PRVT-CFM-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	IEEE8021-CFM-MIB
PRVT-SWITCH-MIB	Q-BRIDGE-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Unsigned32	DisplayString	RowStatus
TruthValue	MacAddress	Dot1afCfmIndexIntegerNextFree
Dot1agCfmMDLevelOrNone	dot1agCfmMaCompEntry	dot1agCfmMepEntry
dot1agCfmLtrEntry	dot1agCfmMdIndex	dot1agCfmMaIndex
dot1agCfmMepIdentifier	dot1agCfmMepDbRMepIdentifier	switch
VlanId

Defined Types

PrvtCfmProfileEntry
SEQUENCE
	prvtCfmProfileIndex	Unsigned32
	prvtCfmProfileName	DisplayString
	prvtCfmProfilePriority	Unsigned32
	prvtCfmProfileRate	Unsigned32
	prvtCfmProfileSize	Unsigned32
	prvtCfmProfileBucketSize	Unsigned32
	prvtCfmProfile1wJitterError	Unsigned32
	prvtCfmProfile1wJitterWarning	Unsigned32
	prvtCfmProfileJitterError	Unsigned32
	prvtCfmProfileJitterErrorPeriod	Unsigned32
	prvtCfmProfileJitterWarning	Unsigned32
	prvtCfmProfileJitterWarningPeriod	Unsigned32
	prvtCfmProfileFrameLossError	Unsigned32
	prvtCfmProfileFrameLossWarning	Unsigned32
	prvtCfmProfileLatencyError	Unsigned32
	prvtCfmProfileLatencyErrorPeriod	Unsigned32
	prvtCfmProfileLatencyWarning	Unsigned32
	prvtCfmProfileLatencyWarningPeriod	Unsigned32
	prvtCfmProfileRowStatus	RowStatus
	prvtCfmProfile1wJitterEnable	TruthValue
	prvtCfmProfileJitterEnable	TruthValue
	prvtCfmProfileFrameLossEnable	TruthValue
	prvtCfmProfileLatencyEnable	TruthValue

PrvtCfmProcessEntry
SEQUENCE
	prvtCfmProcessIndex	Unsigned32
	prvtCfmProcessProfileIndex	Unsigned32
	prvtCfmProcessName	OCTET STRING
	prvtCfmProcessStatus	TruthValue
	prvtCfmProcessRepeatInterval	Unsigned32
	prvtCfmProcessPacketType	INTEGER
	prvtCfmProcessUnreturnedPkts	Unsigned32
	prvtCfmProcessRowStatus	RowStatus

PrvtCfmProcessResultEntry
SEQUENCE
	prvtCfmProcessResultOneWayJitter	Unsigned32
	prvtCfmProcessResultTwoWayJitter	Unsigned32
	prvtCfmProcessResultLatency	Unsigned32
	prvtCfmProcessResultFrameloss	Unsigned32

PrvtCfmMaEntry
SEQUENCE
	prvtCfmMaCompAisLckEnabled	TruthValue
	prvtCfmMaCompAisLckLevel	Dot1agCfmMDLevelOrNone
	prvtCfmMaCompAisLckInterval	INTEGER
	prvtCfmMaCompAisLckPriority	Unsigned32
	prvtCfmMaCompServiceId	Unsigned32
	prvtCfmMaCompNumberOfServices	Unsigned32
	prvtCfmMaCompClearConnectivity	Unsigned32

PrvtCfmMepEntry
SEQUENCE
	prvtCfmMepAlarmSupressed	TruthValue
	prvtCfmMepAisCondition	TruthValue
	prvtCfmMepLckCondition	TruthValue
	prvtCfmMepAisLifetime	INTEGER
	prvtCfmMepLckLifetime	INTEGER
	prvtCfmMepTransmitMcastLbm	TruthValue
	prvtCfmMepTransmitLbmInfinite	TruthValue
	prvtCfmMepTransmitLbmDelay	Unsigned32
	prvtCfmMepTransmitLbmTimeout	Unsigned32
	prvtCfmMepTransmitLtmTimeout	Unsigned32
	prvtCfmMepTransmitLbmSentPkts	Unsigned32
	prvtCfmMepTransmitLbmSuccessRate	Unsigned32
	prvtCfmMepTransmitLbmMinTime	Unsigned32
	prvtCfmMepTransmitLbmAvgTime	Unsigned32
	prvtCfmMepTransmitLbmMaxTime	Unsigned32
	prvtCfmMepSuportedRemoteMepsNo	INTEGER
	prvtCfmMepExcludeCCMTLV	DisplayString

PrvtCfmLbrEntry
SEQUENCE
	prvtCfmLbrSeqNumber	Unsigned32
	prvtCfmLbrReceiveOrder	Unsigned32
	prvtCfmLbrTime	Unsigned32
	prvtCfmLbrMacAddress	MacAddress
	prvtCfmLbrBadMsdu	TruthValue

PrvtCfmLtrEntry
SEQUENCE
	prvtCfmLtrTime	Unsigned32

PrvtCfmMaAisLckVlanEntry
SEQUENCE
	prvtCfmMaAisLckVlanId	VlanId
	prvtCfmMaAisLckVlanRowStatus	RowStatus

Defined Values

prvtCfmMib		1.3.6.1.4.1.738.1.5.131
Prvt extension of Connectivity Fault Management module for managing IEEE 802.1ag
MODULE-IDENTITY

prvtCfmMibNotifications		1.3.6.1.4.1.738.1.5.131.0
OBJECT IDENTIFIER

prvtCfmMibObjects		1.3.6.1.4.1.738.1.5.131.1
OBJECT IDENTIFIER

prvtCfmMibConformance		1.3.6.1.4.1.738.1.5.131.2
OBJECT IDENTIFIER

prvtCfmUpdateInterval		1.3.6.1.4.1.738.1.5.131.1.1
Time between monitoring parameters update (in seconds). A value of 0 suspends the monitoring task and a value different from 0 resumes it. Default is 20 seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..65535

prvtCfmStatus		1.3.6.1.4.1.738.1.5.131.1.2
Enable/disable cfm.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

prvtCfmProfile		1.3.6.1.4.1.738.1.5.131.1.3
OBJECT IDENTIFIER

prvtCfmProfileTableNextIndex		1.3.6.1.4.1.738.1.5.131.1.3.1
This object contains an unused value for prvtCfmProfileIndex in the prvtCfmProfileTable, or a zero to indicate that none exist.
Status: current	Access: read-only
OBJECT-TYPE
	Dot1afCfmIndexIntegerNextFree

prvtCfmProfileTable		1.3.6.1.4.1.738.1.5.131.1.3.2
Table contains loopback results from all remote MEPs in the MA.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PrvtCfmProfileEntry

prvtCfmProfileEntry		1.3.6.1.4.1.738.1.5.131.1.3.2.1
a
Status: current	Access: not-accessible
OBJECT-TYPE
	PrvtCfmProfileEntry

prvtCfmProfileIndex		1.3.6.1.4.1.738.1.5.131.1.3.2.1.1
Table index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

prvtCfmProfileName		1.3.6.1.4.1.738.1.5.131.1.3.2.1.2
Profile name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

prvtCfmProfilePriority		1.3.6.1.4.1.738.1.5.131.1.3.2.1.3
802.1p class-of-service setting.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..7

prvtCfmProfileRate		1.3.6.1.4.1.738.1.5.131.1.3.2.1.4
Number of Request packets to send each time.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..3

prvtCfmProfileSize		1.3.6.1.4.1.738.1.5.131.1.3.2.1.5
Size of data TLV included in probe packets (in octets).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..1462

prvtCfmProfileBucketSize		1.3.6.1.4.1.738.1.5.131.1.3.2.1.6
Number of the results to save for results calculation.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	2..255

prvtCfmProfile1wJitterError		1.3.6.1.4.1.738.1.5.131.1.3.2.1.7
Specifies one-way jitter error values to monitor in milliseconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..10000

prvtCfmProfile1wJitterWarning		1.3.6.1.4.1.738.1.5.131.1.3.2.1.8
Specifies one-way jitter warning values to monitor in milliseconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..10000

prvtCfmProfileJitterError		1.3.6.1.4.1.738.1.5.131.1.3.2.1.9
Specifies round-trip jitter error values to monitor in milliseconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..10000

prvtCfmProfileJitterErrorPeriod		1.3.6.1.4.1.738.1.5.131.1.3.2.1.10
Specifies the duration jitter occurs in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..3600

prvtCfmProfileJitterWarning		1.3.6.1.4.1.738.1.5.131.1.3.2.1.11
Specifies round-trip jitter warning values to monitor in milliseconds. If set value is greater than the jitter-error it means that the warning is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..10000

prvtCfmProfileJitterWarningPeriod		1.3.6.1.4.1.738.1.5.131.1.3.2.1.12
Specifies the duration jitter occurs in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..3600

prvtCfmProfileFrameLossError		1.3.6.1.4.1.738.1.5.131.1.3.2.1.13
Specifies round-trip frame-loss error values to monitor. The default is frame-loss of 10% is reported.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..99

prvtCfmProfileFrameLossWarning		1.3.6.1.4.1.738.1.5.131.1.3.2.1.14
Specifies round-trip frame-loss warning values to monitor. The default is frame-loss of 8% is reported. If set value is greater than the frame-loss-error it means that the warning is disable.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..99

prvtCfmProfileLatencyError		1.3.6.1.4.1.738.1.5.131.1.3.2.1.15
Specifies round-trip latency error values to monitor in milliseconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..10000

prvtCfmProfileLatencyErrorPeriod		1.3.6.1.4.1.738.1.5.131.1.3.2.1.16
Specifies the duration latency increase occurs in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..3600

prvtCfmProfileLatencyWarning		1.3.6.1.4.1.738.1.5.131.1.3.2.1.17
Specifies round-trip latency error values to monitor in milliseconds. If set value is greater than the latency-error it means that the warning is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..10000

prvtCfmProfileLatencyWarningPeriod		1.3.6.1.4.1.738.1.5.131.1.3.2.1.18
Specifies the duration latency increase occurs in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..3600

prvtCfmProfileRowStatus		1.3.6.1.4.1.738.1.5.131.1.3.2.1.19
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

prvtCfmProfile1wJitterEnable		1.3.6.1.4.1.738.1.5.131.1.3.2.1.20
A boolean showing if one way jitter calculation is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

prvtCfmProfileJitterEnable		1.3.6.1.4.1.738.1.5.131.1.3.2.1.21
A boolean showing if two way jitter calculation is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

prvtCfmProfileFrameLossEnable		1.3.6.1.4.1.738.1.5.131.1.3.2.1.22
A boolean showing if frame loss calculation is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

prvtCfmProfileLatencyEnable		1.3.6.1.4.1.738.1.5.131.1.3.2.1.23
A boolean showing if latency calculation is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

prvtCfmProcess		1.3.6.1.4.1.738.1.5.131.1.4
OBJECT IDENTIFIER

prvtCfmProcessTableNextIndex		1.3.6.1.4.1.738.1.5.131.1.4.1
This object contains an unused value for prvtCfmProcessIndex in the prvtCfmProcessTable, or a zero to indicate that none exists.
Status: current	Access: read-only
OBJECT-TYPE
	Dot1afCfmIndexIntegerNextFree

prvtCfmProcessTable		1.3.6.1.4.1.738.1.5.131.1.4.2
Private extension of dot1agCfmMaNetTable. Controls the two-way monitoring process for MEP's in the MA.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PrvtCfmProcessEntry

prvtCfmProcessEntry		1.3.6.1.4.1.738.1.5.131.1.4.2.1
a
Status: current	Access: not-accessible
OBJECT-TYPE
	PrvtCfmProcessEntry

prvtCfmProcessIndex		1.3.6.1.4.1.738.1.5.131.1.4.2.1.1
Table index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

prvtCfmProcessProfileIndex		1.3.6.1.4.1.738.1.5.131.1.4.2.1.2
Index of the monitoring profile to be used.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

prvtCfmProcessName		1.3.6.1.4.1.738.1.5.131.1.4.2.1.3
The name of the process. Should be unique per domain/MA
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..20)

prvtCfmProcessStatus		1.3.6.1.4.1.738.1.5.131.1.4.2.1.4
Enable/disable two-way monitoring process for MEP's in the MA.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

prvtCfmProcessRepeatInterval		1.3.6.1.4.1.738.1.5.131.1.4.2.1.5
Repeating frequency of the monitoring process.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..420

prvtCfmProcessPacketType		1.3.6.1.4.1.738.1.5.131.1.4.2.1.6
Use CFM Loopback or Y.1731 LMMs and DMMs packets.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	cfm(1), y1731(2)

prvtCfmProcessUnreturnedPkts		1.3.6.1.4.1.738.1.5.131.1.4.2.1.7
Number of requests for which a reply hasn't been received. These packets will be counted as lost when they enter timeout.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmProcessRowStatus		1.3.6.1.4.1.738.1.5.131.1.4.2.1.8
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

prvtCfmProcessResult		1.3.6.1.4.1.738.1.5.131.1.5
OBJECT IDENTIFIER

prvtCfmProcessResultTable		1.3.6.1.4.1.738.1.5.131.1.5.1
Table contains process results.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PrvtCfmProcessResultEntry

prvtCfmProcessResultEntry		1.3.6.1.4.1.738.1.5.131.1.5.1.1
a
Status: current	Access: not-accessible
OBJECT-TYPE
	PrvtCfmProcessResultEntry

prvtCfmProcessResultOneWayJitter		1.3.6.1.4.1.738.1.5.131.1.5.1.1.1
One way jitter calculated for a specific remote MEP in milliseconds
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmProcessResultTwoWayJitter		1.3.6.1.4.1.738.1.5.131.1.5.1.1.2
Two way jitter calculated for a specific remote MEP in milliseconds
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmProcessResultLatency		1.3.6.1.4.1.738.1.5.131.1.5.1.1.3
Two way latency calculated for a specific remote MEP in milliseconds
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmProcessResultFrameloss		1.3.6.1.4.1.738.1.5.131.1.5.1.1.4
Two way frameloss calculated for a specific remote MEP in units of hundredths of percent. Note: When prvtCfmProcessResultFrameloss has value of 10000, all the values of prvtCfmProcessResultOneWayJitter, prvtCfmProcessResultTwoWayJitter and prvtCfmProcessResultLatency are irrelevant.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..10000

prvtCfmMa		1.3.6.1.4.1.738.1.5.131.1.6
OBJECT IDENTIFIER

prvtCfmMaTable		1.3.6.1.4.1.738.1.5.131.1.6.1
Table includes extra variables needed for Y.1731 support and service awareness
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PrvtCfmMaEntry

prvtCfmMaEntry		1.3.6.1.4.1.738.1.5.131.1.6.1.1
a
Status: current	Access: not-accessible
OBJECT-TYPE
	PrvtCfmMaEntry

prvtCfmMaCompAisLckEnabled		1.3.6.1.4.1.738.1.5.131.1.6.1.1.1
Turn the AIS & LCK features on/off.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

prvtCfmMaCompAisLckLevel		1.3.6.1.4.1.738.1.5.131.1.6.1.1.2
The MD level at which AIS & LCK frames will be sent. It should be greater then that of the current domain. The default value is '-1' representing 'not-configured'.
Status: current	Access: read-write
OBJECT-TYPE
	Dot1agCfmMDLevelOrNone

prvtCfmMaCompAisLckInterval		1.3.6.1.4.1.738.1.5.131.1.6.1.1.3
The time interval at which AIS and LCK frames will be sent
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	interval1s(1), interval1min(2)

prvtCfmMaCompAisLckPriority		1.3.6.1.4.1.738.1.5.131.1.6.1.1.4
COS parameter for the outgoing AIS & LCK frames. The default value is '6'
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..7

prvtCfmMaCompServiceId		1.3.6.1.4.1.738.1.5.131.1.6.1.1.5
The primary service ID attached to this MA
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

prvtCfmMaCompNumberOfServices		1.3.6.1.4.1.738.1.5.131.1.6.1.1.6
The number of services attached to this MA
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmMaCompClearConnectivity		1.3.6.1.4.1.738.1.5.131.1.6.1.1.7
Number of MEP or 0 for all
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..8191

prvtCfmMep		1.3.6.1.4.1.738.1.5.131.1.7
OBJECT IDENTIFIER

prvtCfmMepTable		1.3.6.1.4.1.738.1.5.131.1.7.1
a
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PrvtCfmMepEntry

prvtCfmMepEntry		1.3.6.1.4.1.738.1.5.131.1.7.1.1
a
Status: current	Access: not-accessible
OBJECT-TYPE
	PrvtCfmMepEntry

prvtCfmMepAlarmSupressed		1.3.6.1.4.1.738.1.5.131.1.7.1.1.1
A boolean showing if an AIS or LCK packet was received from a lower level
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

prvtCfmMepAisCondition		1.3.6.1.4.1.738.1.5.131.1.7.1.1.2
A boolean showing if there is AIS condition. The value of the object is true (an AIS condition), when there is a detection of signal-fail condition at a Server layer or reception of AIS at a server (sub-) layer MEP [AIS condition/Rec. ITU-T Y.1731]. The AIS condition will exit when following criteria is met: During an interval equal to 3.5 times the AIS transmission period indicated in the AIS frames received earlier, the MEP does not receive AIS frames or, when ETH-CC is used, upon clearing of LOC defect at MEP /Appendix I/Rec. ITU-T Y.1731. If prvtCfmMaCompAisLckLevel is configured the MEP should send AIS packets.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

prvtCfmMepLckCondition		1.3.6.1.4.1.738.1.5.131.1.7.1.1.3
A boolean showing if the MEP should lock the service towards the client and send LCK packets
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

prvtCfmMepAisLifetime		1.3.6.1.4.1.738.1.5.131.1.7.1.1.4
The lifetime of the last received AIS packet. During an interval equal to 3.5 times the AIS transmission period indicated in the AIS frames received earlier, the MEP does not receive AIS frames. The value is valid (non-zero) if AIS packets are being received.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nolifetime(0), lifetime35s(1), lifetime35min(2)

prvtCfmMepLckLifetime		1.3.6.1.4.1.738.1.5.131.1.7.1.1.5
The lifetime of the last received LCK packet. During an interval equal to 3.5 times the LCK transmission period indicated in the LCK frames received earlier, the MEP does not receive LCK frames. The value is valid (non-zero) if AIS packets are being received.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nolifetime(0), lifetime35s(1), lifetime35min(2)

prvtCfmMepTransmitMcastLbm		1.3.6.1.4.1.738.1.5.131.1.7.1.1.6
A boolean to control sending Y.1731 multicast loopback.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

prvtCfmMepTransmitLbmInfinite		1.3.6.1.4.1.738.1.5.131.1.7.1.1.7
A boolean to control sending LBMs continuously until the operation is explicitly stopped by setting this back to false
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

prvtCfmMepTransmitLbmDelay		1.3.6.1.4.1.738.1.5.131.1.7.1.1.8
An amount of time to wait between sent LBMs (in seconds).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..60

prvtCfmMepTransmitLbmTimeout		1.3.6.1.4.1.738.1.5.131.1.7.1.1.9
An amount of time to wait after the last sent LBM if no LBR is received (in seconds).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..60

prvtCfmMepTransmitLtmTimeout		1.3.6.1.4.1.738.1.5.131.1.7.1.1.10
An amount of time to wait after the last sent LTM if no LTR is received (in seconds).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..60

prvtCfmMepTransmitLbmSentPkts		1.3.6.1.4.1.738.1.5.131.1.7.1.1.11
Number of successfully sent packets in the current LBM session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..1024

prvtCfmMepTransmitLbmSuccessRate		1.3.6.1.4.1.738.1.5.131.1.7.1.1.12
Success rate of the current LBM session (in percentage*100).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..10000

prvtCfmMepTransmitLbmMinTime		1.3.6.1.4.1.738.1.5.131.1.7.1.1.13
Minimum LBR response time (in msec).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmMepTransmitLbmAvgTime		1.3.6.1.4.1.738.1.5.131.1.7.1.1.14
Average LBR response time (in msec).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmMepTransmitLbmMaxTime		1.3.6.1.4.1.738.1.5.131.1.7.1.1.15
Maximum LBR response time (in msec).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmMepSuportedRemoteMepsNo		1.3.6.1.4.1.738.1.5.131.1.7.1.1.16
The number of suported remote meps (for TMarc3x0 and TMarc280 devices)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remoteMeps8(8), remoteMeps16(16), remoteMeps24(24), remoteMeps32(32)

prvtCfmMepExcludeCCMTLV		1.3.6.1.4.1.738.1.5.131.1.7.1.1.17
Bitmask that specifies what TLVs should be excluded(for TMarc3x0 and TMarc280 devices): On set opertaion: BIT4 = MSB Include/Exclude bit - if it is 1 the tlv is excluded from the specific CCM packet, if it is 0 the tlv will be included in the specific CCM packet BIT3 = If set 1 the OrgSpecific TLV will be excluded or included BIT2 = If set 1 the InterfaceStatus TLV will be excluded or included BIT1 = If set 1 the PortStatus TLV will be excluded or included BIT0 = LSB If set 1 the Sender ID TLV will be excluded or included Examples: If Interface Status and Port Status will be excluded the bitmask will look like this: 16 in hexadecimal BIT4 BIT3 BIT2 BIT1 BIT0 1 0 1 1 0 If Interface Status and Port Status will be included the bitmask will look like this: 06 in hexadecimal BIT4 BIT3 BIT2 BIT1 BIT0 0 0 1 1 0 On get operation it shows the bits corresponding to the excluded tlvs If Interface Status and Port Status are excluded: 06 in hexadecimal - 0 1 1 0
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(2)

