PRVT-EPS-MIB

File: PRVT-EPS-MIB.mib (19025 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
PRVT-SWITCH-MIB	IEEE8021-CFM-MIB	PRVT-SERV-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Unsigned32	TEXTUAL-CONVENTION	RowStatus
TruthValue	MODULE-COMPLIANCE	OBJECT-GROUP
NOTIFICATION-GROUP	switch	Dot1agCfmMepIdOrZero
Dot1agCfmMDLevelOrNone	sdpInfoEntry

Defined Types

PrvtEpsRequestStateType
Tok_String
TEXTUAL-CONVENTION
	INTEGER	rsNone(-1), rsNoRequest(0), rsDoNotRevert(1), rsReverseRequest(2), rsExercise(4), rsWaitToRestore(5), rsClear(6), rsManualSwitch(7), rsSignalDegrade(9), rsSignalFail(11), rsForcedSwitch(13), rsSignalFailForProtection(14), rsLockoutOfProtection(15)

PrvtEpsProtectionType
Tok_String
TEXTUAL-CONVENTION
	INTEGER	pt1Plus1(0), pt1To1(1)

PrvtEpsDirectionType
Tok_String
TEXTUAL-CONVENTION
	INTEGER	dtUnidirectional(0), dtBidirectional(1)

PrvtEpsActivePathType
Tok_String
TEXTUAL-CONVENTION
	INTEGER	working(0), protection(1)

PrvtEpsMonitoringType
Tok_String
TEXTUAL-CONVENTION
	INTEGER	none(0), cfmPM(1), saa(2)

PrvtEpsDefectFopType
Tok_String
TEXTUAL-CONVENTION
	BITS	fullyIncompatibleProvisioning(0), protectionSwitchingIncomplete(1), protectionConfigurationMismatch(2), epsConfigurationMismatch(3)

PrvtEpsPathStatusType
Status of the primary or backup links
TEXTUAL-CONVENTION
	INTEGER	psOk(0), psFailed(1)

PrvtEpsServiceEntry
SEQUENCE
	prvtEpsSvcId	Unsigned32
	prvtEpsServiceCfmMdLevel	Dot1agCfmMDLevelOrNone
	prvtEpsServicePrimaryLocalCfmMep	Dot1agCfmMepIdOrZero
	prvtEpsServicePrimaryRemoteCfmMep	Dot1agCfmMepIdOrZero
	prvtEpsServiceSecondaryLocalCfmMep	Dot1agCfmMepIdOrZero
	prvtEpsServiceSecondaryRemoteCfmMep	Dot1agCfmMepIdOrZero
	prvtEpsServiceLocalState	PrvtEpsRequestStateType
	prvtEpsServiceHoldOffTimer	Unsigned32
	prvtEpsServiceWaitToRestoreTimer	Unsigned32
	prvtEpsServiceApsChannel	TruthValue
	prvtEpsServiceProtection	PrvtEpsProtectionType
	prvtEpsServiceDirection	PrvtEpsDirectionType
	prvtEpsServiceRevertive	TruthValue
	prvtEpsServiceActivePath	PrvtEpsActivePathType
	prvtEpsServiceDegradeTestType	PrvtEpsMonitoringType
	prvtEpsServiceDegradeTestOwner	OCTET STRING
	prvtEpsServiceDegradeTestName	OCTET STRING
	prvtEpsServiceDegradeTestEnable	TruthValue
	prvtEpsServiceDefectFop	PrvtEpsDefectFopType
	prvtEpsServiceOperationalStatus	TruthValue
	prvtEpsServicePrimaryStatus	PrvtEpsPathStatusType
	prvtEpsServiceSecondaryStatus	PrvtEpsPathStatusType
	prvtEpsServiceRemoteState	PrvtEpsRequestStateType
	prvtEpsServiceRemoteApsChannel	TruthValue
	prvtEpsServiceRemoteProtection	PrvtEpsProtectionType
	prvtEpsServiceRemoteDirection	PrvtEpsDirectionType
	prvtEpsServiceRemoteRevertive	TruthValue
	prvtEpsServiceAdminFreeze	TruthValue
	prvtEpsServiceAdminStatus	INTEGER
	prvtEpsServiceRowStatus	RowStatus
	prvtEpsServiceProtectionCounter	Unsigned32

Defined Values

prvtEpsMib		1.3.6.1.4.1.738.1.5.132
Private MIB supporting Linear Ethernet Protection Switching (ITU-T G.8031)
MODULE-IDENTITY

prvtEpsMibNotifications		1.3.6.1.4.1.738.1.5.132.0
OBJECT IDENTIFIER

prvtEpsMibObjects		1.3.6.1.4.1.738.1.5.132.1
OBJECT IDENTIFIER

prvtEpsService		1.3.6.1.4.1.738.1.5.132.1.1
OBJECT IDENTIFIER

prvtEpsServiceTable		1.3.6.1.4.1.738.1.5.132.1.1.1
The table contains Ethernet Protection Switching services information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PrvtEpsServiceEntry

prvtEpsServiceEntry		1.3.6.1.4.1.738.1.5.132.1.1.1.1
Ethernet Protection Switching information about a specific service.
Status: current	Access: not-accessible
OBJECT-TYPE
	PrvtEpsServiceEntry

prvtEpsSvcId		1.3.6.1.4.1.738.1.5.132.1.1.1.1.1
The service ID.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

prvtEpsServiceCfmMdLevel		1.3.6.1.4.1.738.1.5.132.1.1.1.1.2
Value of the CFM MD level where the protected domain is situated.
Status: current	Access: read-create
OBJECT-TYPE
	Dot1agCfmMDLevelOrNone

prvtEpsServicePrimaryLocalCfmMep		1.3.6.1.4.1.738.1.5.132.1.1.1.1.3
Primary local CFM MEP Id.
Status: current	Access: read-create
OBJECT-TYPE
	Dot1agCfmMepIdOrZero

prvtEpsServicePrimaryRemoteCfmMep		1.3.6.1.4.1.738.1.5.132.1.1.1.1.4
Primary remote CFM MEP Id.
Status: current	Access: read-create
OBJECT-TYPE
	Dot1agCfmMepIdOrZero

prvtEpsServiceSecondaryLocalCfmMep		1.3.6.1.4.1.738.1.5.132.1.1.1.1.5
Backup local CFM MEP Id.
Status: current	Access: read-create
OBJECT-TYPE
	Dot1agCfmMepIdOrZero

prvtEpsServiceSecondaryRemoteCfmMep		1.3.6.1.4.1.738.1.5.132.1.1.1.1.6
Backup remote CFM MEP Id.
Status: current	Access: read-create
OBJECT-TYPE
	Dot1agCfmMepIdOrZero

prvtEpsServiceLocalState		1.3.6.1.4.1.738.1.5.132.1.1.1.1.7
Protection state of the local side. The values can be set: rsManualSwitch(7), rsClear(6) or rsLockoutOfProtection(15). The values can be get: rsNoRequest (0), rsDoNotRevert (1), rsReverseRequest (2), rsExercise (4), rsWaitToRestore (5), rsClear (6), rsManualSwitch (7), rsSignalDegrade (9), rsSignalFail (11), rsForcedSwitch (13), rsSignalFailForProtection (14), rsLockoutOfProtection (15).
Status: current	Access: read-create
OBJECT-TYPE
	PrvtEpsRequestStateType

prvtEpsServiceHoldOffTimer		1.3.6.1.4.1.738.1.5.132.1.1.1.1.8
Value of the Hold Off timer in msec (increments of 100msec).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10000

prvtEpsServiceWaitToRestoreTimer		1.3.6.1.4.1.738.1.5.132.1.1.1.1.9
Value of the Wait To Restore timer in seconds (0 to disable it).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 \| 5..12

prvtEpsServiceApsChannel		1.3.6.1.4.1.738.1.5.132.1.1.1.1.10
Active APS communication.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

prvtEpsServiceProtection		1.3.6.1.4.1.738.1.5.132.1.1.1.1.11
Type of protection (1+1 or 1:1).
Status: current	Access: read-only
OBJECT-TYPE
	PrvtEpsProtectionType

prvtEpsServiceDirection		1.3.6.1.4.1.738.1.5.132.1.1.1.1.12
Type of protection (unidirectional or bidirectional).
Status: current	Access: read-only
OBJECT-TYPE
	PrvtEpsDirectionType

prvtEpsServiceRevertive		1.3.6.1.4.1.738.1.5.132.1.1.1.1.13
Protection type (revertive or non-revertive).
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

prvtEpsServiceActivePath		1.3.6.1.4.1.738.1.5.132.1.1.1.1.14
Protected service active path.
Status: current	Access: read-only
OBJECT-TYPE
	PrvtEpsActivePathType

prvtEpsServiceDegradeTestType		1.3.6.1.4.1.738.1.5.132.1.1.1.1.15
Type of test used for monitoring signal degrade situations.
Status: current	Access: read-create
OBJECT-TYPE
	PrvtEpsMonitoringType

prvtEpsServiceDegradeTestOwner		1.3.6.1.4.1.738.1.5.132.1.1.1.1.16
Owner of the SAA test used for monitoring.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..32)

prvtEpsServiceDegradeTestName		1.3.6.1.4.1.738.1.5.132.1.1.1.1.17
Name of the CFM or SAA test used for monitoring.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..32)

prvtEpsServiceDegradeTestEnable		1.3.6.1.4.1.738.1.5.132.1.1.1.1.18
Start/stop CFM or SAA test for performance monitoring.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

prvtEpsServiceDefectFop		1.3.6.1.4.1.738.1.5.132.1.1.1.1.19
Defects noticed by APS protocol could be either none or a composition of the bits (0-3): fullyIncompatibleProvisioning(0) - occures by the reception of three APS frames with the incompatible 'B' bit value during the period of 22.5 seconds; protectionSwitchingIncomplete(1) - occures if the transmitted 'Requested Signal' and the received 'Bridged Signal' do not match for a period of 50ms or longer; protectionConfigurationMismatch(2) - working/protection configuration mismatch, occures by the reception of three APS frames from the working transport entity during the period of 22.5 seconds; epsConfigurationMismatch(3) - provisioning mismatch - for example the local side is set in revertive mode, the remote side is set in non revertive mode.
Status: current	Access: read-only
OBJECT-TYPE
	PrvtEpsDefectFopType

prvtEpsServiceOperationalStatus		1.3.6.1.4.1.738.1.5.132.1.1.1.1.20
The purpose of this status is to identify to the User whether this service is ready for running. The operational status can be up or down. When creating the service the operational status will be down. Receiving CCMs from both transport entities and establishment of APS on the protection transport entity will bring the operational status to up.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

prvtEpsServicePrimaryStatus		1.3.6.1.4.1.738.1.5.132.1.1.1.1.21
Primary path state (psOk(0) or psFailed(1)).
Status: current	Access: read-only
OBJECT-TYPE
	PrvtEpsPathStatusType

prvtEpsServiceSecondaryStatus		1.3.6.1.4.1.738.1.5.132.1.1.1.1.22
Secondary path state (psOk(0) or psFailed(1)).
Status: current	Access: read-only
OBJECT-TYPE
	PrvtEpsPathStatusType

prvtEpsServiceRemoteState		1.3.6.1.4.1.738.1.5.132.1.1.1.1.23
Protection state of the remote side. The values can be get: rsNoRequest (0), rsDoNotRevert (1), rsReverseRequest (2), rsExercise (4), rsWaitToRestore (5), rsClear (6), rsManualSwitch (7), rsSignalDegrade (9), rsSignalFail (11), rsForcedSwitch (13), rsSignalFailForProtection (14), rsLockoutOfProtection (15).
Status: current	Access: read-only
OBJECT-TYPE
	PrvtEpsRequestStateType

prvtEpsServiceRemoteApsChannel		1.3.6.1.4.1.738.1.5.132.1.1.1.1.24
Active APS communication reported by the remote.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

prvtEpsServiceRemoteProtection		1.3.6.1.4.1.738.1.5.132.1.1.1.1.25
Type of protection (1+1 or 1:1) reported by the remote.
Status: current	Access: read-only
OBJECT-TYPE
	PrvtEpsProtectionType

prvtEpsServiceRemoteDirection		1.3.6.1.4.1.738.1.5.132.1.1.1.1.26
Type of protection (unidirectional or bidirectional) reported by the remote.
Status: current	Access: read-only
OBJECT-TYPE
	PrvtEpsDirectionType

prvtEpsServiceRemoteRevertive		1.3.6.1.4.1.738.1.5.132.1.1.1.1.27
Protection type (revertive or non-revertive) reported by the remote.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

prvtEpsServiceAdminFreeze		1.3.6.1.4.1.738.1.5.132.1.1.1.1.28
Used to freeze the state of the protection service.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

prvtEpsServiceAdminStatus		1.3.6.1.4.1.738.1.5.132.1.1.1.1.29
Administrative status of the protection.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	up(1), down(2)

prvtEpsServiceRowStatus		1.3.6.1.4.1.738.1.5.132.1.1.1.1.30
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

prvtEpsServiceProtectionCounter		1.3.6.1.4.1.738.1.5.132.1.1.1.1.31
Counts how many times the service has gone to Protection.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtEpsDefectAlarm		1.3.6.1.4.1.738.1.5.132.0.1
1. EPS service is either operational or not operational; 2. Failure of protocol defects.
Status: current	Access: read-only
NOTIFICATION-TYPE

prvtEpsSwitchoverAlarm		1.3.6.1.4.1.738.1.5.132.0.2
The alarm is issued if the active link is changed, pointing to the path where the switchover occured.
Status: current	Access: read-only
NOTIFICATION-TYPE

prvtEpsLostCommunication		1.3.6.1.4.1.738.1.5.132.0.3
The alarm is issued in case of non reception of APS frames in three consecutive intervals each representing 5 seconds.
Status: current	Access: read-only
NOTIFICATION-TYPE

prvtEpsRestoredCommunication		1.3.6.1.4.1.738.1.5.132.0.4
APS frames are received normally after APS communication failure.
Status: current	Access: read-only
NOTIFICATION-TYPE

prvtEpsSignalFailDetected		1.3.6.1.4.1.738.1.5.132.0.5
The alarm is issued in case of CCMs are not received and (3.5 * CCMtime(CCMinterval)) has expired.
Status: current	Access: read-only
NOTIFICATION-TYPE

prvtEpsSignalDegradeDetected		1.3.6.1.4.1.738.1.5.132.0.6
The alarm is issued in case of monitored error threshold is crossed: 1W Jitter error, 2W Jitter error, Latency error, Frame loss error.
Status: current	Access: read-only
NOTIFICATION-TYPE

prvtEpsProtctSignalFailDetected		1.3.6.1.4.1.738.1.5.132.0.7
The alarm is issued in case of CCMs are not received on the protected link and (3.5 * CCMtime(CCMinterval)) has expired or the protected link is down.
Status: current	Access: read-only
NOTIFICATION-TYPE

prvtEpsSignalFailRecovery		1.3.6.1.4.1.738.1.5.132.0.8
The alarm is issued in case of CCMs start to be received correctly again after a prvtEpsSignalFailDetected alarm occured and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up .
Status: current	Access: read-only
NOTIFICATION-TYPE

prvtEpsSignalDegradeRecovery		1.3.6.1.4.1.738.1.5.132.0.9
The alarm is issued in case of monitored error threshold is crossed bellow limis: 1W Jitter error, 2W Jitter error, Latency error, Frame loss error.
Status: current	Access: read-only
NOTIFICATION-TYPE

prvtEpsProtctSignalFailRecovery		1.3.6.1.4.1.738.1.5.132.0.10
The alarm is issued in case of CCMs start to be received correctly again on the protected link after a prvtEpsProtctSignalFailDetected alarm occured and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up .
Status: current	Access: read-only
NOTIFICATION-TYPE