PT3080-MIB

File: PT3080-MIB.mib (331953 bytes)

Imported modules

PT-MIB SNMPv2-SMI SNMPv2-CONF
SNMPv2-TC

Imported symbols

pt MODULE-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE Integer32 IpAddress
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
AGENT-CAPABILITIES DateAndTime DisplayString

Defined Types

Pt3080SystemScheduledActionEntry  
SEQUENCE    
  pt3080SystemScheduledActionID Integer32
  pt3080SystemScheduledActionRecurrence INTEGER
  pt3080SystemScheduledActionHour Integer32
  pt3080SystemScheduledActionMinute Integer32
  pt3080SystemScheduledActionWeekday INTEGER
  pt3080SystemScheduledActionMonthDay Integer32
  pt3080SystemScheduledActionDate DisplayString
  pt3080SystemScheduledActionRandomDelay Integer32
  pt3080SystemScheduledActionAction INTEGER
  pt3080SystemScheduledActionRepeaterMode INTEGER
  pt3080SystemScheduledActionPresetNo INTEGER
  pt3080SystemScheduledActionRebootImage INTEGER
  pt3080SystemScheduledActionRebootSystemType INTEGER
  pt3080SystemScheduledActionMute INTEGER
  pt3080SystemScheduledActionSWUpgradeProtocol INTEGER
  pt3080SystemScheduledActionSWUpgradeUsername DisplayString
  pt3080SystemScheduledActionSWUpgradePassword DisplayString
  pt3080SystemScheduledActionSWUpgradeImageServer DisplayString
  pt3080SystemScheduledActionSWUpgradeImagePath DisplayString

Pt3080GroupAlarmEntry  
SEQUENCE    
  pt3080GroupAlarmID Integer32
  pt3080GroupAlarmDescription DisplayString
  pt3080GroupAlarmState INTEGER
  pt3080GroupAlarmActionEventlog INTEGER
  pt3080GroupAlarmActionRelay1 INTEGER
  pt3080GroupAlarmActionRelay2 INTEGER
  pt3080GroupAlarmActionTrap INTEGER
  pt3080GroupAlarmActionEmail INTEGER
  pt3080GroupAlarmActionAlarmLED INTEGER
  pt3080GroupAlarmActionForceMode INTEGER

Pt3080ASITSPrimaryAlarmEntry  
SEQUENCE    
  pt3080ASITSPrimaryAlarmID Integer32
  pt3080ASITSPrimaryAlarmDescription DisplayString
  pt3080ASITSPrimaryAlarmState INTEGER
  pt3080ASITSPrimaryAlarmActionEventlog INTEGER
  pt3080ASITSPrimaryAlarmActionRelay1 INTEGER
  pt3080ASITSPrimaryAlarmActionRelay2 INTEGER
  pt3080ASITSPrimaryAlarmActionTrap INTEGER
  pt3080ASITSPrimaryAlarmActionEmail INTEGER
  pt3080ASITSPrimaryAlarmActionAlarmLED INTEGER
  pt3080ASITSPrimaryAlarmActionForceMode INTEGER

Pt3080ASITSSecondaryAlarmEntry  
SEQUENCE    
  pt3080ASITSSecondaryAlarmID Integer32
  pt3080ASITSSecondaryAlarmDescription DisplayString
  pt3080ASITSSecondaryAlarmState INTEGER
  pt3080ASITSSecondaryAlarmActionEventlog INTEGER
  pt3080ASITSSecondaryAlarmActionRelay1 INTEGER
  pt3080ASITSSecondaryAlarmActionRelay2 INTEGER
  pt3080ASITSSecondaryAlarmActionTrap INTEGER
  pt3080ASITSSecondaryAlarmActionEmail INTEGER
  pt3080ASITSSecondaryAlarmActionAlarmLED INTEGER
  pt3080ASITSSecondaryAlarmActionForceMode INTEGER

Pt3080SFNAlarmEntry  
SEQUENCE    
  pt3080SFNAlarmID Integer32
  pt3080SFNAlarmDescription DisplayString
  pt3080SFNAlarmState INTEGER
  pt3080SFNAlarmActionEventlog INTEGER
  pt3080SFNAlarmActionRelay1 INTEGER
  pt3080SFNAlarmActionRelay2 INTEGER
  pt3080SFNAlarmActionTrap INTEGER
  pt3080SFNAlarmActionEmail INTEGER
  pt3080SFNAlarmActionAlarmLED INTEGER
  pt3080SFNAlarmActionForceMode INTEGER

Pt3080ReferenceAlarmEntry  
SEQUENCE    
  pt3080ReferenceAlarmID Integer32
  pt3080ReferenceAlarmDescription DisplayString
  pt3080ReferenceAlarmState INTEGER
  pt3080ReferenceAlarmActionEventlog INTEGER
  pt3080ReferenceAlarmActionRelay1 INTEGER
  pt3080ReferenceAlarmActionRelay2 INTEGER
  pt3080ReferenceAlarmActionTrap INTEGER
  pt3080ReferenceAlarmActionEmail INTEGER
  pt3080ReferenceAlarmActionAlarmLED INTEGER
  pt3080ReferenceAlarmActionForceMode INTEGER

Pt3080RFAlarmEntry  
SEQUENCE    
  pt3080RFAlarmID Integer32
  pt3080RFAlarmDescription DisplayString
  pt3080RFAlarmState INTEGER
  pt3080RFAlarmActionEventlog INTEGER
  pt3080RFAlarmActionRelay1 INTEGER
  pt3080RFAlarmActionRelay2 INTEGER
  pt3080RFAlarmActionTrap INTEGER
  pt3080RFAlarmActionEmail INTEGER
  pt3080RFAlarmActionAlarmLED INTEGER
  pt3080RFAlarmActionForceMode INTEGER

Pt3080GPSAlarmEntry  
SEQUENCE    
  pt3080GPSAlarmID Integer32
  pt3080GPSAlarmDescription DisplayString
  pt3080GPSAlarmState INTEGER
  pt3080GPSAlarmActionEventlog INTEGER
  pt3080GPSAlarmActionRelay1 INTEGER
  pt3080GPSAlarmActionRelay2 INTEGER
  pt3080GPSAlarmActionTrap INTEGER
  pt3080GPSAlarmActionEmail INTEGER
  pt3080GPSAlarmActionAlarmLED INTEGER
  pt3080GPSAlarmActionForceMode INTEGER

Pt3080TSoIPAlarmEntry  
SEQUENCE    
  pt3080TSoIPAlarmID Integer32
  pt3080TSoIPAlarmDescription DisplayString
  pt3080TSoIPAlarmState INTEGER
  pt3080TSoIPAlarmActionEventlog INTEGER
  pt3080TSoIPAlarmActionRelay1 INTEGER
  pt3080TSoIPAlarmActionRelay2 INTEGER
  pt3080TSoIPAlarmActionTrap INTEGER
  pt3080TSoIPAlarmActionEmail INTEGER
  pt3080TSoIPAlarmActionAlarmLED INTEGER
  pt3080TSoIPAlarmActionForceMode INTEGER

Pt3080ExternalAlarmEntry  
SEQUENCE    
  pt3080ExternalAlarmID Integer32
  pt3080ExternalAlarmDescription DisplayString
  pt3080ExternalAlarmState INTEGER
  pt3080ExternalAlarmActionEventlog INTEGER
  pt3080ExternalAlarmActionRelay1 INTEGER
  pt3080ExternalAlarmActionRelay2 INTEGER
  pt3080ExternalAlarmActionTrap INTEGER
  pt3080ExternalAlarmActionEmail INTEGER
  pt3080ExternalAlarmActionAlarmLED INTEGER
  pt3080ExternalAlarmActionForceMode INTEGER

Pt3080HWMonitorAlarmEntry  
SEQUENCE    
  pt3080HWMonitorAlarmID Integer32
  pt3080HWMonitorAlarmDescription DisplayString
  pt3080HWMonitorAlarmState INTEGER
  pt3080HWMonitorAlarmActionEventlog INTEGER
  pt3080HWMonitorAlarmActionRelay1 INTEGER
  pt3080HWMonitorAlarmActionRelay2 INTEGER
  pt3080HWMonitorAlarmActionTrap INTEGER
  pt3080HWMonitorAlarmActionEmail INTEGER
  pt3080HWMonitorAlarmActionAlarmLED INTEGER
  pt3080HWMonitorAlarmActionForceMode INTEGER

Pt3080CommsAlarmEntry  
SEQUENCE    
  pt3080CommsAlarmID Integer32
  pt3080CommsAlarmDescription DisplayString
  pt3080CommsAlarmState INTEGER
  pt3080CommsAlarmActionEventlog INTEGER
  pt3080CommsAlarmActionRelay1 INTEGER
  pt3080CommsAlarmActionRelay2 INTEGER
  pt3080CommsAlarmActionTrap INTEGER
  pt3080CommsAlarmActionEmail INTEGER
  pt3080CommsAlarmActionAlarmLED INTEGER
  pt3080CommsAlarmActionForceMode INTEGER

Pt3080ASIAlarmEntry  
SEQUENCE    
  pt3080ASIAlarmID Integer32
  pt3080ASIAlarmDescription DisplayString
  pt3080ASIAlarmState INTEGER
  pt3080ASIAlarmActionEventlog INTEGER
  pt3080ASIAlarmActionRelay1 INTEGER
  pt3080ASIAlarmActionRelay2 INTEGER
  pt3080ASIAlarmActionTrap INTEGER
  pt3080ASIAlarmActionEmail INTEGER
  pt3080ASIAlarmActionAlarmLED INTEGER
  pt3080ASIAlarmActionForceMode INTEGER

Pt3080DemodulatorAlarmEntry  
SEQUENCE    
  pt3080DemodulatorAlarmID Integer32
  pt3080DemodulatorAlarmDescription DisplayString
  pt3080DemodulatorAlarmState INTEGER
  pt3080DemodulatorAlarmActionEventlog INTEGER
  pt3080DemodulatorAlarmActionRelay1 INTEGER
  pt3080DemodulatorAlarmActionRelay2 INTEGER
  pt3080DemodulatorAlarmActionTrap INTEGER
  pt3080DemodulatorAlarmActionEmail INTEGER
  pt3080DemodulatorAlarmActionAlarmLED INTEGER
  pt3080DemodulatorAlarmActionForceMode INTEGER

Pt3080InternalAlarmEntry  
SEQUENCE    
  pt3080InternalAlarmID Integer32
  pt3080InternalAlarmDescription DisplayString
  pt3080InternalAlarmState INTEGER
  pt3080InternalAlarmActionEventlog INTEGER
  pt3080InternalAlarmActionRelay1 INTEGER
  pt3080InternalAlarmActionRelay2 INTEGER
  pt3080InternalAlarmActionTrap INTEGER
  pt3080InternalAlarmActionEmail INTEGER
  pt3080InternalAlarmActionAlarmLED INTEGER
  pt3080InternalAlarmActionForceMode INTEGER

Pt3080PresetEntry  
SEQUENCE    
  pt3080PresetNo Integer32
  pt3080PresetName DisplayString

Pt3080EventlogEntry  
SEQUENCE    
  pt3080EventlogNo Integer32
  pt3080EventlogID Integer32
  pt3080EventlogTimestamp DateAndTime
  pt3080EventlogText DisplayString

Pt3080CommsStaticRouteEntry  
SEQUENCE    
  pt3080CommsStaticRouteNO Integer32
  pt3080CommsStaticRouteType INTEGER
  pt3080CommsStaticRoutePrefix IpAddress
  pt3080CommsStaticRoutePrefixSize Integer32
  pt3080CommsStaticRouteTarget IpAddress
  pt3080CommsStaticRoutePhysicalInterface INTEGER

Defined Values

pt3080 1.3.6.1.4.1.18086.3080
This is the MIB file of PT3080 DVB-T/H Modulator. Copyright (c) 2008-2015 Protelevision Technologies A/S. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
MODULE-IDENTITY    

pt3080System 1.3.6.1.4.1.18086.3080.1
OBJECT IDENTIFIER    

pt3080Mode 1.3.6.1.4.1.18086.3080.2
OBJECT IDENTIFIER    

pt3080Input 1.3.6.1.4.1.18086.3080.3
OBJECT IDENTIFIER    

pt3080Output 1.3.6.1.4.1.18086.3080.4
OBJECT IDENTIFIER    

pt3080Gps 1.3.6.1.4.1.18086.3080.7
OBJECT IDENTIFIER    

pt3080TSoIP 1.3.6.1.4.1.18086.3080.10
OBJECT IDENTIFIER    

pt3080Monitor 1.3.6.1.4.1.18086.3080.12
OBJECT IDENTIFIER    

pt3080Test 1.3.6.1.4.1.18086.3080.13
OBJECT IDENTIFIER    

pt3080Alarm 1.3.6.1.4.1.18086.3080.14
OBJECT IDENTIFIER    

pt3080Preset 1.3.6.1.4.1.18086.3080.15
OBJECT IDENTIFIER    

pt3080Eventlog 1.3.6.1.4.1.18086.3080.16
OBJECT IDENTIFIER    

pt3080Comms 1.3.6.1.4.1.18086.3080.17
OBJECT IDENTIFIER    

pt3080Demodulator 1.3.6.1.4.1.18086.3080.24
OBJECT IDENTIFIER    

pt3080Precorrector 1.3.6.1.4.1.18086.3080.25
OBJECT IDENTIFIER    

pt3080ASI 1.3.6.1.4.1.18086.3080.30
OBJECT IDENTIFIER    

pt3080Reception 1.3.6.1.4.1.18086.3080.26
OBJECT IDENTIFIER    

pt3080Backplane 1.3.6.1.4.1.18086.3080.27
OBJECT IDENTIFIER    

pt3080Notifs 1.3.6.1.4.1.18086.3080.64
OBJECT IDENTIFIER    

pt3080Conformance 1.3.6.1.4.1.18086.3080.100
OBJECT IDENTIFIER    

pt3080Compliances 1.3.6.1.4.1.18086.3080.100.1
OBJECT IDENTIFIER    

pt3080SystemInstrumentFW1Rev 1.3.6.1.4.1.18086.3080.1.7
The instrument FW1 revision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentFW1RevBL 1.3.6.1.4.1.18086.3080.1.8
The instrument FW1 BL revision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentFW2Rev 1.3.6.1.4.1.18086.3080.1.9
The instrument FW2 revision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentFW2RevBL 1.3.6.1.4.1.18086.3080.1.10
The instrument FW2 BL revision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentFW3Rev 1.3.6.1.4.1.18086.3080.1.11
The instrument FW3 revision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentFW4Rev 1.3.6.1.4.1.18086.3080.1.12
The instrument FW4 revision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentPCBRev 1.3.6.1.4.1.18086.3080.1.13
The instrument PCB revision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentCalibrationRev 1.3.6.1.4.1.18086.3080.1.14
The instrument Calibration revision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentCalibrationDate 1.3.6.1.4.1.18086.3080.1.15
The instrument Calibration date
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemReboot 1.3.6.1.4.1.18086.3080.1.16
Force a reboot of the device on the designated image now.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER keeprunning(0), sameimage(1), otherimage(2), image0(3), image1(4)  

pt3080SystemRebootDefaultConfig 1.3.6.1.4.1.18086.3080.1.19
Restore all parameters to factory default and reboot the device on the same image.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER keeprunning(0), reboot(1)  

pt3080SystemDateTime 1.3.6.1.4.1.18086.3080.1.22
The current date/time in local timezone of the device. Format is YYYY MM DD HH MM SS.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080SystemImage0Version 1.3.6.1.4.1.18086.3080.1.24
The image 0 version string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemImage0InstalledDate 1.3.6.1.4.1.18086.3080.1.25
The date and time image 0 was installed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

pt3080SystemImage1version 1.3.6.1.4.1.18086.3080.1.26
The image 1 version string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemImage1InstalledDate 1.3.6.1.4.1.18086.3080.1.27
The date and time image 0 was installed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

pt3080SystemServiceLED 1.3.6.1.4.1.18086.3080.1.28
Control the Service LED on frontpanel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080SystemLanguage 1.3.6.1.4.1.18086.3080.1.33
Controls which language is used on web and facia. Change requires reboot.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER c(0), da-dk(1), ru-ru(2), es-es(3), pt-br(4), it-it(5), de-de(6), fr-fr(7)  

pt3080SystemType 1.3.6.1.4.1.18086.3080.1.30
The system type to start in on next reboot.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER modulator(0), repeater(1)  

pt3080SystemModulationStandard 1.3.6.1.4.1.18086.3080.1.32
The Modulation Standard to start in on next reboot.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dvbt(0), dvbt2(1), atsc(2), isdbt(3), iboc(4)  

pt3080SystemCurrentImage 1.3.6.1.4.1.18086.3080.1.23
The flash Image the device is currently booted from.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemInstrumentKU 1.3.6.1.4.1.18086.3080.1.1
The instrument serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentType 1.3.6.1.4.1.18086.3080.1.2
The product type designation.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentOptions 1.3.6.1.4.1.18086.3080.1.6
The options installed on this instrument.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemDateTimeSync 1.3.6.1.4.1.18086.3080.1.20
The method used to synchronize system RTC. Mode auto means use gps if available else ntp else manual.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER manual(0), auto(1), gps(2), ntp(3)  

pt3080SystemDateTimeSyncActual 1.3.6.1.4.1.18086.3080.1.31
The actual method used to synchronize system RTC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER manual(0), auto(1), gps(2), ntp(3)  

pt3080SystemTimezone 1.3.6.1.4.1.18086.3080.1.21
The Time Zone used for displaying Data and Time.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentSWRev 1.3.6.1.4.1.18086.3080.1.3
The instrument Software Revision currently running.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentBootLoaderRev 1.3.6.1.4.1.18086.3080.1.4
The instrument Bootloader Software Revision.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemInstrumentKernelRev 1.3.6.1.4.1.18086.3080.1.5
The instrument O/S Kernel Version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemOperationOnTime 1.3.6.1.4.1.18086.3080.1.34
Number of seconds this unit has been turned on since production.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemOperationOnAirTime 1.3.6.1.4.1.18086.3080.1.35
Number of seconds this unit has been unmuted since production.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemOperationNumberOfBoots 1.3.6.1.4.1.18086.3080.1.36
Number of times this unit has been booted since last factory default restore.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemBackplaneid 1.3.6.1.4.1.18086.3080.1.40
ID of the backplane the device is plugged into
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemBackplaneIdRaw 1.3.6.1.4.1.18086.3080.1.41
Raw ID of the backplane the device is plugged into
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemBackplaneIdPcb 1.3.6.1.4.1.18086.3080.1.42
PCB version of the backplane the device is plugged into
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemBackplaneIdCableOptions 1.3.6.1.4.1.18086.3080.1.43
Cable options of the backplane the device is plugged into
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemBackplaneIdMAnuf 1.3.6.1.4.1.18086.3080.1.44
Manufacture ID of the backplane the device is plugged into
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemBackplaneCalibrationDate 1.3.6.1.4.1.18086.3080.1.45
Calibration date of the backplane the device is plugged into
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SystemBackplaneCalibrationSw 1.3.6.1.4.1.18086.3080.1.46
Calibration SW version of the backplane the device is plugged into
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemBackplaneIdPartlist 1.3.6.1.4.1.18086.3080.1.47
Partlist version of the backplane the device is plugged into
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080SystemScheduledActionTable 1.3.6.1.4.1.18086.3080.1.50
This table contains the scheduled actions
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080SystemScheduledActionEntry

pt3080SystemScheduledActionEntry 1.3.6.1.4.1.18086.3080.1.50.1
An entry for the scheduled action
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080SystemScheduledActionEntry  

pt3080SystemScheduledActionID 1.3.6.1.4.1.18086.3080.1.50.1.1
Unique ID for this scheduled action entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..10  

pt3080SystemScheduledActionRecurrence 1.3.6.1.4.1.18086.3080.1.50.1.2
The interval at which this scheduled action entry will be executed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER never(0), immediate(1), once(2), hourly(3), daily(4), weekly(5), monthly(6)  

pt3080SystemScheduledActionHour 1.3.6.1.4.1.18086.3080.1.50.1.3
The recurrence hour used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..23  

pt3080SystemScheduledActionMinute 1.3.6.1.4.1.18086.3080.1.50.1.4
The recurrence minute used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..59  

pt3080SystemScheduledActionWeekday 1.3.6.1.4.1.18086.3080.1.50.1.5
The recurrence weekday used when pt3080SystemScheduledActionRecurrence is weekly.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monday(0), tuesday(1), wednesday(2), thursday(3), friday(4), saturday(5), sunday(6)  

pt3080SystemScheduledActionMonthDay 1.3.6.1.4.1.18086.3080.1.50.1.6
The recurrence day of the monthe used when pt3080SystemScheduledActionRecurrence is monthly.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..31  

pt3080SystemScheduledActionDate 1.3.6.1.4.1.18086.3080.1.50.1.7
The recurrence date used when pt3080SystemScheduledActionRecurrence is once. The format is dd/mm/yyyy.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080SystemScheduledActionRandomDelay 1.3.6.1.4.1.18086.3080.1.50.1.8
An extra random delay added before the action for this entry is executed. A setting of x means that a random delay between 0 and x seconds are added.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..600  

pt3080SystemScheduledActionAction 1.3.6.1.4.1.18086.3080.1.50.1.9
The action for this entry is executed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), repeatermode(1), preset(2), swupgrade(3), reboot(4), mute(5)  

pt3080SystemScheduledActionRepeaterMode 1.3.6.1.4.1.18086.3080.1.50.1.10
The new repeater mode to change to when pt3080SystemScheduledActionAction of type repeatermode is executed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), digital-iso-repeater(1), digital-transposer(2), analog-iso-repeater(3), analog-transposer(4)  

pt3080SystemScheduledActionPresetNo 1.3.6.1.4.1.18086.3080.1.50.1.11
The preset to load when pt3080SystemScheduledActionAction of type preset is executed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), digital-iso-repeater(1), digital-transposer(2), analog-iso-repeater(3), analog-transposer(4)  

pt3080SystemScheduledActionRebootImage 1.3.6.1.4.1.18086.3080.1.50.1.12
The image to reboot to when pt3080SystemScheduledActionAction of type reboot is executed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sameimage(0), otherimage(1), image0(2), image1(3)  

pt3080SystemScheduledActionRebootSystemType 1.3.6.1.4.1.18086.3080.1.50.1.13
The system type to reboot to when pt3080SystemScheduledActionAction of type reboot is executed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER modulator(0), repeater(1), same(2)  

pt3080SystemScheduledActionMute 1.3.6.1.4.1.18086.3080.1.50.1.14
The mute mode to change into when pt3080SystemScheduledActionAction of type mute is executed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080SystemScheduledActionSWUpgradeProtocol 1.3.6.1.4.1.18086.3080.1.50.1.15
The protocol to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER http(0), ftp(1)  

pt3080SystemScheduledActionSWUpgradeUsername 1.3.6.1.4.1.18086.3080.1.50.1.16
The username to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080SystemScheduledActionSWUpgradePassword 1.3.6.1.4.1.18086.3080.1.50.1.17
The password to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080SystemScheduledActionSWUpgradeImageServer 1.3.6.1.4.1.18086.3080.1.50.1.18
The server name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080SystemScheduledActionSWUpgradeImagePath 1.3.6.1.4.1.18086.3080.1.50.1.19
The image path name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080ModeListenBroadcast 1.3.6.1.4.1.18086.3080.2.40
Control wheter to react on broadcast tx id.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeNetwork 1.3.6.1.4.1.18086.3080.2.1
Network mode multi-frequency-network or single-frequency-network
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER network-mode-mfn(0), network-mode-sfn(1)  

pt3080ModeHierarchy 1.3.6.1.4.1.18086.3080.2.2
Hierarchy mode. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER network-hierarchy-none(0), network-hierarchy-h1(1), network-hierarchy-h2(2), network-hierarchy-h4(3)  

pt3080Modeifft 1.3.6.1.4.1.18086.3080.2.3
IFFT 2k, 4k or 8k mode. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ifft-mode-2k(0), ifft-mode-4k(1), ifft-mode-8k(2)  

pt3080ModeCodeRateHighPrio 1.3.6.1.4.1.18086.3080.2.4
High Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER code-rate-1-2(0), code-rate-2-3(1), code-rate-3-4(2), code-rate-5-6(3), code-rate-7-8(4)  

pt3080ModeCodeRateLowPrio 1.3.6.1.4.1.18086.3080.2.5
Low Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER code-rate-1-2(0), code-rate-2-3(1), code-rate-3-4(2), code-rate-5-6(3), code-rate-7-8(4)  

pt3080ModeConstellation 1.3.6.1.4.1.18086.3080.2.6
If QPSK is selected and Hierarchical is <> NONE, then Hierarchical will be forced to NONE. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER qpsk(0), qam16(1), qam64(2)  

pt3080ModeGuardInterval 1.3.6.1.4.1.18086.3080.2.7
Guard Interval. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER guard-1-32(0), guard-1-16(1), guard-1-8(2), guard-1-4(3)  

pt3080ModeCellID 1.3.6.1.4.1.18086.3080.2.8
Sets the Cell ID value. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

pt3080ModeEnableCellID 1.3.6.1.4.1.18086.3080.2.9
Enables Cell ID in the TPS information. Cannot be set if pt3080ModeMipControl is on(1). Cannot be set to off(0) if pt3080ModeEnableDVBH is on(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeDeepInterleaver 1.3.6.1.4.1.18086.3080.2.10
Enables Deep Interleaver. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeEnableDVBH 1.3.6.1.4.1.18086.3080.2.11
Enables DVB-H mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeMpeFecLowPrio 1.3.6.1.4.1.18086.3080.2.12
Enables MPE Fec Low Priority. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeMpeFecHighPrio 1.3.6.1.4.1.18086.3080.2.13
Enables MPE Fec High Priority. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeTimeSlicingLowPrio 1.3.6.1.4.1.18086.3080.2.14
Enables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeTimeSlicingHighPrio 1.3.6.1.4.1.18086.3080.2.15
Enables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeSfnDelayOffset 1.3.6.1.4.1.18086.3080.2.16
SFN delay offset
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -9999999..9999999  

pt3080ModeTxIdent 1.3.6.1.4.1.18086.3080.2.17
The transport stream control identifier
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

pt3080ModeMipControl 1.3.6.1.4.1.18086.3080.2.18
Enables transport stream control of modulator
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeMfnKeepNullPackets 1.3.6.1.4.1.18086.3080.2.19
Enables MFN mode keep null packets option
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeNetworkDelayHP 1.3.6.1.4.1.18086.3080.2.20
Current network delay of HP TS
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeNetworkDelayMinHP 1.3.6.1.4.1.18086.3080.2.21
Minimum network delay of HP TS seen since last reset
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeNetworkDelayMaxHP 1.3.6.1.4.1.18086.3080.2.22
Maximum network delay of HP TS seen since last reset
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeMaxNetworkDelayHP 1.3.6.1.4.1.18086.3080.2.23
Maximum allowed network delay, as received from MIP
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeNetworkDelayMarginHP 1.3.6.1.4.1.18086.3080.2.24
Difference between Actual Network Delay and Max. Allowed Network Delay
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeNetworkDelayLP 1.3.6.1.4.1.18086.3080.2.25
Current network delay of LP TS
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeNetworkDelayMinLP 1.3.6.1.4.1.18086.3080.2.26
Minimum network delay of LP TS seen since last reset
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeNetworkDelayMaxLP 1.3.6.1.4.1.18086.3080.2.27
Maximum network delay of LP TS seen since last reset
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeMaxNetworkDelayLP 1.3.6.1.4.1.18086.3080.2.28
Maximum allowed network delay, as received from MIP
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeNetworkDelayMarginLP 1.3.6.1.4.1.18086.3080.2.29
Difference between Actual Network Delay and Max. Allowed Network Delay
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeNetworkDelayReset 1.3.6.1.4.1.18086.3080.2.30
Reset network delay. Always reads back as noop(0)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), reset(1)  

pt3080ModeDefaultMIPOutputPower 1.3.6.1.4.1.18086.3080.2.31
Default MIP value for Output Power Level. Cannot be set if pt3080ModeMipControlOutputPower is on(1)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

pt3080ModeDefaultMIPOutputTimeOffset 1.3.6.1.4.1.18086.3080.2.32
Default MIP value for Output SFN Time Offset. Cannot be set if pt3080ModeMipControlOutputTimeOffset is on(1)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -9999999..9999999  

pt3080ModeDefaultMIPOutputCellID 1.3.6.1.4.1.18086.3080.2.33
Default MIP value for Output Cell ID. Cannot be set if pt3080ModeMipControlOutputCellId is on(1)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

pt3080ModeDefaultMIPOutputFreqOffset 1.3.6.1.4.1.18086.3080.2.34
Default MIP value for Output frequency Offset. Cannot be set if pt3080ModeMipControlOutputFreqOffset is on(1)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -8388608..8388607  

pt3080ModeMIPMaxSFNDelay 1.3.6.1.4.1.18086.3080.2.35
The MIP value for SFN maximum delay
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ModeMipControlOutputPower 1.3.6.1.4.1.18086.3080.2.36
Enables transport stream control of ModeDefaultMIPOutputPower
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeMipControlOutputTimeOffset 1.3.6.1.4.1.18086.3080.2.37
Enables transport stream control of ModeDefaultMIPOutputTimeOffset
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeMipControlOutputCellId 1.3.6.1.4.1.18086.3080.2.38
Enables transport stream control of ModeDefaultMIPOutputCellId
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ModeMipControlOutputFreqOffset 1.3.6.1.4.1.18086.3080.2.39
Enables transport stream control of ModeDefaultMIPOutputFreqOffset
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ReceptionGainControl 1.3.6.1.4.1.18086.3080.26.9
Controls the gain function mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), freeze(1), manual(2)  

pt3080ReceptionGainManualValue 1.3.6.1.4.1.18086.3080.26.10
Defines manual gain value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..700  

pt3080ReceptionGainLimitEnable 1.3.6.1.4.1.18086.3080.26.11
Controls the Reception RF Gain limit function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ReceptionGainLimit 1.3.6.1.4.1.18086.3080.26.12
Defines gain limit value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 200..700  

pt3080ReceptionGainCurrent 1.3.6.1.4.1.18086.3080.26.13
The current total gain.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ReceptionAGCMode 1.3.6.1.4.1.18086.3080.26.30
Controls the AGC function mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER slow(0), fast(1)  

pt3080ReceptionAGCHysteresis 1.3.6.1.4.1.18086.3080.26.31
Defines the AGC function Hysteresis.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..200  

pt3080ReceptionBandwidth 1.3.6.1.4.1.18086.3080.26.23
Controls reception bandwidth
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER r5(0), r6(1), r7(2), r8(3)  

pt3080ReceptionRFFrequency 1.3.6.1.4.1.18086.3080.26.1
Defines the reception frequency for the tuner.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30000000..954000000  

pt3080ReceptionRFFrequencyOffset 1.3.6.1.4.1.18086.3080.26.2
Defines the offset to be added to the reception frequency for the tuner.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -500000..500000  

pt3080ReceptionRFPolarity 1.3.6.1.4.1.18086.3080.26.24
Controls RF reception Polarity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER norm(0), inv(1)  

pt3080ReceptionRFSquelchEnable 1.3.6.1.4.1.18086.3080.26.6
Controls the squelch function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ReceptionRFSquelchThreshold 1.3.6.1.4.1.18086.3080.26.7
Defines the Squelch function threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -800..-70  

pt3080ReceptionRFSquelchHysteresis 1.3.6.1.4.1.18086.3080.26.8
Defines the Squelch function Hysteresis.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..500  

pt3080ReceptionRFTrackingFilterEnable 1.3.6.1.4.1.18086.3080.26.35
Controls the Reception RF Tracking Filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080ReceptionRFifLevel 1.3.6.1.4.1.18086.3080.26.36
The current if level from the tuner.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ReceptionRFNominalInputLevel 1.3.6.1.4.1.18086.3080.26.37
The nominal input level on the tuner. The dynamic range of the tuner is from 20dB below nominal level to nominal level
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -400..100  

pt3080ReceptionRFInputLevel 1.3.6.1.4.1.18086.3080.26.21
The current RF input level on the tuner.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ReceptionRFInputLevelThreshold 1.3.6.1.4.1.18086.3080.26.26
Defines the Input level threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -8000..-700  

pt3080ReceptionRFInputLevelHysteresis 1.3.6.1.4.1.18086.3080.26.25
Defines the Input Level Hysteresis.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..500  

pt3080ReceptionIFFrequency 1.3.6.1.4.1.18086.3080.26.4
Defines the reception frequency for the tuner.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER if36mhz(0), if36p15mhz(1), if40mhz(2)  

pt3080ReceptionIFPolarity 1.3.6.1.4.1.18086.3080.26.5
Controls IF reception Polarity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER norm(0), inv(1)  

pt3080ReceptionIFInputLevel 1.3.6.1.4.1.18086.3080.26.22
Shows the current IF input level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ReceptionIFInputPolicy 1.3.6.1.4.1.18086.3080.26.3
Controls RF/IF reception Policy
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rf(0), if(1), rfav(2), ifav(3)  

pt3080ReceptionIFInput 1.3.6.1.4.1.18086.3080.26.20
Shows the current RF/IF input selected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER if(0), rf(1)  

pt3080ReceptionIFRFtoIFHoldoverDelay 1.3.6.1.4.1.18086.3080.26.18
The holdover delay for switching reception from RF to IF input.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300  

pt3080ReceptionIFIFtoRFHoldoverDelay 1.3.6.1.4.1.18086.3080.26.19
The holdover delay for switching reception from IF to RF input.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300  

pt3080ReceptionTunerHWVersion 1.3.6.1.4.1.18086.3080.26.40
The tuner HW version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ReceptionTunerHWType 1.3.6.1.4.1.18086.3080.26.41
The tuner HW type.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ReceptionTunerHWID 1.3.6.1.4.1.18086.3080.26.42
The tuner HW ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ReceptionTunerHWSerialNumber 1.3.6.1.4.1.18086.3080.26.43
The tuner HW Serial Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ReceptionTunerHWCalibrationDate 1.3.6.1.4.1.18086.3080.26.44
The tuner HW Calibration Date.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ReceptionTunerHWCalibrationDataVersion 1.3.6.1.4.1.18086.3080.26.45
The tuner HW Calibration Data Version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ReceptionTunerHWCalibrationSWVersion 1.3.6.1.4.1.18086.3080.26.46
The tuner HW Calibration SW Version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ASIInput1SyncTimeout 1.3.6.1.4.1.18086.3080.30.1
Specifies the maximum time accepted between received TS packages.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..250  

pt3080ASIInput2SyncTimeout 1.3.6.1.4.1.18086.3080.30.51
Specifies the maximum time accepted between received TS packages.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..250  

pt3080ASIInput1DataErrorLimit 1.3.6.1.4.1.18086.3080.30.2
Specifies the alarm limit for date error rate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..20000  

pt3080ASIInput2DataErrorLimit 1.3.6.1.4.1.18086.3080.30.52
Specifies the alarm limit for date error rate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..20000  

pt3080ASIInput1SyncStatus 1.3.6.1.4.1.18086.3080.30.3
Current state of the sync detector
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1)  

pt3080ASIInput2SyncStatus 1.3.6.1.4.1.18086.3080.30.53
Current state of the sync detector
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1)  

pt3080ASIInput1SyncSignal 1.3.6.1.4.1.18086.3080.30.4
Current state of the sync detector signal type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undefined(0), norm(1), inv(2)  

pt3080ASIInput2SyncSignal 1.3.6.1.4.1.18086.3080.30.54
Current state of the sync detector signal type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undefined(0), norm(1), inv(2)  

pt3080ASIInput1SyncTSSize 1.3.6.1.4.1.18086.3080.30.5
Current TS packet size determined by the sync detector
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undefined(0), ts188(1), ts204(2)  

pt3080ASIInput2SyncTSSize 1.3.6.1.4.1.18086.3080.30.55
Current TS packet size determined by the sync detector
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undefined(0), ts188(1), ts204(2)  

pt3080ASIInput1LineErrors 1.3.6.1.4.1.18086.3080.30.6
Counts the number of line errors including IDLE stuffing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput2LineErrors 1.3.6.1.4.1.18086.3080.30.56
Counts the number of line errors including IDLE stuffing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput1LineRate 1.3.6.1.4.1.18086.3080.30.7
Current line rate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput2LineRate 1.3.6.1.4.1.18086.3080.30.57
Current line rate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput1LineErrorRate 1.3.6.1.4.1.18086.3080.30.8
Current line error rate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput2LineErrorRate 1.3.6.1.4.1.18086.3080.30.58
Current line error rate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput1DataErrors 1.3.6.1.4.1.18086.3080.30.9
Counts the number of data errors excluding IDLE stuffing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput2DataErrors 1.3.6.1.4.1.18086.3080.30.59
Counts the number of data errors excluding IDLE stuffing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput1DataRate 1.3.6.1.4.1.18086.3080.30.10
Current data rate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput2DataRate 1.3.6.1.4.1.18086.3080.30.60
Current data rate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput1DataErrorRate 1.3.6.1.4.1.18086.3080.30.11
Current data error rate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput2DataErrorRate 1.3.6.1.4.1.18086.3080.30.61
Current data error rate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080ASIInput1ClearErrorCounters 1.3.6.1.4.1.18086.3080.30.12
Clear all error counters and reset all rates
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), activate(1)  

pt3080ASIInput2ClearErrorCounters 1.3.6.1.4.1.18086.3080.30.62
Clear all error counters and reset all rates
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), activate(1)  

pt3080InputRefDevType 1.3.6.1.4.1.18086.3080.3.90
Type of TCXO/OCXO
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tcxo-int(0), ocxo-pt3710-10(1), ocxo-pt3710-20(2)  

pt3080InputRefCalDate 1.3.6.1.4.1.18086.3080.3.91
Calibration Date
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080InputRefCalVer 1.3.6.1.4.1.18086.3080.3.92
Calibration SW Version
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputRefDirection 1.3.6.1.4.1.18086.3080.3.1
monitors the Reference signal direction. state: - inputOutput[inputOutput_INPUT] - inputOutput[inputOutput_OUTPUT]
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER input(0), output(1)  

pt3080InputRefSource 1.3.6.1.4.1.18086.3080.3.2
Defines the input reference synchronisation source. If the value AUTO is chosen, the source is chosen automatically between available sources. The order of choice is GPS->EXT10MHz->INT. If the value EXT is chosen, the external clock is chosen as source If the value INT is chosen, the internal clock is chosen as source. If the value GPS is chosen, the GNSS 1PPS clock is chosen as source.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), ext(1), int(2), gps(3)  

pt3080InputRefStatus 1.3.6.1.4.1.18086.3080.3.11
returns the current input reference synchronisation source.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER external(0), external-10mhz(1), external-1pps(2), internal(3), gnss(4), asi1(5), asi2(6), ndel(7)  

pt3080InputRef10MhzImpedance 1.3.6.1.4.1.18086.3080.3.3
Defines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER o-50(0), himp(1)  

pt3080InputRef10MhzHoldoverDelay 1.3.6.1.4.1.18086.3080.3.7
Defines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..172800  

pt3080InputRef10MhzHoldoverForever 1.3.6.1.4.1.18086.3080.3.8
The holdover delay for input reference source 10MHz failure is forever
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

pt3080InputRef1PPSImpedance 1.3.6.1.4.1.18086.3080.3.4
Defines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER o-50(0), himp(1)  

pt3080InputRef1PPSHoldoverDelay 1.3.6.1.4.1.18086.3080.3.9
Defines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..172800  

pt3080InputRef1PPSHoldoverForever 1.3.6.1.4.1.18086.3080.3.10
The holdover delay for input reference source 1 pps failure is forever
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

pt3080InputRef1PPSTrigSlope 1.3.6.1.4.1.18086.3080.3.5
Defines the trigger edge of the external 1PPS input reference clock. The value is either RISING or FALLING.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rising(0), falling(1)  

pt3080InputRef1PPSTrigLevel 1.3.6.1.4.1.18086.3080.3.6
Defines the trigger level of the external 1PPS input reference clock
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..16  

pt3080InputASIAutoRoutingDelayHp2Lp 1.3.6.1.4.1.18086.3080.3.15
The delay before performing the actual substitution where TS-Primary -> TS-LP and TS-Secondary -> TS-HP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300  

pt3080InputASIAutoRoutingDelayLp2Hp 1.3.6.1.4.1.18086.3080.3.16
The delay before performing the actual substitution where TS-Primary -> TS-HP and TS-Secondary -> TS-LP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300  

pt3080InputASIHoldoverTimeout 1.3.6.1.4.1.18086.3080.3.17
The time ASI Holdover will be active, if seamless ASI switching is not possible
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3600  

pt3080InputASITSPrimarySource 1.3.6.1.4.1.18086.3080.3.12
The TS-Primary input source connector selected
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER asi-in-1(0), asi-in-2(1), demodulator-1(2), demodulator-2(3), tsoip-rx1(4), tsoip-rx2(5), satRecv(6)  

pt3080InputASITSSecondarySource 1.3.6.1.4.1.18086.3080.3.13
The TS-Secondary input source connector selected
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER asi-in-1(0), asi-in-2(1), demodulator-1(2), demodulator-2(3), tsoip-rx1(4), tsoip-rx2(5), satRecv(6)  

pt3080InputASIAutoRoutingPolicy 1.3.6.1.4.1.18086.3080.3.14
The policy to use for TS auto routing
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER only-use-primary(0), only-use-secondary(1), use-primary-if-available(2), use-any-available(3)  

pt3080InputTSPrimaryMaxPATDelay 1.3.6.1.4.1.18086.3080.3.18
The Max delay between the Program Association Table (PAT) on the incomming transport stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..10000  

pt3080InputTSPrimaryMaxPATDelayEnable 1.3.6.1.4.1.18086.3080.3.19
Enables TS switching if the Max delay between PAT table updates has been exceeded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSPrimaryExpectedTSID 1.3.6.1.4.1.18086.3080.3.20
The TS-ID value expected on the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

pt3080InputTSPrimaryExpectedTSIDEnable 1.3.6.1.4.1.18086.3080.3.21
Enables TS switching if the TS-ID is not the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSPrimaryExpectedNWID 1.3.6.1.4.1.18086.3080.3.22
The NW-ID value expected on the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

pt3080InputTSPrimaryExpectedNWIDEnable 1.3.6.1.4.1.18086.3080.3.23
Enables TS switching if the NW-ID is not the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSPrimaryMaxStuffingrate 1.3.6.1.4.1.18086.3080.3.24
The expected stuffing rate on the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

pt3080InputTSPrimaryMaxStuffingrateEnable 1.3.6.1.4.1.18086.3080.3.25
Enables TS switching if the Stuffing rate is over the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSPrimaryMinDelaymargin 1.3.6.1.4.1.18086.3080.3.64
The minimum delay margin of the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

pt3080InputTSPrimaryMinDelaymarginEnable 1.3.6.1.4.1.18086.3080.3.65
Enables TS switching if the Minimum Delay margin is not according to the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSPrimaryMaxMissingmip 1.3.6.1.4.1.18086.3080.3.68
The maximum seconds of missing mip information from the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

pt3080InputTSPrimaryMaxMissingmipEnable 1.3.6.1.4.1.18086.3080.3.69
Enables TS switching if the Maximum missing mip is not according to the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSSecondaryMaxPATDelay 1.3.6.1.4.1.18086.3080.3.27
The Max delay between the Program Association Table (PAT) on the incomming transport stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..10000  

pt3080InputTSSecondaryMaxPATDelayEnable 1.3.6.1.4.1.18086.3080.3.28
Enables TS switching if the Max delay between PAT table updates has been exceeded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSSecondaryExpectedTSID 1.3.6.1.4.1.18086.3080.3.29
The TS-ID value expected on the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

pt3080InputTSSecondaryExpectedTSIDEnable 1.3.6.1.4.1.18086.3080.3.30
Enables TS switching if the TS-ID is not the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSSecondaryExpectedNWID 1.3.6.1.4.1.18086.3080.3.31
The NW-ID value expected on the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

pt3080InputTSSecondaryExpectedNWIDEnable 1.3.6.1.4.1.18086.3080.3.32
Enables TS switching if the NW-ID is not the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSSecondaryMaxStuffingrate 1.3.6.1.4.1.18086.3080.3.33
The expected stuffing rate on the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

pt3080InputTSSecondaryMaxStuffingrateEnable 1.3.6.1.4.1.18086.3080.3.34
Enables TS switching if the Stuffing rate is over the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSSecondaryMinDelaymargin 1.3.6.1.4.1.18086.3080.3.66
The minimum delay margin of the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

pt3080InputTSSecondaryMinDelaymarginEnable 1.3.6.1.4.1.18086.3080.3.67
Enables TS switching if the Minimum Delay margin is not according to the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSSecondaryMaxMissingmip 1.3.6.1.4.1.18086.3080.3.73
The maximum seconds of missing mip information from the incoming TS stream.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

pt3080InputTSSecondaryMaxMissingmipEnable 1.3.6.1.4.1.18086.3080.3.74
Enables TS switching if the Maximum missing mip is not according to the expected value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080InputTSPrimaryMaxStsJitter 1.3.6.1.4.1.18086.3080.3.26
The Max STS jitter on the TS-Primary
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..500  

pt3080InputTSSecondaryMaxStsJitter 1.3.6.1.4.1.18086.3080.3.35
The Max STS jitter on the TS-Secondary
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..500  

pt3080InputTSPrimaryStatus 1.3.6.1.4.1.18086.3080.3.36
The current state for TS-Primary. Unavailable means violation of alarms.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER available(0), unavailable(1), nosync(2)  

pt3080InputTSSecondaryStatus 1.3.6.1.4.1.18086.3080.3.37
The current state for TS-Secondary. Unavailable means violation of alarms.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER available(0), unavailable(1), nosync(2)  

pt3080InputTSHp 1.3.6.1.4.1.18086.3080.3.38
The input source currently On Air. (TS-HP)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER asi-in-1(0), asi-in-2(1), demodulator-1(2), demodulator-2(3), tsoip-rx1(4), tsoip-rx2(5), satRecv(6)  

pt3080InputTSLp 1.3.6.1.4.1.18086.3080.3.39
The input source currently used as backup. (TS-LP)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER asi-in-1(0), asi-in-2(1), demodulator-1(2), demodulator-2(3), tsoip-rx1(4), tsoip-rx2(5), satRecv(6)  

pt3080InputEffectiveAutoroutingPolicy 1.3.6.1.4.1.18086.3080.3.40
Reflects the effective ASI Autorouting Policy
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER only-primary(0), only-secondary(1), prefer-primary(2), any-available(3), seamless(4)  

pt3080InputTSHpBitrate 1.3.6.1.4.1.18086.3080.3.41
Current bitrate for On Air TS. (TS-HP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSHpPacketsBuffered 1.3.6.1.4.1.18086.3080.3.42
Current number of packets buffered for On Air TS (TS-HP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSHpPacketSize 1.3.6.1.4.1.18086.3080.3.43
Current size of packets for On Air TS (TS-HP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSHpStuffingrate 1.3.6.1.4.1.18086.3080.3.44
Current NULL stuffing as a percentage of the current bitrate for On Air TS (TS-HP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSHpTSID 1.3.6.1.4.1.18086.3080.3.45
Current Transport Stream ID for On Air TS. (TS-HP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSHpNWID 1.3.6.1.4.1.18086.3080.3.46
Current Network ID for On Air TS. (TS-HP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSLpBitrate 1.3.6.1.4.1.18086.3080.3.47
Current bitrate for Backup TS. (TS-LP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSLpPacketsBuffered 1.3.6.1.4.1.18086.3080.3.48
Current number of packets buffered for Backup TS. (TS-LP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSLpPacketSize 1.3.6.1.4.1.18086.3080.3.49
Current size of packets for Backup TS. (TS-LP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSLpStuffingrate 1.3.6.1.4.1.18086.3080.3.50
Current NULL stuffing as a percentage of the current bitrate for Backup TS. (TS-LP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSLpTSID 1.3.6.1.4.1.18086.3080.3.51
Current Transport Stream ID for Backup TS. (TS-LP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSLpNWID 1.3.6.1.4.1.18086.3080.3.52
Current Network ID for Backup TS. (TS-LP)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSPrimaryStsJitter 1.3.6.1.4.1.18086.3080.3.53
Current STS jitter on the TS-Primary.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSPrimaryStsJitterMax 1.3.6.1.4.1.18086.3080.3.54
The Maximum STS jitter value seen on the TS-Primary
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSPrimaryStsJitterMin 1.3.6.1.4.1.18086.3080.3.55
The minimum STS jitter value seen on the TS-Primary
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSPrimaryStsJitterReset 1.3.6.1.4.1.18086.3080.3.56
Reset the pt3080InputTSPrimaryStsJitterMax and pt3080InputTSPrimaryStsJitterMin values
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), reset-min-max(1)  

pt3080InputTSSecondaryStsJitter 1.3.6.1.4.1.18086.3080.3.57
Current STS jitter on the TS-Secondary
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSSecondaryStsJitterMax 1.3.6.1.4.1.18086.3080.3.58
The Maximum STS jitter value seen on the TS-Secondary
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSSecondaryStsJitterMin 1.3.6.1.4.1.18086.3080.3.59
The minimum STS jitter value seen on the TS-Secondary
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080InputTSSecondaryStsJitterReset 1.3.6.1.4.1.18086.3080.3.60
Reset the pt3080InputTSSecondaryStsJitterMax and pt3080InputTSSecondaryStsJitterMin values
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), reset-min-max(1)  

pt3080OutputBandwidth 1.3.6.1.4.1.18086.3080.4.4
Output Bandwidth
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..8  

pt3080OutputChannel 1.3.6.1.4.1.18086.3080.4.5
Channel settings
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 21..69  

pt3080OutputSynchronized 1.3.6.1.4.1.18086.3080.4.6
The values of pt3080OutputRfFrequency, pt3080OutputBandwidth and pt3080OutputChannel are synchronized aaccording to freq = (bw * channel) + 306000000.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-synchronized(0), synchronized(1)  

pt3080OutputMute 1.3.6.1.4.1.18086.3080.4.7
Output mute. When set the mute reason UserRequest is ORed into the mute reason set. When read it is the logical OR of all mute reasons
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080OutputPowerLevel 1.3.6.1.4.1.18086.3080.4.9
The desired output power level.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 280..490  

pt3080OutputIfEnable 1.3.6.1.4.1.18086.3080.4.13
Control IF output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

pt3080OutputIfFrequency 1.3.6.1.4.1.18086.3080.4.14
Output Frequency for I/F
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 35150000..37150000  

pt3080OutputIfPolarity 1.3.6.1.4.1.18086.3080.4.15
Control IF output polarity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER norm(0), inv(1)  

pt3080OutputIfLevel 1.3.6.1.4.1.18086.3080.4.16
Output Level for I/F
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1000..0  

pt3080OutputMode 1.3.6.1.4.1.18086.3080.4.1
Control RF output mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), standby(1)  

pt3080OutputEffectiveLevel 1.3.6.1.4.1.18086.3080.4.17
Effective RF Output Level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080OutputActualLevel 1.3.6.1.4.1.18086.3080.4.18
Actual RF Output Level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080OutputPolarity 1.3.6.1.4.1.18086.3080.4.8
Control RF output polarity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER norm(0), inv(1)  

pt3080OutputRfFrequency 1.3.6.1.4.1.18086.3080.4.2
Output RF frequency
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30000000..860000000  

pt3080OutputRfFrequencyOffset 1.3.6.1.4.1.18086.3080.4.10
Output RF frequency offset
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -8388608..8388607  

pt3080OutputRfLevel 1.3.6.1.4.1.18086.3080.4.3
Sets the output level in 0.01dB steps, 0dB is +6dBm on IF, 0dBm on RF
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1000..1000  

pt3080OutputRfCableMode 1.3.6.1.4.1.18086.3080.4.50
Control whether Cable Level loss compensation should be enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), const(1), auto(2)  

pt3080OutputRfCableConstantLevelOffset 1.3.6.1.4.1.18086.3080.4.51
Constant level offset to add to RF Output level. Only used if mode is Constant.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10000..10000  

pt3080OutputRfCableFrequencyLevelOffset0 1.3.6.1.4.1.18086.3080.4.52
Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10000..10000  

pt3080OutputRfCableFrequencyLevelOffset1 1.3.6.1.4.1.18086.3080.4.53
Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10000..10000  

pt3080OutputRfCableFrequencyLevelOffset2 1.3.6.1.4.1.18086.3080.4.54
Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10000..10000  

pt3080OutputRfCableFrequencyLevelOffset3 1.3.6.1.4.1.18086.3080.4.55
Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10000..10000  

pt3080OutputRfCableFrequencyLevelOffset4 1.3.6.1.4.1.18086.3080.4.56
Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10000..10000  

pt3080OutputRfCableFrequencyLevelOffset5 1.3.6.1.4.1.18086.3080.4.57
Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10000..10000  

pt3080OutputRfDetectedActualLevel 1.3.6.1.4.1.18086.3080.4.19
Detected Output Level for RF
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080OutputRfDetectedLowerLevelLimit 1.3.6.1.4.1.18086.3080.4.20
Limit to how much lower the detected RF output level can be than the configured level.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..50  

pt3080OutputRfDetectedLowerLevelcontrol 1.3.6.1.4.1.18086.3080.4.21
Controls whether the lower limit for RF output level is enforced.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080OutputRfDetectedHigherLevelLimit 1.3.6.1.4.1.18086.3080.4.22
Limit to how much higher the detected RF output level can be than the configured level.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..50  

pt3080OutputRfDetectedHigherLevelcontrol 1.3.6.1.4.1.18086.3080.4.23
Controls whether the higher limit for RF output level is enforced.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080OutputRfAlcControl 1.3.6.1.4.1.18086.3080.4.30
Controls whether the ALC system is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080OutputRfAlcSense 1.3.6.1.4.1.18086.3080.4.31
Controls which sense port is used by the ALC system if the ALC is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rfsense1(0), rfsense2(1)  

pt3080OutputRfAlcSetpointPort1 1.3.6.1.4.1.18086.3080.4.32
ALC setpoint for RF Sense Port 1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -11000..11000  

pt3080OutputRfAlcSetpointPort2 1.3.6.1.4.1.18086.3080.4.33
ALC setpoint for RF Sense Port 2
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -11000..11000  

pt3080OutputRfAlcStatus 1.3.6.1.4.1.18086.3080.4.34
Status for whether the ALC system is enabled or disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080OutputRfAlcStatusInformation 1.3.6.1.4.1.18086.3080.4.35
Information on the state of the ALC system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080GpsBias 1.3.6.1.4.1.18086.3080.7.4
Defines the bias to be either on or off for the GPS antenna DC supply (5V or 3V DC). An active GPS antenna requires a power supply i.e. requires this parameter to set to ON.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080GpsbiasVoltage 1.3.6.1.4.1.18086.3080.7.15
Defines the gps antenna bias voltage. An active GPS antenna requires a power supply of either 3V or 5V.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gpsant-5v(0), gpsant-33v(1)  

pt3080GpsCableDelay 1.3.6.1.4.1.18086.3080.7.12
Defines the antenna cable compensation delay. If the GPS antenna is situated far away from the receiver itself the signal will be delayed and must be compensated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -18125..13750  

pt3080GpsHoldoverForever 1.3.6.1.4.1.18086.3080.7.11
Defines whether the GPS system is allowed to operate infinitely (YES) following loss of GPS locking using the internal GPS chip oscillator or not (NO).In case NO is chosen the GPS holdover time applies.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

pt3080GpsHoldoverTime 1.3.6.1.4.1.18086.3080.7.10
Defines the GPS holdover time. This value is ignored if the holdover forever (see below) is set to YES If the GPS locking is lost the system is allowed to continue operating for holdover time seconds using the internal GPS chip oscillator. If - when the holdover time interval expires - the GPS locking it still lost, the GPS operation will be maintained using external timing if present. If external timing is not present the GPS operation will be maintained using the internal motherboard oscillator.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..172800  

pt3080GpsSatelliteSystemGPS 1.3.6.1.4.1.18086.3080.7.16
Controls whether GPS satellites are used to obtain position and timing information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080GpsSatelliteSystemGLONASS 1.3.6.1.4.1.18086.3080.7.17
Controls whether GLONASS satellites are used to obtain position and timing information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080GpsSatelliteSystemGALILEO 1.3.6.1.4.1.18086.3080.7.18
Controls whether GALILEO satellites are used to obtain position and timing information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080GpsSatelliteSystemCOMPASS 1.3.6.1.4.1.18086.3080.7.19
Controls whether COMPASS satellites are used to obtain position and timing information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080GpsVersion 1.3.6.1.4.1.18086.3080.7.9
Returns the GPS chip firmware version as a string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080Gps1PPSStatus 1.3.6.1.4.1.18086.3080.7.1
Returns the current locking state of the GPS system. The value LOCKED indicates that the GPS system is locked to a sufficient number of satellites to perform well. UNLOCKED indicates that it is not. For the GPS system to perform well at least 4 satellites must be visible with a proper signal to noise ratio.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1)  

pt3080GpsState 1.3.6.1.4.1.18086.3080.7.13
Returns a string describing the GPS state. For informational purposes.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080GpsVisibleSatellitesSnr 1.3.6.1.4.1.18086.3080.7.14
Returns the average signal to noise ratio of all visible satellites via the built-in GPS receiver
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080GpsVisibleSatellites 1.3.6.1.4.1.18086.3080.7.2
Returns the number of currently visible satellites via the built-in GPS receiver. A satellite is visible if at all detectable by the GPS system i.e. regardless of signal to noise ratio. Note that the upper value N can change with the launch of new satellites. For some time, however, the GPS system has had a total of 24 satellites.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080GpsTrackedSatellites 1.3.6.1.4.1.18086.3080.7.3
Returns the number of currently tracked satellites via the GPS receiver.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080GpsLongtitude 1.3.6.1.4.1.18086.3080.7.6
Returns - as a string - the current longtitude derived from the received GPS signal(s). The string format is DDD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 180]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes E, W (East, West).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080GpsLatitude 1.3.6.1.4.1.18086.3080.7.7
Returns - as a string - the current latitude derived from the received GPS signal(s). The string format is DD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 90]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes N, S (North, South).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080GpsAltitude 1.3.6.1.4.1.18086.3080.7.8
Returns - as a string - the current altitude derived from the received GPS signal(s). The string format is HHHH.c;. according to the following: HHHH.c denotes the altitude in metres with one digit after the comma. The altitude can be negative.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080TSoIPRx1ReceiverEnable 1.3.6.1.4.1.18086.3080.10.15
Enables the reception of IP/UDP packets with transport stream data to be forward into the modulator.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080TSoIPRx2ReceiverEnable 1.3.6.1.4.1.18086.3080.10.45
Enables the reception of IP/UDP packets with transport stream data to be forward into the modulator.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080TSoIPRx1LanSelect 1.3.6.1.4.1.18086.3080.10.11
Specifies which virtual LAN interface to receive IP/UDP packets from.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flan(0), alan(1), tlan(2), blan(3), plan(4)  

pt3080TSoIPRx2LanSelect 1.3.6.1.4.1.18086.3080.10.41
Specifies which virtual LAN interface to receive IP/UDP packets from.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flan(0), alan(1), tlan(2), blan(3), plan(4)  

pt3080TSoIPRx1Multicast 1.3.6.1.4.1.18086.3080.10.12
Enables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are considdered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080TSoIPRx2Multicast 1.3.6.1.4.1.18086.3080.10.42
Enables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are considdered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080TSoIPRx1Protocol 1.3.6.1.4.1.18086.3080.10.13
Selects which protocol to expect incoming packets to have.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER udp(0), rtp(1), auto(2)  

pt3080TSoIPRx2Protocol 1.3.6.1.4.1.18086.3080.10.43
Selects which protocol to expect incoming packets to have.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER udp(0), rtp(1), auto(2)  

pt3080TSoIPRx1Portnumber 1.3.6.1.4.1.18086.3080.10.14
Specifies which UDP port number to receive IP/UDP packets from.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080TSoIPRx2Portnumber 1.3.6.1.4.1.18086.3080.10.44
Specifies which UDP port number to receive IP/UDP packets from.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080TSoIPRx1PacketErrorRatioLimit 1.3.6.1.4.1.18086.3080.10.16
Specifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..500  

pt3080TSoIPRx2PacketErrorRatioLimit 1.3.6.1.4.1.18086.3080.10.46
Specifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..500  

pt3080TSoIPRx1MinumimLatency 1.3.6.1.4.1.18086.3080.10.10
Specifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..5000  

pt3080TSoIPRx2MinumimLatency 1.3.6.1.4.1.18086.3080.10.40
Specifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..5000  

pt3080TSoIPRx1SyncTimeout 1.3.6.1.4.1.18086.3080.10.9
Specifies the maximum time accepted between received TS packages.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 16..250  

pt3080TSoIPRx2SyncTimeout 1.3.6.1.4.1.18086.3080.10.39
Specifies the maximum time accepted between received TS packages.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 16..250  

pt3080TSoIPRx1Status 1.3.6.1.4.1.18086.3080.10.17
The current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), disabled(2)  

pt3080TSoIPRx2Status 1.3.6.1.4.1.18086.3080.10.47
The current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), disabled(2)  

pt3080TSoIPRx1CurrentIPAddress 1.3.6.1.4.1.18086.3080.10.18
The current receive IP address for the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080TSoIPRx2CurrentIPAddress 1.3.6.1.4.1.18086.3080.10.48
The current receive IP address for the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080TSoIPRx1IpBitrate 1.3.6.1.4.1.18086.3080.10.26
Shows the current bitrate of uncoming traffic for this UDP port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2IpBitrate 1.3.6.1.4.1.18086.3080.10.56
Shows the current bitrate of uncoming traffic for this UDP port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1PacketErrorRatio 1.3.6.1.4.1.18086.3080.10.20
Shows the current error ratio of uncoming traffic for this UDP port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2PacketErrorRatio 1.3.6.1.4.1.18086.3080.10.50
Shows the current error ratio of uncoming traffic for this UDP port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1SequenceErrors 1.3.6.1.4.1.18086.3080.10.19
The number of sequence errors on this channel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2SequenceErrors 1.3.6.1.4.1.18086.3080.10.49
The number of sequence errors on this channel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1LostIPFrames 1.3.6.1.4.1.18086.3080.10.21
The number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this statistic.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2LostIPFrames 1.3.6.1.4.1.18086.3080.10.51
The number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this statistic.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1CorrectedIPFrames 1.3.6.1.4.1.18086.3080.10.22
The number of corrected IP frames (via FEC) on this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2CorrectedIPFrames 1.3.6.1.4.1.18086.3080.10.52
The number of corrected IP frames (via FEC) on this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1OverrunIPFrames 1.3.6.1.4.1.18086.3080.10.30
The number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the incoming rate of TSoIP data.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2OverrunIPFrames 1.3.6.1.4.1.18086.3080.10.60
The number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the incoming rate of TSoIP data.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1PacketsPerFrame 1.3.6.1.4.1.18086.3080.10.25
The curent number of TS packets per IP frames on this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2PacketsPerFrame 1.3.6.1.4.1.18086.3080.10.55
The curent number of TS packets per IP frames on this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1TSPacketSize 1.3.6.1.4.1.18086.3080.10.29
The curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2TSPacketSize 1.3.6.1.4.1.18086.3080.10.59
The curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1FecColumn 1.3.6.1.4.1.18086.3080.10.23
The curent FEC Column (L) number for this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2FecColumn 1.3.6.1.4.1.18086.3080.10.53
The curent FEC Column (L) number for this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1FecRow 1.3.6.1.4.1.18086.3080.10.24
The curent FEC Row (D) number for this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2FecRow 1.3.6.1.4.1.18086.3080.10.54
The curent FEC Row (D) number for this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1QueueSize 1.3.6.1.4.1.18086.3080.10.27
The curent queue size for this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2QueueSize 1.3.6.1.4.1.18086.3080.10.57
The curent queue size for this cannel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx1CurrentLatency 1.3.6.1.4.1.18086.3080.10.28
The current latency incurrent by queue size on this channel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TSoIPRx2CurrentLatency 1.3.6.1.4.1.18086.3080.10.58
The current latency incurrent by queue size on this channel on the TSoIP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080MonitorSource 1.3.6.1.4.1.18086.3080.12.1
Selects the source to be monitored on the ASI monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER asi-in1(0), asi-in2(1), aux1(2), aux2(3), tsoiprx1(4), tsoiprx2(5), ts-hp(6), ts-lp(7), backplane1(8), backplane2(9)  

pt3080MonitorTSoIPEnable 1.3.6.1.4.1.18086.3080.12.10
Enable or disable the generation of monitor data over TSoIP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080MonitorTSoIPSource 1.3.6.1.4.1.18086.3080.12.11
Selects the source to be monitored on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER asi-in1(0), asi-in2(1), aux1(2), aux2(3), tsoiprx1(4), tsoiprx2(5), ts-hp(6), ts-lp(7), backplane1(8), backplane2(9)  

pt3080MonitorTSoIPMulticastLanSelect 1.3.6.1.4.1.18086.3080.12.25
Specifies which virtual LAN interface to transmit Multicast IP/UDP packets out via.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flan(0), alan(1), tlan(2), blan(3), plan(4)  

pt3080MonitorTSoIPDestIPAddress 1.3.6.1.4.1.18086.3080.12.12
Selects the destination IP address of the data to be monitored on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080MonitorTSoIPDestPort 1.3.6.1.4.1.18086.3080.12.13
Selects the destination UDP Port number of the data to be monitored on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080MonitorTSoIPProtocol 1.3.6.1.4.1.18086.3080.12.14
Selects the protocol to be used on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER udp(0), rtp(1)  

pt3080MonitorTSoIPEnableFec 1.3.6.1.4.1.18086.3080.12.15
Enable or disable FEC protocol on the output data from the TSoIP Monitor.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080MonitorTSoIPFecColumn 1.3.6.1.4.1.18086.3080.12.16
Selects the FEC protocoll Column number (L) of the data to be monitored on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..20  

pt3080MonitorTSoIPFecRow 1.3.6.1.4.1.18086.3080.12.17
Selects the FEC protocol Row number (D) of the data to be monitored on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 4..20  

pt3080MonitorTSoIPFecSkew 1.3.6.1.4.1.18086.3080.12.18
Selects the FEC protocol Skew (non block alignment of FEC Frame) of the data to be monitored on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4  

pt3080MonitorTSoIPKeepNullPackets 1.3.6.1.4.1.18086.3080.12.19
Retain or discard Null packets of the generation of monitor data over TSoIP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080MonitorTSoIPPacketsPerFrame 1.3.6.1.4.1.18086.3080.12.20
Set the number of TS packets to send per IP frame on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..7  

pt3080MonitorTSoIPUDPChecksum 1.3.6.1.4.1.18086.3080.12.21
Generate UDP checksum in the outgoing packets of the TSoIP Monitor.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080MonitorTSoIPDSCP 1.3.6.1.4.1.18086.3080.12.22
Selects the value of the TOS/DSCP field in IP packets to be sent on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

pt3080MonitorTSoIPTTL 1.3.6.1.4.1.18086.3080.12.23
Selects the value of the TTL (Time-To-Live) field in IP packets to be sent on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

pt3080MonitorTSoIPGenerateError 1.3.6.1.4.1.18086.3080.12.24
Artificially generate an error rate as a percentage of frames lost on the TSoIP monitor output.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

pt3080MonitorTSoIPIpBitrate 1.3.6.1.4.1.18086.3080.12.30
The current rate IP packets traffic to be sent on the TSoIP monitor output.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080MonitorTSoIPTSSize 1.3.6.1.4.1.18086.3080.12.32
The current TS packet size (188 or 204) on the TSoIP monitor output.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080MonitorTSoIPLostIPFrames 1.3.6.1.4.1.18086.3080.12.31
The number of IP packets traffic generated but lost on the TSoIP monitor output.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080TestEnable 1.3.6.1.4.1.18086.3080.13.1
controls the test signal generation. This cannot be used when network mode is SFN. Only a subset is available in repeater mode. test signal output state: - testSignalsArray[testSignals_OFF] Normal operation. No test signal. - testSignalsArray[testSignals_SCAR] A single carrier output is provided. - testSignalsArray[testSignals_SWEEP2] A test signal with full spectrum bandwidth and a 3dB peak to average power ratio. (OFDM PPR-3). - testSignalsArray[testSignals_PRBSON] Forced transmission of stuffing data only (null packets) irrespective of the status of the MPEG-2 transport stream input. - testSignalsArray[testSignals_PRBSAUTO] Automatic transmission of spectrum based on stuffing data when no MPEG-2 TS input is available.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), scar(1), sweep2(2), prbs-on(3), prbs-auto(4)  

pt3080TestEnableReconnect 1.3.6.1.4.1.18086.3080.13.2
Controls whether the test signal shall reconnect after reset. This value is saved in non-volatile memory and thus survives a reboot. - onOffArray[TEXT_INDEX_OFF] The selected test signal will be set to OFF after reset. - onOffArray[TEXT_INDEX_ON] The selected test signal will be output after reset.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080TestScarrierLevel 1.3.6.1.4.1.18086.3080.13.3
Control level of the single carrier test signal.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

pt3080TestscarrierFrequencyOffset 1.3.6.1.4.1.18086.3080.13.4
Control frequency offset of the single carrier test signal.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -4000000..4000000  

pt3080GroupAlarmTable 1.3.6.1.4.1.18086.3080.14.1
This table contains the group alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080GroupAlarmEntry

pt3080GroupAlarmEntry 1.3.6.1.4.1.18086.3080.14.1.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080GroupAlarmEntry  

pt3080GroupAlarmID 1.3.6.1.4.1.18086.3080.14.1.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080GroupAlarmDescription 1.3.6.1.4.1.18086.3080.14.1.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080GroupAlarmState 1.3.6.1.4.1.18086.3080.14.1.1.3
Current GroupAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080GroupAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.1.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GroupAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.1.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GroupAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.1.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GroupAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.1.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GroupAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.1.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GroupAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.1.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GroupAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.1.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080ASITSPrimaryAlarmTable 1.3.6.1.4.1.18086.3080.14.5
This table contains the ASI TS-Primary alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080ASITSPrimaryAlarmEntry

pt3080ASITSPrimaryAlarmEntry 1.3.6.1.4.1.18086.3080.14.5.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080ASITSPrimaryAlarmEntry  

