PANDATEL-MODEM-MIB

File: PANDATEL-MODEM-MIB.mib (71928 bytes)

Imported modules

RFC-1215 RFC1155-SMI RFC1213-MIB
RFC-1212

Imported symbols

TRAP-TYPE enterprises Counter
IpAddress Gauge TimeTicks
DisplayString OBJECT-TYPE

Defined Types

RackEntry  
SEQUENCE    
  rackRack INTEGER
  rackType INTEGER
  rackDescription DisplayString
  rackModemSlots INTEGER
  rackModems INTEGER
  rackPowerSupplySlots INTEGER
  rackPowerSupplies INTEGER

ModemEntry  
SEQUENCE    
  mdmRack INTEGER
  mdmModem INTEGER
  mdmDescription DisplayString
  mdmUserName DisplayString
  mdmSelfTest INTEGER
  mdmSelfTestResult INTEGER
  mdmRemoteAccessStatus INTEGER
  mdmInterfacePorts INTEGER
  mdmLinePorts INTEGER

VerInfoEntry  
SEQUENCE    
  viRack INTEGER
  viModem INTEGER
  viType INTEGER
  viFirmwVer DisplayString
  viUnitRel DisplayString
  viArtNo DisplayString
  viFrontVer INTEGER
  viSerialNumber DisplayString

PortEntry  
SEQUENCE    
  portRack INTEGER
  portModem INTEGER
  portPort INTEGER
  portType INTEGER
  portInterfaceType INTEGER
  portConnector INTEGER
  portLoopMode INTEGER

PortSignalEntry  
SEQUENCE    
  psignalRack INTEGER
  psignalModem INTEGER
  psignalPort INTEGER
  psignalType INTEGER
  psignalStatus INTEGER
  psignalTrap INTEGER

BERTEntry  
SEQUENCE    
  bertRack INTEGER
  bertModem INTEGER
  bertPort INTEGER
  bertBERTest INTEGER
  bertStatus INTEGER
  bertRunTime Counter
  bertInErrorTime Counter
  bertErrorFreeTime Counter
  bertKbitsRecWrapped Counter
  bertKbitsReceived Counter
  bertErrors Counter
  bertSyncLosts Counter
  bertSyncStatus INTEGER
  bertBitErrorRate DisplayString

RemModemEntry  
SEQUENCE    
  rmdmRack INTEGER
  rmdmModem INTEGER
  rmdmDescription DisplayString
  rmdmUserName DisplayString
  rmdmSelfTest INTEGER
  rmdmSelfTestResult INTEGER
  rmdmRemoteAccessStatus INTEGER
  rmdmInterfacePorts INTEGER
  rmdmLinePorts INTEGER

RemVerInfoEntry  
SEQUENCE    
  rviRack INTEGER
  rviModem INTEGER
  rviType INTEGER
  rviFirmwVer DisplayString
  rviUnitRel DisplayString
  rviArtNo DisplayString
  rviFrontVer INTEGER
  rviSerialNumber DisplayString

RemPortEntry  
SEQUENCE    
  rportRack INTEGER
  rportModem INTEGER
  rportPort INTEGER
  rportType INTEGER
  rportInterfaceType INTEGER
  rportConnector INTEGER
  rportLoopMode INTEGER

RemPortSignalEntry  
SEQUENCE    
  rpsignalRack INTEGER
  rpsignalModem INTEGER
  rpsignalPort INTEGER
  rpsignalType INTEGER
  rpsignalStatus INTEGER

Defined Values

pandatel 1.3.6.1.4.1.760
OBJECT IDENTIFIER    

mibs 1.3.6.1.4.1.760.1
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.760.1.1
OBJECT IDENTIFIER    

wan-products 1.3.6.1.4.1.760.1.1.2
OBJECT IDENTIFIER    

mdm-mgmt 1.3.6.1.4.1.760.1.1.2.1
OBJECT IDENTIFIER    

mdmGroup 1.3.6.1.4.1.760.1.1.2.1.1
OBJECT IDENTIFIER    

mdmInstalledRacks 1.3.6.1.4.1.760.1.1.2.1.1.1
This is the number of currently installed modem racks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmInstalledModems 1.3.6.1.4.1.760.1.1.2.1.1.2
This is the number of currently installed modems
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmLoopModeTraps 1.3.6.1.4.1.760.1.1.2.1.1.3
This enables or disables traps generated by a Loop Mode status change at any local modem port of one of the installed modems (values: disable, enable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(2), enable(3)  

mdmCurrentDate 1.3.6.1.4.1.760.1.1.2.1.1.13
This indicate the current date as 'mm/dd/yy'. The date will be used for local management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mdmCurrentTime 1.3.6.1.4.1.760.1.1.2.1.1.14
This indicate the current time as 'hh:mm:ss'. The time will be used for local management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mdmRackTable 1.3.6.1.4.1.760.1.1.2.1.2
Table which contains information about the installed racks.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RackEntry

rackEntry 1.3.6.1.4.1.760.1.1.2.1.2.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RackEntry  

rackRack 1.3.6.1.4.1.760.1.1.2.1.2.1.1
The index of this particular modem rack in the stack. The index of the rack which contains the agent should have the number 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rackType 1.3.6.1.4.1.760.1.1.2.1.2.1.2
This entry shows the type number of the rack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), rack-10s-3hu(2), rack-12s-3hu(3), rack-10s-6hu(4), rack-6s-9s-6hu(5), device-stack-15s(6), rack-8s-4hu(7), rack-10s-2c-6hu(8), hs-rack-10s-3hu(9), rack-8s-2c-6hu(10), hs-rack-3s-1c-3hu(11), rack-1s-1c-1hu(12), rack-3s-1c-1hu(13)  

rackDescription 1.3.6.1.4.1.760.1.1.2.1.2.1.3
A verbal description of the modem rack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rackModemSlots 1.3.6.1.4.1.760.1.1.2.1.2.1.4
This entry shows the number of slots for modem cards in the rack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rackModems 1.3.6.1.4.1.760.1.1.2.1.2.1.5
This entry shows the number of modems currently installed in the rack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rackPowerSupplySlots 1.3.6.1.4.1.760.1.1.2.1.2.1.6
This entry shows the number of slots for power supplies in the rack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(999)  

rackPowerSupplies 1.3.6.1.4.1.760.1.1.2.1.2.1.7
This entry shows the number of power supplies currently installed in the rack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(999)  

mdmModemTable 1.3.6.1.4.1.760.1.1.2.1.3
Table which contains general information about the installed modems.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModemEntry

modemEntry 1.3.6.1.4.1.760.1.1.2.1.3.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ModemEntry  

mdmRack 1.3.6.1.4.1.760.1.1.2.1.3.1.1
The index of the rack where the modem is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmModem 1.3.6.1.4.1.760.1.1.2.1.3.1.2
The index of this particular modem in the rack. The value corresponds with the slot where the modem is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmDescription 1.3.6.1.4.1.760.1.1.2.1.3.1.3
A verbal description of the modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mdmUserName 1.3.6.1.4.1.760.1.1.2.1.3.1.4
A verbal description of the modem which can be changed by the manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mdmSelfTest 1.3.6.1.4.1.760.1.1.2.1.3.1.5
This entry enables the execution of a selftest. Write requests with values other than 'start' or 'cancel' will be rejected. The result will be found in mdmSelfTestResult.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(1), cancel(2)  

mdmSelfTestResult 1.3.6.1.4.1.760.1.1.2.1.3.1.6
This entry shows the result status of the last modem-dependent self test. After start, the status may change to 'running' before the first error that occured is displayed. If no error was detected the status changes to 'ok'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER started(3), running(4), ram-error(5), rom-error(6), eeprom-error(7), line-if-error(8), other-error(97), never-started(98), cancelled(99), ok(100)  

mdmRemoteAccessStatus 1.3.6.1.4.1.760.1.1.2.1.3.1.7
This entry shows the access status to the remote counterpart of the modem. The standard value depends on the device. Some remote modems are always accessible, others are not accessible or can be switched to both modes (see 'mdmForcedRemoteAccess' in the specific modem MIB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER access(2), no-access(3)  

mdmInterfacePorts 1.3.6.1.4.1.760.1.1.2.1.3.1.8
This entry indicates the number of interface ports of the modem. An interface port connects an external device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmLinePorts 1.3.6.1.4.1.760.1.1.2.1.3.1.9
This entry indicates the number of line ports of the modem. A line port connects a remote modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmVerInfoTable 1.3.6.1.4.1.760.1.1.2.1.4
Table which contains information about the installed modems' versions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VerInfoEntry

verInfoEntry 1.3.6.1.4.1.760.1.1.2.1.4.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VerInfoEntry  

viRack 1.3.6.1.4.1.760.1.1.2.1.4.1.1
The index of the rack where the modem is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

viModem 1.3.6.1.4.1.760.1.1.2.1.4.1.2
The index of this particular modem in the rack. The value corresponds with the slot where the modem is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

viType 1.3.6.1.4.1.760.1.1.2.1.4.1.3
This entry indicates the type of the modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-present(0), other(1), fhfl(101), fhfl-f(102), fhfl-s(103), gm-h(201), gm-f(202), gm-d(203), gm-s(204), gm-s-f(205), gm-d-f(206), bm-p(301), bm-z(302), gx(401), fobus(501), fx(502), fx-i(503), fx-ig(504), os(505), fx-g(506), fx-ih(507), fme(601), inax(701), emx(801), cmx-ie(802), etc(901)  

viFirmwVer 1.3.6.1.4.1.760.1.1.2.1.4.1.4
This entry indicates the firmware revision of the modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

viUnitRel 1.3.6.1.4.1.760.1.1.2.1.4.1.5
This entry indicates the hardware version and revision of the modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

viArtNo 1.3.6.1.4.1.760.1.1.2.1.4.1.6
This entry indicates the article number of the modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

viFrontVer 1.3.6.1.4.1.760.1.1.2.1.4.1.7
For factory purposes only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1)  

viSerialNumber 1.3.6.1.4.1.760.1.1.2.1.4.1.8
This entry indicates the serial number of the modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mdmPortTable 1.3.6.1.4.1.760.1.1.2.1.5
Table which contains information about all ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.760.1.1.2.1.5.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortEntry  

portRack 1.3.6.1.4.1.760.1.1.2.1.5.1.1
The index of the rack where the modem to which this port belongs is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portModem 1.3.6.1.4.1.760.1.1.2.1.5.1.2
The index of the modem to which this port belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portPort 1.3.6.1.4.1.760.1.1.2.1.5.1.3
The index of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portType 1.3.6.1.4.1.760.1.1.2.1.5.1.4
This entry indicates the type of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), interface-port(2), line-port(3), vt100-mgmt-port(4), outband-mgmt-port(5), backup-port(6)  

portInterfaceType 1.3.6.1.4.1.760.1.1.2.1.5.1.5
This entry indicates the type of interface of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), v24(2), v35(3), v36(4), x21(5), rs485(6), g703-e1t1(7), g703-e2t2(8), g703-64k(9), i430(10), store-loop(11), intercom(12), fo-e1t1(13), s0(14), hdsl(15), no-module(17), atm-26mb(18), g703-e3(19), g703-t3(20), sts-1(21), hssi(22), bm(34), g703-t1(39), g703-t2(40), eth-bridge(48), g703-e1(55), g703-e2(56), sts-3(66), stm-1(67), sm-fiber-820nm(130), sm-fiber-1300nm(131), sm-fiber-1550nm(132), mm-fiber-820nm(133), mm-fiber-1300nm(134), mm-fiber-1550nm(135), sm-fiber-1530-33nm(136), sm-fiber-1531-12nm(137), sm-fiber-1531-90nm(138), sm-fiber-1532-68nm(139), sm-fiber-1533-47nm(140), sm-fiber-1534-25nm(141), sm-fiber-1535-04nm(142), sm-fiber-1535-82nm(143), sm-fiber-1536-61nm(144), sm-fiber-1537-40nm(145), sm-fiber-1538-19nm(146), sm-fiber-1538-98nm(147), sm-fiber-1539-77nm(148), sm-fiber-1540-56nm(149), sm-fiber-1541-35nm(150), sm-fiber-1542-14nm(151), sm-fiber-1542-94nm(152), sm-fiber-1543-73nm(153), sm-fiber-1544-53nm(154), sm-fiber-1545-32nm(155), sm-fiber-1546-12nm(156), sm-fiber-1546-92nm(157), sm-fiber-1547-72nm(158), sm-fiber-1548-51nm(159), sm-fiber-1549-32nm(160), sm-fiber-1550-12nm(161), sm-fiber-1550-92nm(162), sm-fiber-1551-72nm(163), sm-fiber-1552-52nm(164), sm-fiber-1553-33nm(165), sm-fiber-1554-13nm(166), sm-fiber-1554-94nm(167), sm-fiber-1555-75nm(168), sm-fiber-1556-55nm(169), sm-fiber-1557-36nm(170), sm-fiber-1558-17nm(171), sm-fiber-1558-98nm(172), sm-fiber-1559-79nm(173), sm-fiber-1560-61nm(174), sm-fiber-1561-42nm(175), sm-fiber-1562-23nm(176), sm-fiber-1563-05nm(177), sm-fiber-1563-86nm(178), sm-fiber-1564-68nm(179), sm-fiber-1565-50nm(180), sm-1300-1550nm(181), sm-1550-1300nm(182), mm-820-1300nm(183), mm-1300-820nm(184), sm-fiber-1480nm(185), sm-fiber-1510nm(186), sm-fiber-1538nm(187), sm-fiber-1553nm(188), sm-mm-fiber-1310nm(189), missing(999)  

portConnector 1.3.6.1.4.1.760.1.1.2.1.5.1.6
This entry indicates the connector type of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), single-fiber(2), dual-fiber(3), bnc(4), dpc(5), rj45(7), ics(8), mic(9), db-9-f(10), db-9-m(11), db-15-f(12), db-15-m(13), db-25-f(14), db-25-m(15), db-37-f(16), db-37-m(17), winch-f(18), winch-m(19), mini-c(20), minimicro(21), escon(22), e2000(23), single-sc(24), single-fc(25), single-st(26), dual-sc(27), dual-fc(28), dual-st(29), single-sc-apc(30), single-fc-apc(31), dual-sc-apc(32), dual-fc-apc(33), single-lc(34), single-lc-apc(35), dual-lc(36), dual-lc-apc(37), mt-rj(38), single-sc-45(39), dual-sc-45(40), unknown(997), virtual(998), not-installed(999)  

portLoopMode 1.3.6.1.4.1.760.1.1.2.1.5.1.7
This entry indicates the loop mode of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), remote(2), digital(3), line(4), off(99)  

mdmPortSignalTable 1.3.6.1.4.1.760.1.1.2.1.6
Table which contains information about all port status signals.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortSignalEntry

portSignalEntry 1.3.6.1.4.1.760.1.1.2.1.6.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortSignalEntry  

psignalRack 1.3.6.1.4.1.760.1.1.2.1.6.1.1
The index of the rack where the modem is installed to which the port belongs that provides the signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

psignalModem 1.3.6.1.4.1.760.1.1.2.1.6.1.2
The index of the modem to which the port belongs that provides the signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

psignalPort 1.3.6.1.4.1.760.1.1.2.1.6.1.3
The index of the port that provides the signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

psignalType 1.3.6.1.4.1.760.1.1.2.1.6.1.4
This entry indicates the signal type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), link(2), rts(3), dcd(4), dtr(5), dsr(6), c(7), i(8), fsync(9), ais(10), lay1(11), bond(12), laser-status(13), ta(14), ca(15), eclk(16), laser-tx(17), laser-temp(18), cr(20), rd(26), td(27)  

psignalStatus 1.3.6.1.4.1.760.1.1.2.1.6.1.5
This entry indicates the current status of the signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3), on(4), off(5), yes(6), no(7), ok(8), fail(9), active(10), traffic(11), space(12), mark(13), high(14), low(15), sync(16)  

psignalTrap 1.3.6.1.4.1.760.1.1.2.1.6.1.6
This enables or disables traps. If Trap is enabled each transition of the signal status may cause a trap portSignalStatusGood/portSignalStatusBad.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

mdmBERTTable 1.3.6.1.4.1.760.1.1.2.1.7
Table which contains information about all performable bit error rate tests.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BERTEntry

bertEntry 1.3.6.1.4.1.760.1.1.2.1.7.1
The index of thetable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BERTEntry  

bertRack 1.3.6.1.4.1.760.1.1.2.1.7.1.1
The index of the rack where the modem is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bertModem 1.3.6.1.4.1.760.1.1.2.1.7.1.2
The index of this particular modem in the rack. The value corresponds with the slot where the modem is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bertPort 1.3.6.1.4.1.760.1.1.2.1.7.1.3
The index of the port where the BER test will be performed. The modem can only perform one test at a time. The test can only be performed on a subset of ports, usually the line ports. Write requests with different port numbers will be rejected. Write requests with valid line port numbers will be rejected while the BER test is running.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bertBERTest 1.3.6.1.4.1.760.1.1.2.1.7.1.4
This entry enables the execution of a BER test. Write requests with values other than 'start' or 'stop' will be rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(3), stop(5)  

bertStatus 1.3.6.1.4.1.760.1.1.2.1.7.1.5
This entry indicates the status of the BER test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), never-started(2), start(3), running(4), stopped(6), start-failed(7)  

bertRunTime 1.3.6.1.4.1.760.1.1.2.1.7.1.6
This entry indicates the duration of the BER test in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bertInErrorTime 1.3.6.1.4.1.760.1.1.2.1.7.1.7
This entry shows the duration of erroneous test transmission in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bertErrorFreeTime 1.3.6.1.4.1.760.1.1.2.1.7.1.8
This entry shows the duration of error-free test transmission in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bertKbitsRecWrapped 1.3.6.1.4.1.760.1.1.2.1.7.1.9
This is the number the bertKbitsReceived counter has wrapped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bertKbitsReceived 1.3.6.1.4.1.760.1.1.2.1.7.1.10
This entry indicates the number of Kbits received during the test. When the counter wraps the bertKbitRecWrapped increases by one.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bertErrors 1.3.6.1.4.1.760.1.1.2.1.7.1.11
This entry indicates the number of errors detected during the test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bertSyncLosts 1.3.6.1.4.1.760.1.1.2.1.7.1.12
This entry indicates the number of pattern sync losts detected during the test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bertSyncStatus 1.3.6.1.4.1.760.1.1.2.1.7.1.13
This entry indicates the current pattern sync status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), in-sync(2), no-sync(3)  

bertBitErrorRate 1.3.6.1.4.1.760.1.1.2.1.7.1.14
This entry indicates the bit error rate. It is provided as a string in the format 'd.ddE+/-dd'. Float scanf routines are capable of interpreting the string in the correct manner.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mdmRemoteAccess 1.3.6.1.4.1.760.1.1.2.1.9
OBJECT IDENTIFIER    

remModemTable 1.3.6.1.4.1.760.1.1.2.1.9.3
Table which contains general information about all counterparts of the installed modems.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RemModemEntry

rmodemEntry 1.3.6.1.4.1.760.1.1.2.1.9.3.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RemModemEntry  

rmdmRack 1.3.6.1.4.1.760.1.1.2.1.9.3.1.1
This entry indicates the index of the rack where the modem is installed that the remote modem is linked to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rmdmModem 1.3.6.1.4.1.760.1.1.2.1.9.3.1.2
The index of the modem that the remote modem is linked to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rmdmDescription 1.3.6.1.4.1.760.1.1.2.1.9.3.1.3
A verbal description of the remote modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rmdmUserName 1.3.6.1.4.1.760.1.1.2.1.9.3.1.4
A verbal description of the remote modem which can be changed by the manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rmdmSelfTest 1.3.6.1.4.1.760.1.1.2.1.9.3.1.5
This entry enables the execution of a selftest. Write requests with values other than 'start' or 'cancel' will be rejected. The result will be found in SelfTestResult.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(1), cancel(2)  

rmdmSelfTestResult 1.3.6.1.4.1.760.1.1.2.1.9.3.1.6
This indicates the result status of the last modem-dependent self test. After start, the status may change to 'running' before the first error that occured displays. If no error was detected the status changes to 'ok'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER started(3), running(4), ram-error(5), rom-error(6), eeprom-error(7), line-if-error(8), other-error(97), never-started(98), cancelled(99), ok(100)  

rmdmRemoteAccessStatus 1.3.6.1.4.1.760.1.1.2.1.9.3.1.7
This entry shows the access status of the modem. The standard value depends on the device. Some modems are always accessible, others are not accessible or can be switched to both modes (see 'mdmForcedRemoteAccess' in the specific modem MIB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER access(2), no-access(3)  

rmdmInterfacePorts 1.3.6.1.4.1.760.1.1.2.1.9.3.1.8
This entry indicates the number of interface ports of the remote modem. An interface port connects an external device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rmdmLinePorts 1.3.6.1.4.1.760.1.1.2.1.9.3.1.9
This entry indicates the number of line ports of the modem. A line port connects the local counterpart of the remote modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

remVerInfoTable 1.3.6.1.4.1.760.1.1.2.1.9.4
Table which contains information about the remote modems' versions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RemVerInfoEntry

remVerInfoEntry 1.3.6.1.4.1.760.1.1.2.1.9.4.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RemVerInfoEntry  

rviRack 1.3.6.1.4.1.760.1.1.2.1.9.4.1.1
The index of the rack where the modem is installed that the remote modem is linked to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rviModem 1.3.6.1.4.1.760.1.1.2.1.9.4.1.2
The index of the modem that the remote modem is linked to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rviType 1.3.6.1.4.1.760.1.1.2.1.9.4.1.3
This entry indicates the type of the remote modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-present(0), other(1), fhfl(101), fhfl-f(102), fhfl-s(103), gm-h(201), gm-f(202), gm-d(203), gm-s(204), gm-s-f(205), gm-d-f(206), bm-p(301), bm-z(302), gx(401), fobus(501), fx(502), fx-i(503), fx-ig(504), fx-g(506), fx-ih(507), fme(601), inax(701), emx(801), cmx-ie(802), etc(901)  

rviFirmwVer 1.3.6.1.4.1.760.1.1.2.1.9.4.1.4
This entry indicates the firmware revision of the remote modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rviUnitRel 1.3.6.1.4.1.760.1.1.2.1.9.4.1.5
This entry indicates the hardware version and revision of the remote modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rviArtNo 1.3.6.1.4.1.760.1.1.2.1.9.4.1.6
This entry indicates the article number of the remote modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rviFrontVer 1.3.6.1.4.1.760.1.1.2.1.9.4.1.7
For factory purposes only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1)  

rviSerialNumber 1.3.6.1.4.1.760.1.1.2.1.9.4.1.8
This entry indicates the serial number of the remote modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

remPortTable 1.3.6.1.4.1.760.1.1.2.1.9.5
Table which contains information about all ports of the remote modem.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RemPortEntry

remPortEntry 1.3.6.1.4.1.760.1.1.2.1.9.5.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RemPortEntry  

rportRack 1.3.6.1.4.1.760.1.1.2.1.9.5.1.1
The index of the rack where the local counterpart of the remote modem is installed to which this port belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rportModem 1.3.6.1.4.1.760.1.1.2.1.9.5.1.2
The index of the local counterpart of the remote modem to which this port belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rportPort 1.3.6.1.4.1.760.1.1.2.1.9.5.1.3
The index of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rportType 1.3.6.1.4.1.760.1.1.2.1.9.5.1.4
This entry indicates the type of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), interface-port(2), line-port(3), vt100-mgmt-port(4), outband-mgmt-port(5), backup-port(6)  

rportInterfaceType 1.3.6.1.4.1.760.1.1.2.1.9.5.1.5
This entry indicates the type of interface of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), v24(2), v35(3), v36(4), x21(5), rs485(6), g703-e1t1(7), g703-e2t2(8), g703-64k(9), i430(10), store-loop(11), intercom(12), fo-e1t1(13), s0(14), hdsl(15), no-module(17), atm-26mb(18), g703-e3(19), g703-t3(20), sts-1(21), hssi(22), bm(34), g703-t1(39), g703-t2(40), eth-bridge(48), g703-e1(55), g703-e2(56), sts-3(66), stm-1(67), sm-fiber-820nm(130), sm-fiber-1300nm(131), sm-fiber-1550nm(132), mm-fiber-820nm(133), mm-fiber-1300nm(134), mm-fiber-1550nm(135), sm-fiber-1530-33nm(136), sm-fiber-1531-12nm(137), sm-fiber-1531-90nm(138), sm-fiber-1532-68nm(139), sm-fiber-1533-47nm(140), sm-fiber-1534-25nm(141), sm-fiber-1535-04nm(142), sm-fiber-1535-82nm(143), sm-fiber-1536-61nm(144), sm-fiber-1537-40nm(145), sm-fiber-1538-19nm(146), sm-fiber-1538-98nm(147), sm-fiber-1539-77nm(148), sm-fiber-1540-56nm(149), sm-fiber-1541-35nm(150), sm-fiber-1542-14nm(151), sm-fiber-1542-94nm(152), sm-fiber-1543-73nm(153), sm-fiber-1544-53nm(154), sm-fiber-1545-32nm(155), sm-fiber-1546-12nm(156), sm-fiber-1546-92nm(157), sm-fiber-1547-72nm(158), sm-fiber-1548-51nm(159), sm-fiber-1549-32nm(160), sm-fiber-1550-12nm(161), sm-fiber-1550-92nm(162), sm-fiber-1551-72nm(163), sm-fiber-1552-52nm(164), sm-fiber-1553-33nm(165), sm-fiber-1554-13nm(166), sm-fiber-1554-94nm(167), sm-fiber-1555-75nm(168), sm-fiber-1556-55nm(169), sm-fiber-1557-36nm(170), sm-fiber-1558-17nm(171), sm-fiber-1558-98nm(172), sm-fiber-1559-79nm(173), sm-fiber-1560-61nm(174), sm-fiber-1561-42nm(175), sm-fiber-1562-23nm(176), sm-fiber-1563-05nm(177), sm-fiber-1563-86nm(178), sm-fiber-1564-68nm(179), sm-fiber-1565-50nm(180), sm-1300-1550nm(181), sm-1550-1300nm(182), mm-820-1300nm(183), mm-1300-820nm(184), sm-fiber-1480nm(185), sm-fiber-1510nm(186), sm-fiber-1538nm(187), sm-fiber-1553nm(188), sm-mm-fiber-1310nm(189), missing(999)  

rportConnector 1.3.6.1.4.1.760.1.1.2.1.9.5.1.6
This entry indicates the connector type of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), single-fiber(2), dual-fiber(3), bnc(4), dpc(5), rj45(7), ics(8), mic(9), db-9-f(10), db-9-m(11), db-15-f(12), db-15-m(13), db-25-f(14), db-25-m(15), db-37-f(16), db-37-m(17), winch-f(18), winch-m(19), mini-c(20), minimicro(21), escon(22), e2000(23), single-sc(24), single-fc(25), single-st(26), dual-sc(27), dual-fc(28), dual-st(29), single-sc-apc(30), single-fc-apc(31), dual-sc-apc(32), dual-fc-apc(33), single-lc(34), single-lc-apc(35), dual-lc(36), dual-lc-apc(37), mt-rj(38), single-sc-45(39), dual-sc-45(40), unknown(997), virtual(998), not-installed(999)  

rportLoopMode 1.3.6.1.4.1.760.1.1.2.1.9.5.1.7
This entry indicates the loop mode of the port (remote, digital, line, off).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), remote(2), digital(3), line(4), off(99)  

remPortSignalTable 1.3.6.1.4.1.760.1.1.2.1.9.6
Table which contains information about all port status signals.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RemPortSignalEntry

remPortSignalEntry 1.3.6.1.4.1.760.1.1.2.1.9.6.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RemPortSignalEntry  

rpsignalRack 1.3.6.1.4.1.760.1.1.2.1.9.6.1.1
The index of the rack where the local counterpart of the remote modem is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rpsignalModem 1.3.6.1.4.1.760.1.1.2.1.9.6.1.2
The index of the local counterpart of the remote modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rpsignalPort 1.3.6.1.4.1.760.1.1.2.1.9.6.1.3
The index of the port at the remote modem that provides the signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rpsignalType 1.3.6.1.4.1.760.1.1.2.1.9.6.1.4
This entry indicates the signal type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), link(2), rts(3), dcd(4), dtr(5), dsr(6), c(7), i(8), fsync(9), ais(10), lay1(11), bond(12), laser-status(13), ta(14), ca(15), eclk(16), laser-tx(17), laser-temp(18), cr(20), rd(26), td(27)  

rpsignalStatus 1.3.6.1.4.1.760.1.1.2.1.9.6.1.5
This entry indicates the current status of the signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3), on(4), off(5), yes(6), no(7), ok(8), fail(9), active(10), traffic(11), space(12), mark(13), high(14), low(15), sync(16)  

mdmSpecifics 1.3.6.1.4.1.760.1.1.2.1.10
OBJECT IDENTIFIER    

mdmMgmtIfGroup 1.3.6.1.4.1.760.1.1.2.1.20
OBJECT IDENTIFIER    

mdmIfType 1.3.6.1.4.1.760.1.1.2.1.20.1
This variable shows the agent's interface type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), v24(2), v35(4), x21(5), ethernet(6), missing(999)  

mdmIfProtocol 1.3.6.1.4.1.760.1.1.2.1.20.2
This variable shows the agent's protocol type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), slip(2), ppp-async(3), ppp-sync(4), ethernetII(5)  

mdmIfDataRate 1.3.6.1.4.1.760.1.1.2.1.20.3
This variable shows the agent's data rate in bps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmIfDialEnable 1.3.6.1.4.1.760.1.1.2.1.20.4
This variable enables the initialization of a dial modem in case of alarm. The following variables (5 to 10) are active only if this variable is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

mdmIfInitString 1.3.6.1.4.1.760.1.1.2.1.20.5
This variable defines an init string which is generated in case of alarm to configure an external Hayes compatible modem.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mdmIfDialString 1.3.6.1.4.1.760.1.1.2.1.20.6
This variable defines a modem command which is generated in case of alarm to dial-up a remote NMS station. If the dial string is not defined neither the init string nor the dial string is generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mdmIfSendTTL 1.3.6.1.4.1.760.1.1.2.1.20.7
This variable defines the TTL (time to live) in seconds. After that time the generated traps will be deleted from the buffer. If the value is '0' the traps will remain in the buffer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mdmIfDialTimeout 1.3.6.1.4.1.760.1.1.2.1.20.8
This variable defines a dial timeout for the modem in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mdmIfRedialPause 1.3.6.1.4.1.760.1.1.2.1.20.9
This variable defines the duration of a redial pause in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mdmIfIdlePeriodBeforeDisconnect 1.3.6.1.4.1.760.1.1.2.1.20.10
This variable defines the period of time before disconnecting in seconds. If the value is '0' the modem will remain connected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rackAdded 1
This trap will be sent when a rack is added to the managed chassis. The rack index of the new rack is sent along with this trap.
TRAP-TYPE    

rackRemoved 2
This trap will be sent when a rack is removed from the managed chassis. The rack index of the removed rack is sent along with this trap.
TRAP-TYPE    

modemAdded 3
This trap will be sent when a modem is added. The rack number and the index of the new modem is sent along with this trap.
TRAP-TYPE    

modemRemoved 4
This trap will be sent when a modem in one of the slots is removed. The rack number and the index of the removed modem is sent along with this trap.
TRAP-TYPE    

portLoopEnabled 5
This trap will be sent when a modem in one of the slots enables a Loop. The rack number, index of the modem, and port number is sent along with this trap.
TRAP-TYPE    

portLoopDisabled 6
This trap will be sent when a modem in one of the slots disables a Loop. The rack number, index of the modem, and port number is sent along with this trap.
TRAP-TYPE    

portSignalStatusGood 7
This will be sent when a status signal of a modem port enters the 'good' status. The rack number, index of the modem, and port number is sent along with this trap.
TRAP-TYPE    

portSignalStatusBad 8
This trap will be sent when a status signal of a modem port enters the 'bad' status. The rack number, index of the modem, and port number is sent along with this trap.
TRAP-TYPE    

portBackupEnabled 9
This trap will be sent when a modem in one of the slots enters a backup status. The first port indicates the active data port, the second the inactive port. The rack number, index of the modem, and port number is sent along with this trap.
TRAP-TYPE    

portBackupDisabled 10
This trap will be sent when a modem in one of the slots leaves a backup status. The first port indicates the active data port, the second the inactive port. The rack number, index of the modem, and port number is sent along with this trap.
TRAP-TYPE    

portBackupAvailable 11
This trap will be sent when a second link can be used as backup. The rack number, index of the modem, and port number is sent along with this trap.
TRAP-TYPE    

portBackupNotAvailable 12
This trap will be sent when there is no second link available as backup. The rack number, index of the modem, and port number is sent along with this trap.
TRAP-TYPE    

portDataPortChanged 13
This trap will be sent when the line port used for data transmission is changed. The first port indicates the active data port, the second the inactive port. The rack number, index of the modem, and port number is sent along with this trap.
TRAP-TYPE    

mdm-oid 1.3.6.1.4.1.760.1.1.2.1.10.10000
OBJECT IDENTIFIER    

comp-id 1.3.6.1.4.1.760.1.1.2.1.10.10000.1
OBJECT IDENTIFIER    

device-id 1.3.6.1.4.1.760.1.1.2.1.10.10000.2
OBJECT IDENTIFIER    

slot-id 1.3.6.1.4.1.760.1.1.2.1.10.10000.3
OBJECT IDENTIFIER    

port-id 1.3.6.1.4.1.760.1.1.2.1.10.10000.4
OBJECT IDENTIFIER    

psupply-id 1.3.6.1.4.1.760.1.1.2.1.10.10000.5
OBJECT IDENTIFIER    

psonoff-id 1.3.6.1.4.1.760.1.1.2.1.10.10000.6
OBJECT IDENTIFIER    

fanonoff-id 1.3.6.1.4.1.760.1.1.2.1.10.10000.7
OBJECT IDENTIFIER    

rack-other 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.1
OBJECT IDENTIFIER    

rack-10s-3hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.2
OBJECT IDENTIFIER    

rack-12s-3hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.3
OBJECT IDENTIFIER    

rack-10s-6hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.4
OBJECT IDENTIFIER    

rack-6s-9s-6hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.5
OBJECT IDENTIFIER    

device-stack-15s 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.6
OBJECT IDENTIFIER    

rack-8s-4hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.7
OBJECT IDENTIFIER    

rack-10s-2c-6hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.8
OBJECT IDENTIFIER    

hs-rack-10s-3hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.9
OBJECT IDENTIFIER    

rack-8s-2c-6hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.10
OBJECT IDENTIFIER    

hs-rack-3s-1c-3hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.11
OBJECT IDENTIFIER    

rack-1s-1c-1hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.12
OBJECT IDENTIFIER    

rack-3s-1c-1hu 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.13
OBJECT IDENTIFIER    

otherModem 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.1
OBJECT IDENTIFIER    

cms-snmp-master 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10001
OBJECT IDENTIFIER    

cms-slave 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10002
OBJECT IDENTIFIER    

cms-intelligent-slave 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10003
OBJECT IDENTIFIER    

rc-control 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10004
OBJECT IDENTIFIER    

modemSlot 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.1
OBJECT IDENTIFIER    

mgmtSlot 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.2
OBJECT IDENTIFIER    

modemAddr 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.3
OBJECT IDENTIFIER    

mgmtAddr 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.4
OBJECT IDENTIFIER    

wdmSlot 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.5
OBJECT IDENTIFIER    

controlSlot 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.6
OBJECT IDENTIFIER    

psupplySlot 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.10
OBJECT IDENTIFIER    

otherPort 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.1
OBJECT IDENTIFIER    

interfacePort 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.2
OBJECT IDENTIFIER    

linePort 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.3
OBJECT IDENTIFIER    

vt100mgmtPort 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.4
OBJECT IDENTIFIER    

outbandmgmtPort 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.5
OBJECT IDENTIFIER    

backupPort 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.6
OBJECT IDENTIFIER    

rs485Port 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.7
OBJECT IDENTIFIER    

ps-other 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.1
OBJECT IDENTIFIER    

p-ac-x-5v-20a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.2
OBJECT IDENTIFIER    

p-ac-x-5v-30a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.3
OBJECT IDENTIFIER    

p-dc-48v-5v-18a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.4
OBJECT IDENTIFIER    

p-dc-24v-5v-15a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.5
OBJECT IDENTIFIER    

p-dc-48v-5v-30a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.6
OBJECT IDENTIFIER    

b-ac-x-5v-6a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.7
OBJECT IDENTIFIER    

b-dc-48v-5v-lc 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.8
OBJECT IDENTIFIER    

b-dc-48v-5v-hc 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.9
OBJECT IDENTIFIER    

b-dc-24v-5v-su 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.10
OBJECT IDENTIFIER    

p-ac-x-3v-20a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.11
OBJECT IDENTIFIER    

p-dc-48v-5v-20a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.12
OBJECT IDENTIFIER    

p-dc-5v-3v-4a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.13
OBJECT IDENTIFIER    

p-dc-5v-5v-5a 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.14
OBJECT IDENTIFIER    

pS1-PS2-other 1.3.6.1.4.1.760.1.1.2.1.10.10000.6.1
OBJECT IDENTIFIER    

pS1-on-PS2-off 1.3.6.1.4.1.760.1.1.2.1.10.10000.6.2
OBJECT IDENTIFIER    

pS1-on-PS2-on 1.3.6.1.4.1.760.1.1.2.1.10.10000.6.3
OBJECT IDENTIFIER    

fAN1-FAN2-other 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.1
OBJECT IDENTIFIER    

fAN1-off-FAN2-off 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.2
OBJECT IDENTIFIER    

fAN1-on-FAN2-off 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.3
OBJECT IDENTIFIER    

fAN1-off-FAN2-on 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.4
OBJECT IDENTIFIER    

fAN1-on-FAN2-on 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.5
OBJECT IDENTIFIER