PDN-SCMEXT-MIB

File: PDN-SCMEXT-MIB.mib (7963 bytes)

Imported modules

SNMPv2-TC RFC-1212 PDN-HEADER-MIB

Imported symbols

RowStatus OBJECT-TYPE pdnAtm

Defined Types

DevAtmMaxVciVpiConfigEntry  
SEQUENCE    
  devAtmMaxIfIndex INTEGER
  devAtmMaxVpi INTEGER
  devAtmMaxVci INTEGER
  devAtmMaxVciVpiRowStatus RowStatus

DevAtmAutoConfigXconEntry  
SEQUENCE    
  devAtmAutoConfigXconChannel INTEGER
  devAtmAutoConfigXconIfIndex INTEGER
  devAtmAutoConfigXconVpi INTEGER
  devAtmAutoConfigXconVci INTEGER
  devAtmAutoConfigXconTraffic INTEGER
  devAtmAutoConfigXconRowStatus RowStatus

Defined Values

devAtmScm 1.3.6.1.4.1.1795.2.24.2.6.11.4
OBJECT IDENTIFIER    

devAtmMaxVciVpiConfig 1.3.6.1.4.1.1795.2.24.2.6.11.4.1
OBJECT IDENTIFIER    

devAtmMaxVciVpiConfigTable 1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1
The Paradyne MaxVciVpi-MIB Table .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DevAtmMaxVciVpiConfigEntry

devAtmMaxVciVpiConfigEntry 1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1
An entry in the Paradyne MaxVciVpi-MIB Interface Config Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DevAtmMaxVciVpiConfigEntry  

devAtmMaxIfIndex 1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1.1
The index value which uniquely identifies the interface for which this entry contains information on interface tests. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

devAtmMaxVpi 1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1.2
This object is used to specify the vpi of interest.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

devAtmMaxVci 1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1.3
This object is used to specify the maximum number of vci's that will be allowed for the corresponding vpi.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

devAtmMaxVciVpiRowStatus 1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1.4
This object is used to create a new row or modify or delete an existing row in this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

devAtmAutoConfigXcon 1.3.6.1.4.1.1795.2.24.2.6.11.4.2
OBJECT IDENTIFIER    

devAtmAutoConfigXconTable 1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1
The Paradyne AutoConfigXcon-MIB Table .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DevAtmAutoConfigXconEntry

devAtmAutoConfigXconEntry 1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1
An entry in the Paradyne AutoConfigXcon-MIB Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DevAtmAutoConfigXconEntry  

devAtmAutoConfigXconChannel 1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.1
The index value which uniquely identifies the row in this table as being a unique range of cross connects being automatically generated for the ifindex-devAtmAutoConfigXconIfIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

devAtmAutoConfigXconIfIndex 1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.2
The index value which uniquely identifies the interface for which this entry contains information on interface tests. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

devAtmAutoConfigXconVpi 1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.3
This object is used to specify the vpi part of the vpi/vci
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

devAtmAutoConfigXconVci 1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.4
This object is used to specify the starting vci value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

devAtmAutoConfigXconTraffic 1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.5
This object is used to specify the class of service that this connection will be having.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

devAtmAutoConfigXconRowStatus 1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.6
This object is used to create a new row or modify or delete an existing row in this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus