PDN-HDSL2-SHDSL-LINE-MIB

File: PDN-HDSL2-SHDSL-LINE-MIB.mib (56573 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
SNMP-FRAMEWORK-MIB	IF-MIB	PerfHist-TC-MIB
HDSL2-SHDSL-LINE-MIB	PDN-HEADER-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Unsigned32	Counter32	Integer32
OBJECT-GROUP	NOTIFICATION-GROUP	MODULE-COMPLIANCE
TEXTUAL-CONVENTION	SnmpAdminString	ifIndex
PerfCurrentCount	PerfIntervalCount	Hdsl2ShdslPerfTimeElapsed
Hdsl2ShdslPerfCurrDayCount	Hdsl2Shdsl1DayIntervalCount	hdsl2ShdslInvIndex
hdsl2ShdslEndpointSide	hdsl2ShdslEndpointThreshLoopAttenuation	hdsl2ShdslEndpointThreshSNRMargin
hdsl2ShdslEndpointThreshES	hdsl2ShdslEndpointThreshSES	hdsl2ShdslEndpointThreshCRCanomalies
hdsl2ShdslEndpointThreshLOSWS	hdsl2ShdslEndpointThreshUAS	hdsl2ShdslSpanConfProfileName
pdn-interfaces

Defined Types

PdnHdsl2ShdslWirePair
This is the referenced pair of wires in a DSL Segment. HDSL2 only supports a single pair (wirePair1), while SHDSL supports an optional second pair (wirePair2), third pair (wirePair3), and a forth pair (wirePair4).
TEXTUAL-CONVENTION
	INTEGER	wirePair1(1), wirePair2(2), wirePair3(3), wirePair4(4)

PdnHdsl2ShdslSpanStatusExtEntry
SEQUENCE
	pdnHdsl2ShdslStatusMaxAttainableLineRate	Unsigned32
	pdnHdsl2ShdslStatusActualLineRate	Unsigned32

PdnHdsl2ShdslEndpointConfEntry
SEQUENCE
	pdnHdsl2ShdslEndpointWirePair	PdnHdsl2ShdslWirePair
	pdnHdsl2ShdslEndpointAlarmConfProfile	SnmpAdminString

PdnHdsl2ShdslEndpointCurrEntry
SEQUENCE
	pdnHdsl2ShdslEndpointCurrAtn	Integer32
	pdnHdsl2ShdslEndpointCurrSnrMgn	Integer32
	pdnHdsl2ShdslEndpointCurrStatus	BITS
	pdnHdsl2ShdslEndpointES	Counter32
	pdnHdsl2ShdslEndpointSES	Counter32
	pdnHdsl2ShdslEndpointCRCanomalies	Counter32
	pdnHdsl2ShdslEndpointLOSWS	Counter32
	pdnHdsl2ShdslEndpointUAS	Counter32
	pdnHdsl2ShdslEndpointCurr15MinTimeElapsed	Hdsl2ShdslPerfTimeElapsed
	pdnHdsl2ShdslEndpointCurr15MinES	PerfCurrentCount
	pdnHdsl2ShdslEndpointCurr15MinSES	PerfCurrentCount
	pdnHdsl2ShdslEndpointCurr15MinCRCanomalies	PerfCurrentCount
	pdnHdsl2ShdslEndpointCurr15MinLOSWS	PerfCurrentCount
	pdnHdsl2ShdslEndpointCurr15MinUAS	PerfCurrentCount
	pdnHdsl2ShdslEndpointCurr1DayTimeElapsed	Hdsl2ShdslPerfTimeElapsed
	pdnHdsl2ShdslEndpointCurr1DayES	Hdsl2ShdslPerfCurrDayCount
	pdnHdsl2ShdslEndpointCurr1DaySES	Hdsl2ShdslPerfCurrDayCount
	pdnHdsl2ShdslEndpointCurr1DayCRCanomalies	Hdsl2ShdslPerfCurrDayCount
	pdnHdsl2ShdslEndpointCurr1DayLOSWS	Hdsl2ShdslPerfCurrDayCount
	pdnHdsl2ShdslEndpointCurr1DayUAS	Hdsl2ShdslPerfCurrDayCount

PdnHdsl2Shdsl15MinIntervalEntry
SEQUENCE
	pdnHdsl2Shdsl15MinIntervalNumber	Unsigned32
	pdnHdsl2Shdsl15MinIntervalES	PerfIntervalCount
	pdnHdsl2Shdsl15MinIntervalSES	PerfIntervalCount
	pdnHdsl2Shdsl15MinIntervalCRCanomalies	PerfIntervalCount
	pdnHdsl2Shdsl15MinIntervalLOSWS	PerfIntervalCount
	pdnHdsl2Shdsl15MinIntervalUAS	PerfIntervalCount

PdnHdsl2Shdsl1DayIntervalEntry
SEQUENCE
	pdnHdsl2Shdsl1DayIntervalNumber	Unsigned32
	pdnHdsl2Shdsl1DayIntervalMoniSecs	Hdsl2ShdslPerfTimeElapsed
	pdnHdsl2Shdsl1DayIntervalES	Hdsl2Shdsl1DayIntervalCount
	pdnHdsl2Shdsl1DayIntervalSES	Hdsl2Shdsl1DayIntervalCount
	pdnHdsl2Shdsl1DayIntervalCRCanomalies	Hdsl2Shdsl1DayIntervalCount
	pdnHdsl2Shdsl1DayIntervalLOSWS	Hdsl2Shdsl1DayIntervalCount
	pdnHdsl2Shdsl1DayIntervalUAS	Hdsl2Shdsl1DayIntervalCount

PdnHdsl2ShdslSpanConfProfileExtEntry
SEQUENCE
	pdnHdsl2ShdslSpanConfWireInterface	INTEGER
	pdnHdsl2ShdslSpanConfMinLineRate	Unsigned32
	pdnHdsl2ShdslSpanConfMaxLineRate	Unsigned32

PdnHdsl2ShdslIfEntry
SEQUENCE
	pdnHdsl2ShdslIfTableEquipMode	INTEGER

Defined Values

pdnHdsl2ShdslLineMIB		1.3.6.1.4.1.1795.2.24.2.6.23
The primary purpose of this MIB is to allow support of G.shdsl.bis based on the ITU Temporary Document, DC-R15, April 2003, until such a time as the `standard' MIB, HDSL2-SHDSL-LINE-MIB, RFC 3276, May 2002 is updated to support G.shdsl.bis. In addition to providing support for G.shdsl.bis, this MIB may support SHDSL objects that are unique to the enterprise. Decisions as far as how this MIB is supported with respect to the `standard' MIB will be made in an individual basis by those involved with specific projects; those decisions are not dictated here. The following documents should be referenced with respect to this MIB: [G.991.2] ITU-T G991.2 `Single-pair high-speed digital subscriber line (SHDSL) transceivers,' December 2003. [DC-R15] ITU Study Group 15 Temporary Document `G.shdsl.bis: Draft Text`, April 2003. [RFC 3276] Ray, B., Abbi, R. `HDSL2-SHDSL-LINE-MIB', May 2002. ===================================================================== == == == Copyright (C) 2004 Paradyne Corporation. == == == =====================================================================
MODULE-IDENTITY

pdnHdsl2ShdslLineNotifications		1.3.6.1.4.1.1795.2.24.2.6.23.0
OBJECT IDENTIFIER

pdnHdsl2ShdslLineObjects		1.3.6.1.4.1.1795.2.24.2.6.23.1
OBJECT IDENTIFIER

pdnHdsl2ShdslLineAFNs		1.3.6.1.4.1.1795.2.24.2.6.23.2
OBJECT IDENTIFIER

pdnHdsl2ShdslLineConformance		1.3.6.1.4.1.1795.2.24.2.6.23.3
OBJECT IDENTIFIER

pdnHdsl2ShdslSpanStatusExtTable		1.3.6.1.4.1.1795.2.24.2.6.23.1.1
This table extends the hdsl2ShdslSpanStatusTable defined in the HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which provides overall information of DSL spans.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PdnHdsl2ShdslSpanStatusExtEntry

pdnHdsl2ShdslSpanStatusExtEntry		1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1
An entry extends the hdsl2ShdslSpanStatusEntry defined in [RFC 3276]. Each entry corresponds to a DSL line.
Status: current	Access: not-accessible
OBJECT-TYPE
	PdnHdsl2ShdslSpanStatusExtEntry

pdnHdsl2ShdslStatusMaxAttainableLineRate		1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.1
Contains the maximum attainable line rate, in bps, in this DSL span.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

pdnHdsl2ShdslStatusActualLineRate		1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.2
Contains the actual line rate, in bps, in this DSL span. This is based upon measurements made during line probing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

pdnHdsl2ShdslEndpointConfTable		1.3.6.1.4.1.1795.2.24.2.6.23.1.2
This table supports configuration parameters for segment endpoints in a HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a persistent manner.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PdnHdsl2ShdslEndpointConfEntry

pdnHdsl2ShdslEndpointConfEntry		1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1
Each entry represents a single segment endpoint in a HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire-pair of the associated modem.
Status: current	Access: not-accessible
OBJECT-TYPE
	PdnHdsl2ShdslEndpointConfEntry

pdnHdsl2ShdslEndpointWirePair		1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.1
The wire-pair of the modem associated with this segment endpoint as per the PdnHdsl2ShdslWirePair textual convention.
Status: current	Access: not-accessible
OBJECT-TYPE
	PdnHdsl2ShdslWirePair

pdnHdsl2ShdslEndpointAlarmConfProfile		1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.2
This object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced by this object. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable, or NULL (a zero- length SnmpAdminString). If the value is a zero-length SnmpAdminString, the endpoint uses the default Alarm Configuration Profile for the associated span as per the hdsl2ShdslSpanConfAlarmProfile object in the hdsl2ShdslSpanConfTable. The default value of this object is a zero-length SnmpAdminString. Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString	Size(0..32)

pdnHdsl2ShdslEndpointCurrTable		1.3.6.1.4.1.1795.2.24.2.6.23.1.3
This table contains current status and performance information for segment endpoints in HDSL2/SHDSL Lines. As with other tables in this MIB indexed by ifIndex, entries in this table MUST be maintained in a persistent manner.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PdnHdsl2ShdslEndpointCurrEntry

pdnHdsl2ShdslEndpointCurrEntry		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1
Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire-pair of the associated modem.
Status: current	Access: not-accessible
OBJECT-TYPE
	PdnHdsl2ShdslEndpointCurrEntry

pdnHdsl2ShdslEndpointCurrAtn		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.1
The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-127..128

pdnHdsl2ShdslEndpointCurrSnrMgn		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.2
The current SNR margin for this endpoint as reported in a Status Response/SNR message.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-127..128

pdnHdsl2ShdslEndpointCurrStatus		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.3
Contains the current state of the endpoint. This is a bitmap of possible conditions. The various bit positions are: noDefect There no defects on the line. powerBackoff Indicates enhanced Power Backoff. deviceFault Indicates a vendor-dependent diagnostic or self-test fault has been detected. dcContinuityFault Indicates vendor-dependent conditions that interfere with span powering such as short and open circuits. snrMarginAlarm Indicates that the SNR margin has dropped below the alarm threshold. loopAttenuationAlarm Indicates that the loop attenuation exceeds the alarm threshold. loswFailureAlarm Indicates a forward LOSW alarm. configInitFailure Endpoint failure during initialization due to paired endpoint not able to support requested configuration. protocolInitFailure Endpoint failure during initialization due to incompatible protocol used by the paired endpoint. noNeighborPresent Endpoint failure during initialization due to no activation sequence detected from paired endpoint. loopbackActive A loopback is currently active at this Segment Endpoint. This is intended to supplement ifOperStatus. Note that there is a 1-1 relationship between the status bits defined in this object and the notification thresholds defined elsewhere in this MIB.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	noDefect(0), powerBackoff(1), deviceFault(2), dcContinuityFault(3), snrMarginAlarm(4), loopAttenuationAlarm(5), loswFailureAlarm(6), configInitFailure(7), protocolInitFailure(8), noNeighborPresent(9), loopbackActive(10)

pdnHdsl2ShdslEndpointES		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.4
Count of Errored Seconds (ES) on this endpoint since the xU was last restarted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

pdnHdsl2ShdslEndpointSES		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.5
Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

pdnHdsl2ShdslEndpointCRCanomalies		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.6
Count of CRC anomalies on this endpoint since the xU was last restarted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

pdnHdsl2ShdslEndpointLOSWS		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.7
Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

pdnHdsl2ShdslEndpointUAS		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.8
Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

pdnHdsl2ShdslEndpointCurr15MinTimeElapsed		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.9
Total elapsed seconds in the current 15-minute interval.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2ShdslPerfTimeElapsed

pdnHdsl2ShdslEndpointCurr15MinES		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.10
Count of Errored Seconds (ES) in the current 15-minute interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfCurrentCount

pdnHdsl2ShdslEndpointCurr15MinSES		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.11
Count of Severely Errored Seconds (SES) in the current 15-minute interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfCurrentCount

pdnHdsl2ShdslEndpointCurr15MinCRCanomalies		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.12
Count of CRC anomalies in the current 15-minute interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfCurrentCount

pdnHdsl2ShdslEndpointCurr15MinLOSWS		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.13
Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfCurrentCount

pdnHdsl2ShdslEndpointCurr15MinUAS		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.14
Count of Unavailable Seconds (UAS) in the current 15-minute interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfCurrentCount

pdnHdsl2ShdslEndpointCurr1DayTimeElapsed		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.15
Number of seconds that have elapsed since the beginning of the current 1-day interval.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2ShdslPerfTimeElapsed

pdnHdsl2ShdslEndpointCurr1DayES		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.16
Count of Errored Seconds (ES) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2ShdslPerfCurrDayCount

pdnHdsl2ShdslEndpointCurr1DaySES		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.17
Count of Severely Errored Seconds (SES) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2ShdslPerfCurrDayCount

pdnHdsl2ShdslEndpointCurr1DayCRCanomalies		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.18
Count of CRC anomalies during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2ShdslPerfCurrDayCount

pdnHdsl2ShdslEndpointCurr1DayLOSWS		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.19
Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2ShdslPerfCurrDayCount

pdnHdsl2ShdslEndpointCurr1DayUAS		1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.20
Count of Unavailable Seconds (UAS) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2ShdslPerfCurrDayCount

pdnHdsl2Shdsl15MinIntervalTable		1.3.6.1.4.1.1795.2.24.2.6.23.1.4
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PdnHdsl2Shdsl15MinIntervalEntry

pdnHdsl2Shdsl15MinIntervalEntry		1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1
An entry in the pdnHdsl2Shdsl15MinIntervalTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	PdnHdsl2Shdsl15MinIntervalEntry

pdnHdsl2Shdsl15MinIntervalNumber		1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.1
Performance Data Interval number. 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..96

pdnHdsl2Shdsl15MinIntervalES		1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.2
Count of Errored Seconds (ES) during the interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

pdnHdsl2Shdsl15MinIntervalSES		1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.3
Count of Severely Errored Seconds (SES) during the interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

pdnHdsl2Shdsl15MinIntervalCRCanomalies		1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.4
Count of CRC anomalies during the interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

pdnHdsl2Shdsl15MinIntervalLOSWS		1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.5
Count of Loss of Sync Word (LOSW) Seconds during the interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

pdnHdsl2Shdsl15MinIntervalUAS		1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.6
Count of Unavailable Seconds (UAS) during the interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

pdnHdsl2Shdsl1DayIntervalTable		1.3.6.1.4.1.1795.2.24.2.6.23.1.5
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PdnHdsl2Shdsl1DayIntervalEntry

pdnHdsl2Shdsl1DayIntervalEntry		1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1
An entry in the pdnHdsl2Shdsl1DayIntervalTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	PdnHdsl2Shdsl1DayIntervalEntry

pdnHdsl2Shdsl1DayIntervalNumber		1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.1
History Data Interval number. Interval 1 is the the most recent previous day; interval 30 is 30 days ago. Intervals 2..30 are optional.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..30

pdnHdsl2Shdsl1DayIntervalMoniSecs		1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.2
The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2ShdslPerfTimeElapsed

pdnHdsl2Shdsl1DayIntervalES		1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.3
Count of Errored Seconds (ES) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2Shdsl1DayIntervalCount

pdnHdsl2Shdsl1DayIntervalSES		1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.4
Count of Severely Errored Seconds (SES) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2Shdsl1DayIntervalCount

pdnHdsl2Shdsl1DayIntervalCRCanomalies		1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.5
Count of CRC anomalies during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2Shdsl1DayIntervalCount

pdnHdsl2Shdsl1DayIntervalLOSWS		1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.6
Count of Loss of Sync Word (LOSW) Seconds during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2Shdsl1DayIntervalCount

pdnHdsl2Shdsl1DayIntervalUAS		1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.7
Count of Unavailable Seconds (UAS) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
Status: current	Access: read-only
OBJECT-TYPE
	Hdsl2Shdsl1DayIntervalCount

pdnHdsl2ShdslSpanConfProfileExtTable		1.3.6.1.4.1.1795.2.24.2.6.23.1.6
This table extends the hdsl2ShdslSpanConfProfileTable defined in the HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which supports definitions of span configuration profiles for DSL lines. IMPORTANT NOTE: This table is a 'pseudo-augments' of the hdsl2ShdslSpanConfProfileTable. Refer to the April 21, 2004 revision description for a discussion on why the table is indexed as opposed to augments. This table shares the same table table index as the hdsl2ShdslSpanConfProfileTable. However, this table does not have a row status object. Therefore, rows are created or deleted in this table by creating or deleting rows in the hdsl2ShdslSpanConfProfileTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PdnHdsl2ShdslSpanConfProfileExtEntry

pdnHdsl2ShdslSpanConfProfileExtEntry		1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1
An entry extends the hdsl2ShdslSpanConfProfileEntry defined in [RFC 3276]. Each entry corresponds to a profile for a span.
Status: current	Access: not-accessible
OBJECT-TYPE
	PdnHdsl2ShdslSpanConfProfileExtEntry

pdnHdsl2ShdslSpanConfWireInterface		1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.1
This object configures number of wires that are operational for this span. The following values are defined for this object: twoWire(1) - 2-wire mode fourWire(2) - 4-wire mode sixWire(3) - 6-wire mode eightWire(4) - 8-wire mode
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	twoWire(1), fourWire(2), sixWire(3), eightWire(4)

pdnHdsl2ShdslSpanConfMinLineRate		1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.2
This object configures the minimum transmission rate, in multiples of 64 kbits per second, for the associated DSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (pdnHdsl2ShdslSpanConfMaxLineRate), the line rate is considered `fixed'. If the minimum line rate is less than the maximum line rate, the line is considered `rate-adaptive'.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

pdnHdsl2ShdslSpanConfMaxLineRate		1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.3
This object configures the maximum transmission rate, in multiples of 64 kbits per second, for the associated DSL Line in bits-per-second (bps). If the minimum line rate (pdnHdsl2Shdsl- SpanConfMinLineRate) equals the maximum line rate, the line rate is considered `fixed'. if the minimum line rate is less than the maximum line rate, the line rate is considered `rate-adaptive'.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

pdnHdsl2ShdslIfTable		1.3.6.1.4.1.1795.2.24.2.6.23.1.7
This table provides objects related to a particular interface and each entry corresponds to an ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PdnHdsl2ShdslIfEntry

pdnHdsl2ShdslIfEntry		1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1
An entry in the pdnHdsl2ShdslIfTableTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	PdnHdsl2ShdslIfEntry

pdnHdsl2ShdslIfTableEquipMode		1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1.1
This object allows the mode of the equipment to be set.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	coMode(1), cpeMode(2)

pdnHdsl2ShdslExtendedRateMode		1.3.6.1.4.1.1795.2.24.2.6.23.1.8
This object is used to select a mode of operation that supports extended rates. Some hardware implementations require different configurations base on whether or not higher speed rates are desired. For example, an implementation may require different code be loaded in a digital signal processor or an implementation may dictate that fewer subscriber ports are supported for a higher data rate. The payload5696(2) corresponds to the 5696 kbits per second rate specified in G.991.2, Annex F.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), payload5696(2)

pdnHdsl2ShdslLoopAttenCrossing		1.3.6.1.4.1.1795.2.24.2.6.23.0.1
This notification indicates that the loop attenuation threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been reached/exceeded for the DSL segment endpoint.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslSNRMarginCrossing		1.3.6.1.4.1.1795.2.24.2.6.23.0.2
This notification indicates that the SNR margin threshold (as per the hdsl2ShdslEndpointThreshSNRMargin value) has been reached/exceeded for the DSL segment endpoint.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslPerfESThresh		1.3.6.1.4.1.1795.2.24.2.6.23.0.3
This notification indicates that the errored seconds threshold (as per the hdsl2ShdslEndpointThreshES value) has been reached/ exceeded for the DSL segment endpoint.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslPerfSESThresh		1.3.6.1.4.1.1795.2.24.2.6.23.0.4
This notification indicates that the severely errored seconds threshold (as per the hdsl2ShdslEndpointThreshSES value) has been reached/exceeded for the DSL Segment Endpoint.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslPerfCRCanomaliesThresh		1.3.6.1.4.1.1795.2.24.2.6.23.0.5
This notification indicates that the CRC anomalies threshold (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has been reached/exceeded for the DSL Segment Endpoint.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslPerfLOSWSThresh		1.3.6.1.4.1.1795.2.24.2.6.23.0.6
This notification indicates that the LOSW seconds threshold (as per the hdsl2ShdslEndpointThreshLOSWS value) has been reached/exceeded for the DSL segment endpoint.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslPerfUASThresh		1.3.6.1.4.1.1795.2.24.2.6.23.0.7
This notification indicates that the unavailable seconds threshold (as per the hdsl2ShdslEndpointThreshUAS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslpowerBackoff		1.3.6.1.4.1.1795.2.24.2.6.23.0.8
This notification indicates that the bit setting for powerBackoff in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdsldeviceFault		1.3.6.1.4.1.1795.2.24.2.6.23.0.9
This notification indicates that the bit setting for deviceFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdsldcContinuityFault		1.3.6.1.4.1.1795.2.24.2.6.23.0.10
This notification indicates that the bit setting for dcContinuityFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslconfigInitFailure		1.3.6.1.4.1.1795.2.24.2.6.23.0.11
This notification indicates that the bit setting for configInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslprotocolInitFailure		1.3.6.1.4.1.1795.2.24.2.6.23.0.12
This notification indicates that the bit setting for protocolInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslnoNeighborPresent		1.3.6.1.4.1.1795.2.24.2.6.23.0.13
This notification indicates that the bit setting for noNeighborPresent in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current	Access: read-write
NOTIFICATION-TYPE

pdnHdsl2ShdslLineCompliances		1.3.6.1.4.1.1795.2.24.2.6.23.3.1
OBJECT IDENTIFIER

pdnHdsl2ShdslLineGroups		1.3.6.1.4.1.1795.2.24.2.6.23.3.2
OBJECT IDENTIFIER

pdnHdsl2ShdslLineMIBCompliance		1.3.6.1.4.1.1795.2.24.2.6.23.3.1.1
The compliance statement for pdnHdsl2ShdslLineMIB entities which implement the pdnHdsl2ShdslLineMIB.
Status: current	Access: read-write
MODULE-COMPLIANCE

pdnHdsl2ShdslLineObjGroups		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1
OBJECT IDENTIFIER

pdnHdsl2ShdslLineAfnGroups		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.2
OBJECT IDENTIFIER

pdnHdsl2ShdslLineNtfyGroups		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3
OBJECT IDENTIFIER

pdnHdsl2ShdslSpanShdslStatusGroup		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.1
This group supports objects for retrieving SHDSL-specific span related status.
Status: current	Access: read-write
OBJECT-GROUP

pdnHdsl2ShdslEndpointConfGroup		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.2
This group supports objects for configuring parameters for segment endpoints in SHDSL lines.
Status: current	Access: read-write
OBJECT-GROUP

pdnHdsl2ShdslEndpointCurrGroup		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.3
This group supports objects which provide current status and performance measurements relating to segment endpoints in DSL lines.
Status: current	Access: read-write
OBJECT-GROUP

pdnHdsl2Shdsl15MinIntervalGroup		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.4
This group supports objects which maintain historic performance measurements relating to segment endpoints in DSL lines.
Status: current	Access: read-write
OBJECT-GROUP

pdnHdsl2Shdsl1DayIntervalGroup		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.5
This group supports objects which maintain historic performance measurements relating to segment endpoints in DSL line in 1-day intervals.
Status: current	Access: read-write
OBJECT-GROUP

pdnHdsl2ShdslSpanConfProfileGroup		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.6
This group supports objects that constitute configuration profiles for configuring span related parameters in DSL lines.
Status: current	Access: read-write
OBJECT-GROUP

pdnHdsl2ShdslIfTableGroup		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.7
This group supports objects on a per-interface basis.
Status: current	Access: read-write
OBJECT-GROUP

pdnHdsl2ShdslExtendedRateModeGroup		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.8
This group supports objects to select the extended base data rate mode.
Status: current	Access: read-write
OBJECT-GROUP

pdnHdsl2ShdslNotificationGroup		1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3.1
This group supports notifications of significant conditions associated with DSL lines.
Status: current	Access: read-write
NOTIFICATION-GROUP