PORT-MIB

File: PORT-MIB.mib (81595 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI CORIOLIS-MIB
CARD-MIB IF-MIB EtherLike-MIB
MAU-MIB SONET-MIB SNMPv2-TC
RFC-1215

Imported symbols

Counter Unsigned32 OBJECT-TYPE
MODULE-IDENTITY Integer32 Counter32
Counter64 port coriolisMibs
slotNo ifAdminStatus ifOperStatus
ifSpeed InterfaceIndex dot3StatsDuplexStatus
ifMauAutoNegConfig sonetSectionCurrentStatus sonetLineCurrentStatus
sonetPathCurrentStatus sonetVTCurrentStatus TruthValue
TRAP-TYPE

Defined Types

PortEntry  
SEQUENCE    
  portNo INTEGER
  mib2IfIndex InterfaceIndex

EtherPortEntry  
SEQUENCE    
  etherPortSpeedCfg INTEGER
  etherPortSpeedStatus INTEGER
  etherPortDuplexCfg INTEGER
  etherPortLoopback INTEGER
  etherPortPhyReset INTEGER
  etherPortStatsTxPkts64Octets Counter
  etherPortStatsTxPkts65to127Octets Counter
  etherPortStatsTxPkts128to255Octets Counter
  etherPortStatsTxPkts256to511Octets Counter
  etherPortStatsTxPkts512to1023Octets Counter
  etherPortStatsTxPkts1024to1518Octets Counter
  etherPortStatsTxPkts1519to1530Octets Counter
  etherPortStatsTxFCSErrors Counter
  etherPortStatsTxOversize Counter
  etherPortStatsTxUndersize Counter
  etherPortStatsTxControlFrames Counter
  etherPortStatsTxBadFifoUnderrun Counter
  etherPortStatsTxBadFifoOverrun Counter
  etherPortStatsTxDropFifoOverrun Counter
  etherPortStatsTxBadParityError Counter
  etherPortStatsTxDropParityError Counter
  etherPortStatsTxBadSequenceError Counter
  etherPortStatsTxDropSequenceError Counter
  etherPortStatsTxBadJamError Counter
  etherPortStatsTxDropJamError Counter
  etherPortSpeedTrapEnable INTEGER
  etherPortDuplexTrapEnable INTEGER
  etherPortAutonegTrapEnable INTEGER
  etherPortRowStatus INTEGER
  etherPortAutonegAdvSpeed INTEGER
  etherPortAutonegAdvDuplex INTEGER
  etherPortPauseStateReceived INTEGER
  etherPortVlanMode INTEGER
  etherPortDefaultVlanId INTEGER
  etherPortRxOverrun Counter
  etherPortRxSyncErrors Counter
  etherPortRxDelSeqErrors Counter
  etherPortRxFifoOverrunErrors Counter
  etherPortRxControlFrames Counter
  etherPortRxThreshOvrszFrames Counter
  etherPortStatsRxPkts1519to1530Octets Counter

TdmIoDS1PortEntry  
SEQUENCE    
  tdmIoDS1PortType INTEGER
  tdmIoDS1PortTiming INTEGER
  tdmIoDS1PortBuildOut INTEGER
  tdmIoDS1PortFraming INTEGER
  tdmIoDS1PortCoding INTEGER
  tdmIoDS1PortLoopbackState INTEGER
  tdmIoDS1PortLoopbackType INTEGER
  tdmIoDS1PortLoopbackResults INTEGER
  tdmIoDS1PortLoopbackLLbActCode INTEGER
  tdmIoDS1PortLoopbackLLbDeactCode INTEGER
  tdmIoDS1PortLoopbackLlbActCodeLen INTEGER
  tdmIoDS1PortLoopbackLlbDeactCodeLen INTEGER
  tdmIoDS1PortLoopbackLlbControl INTEGER
  tdmIoDS1PortLoopbackLlbGenPath INTEGER
  tdmIoDS1PortLoopbackLlbMonPath INTEGER
  tdmIoDS1PortPrbsAlgorithm INTEGER
  tdmIoDS1PortPrbsInversion INTEGER
  tdmIoDS1PortPrbsGenPath INTEGER
  tdmIoDS1PortPrbsMonPath INTEGER
  tdmIoDS1PortPrbsMonitor INTEGER
  tdmIoDS1PortPrbsTransmit INTEGER
  tdmIoDS1PortPrbsBec Counter
  tdmIoDS1PortBertState INTEGER
  tdmIoDS1PortBertPattern INTEGER
  tdmIoDS1PortBertDuration INTEGER
  tdmIoDS1PortBertResults INTEGER
  tdmIoDS1PortLineESS15Min INTEGER
  tdmIoDS1PortPathESS15Min INTEGER
  tdmIoDS1PortLineESS1Day INTEGER
  tdmIoDS1PortPathESS1Day INTEGER
  tdmIoDS1PortPathCVS15Min INTEGER
  tdmIoDS1PortPathCVS1Day INTEGER
  tdmIoDS1PortPathSESS15Min INTEGER
  tdmIoDS1PortPathSESS1Day INTEGER
  tdmIoDS1PortPathSASS15Min INTEGER
  tdmIoDS1PortPathSASS1Day INTEGER
  tdmIoDS1PortPathCSS15Min INTEGER
  tdmIoDS1PortPathCSS1Day INTEGER
  tdmIoDS1PortPathUASS15Min INTEGER
  tdmIoDS1PortRowStatus INTEGER
  dsxStatus INTEGER
  tdmIoDS1PortLCVCount INTEGER

SonetPortEntry  
SEQUENCE    
  sonetPortType INTEGER
  sonetPortIdString OCTET STRING
  sonetPortTiming INTEGER
  sonetPortLoopback INTEGER
  sonetPortScrambling INTEGER
  sonetPortChannelization INTEGER
  sonetPortConfigedChans Unsigned32
  sonetPortSectESS15Min INTEGER
  sonetPortLineESS15Min INTEGER
  sonetPortPathESS15Min INTEGER
  sonetPortSectESS1Day INTEGER
  sonetPortLineESS1Day INTEGER
  sonetPortPathESS1Day INTEGER
  sonetPortSectCVS15Min INTEGER
  sonetPortLineCVS15Min INTEGER
  sonetPortPathCVS15Min INTEGER
  sonetPortSectCVS1Day INTEGER
  sonetPortLineCVS1Day INTEGER
  sonetPortPathCVS1Day INTEGER
  sonetPortSectSESS15Min INTEGER
  sonetPortLineSESS15Min INTEGER
  sonetPortPathSESS15Min INTEGER
  sonetPortSectSESS1Day INTEGER
  sonetPortLineSESS1Day INTEGER
  sonetPortPathSESS1Day INTEGER
  sonetPortLineUASS15Min INTEGER
  sonetPortPathUASS15Min INTEGER
  sonetPortLineUASS1Day INTEGER
  sonetPortPathUASS1Day INTEGER
  sonetPortRowStatus INTEGER
  sonetTCAStatus INTEGER

AtmPortEntry  
SEQUENCE    
  atmPortVPTunnel TruthValue
  atmPortMaxTotalBits INTEGER
  atmPortTiming INTEGER
  atmPortInCells Counter32
  atmPortOutCells Counter32
  atmPortCDVT INTEGER
  atmPortMaxActvBits OCTET STRING
  atmPortHCInCells Counter64
  atmPortHCOutCells Counter64
  atmPortRowStatus INTEGER

OpticalPortEntry  
SEQUENCE    
  lambda INTEGER
  opticalPortMode INTEGER
  opticalPortRxSMselect INTEGER
  opticalPortTxSMselect INTEGER
  opticalPortRxSignalState INTEGER
  opticalPortRxFrameState INTEGER
  opticalPortTxStatus INTEGER
  opticalPortTxEnable INTEGER
  opticalPortLaserPowerLevel INTEGER
  opticalPortLaserWavelength INTEGER
  opticalPortRowStatus INTEGER

RingPortEntry  
SEQUENCE    
  ringPortArbiterEnabled TruthValue
  ringPortFrameMode INTEGER
  ringPortMaxChannels INTEGER
  ringPortMaxSubChannels INTEGER
  ringPortAutoQueueSizing TruthValue
  ringPortRingMode INTEGER
  ringPortNodeId INTEGER
  ringPortAdminStatus INTEGER
  ringPortOperStatus INTEGER
  ringPortRxFrames Counter
  ringPortRxFrameErrors Counter
  ringPortTxFrames Counter
  ringPortMaxTDMChannels INTEGER
  ringPortK1K2Status INTEGER
  ringPortAISStatus INTEGER
  ringPortPHYStatus INTEGER

TdmIoDS3PortEntry  
SEQUENCE    
  tdmIoDS3PortPBitESS15Min INTEGER
  tdmIoDS3PortPBitESS1Day INTEGER
  tdmIoDS3PortPBitSESS15Min INTEGER
  tdmIoDS3PortPBitSESS1Day INTEGER
  tdmIoDS3PortSEFSS15Min INTEGER
  tdmIoDS3PortSEFSS1Day INTEGER
  tdmIoDS3PortUASS15Min INTEGER
  tdmIoDS3PortUASS1Day INTEGER
  tdmIoDS3PortLineCVS15Min INTEGER
  tdmIoDS3PortLineCVS1Day INTEGER
  tdmIoDS3PortPBitCVS15Min INTEGER
  tdmIoDS3PortPBitCVS1Day INTEGER
  tdmIoDS3PortLineESS15Min INTEGER
  tdmIoDS3PortLineESS1Day INTEGER
  tdmIoDS3PortCBitCVS15Min INTEGER
  tdmIoDS3PortCBitCVS1Day INTEGER
  tdmIoDS3PortCBitESS15Min INTEGER
  tdmIoDS3PortCBitESS1Day INTEGER
  tdmIoDS3PortCBitSESS15Min INTEGER
  tdmIoDS3PortCBitSESS1Day INTEGER
  tdmIoDS3PortRowStatus INTEGER

PosPortEntry  
SEQUENCE    
  posPortTransportSegmentCount Counter32
  posPortMode INTEGER
  posPortDefaultVID Unsigned32
  posPortMinPktSize INTEGER
  posPortMaxPktSize INTEGER
  posPortMinPktViolations Counter32
  posPortMaxPktViolations Counter32

Defined Values

portMIB 1.3.6.1.4.1.5812.3.1
The MIB module for cards in coriolis boxes
MODULE-IDENTITY    

portTable 1.3.6.1.4.1.5812.3.2
The port table. This contains the portNo variable, which is used as an index into specific port tables
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.5812.3.2.1
Entry containing the portNo variable
Status: current Access: not-accessible
OBJECT-TYPE    
  PortEntry  

portNo 1.3.6.1.4.1.5812.3.2.1.1
The purpose of this variable is to be used as index into tables
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..16  

mib2IfIndex 1.3.6.1.4.1.5812.3.2.1.2
This variable serves to identify the slot and port number.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

etherPortTable 1.3.6.1.4.1.5812.3.3
The ethernet port table. This table contains information about the ethernet ports in this device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtherPortEntry

etherPortEntry 1.3.6.1.4.1.5812.3.3.1
Entry containing information about ethernet ports
Status: current Access: not-accessible
OBJECT-TYPE    
  EtherPortEntry  

etherPortSpeedCfg 1.3.6.1.4.1.5812.3.3.1.1
The desired port speed if Autonegotiation is disabled. Management control of the port speed can also be accomplished through the MAU MIB via ifMauDefaultType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to configure the duplex mode of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER speed10(1), speed100(2), speed1000(3)  

etherPortSpeedStatus 1.3.6.1.4.1.5812.3.3.1.2
The speed of the port. If autoneg is enabled, this is determined by the results of the autoneg process. If autoneg is disabled, this is the same as IfAdminSpeed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER speed10(1), speed100(2), speed1000(3)  

etherPortDuplexCfg 1.3.6.1.4.1.5812.3.3.1.3
The desired duplex mode of operation of the MAC entity if Autonegotiation is disabled. Management control of the duplex mode can also be accomplished through the MAU MIB via ifMauDefaultType.Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to configure the duplex mode of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), half(2), full(3)  

etherPortLoopback 1.3.6.1.4.1.5812.3.3.1.4
Enables/disables loopback mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

etherPortPhyReset 1.3.6.1.4.1.5812.3.3.1.5
Ethernet port phy reset
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inReset(1), outOfReset(2)  

etherPortStatsTxPkts64Octets 1.3.6.1.4.1.5812.3.3.1.6
Total 64 byte packets transmitted on ethernet port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxPkts65to127Octets 1.3.6.1.4.1.5812.3.3.1.7
The total number of packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxPkts128to255Octets 1.3.6.1.4.1.5812.3.3.1.8
The total number of packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxPkts256to511Octets 1.3.6.1.4.1.5812.3.3.1.9
The total number of packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxPkts512to1023Octets 1.3.6.1.4.1.5812.3.3.1.10
The total number of packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxPkts1024to1518Octets 1.3.6.1.4.1.5812.3.3.1.11
The total number of packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxPkts1519to1530Octets 1.3.6.1.4.1.5812.3.3.1.12
The total number of packets (including bad packets) transmitted that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxFCSErrors 1.3.6.1.4.1.5812.3.3.1.13
Total packets transmitted on ethernet port with FCS errors (if MAC generates the FCS, this can never be incremented).
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxOversize 1.3.6.1.4.1.5812.3.3.1.14
Number of frames transmitted greater than 1518 bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxUndersize 1.3.6.1.4.1.5812.3.3.1.15
Number of packets less than 64 bytes transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxControlFrames 1.3.6.1.4.1.5812.3.3.1.16
Number of control frames transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxBadFifoUnderrun 1.3.6.1.4.1.5812.3.3.1.17
Number of bad frames (due to Transmit FIFO underrun) transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxBadFifoOverrun 1.3.6.1.4.1.5812.3.3.1.18
Number of bad frames (due to Transmit FIFO overrun) transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxDropFifoOverrun 1.3.6.1.4.1.5812.3.3.1.19
Number of frames dropped due to Transmit FIFO underrun.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxBadParityError 1.3.6.1.4.1.5812.3.3.1.20
Number of bad frames (due to parity error) transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxDropParityError 1.3.6.1.4.1.5812.3.3.1.21
Number of bad frames (due to parity error) dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxBadSequenceError 1.3.6.1.4.1.5812.3.3.1.22
Number of bad frames (due to frame Sequence Error) transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxDropSequenceError 1.3.6.1.4.1.5812.3.3.1.23
Number of bad frames (due to frame Sequence Error) dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxBadJamError 1.3.6.1.4.1.5812.3.3.1.24
Number of bad frames (due to Jam Bit Error) transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsTxDropJamError 1.3.6.1.4.1.5812.3.3.1.25
Number of bad frames (due to Jam Bit Error) dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortSpeedTrapEnable 1.3.6.1.4.1.5812.3.3.1.26
Indicates whether portSpeedTrap traps should be generated for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

etherPortDuplexTrapEnable 1.3.6.1.4.1.5812.3.3.1.27
Ethernet port duplex trap enable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

etherPortAutonegTrapEnable 1.3.6.1.4.1.5812.3.3.1.28
Indicates whether autoNegCompleteTrap traps should be generated for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

etherPortRowStatus 1.3.6.1.4.1.5812.3.3.1.29
This variable is used to create or delete instances of ethernet ports This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6)  

etherPortAutonegAdvSpeed 1.3.6.1.4.1.5812.3.3.1.30
This specifies what speed capability is advertised for autonegotiation. If 100 MBPS is set, then 10 MBPS is also advertised.This does not apply to Gig Ethernet Phys, since they do not autonegotiate speed or duplex.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER speed10(1), speed100(2), speed1000(3)  

etherPortAutonegAdvDuplex 1.3.6.1.4.1.5812.3.3.1.31
This specifies what duplex capability is advertised for autonegotiation. If Full Duplex is set, then Half Duplex is also adveetised.This does not apply to Gig Ethernet Phys, since they do not autonegotiate speed or duplex.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), half(2), full(3)  

etherPortPauseStateReceived 1.3.6.1.4.1.5812.3.3.1.32
The PAUSE mode received from the remote device, as read from the Auto Negotiation Partner Ability GMII Register of the PHY.If autoNegotiation is not enabled and completed, then this is set to undefined. This is used to determine the dot3PauseOperMode for the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noPause(1), enableTx(2), enableRx(3), enableTxRx(4), undefined(5)  

etherPortVlanMode 1.3.6.1.4.1.5812.3.3.1.33
Specifies the VLAN mode for the port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), stripVID(2), transparent(3)  

etherPortDefaultVlanId 1.3.6.1.4.1.5812.3.3.1.34
Specifies what the default Vlan Id is for the port. This is used on ingress only if vlanMode is Enabled and a frame is received either untagged or tagged with a VID not known to the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

etherPortRxOverrun 1.3.6.1.4.1.5812.3.3.1.35
The total number of packets dropped by the GMAC due to the occurence of a receive overrun (gig only- supported by GMAC-D2 and later)
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortRxSyncErrors 1.3.6.1.4.1.5812.3.3.1.36
The total number of packets dropped due to loss of sync during packet reception. (GIG only- supported by GMAC-D2 and later)
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortRxDelSeqErrors 1.3.6.1.4.1.5812.3.3.1.37
The total number of packets dropped due to delimiter sequence errors as detected by the GMAC during packet reception. (GIG only- supported by GMAC-D2 and later)
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortRxFifoOverrunErrors 1.3.6.1.4.1.5812.3.3.1.38
The total number of packets dropped by the GMAC due to the occurence of a receive FIFO overrun (gig only- supported by GMAC-D2 and later)
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortRxControlFrames 1.3.6.1.4.1.5812.3.3.1.39
Number of control frames received by this port
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortRxThreshOvrszFrames 1.3.6.1.4.1.5812.3.3.1.40
The total number of threshold oversized frames received by the GMAC (gig only - supported by GMAC-D2 and later)
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

etherPortStatsRxPkts1519to1530Octets 1.3.6.1.4.1.5812.3.3.1.41
The total number of packets (including bad packets) received that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

tdmIoDS1PortTable 1.3.6.1.4.1.5812.3.4
The DS1 TDM IO Port Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmIoDS1PortEntry

tdmIoDS1PortEntry 1.3.6.1.4.1.5812.3.4.1
Entry containing information about TDM IO DS1 ports
Status: current Access: not-accessible
OBJECT-TYPE    
  TdmIoDS1PortEntry  

tdmIoDS1PortType 1.3.6.1.4.1.5812.3.4.1.1
The type of TDM IO DS1 port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ds1(1)  

tdmIoDS1PortTiming 1.3.6.1.4.1.5812.3.4.1.2
Clock source for the DS1 port 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered re- ceive clock from another interface is used as the transmit clock.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loopTiming(1), localTiming(2), throughTiming(3)  

tdmIoDS1PortBuildOut 1.3.6.1.4.1.5812.3.4.1.5
Line Build Out for Signal Strength. For short haul, a distance (in feet) is chosen. For long haul, an attenuation strength is chosen in Decibels.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER shortHaulMax133Feet(1), shortHaulMax266Feet(2), shortHaulMax399Feet(3), shortHaulMax533Feet(4), shortHaulMax655Feet(5), longHaulZeroDB(6), longHaulSevenFiveDB(7), longHaulOneFiveDB(8), longHaulTwentyTwoDB(9)  

tdmIoDS1PortFraming 1.3.6.1.4.1.5812.3.4.1.6
Framing type implemented for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ds1unframed(1)  

tdmIoDS1PortCoding 1.3.6.1.4.1.5812.3.4.1.7
The type of Zero Code Suppression used on this interface. B8ZS refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density requirements, such as inverting HDLC data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(2), ami(5)  

tdmIoDS1PortLoopbackState 1.3.6.1.4.1.5812.3.4.1.8
This object indicates the state of loopback on this interface. 'Idle' indicates that there is no loopback running and 'running' indicates that this interface is in loopback mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), running(2)  

tdmIoDS1PortLoopbackType 1.3.6.1.4.1.5812.3.4.1.9
This object indicates the type of loopback on this interface. noLoop - the interface is not in loopBack mode. localOn - the interface is running in internal loop. digitalOn - the interface is running in internal loop. remoteOn - the interface is looping away external data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noLoop(1), localOn(8), digitalOn(9), remoteOn(10)  

tdmIoDS1PortLoopbackResults 1.3.6.1.4.1.5812.3.4.1.10
Results from previous loopback on this port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER failure(1), success(2)  

tdmIoDS1PortLoopbackLLbActCode 1.3.6.1.4.1.5812.3.4.1.11
User code to enable Automatic Remote Loopback(ARL)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tdmIoDS1PortLoopbackLLbDeactCode 1.3.6.1.4.1.5812.3.4.1.12
User code to disable Automatic Remote Loopback(ARL)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tdmIoDS1PortLoopbackLlbActCodeLen 1.3.6.1.4.1.5812.3.4.1.13
Length of user code to enable Automatic Remote Loopback(ARL)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up5Bit(1), up6Bit(2), up7Bit(3), up8Bit(4)  

tdmIoDS1PortLoopbackLlbDeactCodeLen 1.3.6.1.4.1.5812.3.4.1.14
Length of user code to disable Automatic Remote Loopback(ARL)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER down5Bit(1), down6Bit(2), down7Bit(3), down8Bit(4)  

tdmIoDS1PortLoopbackLlbControl 1.3.6.1.4.1.5812.3.4.1.15
LLBCODE(activate/deactivate) generation/monitoring control
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER genOff(1), genActOn(2), genDeActOn(3), monOff(4), monOn(5)  

tdmIoDS1PortLoopbackLlbGenPath 1.3.6.1.4.1.5812.3.4.1.16
The path (xmit/rcv) for LLBCODE generation
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER genRcv(1), genXmit(2)  

tdmIoDS1PortLoopbackLlbMonPath 1.3.6.1.4.1.5812.3.4.1.17
The path (xmit/rcv) for LLBCODE monitoring
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monRcv(1), monXmit(2)  

tdmIoDS1PortPrbsAlgorithm 1.3.6.1.4.1.5812.3.4.1.18
The PRBS Algorithm
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER algo215(1), algo220(2)  

tdmIoDS1PortPrbsInversion 1.3.6.1.4.1.5812.3.4.1.19
Whether the PRBS stream will be inverted
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

tdmIoDS1PortPrbsGenPath 1.3.6.1.4.1.5812.3.4.1.20
The PRBS generator path
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER genRcv(1), genXmit(2)  

tdmIoDS1PortPrbsMonPath 1.3.6.1.4.1.5812.3.4.1.21
The PRBS monitor path
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monRcv(1), monXmit(2)  

tdmIoDS1PortPrbsMonitor 1.3.6.1.4.1.5812.3.4.1.22
PRBS monitor - is it off or on?
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

tdmIoDS1PortPrbsTransmit 1.3.6.1.4.1.5812.3.4.1.23
PRBS or normal transmission on transmission line
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

tdmIoDS1PortPrbsBec 1.3.6.1.4.1.5812.3.4.1.24
The PRBS bit error counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

tdmIoDS1PortBertState 1.3.6.1.4.1.5812.3.4.1.25
User specified BERT status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), running(2), other(3)  

tdmIoDS1PortBertPattern 1.3.6.1.4.1.5812.3.4.1.26
User specified BERT type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pattern223(1), pattern220(2), patternQrss(3), pattern215(4), pattern211(5), patternAllZeros(6), patternAllOnes(7), patternAlternate(8)  

tdmIoDS1PortBertDuration 1.3.6.1.4.1.5812.3.4.1.27
User specified BERT duration
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oneMin(1), fiveMin(2), thirtyMin(3), oneHour(4), twelveHour(5), twentyfourHour(6)  

tdmIoDS1PortBertResults 1.3.6.1.4.1.5812.3.4.1.28
Results from previous BERT test on this port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER timeLeft(1), totalBitErrs(2), totalBits(3)  

tdmIoDS1PortLineESS15Min 1.3.6.1.4.1.5812.3.4.1.29
The 15 minute Line Errored Seconds Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS1PortPathESS15Min 1.3.6.1.4.1.5812.3.4.1.30
The 15 minute Path Errored Seconds Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS1PortLineESS1Day 1.3.6.1.4.1.5812.3.4.1.31
The 1 Day Line Errored Seconds Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS1PortPathESS1Day 1.3.6.1.4.1.5812.3.4.1.32
The 1 Day Path Errored Seconds Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS1PortPathCVS15Min 1.3.6.1.4.1.5812.3.4.1.33
The 15 minute Path Coding Violations Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16383  

tdmIoDS1PortPathCVS1Day 1.3.6.1.4.1.5812.3.4.1.34
The 1 day Path Coding Violations Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1048575  

tdmIoDS1PortPathSESS15Min 1.3.6.1.4.1.5812.3.4.1.35
The 15 minute Path Severely Errored Seconds Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS1PortPathSESS1Day 1.3.6.1.4.1.5812.3.4.1.36
The 1 day Path Severely Errored Seconds Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS1PortPathSASS15Min 1.3.6.1.4.1.5812.3.4.1.37
The 15 minute Path AIS seconds Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS1PortPathSASS1Day 1.3.6.1.4.1.5812.3.4.1.38
The 1 day Path AIS seconds Threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS1PortPathCSS15Min 1.3.6.1.4.1.5812.3.4.1.39
The 15 minute path controlled slip seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS1PortPathCSS1Day 1.3.6.1.4.1.5812.3.4.1.40
The 1 day path controlled slip seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS1PortPathUASS15Min 1.3.6.1.4.1.5812.3.4.1.41
The 15 minute path unavailable seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS1PortRowStatus 1.3.6.1.4.1.5812.3.4.1.42
This variable is used to create or delete instances of TDM IO DS1 ports. This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6)  

dsxStatus 1.3.6.1.4.1.5812.3.4.1.43
DSx line status.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER dsx-rcvrai-failure-declared(1), dsx-rcvrai-failure-cleared(2), dsx-xmitrai-failure-declared(3), dsx-xmitrai-failure-cleared(4), dsx-rcvais-failure-declared(5), dsx-rcvais-failure-cleared(6), dsx-xmitais-failure-declared(7), dsx-xmitais-failure-cleared(8), dsx-los-failure-declared(9), dsx-los-failure-cleared(10), dsx-lof-failure-declared(11), dsx-lof-failure-cleared(12), dsx-other-failure-declared(13), dsx-other-failure-cleared(14), dsx-uas-failure-declared(15), dsx-uas-failure-cleared(16), dsx-exz-failure-declared(17), dsx-exz-failure-cleared(18), dsx-pden-failure-declared(19), dsx-pden-failure-cleared(20)  

tdmIoDS1PortLCVCount 1.3.6.1.4.1.5812.3.4.1.44
Count of Line Code Violations.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sonetPortTable 1.3.6.1.4.1.5812.3.5
The proprietary SONET Port Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetPortEntry

sonetPortEntry 1.3.6.1.4.1.5812.3.5.1
Entry containing information about SONET ports
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetPortEntry  

sonetPortType 1.3.6.1.4.1.5812.3.5.1.1
The type of SONET port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oc12c(1), oc12sts1(2)  

sonetPortIdString 1.3.6.1.4.1.5812.3.5.1.2
The identifier string for the SONET port
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sonetPortTiming 1.3.6.1.4.1.5812.3.5.1.3
Clock source for the port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

sonetPortLoopback 1.3.6.1.4.1.5812.3.5.1.4
The types of loopback available on the SONET interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER slle(1), sdle(2), pdle(3), sllben(4), none(5)  

sonetPortScrambling 1.3.6.1.4.1.5812.3.5.1.5
Whether port scrambling is enabled or disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sonetPortChannelization 1.3.6.1.4.1.5812.3.5.1.6
Whether the physical port is concatenated or not
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER concatenated(1), nonConcatenated(2)  

sonetPortConfigedChans 1.3.6.1.4.1.5812.3.5.1.7
The channels configured on the port
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sonetPortSectESS15Min 1.3.6.1.4.1.5812.3.5.1.8
15 minute section errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

sonetPortLineESS15Min 1.3.6.1.4.1.5812.3.5.1.9
15 minute line errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

sonetPortPathESS15Min 1.3.6.1.4.1.5812.3.5.1.10
15 minute path errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

sonetPortSectESS1Day 1.3.6.1.4.1.5812.3.5.1.11
1 day section errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sonetPortLineESS1Day 1.3.6.1.4.1.5812.3.5.1.12
1 day line errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sonetPortPathESS1Day 1.3.6.1.4.1.5812.3.5.1.13
1 day path errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sonetPortSectCVS15Min 1.3.6.1.4.1.5812.3.5.1.14
15 minute section coding violations threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16383  

sonetPortLineCVS15Min 1.3.6.1.4.1.5812.3.5.1.15
15 minute line coding violations threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16383  

sonetPortPathCVS15Min 1.3.6.1.4.1.5812.3.5.1.16
15 minutes path coding violations threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16383  

sonetPortSectCVS1Day 1.3.6.1.4.1.5812.3.5.1.17
1 day section coding violations threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1048575  

sonetPortLineCVS1Day 1.3.6.1.4.1.5812.3.5.1.18
1 day line coding violations threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1048575  

sonetPortPathCVS1Day 1.3.6.1.4.1.5812.3.5.1.19
1 day path coding violations threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1048575  

sonetPortSectSESS15Min 1.3.6.1.4.1.5812.3.5.1.20
15 minutes section severely errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

sonetPortLineSESS15Min 1.3.6.1.4.1.5812.3.5.1.21
15 minutes line severely errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

sonetPortPathSESS15Min 1.3.6.1.4.1.5812.3.5.1.22
15 minutes path severely errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

sonetPortSectSESS1Day 1.3.6.1.4.1.5812.3.5.1.23
1 day section severely errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sonetPortLineSESS1Day 1.3.6.1.4.1.5812.3.5.1.24
1 day line severely errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sonetPortPathSESS1Day 1.3.6.1.4.1.5812.3.5.1.25
1 day path severely errored seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sonetPortLineUASS15Min 1.3.6.1.4.1.5812.3.5.1.26
15 minutes line unavailable seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

sonetPortPathUASS15Min 1.3.6.1.4.1.5812.3.5.1.27
15 minutes path unavailable seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

sonetPortLineUASS1Day 1.3.6.1.4.1.5812.3.5.1.28
1 day line unavailable seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sonetPortPathUASS1Day 1.3.6.1.4.1.5812.3.5.1.29
1 day path unavailable seconds threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sonetPortRowStatus 1.3.6.1.4.1.5812.3.5.1.30
This variable is used to create or delete instances of SONET ports This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6)  

sonetTCAStatus 1.3.6.1.4.1.5812.3.5.1.31
Represents the Threshold Crossing Alarm.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER sonet-section-cv-tca-declared(1), sonet-section-ses-tca-declared(2), sonet-section-es-tca-declared(3), sonet-line-cv-tca-declared(4), sonet-line-ses-tca-declared(5), sonet-line-es-tca-declared(6), sonet-line-uas-tca-declared(7), sonet-line-farend-cv-tca-declared(8), sonet-line-farend-ses-tca-declared(9), sonet-line-farend-es-tca-declared(10), sonet-line-farend-uas-tca-declared(11), sonet-path-cv-tca-declared(12), sonet-path-ses-tca-declared(13), sonet-path-es-tca-declared(14), sonet-path-uas-tca-declared(15), sonet-path-farend-cv-tca-declared(16), sonet-path-farend-ses-tca-declared(17), sonet-path-farend-es-tca-declared(18), sonet-path-farend-uas-tca-declared(19), sonet-vt-cv-tca-declared(20), sonet-vt-ses-tca-declared(21), sonet-vt-es-tca-declared(22), sonet-vt-uas-tca-declared(23), sonet-vt-farend-cv-tca-declared(24), sonet-vt-farend-ses-tca-declared(25), sonet-vt-farend-es-tca-declared(26), sonet-vt-farend-uas-tca-declared(27)  

atmPortTable 1.3.6.1.4.1.5812.3.6
The ATM Port Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmPortEntry

atmPortEntry 1.3.6.1.4.1.5812.3.6.1
Entry containing information about atm ports
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmPortEntry  

atmPortVPTunnel 1.3.6.1.4.1.5812.3.6.1.1
Whether this port is a VP Tunnel
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

atmPortMaxTotalBits 1.3.6.1.4.1.5812.3.6.1.2
Max Total Bits of VPI & VCI
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

atmPortTiming 1.3.6.1.4.1.5812.3.6.1.3
Timing Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), loop(2)  

atmPortInCells 1.3.6.1.4.1.5812.3.6.1.4
Input Cell Count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmPortOutCells 1.3.6.1.4.1.5812.3.6.1.5
Output Cell Count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmPortCDVT 1.3.6.1.4.1.5812.3.6.1.6
Cell Delay Variation Tolerance (CDVT) is measured in units of seconds per cell. For OC12c ATM the link rate is approximately 1.4 million cells per second, each cell time being approximately 700 nanoseconds. Its value is initialized to 50,000 which is approximately 0.7% of the OC12c line rate. The value ranges from 5,000 to 100,000 which gives us a CDVT range of 7 to 141 cell times.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5000..100000  

atmPortMaxActvBits 1.3.6.1.4.1.5812.3.6.1.7
Maximum active VPI/VCI bits
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

atmPortHCInCells 1.3.6.1.4.1.5812.3.6.1.8
64 bit input cell count
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atmPortHCOutCells 1.3.6.1.4.1.5812.3.6.1.9
64 bit output cell count
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atmPortRowStatus 1.3.6.1.4.1.5812.3.6.1.10
This variable is used to create or delete instances of atm ports This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6)  

opticalPortTable 1.3.6.1.4.1.5812.3.7
The Optical Port Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OpticalPortEntry

opticalPortEntry 1.3.6.1.4.1.5812.3.7.1
This describes the attributes of optical ports in the system
Status: current Access: not-accessible
OBJECT-TYPE    
  OpticalPortEntry  

lambda 1.3.6.1.4.1.5812.3.7.1.1
The purpose of this variable is to be used as the third component of the index into the optical port table
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

opticalPortMode 1.3.6.1.4.1.5812.3.7.1.2
The mode of operation of the port. This is set initially by the user and can only be changed by the user. It is not a status. By default, all optical ports in the system come up as working. They have to be explicitly configured to work in a protected mode or to be turned off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), working(2), protected(3)  

opticalPortRxSMselect 1.3.6.1.4.1.5812.3.7.1.3
This object selects which lambda to send over the back-plane to the different switch module.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER primary(1), reserve(2), both(3), none(4)  

opticalPortTxSMselect 1.3.6.1.4.1.5812.3.7.1.4
Selects between lambda feeds on the back plane wich originate in different switch module.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), reserve(2)  

opticalPortRxSignalState 1.3.6.1.4.1.5812.3.7.1.5
Provides the status of the received optical signal - whether it is detected or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER detected(1), lossOfSignal(2)  

opticalPortRxFrameState 1.3.6.1.4.1.5812.3.7.1.6
Frame state of signal as detected by SW at SONET framer. This state is auto set by software.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lossOfFrame(1), detected(2)  

opticalPortTxStatus 1.3.6.1.4.1.5812.3.7.1.7
Provides the status of the transmitter for the optical port. This provides the operational condition of the transmitter. The value of it could be 'Good' even though it is not transmitting any signal due to some reason.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(1), bad(2)  

opticalPortTxEnable 1.3.6.1.4.1.5812.3.7.1.8
Whether the transmission of data and interrupts on the optical port is enabled or disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

opticalPortLaserPowerLevel 1.3.6.1.4.1.5812.3.7.1.9
The laser power level on the port - this variable is useful for tunable lasers. Currently will return a value of high(1)
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER high(1), low(2)  

opticalPortLaserWavelength 1.3.6.1.4.1.5812.3.7.1.10
Laser wavelength on the optical port. Currently will return 1 for DWDM ports, 2 for 1310 ports, 3 for 1550 ports and 4 for ports that support both 1310 and 1550 nm wavelengths. This value however will be overshadowed by a 1310 or 1550 wavelength card present in that system. The list will be expanded later to give the exact 15xx wavelength. Useful for tunable lasers to control the 15xx wavelength
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fifteenXX(1), thirteenTen(2), fifteenFifty(3), thirteenTenFifteenFifty(4)  

opticalPortRowStatus 1.3.6.1.4.1.5812.3.7.1.11
This variable is used to create or delete instances of optical port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createAndGo(4), destroy(6)  

ringPortTable 1.3.6.1.4.1.5812.3.8
A table containing ring port variables.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RingPortEntry

ringPortEntry 1.3.6.1.4.1.5812.3.8.1
Entry in the table for a single ring port.
Status: current Access: not-accessible
OBJECT-TYPE    
  RingPortEntry  

ringPortArbiterEnabled 1.3.6.1.4.1.5812.3.8.1.1
The arbiter enabled Boolean defines whether the ring port Arbitration Logic is enabled or not. The Arbitration Logic services requests for extra data columns from an elastic bandwidth pool.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ringPortFrameMode 1.3.6.1.4.1.5812.3.8.1.2
The frame mode defines the data path mode of the ring port. The choices include AXSON and POS. AXSON frame mode means the ring encapsulates data inside AXSON frames, and POS means data is encapsulated using the Packet over SONET standard HDLC mechanism.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER axson(1), pos(2)  

ringPortMaxChannels 1.3.6.1.4.1.5812.3.8.1.3
The max channels parameter sizes the number of AxSON channels supported on the ring port. This determines number of ingress and egress queues and the amount of queue memory available.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

ringPortMaxSubChannels 1.3.6.1.4.1.5812.3.8.1.4
The max sub-channels parameter sizes the number of AxSON sub-channels supported in a particular AxSON channel. This determines the amount of queue memory required.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

ringPortAutoQueueSizing 1.3.6.1.4.1.5812.3.8.1.5
Defines whether Axson channel queues may be automatically resized during provisioning.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ringPortRingMode 1.3.6.1.4.1.5812.3.8.1.6
Whether the ring port is connected to the working ring or the protected ring
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER working(1), protected(2)  

ringPortNodeId 1.3.6.1.4.1.5812.3.8.1.7
This defines the temporal discovery of the node in the logical ring
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

ringPortAdminStatus 1.3.6.1.4.1.5812.3.8.1.8
Gives the possible ringPort Administration Status .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), redundant(3), diagnostic(4)  

ringPortOperStatus 1.3.6.1.4.1.5812.3.8.1.9
Gives the ringPortNodeId operational status of the AXSON interface .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

ringPortRxFrames 1.3.6.1.4.1.5812.3.8.1.10
This object sepcifies the number of frames received at this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

ringPortRxFrameErrors 1.3.6.1.4.1.5812.3.8.1.11
Number of errored frames received at this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

ringPortTxFrames 1.3.6.1.4.1.5812.3.8.1.12
This object sepcifies the number of frames transmitted from this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

ringPortMaxTDMChannels 1.3.6.1.4.1.5812.3.8.1.13
The maximum number of TDM channels supported on the ring
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..499  

ringPortK1K2Status 1.3.6.1.4.1.5812.3.8.1.14
The status indicated by the K1,K2 bytes in the SONET frame overhead
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER set(1), clear(2)  

ringPortAISStatus 1.3.6.1.4.1.5812.3.8.1.15
The status indicated by the AIS bytes in the SONET frame overhead
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER set(1), clear(2)  

ringPortPHYStatus 1.3.6.1.4.1.5812.3.8.1.16
The physical status of the ring port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER up(1), down(2), lower-layer-down(3), unknown(4)  

tdmIoDS3PortTable 1.3.6.1.4.1.5812.3.9
The DS3 TDM IO Port Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmIoDS3PortEntry

tdmIoDS3PortEntry 1.3.6.1.4.1.5812.3.9.1
Entry containing information about TDM IO DS3 ports
Status: current Access: not-accessible
OBJECT-TYPE    
  TdmIoDS3PortEntry  

tdmIoDS3PortPBitESS15Min 1.3.6.1.4.1.5812.3.9.1.1
15 minute threshold for P-Bit Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS3PortPBitESS1Day 1.3.6.1.4.1.5812.3.9.1.2
1 day threshold for P-Bit Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS3PortPBitSESS15Min 1.3.6.1.4.1.5812.3.9.1.3
15 minute threshold for P-Bit Severely Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS3PortPBitSESS1Day 1.3.6.1.4.1.5812.3.9.1.4
1 day threshold for P-Bit Severely Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS3PortSEFSS15Min 1.3.6.1.4.1.5812.3.9.1.5
15 minute threshold for Severely Errored Framing Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS3PortSEFSS1Day 1.3.6.1.4.1.5812.3.9.1.6
1 day threshold for Severely Errored Framing Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS3PortUASS15Min 1.3.6.1.4.1.5812.3.9.1.7
15 minute threshold for Severely Errored Framing Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS3PortUASS1Day 1.3.6.1.4.1.5812.3.9.1.8
1 day threshold for Unavailable Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS3PortLineCVS15Min 1.3.6.1.4.1.5812.3.9.1.9
15 minute threshold for Line-Coding Violations
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16383  

tdmIoDS3PortLineCVS1Day 1.3.6.1.4.1.5812.3.9.1.10
1 day threshold for Line-Coding Violations
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1048575  

tdmIoDS3PortPBitCVS15Min 1.3.6.1.4.1.5812.3.9.1.11
15 minute threshold for P-Bit Coding Violations
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16383  

tdmIoDS3PortPBitCVS1Day 1.3.6.1.4.1.5812.3.9.1.12
1 day threshold for P-Bit Coding Violations
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1048575  

tdmIoDS3PortLineESS15Min 1.3.6.1.4.1.5812.3.9.1.13
15 minute threshold for Line Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS3PortLineESS1Day 1.3.6.1.4.1.5812.3.9.1.14
1 day threshold for Line Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS3PortCBitCVS15Min 1.3.6.1.4.1.5812.3.9.1.15
15 minute threshold for C-Bit Coding Violations
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16383  

tdmIoDS3PortCBitCVS1Day 1.3.6.1.4.1.5812.3.9.1.16
1 day threshold for C-Bit Coding Violations
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1048575  

tdmIoDS3PortCBitESS15Min 1.3.6.1.4.1.5812.3.9.1.17
15 minute threshold for C-Bit Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS3PortCBitESS1Day 1.3.6.1.4.1.5812.3.9.1.18
1 day threshold for C-Bit Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS3PortCBitSESS15Min 1.3.6.1.4.1.5812.3.9.1.19
15 minute threshold for C-Bit Severely Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

tdmIoDS3PortCBitSESS1Day 1.3.6.1.4.1.5812.3.9.1.20
1 day threshold for C-Bit Severely Errored Seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

tdmIoDS3PortRowStatus 1.3.6.1.4.1.5812.3.9.1.21
This variable is used to create or delete instances of TDM IO DS3 ports. This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6)  

posPortTable 1.3.6.1.4.1.5812.3.10
The POS Port Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PosPortEntry

posPortEntry 1.3.6.1.4.1.5812.3.10.1
Entry containing information about POS ports
Status: current Access: not-accessible
OBJECT-TYPE    
  PosPortEntry  

posPortTransportSegmentCount 1.3.6.1.4.1.5812.3.10.1.1
Number of provisioned connections on port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

posPortMode 1.3.6.1.4.1.5812.3.10.1.2
mode of operation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER transparent(1), bridgedDataMode(2), vlan(3), macAddr(4), ipAddr(5), mpls(6), mapOS(7)  

posPortDefaultVID 1.3.6.1.4.1.5812.3.10.1.3
Port's default VLAN ID.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

posPortMinPktSize 1.3.6.1.4.1.5812.3.10.1.4
It is defined as the minimum number of bytes encapsulated in the POS frame including the FCS, but excluding byte stuffing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 4..4096  

posPortMaxPktSize 1.3.6.1.4.1.5812.3.10.1.5
It is defined as the maximum number of bytes encapsulated in the POS frame including the FCS, but excluding byte stuffing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 4..4096  

posPortMinPktViolations 1.3.6.1.4.1.5812.3.10.1.6
This object gives the number of times the system had detected a packet of size less than the acceptable minimum.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

posPortMaxPktViolations 1.3.6.1.4.1.5812.3.10.1.7
This object gives the number of times the system had detected a packet of size greater than the acceptable minimum.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portPhyStatusChange 0
Change in the operational status of a port, 1 means the port came up, 2 means it went down
TRAP-TYPE    

portAdminStatusChange 1
Change in the admin status of a port, 1 means the port came up, 2 means it went down
TRAP-TYPE    

portSpeedStatusTrap 20
Change in speed of an interface e.g. 10 or 100 for a Fast Ethernet port
TRAP-TYPE    

etherPortDuplexStatusTrap 21
Change in the duplex status of an ethernet port , 2 means half-duplex, 3 means full duplex
TRAP-TYPE    

etherPortAutonegStatusTrap 22
Change in status of the autoneg process, 3 means it has completed
TRAP-TYPE    

sonetSectionLOSChange 27
Change in the SONET LOS status.
TRAP-TYPE    

sonetSectionLOFChange 28
Change in the SONET LOF status.
TRAP-TYPE    

sonetLineAISChange 29
Change in the SONET Line AIS status.
TRAP-TYPE    

sonetLineRDIChange 30
Change in the SONET Line RDI status.
TRAP-TYPE    

sonetPathLOPChange 31
Change in the SONET Path LOP status.
TRAP-TYPE    

sonetPathAISChange 32
Change in the SONET Path AIS status.
TRAP-TYPE    

sonetPathRDIChange 33
Change in the SONET Path RDI status.
TRAP-TYPE    

sonetPathUNEQPChange 34
Indicates whether the SONET path is equipped or not.
TRAP-TYPE    

sonetPathPSLMChange 35
Indicates if there is any mismatch in the SONET signal label.
TRAP-TYPE    

sonetVTLOPChange 36
Change in the SONET VT LOP status.
TRAP-TYPE    

sonetVTAISChange 37
Change in the SONET VT AIS status.
TRAP-TYPE    

sonetVTRDIChange 38
Change in the SONET VT RDI status.
TRAP-TYPE    

sonetVTRFIChange 39
Change in the SONET VT RFI status.
TRAP-TYPE    

sonetVTUNEQPChange 40
Indicates whether the SONET VT is equipped or not.
TRAP-TYPE    

sonetVTPSLMChange 41
Indicates if there is any mismatch in the SONET signal label.
TRAP-TYPE    

ringPortK1K2Change 47
Indicates the change in status indicated by K1,K2 bytes
TRAP-TYPE    

ringPortAISChange 48
A signal indicating a change of status indicated by the AIS bytes
TRAP-TYPE    

ringPortPHYChange 49
A trap indicating the change in phy status of ring port
TRAP-TYPE    

sonetPortTCAlarm 50
A SONET alarm threshold has been crossed.
TRAP-TYPE    

dsxAlarm 55
The status of a DSx line has changed.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor