PRIVATE-FEL2Mod-SW24-MIB

File: PRIVATE-FEL2Mod-SW24-MIB.mib (51343 bytes)

Imported modules

SNMPv2-TC SNMPv2-CONF SNMPv2-SMI
RFC1213-MIB

Imported symbols

DisplayString MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP enterprises MODULE-IDENTITY
OBJECT-TYPE NOTIFICATION-TYPE Counter32
IpAddress ifIndex

Defined Types

FEL2ModSW24AccountEntry  
SEQUENCE    
  feL2ModSW24AccountIndex INTEGER
  feL2ModSW24AccountAuthorization DisplayString
  feL2ModSW24AccountName DisplayString
  feL2ModSW24AccountPassword DisplayString

FEL2ModSW24TrapHostEntry  
SEQUENCE    
  feL2ModSW24TrapHostIndex INTEGER
  feL2ModSW24TrapHostIP IpAddress
  feL2ModSW24TrapHostPort INTEGER
  feL2ModSW24TrapHostCommunity DisplayString

FEL2ModSW24EventEntry  
SEQUENCE    
  feL2ModSW24EventIndex INTEGER
  feL2ModSW24EventName DisplayString
  feL2ModSW24EventSendEmail INTEGER
  feL2ModSW24EventSendSMS INTEGER
  feL2ModSW24EventSendTrap INTEGER

FEL2ModSW24EmailUserEntry  
SEQUENCE    
  feL2ModSW24EmailUserIndex INTEGER
  feL2ModSW24EmailUserAddress DisplayString

FEL2ModSW24SMSUserEntry  
SEQUENCE    
  feL2ModSW24SMSUserIndex INTEGER
  feL2ModSW24SMSUserMobilePhone DisplayString

FEL2ModSW24LogEntry  
SEQUENCE    
  feL2ModSW24LogIndex INTEGER
  feL2ModSW24LogEvent DisplayString

FEL2ModSW24PortStatusEntry  
SEQUENCE    
  feL2ModSW24PortStatusIndex INTEGER
  feL2ModSW24PortStatusMedia DisplayString
  feL2ModSW24PortStatusLink DisplayString
  feL2ModSW24PortStatusPortState DisplayString
  feL2ModSW24PortStatusAutoNego DisplayString
  feL2ModSW24PortStatusSpdDpx DisplayString
  feL2ModSW24PortStatusFlwCtrl DisplayString
  feL2ModSW24PortStatuDescription DisplayString

FEL2ModSW24PortConfEntry  
SEQUENCE    
  feL2ModSW24PortConfIndex INTEGER
  feL2ModSW24PortConfPortState INTEGER
  feL2ModSW24PortConfSpdDpx INTEGER
  feL2ModSW24PortConfFlwCtrl INTEGER
  feL2ModSW24PortConfDescription DisplayString

FEL2ModSW24MaxPktLenConfEntry  
SEQUENCE    
  feL2ModSW24MaxPktLenConfIndex INTEGER
  feL2ModSW24MaxPktLenConfSetting INTEGER

FEL2ModSW24BandwidthConfEntry  
SEQUENCE    
  feL2ModSW24BandwidthConfIndex INTEGER
  feL2ModSW24BandwidthConfIngressState INTEGER
  feL2ModSW24BandwidthConfIngressBW INTEGER
  feL2ModSW24BandwidthConfStormState INTEGER
  feL2ModSW24BandwidthConfStormBW INTEGER
  feL2ModSW24BandwidthConfEgressState INTEGER
  feL2ModSW24BandwidthConfEgressBW INTEGER

FEL2ModSW24LoopDetectedEntry  
SEQUENCE    
  feL2ModSW24LoopDetectedfIndex INTEGER
  feL2ModSW24LoopDetectedStateEbl INTEGER
  feL2ModSW24LoopDetectedCurrentStatus INTEGER
  feL2ModSW24LoopDetectedResumed INTEGER

FEL2ModSW24SFPInfoEntry  
SEQUENCE    
  feL2ModSW24SFPInfoIndex INTEGER
  feL2ModSW24SFPConnectorType DisplayString
  feL2ModSW24SFPFiberType DisplayString
  feL2ModSW24SFPWavelength DisplayString
  feL2ModSW24SFPBaudRate DisplayString
  feL2ModSW24SFPVendorOUI DisplayString
  feL2ModSW24SFPVendorName DisplayString
  feL2ModSW24SFPVendorPN DisplayString
  feL2ModSW24SFPVendorRev DisplayString
  feL2ModSW24SFPVendorSN DisplayString
  feL2ModSW24SFPDateCode DisplayString
  feL2ModSW24SFPTemperature DisplayString
  feL2ModSW24SFPVcc DisplayString
  feL2ModSW24SFPTxBias DisplayString
  feL2ModSW24SFPTxPWR DisplayString
  feL2ModSW24SFPRxPWR DisplayString