pt3080ASITSPrimaryAlarmID 1.3.6.1.4.1.18086.3080.14.5.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080ASITSPrimaryAlarmDescription 1.3.6.1.4.1.18086.3080.14.5.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ASITSPrimaryAlarmState 1.3.6.1.4.1.18086.3080.14.5.1.3
Current ASITSPrimaryAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080ASITSPrimaryAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.5.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSPrimaryAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.5.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSPrimaryAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.5.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSPrimaryAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.5.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSPrimaryAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.5.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSPrimaryAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.5.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSPrimaryAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.5.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080ASITSSecondaryAlarmTable 1.3.6.1.4.1.18086.3080.14.6
This table contains the ASI alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080ASITSSecondaryAlarmEntry

pt3080ASITSSecondaryAlarmEntry 1.3.6.1.4.1.18086.3080.14.6.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080ASITSSecondaryAlarmEntry  

pt3080ASITSSecondaryAlarmID 1.3.6.1.4.1.18086.3080.14.6.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080ASITSSecondaryAlarmDescription 1.3.6.1.4.1.18086.3080.14.6.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ASITSSecondaryAlarmState 1.3.6.1.4.1.18086.3080.14.6.1.3
Current ASITSSecondaryAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080ASITSSecondaryAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.6.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSSecondaryAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.6.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSSecondaryAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.6.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSSecondaryAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.6.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSSecondaryAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.6.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSSecondaryAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.6.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASITSSecondaryAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.6.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080SFNAlarmTable 1.3.6.1.4.1.18086.3080.14.7
This table contains the SFN alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080SFNAlarmEntry

pt3080SFNAlarmEntry 1.3.6.1.4.1.18086.3080.14.7.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080SFNAlarmEntry  

pt3080SFNAlarmID 1.3.6.1.4.1.18086.3080.14.7.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080SFNAlarmDescription 1.3.6.1.4.1.18086.3080.14.7.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080SFNAlarmState 1.3.6.1.4.1.18086.3080.14.7.1.3
Current SFNAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080SFNAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.7.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080SFNAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.7.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080SFNAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.7.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080SFNAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.7.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080SFNAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.7.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080SFNAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.7.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080SFNAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.7.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080ReferenceAlarmTable 1.3.6.1.4.1.18086.3080.14.8
This table contains the Reference alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080ReferenceAlarmEntry

pt3080ReferenceAlarmEntry 1.3.6.1.4.1.18086.3080.14.8.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080ReferenceAlarmEntry  

pt3080ReferenceAlarmID 1.3.6.1.4.1.18086.3080.14.8.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080ReferenceAlarmDescription 1.3.6.1.4.1.18086.3080.14.8.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ReferenceAlarmState 1.3.6.1.4.1.18086.3080.14.8.1.3
Current ReferenceAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080ReferenceAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.8.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ReferenceAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.8.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ReferenceAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.8.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ReferenceAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.8.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ReferenceAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.8.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ReferenceAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.8.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ReferenceAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.8.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080RFAlarmTable 1.3.6.1.4.1.18086.3080.14.9
This table contains the RF alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080RFAlarmEntry

pt3080RFAlarmEntry 1.3.6.1.4.1.18086.3080.14.9.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080RFAlarmEntry  

pt3080RFAlarmID 1.3.6.1.4.1.18086.3080.14.9.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080RFAlarmDescription 1.3.6.1.4.1.18086.3080.14.9.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080RFAlarmState 1.3.6.1.4.1.18086.3080.14.9.1.3
Current RFAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080RFAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.9.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080RFAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.9.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080RFAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.9.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080RFAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.9.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080RFAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.9.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080RFAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.9.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080RFAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.9.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080GPSAlarmTable 1.3.6.1.4.1.18086.3080.14.10
This table contains the GPS alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080GPSAlarmEntry

pt3080GPSAlarmEntry 1.3.6.1.4.1.18086.3080.14.10.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080GPSAlarmEntry  

pt3080GPSAlarmID 1.3.6.1.4.1.18086.3080.14.10.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080GPSAlarmDescription 1.3.6.1.4.1.18086.3080.14.10.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080GPSAlarmState 1.3.6.1.4.1.18086.3080.14.10.1.3
Current GPSAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080GPSAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.10.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GPSAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.10.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GPSAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.10.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GPSAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.10.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GPSAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.10.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GPSAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.10.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080GPSAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.10.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080TSoIPAlarmTable 1.3.6.1.4.1.18086.3080.14.12
This table contains the TSoIP alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080TSoIPAlarmEntry

pt3080TSoIPAlarmEntry 1.3.6.1.4.1.18086.3080.14.12.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080TSoIPAlarmEntry  

pt3080TSoIPAlarmID 1.3.6.1.4.1.18086.3080.14.12.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080TSoIPAlarmDescription 1.3.6.1.4.1.18086.3080.14.12.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080TSoIPAlarmState 1.3.6.1.4.1.18086.3080.14.12.1.3
Current TSoIPAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080TSoIPAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.12.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080TSoIPAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.12.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080TSoIPAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.12.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080TSoIPAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.12.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080TSoIPAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.12.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080TSoIPAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.12.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080TSoIPAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.12.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080ExternalAlarmTable 1.3.6.1.4.1.18086.3080.14.13
This table contains the External alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080ExternalAlarmEntry

pt3080ExternalAlarmEntry 1.3.6.1.4.1.18086.3080.14.13.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080ExternalAlarmEntry  

pt3080ExternalAlarmID 1.3.6.1.4.1.18086.3080.14.13.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080ExternalAlarmDescription 1.3.6.1.4.1.18086.3080.14.13.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ExternalAlarmState 1.3.6.1.4.1.18086.3080.14.13.1.3
Current ExternalAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080ExternalAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.13.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ExternalAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.13.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ExternalAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.13.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ExternalAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.13.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ExternalAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.13.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ExternalAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.13.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ExternalAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.13.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080HWMonitorAlarmTable 1.3.6.1.4.1.18086.3080.14.14
This table contains the HW Monitor alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080HWMonitorAlarmEntry

pt3080HWMonitorAlarmEntry 1.3.6.1.4.1.18086.3080.14.14.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080HWMonitorAlarmEntry  

pt3080HWMonitorAlarmID 1.3.6.1.4.1.18086.3080.14.14.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080HWMonitorAlarmDescription 1.3.6.1.4.1.18086.3080.14.14.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080HWMonitorAlarmState 1.3.6.1.4.1.18086.3080.14.14.1.3
Current HWMonitorAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080HWMonitorAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.14.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080HWMonitorAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.14.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080HWMonitorAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.14.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080HWMonitorAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.14.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080HWMonitorAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.14.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080HWMonitorAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.14.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080HWMonitorAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.14.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080CommsAlarmTable 1.3.6.1.4.1.18086.3080.14.15
This table contains the Communication alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080CommsAlarmEntry

pt3080CommsAlarmEntry 1.3.6.1.4.1.18086.3080.14.15.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080CommsAlarmEntry  

pt3080CommsAlarmID 1.3.6.1.4.1.18086.3080.14.15.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080CommsAlarmDescription 1.3.6.1.4.1.18086.3080.14.15.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080CommsAlarmState 1.3.6.1.4.1.18086.3080.14.15.1.3
Current CommsAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080CommsAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.15.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080CommsAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.15.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080CommsAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.15.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080CommsAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.15.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080CommsAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.15.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080CommsAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.15.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080CommsAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.15.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080ASIAlarmTable 1.3.6.1.4.1.18086.3080.14.16
This table contains the ASI alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080ASIAlarmEntry

pt3080ASIAlarmEntry 1.3.6.1.4.1.18086.3080.14.16.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080ASIAlarmEntry  

pt3080ASIAlarmID 1.3.6.1.4.1.18086.3080.14.16.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080ASIAlarmDescription 1.3.6.1.4.1.18086.3080.14.16.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080ASIAlarmState 1.3.6.1.4.1.18086.3080.14.16.1.3
Current ASIAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080ASIAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.16.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASIAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.16.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASIAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.16.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASIAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.16.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASIAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.16.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASIAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.16.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080ASIAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.16.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080DemodulatorAlarmTable 1.3.6.1.4.1.18086.3080.14.17
This table contains the Demodulator alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080DemodulatorAlarmEntry

pt3080DemodulatorAlarmEntry 1.3.6.1.4.1.18086.3080.14.17.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080DemodulatorAlarmEntry  

pt3080DemodulatorAlarmID 1.3.6.1.4.1.18086.3080.14.17.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080DemodulatorAlarmDescription 1.3.6.1.4.1.18086.3080.14.17.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080DemodulatorAlarmState 1.3.6.1.4.1.18086.3080.14.17.1.3
Current DemodulatorAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080DemodulatorAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.17.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080DemodulatorAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.17.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080DemodulatorAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.17.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080DemodulatorAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.17.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080DemodulatorAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.17.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080DemodulatorAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.17.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080DemodulatorAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.17.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080InternalAlarmTable 1.3.6.1.4.1.18086.3080.14.18
This table contains the Internal alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080InternalAlarmEntry

pt3080InternalAlarmEntry 1.3.6.1.4.1.18086.3080.14.18.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080InternalAlarmEntry  

pt3080InternalAlarmID 1.3.6.1.4.1.18086.3080.14.18.1.1
Unique ID for this alarm
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

pt3080InternalAlarmDescription 1.3.6.1.4.1.18086.3080.14.18.1.2
Description for this alarm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080InternalAlarmState 1.3.6.1.4.1.18086.3080.14.18.1.3
Current InternalAlarm state condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080InternalAlarmActionEventlog 1.3.6.1.4.1.18086.3080.14.18.1.4
Will the current alarm generate an event in the eventlog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080InternalAlarmActionRelay1 1.3.6.1.4.1.18086.3080.14.18.1.5
Will the current alarm activate relay1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080InternalAlarmActionRelay2 1.3.6.1.4.1.18086.3080.14.18.1.6
Will the current alarm activate relay2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080InternalAlarmActionTrap 1.3.6.1.4.1.18086.3080.14.18.1.7
Will the current alarm generate a trap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080InternalAlarmActionEmail 1.3.6.1.4.1.18086.3080.14.18.1.8
Will the current alarm generate an email
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080InternalAlarmActionAlarmLED 1.3.6.1.4.1.18086.3080.14.18.1.9
Will the current alarm turn Alarm LED on frontpanel on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pt3080InternalAlarmActionForceMode 1.3.6.1.4.1.18086.3080.14.18.1.10
Will the current alarm mute output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), mute(1), reboot(2)  

pt3080PresetTable 1.3.6.1.4.1.18086.3080.15.1
This table contains the presets
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080PresetEntry

pt3080PresetEntry 1.3.6.1.4.1.18086.3080.15.1.1
An entry for the presets
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080PresetEntry  

pt3080PresetNo 1.3.6.1.4.1.18086.3080.15.1.1.1
Unique number for this preset
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..10  

pt3080PresetName 1.3.6.1.4.1.18086.3080.15.1.1.2
Name for this preset
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080PresetRecall 1.3.6.1.4.1.18086.3080.15.2
Install this preset into current running parameter set. Value will always read as 0 and setting it to 0 has no effect.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10  

pt3080PresetStore 1.3.6.1.4.1.18086.3080.15.3
Store the currently running parameter set into this preset Value will always read as 0 and setting it to 0 has no effect.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8  

pt3080EventlogTable 1.3.6.1.4.1.18086.3080.16.1
This table contains the group alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080EventlogEntry

pt3080EventlogEntry 1.3.6.1.4.1.18086.3080.16.1.1
An entry for the alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080EventlogEntry  

pt3080EventlogNo 1.3.6.1.4.1.18086.3080.16.1.1.1
Unique number for this event
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2047  

pt3080EventlogID 1.3.6.1.4.1.18086.3080.16.1.1.2
Unique ID for this type of event
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080EventlogTimestamp 1.3.6.1.4.1.18086.3080.16.1.1.3
Timestamp for this event
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

pt3080EventlogText 1.3.6.1.4.1.18086.3080.16.1.1.4
Text for this event
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080EventlogClear 1.3.6.1.4.1.18086.3080.16.2
Clear the entire eventlog by setting the value to 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), clear(1)  

pt3080EventlogEnable 1.3.6.1.4.1.18086.3080.16.3
Enable eventlog by setting the value to 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080EventlogMode 1.3.6.1.4.1.18086.3080.16.4
Set eventlog mode to FIFO for keeping the newest entries. Set eventlog mode to FULL for keeping the oldest entries.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fifo(0), full(1)  

pt3080CommsAlarmEmailReceiver 1.3.6.1.4.1.18086.3080.17.34
The email address of the receipiant of alarm emails.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsSeparatedSwitchPorts 1.3.6.1.4.1.18086.3080.17.98
Will the ports on the switch in the backplane forward LAN traffic to each other or will they be separated and only forward traffic to/from the modulator/repeater.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080CommsBroadcastStormProtection 1.3.6.1.4.1.18086.3080.17.94
Enable/Disable broadcast (and multicast) storm Protection. This will limit the network ingress rate on physical Ethernet port 0 and 1 to roughly 100mbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080CommsLocalPhysicalInterface 1.3.6.1.4.1.18086.3080.17.80
The Physical Ethernet Interface of this (virtual) interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eth0(0), eth1(1), eth2(2), eth3(3), eth4(4)  

pt3080CommsLocalDhcpMode 1.3.6.1.4.1.18086.3080.17.3
Enable/Disable DHCP client on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), client(1)  

pt3080CommsLocalStaticIpAddr 1.3.6.1.4.1.18086.3080.17.1
The static IP address for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalStaticNetmask 1.3.6.1.4.1.18086.3080.17.2
The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalIpMulticastAddr 1.3.6.1.4.1.18086.3080.17.100
The IP Multicast address for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalIpMulticastSourceFilterMode 1.3.6.1.4.1.18086.3080.17.190
Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sfinclude(0), sfexclude(1)  

pt3080CommsLocalIpMulticastSourceFilterAddress1 1.3.6.1.4.1.18086.3080.17.200
The IP Multicast Source Filter address no 1 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalIpMulticastSourceFilterAddress2 1.3.6.1.4.1.18086.3080.17.201
The IP Multicast Source Filter address no 2 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalIpMulticastSourceFilterAddress3 1.3.6.1.4.1.18086.3080.17.202
The IP Multicast Source Filter address no 3 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalIpMulticastSourceFilterAddress4 1.3.6.1.4.1.18086.3080.17.203
The IP Multicast Source Filter address no 4 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalIpMulticastSourceFilterAddress5 1.3.6.1.4.1.18086.3080.17.204
The IP Multicast Source Filter address no 5 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalIpMulticastSourceFilterAddress6 1.3.6.1.4.1.18086.3080.17.205
The IP Multicast Source Filter address no 6 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalVlanEnable 1.3.6.1.4.1.18086.3080.17.101
Enable/Disable VLAN on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsLocalVlanId 1.3.6.1.4.1.18086.3080.17.102
VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4095  

pt3080CommsLocalServiceSNMP 1.3.6.1.4.1.18086.3080.17.103
Enable/Disable SNMP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsLocalServiceSCPI 1.3.6.1.4.1.18086.3080.17.104
Enable/Disable SCPI service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsLocalServiceTSoIP 1.3.6.1.4.1.18086.3080.17.105
Enable/Disable TSoIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsLocalServiceRIP 1.3.6.1.4.1.18086.3080.17.106
Enable/Disable RIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsLocalCurrentIpAddr 1.3.6.1.4.1.18086.3080.17.4
The current IP address for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsLocalCurrentNetmask 1.3.6.1.4.1.18086.3080.17.5
The current IP netmask for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteEnable 1.3.6.1.4.1.18086.3080.17.117
Enable/Disable this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsRemotePhysicalInterface 1.3.6.1.4.1.18086.3080.17.81
The Physical Ethernet Interface of this (virtual) interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eth0(0), eth1(1), eth2(2), eth3(3), eth4(4)  

pt3080CommsRemoteDhcpMode 1.3.6.1.4.1.18086.3080.17.73
Enable/Disable DHCP client on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), client(1)  

pt3080CommsRemoteStaticIpAddr 1.3.6.1.4.1.18086.3080.17.7
The static IP address for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteStaticNetmask 1.3.6.1.4.1.18086.3080.17.8
The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteIpMulticastAddr 1.3.6.1.4.1.18086.3080.17.110
The IP Multicast address for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteIpMulticastSourceFilterMode 1.3.6.1.4.1.18086.3080.17.191
Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sfinclude(0), sfexclude(1)  

pt3080CommsRemoteIpMulticastSourceFilterAddress1 1.3.6.1.4.1.18086.3080.17.220
The IP Multicast Source Filter address no 1 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteIpMulticastSourceFilterAddress2 1.3.6.1.4.1.18086.3080.17.221
The IP Multicast Source Filter address no 2 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteIpMulticastSourceFilterAddress3 1.3.6.1.4.1.18086.3080.17.222
The IP Multicast Source Filter address no 3 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteIpMulticastSourceFilterAddress4 1.3.6.1.4.1.18086.3080.17.223
The IP Multicast Source Filter address no 4 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteIpMulticastSourceFilterAddress5 1.3.6.1.4.1.18086.3080.17.224
The IP Multicast Source Filter address no 5 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteIpMulticastSourceFilterAddress6 1.3.6.1.4.1.18086.3080.17.225
The IP Multicast Source Filter address no 6 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteVlanEnable 1.3.6.1.4.1.18086.3080.17.111
Enable/Disable VLAN on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsRemoteVlanId 1.3.6.1.4.1.18086.3080.17.112
VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4095  

pt3080CommsRemoteServiceSNMP 1.3.6.1.4.1.18086.3080.17.113
Enable/Disable SNMP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsRemoteServiceSCPI 1.3.6.1.4.1.18086.3080.17.114
Enable/Disable SCPI service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsRemoteServiceTSoIP 1.3.6.1.4.1.18086.3080.17.115
Enable/Disable TSoIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsRemoteServiceWeb 1.3.6.1.4.1.18086.3080.17.116
Enable/Disable WEB (http) service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsRemoteServiceRIP 1.3.6.1.4.1.18086.3080.17.118
Enable/Disable RIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsRemoteCurrentIpAddr 1.3.6.1.4.1.18086.3080.17.10
The current IP address for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsRemoteCurrentNetmask 1.3.6.1.4.1.18086.3080.17.11
The current IP netmask for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminEnable 1.3.6.1.4.1.18086.3080.17.127
Enable/Disable this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsGbeAdminPhysicalInterface 1.3.6.1.4.1.18086.3080.17.82
The Physical Ethernet Interface of this (virtual) interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eth0(0), eth1(1), eth2(2), eth3(3), eth4(4)  

pt3080CommsGbeAdminDhcpMode 1.3.6.1.4.1.18086.3080.17.74
Enable/Disable DHCP client on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), client(1)  

pt3080CommsGbeAdminStaticIpAddr 1.3.6.1.4.1.18086.3080.17.13
The static IP address for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminStaticNetmask 1.3.6.1.4.1.18086.3080.17.14
The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminIpMulticastAddr 1.3.6.1.4.1.18086.3080.17.120
The IP Multicast address for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminIpMulticastSourceFilterMode 1.3.6.1.4.1.18086.3080.17.192
Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sfinclude(0), sfexclude(1)  

pt3080CommsGbeAdminIpMulticastSourceFilterAddress1 1.3.6.1.4.1.18086.3080.17.230
The IP Multicast Source Filter address no 1 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminIpMulticastSourceFilterAddress2 1.3.6.1.4.1.18086.3080.17.231
The IP Multicast Source Filter address no 2 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminIpMulticastSourceFilterAddress3 1.3.6.1.4.1.18086.3080.17.232
The IP Multicast Source Filter address no 3 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminIpMulticastSourceFilterAddress4 1.3.6.1.4.1.18086.3080.17.233
The IP Multicast Source Filter address no 4 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminIpMulticastSourceFilterAddress5 1.3.6.1.4.1.18086.3080.17.234
The IP Multicast Source Filter address no 5 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminIpMulticastSourceFilterAddress6 1.3.6.1.4.1.18086.3080.17.235
The IP Multicast Source Filter address no 6 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminVlanEnable 1.3.6.1.4.1.18086.3080.17.121
Enable/Disable VLAN on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsGbeAdminVlanId 1.3.6.1.4.1.18086.3080.17.122
VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4095  

pt3080CommsGbeAdminServiceSNMP 1.3.6.1.4.1.18086.3080.17.123
Enable/Disable SNMP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsGbeAdminServiceSCPI 1.3.6.1.4.1.18086.3080.17.124
Enable/Disable SCPI service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsGbeAdminServiceTSoIP 1.3.6.1.4.1.18086.3080.17.125
Enable/Disable TSoIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsGbeAdminServiceWeb 1.3.6.1.4.1.18086.3080.17.126
Enable/Disable Web (http) service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsGbeAdminServiceRIP 1.3.6.1.4.1.18086.3080.17.128
Enable/Disable RIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsGbeAdminCurrentIpAddr 1.3.6.1.4.1.18086.3080.17.16
The current IP address for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsGbeAdminCurrentNetmask 1.3.6.1.4.1.18086.3080.17.17
The current IP netmask for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupEnable 1.3.6.1.4.1.18086.3080.17.150
Enable/Disable this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsBackupPhysicalInterface 1.3.6.1.4.1.18086.3080.17.151
The Physical Ethernet Interface of this (virtual) interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eth0(0), eth1(1), eth2(2), eth3(3), eth4(4)  

pt3080CommsBackupDhcpMode 1.3.6.1.4.1.18086.3080.17.75
Enable/Disable DHCP client on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), client(1)  

pt3080CommsBackupStaticIpAddr 1.3.6.1.4.1.18086.3080.17.152
The static IP address for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupStaticNetmask 1.3.6.1.4.1.18086.3080.17.153
The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupIpMulticastAddr 1.3.6.1.4.1.18086.3080.17.154
The IP Multicast address for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupIpMulticastSourceFilterMode 1.3.6.1.4.1.18086.3080.17.193
Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sfinclude(0), sfexclude(1)  

pt3080CommsBackupIpMulticastSourceFilterAddress1 1.3.6.1.4.1.18086.3080.17.170
The IP Multicast Source Filter address no 1 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupIpMulticastSourceFilterAddress2 1.3.6.1.4.1.18086.3080.17.171
The IP Multicast Source Filter address no 2 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupIpMulticastSourceFilterAddress3 1.3.6.1.4.1.18086.3080.17.172
The IP Multicast Source Filter address no 3 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupIpMulticastSourceFilterAddress4 1.3.6.1.4.1.18086.3080.17.173
The IP Multicast Source Filter address no 4 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupIpMulticastSourceFilterAddress5 1.3.6.1.4.1.18086.3080.17.174
The IP Multicast Source Filter address no 5 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupIpMulticastSourceFilterAddress6 1.3.6.1.4.1.18086.3080.17.175
The IP Multicast Source Filter address no 6 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupVlanEnable 1.3.6.1.4.1.18086.3080.17.155
Enable/Disable VLAN on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsBackupVlanId 1.3.6.1.4.1.18086.3080.17.156
VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4095  

pt3080CommsBackupServiceSNMP 1.3.6.1.4.1.18086.3080.17.157
Enable/Disable SNMP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsBackupServiceSCPI 1.3.6.1.4.1.18086.3080.17.158
Enable/Disable SCPI service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsBackupServiceTSoIP 1.3.6.1.4.1.18086.3080.17.159
Enable/Disable TSoIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsBackupServiceWeb 1.3.6.1.4.1.18086.3080.17.160
Enable/Disable Web (http) service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsBackupServiceRIP 1.3.6.1.4.1.18086.3080.17.161
Enable/Disable RIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsBackupCurrentIpAddr 1.3.6.1.4.1.18086.3080.17.162
The current IP address for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsBackupCurrentNetmask 1.3.6.1.4.1.18086.3080.17.163
The current IP netmask for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortEnable 1.3.6.1.4.1.18086.3080.17.2500
Enable/Disable this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsPortPhysicalInterface 1.3.6.1.4.1.18086.3080.17.2151
The Physical Ethernet Interface of this (virtual) interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eth0(0), eth1(1), eth2(2), eth3(3), eth4(4)  

pt3080CommsPortDhcpMode 1.3.6.1.4.1.18086.3080.17.2075
Enable/Disable DHCP client on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), client(1)  

pt3080CommsPortStaticIpAddr 1.3.6.1.4.1.18086.3080.17.2152
The static IP address for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortStaticNetmask 1.3.6.1.4.1.18086.3080.17.2153
The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortIpMulticastAddr 1.3.6.1.4.1.18086.3080.17.2154
The IP Multicast address for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortIpMulticastSourceFilterMode 1.3.6.1.4.1.18086.3080.17.2193
Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sfinclude(0), sfexclude(1)  

pt3080CommsPortIpMulticastSourceFilterAddress1 1.3.6.1.4.1.18086.3080.17.2170
The IP Multicast Source Filter address no 1 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortIpMulticastSourceFilterAddress2 1.3.6.1.4.1.18086.3080.17.2171
The IP Multicast Source Filter address no 2 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortIpMulticastSourceFilterAddress3 1.3.6.1.4.1.18086.3080.17.2172
The IP Multicast Source Filter address no 3 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortIpMulticastSourceFilterAddress4 1.3.6.1.4.1.18086.3080.17.2173
The IP Multicast Source Filter address no 4 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortIpMulticastSourceFilterAddress5 1.3.6.1.4.1.18086.3080.17.2174
The IP Multicast Source Filter address no 5 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortIpMulticastSourceFilterAddress6 1.3.6.1.4.1.18086.3080.17.2175
The IP Multicast Source Filter address no 6 for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortVlanEnable 1.3.6.1.4.1.18086.3080.17.2155
Enable/Disable VLAN on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsPortVlanId 1.3.6.1.4.1.18086.3080.17.2156
VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4095  

pt3080CommsPortServiceSNMP 1.3.6.1.4.1.18086.3080.17.2157
Enable/Disable SNMP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsPortServiceSCPI 1.3.6.1.4.1.18086.3080.17.2158
Enable/Disable SCPI service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsPortServiceTSoIP 1.3.6.1.4.1.18086.3080.17.2159
Enable/Disable TSoIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsPortServiceWeb 1.3.6.1.4.1.18086.3080.17.2160
Enable/Disable Web (http) service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsPortServiceRIP 1.3.6.1.4.1.18086.3080.17.2161
Enable/Disable RIP service on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080CommsPortCurrentIpAddr 1.3.6.1.4.1.18086.3080.17.2162
The current IP address for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsPortCurrentNetmask 1.3.6.1.4.1.18086.3080.17.2163
The current IP netmask for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsSNMPServicePort 1.3.6.1.4.1.18086.3080.17.55
The UDP port number used for SNMP Service.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080CommsSNMPReadOnlyCommunity 1.3.6.1.4.1.18086.3080.17.56
The Read-only community string used to access the SNMP Service.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsSNMPReadWriteCommunity 1.3.6.1.4.1.18086.3080.17.57
The Read-Write community string used to access the SNMP Service.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsSNMPTrapCommunity 1.3.6.1.4.1.18086.3080.17.58
The Trap community string used when sending SNMP Traps.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsSNMPTrapDestination 1.3.6.1.4.1.18086.3080.17.59
The destination IP address for the SNMP traps.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsSNMPTrapDestination2 1.3.6.1.4.1.18086.3080.17.419
The destination 2 IP address for the SNMP traps.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsSNMPTrapDestination3 1.3.6.1.4.1.18086.3080.17.779
The destination 3 IP address for the SNMP traps.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsSNMPTrapDestination4 1.3.6.1.4.1.18086.3080.17.1139
The destination 4 IP address for the SNMP traps.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsSNMPTrapDestination5 1.3.6.1.4.1.18086.3080.17.1499
The destination 5 IP address for the SNMP traps.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsSNMPTrapDestinationPort 1.3.6.1.4.1.18086.3080.17.60
The UDP port number used for Trap destination .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080CommsSNMPTrapDestinationPort2 1.3.6.1.4.1.18086.3080.17.420
The UDP port number used for Trap destination 2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080CommsSNMPTrapDestinationPort3 1.3.6.1.4.1.18086.3080.17.780
The UDP port number used for Trap destination 3.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080CommsSNMPTrapDestinationPort4 1.3.6.1.4.1.18086.3080.17.1140
The UDP port number used for Trap destination 4.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080CommsSNMPTrapDestinationPort5 1.3.6.1.4.1.18086.3080.17.1500
The UDP port number used for Trap destination 5.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080CommsStaticGateway 1.3.6.1.4.1.18086.3080.17.29
The static IP address for the default router (gateway). Will be used unless DHCP is enabled and the DHCP server is configured to include a default router address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsCurrentGateway 1.3.6.1.4.1.18086.3080.17.30
The Current IP address for the default router (gateway).
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsStaticHostname 1.3.6.1.4.1.18086.3080.17.27
The static hostname for the device. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsCurrentHostname 1.3.6.1.4.1.18086.3080.17.28
The static hostname for the device. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080CommsStaticDNSDomain 1.3.6.1.4.1.18086.3080.17.25
The static DNS domain name for the device. Will be used if DHCP is disabled or unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsCurrentDNSDomain 1.3.6.1.4.1.18086.3080.17.26
The current DNS domain name for the device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080CommsStaticDNS1ServerAddress 1.3.6.1.4.1.18086.3080.17.19
The IP address of DNS server 1.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsStaticDNS2ServerAddress 1.3.6.1.4.1.18086.3080.17.21
The IP address of DNS server 2.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsStaticDNS3ServerAddress 1.3.6.1.4.1.18086.3080.17.23
The IP address of DNS server 3.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsCurrentDNS1ServerAddress 1.3.6.1.4.1.18086.3080.17.20
The Current IP address of DNS server 1.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsCurrentDNS2ServerAddress 1.3.6.1.4.1.18086.3080.17.22
The Current IP address of DNS server 2.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsCurrentDNS3ServerAddress 1.3.6.1.4.1.18086.3080.17.24
The Current IP address of DNS server 3.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pt3080CommsStaticNtpServerAddress 1.3.6.1.4.1.18086.3080.17.31
The DNS name or IP address of the NTP server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsCurrentNtpServerAddress 1.3.6.1.4.1.18086.3080.17.32
The Current IP address of the NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080CommsEmailServerAddress 1.3.6.1.4.1.18086.3080.17.33
The IP address of the Email (SMTP) server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsWebServicePort 1.3.6.1.4.1.18086.3080.17.35
The TCP port number used for Web Service.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080CommsSCPIServicePort 1.3.6.1.4.1.18086.3080.17.36
The TCP port number used for SCPI Service.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080CommsSCPIServerBaudrate 1.3.6.1.4.1.18086.3080.17.37
The Baudrate used for SCPI Service on serial port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER r2400(0), r4800(1), r9600(2), r19200(3), r38400(4), r57600(5), r115200(6)  

pt3080CommsSCPIUartInterface 1.3.6.1.4.1.18086.3080.17.39
The Interface used for SCPI Service on serial port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rs232(0), rs485(1), rs485hd(2)  

pt3080CommsRipPort 1.3.6.1.4.1.18086.3080.17.38
The UDP port number used for RIP Service.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

pt3080CommsIGMPVersion 1.3.6.1.4.1.18086.3080.17.99
Select which IGMP Version to use.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), v1(1), v2(2), v3(3)  

pt3080CommsIGMPQueryRobustnessCount 1.3.6.1.4.1.18086.3080.17.97
The Number of Query Replies sent. The higher a number, the more robust IGMP setup is. At the cost of traffic on the network. Note: Changing this parameter doesnt take effect on a network interface until it has (re-)enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..16  

pt3080CommsIGMPv3UnsolicitedReportInterval 1.3.6.1.4.1.18086.3080.17.96
The time interval between unsolicited IGMPv3 reports being sent. See RFC3376. The number of such report being sent is controlled by the Query Robustness Count.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..60000  

pt3080CommsIGMPv2UnsolicitedReportInterval 1.3.6.1.4.1.18086.3080.17.95
The time interval between unsolicited IGMPv2/v1 reports being sent. See RFC2236. The number of such report being sent is controlled by the Query Robustness Count.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..60000  

pt3080CommsAccessAllowed 1.3.6.1.4.1.18086.3080.17.48
Current access mode allowed: Remote: SNMP via Ethernet, Local: Frontpanel
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER remote(0), local-disable-set(1)  

pt3080CommsAccessAllowedTimeout 1.3.6.1.4.1.18086.3080.17.49
Timeout (in minutes) before local mode reverts to remote mode.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1440  

pt3080CommsAccessAllowedTimeLeft 1.3.6.1.4.1.18086.3080.17.50
Current time left (in seconds) before local mode reverts to remote mode.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080CommsAccessPasswordObserver 1.3.6.1.4.1.18086.3080.17.51
The access password for Observer level access. Will always read as empty.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsAccessPasswordOperator 1.3.6.1.4.1.18086.3080.17.52
The access password for Operator level access. Will always read as empty.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsAccessPasswordAdministrator 1.3.6.1.4.1.18086.3080.17.53
The access password for Administrator level access. Will always read as empty.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pt3080CommsStaticRouteTable 1.3.6.1.4.1.18086.3080.17.300
This table contains the static routing table entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pt3080CommsStaticRouteEntry

pt3080CommsStaticRouteEntry 1.3.6.1.4.1.18086.3080.17.300.1
An entry for the static network routing table
Status: current Access: not-accessible
OBJECT-TYPE    
  Pt3080CommsStaticRouteEntry  

pt3080CommsStaticRouteNO 1.3.6.1.4.1.18086.3080.17.300.1.1
Unique ID for this static route entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16  

pt3080CommsStaticRouteType 1.3.6.1.4.1.18086.3080.17.300.1.2
Type of a Route table entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unused(0), normal(1), physicalif(2), recursive(3), drop(4)  

pt3080CommsStaticRoutePrefix 1.3.6.1.4.1.18086.3080.17.300.1.3
The IP address part of prefix for a route table entry. If the address is 0.0.0.0, the entry will not be used.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsStaticRoutePrefixSize 1.3.6.1.4.1.18086.3080.17.300.1.4
The number of bits in the network part of the prefix for route table entry $. If the number is 0 (zero), the entry will not be used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

pt3080CommsStaticRouteTarget 1.3.6.1.4.1.18086.3080.17.300.1.5
The target IP address for a route table entry. Only used if pt3080CommsStaticRouteType is normal(1) or recursive(3). If the target address is 0.0.0.0, the entry will not be used.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pt3080CommsStaticRoutePhysicalInterface 1.3.6.1.4.1.18086.3080.17.300.1.6
The Physical Ethernet Interface to use for a Route table entry. Only used when pt3080CommsStaticRouteType is physicalif(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eth0(0), eth1(1), eth2(2), eth3(3), eth4(4)  

pt3080DemodulatorFollowMode 1.3.6.1.4.1.18086.3080.24.1
Controls the Demodulators follow mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080Demodulator1Available 1.3.6.1.4.1.18086.3080.24.2
Status on the availability of Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

pt3080Demodulator2Available 1.3.6.1.4.1.18086.3080.24.29
Status on the availability of Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

pt3080Demodulator1FWVersion 1.3.6.1.4.1.18086.3080.24.3
Demodulator 1 firmware version string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080Demodulator2FWVersion 1.3.6.1.4.1.18086.3080.24.30
Demodulator 2 firmware version string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pt3080Demodulator1OutputTS 1.3.6.1.4.1.18086.3080.24.4
Controls which TS demodulator 1 shall output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hp(0), lp(1)  

pt3080Demodulator2OutputTS 1.3.6.1.4.1.18086.3080.24.31
Controls which TS demodulator 2 shall output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hp(0), lp(1)  

pt3080Demodulator1MerLimit 1.3.6.1.4.1.18086.3080.24.5
Lower limit for MER Level
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..240  

pt3080Demodulator2MerLimit 1.3.6.1.4.1.18086.3080.24.32
Lower limit for MER Level
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..240  

pt3080Demodulator1PreVirterbiErrorRateLimit 1.3.6.1.4.1.18086.3080.24.6
Upper limit for Pre-Virterbi Bit Error Rate
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000000  

pt3080Demodulator2PreVirterbiErrorRateLimit 1.3.6.1.4.1.18086.3080.24.33
Upper limit for Pre-Virterbi Bit Error Rate
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000000  

pt3080Demodulator1PostVirterbiErrorRateLimit 1.3.6.1.4.1.18086.3080.24.7
Upper limit for Post-Virterbi Bit Error Rate
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000000  

pt3080Demodulator2PostVirterbiErrorRateLimit 1.3.6.1.4.1.18086.3080.24.34
Upper limit for Post-Virterbi Bit Error Rate
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000000  

pt3080Demodulator1FelStatus 1.3.6.1.4.1.18086.3080.24.8
Received signal locked status on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1)  

pt3080Demodulator2FelStatus 1.3.6.1.4.1.18086.3080.24.35
Received signal locked status on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1)  

pt3080Demodulator1UncorrectedPackets 1.3.6.1.4.1.18086.3080.24.9
Number of uncorrected packets received in Demodulator 1 since boot or since counter was last cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator2UncorrectedPackets 1.3.6.1.4.1.18086.3080.24.36
Number of uncorrected packets received in Demodulator 2 since boot or since counter was last cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator1Mer 1.3.6.1.4.1.18086.3080.24.11
Current MER level for Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator2Mer 1.3.6.1.4.1.18086.3080.24.38
Current MER level for Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator1PreVirterbiErrorRate 1.3.6.1.4.1.18086.3080.24.12
Current Pre-Virterbi Bit Error Rate for Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator2PreVirterbiErrorRate 1.3.6.1.4.1.18086.3080.24.39
Current Pre-Virterbi Bit Error Rate for Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator1PostVirterbiErrorRate 1.3.6.1.4.1.18086.3080.24.13
Current Post-Virterbi Bit Error Rate for Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator2PostVirterbiErrorRate 1.3.6.1.4.1.18086.3080.24.40
Current Post-Virterbi Bit Error Rate for Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator1ActualGuardInterval 1.3.6.1.4.1.18086.3080.24.14
Guard Interval for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER g1-32(0), g1-16(1), g1-8(2), g1-4(3)  

pt3080Demodulator2ActualGuardInterval 1.3.6.1.4.1.18086.3080.24.41
Guard Interval for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER g1-32(0), g1-16(1), g1-8(2), g1-4(3)  

pt3080Demodulator1Actualifft 1.3.6.1.4.1.18086.3080.24.15
IFFT for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER f2k(0), f4k(1), f8k(2)  

pt3080Demodulator2Actualifft 1.3.6.1.4.1.18086.3080.24.42
IFFT for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER f2k(0), f4k(1), f8k(2)  

pt3080Demodulator1ActualConstellation 1.3.6.1.4.1.18086.3080.24.16
Constellation for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER qpsk(0), qam16(1), qam64(2)  

pt3080Demodulator2ActualConstellation 1.3.6.1.4.1.18086.3080.24.43
Constellation for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER qpsk(0), qam16(1), qam64(2)  

pt3080Demodulator1ActualHierarchy 1.3.6.1.4.1.18086.3080.24.17
Hierarchy for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), h-1(1), h-2(2), h-4(3)  

pt3080Demodulator2ActualHierarchy 1.3.6.1.4.1.18086.3080.24.44
Hierarchy for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), h-1(1), h-2(2), h-4(3)  

pt3080Demodulator1ActualCodeRateHighPrio 1.3.6.1.4.1.18086.3080.24.18
High Priority Code Rate for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER r1-2(0), r2-3(1), r3-4(2), r5-6(3), r7-8(4)  

pt3080Demodulator2ActualCodeRateHighPrio 1.3.6.1.4.1.18086.3080.24.45
High Priority Code Rate for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER r1-2(0), r2-3(1), r3-4(2), r5-6(3), r7-8(4)  

pt3080Demodulator1ActualCodeRateLowPrio 1.3.6.1.4.1.18086.3080.24.19
High Priority Code Rate for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER r1-2(0), r2-3(1), r3-4(2), r5-6(3), r7-8(4)  

pt3080Demodulator2ActualCodeRateLowPrio 1.3.6.1.4.1.18086.3080.24.46
High Priority Code Rate for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER r1-2(0), r2-3(1), r3-4(2), r5-6(3), r7-8(4)  

pt3080Demodulator1ActualDeepInterleaver 1.3.6.1.4.1.18086.3080.24.20
Deep Interleaver for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator2ActualDeepInterleaver 1.3.6.1.4.1.18086.3080.24.47
Deep Interleaver for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator1ActualMpeFecHighPrio 1.3.6.1.4.1.18086.3080.24.21
High Priority MPE/FEC mode for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator2ActualMpeFecHighPrio 1.3.6.1.4.1.18086.3080.24.48
High Priority MPE/FEC mode for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator1ActualMpeFecLowPrio 1.3.6.1.4.1.18086.3080.24.22
Low Priority MPE/FEC mode for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator2ActualMpeFecLowPrio 1.3.6.1.4.1.18086.3080.24.49
Low Priority MPE/FEC mode for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator1ActualTimeSlicingHighPrio 1.3.6.1.4.1.18086.3080.24.23
High Priority timeslicing mode for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator2ActualTimeSlicingHighPrio 1.3.6.1.4.1.18086.3080.24.50
High Priority timeslicing mode for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator1ActualTimeSlicingLowPrio 1.3.6.1.4.1.18086.3080.24.24
Low Priority timeslicing mode for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator2ActualTimeSlicingLowPrio 1.3.6.1.4.1.18086.3080.24.51
Low Priority timeslicing mode for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator1ActualCellID 1.3.6.1.4.1.18086.3080.24.25
Current Cell ID value for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator2ActualCellID 1.3.6.1.4.1.18086.3080.24.52
Current Cell ID value for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080Demodulator1ActualDVBHMode 1.3.6.1.4.1.18086.3080.24.26
DVB-H mode for the received signal on Demodulator 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080Demodulator2ActualDVBHMode 1.3.6.1.4.1.18086.3080.24.53
DVB-H mode for the received signal on Demodulator 2
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080PrecorrectorLinearAdaptive 1.3.6.1.4.1.18086.3080.25.79
Linear precorrection curve active in the system
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearMode 1.3.6.1.4.1.18086.3080.25.2
selection of the operational mode for the linear precorrector
(note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI )
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monitoring(0), static(1), adaptive(2)  

pt3080PrecorrectorLinearSenseEnable 1.3.6.1.4.1.18086.3080.25.46
By using this, it is possible to control wether to use the linear Sense Input or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080PrecorrectorLinearMonitorStatus 1.3.6.1.4.1.18086.3080.25.24
linear Precor state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-running(0), monitoring(1), initialising(2), initialising-0(3), initialising-10(4), initialising-20(5), initialising-30(6), initialising-40(7), initialising-50(8), initialising-60(9), initialising-70(10), initialising-80(11), initialising-90(12), auto-applying(13), completed(14)  

pt3080PrecorrectorLinearMonitorSenseLevel 1.3.6.1.4.1.18086.3080.25.22
Level meassured at the linear sense input with offset defined by attenuation
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearMonitorSenseValid 1.3.6.1.4.1.18086.3080.25.23
Is linear sense input information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearMonitorSenseBadCount 1.3.6.1.4.1.18086.3080.25.8
Number of bad/invalid sense counts, made by the linear adaptive precorrector.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearMonitorAmplitudeRipple 1.3.6.1.4.1.18086.3080.25.26
Amplitude ripple
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearMonitorAmplitudeRippleValid 1.3.6.1.4.1.18086.3080.25.30
Is amplitude ripple information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearMonitorGroupDelay 1.3.6.1.4.1.18086.3080.25.27
Group delay
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearMonitorGroupDelayValid 1.3.6.1.4.1.18086.3080.25.31
Is group delay information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearMonitorDiscartedIterations 1.3.6.1.4.1.18086.3080.25.47
Number of iterations discarded by the linear adaptive precorrector due to noisy signal samples.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearMonitorIterations 1.3.6.1.4.1.18086.3080.25.19
Number of iterations made by the linear adaptive precorrector.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinearAdaptiveMode 1.3.6.1.4.1.18086.3080.25.1
selection of the operational mode for the linear adaptive precorrector
(note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI )
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), autorun(1), runtotarget(2), continuous(3), single(4)  

pt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetLevel 1.3.6.1.4.1.18086.3080.25.42
Define a adaptive target level for the amplitude ripple
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10000  

pt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetHysteresis 1.3.6.1.4.1.18086.3080.25.14
Define a adaptive target level hysteresis for the amplitude ripple
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100000  

pt3080PrecorrectorLinearAdaptiveAmplitudeRippleEnable 1.3.6.1.4.1.18086.3080.25.10
Enable amplitude ripple as a trigger for the AUTORUN and RUNTOTARGET modes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080PrecorrectorLinearAdaptiveGroupDelayTargetLevel 1.3.6.1.4.1.18086.3080.25.43
Define a adaptive target level for the group delay
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10000  

pt3080PrecorrectorLinearAdaptiveGroupDelayTargetHysteresis 1.3.6.1.4.1.18086.3080.25.15
Define a adaptive target level hysteresis for the group delay
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100000  

pt3080PrecorrectorLinearAdaptiveGroupDelayEnable 1.3.6.1.4.1.18086.3080.25.11
Enable group delay as a trigger for the AUTORUN and RUNTOTARGET modes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080PrecorrectorLinearAttenuation 1.3.6.1.4.1.18086.3080.25.78
Define a attenuation level for the sense input
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1000..1000  

pt3080PrecorrectorNonlinearAdaptive 1.3.6.1.4.1.18086.3080.25.80
Non-Linear precorrection curve active in the system
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMode 1.3.6.1.4.1.18086.3080.25.4
selection of the operational mode for the non-linear precorrector
(note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI )
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monitoring(0), static(1), adaptive(2)  

pt3080PrecorrectorNonlinearSenseEnable 1.3.6.1.4.1.18086.3080.25.48
By using this, it is possible to control wether to use the nonlinear Sense Input or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080PrecorrectorNonlinearMonitorStatus 1.3.6.1.4.1.18086.3080.25.40
Nonlinear Precor state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-running(0), monitoring(1), initialising(2), initialising-0(3), initialising-10(4), initialising-20(5), initialising-30(6), initialising-40(7), initialising-50(8), initialising-60(9), initialising-70(10), initialising-80(11), initialising-90(12), auto-applying(13), completed(14)  

pt3080PrecorrectorNonlinearMonitorSenseLevel 1.3.6.1.4.1.18086.3080.25.38
Level meassured at the Nonlinear sense input with offset defined by attenuation
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorSenseValid 1.3.6.1.4.1.18086.3080.25.39
Is Nonlinear sense input information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorSenseBadCount 1.3.6.1.4.1.18086.3080.25.9
Number of bad/invalid sense counts, made by the nonlinear adaptive precorrector.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorLowerShoulderLevel 1.3.6.1.4.1.18086.3080.25.28
Lower shoulder level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorLowerShoulderValid 1.3.6.1.4.1.18086.3080.25.32
Is Lower shoulder information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorUpperShoulderLevel 1.3.6.1.4.1.18086.3080.25.29
Upper shoulder level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorUpperShoulderValid 1.3.6.1.4.1.18086.3080.25.33
Is Upper shoulder information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorDiscartedIterations 1.3.6.1.4.1.18086.3080.25.49
Number of iterations discarded by the non-linear adaptive precorrector dur to noisy signal samples.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorIterations 1.3.6.1.4.1.18086.3080.25.35
Number of iterations made by the nonlinear adaptive precorrector.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorMer 1.3.6.1.4.1.18086.3080.25.50
MER
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorMerValid 1.3.6.1.4.1.18086.3080.25.51
Is MER information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorPapr 1.3.6.1.4.1.18086.3080.25.52
PAPR level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearMonitorPaprValid 1.3.6.1.4.1.18086.3080.25.53
Is Papr information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNonlinearAttenuation 1.3.6.1.4.1.18086.3080.25.77
Define a attenuation level for the sense input
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1000..1000  

pt3080PrecorrectorNonlinearAdaptiveMode 1.3.6.1.4.1.18086.3080.25.3
selection of the operational mode for the non-linear adaptive precorrector
(note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI )
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), autorun(1), runtotarget(2), continuous(3), single(4)  

pt3080PrecorrectorNonlinearAdaptiveAveraging 1.3.6.1.4.1.18086.3080.25.54
Choose wether or not to use averaging calulations
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

pt3080PrecorrectorNonlinearAdaptiveMaxRfPaprEnable 1.3.6.1.4.1.18086.3080.25.55
Enable the modulator's output PAPR limiter function
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pt3080PrecorrectorNonlinearAdaptiveMaxRfPaprLimit 1.3.6.1.4.1.18086.3080.25.56
Maximum RF PAPR Limitation
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 20..180  

pt3080PrecorrectorNonlinearAdaptiveMerTarget 1.3.6.1.4.1.18086.3080.25.57
Define a target level for the MER
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..800  

pt3080PrecorrectorNonlinearAdaptiveMerTargetHysteresis 1.3.6.1.4.1.18086.3080.25.58
Define a target MER hysteresis
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

pt3080PrecorrectorNonlinearAdaptiveMerEnable 1.3.6.1.4.1.18086.3080.25.59
Enable MER as a trigger for the AUTORUN and RUNTOTARGET modes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetLevel 1.3.6.1.4.1.18086.3080.25.44
Define a adaptive target level for the lower shoulder
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -800..0  

pt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetHysteresis 1.3.6.1.4.1.18086.3080.25.16
Define a adaptive target level hysteresis for the lower shoulder
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

pt3080PrecorrectorNonlinearAdaptiveLowerShoulderEnable 1.3.6.1.4.1.18086.3080.25.12
Enable shoulder level (lower) as a trigger for the AUTORUN and RUNTOTARGET modes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetLevel 1.3.6.1.4.1.18086.3080.25.45
Define a adaptive target level for the upper shoulder
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -800..0  

pt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetHysteresis 1.3.6.1.4.1.18086.3080.25.17
Define a adaptive target level hysteresis for the upper shoulder
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

pt3080PrecorrectorNonlinearAdaptiveUpperShoulderEnable 1.3.6.1.4.1.18086.3080.25.13
Enable shoulder level (upper) as a trigger for the AUTORUN and RUNTOTARGET modes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080PrecorrectorPaprClipping 1.3.6.1.4.1.18086.3080.25.60
set the built-in peak clipper function. The value 'max' corresponds to an unclipped COFDM signal (12dB peak to average ratio). The value 'min' correspondsto COFDM signal where all peaks >2dB above average power are clipped. When feeding the output from the modulator through an amplifier the best overall performance result is normally obtained if the clipper value used by modulator clips the signal just a fraction before the amplifier would clip the signal.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 200..1200  

pt3080PrecorrectorPaprShaping 1.3.6.1.4.1.18086.3080.25.61
Set the output peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

pt3080PrecorrectorClipperMode 1.3.6.1.4.1.18086.3080.25.74
Selection between no, static (manual) and adaptive clipper function
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monitoring(0), static(1), adaptive(2)  

pt3080PrecorrectorClipperAdaptive 1.3.6.1.4.1.18086.3080.25.75
Clipper shaped by the OptiClipper algorithm
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorClipperEnable 1.3.6.1.4.1.18086.3080.25.76
Clipper enable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

pt3080PrecorrectorClipperAdaptiveMode 1.3.6.1.4.1.18086.3080.25.63
Selection of the operational mode for the adaptive clipper function
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monitoring(0), continuous(1), single(2)  

pt3080PrecorrectorClipperAdaptiveShaping 1.3.6.1.4.1.18086.3080.25.81
Depricated Therefore min and max value are set to 100% Set the peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 99..100  

pt3080PrecorrectorClipperMonitorStatus 1.3.6.1.4.1.18086.3080.25.64
OptiClipper state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-running(0), monitoring(1), initialising(2), initialising-0(3), initialising-10(4), initialising-20(5), initialising-30(6), initialising-40(7), initialising-50(8), initialising-60(9), initialising-70(10), initialising-80(11), initialising-90(12), auto-applying(13), completed(14)  

pt3080PrecorrectorClipperMonitorShoulderLevelLower 1.3.6.1.4.1.18086.3080.25.65
Lower shoulder level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorClipperMonitorShoulderLevelLowerValid 1.3.6.1.4.1.18086.3080.25.66
Is Lower shoulder information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorClipperMonitorShoulderLevelUpper 1.3.6.1.4.1.18086.3080.25.67
Upper shoulder level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorClipperMonitorShoulderLevelUpperValid 1.3.6.1.4.1.18086.3080.25.68
Is Upper shoulder information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorClipperMonitorMer 1.3.6.1.4.1.18086.3080.25.69
MER level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorClipperMonitorMerValid 1.3.6.1.4.1.18086.3080.25.70
Is MER information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorClipperMonitorPapr 1.3.6.1.4.1.18086.3080.25.71
PAPR level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorClipperMonitorPaprValid 1.3.6.1.4.1.18086.3080.25.72
Is Papr information valid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorClipperMonitorIterations 1.3.6.1.4.1.18086.3080.25.73
Number of Iterations performed by the OptiClipper algorithm
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLastTurnAroundTime 1.3.6.1.4.1.18086.3080.25.6
PrecorrectorLastTurnAroundTime
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorSecondsSinceLastUpdate 1.3.6.1.4.1.18086.3080.25.7
PrecorrectorSecondsSinceLastUpdate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorLinCleanrun 1.3.6.1.4.1.18086.3080.25.18
PrecorrectorLinCleanrun
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pt3080PrecorrectorNlinCleanrun 1.3.6.1.4.1.18086.3080.25.34
PrecorrectorNlinCleanrun
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

pt3080PrecorrectorLinearLoadNeutral 1.3.6.1.4.1.18086.3080.25.20
PrecorrectorLinearLoadNeutral
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), load(1)  

pt3080PrecorrectorLinearLoadFactory 1.3.6.1.4.1.18086.3080.25.21
PrecorrectorLinearLoadFactory
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), load(1)  

pt3080PrecorrectorLinearUpdateFactoryCurve 1.3.6.1.4.1.18086.3080.25.25
PrecorrectorLinearUpdateFactoryCurve
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), update(1)  

pt3080PrecorrectorNonlinearLoadNeutral 1.3.6.1.4.1.18086.3080.25.36
PrecorrectorNonlinearLoadNeutral
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), load(1)  

pt3080PrecorrectorNonlinearLoadFactory 1.3.6.1.4.1.18086.3080.25.37
PrecorrectorNonlinearLoadFactory
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), load(1)  

pt3080PrecorrectorNonlinearUpdateFactoryCurve 1.3.6.1.4.1.18086.3080.25.41
PrecorrectorNonlinearUpdateFactoryCurve
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(0), update(1)  

pt3080BackplanePolarityHardMute 1.3.6.1.4.1.18086.3080.27.1
Set the polarity of the Hard Mute input pin on the PTT2 backplane.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER activelow(0), activehigh(1)  

pt3080BackplanePolarityRFFail 1.3.6.1.4.1.18086.3080.27.2
Set the polarity of the RF Fail output pin on the PTT2 backplane.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER activelow(0), activehigh(1)  

pt3080Notif 1.3.6.1.4.1.18086.3080.64.0
OBJECT IDENTIFIER    

pt3080NotifMessage 1.3.6.1.4.1.18086.3080.64.1
The current alarm notification message
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

pt3080NotifState 1.3.6.1.4.1.18086.3080.64.2
The current alarm notification state
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER off(0), activated(1)  

pt3080NotifLocalTime 1.3.6.1.4.1.18086.3080.64.3
The time the current alarm notification state changed
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DateAndTime  

pt3080Compliance 1.3.6.1.4.1.18086.3080.100.1.1
The compliance statement for systems supporting the this MIB.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

pt3080Groups 1.3.6.1.4.1.18086.3080.100.2
OBJECT IDENTIFIER    

pt3080SystemGroup 1.3.6.1.4.1.18086.3080.100.2.1
System group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080ModeGroup 1.3.6.1.4.1.18086.3080.100.2.2
DVB-T Mode group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080InputGroup 1.3.6.1.4.1.18086.3080.100.2.3
Input group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080OutputGroup 1.3.6.1.4.1.18086.3080.100.2.4
Output group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080GpsGroup 1.3.6.1.4.1.18086.3080.100.2.7
GPS group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080ChannelFilterGroup 1.3.6.1.4.1.18086.3080.100.2.8
Channel Filter group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080TSoIPGroup 1.3.6.1.4.1.18086.3080.100.2.10
TSoIP group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080MonitorGroup 1.3.6.1.4.1.18086.3080.100.2.12
Signal monitor group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080TestGroup 1.3.6.1.4.1.18086.3080.100.2.13
Test Signal group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080AlarmGroup 1.3.6.1.4.1.18086.3080.100.2.14
Alarm group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080PresetGroup 1.3.6.1.4.1.18086.3080.100.2.15
Preset group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080EventlogGroup 1.3.6.1.4.1.18086.3080.100.2.16
Eventlog group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080CommsGroup 1.3.6.1.4.1.18086.3080.100.2.17
Data network communications group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080DemodulatorGroup 1.3.6.1.4.1.18086.3080.100.2.24
Demodulator group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080PrecorrectorGroup 1.3.6.1.4.1.18086.3080.100.2.25
Precorrector group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080ReceptionGroup 1.3.6.1.4.1.18086.3080.100.2.26
Reception group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080BackplaneGroup 1.3.6.1.4.1.18086.3080.100.2.27
Backplane group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080ASIGroup 1.3.6.1.4.1.18086.3080.100.2.30
ASI media group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080NotifsGroup 1.3.6.1.4.1.18086.3080.100.2.64
Notification objects group
Status: current Access: accessible-for-notify
OBJECT-GROUP    

pt3080Agent 1.3.6.1.4.1.18086.3080.100.3
PT2080 DVB-T/H Modulator agent
Status: current Access: accessible-for-notify
AGENT-CAPABILITIES    

pt3080NotificationsGroups 1.3.6.1.4.1.18086.3080.100.4
OBJECT IDENTIFIER    

pt3080NotifModulatorAlarm 1.3.6.1.4.1.18086.3080.64.0.3
Modulator Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryAlarm 1.3.6.1.4.1.18086.3080.64.0.5
ASI TS Primary Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryAlarm 1.3.6.1.4.1.18086.3080.64.0.6
ASI TS Secondary Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNAlarm 1.3.6.1.4.1.18086.3080.64.0.7
SFN Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRefenceClockAlarm 1.3.6.1.4.1.18086.3080.64.0.8
Reference Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRFAlarm 1.3.6.1.4.1.18086.3080.64.0.9
RF Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifGNSSAlarm 1.3.6.1.4.1.18086.3080.64.0.10
GNSS Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSoIPAlarm 1.3.6.1.4.1.18086.3080.64.0.12
TSoIP Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifExternalAlarm 1.3.6.1.4.1.18086.3080.64.0.13
External Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifHWMonitorAlarm 1.3.6.1.4.1.18086.3080.64.0.14
HW Monitor Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifCommAlarm 1.3.6.1.4.1.18086.3080.64.0.15
Communications Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifASIAlarm 1.3.6.1.4.1.18086.3080.64.0.16
ASI Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalAlarm 1.3.6.1.4.1.18086.3080.64.0.18
Internal Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimarySyncLossAlarm 1.3.6.1.4.1.18086.3080.64.0.21
TS Primary Sync Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimarySyncErrorAlarm 1.3.6.1.4.1.18086.3080.64.0.22
TS Primary Sync Error
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryPCRErrorAlarm 1.3.6.1.4.1.18086.3080.64.0.23
TS Primary PCR Error
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryPATLossAlarm 1.3.6.1.4.1.18086.3080.64.0.24
TS Primary PAT Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryTSIDWrongAlarm 1.3.6.1.4.1.18086.3080.64.0.25
TS Primary Transport Stream ID
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryNWIDWrongAlarm 1.3.6.1.4.1.18086.3080.64.0.26
TS Primary Network ID
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryStuffingRateExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.27
TS Primary Stuffing Rate
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryBufferPoolExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.28
TS Primary Buffer Pool
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimarySTSJitterExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.29
TS Primary STS Jitter
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryMIPDataMissingAlarm 1.3.6.1.4.1.18086.3080.64.0.30
TS Primary MIP Data Missing
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryMIPPriorityBadAlarm 1.3.6.1.4.1.18086.3080.64.0.31
TS Primary Bad Priority in MIP
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondarySyncLossAlarm 1.3.6.1.4.1.18086.3080.64.0.32
TS Secondary Sync Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondarySyncErrorAlarm 1.3.6.1.4.1.18086.3080.64.0.33
TS Secondary Sync Error
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryPCRErrorAlarm 1.3.6.1.4.1.18086.3080.64.0.34
TS Secondary PCR Error
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryPATLossAlarm 1.3.6.1.4.1.18086.3080.64.0.35
TS Secondary PAT Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryTSIDWrongAlarm 1.3.6.1.4.1.18086.3080.64.0.36
TS Secondary Transport Stream ID
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryNWIDWrongAlarm 1.3.6.1.4.1.18086.3080.64.0.37
TS Secondary Network ID
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryStuffingRateExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.38
TS Secondary Stuffing Rate
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryBufferPoolExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.39
TS Secondary Buffer Pool
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondarySTSJitterExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.40
TS Secondary STS Jitter
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryMIPDataMissingAlarm 1.3.6.1.4.1.18086.3080.64.0.41
TS Secondary MIP Data Missing
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryMIPPriorityBadAlarm 1.3.6.1.4.1.18086.3080.64.0.42
TS Secondary Bad Priority in MIP
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRFOverloadProtectionAlarm 1.3.6.1.4.1.18086.3080.64.0.44
Overload Protection
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifCommeth0Alarm 1.3.6.1.4.1.18086.3080.64.0.55
ETH0 Conn. State
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifCommeth1Alarm 1.3.6.1.4.1.18086.3080.64.0.56
ETH1 Conn. State
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifCommeth2Alarm 1.3.6.1.4.1.18086.3080.64.0.57
ETH2 Conn. State
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifCommeth3Alarm 1.3.6.1.4.1.18086.3080.64.0.58
ETH3 Conn. State
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifCommeth4Alarm 1.3.6.1.4.1.18086.3080.64.0.59
ETH4 Conn. State
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifExternalInput1Alarm 1.3.6.1.4.1.18086.3080.64.0.72
Alarm Input 1
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifExternalInput2Alarm 1.3.6.1.4.1.18086.3080.64.0.73
Alarm Input 2
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifExternalInput3Alarm 1.3.6.1.4.1.18086.3080.64.0.74
Alarm Input 3
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifExternalInput4Alarm 1.3.6.1.4.1.18086.3080.64.0.75
Alarm Input 4
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRefenceClockExtern1PPSLossAlarm 1.3.6.1.4.1.18086.3080.64.0.76
Ext. 1PPS Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRefenceClockIntern1PPSLossAlarm 1.3.6.1.4.1.18086.3080.64.0.77
Int. 10MHz Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRefenceClockExtern10MHzLossAlarm 1.3.6.1.4.1.18086.3080.64.0.78
Ext. 10MHz Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRFAlcRangeAlarm 1.3.6.1.4.1.18086.3080.64.0.79
ALC Range
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNResyncAlarm 1.3.6.1.4.1.18086.3080.64.0.80
SFN Resync Error
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNTSPrimaryMaxDelayOffsetExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.81
Primary SFN Max Delay + Offset OOR
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNTSPrimaryNetworkDelayExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.82
Primary SFN NW Delay Greater Than Max
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNTSSecondaryMaxDelayOffsetExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.84
Secondary SFN Max. Delay + Offset OOR
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNTSSecondaryNetworkDelayExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.85
Secondary SFN NW Delay Greater Than Max
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRFLevelOutOfRangeAlarm 1.3.6.1.4.1.18086.3080.64.0.87
RF Level Out of Range
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRefenceClockNTPSyncLossAlarm 1.3.6.1.4.1.18086.3080.64.0.89
NTP Sync Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNTSPrimarySeamlessDelayTooSmallAlarm 1.3.6.1.4.1.18086.3080.64.0.92
Primary Delay Margin too Small for Seamless and Holdover
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNTSPrimaryMIPConfigErrorAlarm 1.3.6.1.4.1.18086.3080.64.0.93
Primary SFN and MIP Config Differ
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNTSSecondarySeamlessDelayTooSmallAlarm 1.3.6.1.4.1.18086.3080.64.0.94
Secondary Delay Margin too Small for Seamless and Holdover
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNTSSecondaryMIPConfigErrorAlarm 1.3.6.1.4.1.18086.3080.64.0.95
Secondary SFN and MIP Config Differ
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifGNSSUnlockedAlarm 1.3.6.1.4.1.18086.3080.64.0.98
GNSS Unlocked
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifGNSSAntennaFaultAlarm 1.3.6.1.4.1.18086.3080.64.0.107
GNSS Antenna Fault
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifGNSSHoldOverAlarm 1.3.6.1.4.1.18086.3080.64.0.108
GNSS Holdover
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRefenceClockExternal10MHzHoldOverAlarm 1.3.6.1.4.1.18086.3080.64.0.109
Ext. 10MHz Ref Holdover
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifRefenceClockExternal1PPSHoldOverAlarm 1.3.6.1.4.1.18086.3080.64.0.110
Ext. 1PPS Ref Holdover
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifASIASI1ErrorRateEceeededAlarm 1.3.6.1.4.1.18086.3080.64.0.113
ASI-IN1 Error Rate
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifASIASI2ErrorRateEceeededAlarm 1.3.6.1.4.1.18086.3080.64.0.114
ASI-IN2 Error Rate
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSoIPRx1PackageErrorRationExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.115
TSoIP RX1 Package Error Ratio Exceeded
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSoIPRx2PackageErrorRationExceededAlarm 1.3.6.1.4.1.18086.3080.64.0.117
TSoIP RX2 Package Error Ratio Exceeded
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSoIPRx1SyncLossAlarm 1.3.6.1.4.1.18086.3080.64.0.119
TSoIP RX1 Signal Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSoIPRx2SyncLossAlarm 1.3.6.1.4.1.18086.3080.64.0.121
TSoIP RX2 Signal Loss
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalBackplaneAlarm 1.3.6.1.4.1.18086.3080.64.0.129
Backplane Status
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalReferenceClockAlarm 1.3.6.1.4.1.18086.3080.64.0.132
Reference Status
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalUpConverterAlarm 1.3.6.1.4.1.18086.3080.64.0.134
Upconverter Status
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalDownConverterAlarm 1.3.6.1.4.1.18086.3080.64.0.135
Downconverter Status
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalMainboardAlarm 1.3.6.1.4.1.18086.3080.64.0.136
Main board Status
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalBatteryAlarm 1.3.6.1.4.1.18086.3080.64.0.137
Main Board Battery
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalFirmware1Alarm 1.3.6.1.4.1.18086.3080.64.0.139
Firmware 1 Status
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalGNSSAlarm 1.3.6.1.4.1.18086.3080.64.0.142
GNSS Status
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalSatelliteAlarm 1.3.6.1.4.1.18086.3080.64.0.143
Satrecv Status
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalEthAlarm 1.3.6.1.4.1.18086.3080.64.0.146
EtherNet Port Failure
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifHWMonitorFPGAAlarm 1.3.6.1.4.1.18086.3080.64.0.156
Main Board FPGA Temperature
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifHWMonitorMainBoardCPUTemperatureAlarm 1.3.6.1.4.1.18086.3080.64.0.157
Main Board CPU Temperature
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifHWMonitorMainBoardTemperatureAlarm 1.3.6.1.4.1.18086.3080.64.0.158
Main Board Temperature
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifHWMonitorLeftFanAlarm 1.3.6.1.4.1.18086.3080.64.0.159
Left Chassis Fan
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifHWMonitorRightFan2Alarm 1.3.6.1.4.1.18086.3080.64.0.160
Right Chassis Fan
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifHWMonitorBackplaneTemperatureAlarm 1.3.6.1.4.1.18086.3080.64.0.162
Backplane Temperature
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryInputTSHoldOverAlarm 1.3.6.1.4.1.18086.3080.64.0.180
Input TS Holdover
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifInternalPLLUnlockedAlarm 1.3.6.1.4.1.18086.3080.64.0.182
PLL Out of Lock
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifExternalInput5Alarm 1.3.6.1.4.1.18086.3080.64.0.183
Alarm Input 5
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNUntimedModeAlarm 1.3.6.1.4.1.18086.3080.64.0.184
SFN Mode Untimed
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifSFNFreeRunningModeAlarm 1.3.6.1.4.1.18086.3080.64.0.185
SFN Mode Free Running
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifExternalInput6Alarm 1.3.6.1.4.1.18086.3080.64.0.186
Alarm Input 6
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifExternalInput7Alarm 1.3.6.1.4.1.18086.3080.64.0.187
Alarm Input 7
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifExternalInput8Alarm 1.3.6.1.4.1.18086.3080.64.0.188
Alarm Input 8
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSPrimaryDelayMarginAlarm 1.3.6.1.4.1.18086.3080.64.0.190
TS Primary Delay Margin
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifTSSecondaryDelayMarginAlarm 1.3.6.1.4.1.18086.3080.64.0.191
TS Secondary Delay Margin
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

pt3080NotifGroupModulatorAlarm 1.3.6.1.4.1.18086.3080.100.4.3
Modulator Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupTSPrimaryAlarm 1.3.6.1.4.1.18086.3080.100.4.5
ASI TS Primary Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupTSSecondaryAlarm 1.3.6.1.4.1.18086.3080.100.4.6
ASI TS Secondary Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupSFNAlarm 1.3.6.1.4.1.18086.3080.100.4.7
SFN Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupRefenceClockAlarm 1.3.6.1.4.1.18086.3080.100.4.8
Reference Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupRFAlarm 1.3.6.1.4.1.18086.3080.100.4.9
RF Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupGNSSAlarm 1.3.6.1.4.1.18086.3080.100.4.10
GNSS Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupTSoIPAlarm 1.3.6.1.4.1.18086.3080.100.4.12
TSoIP Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupExternalAlarm 1.3.6.1.4.1.18086.3080.100.4.13
External Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupHWMonitorAlarm 1.3.6.1.4.1.18086.3080.100.4.14
HW Monitor Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupCommAlarm 1.3.6.1.4.1.18086.3080.100.4.15
Communications Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupASIAlarm 1.3.6.1.4.1.18086.3080.100.4.16
ASI Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

pt3080NotifGroupInternalAlarm 1.3.6.1.4.1.18086.3080.100.4.18
Internal Alarms
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor