QoS-MIB

File: QoS-MIB.mib (25957 bytes)

Imported modules

SNMPv2-SMI DLINK-ID-REC-MIB BRIDGE-MIB
Q-BRIDGE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Integer32 dlink-common-mgmt dot1dBasePort
PortList

Defined Types

SwQoSBandwidthControlEntry  
SEQUENCE    
  swQoSBandwidthPort INTEGER
  swQoSBandwidthRxRate INTEGER
  swQoSBandwidthTxRate INTEGER
  swQoSBandwidthRadiusRxRate INTEGER
  swQoSBandwidthRadiusTxRate INTEGER

SwQoSSchedulingEntry  
SEQUENCE    
  swQoSSchedulingPort INTEGER
  swQoSSchedulingClassID INTEGER
  swQoSSchedulingWeight INTEGER
  swQoSSchedulingMechanism INTEGER
  swQoSSchedulingMechanismEffec INTEGER

SwQoS8021pDefaultPriorityEntry  
SEQUENCE    
  swQoS8021pRadiusPriority INTEGER

SwQos8021pColorMapCtrlEntry  
SEQUENCE    
  swQos8021pColorMapCtrlPortIndex INTEGER
  swQos8021pColorMapCtrlPriorityIndex INTEGER
  swQos8021pColorMapCtrlColor INTEGER

SwQos8021pColorMapGlobalCtrlEntry  
SEQUENCE    
  swQos8021pColorMapGlobalCtrlPriorityIndex INTEGER
  swQos8021pColorMapGlobalCtrlColor INTEGER

SwQosDscpTrustPortCtrlEntry  
SEQUENCE    
  swQosDscpTrustPortCtrlPortIndex INTEGER
  swQosDscpTrustPortCtrlState INTEGER

SwQosDscpMapCtrlEntry  
SEQUENCE    
  swQosDscpMapCtrlPortIndex INTEGER
  swQosDscpMapCtrlDscpIndex INTEGER
  swQosDscpMapCtrl8021pPriority INTEGER
  swQosDscpMapCtrlNewDscp INTEGER
  swQosDscpMapCtrlColor INTEGER

SwQosDscpMapGlobalCtrlEntry  
SEQUENCE    
  swQosDscpMapGlobalCtrlDscpIndex INTEGER
  swQosDscpMapGlobalCtrl8021pPriority INTEGER
  swQosDscpMapGlobalCtrlNewDscp INTEGER
  swQosDscpMapGlobalCtrlColor INTEGER

SwCoSBandwidthControlEntry  
SEQUENCE    
  swCoSBandwidthPort INTEGER
  swCoSBandwidthCoSID INTEGER
  swCoSBandwidthMinRate INTEGER
  swCoSBandwidthMaxRate INTEGER

SwQoSScheduleProfileEntry  
SEQUENCE    
  swQoSScheduleProfileId INTEGER
  swQoSScheduleProfileCoSID INTEGER
  swQoSScheduleProfileWeight INTEGER
  swQoSScheduleProfileMechanism INTEGER

SwQoSScheduleGroupEntry  
SEQUENCE    
  swQoSScheduleGroupPortMember PortList

Defined Values

swQoSMIB 1.3.6.1.4.1.171.12.61
The structure of QoS for the proprietary enterprise.
MODULE-IDENTITY    

swQoSCtrl 1.3.6.1.4.1.171.12.61.1
OBJECT IDENTIFIER    

swQoSInfo 1.3.6.1.4.1.171.12.61.2
OBJECT IDENTIFIER    

swQoSMgmt 1.3.6.1.4.1.171.12.61.3
OBJECT IDENTIFIER    

swQoSBandwidthControlTable 1.3.6.1.4.1.171.12.61.3.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQoSBandwidthControlEntry

swQoSBandwidthControlEntry 1.3.6.1.4.1.171.12.61.3.1.1
A list of information contained in the swQoSBandwidthControlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQoSBandwidthControlEntry  

swQoSBandwidthPort 1.3.6.1.4.1.171.12.61.3.1.1.1
Indicates the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQoSBandwidthRxRate 1.3.6.1.4.1.171.12.61.3.1.1.2
Indicates Rx Rate of the specified port. Value 0 means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 8..10240000  

swQoSBandwidthTxRate 1.3.6.1.4.1.171.12.61.3.1.1.3
Indicates the Tx Rate of the specified port. A value of 0 means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 8..10240000  

swQoSBandwidthRadiusRxRate 1.3.6.1.4.1.171.12.61.3.1.1.4
The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQoSBandwidthRadiusTxRate 1.3.6.1.4.1.171.12.61.3.1.1.5
The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQoSSchedulingTable 1.3.6.1.4.1.171.12.61.3.2
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQoSSchedulingEntry

swQoSSchedulingEntry 1.3.6.1.4.1.171.12.61.3.2.1
A list of information contained in the swQoSSchedulingTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQoSSchedulingEntry  

swQoSSchedulingPort 1.3.6.1.4.1.171.12.61.3.2.1.1
Indicates the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQoSSchedulingClassID 1.3.6.1.4.1.171.12.61.3.2.1.2
Indicates the hardware queue number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

swQoSSchedulingWeight 1.3.6.1.4.1.171.12.61.3.2.1.3
Indicates the maximum number of packets the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

swQoSSchedulingMechanism 1.3.6.1.4.1.171.12.61.3.2.1.4
Indicates the mechanism of QoS scheduling. This object indicates the Qos Scheduling Mechanism mode on a port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER strict(1), wrr(2)  

swQoSSchedulingMechanismEffec 1.3.6.1.4.1.171.12.61.3.2.1.5
Indicates the effective mechanism of QoS scheduling. If the swQoSSchedulingWeight is configured to be 0, then this object will always display strict (1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER strict(1), wrr(2)  

swQoS8021pDefaultPriorityTable 1.3.6.1.4.1.171.12.61.3.3
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQoS8021pDefaultPriorityEntry

swQoS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.12.61.3.3.1
A list of information contained in the swQoS8021pDefaultPriorityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQoS8021pDefaultPriorityEntry  

swQoS8021pRadiusPriority 1.3.6.1.4.1.171.12.61.3.3.1.1
Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQosHolPreventionMgmt 1.3.6.1.4.1.171.12.61.3.4
OBJECT IDENTIFIER    

swQoSHolPreventionCtrl 1.3.6.1.4.1.171.12.61.3.4.6
This controls QoS HoL Prevention.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swQosInBandMgmt 1.3.6.1.4.1.171.12.61.3.5
OBJECT IDENTIFIER    

swQosInBandMgmtSetDefPriority 1.3.6.1.4.1.171.12.61.3.5.1
Sets the default priority. It is project dependent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), action(2)  

swQosInBandMgmtPktPriority 1.3.6.1.4.1.171.12.61.3.5.2
Specifies the priority of packets, the range is 0-7. 7 is the highest priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

swQos8021pColorMapMgmt 1.3.6.1.4.1.171.12.61.3.6
OBJECT IDENTIFIER    

swQos8021pColorMapCtrlTable 1.3.6.1.4.1.171.12.61.3.6.1
A table that contains information about priority map to packet color on each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQos8021pColorMapCtrlEntry

swQos8021pColorMapCtrlEntry 1.3.6.1.4.1.171.12.61.3.6.1.1
A list that contains priority map to packet color per port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQos8021pColorMapCtrlEntry  

swQos8021pColorMapCtrlPortIndex 1.3.6.1.4.1.171.12.61.3.6.1.1.1
This object indicates the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQos8021pColorMapCtrlPriorityIndex 1.3.6.1.4.1.171.12.61.3.6.1.1.2
This object indicates the source priority of incoming packets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQos8021pColorMapCtrlColor 1.3.6.1.4.1.171.12.61.3.6.1.1.3
This object indicates the source priority of incoming packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER green(1), red(2), yellow(3)  

swQos8021pColorMapGlobalCtrlTable 1.3.6.1.4.1.171.12.61.3.6.2
A table that contains information about priority map to packet color.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQos8021pColorMapGlobalCtrlEntry

swQos8021pColorMapGlobalCtrlEntry 1.3.6.1.4.1.171.12.61.3.6.2.1
A list that contains priority map to packet color.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQos8021pColorMapGlobalCtrlEntry  

swQos8021pColorMapGlobalCtrlPriorityIndex 1.3.6.1.4.1.171.12.61.3.6.2.1.1
This object indicates the source priority of incoming packets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQos8021pColorMapGlobalCtrlColor 1.3.6.1.4.1.171.12.61.3.6.2.1.2
This object indicates the source priority of incoming packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER green(1), red(2), yellow(3)  

swQosDscpTrustPortMgmt 1.3.6.1.4.1.171.12.61.3.7
OBJECT IDENTIFIER    

swQosDscpTrustPortCtrlTable 1.3.6.1.4.1.171.12.61.3.7.1
A table that contains information about the DSCP trust portlist.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQosDscpTrustPortCtrlEntry

swQosDscpTrustPortCtrlEntry 1.3.6.1.4.1.171.12.61.3.7.1.1
A list that contains the DSCP trusted state per port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQosDscpTrustPortCtrlEntry  

swQosDscpTrustPortCtrlPortIndex 1.3.6.1.4.1.171.12.61.3.7.1.1.1
This object indicates the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQosDscpTrustPortCtrlState 1.3.6.1.4.1.171.12.61.3.7.1.1.2
This object is used to enable/disable the DSCP trusted state on a selected port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swQosDscpMapMgmt 1.3.6.1.4.1.171.12.61.3.8
OBJECT IDENTIFIER    

swQosDscpMapCtrlTable 1.3.6.1.4.1.171.12.61.3.8.1
A table that contains information about DSCP map to priority and packet color on each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQosDscpMapCtrlEntry

swQosDscpMapCtrlEntry 1.3.6.1.4.1.171.12.61.3.8.1.1
A list that contains DSCP map information for each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQosDscpMapCtrlEntry  

swQosDscpMapCtrlPortIndex 1.3.6.1.4.1.171.12.61.3.8.1.1.1
This object indicates the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQosDscpMapCtrlDscpIndex 1.3.6.1.4.1.171.12.61.3.8.1.1.2
This object indicates the source DSCP incoming packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQosDscpMapCtrl8021pPriority 1.3.6.1.4.1.171.12.61.3.8.1.1.3
This object indicates the 802.1p priority on each port. Default value is: DSCP Priority 0-7 0 8-15 1 16-23 2 24-31 3 32-39 4 40-47 5 48-55 6 56-63 7
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

swQosDscpMapCtrlNewDscp 1.3.6.1.4.1.171.12.61.3.8.1.1.4
This object indicates the new DSCP map on each port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

swQosDscpMapCtrlColor 1.3.6.1.4.1.171.12.61.3.8.1.1.5
This object maps the color for packets on each port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER green(1), red(2), yellow(3)  

swQosDscpMapGlobalCtrlTable 1.3.6.1.4.1.171.12.61.3.8.2
A table that contains information about DSCP map to priority and packet color.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQosDscpMapGlobalCtrlEntry

swQosDscpMapGlobalCtrlEntry 1.3.6.1.4.1.171.12.61.3.8.2.1
A list that contains DSCP map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQosDscpMapGlobalCtrlEntry  

swQosDscpMapGlobalCtrlDscpIndex 1.3.6.1.4.1.171.12.61.3.8.2.1.1
This object indicates the source DSCP incoming packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swQosDscpMapGlobalCtrl8021pPriority 1.3.6.1.4.1.171.12.61.3.8.2.1.2
This object indicates the 802.1p priority. Default value is: DSCP Priority 0-7 0 8-15 1 16-23 2 24-31 3 32-39 4 40-47 5 48-55 6 56-63 7
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

swQosDscpMapGlobalCtrlNewDscp 1.3.6.1.4.1.171.12.61.3.8.2.1.3
This object indicates the new DSCP map.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

swQosDscpMapGlobalCtrlColor 1.3.6.1.4.1.171.12.61.3.8.2.1.4
This object maps the color for packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER green(1), red(2), yellow(3)  

swCoSBandwidthControlTable 1.3.6.1.4.1.171.12.61.3.9
A table that contains information about CoS Bandwidth Control on each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwCoSBandwidthControlEntry

swCoSBandwidthControlEntry 1.3.6.1.4.1.171.12.61.3.9.1
A list that contains CoS Bandwidth Control information for each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwCoSBandwidthControlEntry  

swCoSBandwidthPort 1.3.6.1.4.1.171.12.61.3.9.1.1
This object indicates the port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

swCoSBandwidthCoSID 1.3.6.1.4.1.171.12.61.3.9.1.2
Indicates the hardware queue number.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..7  

swCoSBandwidthMinRate 1.3.6.1.4.1.171.12.61.3.9.1.3
Indicates the Minimum Rate of the specified port. A value of 0 means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 8..10240000  

swCoSBandwidthMaxRate 1.3.6.1.4.1.171.12.61.3.9.1.4
Indicates the Maximum Rate of the specified port. A value of 0 means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 8..10240000  

swQoSScheduleProfileTable 1.3.6.1.4.1.171.12.61.3.10
A table that contains information about schedule profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQoSScheduleProfileEntry

swQoSScheduleProfileEntry 1.3.6.1.4.1.171.12.61.3.10.1
A list of information contained in the swQoSScheduleProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQoSScheduleProfileEntry  

swQoSScheduleProfileId 1.3.6.1.4.1.171.12.61.3.10.1.1
Indicates the profile identification.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

swQoSScheduleProfileCoSID 1.3.6.1.4.1.171.12.61.3.10.1.2
Indicates the hardware queue number.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..7  

swQoSScheduleProfileMechanism 1.3.6.1.4.1.171.12.61.3.10.1.3
Indicates the mechanism of the specify hardware queue
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER strict(1), wrr(2)  

swQoSScheduleProfileWeight 1.3.6.1.4.1.171.12.61.3.10.1.4
Indicates the maximum number of packets the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

swQoSScheduleGroupTable 1.3.6.1.4.1.171.12.61.3.11
A table that contains information about schedule group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwQoSScheduleGroupEntry

swQoSScheduleGroupEntry 1.3.6.1.4.1.171.12.61.3.11.1
A list of information contained in the swQoSScheduleGroupTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwQoSScheduleGroupEntry  

swQoSScheduleGroupPortMember 1.3.6.1.4.1.171.12.61.3.11.1.1
Indicates the ports that use the specified profile identification.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor