQUENCE |
|
|
|
|
dsx3AisEnable |
INTEGER |
|
Defined Values
prtDs3PerfHistory |
1.3.6.1.4.1.164.3.1.6.3.1 |
OBJECT IDENTIFIER |
|
|
|
prtSDs3IfTable |
1.3.6.1.4.1.164.3.1.6.3.1.1 |
The DS3 interface table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PrtDs3IfEntry |
|
prtDs3IfEntry |
1.3.6.1.4.1.164.3.1.6.3.1.1.1 |
An entry in the DS3 interface table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PrtDs3IfEntry |
|
|
prtDs3IfTimeElapsed |
1.3.6.1.4.1.164.3.1.6.3.1.1.1.1 |
The number of seconds that have elapsed since
the beginning of the near end current error-
measurement period. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..899 |
|
prtDs3IfValidIntervals |
1.3.6.1.4.1.164.3.1.6.3.1.1.1.2 |
The number of previous near end intervals for
which valid data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complete 15 minute near end
intervals since the interface has been online. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..96 |
|
prtDs3CurrentEntry |
1.3.6.1.4.1.164.3.1.6.3.1.2.1 |
An entry in the DS3 Current table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PrtDs3CurrentEntry |
|
|
prtDs3CurrentLOS |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.1 |
The counter associated with the number of LOS
seconds, encountered by a DS3 interface in
the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentOOF |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.2 |
The counter associated with the number of OOF
seconds, encountered by a DS3
interface in the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentLOC |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.3 |
The counter associated with the number of LOC
seconds, encountered by a DS3
interface in the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentAIS |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.4 |
The counter associated with the number of AIS
seconds, encountered by a DS3
interface in the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentRDI |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.5 |
The counter associated with the number of RDI
seconds, encountered by a DS3
interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentUAS |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.6 |
The counter associated with the number of UAS,
encountered by a SONET interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentBIP |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.7 |
The counter associated with the number of
BIP errors, encountered by a DS3
interface in the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentFEBE |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.8 |
The counter associated with the number of
FEBE errors, encountered by a DS3
interface in the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentSLM |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.9 |
The counter associated with the number of SLM
seconds, encountered by an E3 (only )
interface in the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentSES |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.10 |
The counter associated with the number of SES
encountered by a E3
interface in the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentES |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.11 |
The number of Errored Seconds, encountered by a
DS3 interface in the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentBitParity |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.12 |
Bit Parity Error counter. Relevant to T3 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentPlcpLOF |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.13 |
The counter associated with the number of LOF
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. This counter is relevant for plcpInternal(5)
or plcpExternal(6) configuration If frame types only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentPlcpRAI |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.14 |
Receiving Yellow/Remote Alarm Indication. This counter is
relevant for PLCP (external/internal) frame types only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentPlcpBIP |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.15 |
The counter associated with the number of BIP errors,
encountered by a DS3 interface in the current 15 minute
interval. This counter is relevant for PLCP (external/internal)
frame types only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentPlcpFEBE |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.16 |
The counter associated with the number of FEBE
errors, encountered by a DS3 interface in the current
15 minute interval. This counter is relevant for PLCP
(external/internal) frame types only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentBPV |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.17 |
Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the current 15 minute interval.
This object is relevant only for Electrical Line
of Fomi-E3/T3. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentLCE |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.18 |
Number of LCE (Link Code Errors) encountered
by a DS3 interface in the current 15 minute interval.
This object is relevant only for Optical Links
of Fomi-E3/T3. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3CurrentStatus |
1.3.6.1.4.1.164.3.1.6.3.1.2.1.19 |
The statuses of the current interval:
0 - Valid.
1 - redundantLinkSwitch - the link has been switched
by a redundancy mechanism.
2 - discontinuity - module was partialy out.
