PKTC-ES-TAP-MIB
File:
PKTC-ES-TAP-MIB.mib (23495 bytes)
Imported modules
Imported symbols
Defined Types
PktcEScTapDscp |
|
An integer that is in the range of the DiffServ codepoint
values. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
0..63 |
|
PktcEScTapStreamEntry |
|
SEQUENCE |
|
|
|
|
pktcEScTapStreamIndex |
Integer32 |
|
|
pktcEScTapStreamType |
INTEGER |
|
|
pktcEScTapStreamInterceptEnable |
TruthValue |
|
|
pktcEScTapStreamInterceptedPackets |
Counter32 |
|
|
pktcEScTapStreamInterceptDrops |
Counter32 |
|
|
pktcEScTapStreamStatus |
RowStatus |
|
PktcEScTapDebugEntry |
|
SEQUENCE |
|
|
|
|
pktcEScTapDebugIndex |
Integer32 |
|
|
pktcEScTapDebugMediationId |
Unsigned32 |
|
|
pktcEScTapDebugStreamId |
Unsigned32 |
|
|
pktcEScTapDebugMessage |
SnmpAdminString |
|
|
pktcEScTapDebugStatus |
RowStatus |
|
Defined Values
pktcESTapMib |
1.3.6.1.4.1.4491.2.2.9.1.1 |
This module manages intercept feature.
This MIB defines a generic stream table that contains
fields common to all intercept types. Specific
intercept
filters are defined in extension MIBs, e.g., the
IP-TAP-MIB for IP intercepts. |
MODULE-IDENTITY |
|
|
|
pktcEScTapMediationContentId |
1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.1 |
pktcEScTapMediationContentId is a session identifier, from the
intercept application's perspective, and a content identifier
from the Mediation Device's perspective. The Mediation Device
is responsible for making sure these are unique, although the
SNMP RowStatus row creation process will help by not allowing
it to create conflicting entries. Before creating a new entry,
a value for this variable may be obtained by reading
pktcEScTapMediationNewIndex to reduce the probability of a
value
collision. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
pktcEScTapStreamTable |
1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1 |
The Intercept Stream Table lists the traffic streams to be
intercepted. The same data stream may be required by multiple
taps, and one might assume that often the intercepted stream
is a small subset of the traffic that could be intercepted.
The Table consists of generic fields that are independent
of the type of intercept. It contains type of the specific
filter which is defined in an extension MIB and counters to
account for packets intercepted or dropped by the attached
filter specification.
Note that the Mediation Device must make sure there is
only one type of specific filter created with the same
indices as that of a row in this table, otherwise the
later creations will fail. For example, if there is a
row in this table with index 1.2, there can be a
corresponding row with the same index either in
tapStreamTable, c8tapStreamTable or cuctTapStreamTable,
but not all.
The first index indicates which Mediation Device the
intercepted traffic will be diverted to. The second index
permits multiple classifiers to be used together.
Entries are added to this table via pktcEScTapStreamStatus in
accordance with the RowStatus convention. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PktcEScTapStreamEntry |
|
pktcEScTapStreamEntry |
1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1 |
A stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface, and many
application interfaces are supported. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PktcEScTapStreamEntry |
|
|
pktcEScTapStreamIndex |
1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.1 |
The index of the stream itself. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
pktcEScTapStreamType |
1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.2 |
Identifies the type of intercept filter associated to this
generic stream. The following type of streams is supported:
ip: The specific filter is an IP filter
with same indices as that of this
table. The exact filter is a row in
tapStreamTable of IP-TAP-MIB. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ip(1), mac(2), userConnection(3), msPdsn(4) |
|
pktcEScTapStreamInterceptEnable |
1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.3 |
If 'true', the tap should intercept matching traffic. The
value for this object should be set to 'true' only after an
additional filter specification has been attached to this
stream. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
pktcEScTapStreamInterceptedPackets |
1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.4 |
The number of packets matching this data stream specification
that have been intercepted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
pktcEScTapStreamInterceptDrops |
1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.5 |
The number of packets matching this data stream specification
that, having been intercepted, were dropped in the lawful
intercept process. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
pktcEScTapStreamStatus |
1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.6 |
The status of this conceptual row. This object manages
creation, modification, and deletion of rows in this table.
pktcEScTapStreamInterceptEnable may be modified even the
value of this entry rowStatus object is 'active'. When other
rows must be changed, pktcEScTapStreamStatus must be first set
to 'notInService'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
pktcEScTapDebugAge |
1.3.6.1.4.1.4491.2.2.9.1.1.1.3.1 |
This object contains the duration in minutes for which an
entry in pktcEScTapDebugTable is maintained by the implementing
device after which the entry is deleted. The management
station also has the option of deleting the entry itself
by setting pktcEScTapDebugStatus. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
pktcEScTapDebugMaxEntries |
1.3.6.1.4.1.4491.2.2.9.1.1.1.3.2 |
This object contains the maximum number of debug messages
maintained by the implementing device at a time. If this
limit is crossed, most recent message will replace the
least recent message. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
pktcEScTapDebugTable |
1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3 |
A table that contains Lawful Intercept debug messages
generated by the implementing device. This table is used
by pktcESTapMediationDebug and pktcESTapStreamDebug
notifications.
An entry in this table contains a debug message which is
regarding either a Mediation Device or a intercept stream
created by a Mediation Device. The Mediation device is
identified by pktcEScTapDebugMediationId whose value is
that of pktcEScTapMediationContentId of
pktcEScTapMediationEntry.
The stream is identified by pktcEScTapDebugMediationId and
pktcEScTapDebugStreamId whose values are that of
pktcEScTapMediationContentId and pktcEScTapStreamIndex of
the corresponding pktcEScTapStreamEntry.
Note that pktcEScTapDebugStreamId may be zero for an entry,
in which case the debug message is regarding a Mediation
Device.
Entries are added to this table via pktcEScTapDebugStatus in
accordance with the RowStatus convention. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PktcEScTapDebugEntry |
|
pktcEScTapDebugEntry |
1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1 |
A list of the debug messages. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PktcEScTapDebugEntry |
|
|
pktcEScTapDebugIndex |
1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1.1 |
Index to the debug table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
pktcEScTapDebugStreamId |
1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1.3 |
The value of this object is that of pktcEScTapStreamIndex of
an
entry in pktcEScTapStreamTable. This object along with
pktcEScTapDebugMediationId identifies an entry in
pktcEScTapStreamTable.
The value of this object may be zero, in which this debug
message is regarding a Mediation Device, but not a particular
stream. Note this object may contain a value for which an
entry in pktcEScTapMediationTable does not exist. This happens
when creation of an entry in pktcEScTapStreamTable fails. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
pktcEScTapDebugStatus |
1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1.5 |
The status of this conceptual row. A row in this table is
created by the implementing device. A management station cannot
modify any of the objects in this row, except deleting the row
by setting this object to 'destroy'. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
pktcESTapMibActive |
1.3.6.1.4.1.4491.2.2.9.1.1.0.1 |
This Notification is sent when an intercepting router or
switch is first capable of intercepting a packet corresponding
to a configured data stream. The value of the corresponding
pktcEScTapStreamType which identifies the actual intercept
stream type is included in this notification.
This notification may be generated in conjunction with the
intercept application, which is designed to expect the
notification to be sent as reliably as possible, e.g., through
the use of a finite number of retransmissions until
acknowledged, as and when such mechanisms are available; for
example, with SNMPv3, this would be an InformRequest. Filter
installation can take a long period of time, during which call
progress may be delayed. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
pktcESTapStreamDebug |
1.3.6.1.4.1.4491.2.2.9.1.1.0.4 |
When there is intervention needed due to some events related
to entries configured in pktcEScTapStreamTable, the device
notifies the manager of the event.
This notification may be generated in conjunction with the
intercept application, which is designed to expect the
notification to be sent as reliably as possible, e.g., through
the use of a finite number of retransmissions until
acknowledged, as and when such mechanisms are available; for
example, with SNMPv3, this would be an InformRequest. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
pktcESTapSwitchover |
1.3.6.1.4.1.4491.2.2.9.1.1.0.5 |
This notification is sent when there is a redundant (standby)
route processor available on the intercepting device and the
current active processor is going down causing standby to
takeover. Note that this notification may be sent by the
intercepting device only when it had a chance to know before it
goes down.
Mediation device when received this notification should assume
that configured intercepts on the intercepting device no longer
exist, when the standby processor takes control. This means
that
the Mediation device should again configure the intercepts. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
pktcESTapMibCompliance |
1.3.6.1.4.1.4491.2.2.9.1.1.2.1.1 |
The compliance statement for entities which implement the
Intercept MIB |
Status: current |
Access: read-write |
MODULE-COMPLIANCE |
|
|
|
pktcESTapStreamComplianceGroup |
1.3.6.1.4.1.4491.2.2.9.1.1.2.2.2 |
These objects are necessary for a description of the packets
to select for interception. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
pktcESTapNotificationGroup |
1.3.6.1.4.1.4491.2.2.9.1.1.2.2.3 |
These notifications are used to present status from the
intercepting device to the Mediation Device. |
Status: current |
Access: read-write |
NOTIFICATION-GROUP |
|
|
|
pktcESTapDebugComplianceGroup |
1.3.6.1.4.1.4491.2.2.9.1.1.2.2.5 |
These objects are necessary for debug information. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|