OPTIX-SONET-LPBK-MIB-V2

File: OPTIX-SONET-LPBK-MIB-V2.mib (8674 bytes)

Imported modules

OPTIX-OID-MIB OPTIX-SONET-TC-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

optixCommonSonet MOD2Type OBJECT-GROUP
MODULE-COMPLIANCE Gauge32 OBJECT-TYPE
MODULE-IDENTITY TEXTUAL-CONVENTION

Defined Types

LpbkType  
Enter the description for the LpbkType TEXTUAL-CONVENTION converted from type assignment.
TEXTUAL-CONVENTION    
  INTEGER noloop(255), terminal(1), facility(2), crs(3), ds1feac(4), ds3feac(5), fac2ni(6)  

LpbkStateEntry  
SEQUENCE    
  lpbkStateMOD2 MOD2Type
  lpbkStateSlot Gauge32
  lpbkStatePort Gauge32
  lpbkStatePath Gauge32
  lpbkStateVT Gauge32
  lpbkStateLpbkType LpbkType
  lpbkStateTimeout Gauge32

LpbkFlagEntry  
SEQUENCE    
  lpbkFlagMOD2 MOD2Type
  lpbkFlagSlot Gauge32
  lpbkFlagPort Gauge32
  lpbkFlagPath Gauge32
  lpbkFlagVT Gauge32
  lpbkFlagLpbkType LpbkType
  lpbkFlagEnFlag INTEGER
  lpbkFlagTimeout Gauge32

Defined Values

optixSonetMaintenance 1.3.6.1.4.1.2011.2.25.3.20.50
This module describes the Loopback interface of Huawei SONET transmit platform
MODULE-IDENTITY    

optixSonetLoopback 1.3.6.1.4.1.2011.2.25.3.20.50.10
OBJECT IDENTIFIER    

lpbkStateTable 1.3.6.1.4.1.2011.2.25.3.20.50.10.10
Loopback state table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpbkStateEntry

lpbkStateEntry 1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1
Loopback state entry
Status: current Access: not-accessible
OBJECT-TYPE    
  LpbkStateEntry  

lpbkStateMOD2 1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.1
The modifier that identifies the type of the facility
Status: current Access: read-only
OBJECT-TYPE    
  MOD2Type  

lpbkStateSlot 1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.2
Slot number. This will indicate what is the slot of the object.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

lpbkStatePort 1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.3
Port Number. This will indicate what is the Port of the object.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

lpbkStatePath 1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.4
Path number. This will indicate what is the Path of the object.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

lpbkStateVT 1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.5
VT path number. This will indicate what is the VT path of the object.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

lpbkStateLpbkType 1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.6
The loopback type of the facility
Status: current Access: read-only
OBJECT-TYPE    
  LpbkType  

lpbkStateTimeout 1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.7
The remnant time that loop-back will be released.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

lpbkFlagTable 1.3.6.1.4.1.2011.2.25.3.20.50.10.20
Loopback Enable table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpbkFlagEntry

lpbkFlagEntry 1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1
Loopback Enable entry
Status: current Access: not-accessible
OBJECT-TYPE    
  LpbkFlagEntry  

lpbkFlagMOD2 1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.1
The modifier that identifies the type of the facility
Status: current Access: read-only
OBJECT-TYPE    
  MOD2Type  

lpbkFlagSlot 1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.2
Slot number. This will indicate what is the slot of the object.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

lpbkFlagPort 1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.3
Port Number. This will indicate what is the Port of the object.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

lpbkFlagPath 1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.4
Path number. This will indicate what is the Path of the object.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

lpbkFlagVT 1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.5
VT path number. This will indicate what is the VT path of the object.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

lpbkFlagLpbkType 1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.6
The loopback type of the facility
Status: current Access: read-only
OBJECT-TYPE    
  LpbkType  

lpbkFlagEnFlag 1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.7
T1 or T3 remote loop-back enable flag
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

lpbkFlagTimeout 1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.8
The automatic release time of loopback.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

optixSonetMaintenanceConformance 1.3.6.1.4.1.2011.2.25.3.20.50.11
OBJECT IDENTIFIER    

optixSonetMaintenanceGroups 1.3.6.1.4.1.2011.2.25.3.20.50.11.1
OBJECT IDENTIFIER    

currentObjectGroup 1.3.6.1.4.1.2011.2.25.3.20.50.11.1.1
Enter the description of the created OBJECT-GROUP.
Status: current Access: read-only
OBJECT-GROUP    

optixSonetMaintenanceCompliances 1.3.6.1.4.1.2011.2.25.3.20.50.11.2
OBJECT IDENTIFIER    

basicCompliance 1.3.6.1.4.1.2011.2.25.3.20.50.11.2.1
Enter the description of the created MODULE-COMPLIANCE.
Status: current Access: read-only
MODULE-COMPLIANCE