PAIRGAIN-ETHERPHONE-MIB

File: PAIRGAIN-ETHERPHONE-MIB.mib (26954 bytes)

Imported modules

Imported symbols

Counter	OBJECT-TYPE	pgEPhoneLocUnit
pgEPhoneRemUnit

Defined Types

TempPgUnitType
INTEGER	empty(1), other(2), cmu(3), clu(4), clu-T1-V35(5), clu-384-V35(6), clu-DSX(7), clu-T1-449(8), clu-Flex(9), clu-E1-V35(10), clu-E1-449(11), clu-G703(12), clu-G120(13), clu-X21(14), cu-T1-V35(15), cu-384-V35(16), cu-DSX(17), cu-T1-449(18), cu-Flex(19), cu-E1-V35(20), cu-E1-449(21), cu-G703(22), cu-G120(23), cu-X21(24), cu-DBL(25), hmu(26), hlu(27), ps-AC(28), ps-DC(29), clu-384-449(30), cu-384-449(31), clu-REX-T1(32), cu-REX-T1(33), clu-REX-E1(34), cu-REX-E1(35), clu-REX-384(36), cu-REX-384(37), clu-MM768(38), cu-MM768(39), mm-220(40), mm-768(41), eph-220(42), epw-220(43), eph-remote(44), eph-RT(45)

PgLocUnitEpEntry
SEQUENCE
	pgLocUnitEpIndex	INTEGER
	pgLocUnitEpUnitType	TempPgUnitType
	pgLocUnitEpHwConfig	INTEGER
	pgLocUnitEpXcvrType	INTEGER
	pgLocUnitEpAFE	INTEGER
	pgLocUnitEpDS0IdleCode	INTEGER
	pgLocUnitEpPOTSDS0Alloc	INTEGER
	pgLocUnitEpEthernetDS0Alloc	INTEGER
	pgLocUnitEpPOTSType	INTEGER
	pgLocUnitEpPOTSEnable1	INTEGER
	pgLocUnitEpPOTSEnable2	INTEGER
	pgLocUnitEpPOTSStatus1	INTEGER
	pgLocUnitEpPOTSStatus2	INTEGER
	pgLocUnitEpBridgeSWVer	INTEGER
	pgLocUnitEpERateMultiplier	INTEGER
	pgLocUnitEpMACAddr	OCTET STRING
	pgLocUnitEpSpanTreeMode	INTEGER
	pgLocUnitEpEncapMode	INTEGER
	pgLocUnitEp10BaseTLinkStatus	INTEGER
	pgLocUnitEp10BaseTLinkAlarmMode	INTEGER
	pgLocUnitEpEPortInFrames	Counter
	pgLocUnitEpEPortOutFrames	Counter
	pgLocUnitEpEPortInDiscards	Counter
	pgLocUnitEpEPortInErrors	Counter
	pgLocUnitEpDSLPortInFrames	Counter
	pgLocUnitEpDSLPortOutFrames	Counter
	pgLocUnitEpDSLPortInDiscards	Counter
	pgLocUnitEpDSLPortInErrors	Counter

PgRemUnitEpEntry
SEQUENCE
	pgRemUnitEpIndex	INTEGER
	pgRemUnitEpUnitType	TempPgUnitType
	pgRemUnitEpHwConfig	INTEGER
	pgRemUnitEpXcvrType	INTEGER
	pgRemUnitEpAFE	INTEGER
	pgRemUnitEpDS0IdleCode	INTEGER
	pgRemUnitEpPOTSDS0Alloc	INTEGER
	pgRemUnitEpEthernetDS0Alloc	INTEGER
	pgRemUnitEpPOTSType	INTEGER
	pgRemUnitEpPOTSEnable1	INTEGER
	pgRemUnitEpPOTSEnable2	INTEGER
	pgRemUnitEpPOTSStatus1	INTEGER
	pgRemUnitEpPOTSStatus2	INTEGER
	pgRemUnitEpBridgeSWVer	INTEGER
	pgRemUnitEpERateMultiplier	INTEGER
	pgRemUnitEpMACAddr	OCTET STRING
	pgRemUnitEpSpanTreeMode	INTEGER
	pgRemUnitEpEncapMode	INTEGER
	pgRemUnitEp10BaseTLinkStatus	INTEGER
	pgRemUnitEp10BaseTLinkAlarmMode	INTEGER
	pgRemUnitEpEPortInFrames	Counter
	pgRemUnitEpEPortOutFrames	Counter
	pgRemUnitEpEPortInDiscards	Counter
	pgRemUnitEpEPortInErrors	Counter
	pgRemUnitEpDSLPortInFrames	Counter
	pgRemUnitEpDSLPortOutFrames	Counter
	pgRemUnitEpDSLPortInDiscards	Counter
	pgRemUnitEpDSLPortInErrors	Counter

Defined Values

pgLocUnitEpTable		1.3.6.1.4.1.927.1.8.2.1
The Local Unit EtherPhone table. This table contains an entry for each EtherPhone/MegabitModem 220 line unit in the chassis. The attributes in this table decribe parameters associated with each Local Line Unit.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PgLocUnitEpEntry

pgLocUnitEpEntry		1.3.6.1.4.1.927.1.8.2.1.1
Entries in the Local Unit Port Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PgLocUnitEpEntry

pgLocUnitEpIndex		1.3.6.1.4.1.927.1.8.2.1.1.1
Index of the EtherPhone Local Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pgLocUnitEpUnitType		1.3.6.1.4.1.927.1.8.2.1.1.2
The type of Unit this entry represents.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TempPgUnitType

pgLocUnitEpHwConfig		1.3.6.1.4.1.927.1.8.2.1.1.3
Major hardware configuration of the unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pgLocUnitEpXcvrType		1.3.6.1.4.1.927.1.8.2.1.1.4
The transceiver type of the unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hybrid768(1), hybrid384(2), hybrid256(3), afe(4)

pgLocUnitEpAFE		1.3.6.1.4.1.927.1.8.2.1.1.5
For variable rate(AFE) transceiver type, this object is used to set the rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

pgLocUnitEpDS0IdleCode		1.3.6.1.4.1.927.1.8.2.1.1.6
Code inserts into all DS0 Channels that are not assigned to either POTS line or the Ethernet port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

pgLocUnitEpPOTSDS0Alloc		1.3.6.1.4.1.927.1.8.2.1.1.7
Number of DS0 channels allocated to POTS line.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

pgLocUnitEpEthernetDS0Alloc		1.3.6.1.4.1.927.1.8.2.1.1.8
Number of DS0 channels allocated to Ethernet port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

pgLocUnitEpPOTSType		1.3.6.1.4.1.927.1.8.2.1.1.9
This object indicates what kind of POTS card is installed, and how many POTS lines are available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noPOT(1), fxO1(2), fxS1(3), fxO2(4), fxS2(5)

pgLocUnitEpPOTSEnable1		1.3.6.1.4.1.927.1.8.2.1.1.10
This object enables or disables POTS 1 line.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

pgLocUnitEpPOTSEnable2		1.3.6.1.4.1.927.1.8.2.1.1.11
This object enables or disables POTS 2 line.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

pgLocUnitEpPOTSStatus1		1.3.6.1.4.1.927.1.8.2.1.1.12
This object represents the status of POTS 1 line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	undefined(1), ring(2), on-hook(3), lcfo(4), off-hook(5)

pgLocUnitEpPOTSStatus2		1.3.6.1.4.1.927.1.8.2.1.1.13
This object represents the status of POTS 2 line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	undefined(1), ring(2), on-hook(3), lcfo(4), off-hook(5)

pgLocUnitEpBridgeSWVer		1.3.6.1.4.1.927.1.8.2.1.1.14
This object represents the bridge's software version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pgLocUnitEpERateMultiplier		1.3.6.1.4.1.927.1.8.2.1.1.15
This object sets the DS0 channels allocated to the Ethernet port operate as 56Kbps or 64Kbps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	r56(1), r64(2)

pgLocUnitEpMACAddr		1.3.6.1.4.1.927.1.8.2.1.1.16
This object represents the Ethernet MAC address of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

pgLocUnitEpSpanTreeMode		1.3.6.1.4.1.927.1.8.2.1.1.17
This object enables/disables the spanning tree mode of the bridge.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

pgLocUnitEpEncapMode		1.3.6.1.4.1.927.1.8.2.1.1.18
This object sets the encapsulation mode to HDLS or PPP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	hdlc(1), ppp(2)

pgLocUnitEp10BaseTLinkStatus		1.3.6.1.4.1.927.1.8.2.1.1.19
This object represents the Ethernet 10BaseT link status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	link-down(1), link-up(2), other(3)

pgLocUnitEp10BaseTLinkAlarmMode		1.3.6.1.4.1.927.1.8.2.1.1.20
This object is used to enable/disable 10BaseT link alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

pgLocUnitEpEPortInFrames		1.3.6.1.4.1.927.1.8.2.1.1.21
This object represents the count of received frames of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgLocUnitEpEPortOutFrames		1.3.6.1.4.1.927.1.8.2.1.1.22
This object represents the count of transmitted frames of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgLocUnitEpEPortInDiscards		1.3.6.1.4.1.927.1.8.2.1.1.23
This object represents the count of discarded frames of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgLocUnitEpEPortInErrors		1.3.6.1.4.1.927.1.8.2.1.1.24
This object represents the count of frames with errors of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgLocUnitEpDSLPortInFrames		1.3.6.1.4.1.927.1.8.2.1.1.25
This object represents the count of received frames of the DSL port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgLocUnitEpDSLPortOutFrames		1.3.6.1.4.1.927.1.8.2.1.1.26
This object represents the count of transmitted frames of the DSL port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgLocUnitEpDSLPortInDiscards		1.3.6.1.4.1.927.1.8.2.1.1.27
This object represents the count of discarded frames of the DSL port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgLocUnitEpDSLPortInErrors		1.3.6.1.4.1.927.1.8.2.1.1.28
This object represents the count of frames with errors of the DSL port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgRemUnitEpTable		1.3.6.1.4.1.927.1.8.3.1
The Remote Unit EtherPhone table. This table contains an entry for each EtherPhone/MegabitModem 220 line unit in the chassis. The attributes in this table decribe parameters associated with each Remote Line Unit.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PgRemUnitEpEntry

pgRemUnitEpEntry		1.3.6.1.4.1.927.1.8.3.1.1
Entries in the Remote Unit Port Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PgRemUnitEpEntry

pgRemUnitEpIndex		1.3.6.1.4.1.927.1.8.3.1.1.1
Index of the EtherPhone Remote Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pgRemUnitEpUnitType		1.3.6.1.4.1.927.1.8.3.1.1.2
The type of Unit this entry represents.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TempPgUnitType

pgRemUnitEpHwConfig		1.3.6.1.4.1.927.1.8.3.1.1.3
Major hardware configuration of the unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pgRemUnitEpXcvrType		1.3.6.1.4.1.927.1.8.3.1.1.4
The transceiver type of the unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hybrid768(1), hybrid384(2), hybrid256(3), afe(4)

pgRemUnitEpAFE		1.3.6.1.4.1.927.1.8.3.1.1.5
For variable rate(AFE) transceiver type, this object is used to set the rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

pgRemUnitEpDS0IdleCode		1.3.6.1.4.1.927.1.8.3.1.1.6
Code inserts into all DS0 Channels that are not assigned to either POTS line or the Ethernet port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

pgRemUnitEpPOTSDS0Alloc		1.3.6.1.4.1.927.1.8.3.1.1.7
Number of DS0 channels allocated to POTS line.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

pgRemUnitEpEthernetDS0Alloc		1.3.6.1.4.1.927.1.8.3.1.1.8
Number of DS0 channels allocated to Ethernet port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

pgRemUnitEpPOTSType		1.3.6.1.4.1.927.1.8.3.1.1.9
This object indicates what kind of POTS card is installed, and how many POTS lines are available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noPOT(1), fxO1(2), fxS1(3), fxO2(4), fxS2(5)

pgRemUnitEpPOTSEnable1		1.3.6.1.4.1.927.1.8.3.1.1.10
This object enables or disables POTS 1 line.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

pgRemUnitEpPOTSEnable2		1.3.6.1.4.1.927.1.8.3.1.1.11
This object enables or disables POTS 2 line.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

pgRemUnitEpPOTSStatus1		1.3.6.1.4.1.927.1.8.3.1.1.12
This object represents the status of POTS 1 line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	undefined(1), ring(2), on-hook(3), lcfo(4), off-hook(5)

pgRemUnitEpPOTSStatus2		1.3.6.1.4.1.927.1.8.3.1.1.13
This object represents the status of POTS 2 line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	undefined(1), ring(2), on-hook(3), lcfo(4), off-hook(5)

pgRemUnitEpBridgeSWVer		1.3.6.1.4.1.927.1.8.3.1.1.14
This object represents the bridge's software version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pgRemUnitEpERateMultiplier		1.3.6.1.4.1.927.1.8.3.1.1.15
This object sets the DS0 channels allocated to the Ethernet port operate as 56Kbps or 64Kbps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	r56(1), r64(2)

pgRemUnitEpMACAddr		1.3.6.1.4.1.927.1.8.3.1.1.16
This object represents the Ethernet MAC address of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

pgRemUnitEpSpanTreeMode		1.3.6.1.4.1.927.1.8.3.1.1.17
This object enables/disables the spanning tree mode of the bridge.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

pgRemUnitEpEncapMode		1.3.6.1.4.1.927.1.8.3.1.1.18
This object sets the encapsulation mode to HDLS or PPP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	hdlc(1), ppp(2)

pgRemUnitEp10BaseTLinkStatus		1.3.6.1.4.1.927.1.8.3.1.1.19
This object represents the Ethernet 10BaseT link status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	link-down(1), link-up(2), other(3)

pgRemUnitEp10BaseTLinkAlarmMode		1.3.6.1.4.1.927.1.8.3.1.1.20
This object is used to enable/disable the 10BaseT link alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

pgRemUnitEpEPortInFrames		1.3.6.1.4.1.927.1.8.3.1.1.21
This object represents the count of received frames of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgRemUnitEpEPortOutFrames		1.3.6.1.4.1.927.1.8.3.1.1.22
This object represents the count of transmitted frames of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgRemUnitEpEPortInDiscards		1.3.6.1.4.1.927.1.8.3.1.1.23
This object represents the count of discarded frames of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgRemUnitEpEPortInErrors		1.3.6.1.4.1.927.1.8.3.1.1.24
This object represents the count of frames with errors of the Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgRemUnitEpDSLPortInFrames		1.3.6.1.4.1.927.1.8.3.1.1.25
This object represents the count of received frames of the DSL port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgRemUnitEpDSLPortOutFrames		1.3.6.1.4.1.927.1.8.3.1.1.26
This object represents the count of transmitted frames of the DSL port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgRemUnitEpDSLPortInDiscards		1.3.6.1.4.1.927.1.8.3.1.1.27
This object represents the count of discarded frames of the DSL port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pgRemUnitEpDSLPortInErrors		1.3.6.1.4.1.927.1.8.3.1.1.28
This object represents the count of frames with errors of the DSL port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter