PARAGON-MIB
File:
PARAGON-MIB.mib (66862 bytes)
Imported modules
Imported symbols
Defined Types
| PgBasicChannelEntry |
|
| SEQUENCE |
|
|
|
| |
pgChannelID |
INTEGER |
|
| |
pgChannelIPGCount |
Counter |
|
| |
pgChannelIPGThreshold |
Counter |
|
| |
pgChannelMinimumIPG |
Counter |
|
| |
pgChannelStatus |
INTEGER |
|
| |
pgChannelNumOfCards |
INTEGER |
|
| PgBasicCardEntry |
|
| SEQUENCE |
|
|
|
| |
pgCardChannelBasicID |
INTEGER |
|
| |
pgCardBasicID |
INTEGER |
|
| |
pgCardType |
DisplayString |
|
| |
pgCardSize |
INTEGER |
|
| |
pgCardSerialID |
DisplayString |
|
| PgBasicPortEntry |
|
| SEQUENCE |
|
|
|
| |
pgPortChannelBasicID |
INTEGER |
|
| |
pgPortCardBasicID |
INTEGER |
|
| |
pgPortBasicID |
INTEGER |
|
| |
pgPortMediaType |
INTEGER |
|
| PgAgentLearnedNMSEntry |
|
| SEQUENCE |
|
|
|
| |
pgAgentLearnedNMSAddr |
IpAddress |
|
| PgMonitorRptrEntry |
|
| SEQUENCE |
|
|
|
| |
pgMonRptrID |
INTEGER |
|
| |
pgMonRptrTotalFrames |
Counter |
|
| |
pgMonRptrTotalReadFrames |
Counter |
|
| |
pgMonRptrTotalFCSErrs |
Counter |
|
| |
pgMonRptrTotalAlignmentErrs |
Counter |
|
| |
pgMonRptrTotalRunts |
Counter |
|
| |
pgMonRptrTotalLateColl |
Counter |
|
| |
pgMonRptrTotalShortEvents |
Counter |
|
| |
pgMonRptrMPRStatus |
INTEGER |
|
| |
pgMonRptrMPRMJLPCount |
Counter |
|
| PgMonitorPortEntry |
|
| SEQUENCE |
|
|
|
| |
pgMonPortRptrID |
INTEGER |
|
| |
pgMonPortCardID |
INTEGER |
|
| |
pgMonPortID |
INTEGER |
|
| |
pgMonPortTotalFrames |
Counter |
|
| |
pgMonPortTotalCollisions |
Counter |
|
| |
pgMonPortCollRate |
INTEGER |
|
| |
pgMonPortCollThreshold |
INTEGER |
|
| |
pgMonPortLateCollisions |
Counter |
|
| |
pgMonPortErrorRate |
INTEGER |
|
| |
pgMonPortErrorThreshold |
INTEGER |
|
| |
pgMonPortOutOfRange |
Counter |
|
| |
pgMonPortCollHysteresis |
INTEGER |
|
| |
pgMonPortErrorHysteresis |
INTEGER |
|
| |
pgMonPortLinkStatus |
INTEGER |
|
| |
pgMonPortJabberStatus |
INTEGER |
|
| |
pgMonPortTransmitCollisions |
Counter |
|
| DuphmBasicHubEntry |
|
| SEQUENCE |
|
|
|
| |
dupHubID |
INTEGER |
|
| |
duphubGroupCapacity |
INTEGER |
|
| |
duphubGroupMap |
OCTET STRING |
|
| DuphmBasicGroupEntry |
|
| SEQUENCE |
|
|
|
| |
dupgroupHubID |
INTEGER |
|
| |
dupgroupID |
INTEGER |
|
| |
dupgroupNumberOfPorts |
INTEGER |
|
| DuphmBasicPortEntry |
|
| SEQUENCE |
|
|
|
| |
dupportHubBasicID |
OCTET STRING |
|
| |
dupportGroupBasicID |
INTEGER |
|
| |
dupportBasicID |
INTEGER |
|
| |
dupportType |
INTEGER |
|
| |
dupportAdminState |
INTEGER |
|
| |
dupportAutoPartitionState |
INTEGER |
|
| DuphmSelfTestHubEntry |
|
| SEQUENCE |
|
|
|
| |
duphubSelfTestID |
INTEGER |
|
| |
duptimeSinceHubSystemReset |
INTEGER |
|
| |
duphubResetTimeStamp |
INTEGER |
|
| |
duphubHealthState |
INTEGER |
|
| |
duphubHealthText |
DisplayString |
|
| |
duphubHealthData |
OCTET STRING |
|
| |
duphubSystemResetting |
INTEGER |
|
| |
duphubResetting |
INTEGER |
|
| |
duphubExecutingSelfTest |
INTEGER |
|
| DuphmPerfMonRelayEntry |
|
| SEQUENCE |
|
|
|
| |
duprelayHubPerfID |
INTEGER |
|
| |
duprelayPerfID |
INTEGER |
|
| |
duprelayTotalCollisions |
INTEGER |
|
| DuphmPerfMonPortEntry |
|
| SEQUENCE |
|
|
|
| |
dupportHubPerfID |
INTEGER |
|
| |
dupportGroupPerfID |
INTEGER |
|
| |
dupportPerfID |
INTEGER |
|
| |
dupportReadableFrames |
Counter |
|
| |
dupportReadableOctets |
Counter |
|
| |
dupportShortEvents |
Counter |
|
| |
dupportRunts |
Counter |
|
| |
dupportFrameCheckSeqErrs |
Counter |
|
| |
dupportAlignmentErrors |
Counter |
|
| |
dupportFramesTooLong |
Counter |
|
| |
dupportAutoPartitionCount |
Counter |
|
| DuphmAddrTrackPortEntry |
|
| SEQUENCE |
|
|
|
| |
dupportHubAddrID |
INTEGER |
|
| |
dupportGroupAddrID |
INTEGER |
|
| |
dupportAddrID |
INTEGER |
|
| |
dupportLastSourceAddress |
OCTET STRING |
|
| |
dupportSourceAddrChanges |
Counter |
|
Defined Values
| dupont |
1.3.6.1.4.1.159 |
| OBJECT IDENTIFIER |
|
|
|
| products |
1.3.6.1.4.1.159.2 |
| OBJECT IDENTIFIER |
|
|
|
| paragon |
1.3.6.1.4.1.159.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| temporary |
1.3.6.1.4.1.159.1 |
| OBJECT IDENTIFIER |
|
|
|
| pgBasicChannelTable |
1.3.6.1.4.1.159.2.1.1.1 |
| Status and configuration information for a collection of
channels in the Paragon system concentrator. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PgBasicChannelEntry |
|
| pgBasicChannelEntry |
1.3.6.1.4.1.159.2.1.1.1.1 |
| Status and configuration information for a particular
channel in the Paragon system concentrator. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PgBasicChannelEntry |
|
|
| pgChannelID |
1.3.6.1.4.1.159.2.1.1.1.1.1 |
| The value of the Paragon Channel ID is assigned
so as to uniquely identify a channel in the Paragon system
where a single agent manages multiple channels. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2 |
|
| pgChannelIPGCount |
1.3.6.1.4.1.159.2.1.1.1.1.2 |
| pgChannelIPGCount object counts the number of
IPGs below the object pgMonRptrIPGThreshold,
since agent reset. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgChannelIPGThreshold |
1.3.6.1.4.1.159.2.1.1.1.1.3 |
| This object can be set to trigger a proprietary Threshold
Crossed Trap. The IPG Threshold is measured in bit times.
(e.g. If the inter-packet gap is 9.6 us,
this is equivalent to 96 bit times). |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgChannelMinimumIPG |
1.3.6.1.4.1.159.2.1.1.1.1.4 |
| pgChannelMinimumIPG object identifies the lowest inter-packet
gap value in bit times obtained for this repeater
since the last agent reset. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgChannelStatus |
1.3.6.1.4.1.159.2.1.1.1.1.5 |
| The pgChannelStatus indicates whether the
Paragon system agent can control/monitor
the channel effectively. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
manageable(0), controllable(1) |
|
| pgChannelNumOfCards |
1.3.6.1.4.1.159.2.1.1.1.1.6 |
| The pgChannelNumOfCards object identifies the number
of groups currently in the Paragon system
concentrator which can potentially connect to this
channel. Note: A group is connected to a channel when
at least one of its ports is connected to the channel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..20 |
|
| pgBasicCardTable |
1.3.6.1.4.1.159.2.1.1.2 |
| Table of descriptive information about the groups of
ports. This table will return the same information
regardles of the pgCardChannelBasicID |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PgBasicCardEntry |
|
| pgBasicCardEntry |
1.3.6.1.4.1.159.2.1.1.2.1 |
| An entry in the table, containing information about
a single group of ports. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PgBasicCardEntry |
|
|
| pgCardChannelBasicID |
1.3.6.1.4.1.159.2.1.1.2.1.1 |
| Channel ID for identifying the card. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2 |
|
| pgCardBasicID |
1.3.6.1.4.1.159.2.1.1.2.1.2 |
| A value unique within the Paragon system concentrator,
where the slots are numbered from left to right. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..20 |
|
| pgCardType |
1.3.6.1.4.1.159.2.1.1.2.1.3 |
| The pgCardType object is a text string that contains
the product code for order entry purposes (e.g. EOM-0601). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(1..16) |
|
| pgCardSize |
1.3.6.1.4.1.159.2.1.1.2.1.4 |
| The pgCardSize object indicates the number of slots
the card occupies in the Paragon system concentrator. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..3 |
|
| pgCardSerialID |
1.3.6.1.4.1.159.2.1.1.2.1.5 |
| The pgCardSerialID object contains a unique
serial code. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(1..16) |
|
| pgBasicPortTable |
1.3.6.1.4.1.159.2.1.1.3 |
| Table of descriptive information about the ports. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PgBasicPortEntry |
|
| pgBasicPortEntry |
1.3.6.1.4.1.159.2.1.1.3.1 |
| An entry in the table, containing information about
a single port. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PgBasicPortEntry |
|
|
| pgPortChannelBasicID |
1.3.6.1.4.1.159.2.1.1.3.1.1 |
| Channel ID for identifying the port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2 |
|
| pgPortCardBasicID |
1.3.6.1.4.1.159.2.1.1.3.1.2 |
| Card ID for identifying the port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..20 |
|
| pgPortBasicID |
1.3.6.1.4.1.159.2.1.1.3.1.3 |
| A value unique on the card indicating the port ID. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..12 |
|
| pgAgentSerialNum |
1.3.6.1.4.1.159.2.1.2.1.1.1 |
| The pgAgentSerialNum object contains a unique
serial code for the agent module hardware. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(1..16) |
|
| pgAgentSoftware |
1.3.6.1.4.1.159.2.1.2.1.1.2 |
| The pgAgentSoftware object contains the agent module's
software revision level. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(1..10) |
|
| pgAgentROM |
1.3.6.1.4.1.159.2.1.2.1.1.3 |
| The pgAgentROM object contains the agent module's ROM
revision level. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(1..10) |
|
| pgAgentFlowControl |
1.3.6.1.4.1.159.2.1.2.2.1.1 |
| The pgAgentFlowControl indicates whether the
flow control for the serial port is enabled. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| pgAgentBaud |
1.3.6.1.4.1.159.2.1.2.2.1.2 |
| The pgAgentBaud indicates the baud rate for the
agent module's serial port. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
bps300(300), bps1200(1200), bps2400(2400), bps4800(4800), bps9600(9600), bps19200(19200) |
|
| pgAgentStopBits |
1.3.6.1.4.1.159.2.1.2.2.1.3 |
| The pgAgentStopBits object indicates the
number of stop bits in use for the agent`s serial
port. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2 |
|
| pgAgentParity |
1.3.6.1.4.1.159.2.1.2.2.1.4 |
| The pgAgentParity indicates the parity in use for
the agent module's serial port. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), even(1), odd(2) |
|
| pgAgentCommBandType |
1.3.6.1.4.1.159.2.1.2.3.1.1 |
| pgAgentCommBandType object indicates whether communication
between the agent module and the pgAgentCurrentPrimary
network management station is in-band or
out-of-band. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
in-band(0), out-of-band(1) |
|
| pgAgentTimeout |
1.3.6.1.4.1.159.2.1.2.3.1.2 |
| pgAgentTimeout object indicates the amount of
time before an agent will search for a new NMS upon
receiving no communication from the current NMS. A
zero value inhibits the agent from ever searching for
a new NMS. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| pgAgentDesignatedPrimary |
1.3.6.1.4.1.159.2.1.2.3.1.3 |
| pgAgentDesignatedPrimary object identifies the network
address of the 'Primary' network management station.
The 'Primary' NMS is designated by the agent's download
server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentLastAuthFail |
1.3.6.1.4.1.159.2.1.2.3.1.4 |
| pgAgentLastAuthFail object identifies the last
SNMP entity which caused the agent to issue a standard
SNMP authentiction trap. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentLastSecurityFail |
1.3.6.1.4.1.159.2.1.2.3.1.5 |
| pgAgentLastSecurityFail object identifies the last
SNMP entity which caused the agent to issue a proprietary
Security Failure trap. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentCurrentPrimary |
1.3.6.1.4.1.159.2.1.2.3.1.6 |
| pgAgentCurrentPrimary object identifies the current
'Primary' network management station by network address.
Note: this variable is only read-write for a SNMP
Set-Request delivered from the pgAgentDesignatedPrimary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentDownloadServer |
1.3.6.1.4.1.159.2.1.2.3.1.7 |
| pgAgentDownloadServer object identifies the download
server station by network address. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentLastSetRequest |
1.3.6.1.4.1.159.2.1.2.3.1.8 |
| pgAgentLastSetRequest object identifies the last
SNMP entity that sent a SET-REQUEST to the agent. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentDipSwitches |
1.3.6.1.4.1.159.2.1.2.3.1.9 |
| This octet string represents the current configuration
of the agent's dipswitch settings, encoded as a bit
string. Each dipswitch is represented by a single bit.
When the value of a bit=1, it indicates that the dipswitch is
set to the ON position. The number of octets is 2 to
represent the 10 dipswitches. The first octet will encode the
configuration of dipswitches 1-8, where 1 represents the
Serial Port Access, 2 represents the Timeout Feature, and
3 represents the Security Feature,7 represents agent
configuration, and 8 represents talking through a router.
The rest of the dipswitches are currently not used. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1..2) |
|
| pgAgentNetPackAddr1 |
1.3.6.1.4.1.159.2.1.2.3.1.10 |
| pgAgentNetPackAddr1 object contains the network
address for the NetPack1. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentNetPackAddr2 |
1.3.6.1.4.1.159.2.1.2.3.1.11 |
| pgAgentNetPackAddr2 object contains the network
address for the NetPack2. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentNetPackAddr3 |
1.3.6.1.4.1.159.2.1.2.3.1.12 |
| pgAgentNetPackAddr3 object contains the network
address for the NetPack3. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentNetPackAddr4 |
1.3.6.1.4.1.159.2.1.2.3.1.13 |
| pgAgentNetPackAddr4 object contains the network
address for the NetPack4. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentNetPackAddr5 |
1.3.6.1.4.1.159.2.1.2.3.1.14 |
| pgAgentNetPackAddr5 object contains the network
address for the NetPack5. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentNetPackAddr6 |
1.3.6.1.4.1.159.2.1.2.3.1.15 |
| pgAgentNetPackAddr6 object contains the network
address for the NetPack6. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentLearnedNMSTable |
1.3.6.1.4.1.159.2.1.2.3.1.16 |
| Table of information about the network management
stations which have communicated with the agent. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PgAgentLearnedNMSEntry |
|
| pgAgentLearnedNMSEntry |
1.3.6.1.4.1.159.2.1.2.3.1.16.1 |
| An entry in the table, containing information about
a network management station which has communicated
with the agent. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PgAgentLearnedNMSEntry |
|
|
| pgAgentLearnedNMSAddr |
1.3.6.1.4.1.159.2.1.2.3.1.16.1.1 |
| pgAgentLearnedNMSAddr object identifies the
address of the NMS which has communicated with
this agent. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| pgAgentNetPackMACAddr1 |
1.3.6.1.4.1.159.2.1.2.3.1.17 |
| pgAgentNetPackMACAddr1 object contains the MAC
address for the NetPack1. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| pgAgentNetPackMACAddr2 |
1.3.6.1.4.1.159.2.1.2.3.1.18 |
| pgAgentNetPackMACAddr2 object contains the MAC
address for the NetPack2. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| pgAgentNetPackMACAddr3 |
1.3.6.1.4.1.159.2.1.2.3.1.19 |
| pgAgentNetPackMACAddr3 object contains the MAC
address for the NetPack3. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| pgAgentNetPackMACAddr4 |
1.3.6.1.4.1.159.2.1.2.3.1.20 |
| pgAgentNetPackMACAddr4 object contains the MAC
address for the NetPack4. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| pgAgentNetPackMACAddr5 |
1.3.6.1.4.1.159.2.1.2.3.1.21 |
| pgAgentNetPackMACAddr5 object contains the MAC
address for the NetPack5. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| pgAgentNetPackMACAddr6 |
1.3.6.1.4.1.159.2.1.2.3.1.22 |
| pgAgentNetPackMACAddr6 object contains the MAC
address for the NetPack6. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| pgAgentNetPackState1 |
1.3.6.1.4.1.159.2.1.2.3.1.23 |
| pgAgentNetPackState1 object identifies the state
of the NetPack1. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(0), initializing(1), monitoring(2), nms-netpack(3), installed-not-in-use(4) |
|
| pgAgentNetPackState2 |
1.3.6.1.4.1.159.2.1.2.3.1.24 |
| pgAgentNetPackState2 object identifies the state
of the NetPack2. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(0), initializing(1), monitoring(2), nms-netpack(3), installed-not-in-use(4) |
|
| pgAgentNetPackState3 |
1.3.6.1.4.1.159.2.1.2.3.1.25 |
| pgAgentNetPackState3 object identifies the state
of the NetPack3. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(0), initializing(1), monitoring(2), nms-netpack(3), installed-not-in-use(4) |
|
| pgAgentNetPackState4 |
1.3.6.1.4.1.159.2.1.2.3.1.26 |
| pgAgentNetPackState4 object identifies the state
of the NetPack4. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(0), initializing(1), monitoring(2), nms-netpack(3), installed-not-in-use(4) |
|
| pgAgentNetPackState5 |
1.3.6.1.4.1.159.2.1.2.3.1.27 |
| pgAgentNetPackState5 object identifies the state
of the NetPack5. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(0), initializing(1), monitoring(2), nms-netpack(3), installed-not-in-use(4) |
|
| pgAgentNetPackState6 |
1.3.6.1.4.1.159.2.1.2.3.1.28 |
| pgAgentNetPackState6 object identifies the state
of the NetPack6. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(0), initializing(1), monitoring(2), nms-netpack(3), installed-not-in-use(4) |
|
| pgAgentConfigChanges |
1.3.6.1.4.1.159.2.1.2.3.1.29 |
| Denotes whether a configuration change has been noted in
the Concentrator after a power-up condition. This object
is bound as part of the ColdStart Trap optional variables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no-Change(0), change-Found(1) |
|
| pgAgentDaughterboard |
1.3.6.1.4.1.159.2.1.2.4.1 |
| Status condition for the Agent Module optional Daughterboard. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(1), normal(2), fault(3) |
|
| pgAgentInternalBus |
1.3.6.1.4.1.159.2.1.2.4.2 |
| Status condition for the Agent Module MCI Bus |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
reserved(1), normal(2), fault(3) |
|
| pgAgentCorrelator |
1.3.6.1.4.1.159.2.1.2.4.3 |
| Status condition for the Agent Module Data Acquisition
Foreground Process. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
reserved(1), normal(2), fault(3), cant-get-synch(4), mci-command-timeout(5), mci-timeout-error(6), pending-full(7), mci-error(8), fbc-request-full(9), amb-cant-send-response(10), fore-out-of-buffers(11), mw-out-of-range(12) |
|
| pgAgentNetPackStatus1 |
1.3.6.1.4.1.159.2.1.2.4.4 |
| pgAgentNetPackStatus1 object indicates the current
operational status of the Agent's NetPack. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(1), normal(2), fault(3) |
|
| pgAgentNetPackStatus2 |
1.3.6.1.4.1.159.2.1.2.4.5 |
| pgAgentNetPackStatus2 object indicates the current
operational status of the Agent's NetPack. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(1), normal(2), fault(3) |
|
| pgAgentNetPackStatus3 |
1.3.6.1.4.1.159.2.1.2.4.6 |
| pgAgentNetPackStatus3 object indicates the current
operational status of the Agent's NetPack. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(1), normal(2), fault(3) |
|
| pgAgentNetPackStatus4 |
1.3.6.1.4.1.159.2.1.2.4.7 |
| pgAgentNetPackStatus4 object indicates the current
operational status of the Agent's NetPack. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(1), normal(2), fault(3) |
|
| pgAgentNetPackStatus5 |
1.3.6.1.4.1.159.2.1.2.4.8 |
| pgAgentNetPackStatus5 object indicates the current
operational status of the Agent's NetPack. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(1), normal(2), fault(3) |
|
| pgAgentNetPackStatus6 |
1.3.6.1.4.1.159.2.1.2.4.9 |
| pgAgentNetPackStatus6 object indicates the current
operational status of the Agent's NetPack. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notInstalled(1), normal(2), fault(3) |
|
| pgMonitorRptrTable |
1.3.6.1.4.1.159.2.1.3.1 |
| Statistics for the current functioning repeater in the
concentrator. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PgMonitorRptrEntry |
|
| pgMonitorRptrEntry |
1.3.6.1.4.1.159.2.1.3.1.1 |
| Entry for the current functioning repeater in the
concentrator. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PgMonitorRptrEntry |
|
|
| pgMonRptrID |
1.3.6.1.4.1.159.2.1.3.1.1.1 |
| pgMonRptrID identifies the repeaterfor which this entry
contains monitor information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2 |
|
| pgMonRptrTotalFrames |
1.3.6.1.4.1.159.2.1.3.1.1.2 |
| pgMonRptrTotalFrames counts the total number of frames that
have been received by the repeater, including error prone
packets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonRptrTotalReadFrames |
1.3.6.1.4.1.159.2.1.3.1.1.3 |
| pgMonRptrTotalReadFrames counts the total number of frames
that have valid frame length and no FCS Errors. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonRptrTotalFCSErrs |
1.3.6.1.4.1.159.2.1.3.1.1.4 |
| pgMonRptrTotalFCSErrs counts the total number of frames
that have FCS Errors and no Framing Errors. The frame size
must also be greater than or equal to 64 octets and less than
or equal to 1518 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonRptrTotalAlignmentErrs |
1.3.6.1.4.1.159.2.1.3.1.1.5 |
| pgMonRptrTotalAlignmentErrs counts the total number of frames
that have both FCS Errors and Framing Errors. The frame size
must also be greater than or equal to 64 octets and less than
or equal to 1518 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonRptrTotalRunts |
1.3.6.1.4.1.159.2.1.3.1.1.6 |
| pgMonRptrTotalRunts counts the total number of collision
fragments with runt errors (frames longer than 74 bits and
less than 512 bits). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonRptrTotalLateColl |
1.3.6.1.4.1.159.2.1.3.1.1.7 |
| pgMonRptrTotalLateColl counts the total number of collision
fragments with size longer than 512 bits. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonRptrTotalShortEvents |
1.3.6.1.4.1.159.2.1.3.1.1.8 |
| pgMonRptrTotalShortEvents of fragments received by the
repeater that are less than 74 bits in length. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonRptrMPRStatus |
1.3.6.1.4.1.159.2.1.3.1.1.9 |
| pgMonRptrMPRStatus indicates the current status of the MPR.
It will display the value of Normal when the MPR is not
experiencing one of the error conditions. If more than one of
the error conditions is present in close succession, a
pgMPRErrors trap will be sent for each of the error
conditions noted. pgMonRptrMPRStatus will hold the value
of the most recent status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
normal(1), fIFO-Underrun(2), fIFO-Overflowed(3), mJLP-Activated(4), timed-Out-Reset(5), other(6) |
|
| pgMonRptrMPRMJLPCount |
1.3.6.1.4.1.159.2.1.3.1.1.10 |
| pgMonRptrMPRMJLPCount indicates the number of times the MAU
Jabber Lockup Protection (MJLP) has been activated. This
variable counts how many times the MPR has noted jabbering on
a port and has initiated its MJLP feature to control this
jabbering. After a port has sent 50 milliseconds of constant
data, the MJLP feature will interrupt a port and stop data from
being sent on that port for 10 microseconds. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonitorPortTable |
1.3.6.1.4.1.159.2.1.3.2 |
| Table of statistical information about the monitored ports. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PgMonitorPortEntry |
|
| pgMonitorPortEntry |
1.3.6.1.4.1.159.2.1.3.2.1 |
| An entry in the pgMonitorPortTable, containing statistical
information about a single port. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PgMonitorPortEntry |
|
|
| pgMonPortRptrID |
1.3.6.1.4.1.159.2.1.3.2.1.1 |
| Repeater ID for the specified port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2 |
|
| pgMonPortCardID |
1.3.6.1.4.1.159.2.1.3.2.1.2 |
| Card ID for the specified port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..20 |
|
| pgMonPortID |
1.3.6.1.4.1.159.2.1.3.2.1.3 |
| A value unique to the card indicating the port ID. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..12 |
|
| pgMonPortTotalFrames |
1.3.6.1.4.1.159.2.1.3.2.1.4 |
| pgMonPortTotalFrames is a count of the number of frames
that have been received by the port, including error prone
packets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonPortTotalCollisions |
1.3.6.1.4.1.159.2.1.3.2.1.5 |
| pgMonPortTotalCollisions is a count of the number of fragments
that have size less than 512 bits. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonPortCollRate |
1.3.6.1.4.1.159.2.1.3.2.1.6 |
| pgMonPortCollRate is a calculation of the total number of
collisions for the last second divided by the frames received
(pgMonPortTotalFrames) for the last second. This value is
expressed in tenths of a percent. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| pgMonPortCollThreshold |
1.3.6.1.4.1.159.2.1.3.2.1.7 |
| pgMonPortCollThreshold is the threshold value for collision
rate in percent which, if reached, causes a proprietary trap
notification to be sent to the NMS. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| pgMonPortLateCollisions |
1.3.6.1.4.1.159.2.1.3.2.1.8 |
| pgMonPortLateCollisions is the count of collisions which
occured after 512 bit times. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonPortErrorRate |
1.3.6.1.4.1.159.2.1.3.2.1.9 |
| pgMonPortErrorRate is a calculation of the total number of
errors (FCS, Alignment, Short Events, Frames Too Long) for
the last second divided by the frames received
(pgMonPortTotalFrames) for the last second. This value
is expressed in tenths of a percent. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| pgMonPortErrorThreshold |
1.3.6.1.4.1.159.2.1.3.2.1.10 |
| pgMonPortErrorThreshold is the threshold value for error
rate in percent which, if reached, causes a proprietary trap
notification to be sent to the NMS. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| pgMonPortOutOfRange |
1.3.6.1.4.1.159.2.1.3.2.1.11 |
| pgMonPortOutOfRange is count of frames which are noted as
having their size out of the range for good frames. That is
either greater than 1518 octets or less than 64 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgMonPortCollHysteresis |
1.3.6.1.4.1.159.2.1.3.2.1.12 |
| pgMonPortCollHysteresis is the hysteresis value for the
collision rate in percent which if crossed (after a Threshold
cross) causes a proprietary trap notification to be sent to
the NMS. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| pgMonPortErrorHysteresis |
1.3.6.1.4.1.159.2.1.3.2.1.13 |
| pgMonPortErrorHysteresis is the hysteresis value for the
error rate in percent which if crossed (after a Threshold
cross) causes a proprietary trap notification to be sent to
the NMS. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| pgMonPortLinkStatus |
1.3.6.1.4.1.159.2.1.3.2.1.14 |
| pgMonPortLinkStatus indicates whether the port state is link
pass or link fail. This status is applicable to
the following cards: Ethernet Twisted Pair, Ethernet
Optical Module. Ports on other cards will report
Not-Applicable for this status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
not-Applicable(1), link-Pass-State(2), link-Fail-State(3) |
|
| pgMonPortJabberStatus |
1.3.6.1.4.1.159.2.1.3.2.1.15 |
| pgMonPortJabberStatus indicates whether the port is
currently jabbering or not. This status is applicable to
the following cards: Ethernet Twisted Pair, Ethernet
Optical Module. Ports on other cards will report
Not-Applicable for this status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
not-Applicable(1), non-Jabber-State(2), jabber-State(3) |
|
| pgMonPortTransmitCollisions |
1.3.6.1.4.1.159.2.1.3.2.1.16 |
| pgMonPortTransmitCollisions is incremented each time
a port transmits and receives data simultaneously or two
ports receive data simultaneously. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| pgConcModel |
1.3.6.1.4.1.159.2.1.4.1.1.1 |
| pgConcModel is the model number of the concentrator for
order entry purposes. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(1..16) |
|
| pgConcSerialNumber |
1.3.6.1.4.1.159.2.1.4.1.1.2 |
| pgConcSerialNumber is the serial number of the concentrator. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(1..16) |
|
| pgConcTemperature |
1.3.6.1.4.1.159.2.1.4.1.1.3 |
| pgConcTemperature indicates operating temperature state for
the concentrator. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
normal(0), overTemperature(1) |
|
| pgConcPowerSupply |
1.3.6.1.4.1.159.2.1.4.1.1.4 |
| pgConcPowerSupply indicates dual-redundant power supply status
for the concentrator. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
powerSupply2Fault(1), powerSupply1Fault(2), powerSupplysOK(3) |
|
| pgWarmStartReset |
1.3.6.1.4.1.159.2.1.5.1.1.1 |
| pgWarmStartReset is an action requesting a warm start of the
concentrator system. All counters are cleared for all Hubs
and a Warm Start Trap is issued to the NMS. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no-reset(0), reset(1) |
|
| pgColdStartReset |
1.3.6.1.4.1.159.2.1.5.1.1.2 |
| pgColdStartReset is an action requesting a cold start of the
concentrator system. If the value is resetWithCurrentConfig
then all counters are cleared for all Hubs with the
concentrator configuration kept intact. If the value is
resetWithDefaultConfig then all counters are cleared for all
Hubs with the concentrator configuration reset to default
values. All Repeaters are reset and a Cold Start Trap is
issued to the NMS. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no-reset(0), resetWithCurrentConfig(1), resetWithDefaultConfig(2) |
|
| pgNetPackSelftest |
1.3.6.1.4.1.159.2.1.5.1.1.3 |
| pgNetPackSelftest is an action requesting the Selftest of any
one of the system NetPacks. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
testNetPack1(0), testNetPack2(1), testNetPack3(2), testNetPack4(3), testNetPack5(4), testNetPack6(5) |
|
| pgReturnToPrimaryMS |
1.3.6.1.4.1.159.2.1.5.1.1.4 |
| pgReturnToPrimaryMS is an action requesting the return of the
Agent to the specified primary channel for communication to
its primary NMS. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no-return(0), return(1) |
|
| pgHubColdReset |
1.3.6.1.4.1.159.2.1.5.1.1.5 |
| pgHubColdReset is an action requesting the clearing of all
counters and statistics for the specified Hub. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no-reset(0), resetHub1(1), resetHub2(2) |
|
| pgHubWarmReset |
1.3.6.1.4.1.159.2.1.5.1.1.6 |
| pgHubWarmReset is an action requesting the Reset of counters
for the specified Hub in the System, without any affect on
the configuration. The MPR for the specified Hub will not
be reset. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no-reset(0), resetHub1(1), resetHub2(2) |
|
| duphmBasicHubTable |
1.3.6.1.4.1.159.1.1.1.1 |
| duphmBasicHubTable is table depicting the basic 802.3 Hub
Management objects. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DuphmBasicHubEntry |
|
| duphmBasicHubEntry |
1.3.6.1.4.1.159.1.1.1.1.1 |
| duphmBasicHubEntry is the entry for a specifed Hub in the
duphmBasicHubTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DuphmBasicHubEntry |
|
|
| duphubID |
1.3.6.1.4.1.159.1.1.1.1.1.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| duphubGroupCapacity |
1.3.6.1.4.1.159.1.1.1.1.1.2 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| duphubGroupMap |
1.3.6.1.4.1.159.1.1.1.1.1.3 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| duphmBasicGroupEntry |
1.3.6.1.4.1.159.1.1.1.2.1 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DuphmBasicGroupEntry |
|
|
| dupgroupHubID |
1.3.6.1.4.1.159.1.1.1.2.1.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dupgroupID |
1.3.6.1.4.1.159.1.1.1.2.1.2 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| dupgroupNumberOfPorts |
1.3.6.1.4.1.159.1.1.1.2.1.3 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| duphmBasicPortEntry |
1.3.6.1.4.1.159.1.1.1.3.1 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DuphmBasicPortEntry |
|
|
| dupportHubBasicID |
1.3.6.1.4.1.159.1.1.1.3.1.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dupportGroupBasicID |
1.3.6.1.4.1.159.1.1.1.3.1.2 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| dupportBasicID |
1.3.6.1.4.1.159.1.1.1.3.1.3 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| dupportType |
1.3.6.1.4.1.159.1.1.1.3.1.4 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), repeater(2), tenBASE-FAsync(3), tenBASE-FSynch(4) |
|
| dupportAdminState |
1.3.6.1.4.1.159.1.1.1.3.1.5 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), disabled(2), enabled(3) |
|
| dupportAutoPartitionState |
1.3.6.1.4.1.159.1.1.1.3.1.6 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), notAutoPartitioned(2), autoPartitioned(3) |
|
| duphmSelfTestHubEntry |
1.3.6.1.4.1.159.1.1.2.1.1 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DuphmSelfTestHubEntry |
|
|
| duphubSelfTestID |
1.3.6.1.4.1.159.1.1.2.1.1.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| duphubResetTimeStamp |
1.3.6.1.4.1.159.1.1.2.1.1.3 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| duphubHealthState |
1.3.6.1.4.1.159.1.1.2.1.1.4 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), ok(2), failed(3) |
|
| duphubHealthText |
1.3.6.1.4.1.159.1.1.2.1.1.5 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| duphubHealthData |
1.3.6.1.4.1.159.1.1.2.1.1.6 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..255) |
|
| duphubSystemResetting |
1.3.6.1.4.1.159.1.1.2.1.1.7 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notResetting(1), resetting(2) |
|
| duphubResetting |
1.3.6.1.4.1.159.1.1.2.1.1.8 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notResetting(1), resetting(2) |
|
| duphubExecutingSelfTest |
1.3.6.1.4.1.159.1.1.2.1.1.9 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notSelfTesting(1), selfTesting(2) |
|
| duphmPerfMonRelayEntry |
1.3.6.1.4.1.159.1.1.3.1.1 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DuphmPerfMonRelayEntry |
|
|
| duprelayHubPerfID |
1.3.6.1.4.1.159.1.1.3.1.1.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| duprelayPerfID |
1.3.6.1.4.1.159.1.1.3.1.1.2 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| duphmPerfMonPortEntry |
1.3.6.1.4.1.159.1.1.3.2.1 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DuphmPerfMonPortEntry |
|
|
| dupportHubPerfID |
1.3.6.1.4.1.159.1.1.3.2.1.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dupportGroupPerfID |
1.3.6.1.4.1.159.1.1.3.2.1.2 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| dupportPerfID |
1.3.6.1.4.1.159.1.1.3.2.1.3 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| dupportRunts |
1.3.6.1.4.1.159.1.1.3.2.1.7 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| duphmAddrTrackPortEntry |
1.3.6.1.4.1.159.1.1.4.1.1 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DuphmAddrTrackPortEntry |
|
|
| dupportHubAddrID |
1.3.6.1.4.1.159.1.1.4.1.1.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dupportGroupAddrID |
1.3.6.1.4.1.159.1.1.4.1.1.2 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| dupportAddrID |
1.3.6.1.4.1.159.1.1.4.1.1.3 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| dupportLastSourceAddress |
1.3.6.1.4.1.159.1.1.4.1.1.4 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| pgSetSuccess |
100 |
| The pgSetSuccess trap is generated by the agent upon the
successful completion of a Set Request that set the
value of the dupportadminState variable. This response
is not to be confused with the Get Response message which
is automatically generated by the agent in response to a
Set Request. This trap is used to verify at the Management
Station that Set Requests which require reliance on external
hardware have completed successfully. It is also designed to
notify other management stations monitoring the agent that a
Set Request has successfully occurred and the concentrator
configuration should be appropriately updated. |
| TRAP-TYPE |
|
|
|
| pgSetFailure |
200 |
| The pgSetFailure trap is generated by the agent upon the
unsuccessful completion of an unsuccessful Set Request that
attempted to set the value of the dupportadminState
variable. This response is not to be confused with the Get
Response message which is automatically generated by
the agent in response to a Set Request. This trap is used
to notify the Management Station of the failure of a Set
Request which has already sent a Get Response reply to the
Management Station. |
| TRAP-TYPE |
|
|
|
| pgThresholdCrossed |
300 |
| The pgThresholdCrossed trap is generated by the agent upon
recognition of a threshold being crossed as defined by the
user. The variables sent in the trap are first the rate of
the variable whose threshold has crossed and second the
threshold that has been crossed. These two variables must be
present for this trap to process correctly. Allowable variable
combinations are pgChannelIPGCount and
pgChannelIPGThreshold, pgMonPortCollRate and
pgMonPortCollThreshold, and pgMonPortErrorRate and
pgMonPortErrorThreshold. |
| TRAP-TYPE |
|
|
|
| pgHysteresisCrossed |
400 |
| The pgHysteresisCrossed trap is generated by the agent upon
recognition of a hysteresis value being crossed as defined by
the user. The trap is sent to notify the management station
that the variable has recovered from the condition that caused
the pgThresholdCrossed trap to occur. This trap will always be
preceded by a pgThresholdCrossed trap. The variables sent in
the trap are first the rate of the variable whose hysteresis
value has crossed and second the hysteresis value that has been
crossed. These two variables must be present for this trap to
process correctly. Allowable variable combinations are
pgMonPortCollRate and pgMonPortCollHysteresis, and
pgMonPortErrorRate and pgMonPortErrorHysteresis. |
| TRAP-TYPE |
|
|
|
| pgGroupMapChange |
600 |
| This trap is generated upon recognition of a change in the
group map as described in IEEE 802.3 Hub Management
Specification. The trap is sent when a change occurs in the
concentrator's group map, resulting from the insertion or
removal of a card from a concentrator. |
| TRAP-TYPE |
|
|
|
| pgSelfTestResults |
700 |
| The pgSelfTestResults trap is generated upon finding that a
command request for a selftest has completed execution. This
trap is issued on completion of a self test requested by a Set
Request. The variables in this trap include the statuses of
the object or objects that performed selftests and their
current values. There must be at least one variable for this
trap to process correctly, and there may be multiple variables.
Allowable variables are pgAgentDaughterboard,
pgAgentInternalBus, pgAgentCorrelator,
pgAgentNetPackStatus1, pgAgentNetPackStatus2,
pgAgentNetPackStatus3, pgAgentNetPackStatus4,
pgAgentNetPackStatus5,and pgAgentNetPackStatus6. |
| TRAP-TYPE |
|
|
|
| pgDaughterboardTimeout |
800 |
| The pgDaughterboardTimeout trap is sent if the communication
between the Agent Module and the Daughterboard has ceased.
This trap may only be sent if the Daughterboard is installed
on the Agent Module. |
| TRAP-TYPE |
|
|
|
| pgInternalBusTimeout |
900 |
| The pgInternalBusTimeout trap is sent if the communication
between the Agent Module Foreground and the Internal Bus has
timed out. This trap denotes a hardware failure. |
| TRAP-TYPE |
|
|
|
| pgInternalBusHardwareError |
1000 |
| The pgInternalBusHardwareError trap is sent if the response
received from the Internal Bus does not match the expected
response. The receipt of this trap signifies an Internal Bus
hardware failure. |
| TRAP-TYPE |
|
|
|
| pgOverTemperature |
1100 |
| The pgOverTemperature trap is generated upon finding that an
Over Temperature condition has been reported by the
temperature sensing mechanism in the Agent Module. |
| TRAP-TYPE |
|
|
|
| pgPowerSupplyFailure |
1200 |
| The pgPowerSupplyFailure trap is generated upon finding that
a failure has been noted in one of the Dual-Redundant Power
Supplies as reported by the Agent Module power supply sensing
mechanism. |
| TRAP-TYPE |
|
|
|
| pgErrorCondition |
1300 |
| The pgErrorCondition trap is generated upon finding that an
error condition has occurred in the Agent Module. The
variables in this trap include the object or objects that were
involved in the error and their error statuses. There must be
at least one variable for this trap to process correctly, and
there may be multiple variables. Allowable variables are
pgAgentDaughterboard, pgAgentInternalBus, pgAgentCorrelator,
pgAgentSerialPrt, pgAgentNetPackStatus1, pgAgentNetPackStatus2,
pgAgentNetPackStatus3, pgAgentNetPackStatus4,
pgAgentNetPackStatus5,and pgAgentNetPackStatus6. |
| TRAP-TYPE |
|
|
|
| pgSecurityViolation |
1400 |
| The pgSecurityViolation trap is generated upon finding that
a security violation has occurred. This proprietary security
mechanism is fully explained in the Agent Module User's
Manual. |
| TRAP-TYPE |
|
|
|
| pgHubHealth |
1500 |
| The pgHubHealth trap is generated upon finding that the health
of the concentrator or some element in it has changed. The
value of duphubHealthData and the corresponding text in
duphubHealthText notify the management station of the specific
change that has occurred. Depending on the change and the
corresponding values of duphubHealthData and duphubHealthText
the fourth variable will be either dupportAdminState or
duphubAutoPartitionState. This fourth variable provides
additional information to the management station about the
change in the system that was noted. |
| TRAP-TYPE |
|
|
|
| pgLinkStatus |
1600 |
| The pgLinkStatus is generated by the agent upon finding
that the link status of a port has changed. The variable
pgMonPortLinkStatus will hold the current link status of
the port identified by the instance. |
| TRAP-TYPE |
|
|
|
| pgMPRErrors |
1700 |
| The pgMPRErrors trap is generated by the agent to notify the
Management Station that the MPR is experiencing an error
condition. The variable pgMonGroupMPRStatus indicates
the error condition. |
| TRAP-TYPE |
|
|
|