PRVT-ELMI-MIB

File: PRVT-ELMI-MIB.mib (13619 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB PRVT-SWITCH-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Unsigned32 Integer32 Gauge32
IpAddress MODULE-COMPLIANCE NOTIFICATION-GROUP
OBJECT-GROUP TEXTUAL-CONVENTION TruthValue
RowStatus StorageType TimeStamp
NOTIFICATION-TYPE transmission InterfaceIndex
ifIndex switch

Defined Types

PrvtELMICfgEntry  
SEQUENCE    
  prvtELMIIfEnable INTEGER
  prvtELMIIfMode INTEGER
  prvtELMIPollingCnt INTEGER
  prvtELMIPollingTimer INTEGER
  prvtELMIVerifPollTimer INTEGER
  prvtELMIStatusCnt INTEGER
  prvtELMIClearStatistics INTEGER
  prvtELMIMapEvcCEVlanType INTEGER

PrvtELMIStatisticsEntry  
SEQUENCE    
  prvtELMIStatusChange INTEGER
  prvtELMILastFullReport TimeStamp
  prvtELMITimeOuts INTEGER
  prvtELMIMsgISN INTEGER
  prvtELMIInavlidProtocolVers INTEGER
  prvtELMIEVCInvalidRefId INTEGER
  prvtELMIInavlidMsgType INTEGER
  prvtELMIOOSIE INTEGER
  prvtELMIDuplicateIE INTEGER
  prvtELMIMandatoryIEMissing INTEGER
  prvtELMIInavlidMandatoryIE INTEGER
  prvtELMIInvalidNonMandatoryIE INTEGER
  prvtELMIUnrecognizedIE INTEGER
  prvtELMIUnexpectedIE INTEGER
  prvtELMIShortMessage INTEGER

PrvtELMIEVCEntry  
SEQUENCE    
  prvtELMIEVCId INTEGER
  prvtELMIServicesId Unsigned32
  prvtELMIEVCStatus INTEGER
  prvtELMIEVCType INTEGER

PrvtELMIMapEvcCEVlanEntry  
SEQUENCE    
  prvtELMIMapEVCId INTEGER
  prvtELMIMapCeVlanId INTEGER

Defined Values

prvtELMIMib 1.3.6.1.4.1.738.1.5.120
This MIB contains managed object definitions for encapsulating E-LMI that is terminated by the UNI-C on the CE side of the UNI and by the UNI-N on the MEN side of the UNI.
MODULE-IDENTITY    

prvtELMINotifications 1.3.6.1.4.1.738.1.5.120.0
OBJECT IDENTIFIER    

prvtELMIObjects 1.3.6.1.4.1.738.1.5.120.1
OBJECT IDENTIFIER    

prvtELMIConformance 1.3.6.1.4.1.738.1.5.120.2
OBJECT IDENTIFIER    

prvtELMIEnable 1.3.6.1.4.1.738.1.5.120.1.1
E-LMI enable protocol
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

prvtELMICfgTable 1.3.6.1.4.1.738.1.5.120.1.2
This table contains object for configuring E-LMI protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PrvtELMICfgEntry

prvtELMICfgEntry 1.3.6.1.4.1.738.1.5.120.1.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PrvtELMICfgEntry  

prvtELMIIfEnable 1.3.6.1.4.1.738.1.5.120.1.2.1.1
Enables or disables E-LMI feature per interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

prvtELMIIfMode 1.3.6.1.4.1.738.1.5.120.1.2.1.2
E-LMI working mode per interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER uni-n(1), uni-c(2)  

prvtELMIPollingCnt 1.3.6.1.4.1.738.1.5.120.1.2.1.3
Polling counter - controls the number of polling cycles between Full Status exchanges. Aplicable only in UNI-C mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

prvtELMIPollingTimer 1.3.6.1.4.1.738.1.5.120.1.2.1.4
Polling timer - controls the interval at which STATUS ENQUIRY messages are transmitted. Aplicable only in UNI-C mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

prvtELMIVerifPollTimer 1.3.6.1.4.1.738.1.5.120.1.2.1.5
Polling Verification Timer - controls the interval during which information sent to the UNI-C in a STATUS message is consider valid. The Polling Verification Timer MAY be disabled and thus the PVT never expires. Polling Verification Timer is valid only for UNI-N mode. For disable the counter SET 0 value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

prvtELMIStatusCnt 1.3.6.1.4.1.738.1.5.120.1.2.1.6
Status Counter - controls the number of consecutive errors that must occur before E-LMI at the UNI is declared as not operational. Aplicable in both UNI-Cand UNI-N mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..10  

prvtELMIClearStatistics 1.3.6.1.4.1.738.1.5.120.1.2.1.7
Clear ELMI statistics per interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), clear(1)  

prvtELMIMapEvcCEVlanType 1.3.6.1.4.1.738.1.5.120.1.2.1.8
CE-VLAN ID/EVC Map Type .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER allToOneBundling(1), serviceMultiplexingWithNoBund(2), budling(3)  

prvtELMIStatisticsTable 1.3.6.1.4.1.738.1.5.120.1.3
This table contains objects for displaing E-LMI statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PrvtELMIStatisticsEntry

prvtELMIStatisticsEntry 1.3.6.1.4.1.738.1.5.120.1.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PrvtELMIStatisticsEntry  

prvtELMIStatusChange 1.3.6.1.4.1.738.1.5.120.1.3.1.1
E-LMI operational status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

prvtELMILastFullReport 1.3.6.1.4.1.738.1.5.120.1.3.1.2
E-LMI Time of the last full status report.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

prvtELMITimeOuts 1.3.6.1.4.1.738.1.5.120.1.3.1.3
Number of Status Timeouts.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIMsgISN 1.3.6.1.4.1.738.1.5.120.1.3.1.4
Number of messages with Invalid Sequence Number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIInavlidProtocolVers 1.3.6.1.4.1.738.1.5.120.1.3.1.5
Invalid Protocol Version.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIEVCInvalidRefId 1.3.6.1.4.1.738.1.5.120.1.3.1.6
Invalid Ethernet Virtual Connection Reference Id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIInavlidMsgType 1.3.6.1.4.1.738.1.5.120.1.3.1.7
Invalid Message Type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIOOSIE 1.3.6.1.4.1.738.1.5.120.1.3.1.8
Out of Sequence IE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIDuplicateIE 1.3.6.1.4.1.738.1.5.120.1.3.1.9
Duplicate IE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIMandatoryIEMissing 1.3.6.1.4.1.738.1.5.120.1.3.1.10
Mandatory IE Missing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIInavlidMandatoryIE 1.3.6.1.4.1.738.1.5.120.1.3.1.11
Invalid Mandatory IE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIInvalidNonMandatoryIE 1.3.6.1.4.1.738.1.5.120.1.3.1.12
Invalid non-Mandatory IE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIUnrecognizedIE 1.3.6.1.4.1.738.1.5.120.1.3.1.13
Unrecognized IE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIUnexpectedIE 1.3.6.1.4.1.738.1.5.120.1.3.1.14
Unexpected IE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIShortMessage 1.3.6.1.4.1.738.1.5.120.1.3.1.15
Short Message.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

prvtELMIEVCTable 1.3.6.1.4.1.738.1.5.120.1.4
This table contains objects for displaing EVC informations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PrvtELMIEVCEntry

prvtELMIEVCEntry 1.3.6.1.4.1.738.1.5.120.1.4.1
An entry display information about EVC.
Status: current Access: not-accessible
OBJECT-TYPE    
  PrvtELMIEVCEntry  

prvtELMIEVCId 1.3.6.1.4.1.738.1.5.120.1.4.1.1
An integer that uniquely identifies EVC Refernces id.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..65535  

prvtELMIServicesId 1.3.6.1.4.1.738.1.5.120.1.4.1.2
An integer that uniquely identifies Services id.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

prvtELMIEVCStatus 1.3.6.1.4.1.738.1.5.120.1.4.1.3
EVC State.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER non-active(0), new-non-active(1), active(2), new-active(3), partially-active(4), new-partially-active(5)  

prvtELMIEVCType 1.3.6.1.4.1.738.1.5.120.1.4.1.4
EVC Type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER point-to-point(1), multi-point-to-point(2)  

prvtELMIMapEvcCEVlanTable 1.3.6.1.4.1.738.1.5.120.1.5
This table contains objects for displaying the map between EVC and CE-VLAN
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PrvtELMIMapEvcCEVlanEntry

prvtELMIMapEvcCEVlanEntry 1.3.6.1.4.1.738.1.5.120.1.5.1
An entry links EVC id with CE-VLAN id.
Status: current Access: not-accessible
OBJECT-TYPE    
  PrvtELMIMapEvcCEVlanEntry  

prvtELMIMapEVCId 1.3.6.1.4.1.738.1.5.120.1.5.1.1
An integer that uniquely identifies EVC id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

prvtELMIMapCeVlanId 1.3.6.1.4.1.738.1.5.120.1.5.1.2
An integer that uniquely identifies CE-VLAN id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

prvtELMIStatus 1.3.6.1.4.1.738.1.5.120.0.1
This notification is sent when status of ELMI changes.
Status: current Access: read-only
NOTIFICATION-TYPE    

prvtELMIChangeEVC 1.3.6.1.4.1.738.1.5.120.0.2
This notification is sent when status of CE-VLAN ID/EVC Map per interface changes.
Status: current Access: read-only
NOTIFICATION-TYPE