4 - notValid - module is out. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(4) |
|
prtDs3IntervalEntry |
1.3.6.1.4.1.164.3.1.6.3.1.3.1 |
An entry in the DS3 Interval table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PrtDs3IntervalEntry |
|
|
prtDs3IntervalNumber |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.1 |
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..96 |
|
prtDs3IntervalLOS |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.2 |
The counter associated with the number of LOS
seconds , encountered by a DS3 interface in
one of the previous 96, individual 15 minute,
intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalOOF |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.3 |
The counter associated with the number of OOF
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalLOC |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.4 |
The counter associated with the number of LOC
seconds, encountered by a DS3
interface in one of the previous 96,
individual 15 minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalAIS |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.5 |
The counter associated with the number of AIS
seconds, encountered by a SONET
interface in one of the previous 96, individual 15
minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalRDI |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.6 |
The counter associated with the number of RDI
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalUAS |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.7 |
The counter associated with the number of UAS,
encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalBIP |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.8 |
The counter associated with the number of
BIP errors, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalFEBE |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.9 |
The counter associated with the number of
FEBE errors, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalSLM |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.10 |
The counter associated with the number of SLM
seconds, encountered by an E3
interface in one of the previous 96, individual 15
minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalSES |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.11 |
The counter associated with the number of SES
encountered by a E3
interface in one of the previous 96, individual 15
minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalES |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.12 |
The number of Errored Seconds, encountered by a
DS3 interface in one of the previous 96, individual 15
minute, intervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalBitParity |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.13 |
Bit Parity Error counter. Relevant to T3 only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalPlcpLOF |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.14 |
The counter associated with the number of LOF
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. This counter is relevant for plcpInternal(5)
or plcpExternal(6) configuration If frame types only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalPlcpRAI |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.15 |
Receiving Yellow/Remote Alarm Indication. This counter is
relevant for PLCP (external/internal) frame types only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalPlcpBIP |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.16 |
The counter associated with the number of BIP errors,
encountered by a DS3 interface in the current 15 minute
interval. This counter is relevant for PLCP (external/internal)
frame types only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalPlcpFEBE |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.17 |
The counter associated with the number of FEBE
errors, encountered by a DS3 interface in the current
15 minute interval. This counter is relevant for PLCP
(external/internal) frame types only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalBPV |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.18 |
Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the specified 15 minute interval.
This object is relevant only for Electrical Line
of Fomi-E3/T3. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalLCE |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.19 |
Number of LCE (Link Code Errors) encountered
by a DS3 interface in the specified 15 minute interval.
This object is relevant only for Optical Links
of Fomi-E3/T3. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3IntervalStatus |
1.3.6.1.4.1.164.3.1.6.3.1.3.1.20 |
The statuses of the current interval:
0 - Valid.
1 - redundantLinkSwitch - the link has been switched
by a redundancy mechanism.
2 - discontinuity - module was partialy out.
4 - notValid - module is out. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(4) |
|
prtDs3TotalEntry |
1.3.6.1.4.1.164.3.1.6.3.1.4.1 |
An entry of Total table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PrtDs3TotalEntry |
|
|
prtDs3TotalUAS |
1.3.6.1.4.1.164.3.1.6.3.1.4.1.6 |
Number of UASs (Unavailable Seconds) , encountered by a
DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3TotalBPV |
1.3.6.1.4.1.164.3.1.6.3.1.4.1.17 |
Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3TotalLCE |
1.3.6.1.4.1.164.3.1.6.3.1.4.1.18 |
Number of LCE (Link Code Errors) encountered
by a DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
prtDs3TotalSES |
1.3.6.1.4.1.164.3.1.6.3.1.4.1.19 |
Number of SES (Severely Errored Seconds) encountered
by a DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
dsx3XConfigTable |
1.3.6.1.4.1.164.3.1.6.3.2 |
An extension to the DS3 Configuration table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Dsx3XConfigEntry |
|
dsx3XConfigEntry |
1.3.6.1.4.1.164.3.1.6.3.2.1 |
An entry containing additional configuration
parameters. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Dsx3XConfigEntry |
|
|
dsx3AisEnable |
1.3.6.1.4.1.164.3.1.6.3.2.1.1 |
Enable/ disable AIS transmit when Ethernet (for TDMoIP) line is disconnected. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notApplicable(1), disable(2), enable(3) |
|