prvtCfmLbrTable		1.3.6.1.4.1.738.1.5.131.1.7.2
Table contains loopback results following the last loopback operation.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PrvtCfmLbrEntry

prvtCfmLbrEntry		1.3.6.1.4.1.738.1.5.131.1.7.2.1
a
Status: current	Access: not-accessible
OBJECT-TYPE
	PrvtCfmLbrEntry

prvtCfmLbrSeqNumber		1.3.6.1.4.1.738.1.5.131.1.7.2.1.1
Transaction identifier/Sequence number of the received LBR.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4294967295

prvtCfmLbrReceiveOrder		1.3.6.1.4.1.738.1.5.131.1.7.2.1.2
An index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. This situation can appear in the case of multicast loopback.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

prvtCfmLbrTime		1.3.6.1.4.1.738.1.5.131.1.7.2.1.3
Remote MEPs response time in milliseconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmLbrMacAddress		1.3.6.1.4.1.738.1.5.131.1.7.2.1.4
Remote MEPs mac address. For unicast loopback this is the same as dot1agCfmMepTransmitLbmDestMacAddress, but for multicast loopback there will be different entries.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

prvtCfmLbrBadMsdu		1.3.6.1.4.1.738.1.5.131.1.7.2.1.5
Result of the Data TLV verification.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

prvtCfmLtrTable		1.3.6.1.4.1.738.1.5.131.1.7.3
This table adds the possibility to measure the response time to a linktrace request.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PrvtCfmLtrEntry

prvtCfmLtrEntry		1.3.6.1.4.1.738.1.5.131.1.7.3.1
a
Status: current	Access: not-accessible
OBJECT-TYPE
	PrvtCfmLtrEntry

prvtCfmLtrTime		1.3.6.1.4.1.738.1.5.131.1.7.3.1.1
Remote MPs response time in milliseconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

prvtCfmMaAisLckVlan		1.3.6.1.4.1.738.1.5.131.1.8
OBJECT IDENTIFIER

prvtCfmMaAisLckVlanTable		1.3.6.1.4.1.738.1.5.131.1.8.1
Table includes extra variables needed for AIS/LCK configurable vlans
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PrvtCfmMaAisLckVlanEntry

prvtCfmMaAisLckVlanEntry		1.3.6.1.4.1.738.1.5.131.1.8.1.1
Table includes extra variables needed for AIS/LCK configurable vlans
Status: current	Access: not-accessible
OBJECT-TYPE
	PrvtCfmMaAisLckVlanEntry

prvtCfmMaAisLckVlanId		1.3.6.1.4.1.738.1.5.131.1.8.1.1.1
Vlan ID (towards customer level) that the generated AIS/LCK packets should use.
Status: current	Access: read-write
OBJECT-TYPE
	VlanId

prvtCfmMaAisLckVlanRowStatus		1.3.6.1.4.1.738.1.5.131.1.8.1.1.2
The status of the row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

prvtCfm1wJitterThreshold		1.3.6.1.4.1.738.1.5.131.0.1
This trap should be sent whenever the one way jitter on a CFM test will surpass one of the 2 defined thresholds.
Status: current	Access: read-create
NOTIFICATION-TYPE

prvtCfmJitterThreshold		1.3.6.1.4.1.738.1.5.131.0.2
This trap should be sent whenever the two way jitter on a CFM test will surpass one of the 2 defined thresholds.
Status: current	Access: read-create
NOTIFICATION-TYPE

prvtCfmFrameLossThreshold		1.3.6.1.4.1.738.1.5.131.0.3
This trap should be sent whenever the frame loss on a CFM test will surpass one of the 2 defined thresholds.
Status: current	Access: read-create
NOTIFICATION-TYPE

prvtCfmLatencyThreshold		1.3.6.1.4.1.738.1.5.131.0.4
This trap should be sent whenever the latency on a CFM test will surpass one of the 2 defined thresholds.
Status: current	Access: read-create
NOTIFICATION-TYPE

prvtCfmAisReceived		1.3.6.1.4.1.738.1.5.131.0.5
This trap is issued whenever an AIS condition with specified lifetime on a MEP is met.
Status: current	Access: read-create
NOTIFICATION-TYPE

prvtCfmLckReceived		1.3.6.1.4.1.738.1.5.131.0.6
This trap is issued whenever an LCK condition with specified lifetime on a MEP is met.
Status: current	Access: read-create
NOTIFICATION-TYPE