PAIRGAIN-DSLAM-CHASSIS-MIB

File: PAIRGAIN-DSLAM-CHASSIS-MIB.mib (20990 bytes)

Imported modules

SNMPv2-TC RFC1155-SMI RFC-1212
PAIRGAIN-COMMON-HD-MIB

Imported symbols

TEXTUAL-CONVENTION Counter TimeTicks
OBJECT-TYPE pgDSLAMChassis

Defined Types

TimeSeconds  
The value of the pgDSLAMCalendarTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type.
TEXTUAL-CONVENTION    
  INTEGER 0..4294967295  

DisplayString  
OCTET STRING    

PgDSLAMChassisType  
INTEGER unknown(1), dslam-co(2), dslam-as5(3), dslam-as3(4)    

PgDSLAMUnitType  
INTEGER unknown(1), management(2), adsl-cap-frame-8(3), adsl-dmt-frame-8(4), adsl-cap-frame-12(5), adsl-dmt-frame-12(6), hdsl-frame-16(7), hdsl-frame-24(8), adsl-cap-cell-8(9), adsl-dmt-cell-8(10), adsl-cap-cell-12(11), adsl-dmt-cell-12(12), atm-oc3-channel-6(13), t1-circuit-emul-12(14), e1-circuit-emul-12(15), ds3-circuit-emul-6(16), e3-circuit-emul-6(17), t1-higain-lu-12(18), atm-oc3-channel(40), t1-dsx1-channel(41), e1-atm-imux-8-channel(42), sdsl-frame-16(43), sdsl-frame-24(44), ds3-atm-channel(45), idsl-frame-24(46), sdsl-cell-24(47), atm-oc3-line(19), ds3-atm-line(20), e3-atm-line(21), ds3-fr-line(22), e3-fr-line(23), ethernet-10-100(24), t1-atm-imux-6(25), e1-atm-imux-6(26), t1-fr-imux-6(27), e1-fr-imux-6(28), atm-oc12-line(29), hissi-line(30), t1-dsx1-line(50), e1-atm-imux-8-line(51), t1-dsx1-linemgmt(52), pot-splitter(53), adsl-cap-frame-test(31), adsl-dmt-frame-test(32), sdsl-frame-test(33), adsl-cap-cell-test(34), adsl-dmt-cell-test(35), sdsl-cell-test(36), circuit-emul-test(37), fr-line-test(38), cell-line-test(39)    

PgDSLAMSlotConfigEntry  
SEQUENCE    
  pgDSLAMSlotNumber INTEGER
  pgDSLAMSlotUnitType PgDSLAMUnitType
  pgDSLAMSlotUnitSerialNo DisplayString
  pgDSLAMSlotUnitDescr DisplayString
  pgDSLAMSlotHwVer DisplayString Size(10)
  pgDSLAMSlotFwVer DisplayString Size(10)
  pgDSLAMSlotSwVer DisplayString Size(10)
  pgDSLAMSlotBoardReset INTEGER
  pgDSLAMSlotNmCntlStatus INTEGER
  pgDSLAMSlotIfNumber INTEGER
  pgDSLAMSlotHwID DisplayString Size(32)

DSLAMAlarmStatEntry  
SEQUENCE    
  pgDSLAMAlarmCardID INTEGER
  pgDSLAMAlarmPortNum INTEGER
  pgDSLAMAlarmStatSeverity INTEGER
  pgDSLAMAlarmTrapOID OBJECT IDENTIFIER

DSLAMSLOTStatEntry  
SEQUENCE    
  pgDSLAMSlotID INTEGER
  pgDSLAMSlotStatus INTEGER

PgDSLAMFileDirectoryEntry  
SEQUENCE    
  pgDSLAMFileDirectorySlotID INTEGER
  pgDSLAMFileDirectory OCTET STRING Size(0..2047)

Defined Values

pgDSLAMChassisType 1.3.6.1.4.1.927.1.9.1.1
The chassis type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PgDSLAMChassisType  

pgDSLAMChassisPsStatus 1.3.6.1.4.1.927.1.9.1.2
The chassis power supply status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), oneFail(2), bothFail(3), ok(4)  

pgDSLAMChassisFanStatus 1.3.6.1.4.1.927.1.9.1.3
The status of the chassis cooling fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), fail(2), ok(3), hightemp(4)  

pgDSLAMSlotConfigTable 1.3.6.1.4.1.927.1.9.1.4
The DSLAM chassis slot configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PgDSLAMSlotConfigEntry

pgDSLAMSlotConfigEntry 1.3.6.1.4.1.927.1.9.1.4.1
Entry in the DSLAM slot configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PgDSLAMSlotConfigEntry  

pgDSLAMSlotNumber 1.3.6.1.4.1.927.1.9.1.4.1.1
The chassis slot number. Valid entries are 1-21. The slots are numbered from left to right from 1-21. The DMU is always located in slot 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

pgDSLAMSlotUnitType 1.3.6.1.4.1.927.1.9.1.4.1.2
The type of Unit this entry represents.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PgDSLAMUnitType  

pgDSLAMSlotUnitSerialNo 1.3.6.1.4.1.927.1.9.1.4.1.3
Serial number of the Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(12)  

pgDSLAMSlotUnitDescr 1.3.6.1.4.1.927.1.9.1.4.1.4
Unit description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

pgDSLAMSlotHwVer 1.3.6.1.4.1.927.1.9.1.4.1.5
The hardware revision of the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(10)  

pgDSLAMSlotFwVer 1.3.6.1.4.1.927.1.9.1.4.1.6
The firmware revision of the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(10)  

pgDSLAMSlotSwVer 1.3.6.1.4.1.927.1.9.1.4.1.7
The software revision of the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(10)  

pgDSLAMSlotBoardReset 1.3.6.1.4.1.927.1.9.1.4.1.8
This indicates the reset state of the board. Writing with the value reset (2) will reset the board.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noReset(1), reset(2)  

pgDSLAMSlotNmCntlStatus 1.3.6.1.4.1.927.1.9.1.4.1.9
Tells whether the board is under network management control.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), nmControl(2), testControl(3), notNmControl(4)  

pgDSLAMSlotIfNumber 1.3.6.1.4.1.927.1.9.1.4.1.10
The number of MIB-II ifEntry maintained by this board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pgDSLAMSlotHwID 1.3.6.1.4.1.927.1.9.1.4.1.11
The hardware identification number of the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(32)  

pgDSLAMConfigChangeCnts 1.3.6.1.4.1.927.1.9.1.5
The number of times a physical configuration change has taken place in the chassis such as the insertion/deinsertion of a Unit. Any events causing a change in the pgDSLAMSlotConfigTable or the pgDSLAMCommonBoardTable should cause this counter to be incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pgDSLAMConfigLastChange 1.3.6.1.4.1.927.1.9.1.6
The value of sysUpTime at the time the most recent physical configuration change occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

pgDSLAMChassisAlarmStatTable 1.3.6.1.4.1.927.1.9.1.7
This table maintains the latest alarm status provided by each channel or line card in the chassis. There is only one alarm status entry per card. That means that the subsequent alarm status generated by the same card will overwrite the previous status stored in the correspondent entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DSLAMAlarmStatEntry

dslamAlarmStatEntry 1.3.6.1.4.1.927.1.9.1.7.1
An entry contains the latest alarm status for a channel or line card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DSLAMAlarmStatEntry  

pgDSLAMAlarmCardID 1.3.6.1.4.1.927.1.9.1.7.1.1
The slot containing the card which generates this alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

pgDSLAMAlarmPortNum 1.3.6.1.4.1.927.1.9.1.7.1.2
Together with the pgDSLAMAlarmCardID this object uniquely identify a port which an alarm condition was detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

pgDSLAMAlarmStatSeverity 1.3.6.1.4.1.927.1.9.1.7.1.3
The severity of the alarm reported by the channel or line card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), minor(2), major(3), critical(4)  

pgDSLAMAlarmTrapOID 1.3.6.1.4.1.927.1.9.1.7.1.4
The value of this object uniquely identify the type of alarm generated by the channel or line card. It is the same trap OID used to generate the SNMP trap when the alarm threshold value was exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

pgDSLAMChassisLEDStat 1.3.6.1.4.1.927.1.9.1.8
The octet within the value of this object specifies a set of eight LEDs. Within the octet, each bit represents the status of a LED on the front panel. Following is the bit-map: Lower octet: bit 0 : critical alarm LED bit 1 : major alarm LED bit 2 : minor alarm LED bit 3 : power minor alarm LED bit 4 : input power 1 bit 5 : input power 2 bit 6 : fuse alarm 1 bit 7 : fuse alarm 2 Upper octet: bit 0 : Alarm Cut Off bit 1 : abnormal bit 2 : fault bit 3 : external alarm bit 4 : fan alarm 1 bit 5 : fan alarm 2 bit 6 : fan alarm 3 bit 7 : fan alarm 4 If a bit has a value of '1' then the correspondant LED is on and '0' is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

pgDSLAMCalendarTime 1.3.6.1.4.1.927.1.9.1.9
The current date and time indicated by seconds since 1900.1.1 00:00:00
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

pgDSLAMSlotStatTable 1.3.6.1.4.1.927.1.9.1.10
The state of slots within this chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DSLAMSLOTStatEntry

pgDSLAMSlotStatEntry 1.3.6.1.4.1.927.1.9.1.10.1
An entry contains the information of a specified slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DSLAMSLOTStatEntry  

pgDSLAMSlotID 1.3.6.1.4.1.927.1.9.1.10.1.1
The slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

pgDSLAMSlotStatus 1.3.6.1.4.1.927.1.9.1.10.1.2
The status of the specified slot. unknown - uncertain state. up - the card plugged in this slot is up and running. down - the card is not functioning. notPresent - there is no card plugged in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3), notPresent(4)  

pgDSLAMChassisTemperature 1.3.6.1.4.1.927.1.9.1.11
The current temperature inside the chassis in Centigrade.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pgDSLAMFileDirectoryTable 1.3.6.1.4.1.927.1.9.1.12
The file directory for each slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PgDSLAMFileDirectoryEntry

pgDSLAMFileDirectoryEntry 1.3.6.1.4.1.927.1.9.1.12.1
An entry contains the file directory of a specified slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PgDSLAMFileDirectoryEntry  

pgDSLAMFileDirectorySlotID 1.3.6.1.4.1.927.1.9.1.12.1.1
The slot number for the file directory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

pgDSLAMFileDirectory 1.3.6.1.4.1.927.1.9.1.12.1.2
The file directory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..2047)  

pgDSLAMFsSlotID 1.3.6.1.4.1.927.1.9.1.13
The slot number for the file operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..21  

pgDSLAMFsFileName 1.3.6.1.4.1.927.1.9.1.14
The file name for the file operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

pgDSLAMFsAction 1.3.6.1.4.1.927.1.9.1.15
The action for the file operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), delete(2)  

pgDSLAMCalendarTimeOs 1.3.6.1.4.1.927.1.9.1.16
A date-time format. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 For example, Tuesday May 26, 1992 at 1:30:15 PM would be displayed as: 1992-5-26,13:30:15
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(7)  

pgDSLAMAllSlotLED 1.3.6.1.4.1.927.1.9.1.17
This object reflects the current status of all the front panel LED's on all the slot of the Avidia Shelf. The Semantics of the octet-string is as described below. It is set of following structure. First Octet - SlotID Second Octet - CardType PgDSLAMUnitType Third Octet - Number of Bytes Used by the Slot LED Status. Fourth Octet - Status of LED for port1 Fifth Octet - Status of LED for port2 .... .... till depending on the Number of port on the card. LED Status in encoded as a bit map described below Bits 0-3 represent the State (0000-off,0001-on,0011-Blinking) Bits 4-7 represent the Color (0000-clear,0001-green,0011-yellow,0100-red) For AMC two octet will be used to represent the LED Status Lower octet: bit 0 : critical alarm LED bit 1 : major alarm LED bit 2 : minor alarm LED bit 3 : power minor alarm LED bit 4 : input power 1 bit 5 : input power 2 bit 6 : fuse alarm 1 bit 7 : fuse alarm 2 Upper octet: bit 0 : Alarm Cut Off bit 1 : abnormal bit 2 : fault bit 3 : external alarm bit 4 : fan alarm 1 bit 5 : fan alarm 2 bit 6 : fan alarm 3 bit 7 : fan alarm 4 If a bit has a value of '1' then the correspondant LED is on and '0' is off. For OC-3 each port will have three LED's Tx,Rx,Sync and one APS
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..568)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor