PACKETFRONT-DRG-MIB
File:
PACKETFRONT-DRG-MIB.mib (35458 bytes)
Imported modules
Imported symbols
Defined Types
HostIfEntry |
|
SEQUENCE |
|
|
|
|
hostIfIndex |
Integer32 |
|
|
hostIfMode |
INTEGER |
|
|
hostIfHostName |
OCTET STRING |
|
|
hostIfAddress |
IpAddress |
|
|
hostIfSubnetMask |
IpAddress |
|
|
hostIfDefaultRouter |
IpAddress |
|
|
hostIfDomainName |
OCTET STRING |
|
|
hostIfDnsServer1 |
IpAddress |
|
|
hostIfDnsServer2 |
IpAddress |
|
|
hostIfDhcpClientID |
OCTET STRING |
|
|
hostIfDhcpVendorClassID |
OCTET STRING |
|
|
hostIfDiffservCodePoint |
INTEGER |
|
|
hostIfVlan |
INTEGER |
|
|
hostIfVlanPriority |
INTEGER |
|
|
hostIfSecurePing |
INTEGER |
|
SnmpTrapDestinationEntry |
|
SEQUENCE |
|
|
|
|
snmpTrapDestIndex |
Integer32 |
|
|
snmpTrapDestName |
OCTET STRING |
|
|
snmpTrapDestAddress |
IpAddress |
|
|
snmpTrapDestTagList |
OCTET STRING |
|
|
snmpTrapDestRowStatus |
RowStatus |
|
VlanFdbEntry |
|
SEQUENCE |
|
|
|
|
vlanFdbId |
Unsigned32 |
|
|
vlanFdbDynamicCount |
Counter32 |
|
VlanTpFdbEntry |
|
SEQUENCE |
|
|
|
|
vlanTpFdbAddress |
MacAddress |
|
|
vlanTpFdbPort |
Integer32 |
|
|
vlanTpFdbStatus |
INTEGER |
|
VlanStaticEntry |
|
SEQUENCE |
|
|
|
|
vlanStaticIndex |
Integer32 |
|
|
vlanStaticName |
OCTET STRING |
|
|
vlanStaticVlanId |
Integer32 |
|
|
vlanStaticPriority |
Integer32 |
|
|
vlanStaticEgressPorts |
PortList |
|
|
vlanStaticUntaggedPorts |
PortList |
|
|
vlanStaticUnmodifiedPorts |
PortList |
|
|
vlanStaticRowStatus |
RowStatus |
|
Defined Values
pfDrgMib |
1.3.6.1.4.1.9303.4.3 |
The MIB module for managing Packetfront DRG devices |
MODULE-IDENTITY |
|
|
|
drgConfig |
1.3.6.1.4.1.9303.4.3.1 |
OBJECT IDENTIFIER |
|
|
|
productName |
1.3.6.1.4.1.9303.4.3.1.1.1 |
The name of the product. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
productSerialNo |
1.3.6.1.4.1.9303.4.3.1.1.2 |
The unique serial number programmed into the device in the factory. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
productProductionWeek |
1.3.6.1.4.1.9303.4.3.1.1.3 |
The week and year in which this device was manufactured. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
productSwImageRev |
1.3.6.1.4.1.9303.4.3.1.1.4 |
The revision of the software in the device. This may be upgraded. E.g
DMA0081-R2K123. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
productFwImageRev |
1.3.6.1.4.1.9303.4.3.1.1.5 |
The revision of the firmware in the device. This describes the bootloader
revision, e.g. cxc_132_4098-R3A18. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
productDefaultRevision |
1.3.6.1.4.1.9303.4.3.1.1.6 |
The revision of the default configuration in the device. This describes the
revision of information loaded during manufacture. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
productOpDefRev |
1.3.6.1.4.1.9303.4.3.1.1.7 |
The revision of the operator default information (the .ini file). The syntax
is operator specific.Operator default revision ( INI file ). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
productHardwareRev |
1.3.6.1.4.1.9303.4.3.1.1.8 |
Manufacturing hardware information regarding the revision of the hardware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
productFunctionIdentity |
1.3.6.1.4.1.9303.4.3.1.1.11 |
Describes the functionality offered by the device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
productMacAddress |
1.3.6.1.4.1.9303.4.3.1.1.12 |
The device MAC address - this is used in various alert messages to uniquely
identify the specific device. The MAC address used is the MAC of the
management entity of the device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
productIdentity |
1.3.6.1.4.1.9303.4.3.1.1.13 |
This object provides a unique identity for the device. By default this will
be the same as the productMacAddress, however, if a hostname has been defined
or provided by a DHCP server, then this will be used instead. In the former
case, therefore, the identity is guaranteed to be unique, while in the latter
it is the operator's responsibility to ensure that the identity is unique. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
systemConfigRestartControl |
1.3.6.1.4.1.9303.4.3.1.2.1 |
Setting this object to restartNow(2) causes the device to reboot
immediately. Note that this will cause any unsave configuration changes
to be lost, therefore configuration changes should be saved before using
this value if the changes are required.
The device returns running(1) in all other cases. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
running(1), restartNow(2) |
|
systemConfigRestartControlNotify |
1.3.6.1.4.1.9303.4.3.1.2.2 |
This object controls the operation of the notifyRestart alert. The
notifyRestart is sent repeatedly when the object is equal to notifying(2).
The notifyRestart is not sent when the object is equal to silent(1). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
silent(1), notifying(2) |
|
systemConfigSave |
1.3.6.1.4.1.9303.4.3.1.2.3 |
Setting the object to save(1) causes the running configuration to be
saved. The object responds with changed(2) if the running configuration
differs from the initial configuration. The object responds with notChanged(3)
if no configuration changes have occurred since the last save or boot. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
save(1), changed(2), notChanged(3) |
|
systemConfigFactoryReset |
1.3.6.1.4.1.9303.4.3.1.2.4 |
Setting this object to factoryReset(2) causes the device to return to its
factory default settings, and reboot. This means that any operator or user
configuration changes will be deleted, and the device will appear as if it
has not previously been installed and configured. When read this object will
return running(1) unless it is currently in the process of performing a
factory reset. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
running(1), factoryReset(2) |
|
systemConfigSaveNotify |
1.3.6.1.4.1.9303.4.3.1.2.5 |
Setting this object to always(2) will cause the device to send a
notifyConfigSaveResult alert each time the configuration is saved. Setting
this object to onlyErrors(3) will cause the device to send a
notifyConfigSaveResult if an error occurs during a configuration save
procedure. Setting this object to silent(1) causes the device to not send
notifyConfigSaveResult alerts. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
silent(1), always(2), onlyErrors(3) |
|
downloadServer |
1.3.6.1.4.1.9303.4.3.1.3.1 |
The address of the server that contains the file to be loaded. This may take
the form of an IP address or FQDN. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
downloadFile |
1.3.6.1.4.1.9303.4.3.1.3.2 |
The file name to be downloaded from the download server or a URL to be
downloaded via http. This value is set to the zero length string when no
file name has been specified. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..80) |
|
downloadAction |
1.3.6.1.4.1.9303.4.3.1.3.3 |
When this object is set to startDownload(2), the system will attempt to
connect to the server specified in downloadServer (or the host part of
downloadFile if a URL has been specified there), using the method defined
in downloadMethod. If the file is found and verified, it will be downloaded
to the device and stored. When the download process is completed, the device
will restart the newly loaded application.
When the device is not downloading, this object will have a value of
notDownloading(1). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notDownloading(1), startDownload(2) |
|
downloadMethod |
1.3.6.1.4.1.9303.4.3.1.3.4 |
Defines the method to be used for the file download. This may be a specific
protocol, or auto(3) which will cycle through the available methods to find
one which works. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
tftp(1), http(2), auto(3) |
|
downloadRetryCount |
1.3.6.1.4.1.9303.4.3.1.3.5 |
Controls the number of attempts which will be made to perform a download
before terminating the download attempt. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..10 |
|
downloadResultCode |
1.3.6.1.4.1.9303.4.3.1.3.6 |
This object returns the status of the last download procedure. If no
downloads have occurred, none(0) is returned, or if there is currently
a download in progress, inProgress(1) is returned. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(0), inProgress(1), success(2), failureHostNotFound(3), failureFileNotFound(4), failureFileIncorrectSize(5), failureFileVerifyFailure(6), failureFileIncompatible(7), failureUnknownError(8) |
|
downloadResultNotify |
1.3.6.1.4.1.9303.4.3.1.3.7 |
Setting the object to always(2) cause the system to send
downloadResultCodeTrap after every download no matter the result. Setting
the object to onlyErrors(3) cause the system to send downloadResultCodeTrap
when an error occurs during the download. Setting the object to silent(1)
cause the system to not send any downloadResultNotify notifications. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
silent(1), always(2), onError(3) |
|
hostConfig |
1.3.6.1.4.1.9303.4.3.1.4 |
OBJECT IDENTIFIER |
|
|
|
hostIfMax |
1.3.6.1.4.1.9303.4.3.1.4.1 |
The maximum numbers of entries (and layer 3 interfaces) in the hostIfTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hostIfDefined |
1.3.6.1.4.1.9303.4.3.1.4.2 |
The current number of defined host interfaces, i.e. the number of entries in
the hostIfTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hostIfTable |
1.3.6.1.4.1.9303.4.3.1.4.3 |
A table holding a list of interfaces. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HostIfEntry |
|
hostIfEntry |
1.3.6.1.4.1.9303.4.3.1.4.3.1 |
One row of the table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HostIfEntry |
|
|
hostIfIndex |
1.3.6.1.4.1.9303.4.3.1.4.3.1.1 |
A unique index for this IP interface entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4 |
|
hostIfMode |
1.3.6.1.4.1.9303.4.3.1.4.3.1.2 |
The operational mode of the interface, e.g. DHCP, PPPoE. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dhcp(1), static(2), pppoe(3), pppoeFixed(4) |
|
hostIfHostName |
1.3.6.1.4.1.9303.4.3.1.4.3.1.3 |
The name of the host interface. If the DHCP client is enabled this object
reports the host name from the DHCP negotiation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
hostIfAddress |
1.3.6.1.4.1.9303.4.3.1.4.3.1.4 |
The IP address for this interface entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hostIfSubnetMask |
1.3.6.1.4.1.9303.4.3.1.4.3.1.5 |
The subnet mask for this interface entry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hostIfDefaultRouter |
1.3.6.1.4.1.9303.4.3.1.4.3.1.6 |
The default router for this interface entry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hostIfDomainName |
1.3.6.1.4.1.9303.4.3.1.4.3.1.7 |
The name of the domain name. If the DHCP client is enabled this object
reports the domain name from the DHCP negotiation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
hostIfDnsServer1 |
1.3.6.1.4.1.9303.4.3.1.4.3.1.8 |
The primary DNS server for this interface entry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hostIfDnsServer2 |
1.3.6.1.4.1.9303.4.3.1.4.3.1.9 |
The secondary DNS server for this interface entry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hostIfDhcpClientID |
1.3.6.1.4.1.9303.4.3.1.4.3.1.10 |
Setting this object causes the system to use a proprietary client identifier
to identify itself to the DHCP server. By default the productMacAddress value
of the device is used. This object thus allows the definition of the DHCP option
61 value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
hostIfDhcpVendorClassID |
1.3.6.1.4.1.9303.4.3.1.4.3.1.11 |
Setting this object causes the system to use the defined value as the DHCP
vendor identifier in communication with the DHCP server. By default the value
used is of the form 'drg-$-$'. This object thus
allows the definition of the DHCP option 60 value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..48) |
|
hostIfDiffservCodePoint |
1.3.6.1.4.1.9303.4.3.1.4.3.1.12 |
Defines the IP DSCP value used by default for this interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..63 |
|
hostIfVlan |
1.3.6.1.4.1.9303.4.3.1.4.3.1.13 |
Values 1..4094 define the default IEEE802.1Q VLAN tag used by this interface.
By convention, this is used as the management VLAN when VLANs are enabled on
this interface.
The value 0 disables the use of management VLANs on this interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..4094 |
|
hostIfVlanPriority |
1.3.6.1.4.1.9303.4.3.1.4.3.1.14 |
Defines the default IEEE802.1p priority tag used by this interface. By
convention, this is used as the management priority when VLANs are enabled
on this interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..7 |
|
hostIfSecurePing |
1.3.6.1.4.1.9303.4.3.1.4.3.1.15 |
Setting this object to enabled(1) causes the device to silently drop ICMP
echo (ping) requests. This is a simple way to cloak the presence of a
device from ping sweeps. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
snmpConfig |
1.3.6.1.4.1.9303.4.3.1.7 |
OBJECT IDENTIFIER |
|
|
|
snmpTrapDestHostsMax |
1.3.6.1.4.1.9303.4.3.1.7.1 |
The maximum number of trap hosts which may be defined |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpTrapDestinationEntry |
1.3.6.1.4.1.9303.4.3.1.7.3.1 |
A transport address to be used in the generation of SNMP operations.
Entries in the trapDestinationTable are created and deleted using the
snmpTrapDestRowStatus object. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnmpTrapDestinationEntry |
|
|
snmpTrapDestIndex |
1.3.6.1.4.1.9303.4.3.1.7.3.1.1 |
The locally arbitrary, but unique identifier associated with this trapDestinationEntry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
snmpTrapDestName |
1.3.6.1.4.1.9303.4.3.1.7.3.1.2 |
This object contains a human readable name for the trap destination. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
snmpTrapDestAddress |
1.3.6.1.4.1.9303.4.3.1.7.3.1.3 |
This object contains the address of the trap destination. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
snmpTrapDestTagList |
1.3.6.1.4.1.9303.4.3.1.7.3.1.4 |
This object contains a list of tag values which are used to select target
addresses for a particular operation. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
snmpTrapDestRowStatus |
1.3.6.1.4.1.9303.4.3.1.7.3.1.5 |
The status of this conceptual row. To create a row in this table, a
manager must set this object to either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are appropriately configured,
the value of the corresponding instance of the trapDestRowStatus column
is 'notReady'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
snmpDiffservCodePoint |
1.3.6.1.4.1.9303.4.3.1.7.7 |
Defines the IP DSCP value used by the SNMP agent. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..63 |
|
snmpAtomicSet |
1.3.6.1.4.1.9303.4.3.1.7.8 |
Complex operations involving numerous set commands can cause problems due
to the lack of atomic operation by the network management system. This object
may be used to ensure that all required changes for this MIB are made in a
single atomic operation.
This can be achieved by setting this object to stage(2), then setting all
required objects, and then setting this object to apply(3). The object value
will return to idle(1) once the atomic set operation has been completed. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
idle(1), stage(2), apply(3) |
|
vlanConfig |
1.3.6.1.4.1.9303.4.3.1.8 |
OBJECT IDENTIFIER |
|
|
|
vlanBase |
1.3.6.1.4.1.9303.4.3.1.8.1 |
OBJECT IDENTIFIER |
|
|
|
vlanTp |
1.3.6.1.4.1.9303.4.3.1.8.2 |
OBJECT IDENTIFIER |
|
|
|
vlanStatic |
1.3.6.1.4.1.9303.4.3.1.8.3 |
OBJECT IDENTIFIER |
|
|
|
vlanVersionNumber |
1.3.6.1.4.1.9303.4.3.1.8.1.1 |
The version number of IEEE802.1Q that this device supports. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
version1(1), version2(2) |
|
vlanMaxVlanId |
1.3.6.1.4.1.9303.4.3.1.8.1.2 |
The maximum IEEE802.1Q VLAN ID that this device supports. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4094 |
|
vlanMaxSupportedVlans |
1.3.6.1.4.1.9303.4.3.1.8.1.3 |
The maximum number of IEEE802.1Q VLANs that this device supports. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
vlanNumVlans |
1.3.6.1.4.1.9303.4.3.1.8.1.4 |
The current number of IEEE802.1Q VLANs that are configured in this device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
vlanFdbTable |
1.3.6.1.4.1.9303.4.3.1.8.2.1 |
A table that contains configuration and control
information for each Filtering Database currently
operating on this device. Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
vlanVlanCurrentTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VlanFdbEntry |
|
vlanFdbEntry |
1.3.6.1.4.1.9303.4.3.1.8.2.1.1 |
Information about a specific Filtering Database. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanFdbEntry |
|
|
vlanFdbId |
1.3.6.1.4.1.9303.4.3.1.8.2.1.1.1 |
The identity of this Filtering Database. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
vlanFdbDynamicCount |
1.3.6.1.4.1.9303.4.3.1.8.2.1.1.2 |
The current number of dynamic entries in this
Filtering Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
vlanTpFdbTable |
1.3.6.1.4.1.9303.4.3.1.8.2.2 |
A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VlanTpFdbEntry |
|
vlanTpFdbEntry |
1.3.6.1.4.1.9303.4.3.1.8.2.2.1 |
Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanTpFdbEntry |
|
|
vlanTpFdbAddress |
1.3.6.1.4.1.9303.4.3.1.8.2.2.1.1 |
A unicast MAC address for which the device has
forwarding and/or filtering information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
vlanTpFdbPort |
1.3.6.1.4.1.9303.4.3.1.8.2.2.1.2 |
Either the value '0', or the port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of vlanTpFdbAddress has
been seen. A value of '0' indicates that the port
number has not been learned but that the device does
have some forwarding/filtering information about this
address (e.g. in the vlanStaticUnicastTable).
Implementors are encouraged to assign the port value to
this object whenever it is learned even for addresses
for which the corresponding value of vlanTpFdbStatus is
not learned(3). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
vlanTpFdbStatus |
1.3.6.1.4.1.9303.4.3.1.8.2.2.1.3 |
The status of this entry. The meanings of the values are:
other(1) - none of the following. This may include
the case where some other MIB object (not the
corresponding instance of vlanTpFdbPort, nor an
entry in the vlanStaticUnicastTable) is being
used to determine if and how frames addressed to
the value of the corresponding instance of
vlanTpFdbAddress are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of vlanTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
vlanTpFdbAddress represents one of the device's
addresses. The corresponding instance of
vlanTpFdbPort indicates which of the device's
ports has this address.
mgmt(5) - the value of the corresponding instance of
vlanTpFdbAddress is also the value of an
existing instance of vlanStaticAddress. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), invalid(2), learned(3), self(4), mgmt(5) |
|
vlanStaticTable |
1.3.6.1.4.1.9303.4.3.1.8.3.1 |
A table containing static configuration information for each VLAN configured
on the device. All entries are permanent and will be restored after the
device is reset. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VlanStaticEntry |
|
vlanStaticEntry |
1.3.6.1.4.1.9303.4.3.1.8.3.1.1 |
Static information for a VLAN configured in the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanStaticEntry |
|
|
vlanStaticIndex |
1.3.6.1.4.1.9303.4.3.1.8.3.1.1.1 |
The locally arbitrary, but unique identifier associated with this vlanStaticEntry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
vlanStaticName |
1.3.6.1.4.1.9303.4.3.1.8.3.1.1.2 |
An administratively assigned string, which may be used to identify the VLAN |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
vlanStaticVlanId |
1.3.6.1.4.1.9303.4.3.1.8.3.1.1.3 |
The VLAN identifier associated with this VLAN entry |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4094 |
|
vlanStaticPriority |
1.3.6.1.4.1.9303.4.3.1.8.3.1.1.4 |
The IEEE802.1p priority value associated with this VLAN entry - this
information may be used for policing priority where supported |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..7 |
|
vlanStaticEgressPorts |
1.3.6.1.4.1.9303.4.3.1.8.3.1.1.5 |
The set of ports which are permanently assigned to the egress list for this
VLAN by management. The default value of this object is a string of zeros
of appropriate length, indicating not fixed. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
vlanStaticUntaggedPorts |
1.3.6.1.4.1.9303.4.3.1.8.3.1.1.6 |
Describes the set of ports which should transmit egress packets for this
VLAN untagged. If a device agent cannot support the set of ports being
set then it will reject the set operation with an error. An example might
be if a manager attempts to set more than one VLAN to be untagged on egress
where the device does not support this IEEE 802.1Q option. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
vlanStaticUnmodifiedPorts |
1.3.6.1.4.1.9303.4.3.1.8.3.1.1.7 |
Describes the set of ports which should transmit egress packets for this
VLAN unmodified. If a device agent cannot support the set of ports being
set then it will reject the set operation with an error.
Note that if this behaviour is supported and the bit is set for a port,
the value of the same bit in vlanStaticUntaggedPorts is ignored. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
vlanStaticRowStatus |
1.3.6.1.4.1.9303.4.3.1.8.3.1.1.8 |
This object indicates the status of this entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
notifyRestart |
1.3.6.1.4.1.9303.4.3.0.1 |
After booting the system sends this notification repeatedly with an increasing
time delay until a valid management station reads or writes an object. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
notifyDownloadResult |
1.3.6.1.4.1.9303.4.3.0.2 |
When the device has downloaded a new firmware image or configuration file,
the device sends this notification to inform the management system of the
result. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
notifyConfigSaveResult |
1.3.6.1.4.1.9303.4.3.0.3 |
When a save event occurs, the device sends this notification to inform the
management system of the result. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
drgGroups |
1.3.6.1.4.1.9303.4.3.2.1 |
OBJECT IDENTIFIER |
|
|
|