Defined Values

privatetech 1.3.6.1.4.1.5205
The MIB module is for xxx Tech.
MODULE-IDENTITY    

switch 1.3.6.1.4.1.5205.2
OBJECT IDENTIFIER    

feL2ModSW24ProductID 1.3.6.1.4.1.5205.2.19
OBJECT IDENTIFIER    

feL2ModSW24Produces 1.3.6.1.4.1.5205.2.19.1
OBJECT IDENTIFIER    

feL2ModSW24System 1.3.6.1.4.1.5205.2.19.1.1
OBJECT IDENTIFIER    

feL2ModSW24CommonSys 1.3.6.1.4.1.5205.2.19.1.1.1
OBJECT IDENTIFIER    

feL2ModSW24Reboot 1.3.6.1.4.1.5205.2.19.1.1.1.1
Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1 | 2  

feL2ModSW24BiosVsersion 1.3.6.1.4.1.5205.2.19.1.1.1.2
Get the BIOS version of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24FirmwareVersion 1.3.6.1.4.1.5205.2.19.1.1.1.3
Get the firmware version of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24HardwareVersion 1.3.6.1.4.1.5205.2.19.1.1.1.4
Get the hardware version of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24MechanicalVersion 1.3.6.1.4.1.5205.2.19.1.1.1.5
Get the mechanical version of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SerialNumber 1.3.6.1.4.1.5205.2.19.1.1.1.6
Get the Serial number of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24HostMacAddress 1.3.6.1.4.1.5205.2.19.1.1.1.7
Get the MAC address of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24DevicePort 1.3.6.1.4.1.5205.2.19.1.1.1.8
Get the quantity of ports that this system owns now.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24RamSize 1.3.6.1.4.1.5205.2.19.1.1.1.9
Get the RAM size of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24FlashSize 1.3.6.1.4.1.5205.2.19.1.1.1.10
Get the flash size of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24IP 1.3.6.1.4.1.5205.2.19.1.1.2
OBJECT IDENTIFIER    

feL2ModSW24DhcpSetting 1.3.6.1.4.1.5205.2.19.1.1.2.1
Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24IPAddress 1.3.6.1.4.1.5205.2.19.1.1.2.2
Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

feL2ModSW24NetMask 1.3.6.1.4.1.5205.2.19.1.1.2.3
Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

feL2ModSW24DefaultGateway 1.3.6.1.4.1.5205.2.19.1.1.2.4
Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

feL2ModSW24DnsSetting 1.3.6.1.4.1.5205.2.19.1.1.2.5
Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - auto, the DNS server is assigned by DHCP server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24DnsServer 1.3.6.1.4.1.5205.2.19.1.1.2.6
Get/Set the DNS server of the system.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

feL2ModSW24Time 1.3.6.1.4.1.5205.2.19.1.1.3
OBJECT IDENTIFIER    

feL2ModSW24SystemCurrentTime 1.3.6.1.4.1.5205.2.19.1.1.3.1
Get the current time of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24ManualTimeSetting 1.3.6.1.4.1.5205.2.19.1.1.3.2
Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . The value range: Year : 2000 - 2036, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59, Sec : 0 - 59.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24NTPServer 1.3.6.1.4.1.5205.2.19.1.1.3.3
Get/Set the NTP Time Server. You can use the IP address or domain name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24NTPTimeZone 1.3.6.1.4.1.5205.2.19.1.1.3.4
Get/Set the NTP Time Zone. The value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -07:00, -6 - GMT -06:00, -5 - GMT -05:00, -4 - GMT -04:00, -3 - GMT -03:00, -2 - GMT -02:00, -1 - GMT -01:00, 0 - GMT +00:00, 1 - GMT +01:00, 2 - GMT +02:00, 3 - GMT +03:00, 4 - GMT +04:00, 5 - GMT +05:00, 6 - GMT +06:00, 7 - GMT +07:00, 8 - GMT +08:00, 9 - GMT +09:00, 10 - GMT +10:00, 11 - GMT +11:00, 12 - GMT +12:00, 13 - GMT +13:00.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -12..13  

feL2ModSW24NTPTimeSync 1.3.6.1.4.1.5205.2.19.1.1.3.5
Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! The value range (0|1): 1 - sync. 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24DaylightSavingTime 1.3.6.1.4.1.5205.2.19.1.1.3.6
Get/Set the daylight saving time. The value range is between -5 and 5. (Unit: hour)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -5..5  

feL2ModSW24DaylightStartTime 1.3.6.1.4.1.5205.2.19.1.1.3.7
Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01/00 month: 01~12, day: 01~31, hour: 00~23 .
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24DaylightEndTime 1.3.6.1.4.1.5205.2.19.1.1.3.8
Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/00 month: 01~12, day: 01~31, hour: 00~23 .
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24Account 1.3.6.1.4.1.5205.2.19.1.1.4
OBJECT IDENTIFIER    

feL2ModSW24AccountNumber 1.3.6.1.4.1.5205.2.19.1.1.4.1
Get the current account number(s) of the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

feL2ModSW24AccountTable 1.3.6.1.4.1.5205.2.19.1.1.4.2
This is a list of FEL2ModSW24AccountEntry. The numbers of entries are given by the value of feL2ModSW24AccountNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24AccountEntry

feL2ModSW24AccountEntry 1.3.6.1.4.1.5205.2.19.1.1.4.2.1
This is the Entry(s) for account information.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24AccountEntry  

feL2ModSW24AccountIndex 1.3.6.1.4.1.5205.2.19.1.1.4.2.1.1
This is the index of the account entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

feL2ModSW24AccountAuthorization 1.3.6.1.4.1.5205.2.19.1.1.4.2.1.2
This is the authorization of the account entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24AccountName 1.3.6.1.4.1.5205.2.19.1.1.4.2.1.3
This is the username of the account entry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24AccountPassword 1.3.6.1.4.1.5205.2.19.1.1.4.2.1.4
This is the password of the account entry. The return value is always '********'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24AccountAddName 1.3.6.1.4.1.5205.2.19.1.1.4.3
This is the account name for adding operation.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24AccountAddPassword 1.3.6.1.4.1.5205.2.19.1.1.4.4
This is the account password for adding operation. The return value is always '********'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24DoAccountAdd 1.3.6.1.4.1.5205.2.19.1.1.4.5
Add account name. OID feL2ModSW24AccountAddName and feL2ModSW24AccountAddPassword must be filled first. Get this OID always return zero. 1 - add account. 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24AccountDel 1.3.6.1.4.1.5205.2.19.1.1.4.6
Delete account. The value is valid feL2ModSW24AccountIndex(Can't delete administrator).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..5  

feL2ModSW24Snmp 1.3.6.1.4.1.5205.2.19.1.2
OBJECT IDENTIFIER    

feL2ModSW24GetCommunity 1.3.6.1.4.1.5205.2.19.1.2.1
Get/Set the get-community of the SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SetCommunity 1.3.6.1.4.1.5205.2.19.1.2.2
Get/Set the set-community of the SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24TrapHostNumber 1.3.6.1.4.1.5205.2.19.1.2.3
Get the number of trap hosts.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

feL2ModSW24TrapHostTable 1.3.6.1.4.1.5205.2.19.1.2.4
A list of trap host entry. The numbers of entries are given by the value of feL2ModSW24TrapHostNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24TrapHostEntry

feL2ModSW24TrapHostEntry 1.3.6.1.4.1.5205.2.19.1.2.4.1
This is the entry information for trap host.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24TrapHostEntry  

feL2ModSW24TrapHostIndex 1.3.6.1.4.1.5205.2.19.1.2.4.1.1
The index of the trap host entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

feL2ModSW24TrapHostIP 1.3.6.1.4.1.5205.2.19.1.2.4.1.2
This is the IP of the trap host.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

feL2ModSW24TrapHostPort 1.3.6.1.4.1.5205.2.19.1.2.4.1.3
This is the receiving-port number of the trap host.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

feL2ModSW24TrapHostCommunity 1.3.6.1.4.1.5205.2.19.1.2.4.1.4
The community name for the trap PDU.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24Alarm 1.3.6.1.4.1.5205.2.19.1.3
OBJECT IDENTIFIER    

feL2ModSW24Event 1.3.6.1.4.1.5205.2.19.1.3.1
OBJECT IDENTIFIER    

feL2ModSW24EventNumber 1.3.6.1.4.1.5205.2.19.1.3.1.1
Get the total number of alarm events.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24EventTable 1.3.6.1.4.1.5205.2.19.1.3.1.2
A list of alarm event entry. The numbers of entries are given by the value of feL2ModSW24EventNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24EventEntry

feL2ModSW24EventEntry 1.3.6.1.4.1.5205.2.19.1.3.1.2.1
This is the entry information for alarm event.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24EventEntry  

feL2ModSW24EventIndex 1.3.6.1.4.1.5205.2.19.1.3.1.2.1.1
This is the index of the alarm event entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24EventName 1.3.6.1.4.1.5205.2.19.1.3.1.2.1.2
This is the alarm event name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24EventSendEmail 1.3.6.1.4.1.5205.2.19.1.3.1.2.1.3
Send email when alarm event is triggered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24EventSendSMS 1.3.6.1.4.1.5205.2.19.1.3.1.2.1.4
Send SMS when alarm event is triggered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24EventSendTrap 1.3.6.1.4.1.5205.2.19.1.3.1.2.1.5
Send trap when alarm event is triggered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24Email 1.3.6.1.4.1.5205.2.19.1.3.2
OBJECT IDENTIFIER    

feL2ModSW24EmailServer 1.3.6.1.4.1.5205.2.19.1.3.2.1
This is the SMTP server for alarm event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24EmailUsername 1.3.6.1.4.1.5205.2.19.1.3.2.2
This is the Username of SMTP server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24EmailPassword 1.3.6.1.4.1.5205.2.19.1.3.2.3
This is the User Password of SMTP server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24EmailUserNumber 1.3.6.1.4.1.5205.2.19.1.3.2.4
The number of the email users that you want to send the alarm notification.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

feL2ModSW24EmailUserTable 1.3.6.1.4.1.5205.2.19.1.3.2.5
This is a list of email user entry. The numbers of entries are given by the value of feL2ModSW24EmailUserNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24EmailUserEntry

feL2ModSW24EmailUserEntry 1.3.6.1.4.1.5205.2.19.1.3.2.5.1
This is the Entry information for email user entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24EmailUserEntry  

feL2ModSW24EmailUserIndex 1.3.6.1.4.1.5205.2.19.1.3.2.5.1.1
This is the index of the email user entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

feL2ModSW24EmailUserAddress 1.3.6.1.4.1.5205.2.19.1.3.2.5.1.2
This is the email address of the email user entry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SMS 1.3.6.1.4.1.5205.2.19.1.3.3
OBJECT IDENTIFIER    

feL2ModSW24SMSServer 1.3.6.1.4.1.5205.2.19.1.3.3.1
This is the SMS server for alarm event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SMSUsername 1.3.6.1.4.1.5205.2.19.1.3.3.2
This is the Username of SMS server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SMSPassword 1.3.6.1.4.1.5205.2.19.1.3.3.3
This is the Password of SMS server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SMSUserNumber 1.3.6.1.4.1.5205.2.19.1.3.3.4
The number of the SMS users that you want to send the alarm notification.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

feL2ModSW24SMSUserTable 1.3.6.1.4.1.5205.2.19.1.3.3.5
This is a list of SMS user entry. The numbers of entries are given by the value of feL2ModSW24SMSUserNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24SMSUserEntry

feL2ModSW24SMSUserEntry 1.3.6.1.4.1.5205.2.19.1.3.3.5.1
This is the Entry information for SMS user entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24SMSUserEntry  

feL2ModSW24SMSUserIndex 1.3.6.1.4.1.5205.2.19.1.3.3.5.1.1
This is the index of the SMS user entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

feL2ModSW24SMSUserMobilePhone 1.3.6.1.4.1.5205.2.19.1.3.3.5.1.2
The SMS phone number of the SMS user entry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24Tftp 1.3.6.1.4.1.5205.2.19.1.4
OBJECT IDENTIFIER    

feL2ModSW24TftpServer 1.3.6.1.4.1.5205.2.19.1.4.1
Get/Set the tftp server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

feL2ModSW24Configuration 1.3.6.1.4.1.5205.2.19.1.5
OBJECT IDENTIFIER    

feL2ModSW24SaveRestore 1.3.6.1.4.1.5205.2.19.1.5.1
OBJECT IDENTIFIER    

feL2ModSW24SaveStart 1.3.6.1.4.1.5205.2.19.1.5.1.1
Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24SaveUser 1.3.6.1.4.1.5205.2.19.1.5.1.2
Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24RestoreDefault 1.3.6.1.4.1.5205.2.19.1.5.1.3
Restore factory default configuration. Get this OID always return zero. 2 - restore default included default ip address. 1 - restore default without changing current ip address. 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1 | 2  

feL2ModSW24RestoreUser 1.3.6.1.4.1.5205.2.19.1.5.1.4
Restore user configuration. Get this OID always return zero. 1 - restore. 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24ConfigFile 1.3.6.1.4.1.5205.2.19.1.5.2
OBJECT IDENTIFIER    

feL2ModSW24ExportConfigName 1.3.6.1.4.1.5205.2.19.1.5.2.1
Get/Set the export file path and name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24DoExportConfig 1.3.6.1.4.1.5205.2.19.1.5.2.2
Do export-config. Get this oid always return zero. 1 - export start section. 2 - export user-conf section.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1 | 2  

feL2ModSW24ImportConfigName 1.3.6.1.4.1.5205.2.19.1.5.2.3
Get/Set the import file path and name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24DoImportConfig 1.3.6.1.4.1.5205.2.19.1.5.2.4
Do import-config. Get this OID always return zero. 1 - import start section. 2 - import user-conf section.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1 | 2  

feL2ModSW24Diagnostic 1.3.6.1.4.1.5205.2.19.1.6
OBJECT IDENTIFIER    

feL2ModSW24EEPROMTest 1.3.6.1.4.1.5205.2.19.1.6.1
EEPROM access test.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24UartTest 1.3.6.1.4.1.5205.2.19.1.6.2
UART access test.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24DramTest 1.3.6.1.4.1.5205.2.19.1.6.3
DRAM access test.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24FlashTest 1.3.6.1.4.1.5205.2.19.1.6.4
Flash memory access test.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24InternalLoopbackTest 1.3.6.1.4.1.5205.2.19.1.6.5
Internal loopback test.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24ExternalLoopbackTest 1.3.6.1.4.1.5205.2.19.1.6.6
External loopback test.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24PingTest 1.3.6.1.4.1.5205.2.19.1.6.7
Set the host address that you want to ping and the system will return the test result.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24Log 1.3.6.1.4.1.5205.2.19.1.7
OBJECT IDENTIFIER    

feL2ModSW24ClearLog 1.3.6.1.4.1.5205.2.19.1.7.1
Clear system log. Get this OID always return zero. 1 - clear log. 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24UploadLog 1.3.6.1.4.1.5205.2.19.1.7.2
Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - upload log 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24AutoUploadLogState 1.3.6.1.4.1.5205.2.19.1.7.3
Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - Enable auto-upload 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24LogNumber 1.3.6.1.4.1.5205.2.19.1.7.4
Get the number of current system log.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..120  

feL2ModSW24LogTable 1.3.6.1.4.1.5205.2.19.1.7.5
This is a list of log entry. The numbers of entries are given by the value of feL2ModSW24LogNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24LogEntry

feL2ModSW24LogEntry 1.3.6.1.4.1.5205.2.19.1.7.5.1
This is the Entry information for system log.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24LogEntry  

feL2ModSW24LogIndex 1.3.6.1.4.1.5205.2.19.1.7.5.1.1
This is the index of the log entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

feL2ModSW24LogEvent 1.3.6.1.4.1.5205.2.19.1.7.5.1.2
This is the detail information of the log entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24Firmware 1.3.6.1.4.1.5205.2.19.1.8
OBJECT IDENTIFIER    

feL2ModSW24FirmwareFileName 1.3.6.1.4.1.5205.2.19.1.8.1
Get/Set the path and filename for firmware upgrading.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24DoFirmwareUpgrade 1.3.6.1.4.1.5205.2.19.1.8.2
Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24Port 1.3.6.1.4.1.5205.2.19.1.9
OBJECT IDENTIFIER    

feL2ModSW24PortStatus 1.3.6.1.4.1.5205.2.19.1.9.1
OBJECT IDENTIFIER    

feL2ModSW24PortStatusNumber 1.3.6.1.4.1.5205.2.19.1.9.1.1
Get the number of port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24PortStatusTable 1.3.6.1.4.1.5205.2.19.1.9.1.2
This is a list of port status entry. The numbers of entries are given by the value of feL2ModSW24PortStatusNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24PortStatusEntry

feL2ModSW24PortStatusEntry 1.3.6.1.4.1.5205.2.19.1.9.1.2.1
This is the entry(s) for port status information.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24PortStatusEntry  

feL2ModSW24PortStatusIndex 1.3.6.1.4.1.5205.2.19.1.9.1.2.1.1
This is the index of the port status entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24PortStatusMedia 1.3.6.1.4.1.5205.2.19.1.9.1.2.1.2
The port media type of the port status entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  


feL2ModSW24PortStatusPortState 1.3.6.1.4.1.5205.2.19.1.9.1.2.1.4
This is the port state of the port status entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24PortStatusAutoNego 1.3.6.1.4.1.5205.2.19.1.9.1.2.1.5
This is the auto negotiation of the port status entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24PortStatusSpdDpx 1.3.6.1.4.1.5205.2.19.1.9.1.2.1.6
This is the speed/duplex of the port status entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24PortStatusFlwCtrl 1.3.6.1.4.1.5205.2.19.1.9.1.2.1.7
This is the flow control of the port status entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24PortStatuDescription 1.3.6.1.4.1.5205.2.19.1.9.1.2.1.8
The description of port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24PortConf 1.3.6.1.4.1.5205.2.19.1.9.2
OBJECT IDENTIFIER    

feL2ModSW24PortConfNumber 1.3.6.1.4.1.5205.2.19.1.9.2.1
Get the number of port configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24PortConfTable 1.3.6.1.4.1.5205.2.19.1.9.2.2
This is a list of port configuration entry. The numbers of entries are given by the value of feL2ModSW24PortConfNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24PortConfEntry

feL2ModSW24PortConfEntry 1.3.6.1.4.1.5205.2.19.1.9.2.2.1
This is the Entry(s) for port configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24PortConfEntry  

feL2ModSW24PortConfIndex 1.3.6.1.4.1.5205.2.19.1.9.2.2.1.1
This is the index of the port configuration entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24PortConfPortState 1.3.6.1.4.1.5205.2.19.1.9.2.2.1.2
This is the port state of the port configuration entry. 0 - disabled. 1 - enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24PortConfSpdDpx 1.3.6.1.4.1.5205.2.19.1.9.2.2.1.3
This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

feL2ModSW24PortConfFlwCtrl 1.3.6.1.4.1.5205.2.19.1.9.2.2.1.4
This is the flow control of the port configuration entry. 0 - disabled. 1 - enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24PortConfDescription 1.3.6.1.4.1.5205.2.19.1.9.2.2.1.5
The description of port.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24Mirror 1.3.6.1.4.1.5205.2.19.1.10
OBJECT IDENTIFIER    

feL2ModSW24MirrorMode 1.3.6.1.4.1.5205.2.19.1.10.1
Get/Set the Mirror mode. 0 - disabled. 1 - rx enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24MirroringPort 1.3.6.1.4.1.5205.2.19.1.10.2
Get/Set the mirroring port. The port range is from 1 to 24.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24MirroredPorts 1.3.6.1.4.1.5205.2.19.1.10.3
Get/Set the monitored ports. The port range is from 1 to 24, and the syntax is 1,5-7.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

feL2ModSW24MaxPktLen 1.3.6.1.4.1.5205.2.19.1.11
OBJECT IDENTIFIER    

feL2ModSW24MaxPktLen1 1.3.6.1.4.1.5205.2.19.1.11.1
OBJECT IDENTIFIER    

feL2ModSW24MaxPktLenPortNumber 1.3.6.1.4.1.5205.2.19.1.11.1.1
Get the number of Max. packet length.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24MaxPktLenConfTable 1.3.6.1.4.1.5205.2.19.1.11.1.2
This is a list of Max. packet length entry. The numbers of entries are given by the value of feL2ModSW24MaxPktLenPortNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24MaxPktLenConfEntry

feL2ModSW24MaxPktLenConfEntry 1.3.6.1.4.1.5205.2.19.1.11.1.2.1
Entry(s) for Max. packet length information.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24MaxPktLenConfEntry  

feL2ModSW24MaxPktLenConfIndex 1.3.6.1.4.1.5205.2.19.1.11.1.2.1.1
This is the index of the Max. packet length entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24MaxPktLenConfSetting 1.3.6.1.4.1.5205.2.19.1.11.1.2.1.2
Get/Set the Max. packet length. The Max. packet length is 1518,1532,or 9216.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1518 | 1532 | 9216  

feL2ModSW24Bandwidth 1.3.6.1.4.1.5205.2.19.1.12
OBJECT IDENTIFIER    

feL2ModSW24Bandwidth1 1.3.6.1.4.1.5205.2.19.1.12.1
OBJECT IDENTIFIER    

feL2ModSW24BandwidthPortNumber 1.3.6.1.4.1.5205.2.19.1.12.1.1
Get the number of bandwidth management configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24BandwidthConfTable 1.3.6.1.4.1.5205.2.19.1.12.1.2
A list of bandwidth management configuration entry. The numbers of entries are given by the value of feL2ModSW24BandwidthPortNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24BandwidthConfEntry

feL2ModSW24BandwidthConfEntry 1.3.6.1.4.1.5205.2.19.1.12.1.2.1
This is the Entry(s) for bandwidth management configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24BandwidthConfEntry  

feL2ModSW24BandwidthConfIndex 1.3.6.1.4.1.5205.2.19.1.12.1.2.1.1
This is the index of the bandwidth management configuration entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24BandwidthConfIngressState 1.3.6.1.4.1.5205.2.19.1.12.1.2.1.2
The ingress state of the bandwidth management configures entry. 0 - disabled. 1 - enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24BandwidthConfIngressBW 1.3.6.1.4.1.5205.2.19.1.12.1.2.1.3
Get/Set the ingress rate of the bandwidth management configuration. The ingress rate is from 0 to 1000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

feL2ModSW24BandwidthConfStormState 1.3.6.1.4.1.5205.2.19.1.12.1.2.1.4
The storm state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24BandwidthConfStormBW 1.3.6.1.4.1.5205.2.19.1.12.1.2.1.5
Get/Set the storm rate of the bandwidth management configuration. The storm rate is from 0 to 1000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

feL2ModSW24BandwidthConfEgressState 1.3.6.1.4.1.5205.2.19.1.12.1.2.1.6
The egress state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24BandwidthConfEgressBW 1.3.6.1.4.1.5205.2.19.1.12.1.2.1.7
Get/Set the egress rate of the bandwidth management configuration. The egress rate is from 0 to 1000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

feL2ModSW24LoopDetectedConf 1.3.6.1.4.1.5205.2.19.1.13
OBJECT IDENTIFIER    

feL2ModSW24LoopDetectedNumber 1.3.6.1.4.1.5205.2.19.1.13.1
Get the number of loop detected entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24LoopDetectedTable 1.3.6.1.4.1.5205.2.19.1.13.2
A list of loop detected entry. The numbers of entries are given by the value of feL2ModSW24LoopDetectedNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24LoopDetectedEntry

feL2ModSW24LoopDetectedEntry 1.3.6.1.4.1.5205.2.19.1.13.2.1
Entry(s) for loop detected information.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24LoopDetectedEntry  

feL2ModSW24LoopDetectedfIndex 1.3.6.1.4.1.5205.2.19.1.13.2.1.1
The index of the loop detected entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24LoopDetectedStateEbl 1.3.6.1.4.1.5205.2.19.1.13.2.1.2
The state of the loop detected entry. 0 - disabled. 1 - enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24LoopDetectedCurrentStatus 1.3.6.1.4.1.5205.2.19.1.13.2.1.3
The current status of the loop detected port. 0 - unlocked 1 - locked due to the loop condition
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24LoopDetectedResumed 1.3.6.1.4.1.5205.2.19.1.13.2.1.4
Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - unlock the port, 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24LoopDetectedAction 1.3.6.1.4.1.5205.2.19.1.13.3
Set the corresponding action while loop is detected. 1 - lock the loop port, 0 - do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

feL2ModSW24SFPInfo 1.3.6.1.4.1.5205.2.19.1.14
OBJECT IDENTIFIER    

feL2ModSW24SFPInfoNumber 1.3.6.1.4.1.5205.2.19.1.14.1
Get the number of sfp info entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24SFPInfoTable 1.3.6.1.4.1.5205.2.19.1.14.2
A list of sfp info entry. The numbers of entries are given by the value of feL2ModSW24SFPInfoNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEL2ModSW24SFPInfoEntry

feL2ModSW24SFPInfoEntry 1.3.6.1.4.1.5205.2.19.1.14.2.1
Entry(s) for SFP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  FEL2ModSW24SFPInfoEntry  

feL2ModSW24SFPInfoIndex 1.3.6.1.4.1.5205.2.19.1.14.2.1.1
The index of the sfp info entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

feL2ModSW24SFPConnectorType 1.3.6.1.4.1.5205.2.19.1.14.2.1.2
Get connector type of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPFiberType 1.3.6.1.4.1.5205.2.19.1.14.2.1.3
Get fiber type of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPWavelength 1.3.6.1.4.1.5205.2.19.1.14.2.1.4
Get tx central wavelength of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPBaudRate 1.3.6.1.4.1.5205.2.19.1.14.2.1.5
Get baud rate of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPVendorOUI 1.3.6.1.4.1.5205.2.19.1.14.2.1.6
Get vendor OUI of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPVendorName 1.3.6.1.4.1.5205.2.19.1.14.2.1.7
Get vendor name of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPVendorPN 1.3.6.1.4.1.5205.2.19.1.14.2.1.8
Get vendor part number of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPVendorRev 1.3.6.1.4.1.5205.2.19.1.14.2.1.9
Get vendor revision number of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPVendorSN 1.3.6.1.4.1.5205.2.19.1.14.2.1.10
Get vendor serial number of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPDateCode 1.3.6.1.4.1.5205.2.19.1.14.2.1.11
Get data code of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPTemperature 1.3.6.1.4.1.5205.2.19.1.14.2.1.12
Get current temperature of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPVcc 1.3.6.1.4.1.5205.2.19.1.14.2.1.13
Get current internal supply voltage of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPTxBias 1.3.6.1.4.1.5205.2.19.1.14.2.1.14
Get current TX Bias of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPTxPWR 1.3.6.1.4.1.5205.2.19.1.14.2.1.15
Get current TX output power of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24SFPRxPWR 1.3.6.1.4.1.5205.2.19.1.14.2.1.16
Get current Received Power of the sfp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

feL2ModSW24TrapEntry 1.3.6.1.4.1.5205.2.19.1.20
OBJECT IDENTIFIER    

feL2ModSW24ModuleInserted 1.3.6.1.4.1.5205.2.19.1.20.1
Send the trap when a module is inserted to the system. The OID value means the port number.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24ModuleRemoved 1.3.6.1.4.1.5205.2.19.1.20.2
Send the trap when a module is removed from the system. The OID value means the port number.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24LoopDetected 1.3.6.1.4.1.5205.2.19.1.20.5
Send the trap when loop condition has been detected. The OID value means the port number.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24StpStateDisabled 1.3.6.1.4.1.5205.2.19.1.20.100
Send the trap when the operational state of STP is from enabled to disabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24StpStateEnabled 1.3.6.1.4.1.5205.2.19.1.20.101
Send the trap when the operational state of STP is from disabled to enabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24StpTopologyChanged 1.3.6.1.4.1.5205.2.19.1.20.102
Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces the topology change
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24LacpStateDisabled 1.3.6.1.4.1.5205.2.19.1.20.120
Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24LacpStateEnabled 1.3.6.1.4.1.5205.2.19.1.20.121
Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24LacpPortAdded 1.3.6.1.4.1.5205.2.19.1.20.123
Send the trap when the state of port is in 'trunk ready'.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24LacpPortTrunkFailure 1.3.6.1.4.1.5205.2.19.1.20.124
Send the trap when one port is not able to be aggregated due to duplex-mode of the port.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24GvrpStateDisabled 1.3.6.1.4.1.5205.2.19.1.20.140
Send the trap when the operational state of GVRP is from enabled to disabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24GvrpStateEnabled 1.3.6.1.4.1.5205.2.19.1.20.141
Send the trap when the operational state of LACP is from disabled to enabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24VlanStateDisabled 1.3.6.1.4.1.5205.2.19.1.20.150
Send the trap when the operational state of vlan is from enabled to disabled. The OID value means the enabled Group ID.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24VlanPortBaseEnabled 1.3.6.1.4.1.5205.2.19.1.20.151
Send the trap when the operational state of vlan is changed to port-based vlan.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24VlanTagBaseEnabled 1.3.6.1.4.1.5205.2.19.1.20.152
Send the trap when the operational state of vlan is changed to tag-based vlan.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24VlanMetroModeEnabled 1.3.6.1.4.1.5205.2.19.1.20.153
Send the trap when the operational state of vlan is changed to Metro-mode vlan. The OID value means the uplink port with this metro-mode vlan.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24VlanDoubleTagEnabled 1.3.6.1.4.1.5205.2.19.1.20.154
Send the trap when the operational state of vlan is changed to Double-tag vlan.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24UserLogin 1.3.6.1.4.1.5205.2.19.1.20.200
Send the trap when one user logins the system.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24UserLogout 1.3.6.1.4.1.5205.2.19.1.20.201
Send the trap when one user logouts the system.
Status: current Access: read-only
NOTIFICATION-TYPE    

feL2ModSW24TrapVariable 1.3.6.1.4.1.5205.2.19.1.21
OBJECT IDENTIFIER    

username 1.3.6.1.4.1.5205.2.19.1.21.1
System account name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

groupId 1.3.6.1.4.1.5205.2.19.1.21.2
The Trunk group ID of LACP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

actorkey 1.3.6.1.4.1.5205.2.19.1.21.3
This is the actor key information for LACP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

partnerkey 1.3.6.1.4.1.5205.2.19.1.21.4
This is the partner key information for LACP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  


Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor