RAD-BROADBAND-IF-MIB
File:
RAD-BROADBAND-IF-MIB.mib (45597 bytes)
Imported modules
Imported symbols
Defined Types
| PrtBdbandIndEntry |
|
| SEQUENCE |
|
|
|
| |
prtBdbandCnfgIdx |
Integer32 |
|
| |
prtBdbandIdx |
Integer32 |
|
| |
prtBdbandIndSig |
INTEGER |
|
| |
prtBdbandIndEvent |
INTEGER |
|
| |
prtBdbandIndSigEnable |
INTEGER |
|
| |
prtBdbandRowStatus |
RowStatus |
|
| PrtPhyConfigEntry |
|
| SEQUENCE |
|
|
|
| |
prtPhyTimeElapsed |
Integer32 |
|
| |
prtPhyValidIntervals |
Integer32 |
|
| PrtPhyCurrentEntry |
|
| SEQUENCE |
|
|
|
| |
prtPhyCurrentLOS |
Gauge32 |
|
| |
prtPhyCurrentLSV |
Gauge32 |
|
| |
prtPhyCurrentUAS |
Gauge32 |
|
| |
prtPhyCurrentSES |
Gauge32 |
|
| |
prtPhyCurrentES |
Gauge32 |
|
| |
prtPhyCurrentStatus |
OCTET STRING |
|
| |
prtPhyCurrentLOF |
Gauge32 |
|
| PrtPhyIntervalEntry |
|
| SEQUENCE |
|
|
|
| |
prtPhyIntervalNumber |
Integer32 |
|
| |
prtPhyIntervalLOS |
Gauge32 |
|
| |
prtPhyIntervalLSV |
Gauge32 |
|
| |
prtPhyIntervalUAS |
Gauge32 |
|
| |
prtPhyIntervalSES |
Gauge32 |
|
| |
prtPhyIntervalES |
Gauge32 |
|
| |
prtPhyIntervalStatus |
OCTET STRING |
|
| |
prtPhyIntervalLOF |
Gauge32 |
|
| R2CnfgEntry |
|
| SEQUENCE |
|
|
|
| |
r2CnfgIdx |
Integer32 |
|
| |
r2CnfgProfileIdx |
Integer32 |
|
| |
r2Mode |
INTEGER |
|
| |
r2Country |
Integer32 |
|
| |
r2Delay |
INTEGER |
|
| |
r2MeteringInd |
INTEGER |
|
| |
r2BreakMakeRatio |
INTEGER |
|
| |
r2ReleaseGuardT2 |
Integer32 |
|
| |
r2Regret |
Integer32 |
|
| |
r2SeizeDetect |
Integer32 |
|
| |
r2SeizeAckDelay |
Integer32 |
|
| |
r2ClearBackDetect |
Integer32 |
|
| |
r2ClearFwdDetect |
Integer32 |
|
| |
r2FaultDetect |
Integer32 |
|
| |
r2FaultRemoveDetect |
Integer32 |
|
| |
r2MeterPulseDuration |
Integer32 |
|
| |
r2SeizeAckWait |
Integer32 |
|
| |
r2SeizeAckDetect |
Integer32 |
|
| |
r2AnswerDetect |
Integer32 |
|
| |
r2BlockRemoveDetect |
Integer32 |
|
| |
r2MeterPulseDetect |
Integer32 |
|
| |
r2ForcedDisconnect |
Integer32 |
|
| |
r2DisconnectAck |
Integer32 |
|
| |
r2ReleaseGuardT1 |
Integer32 |
|
| |
r2CnfgRowStatus |
RowStatus |
|
| R2TsEntry |
|
| SEQUENCE |
|
|
|
| |
r2TsCnfgIdx |
Integer32 |
|
| |
r2TsProfileIdx |
Integer32 |
|
| |
r2TsIdx |
Integer32 |
|
| |
r2TsCallEnable |
INTEGER |
|
| |
r2TsMetering |
INTEGER |
|
| |
r2TsRowStatus |
RowStatus |
|
| |
r2TsReversePolarity |
INTEGER |
|
| R2StatusEntry |
|
| SEQUENCE |
|
|
|
| |
r2StatusSlotIdx |
INTEGER |
|
| |
r2StatusPortIdx |
Integer32 |
|
| |
r2StatusTsIdx |
Integer32 |
|
| |
r2StatusSigDirection |
INTEGER |
|
| |
r2StatusTsState |
INTEGER |
|
| |
r2StatusProtocolState |
INTEGER |
|
| AtmLayer2XVclEntry |
|
| SEQUENCE |
|
|
|
| |
atmLayer2XVclConnMode |
INTEGER |
|
| |
atmLayer2XVclGroupIdx |
Integer32 |
|
| AtmLayer2GroupEntry |
|
| SEQUENCE |
|
|
|
| |
atmLayer2GroupIdx |
Integer32 |
|
| |
atmLayer2GroupRowStatus |
RowStatus |
|
| |
atmLayer2GroupConnMode |
INTEGER |
|
| |
atmLayer2GroupConnPriority |
OCTET STRING |
|
| |
atmLayer2GroupName |
SnmpAdminString |
|
| AtmLayer2PriorityEntry |
|
| SEQUENCE |
|
|
|
| |
atmLayer2PriorityGroupIdx |
Integer32 |
|
| |
atmLayer2PriorityRx |
Integer32 |
|
| |
atmLayer2PriorityIfIndex |
InterfaceIndex |
|
| |
atmLayer2PriorityVclVpi |
Integer32 |
|
| |
atmLayer2PriorityVclVci |
Integer32 |
|
| AtmLayer2CfgEntry |
|
| SEQUENCE |
|
|
|
| |
atmLayer2CfgBridgingMode |
INTEGER |
|
| |
atmLayer2CfgVlanMode |
INTEGER |
|
| |
atmLayer2CfgAtmAcceptableFrameType |
INTEGER |
|
| |
atmLayer2CfgAtmIngressFiltering |
TruthValue |
|
| |
atmLayer2CfgAtmTxFrameType |
INTEGER |
|
| |
atmLayer2CfgEthAcceptableFrameType |
INTEGER |
|
| |
atmLayer2CfgBridgeAction |
INTEGER |
|
| |
atmLayer2CfgLearningMode |
INTEGER |
|
| |
atmLayer2CfgAgingTime |
Integer32 |
|
| FrAtmIwfXConnectionEntry |
|
| SEQUENCE |
|
|
|
| |
frAtmIwfXConnMode |
INTEGER |
|
| |
frAtmIwfXConnSscsDlci |
Integer32 |
|
Defined Values
| prtPhyPerfHistory |
1.3.6.1.4.1.164.3.1.6.8.2 |
| OBJECT IDENTIFIER |
|
|
|
| prtBdbandIndEntry |
1.3.6.1.4.1.164.3.1.6.8.1.1.1 |
| An entry in the Indication Signal table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PrtBdbandIndEntry |
|
|
| prtBdbandCnfgIdx |
1.3.6.1.4.1.164.3.1.6.8.1.1.1.1 |
| This object indicates the Idx of the Agent Cnfg the following
objects refer.
255=Temporary Cnfg (when relevant, Set is done only to this configuration).
For Agents that support only one configuration, this object will be
constant=1. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..255 |
|
| prtBdbandIdx |
1.3.6.1.4.1.164.3.1.6.8.1.1.1.2 |
| This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| prtBdbandIndSig |
1.3.6.1.4.1.164.3.1.6.8.1.1.1.3 |
| This object indicates a unique Indication Signal.
ais(1) = AIS = Alarm Indication Signal.
rdi(2) = RDI = Remote Defect Indication. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ais(1), rdi(2), aisAndRdi(3) |
|
| prtBdbandIndEvent |
1.3.6.1.4.1.164.3.1.6.8.1.1.1.4 |
| This object indicates a unique Event that can cause the Indication Signal.
slm(2) = SLM = Signal Label Mismatch
eed(4) = EED = Excessive Error Defect
pathTrace(5) = the end-to-end source/destination of information is wrong. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notApplicable(1), slm(2), fail(3), eed(4), pathTrace(5) |
|
| prtBdbandIndSigEnable |
1.3.6.1.4.1.164.3.1.6.8.1.1.1.5 |
| This object allows user to define if the event specified by prtBdbandIndEvent
will cause creation of the Indication Signal specified by prtBdbandIndSig or not.
disable - will not enable causing the signal
enable - will enable causing the signal. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notApplicable(1), disable(2), enable(3) |
|
| prtBdbandRowStatus |
1.3.6.1.4.1.164.3.1.6.8.1.1.1.6 |
| Creation/Deletion of rows in the table. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| prtPhyConfigTable |
1.3.6.1.4.1.164.3.1.6.8.1.2 |
| The Phy Config table. Used now for Phy25.6 Mbps. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PrtPhyConfigEntry |
|
| prtPhyConfigEntry |
1.3.6.1.4.1.164.3.1.6.8.1.2.1 |
| An entry in the Phy Config table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PrtPhyConfigEntry |
|
|
| prtPhyTimeElapsed |
1.3.6.1.4.1.164.3.1.6.8.1.2.1.1 |
| The number of seconds that have elapsed since
the beginning of the current error-measurement period. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..899 |
|
| prtPhyValidIntervals |
1.3.6.1.4.1.164.3.1.6.8.1.2.1.2 |
| The number of previous intervals for which valid data was collected.
The value will be 96 unless the interface was brought online within
the last 24 hours, in which case the value will be the number of complete
15 minute since the interface has been online. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..96 |
|
| prtPhyCurrentEntry |
1.3.6.1.4.1.164.3.1.6.8.2.1.1 |
| An entry in the 25.6 Mbps Line Current table.
ifIndex of the line 25.6 Mbps layer of type
25.6 Mbps. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PrtPhyCurrentEntry |
|
|
| prtPhyCurrentLOS |
1.3.6.1.4.1.164.3.1.6.8.2.1.1.1 |
| The counter associated with the number of Loss Of Sync
seconds, encountered by a 25.6 Mbps interface in
the current 15 minute interval. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyCurrentLSV |
1.3.6.1.4.1.164.3.1.6.8.2.1.1.2 |
| The counter associated with the number of Line symbol violation
seconds, encountered by a 25.6 Mbps
interface in the current 15 minute interval. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyCurrentUAS |
1.3.6.1.4.1.164.3.1.6.8.2.1.1.3 |
| The counter associated with the number of UAS
encountered by a 25.6 Mbps
interface in the current 15 minute interval. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyCurrentSES |
1.3.6.1.4.1.164.3.1.6.8.2.1.1.4 |
| The counter associated with the number of SES
encountered by a 25.6 Mbps
interface in the current 15 minute interval. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyCurrentES |
1.3.6.1.4.1.164.3.1.6.8.2.1.1.5 |
| The number of Errored Seconds, encountered by a
25.6 Mbps interface in the current 15 minute interval. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyCurrentStatus |
1.3.6.1.4.1.164.3.1.6.8.2.1.1.6 |
| The statuses of the current interval:
0 - O.K.
1 - The link has been switched by a redundancy mechanism.
2 - Module is in/out.
4 - Empty - card is out. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| prtPhyCurrentLOF |
1.3.6.1.4.1.164.3.1.6.8.2.1.1.7 |
| The number of Loss of Frames, encountered by an
interface in the current 15 minute interval. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyIntervalEntry |
1.3.6.1.4.1.164.3.1.6.8.2.2.1 |
| An entry in the 25.6 Mbps Line Interval table.
ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PrtPhyIntervalEntry |
|
|
| prtPhyIntervalNumber |
1.3.6.1.4.1.164.3.1.6.8.2.2.1.1 |
| A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..96 |
|
| prtPhyIntervalLOS |
1.3.6.1.4.1.164.3.1.6.8.2.2.1.2 |
| The counter associated with the number of Loss Of Sync
seconds , encountered by a 25.6 Mbps interface in
one of the previous 96, individual 15 minute intervals. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyIntervalLSV |
1.3.6.1.4.1.164.3.1.6.8.2.2.1.3 |
| The counter associated with the number of line symbol violation
seconds , encountered by a 25.6 Mbps interface in
one of the previous 96, individual 15 minute intervals. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyIntervalUAS |
1.3.6.1.4.1.164.3.1.6.8.2.2.1.4 |
| The counter associated with the number of UAS
encountered by a 25.6 Mbps interface in one of the previous 96,
individual 15 minute intervals. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyIntervalSES |
1.3.6.1.4.1.164.3.1.6.8.2.2.1.5 |
| The counter associated with the number of SES
encountered by a 25.6 Mbps interface in one of the previous 96,
individual 15 minute intervals. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyIntervalES |
1.3.6.1.4.1.164.3.1.6.8.2.2.1.6 |
| The number of Errored Seconds, encountered by a
25.6 Mbps interface in one of the previous 96, individual 15
minute intervals. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| prtPhyIntervalStatus |
1.3.6.1.4.1.164.3.1.6.8.2.2.1.7 |
| The statuses of the current interval:
0 - O.K.
1 - The link has been switched by a redundancy mechanism.
2 - Module is in/out.
4 - Empty - card is out. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| prtPhyIntervalLOF |
1.3.6.1.4.1.164.3.1.6.8.2.2.1.8 |
| The number of Loss of Frames, encountered by an
interface in one of the previous 96, individual 15
minute intervals. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| r2If |
1.3.6.1.4.1.164.3.1.6.9 |
| OBJECT IDENTIFIER |
|
|
|
| r2IfStatus |
1.3.6.1.4.1.164.3.1.6.9.2 |
| OBJECT IDENTIFIER |
|
|
|
| r2CnfgTable |
1.3.6.1.4.1.164.3.1.6.9.1.1 |
| The write operation into the Table Objects is valid only
to the TmpCnfg entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
R2CnfgEntry |
|
| r2CnfgEntry |
1.3.6.1.4.1.164.3.1.6.9.1.1.1 |
| An entry in table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
R2CnfgEntry |
|
|
| r2CnfgIdx |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.1 |
| This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg.
1 = Current Cnfg.
Write is allowed only to TmpCnfg. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..255 |
|
| r2CnfgProfileIdx |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.2 |
| Profile Index.
Valid values: 1..5
Only instances of profiles that are defined having agnSigProfType=r2Cas will
exist in this table. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2Mode |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.3 |
| R2 Mode.
auto - in this mode, default value of timers will be used by R2,
according to the selected r2Country.
manual - in this mode, user can change the value of R2 timers within the valid
limits, specific to each country. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
auto(2), manual(3) |
|
| r2Country |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.4 |
| R2 Country. R2 Timers can have different range of values and
defaults for each country. When r2Mode=auto, the default value is
used by R2 according to this selected country.
1=ITU-T (standard values)
2=Korea
3=India
4=Brasil (continuous)
5=Brasil (pulsed)
6..10 - reserved for future countries. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2Delay |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.5 |
| This object enables user to configure the link as satellite or terrestrial.
The seize acknowledge detect timing is much shorter (msec) for
terrestrial link than for satellite link (1-2 sec). |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notApplicable(1), terrestrial(2), satellite(3) |
|
| r2MeteringInd |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.6 |
| Which Bit will be used for Metering Indication. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notApplicable(1), cBit(2), bBit(3) |
|
| r2BreakMakeRatio |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.7 |
| This object describes the Break-Make Ratio of Pulse Duration, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notApplicable(1), break56Make44(2), break64Make36(3), break80Make20(4) |
|
| r2ReleaseGuardT2 |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.8 |
| Release Guard timing T2.
Release guard timing before going to idle, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2Regret |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.9 |
| Regret duration, in [sec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2SeizeDetect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.10 |
| Seize Detect. Timer of the R2 incoming side.
Minimum duration to detect a valid seizure, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2SeizeAckDelay |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.11 |
| Timer of the R2 incoming side.
Delay before sending a valid seize ack signal, in [msec].
Applicable only when r2Mode=manual. only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2ClearBackDetect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.12 |
| Timer of the R2 incoming side.
Minimum duration to recognize a valid clear-back, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2ClearFwdDetect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.13 |
| Timer of the R2 incoming side.
Minimum duration to recognize a valid clear-forward, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2FaultDetect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.14 |
| Timer of the R2 incoming side.
Minimum duration to recognize a block signal, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2FaultRemoveDetect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.15 |
| Timer of the R2 incoming side.
Minimum duration to recognize a valid block removal signal, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2MeterPulseDuration |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.16 |
| Timer of the R2 incoming side.
Duration of metering pulse to be sent, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2SeizeAckWait |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.17 |
| Timer of the R2 outgoing side.
Minimum duration to receive seizure acknowledge signal, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2SeizeAckDetect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.18 |
| Timer of the R2 outgoing side.
Minimum duration to recognize a valid seizure acknowledge signal, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2AnswerDetect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.19 |
| Timer of the R2 outgoing side.
Minimum duration to recognize a valid answer signal, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2BlockRemoveDetect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.20 |
| Timer of the R2 outgoing side.
Minimum duration to recognize a valid block removal signal, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2MeterPulseDetect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.21 |
| Timer of the R2 outgoing side.
Minimum duration of incoming meter pulse, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2ForcedDisconnect |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.22 |
| Timer of the R2 outgoing side.
Minimum duration to recognize disconnect signal, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2DisconnectAck |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.23 |
| Timer of the R2 outgoing side.
Minimum duration to recognize disconnect acknowledge signal, in [msec].
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2ReleaseGuardT1 |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.24 |
| Timer of the R2 outgoing side.
Minimum duration to release guard, in [msec].
During this time, no new call can be initiated.
RW only when r2Mode=manual. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2CnfgRowStatus |
1.3.6.1.4.1.164.3.1.6.9.1.1.1.25 |
| This object enables the user to add/delete entries to/from the table. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| r2TsTable |
1.3.6.1.4.1.164.3.1.6.9.1.2 |
| The write operation into the Table Objects is valid only
to the TmpCnfg entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
R2TsEntry |
|
| r2TsEntry |
1.3.6.1.4.1.164.3.1.6.9.1.2.1 |
| An entry in table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
R2TsEntry |
|
|
| r2TsCnfgIdx |
1.3.6.1.4.1.164.3.1.6.9.1.2.1.1 |
| This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg.
1 = Current Cnfg.
Write is allowed only to TmpCnfg. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..255 |
|
| r2TsProfileIdx |
1.3.6.1.4.1.164.3.1.6.9.1.2.1.2 |
| Profile Index.
Valid values: 1..5
Only instances of profiles that are defined having agnSigProfType=r2Cas will
exist in this table. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2TsIdx |
1.3.6.1.4.1.164.3.1.6.9.1.2.1.3 |
| TS Index.
Valid values: 1..31 |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2TsCallEnable |
1.3.6.1.4.1.164.3.1.6.9.1.2.1.4 |
| This object indicates the Enabled Call direction for the specific TS. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
incoming(2), outgoing(3), both(4) |
|
| r2TsMetering |
1.3.6.1.4.1.164.3.1.6.9.1.2.1.5 |
| This object indicates if the specific TS should support Metering. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no(2), yes(3) |
|
| r2TsRowStatus |
1.3.6.1.4.1.164.3.1.6.9.1.2.1.6 |
| This object enables the user to add/delete entries to/from the table. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| r2TsReversePolarity |
1.3.6.1.4.1.164.3.1.6.9.1.2.1.7 |
| This object indicates if the specific TS should support Reverse Polarity. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no(2), yes(3) |
|
| r2StatusTable |
1.3.6.1.4.1.164.3.1.6.9.2.1 |
| The write operation into the Table Objects is valid only
to the TmpCnfg entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
R2StatusEntry |
|
| r2StatusEntry |
1.3.6.1.4.1.164.3.1.6.9.2.1.1 |
| An entry in table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
R2StatusEntry |
|
|
| r2StatusSlotIdx |
1.3.6.1.4.1.164.3.1.6.9.2.1.1.1 |
| Slot Index |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
io1(5), io2(6), io3(7), io4(8), io5(9), io6(10), io7(11), io8(12), io9(13), io10(14), io11(15), io12(16), notApplicable(255) |
|
| r2StatusPortIdx |
1.3.6.1.4.1.164.3.1.6.9.2.1.1.2 |
| This object indicates a unique port number of the ML having
R2 interface.
Valid values: exPrt1 (1)..exPrt4 (4) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| r2StatusTsIdx |
1.3.6.1.4.1.164.3.1.6.9.2.1.1.3 |
| Time Slot index. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..31 |
|
| r2StatusSigDirection |
1.3.6.1.4.1.164.3.1.6.9.2.1.1.4 |
| R2 Time Slot Signaling Direction. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notApplicable(1), incoming(2), outgoing(3) |
|
| r2StatusTsState |
1.3.6.1.4.1.164.3.1.6.9.2.1.1.5 |
| R2 TS State |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notUsed(1), normal(2), remoteBlocked(3), localBlocked(4), localLoop(5), remoteLoop(6) |
|
| r2StatusProtocolState |
1.3.6.1.4.1.164.3.1.6.9.2.1.1.6 |
| R2 Protocol State. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(1), seized(2), seizureAcknowledged(3), answered(4), clearForward(5), clearBack(6), blocked(7), forcedDisc(8), doubleSeizure(9), fault(10), discAcknowledged(11), fault1(12), fault6(13), fault3(14) |
|
| atmLayer2 |
1.3.6.1.4.1.164.12.7 |
| OBJECT IDENTIFIER |
|
|
|
| atmLayer2XVclTable |
1.3.6.1.4.1.164.12.7.1 |
| This table is an extension of VCL table, which is created
for each LAN VCC. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AtmLayer2XVclEntry |
|
| atmLayer2XVclEntry |
1.3.6.1.4.1.164.12.7.1.1 |
| Conceptual row in atmVclTable.
This table augments the RFC2515 VCL table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmLayer2XVclEntry |
|
|
| atmLayer2XVclConnMode |
1.3.6.1.4.1.164.12.7.1.1.1 |
| Each valid LAN VCC is either Main or Sub.
This parameter is configured only once on creation of a LAN VCC.
It can not be changed after creation. In order to change the Mode,
user should delete the connection and create a new one.
main - A LAN VCC, which holds its own bridge port.
Bridge forwarding and Bridge learning is performed only on Main
VCCs.
For working on a transparent bridge, that doesn't perform
layer 2 priority mapping, a Main VCC should be opened, which
is the default connection Mode.
When working with layer 2 priority, a group of LAN VCCs should
be configured, where each group will be associated with only
one Main VCC.
A specific Main can not be used by more than one group.
sub - A LAN VCC is not part of the bridging mechanism.
A Sub VCC automatically inherit some general definitions from
Main VCC of its group: ATM Slot/Port and LAN Slot/Port.
Max number of Sub VCCs allowed per group is:
[Number of Priorities - 1]. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
main(1), sub(2) |
|
| atmLayer2XVclGroupIdx |
1.3.6.1.4.1.164.12.7.1.1.2 |
| The group identifier.
A VCC Group identifier = 0 if the VCC was not associated with a
group yet.
This value is updated according to the group identifier set by
atmLayer2GroupTable. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| atmLayer2GroupTable |
1.3.6.1.4.1.164.12.7.2 |
| This table contains groups and their members.
A group is a bundle of VCCs, which acts as different queues.
Main and Sub VCCs should have the same ATM slot and port,
and the same LAN slot and port.
Each group contains: 1 to VCCs. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AtmLayer2GroupEntry |
|
| atmLayer2GroupEntry |
1.3.6.1.4.1.164.12.7.2.1 |
| Conceptual row in atmLayer2GroupTable.
The indexes: ifIndex, atmVclVpi and atmVclVci indicate
the Network ATM End-Point.
Upon a group creation, one Main VCC must be added first.
After the group was created, Sub VCCs may be added to the group. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmLayer2GroupEntry |
|
|
| atmLayer2GroupIdx |
1.3.6.1.4.1.164.12.7.2.1.1 |
| The group identifier.
0 is not a valid index. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| atmLayer2GroupRowStatus |
1.3.6.1.4.1.164.12.7.2.1.2 |
| Creation/Deletion of rows in the table, and indication of the
entry's status. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| atmLayer2GroupConnMode |
1.3.6.1.4.1.164.12.7.2.1.3 |
| Each valid LAN VCC is either Main or Sub as configured in
atmLayer2XVclTable. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
main(1), sub(2) |
|
| atmLayer2GroupConnPriority |
1.3.6.1.4.1.164.12.7.2.1.4 |
| This parameter is configured by atmLayer2PriorityRx from
atmLayer2PriorityTable.
Each bit in the Octet represents a specific priority as follows:
MSB 7 6 5 4 3 2 1 0 LSB -> Priorities
|--------------------|
1 0 0 1 0 0 0 1 -> Value
In this example, a certain VCC has several priorities: 0, 4 and 7. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| atmLayer2GroupName |
1.3.6.1.4.1.164.12.7.2.1.5 |
| Group name. Configured by the user.
The name is unique per system.
For atmLayer2GroupIdx=0, the name will be null. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| atmLayer2PriorityTable |
1.3.6.1.4.1.164.12.7.3 |
| This table maps all priorities inside a group.
Several priorities might be mapped to the same VCC.
Upon priority change, the agent will update the VCCs of the
changed priority in this table, and will update -
atmLayer2GroupConnPriority parameter of both former and new owners
of the changed priority.
Changing a VCC value is actually a change of three parameters
simultaneously: atmLayer2PriorityIfIndex, atmLayer2PriorityVclVpi
and atmLayer2PriorityVclVci. Otherwise, the set will be rejected,
since there might be that such VCC doesn't exist in the specific
group. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AtmLayer2PriorityEntry |
|
| atmLayer2PriorityEntry |
1.3.6.1.4.1.164.12.7.3.1 |
| Conceptual row in atmLayer2PriorityTable.
Each entry is a Network ATM End-Point per priority.
Upon a group creation, all priorities are mapped to the Main VCC.
Number of entries per group is according to the number of
priorities enabled. (For example, for Max priorities = 8,
the agent will create 8 entries). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmLayer2PriorityEntry |
|
|
| atmLayer2PriorityRx |
1.3.6.1.4.1.164.12.7.3.1.2 |
| The priority values.
The used values are 0-7, but since this value is part of the index
of the table, and in order to avoid '0' as an index, the index syntax
is 1..8, but the real value is atmLayer2PriorityRx-1:
0 - for Low priority.
7 - for High priority. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..8 |
|
| atmLayer2GroupIndexNext |
1.3.6.1.4.1.164.12.7.4 |
| This object contains an appropriate value to
be used for atmLayer2GroupIdx when creating
entries in the atmLayer2GroupTable. The value
0 indicates that no unassigned entries are
available. To obtain the atmLayer2GroupIdx
value for a new entry, the manager gets
the current value of this object. The next index
will be of the first unassigned entry. It will be
provided by checking the assigned entries. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..2147483647 |
|
| atmLayer2CfgTable |
1.3.6.1.4.1.164.12.7.5 |
| Bridge configuration Table. This table supports multi-bridge
and bridge features within an ATM device. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AtmLayer2CfgEntry |
|
| atmLayer2CfgEntry |
1.3.6.1.4.1.164.12.7.5.1 |
| Conceptual row in atmLayer2CfgTable.
Each entry in this table contains the bridging attributes for
both Ethernet and ATM sides.
The interface index is the Ethernet port interface.
For Ace52: this object represents the Bridge ifIndex. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmLayer2CfgEntry |
|
|
| atmLayer2CfgBridgingMode |
1.3.6.1.4.1.164.12.7.5.1.1 |
| Bridging mode can be one of the following:
ATM <> Ethernet - Bridging is between the Ethernet
port and the ATM port (there is no bridging between VCs).
ATM <> Ethernet + ATM - Bridging is done both between
the Ethernet port and the ATM port and also between VCs. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
accessOnly(1), accessAndSwitching(2) |
|
| atmLayer2CfgVlanMode |
1.3.6.1.4.1.164.12.7.5.1.2 |
| VLAN Mode. Upon Mode changing, all LAN VCCs will be deleted
by the agent from all tables that include LAN VCCs. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disable(2), enable(3) |
|
| atmLayer2CfgAtmAcceptableFrameType |
1.3.6.1.4.1.164.12.7.5.1.3 |
| The Frame Type that will be acceptable by the VCCs that
are associated with this Ethernet port.
Frames which don't match the selected type will be discarded.
admitAll - all frames will be accepted.
admitOnlyVlanTagged - only Tagged frames will be accepted.
admitOnlyUnTagged - only unTagged frames will be accepted. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notApplicable(1), admitAll(2), admitOnlyVlanTagged(3), admitOnlyUnTagged(4) |
|
| atmLayer2CfgAtmIngressFiltering |
1.3.6.1.4.1.164.12.7.5.1.4 |
| For the VCCs that are associated with this Ethernet port,
when this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| atmLayer2CfgAtmTxFrameType |
1.3.6.1.4.1.164.12.7.5.1.5 |
| The Frame Type that will be transmitted by the VCCs that
are associated with this Ethernet port.
unTagged - The transmitted frames will be unTagged.
tagged - The transmitted frames will be Tagged. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notApplicable(1), unTagged(2), tagged(3) |
|
| atmLayer2CfgEthAcceptableFrameType |
1.3.6.1.4.1.164.12.7.5.1.6 |
| The Frame Type that this Ethernet port will accept.
(for ACE-52: the Frame Type that this Bridge will accept)
This parameter is notApplicable for atmLayer2VlanMode=disable.
Frames which don't match the selected type will be discarded.
admitAll - all frames will be accepted.
admitOnlyVlanTagged - only Tagged frames will be accepted.
admitOnlyUnTagged - only unTagged frames will be accepted. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notApplicable(1), admitAll(2), admitOnlyVlanTagged(3), admitOnlyUnTagged(4) |
|
| atmLayer2CfgBridgeAction |
1.3.6.1.4.1.164.12.7.5.1.7 |
| This object enables to perform the specified action on the
selected port. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deleteLanTable(7), noOp(255) |
|
| atmLayer2CfgLearningMode |
1.3.6.1.4.1.164.12.7.5.1.8 |
| This object specifies the mode of the learning process of a bridge.
svl - Shared VLAN process. If an individual MAC Address is learned
in one VLAN, this information is used in forwarding decisions
taken for that address for all other VLANs.
ivl - Independent VLAN process. If an individual MAC Address is learned
in one VLAN, this information is not used in forwarding decisions
taken for that address for all other VLANs. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
svl(1), ivl(2) |
|
| atmLayer2CfgAgingTime |
1.3.6.1.4.1.164.12.7.5.1.9 |
| The timeout period in seconds for aging out
dynamically learned forwarding information. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| radAtmFr |
1.3.6.1.4.1.164.12.8 |
| OBJECT IDENTIFIER |
|
|
|
| frAtmIwfXConnectionEntry |
1.3.6.1.4.1.164.12.8.1.1 |
| Conceptual row in frAtmIwfXConnectionTable.
This table augments the RFC2955. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrAtmIwfXConnectionEntry |
|
|
| frAtmIwfXConnMode |
1.3.6.1.4.1.164.12.8.1.1.1 |
| FR IWF Mode.
service - Service InterWorking (FRF.8),
network - Network InterWorking (FRF.5). |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
service(1), network(2) |
|
| frAtmIwfXConnSscsDlci |
1.3.6.1.4.1.164.12.8.1.1.2 |
| This parameter is relevant for
frAtmIwfXConnMode=network (FRF.5) only.
This parameter allow configuration of the
FR SSCS DLCI that is transferred to the
remote FR unit. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|