OMNI-gx2Rx085BX4-MIB

File: OMNI-gx2Rx085BX4-MIB.mib (132867 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215 NLS-BBNIDENT-MIB GX2HFC-MIB
NLSBBN-TRAPS-MIB

Imported symbols

IpAddress TimeTicks Counter
OBJECT-TYPE sysUpTime DisplayString
TRAP-TYPE gi motproxies
gx2Rx085BX4 trapIdentifier trapNetworkElemModelNumber
trapNetworkElemSerialNum trapPerceivedSeverity trapNetworkElemOperState
trapNetworkElemAlarmStatus trapNetworkElemAdminState trapNetworkElemAvailStatus
trapText trapNETrapLastTrapTimeStamp trapChangedObjectId
trapChangedValueInteger trapChangedValueDisplayString

Defined Types

Float  
Counter    

U32Data  
Counter    

Gx2Rx085BX4AnalogEntry  
SEQUENCE    
  gx2Rx085BX4AnalogTableIndex INTEGER
  rx085labelOptPowerOne DisplayString Size(0..80)
  rx085uomOptPowerOne DisplayString Size(0..80)
  rx085majorHighOptPowerOne Float
  rx085majorLowOptPowerOne Float
  rx085minorHighOptPowerOne Float
  rx085minorLowOptPowerOne Float
  rx085currentValueOptPowerOne Float
  rx085stateFlagOptPowerOne INTEGER
  rx085minValueOptPowerOne Float
  rx085maxValueOptPowerOne Float
  rx085alarmStateOptPowerOne INTEGER
  rx085labelOptPowerTwo DisplayString Size(0..80)
  rx085uomOptPowerTwo DisplayString Size(0..80)
  rx085majorHighOptPowerTwo Float
  rx085majorLowOptPowerTwo Float
  rx085minorHighOptPowerTwo Float
  rx085minorLowOptPowerTwo Float
  rx085currentValueOptPowerTwo Float
  rx085stateFlagOptPowerTwo INTEGER
  rx085minValueOptPowerTwo Float
  rx085maxValueOptPowerTwo Float
  rx085alarmStateOptPowerTwo INTEGER
  rx085labelOptPowerThree DisplayString Size(0..80)
  rx085uomOptPowerThree DisplayString Size(0..80)
  rx085majorHighOptPowerThree Float
  rx085majorLowOptPowerThree Float
  rx085minorHighOptPowerThree Float
  rx085minorLowOptPowerThree Float
  rx085currentValueOptPowerThree Float
  rx085stateFlagOptPowerThree INTEGER
  rx085minValueOptPowerThree Float
  rx085maxValueOptPowerThree Float
  rx085alarmStateOptPowerThree INTEGER
  rx085labelOptPowerFour DisplayString Size(0..80)
  rx085uomOptPowerFour DisplayString Size(0..80)
  rx085majorHighOptPowerFour Float
  rx085majorLowOptPowerFour Float
  rx085minorHighOptPowerFour Float
  rx085minorLowOptPowerFour Float
  rx085currentValueOptPowerFour Float
  rx085stateFlagOptPowerFour INTEGER
  rx085minValueOptPowerFour Float
  rx085maxValueOptPowerFour Float
  rx085alarmStateOptPowerFour INTEGER
  rx085labelModTemp DisplayString Size(0..80)
  rx085uomModTemp DisplayString Size(0..80)
  rx085majorHighModTemp Float
  rx085majorLowModTemp Float
  rx085minorHighModTemp Float
  rx085minorLowModTemp Float
  rx085currentValueModTemp Float
  rx085stateFlagModTemp INTEGER
  rx085minValueModTemp Float
  rx085maxValueModTemp Float
  rx085alarmStateModTemp INTEGER
  rx085labelFanCurrent DisplayString Size(0..80)
  rx085uomFanCurrent DisplayString Size(0..80)
  rx085majorHighFanCurrent Float
  rx085majorLowFanCurrent Float
  rx085minorHighFanCurrent Float
  rx085minorLowFanCurrent Float
  rx085currentValueFanCurrent Float
  rx085stateFlagFanCurrent INTEGER
  rx085minValueFanCurrent Float
  rx085maxValueFanCurrent Float
  rx085alarmStateFanCurrent INTEGER
  rx085label12Volt DisplayString Size(0..80)
  rx085uom12Volt DisplayString Size(0..80)
  rx085majorHigh12Volt Float
  rx085majorLow12Volt Float
  rx085minorHigh12Volt Float
  rx085minorLow12Volt Float
  rx085currentValue12Volt Float
  rx085stateFlag12Volt INTEGER
  rx085minValue12Volt Float
  rx085maxValue12Volt Float
  rx085alarmState12Volt INTEGER

Gx2Rx085BX4DigitalEntry  
SEQUENCE    
  gx2Rx085BX4DigitalTableIndex INTEGER
  rx085labelModeOne DisplayString Size(0..80)
  rx085valueModeOne INTEGER
  rx085enumModeOne DisplayString Size(0..80)
  rx085stateFlagModeOne INTEGER
  rx085labelWavelengthOne DisplayString Size(0..80)
  rx085valueWavelengthOne INTEGER
  rx085enumWavelengthOne DisplayString Size(0..80)
  rx085stateFlagWavelengthOne INTEGER
  rx085labelAttnSettingOne DisplayString Size(0..80)
  rx085valueAttnSettingOne INTEGER
  rx085enumAttnSettingOne DisplayString Size(0..80)
  rx085stateFlagAttnSettingOne INTEGER
  rx085labelSwModeSettingOne DisplayString Size(0..80)
  rx085valueSwModeSettingOne INTEGER
  rx085enumSwModeSettingOne DisplayString Size(0..80)
  rx085stateFlagSwModeSettingOne INTEGER
  rx085labelSwModeThresholdOne DisplayString Size(0..80)
  rx085valueSwModeThresholdOne INTEGER
  rx085enumSwModeThresholdOne DisplayString Size(0..80)
  rx085stateFlagSwModeThresholdOne INTEGER
  rx085labelModeTwo DisplayString Size(0..80)
  rx085valueModeTwo INTEGER
  rx085enumModeTwo DisplayString Size(0..80)
  rx085stateFlagModeTwo INTEGER
  rx085labelWavelengthTwo DisplayString Size(0..80)
  rx085valueWavelengthTwo INTEGER
  rx085enumWavelengthTwo DisplayString Size(0..80)
  rx085stateFlagWavelengthTwo INTEGER
  rx085labelAttnSettingTwo DisplayString Size(0..80)
  rx085valueAttnSettingTwo INTEGER
  rx085enumAttnSettingTwo DisplayString Size(0..80)
  rx085stateFlagAttnSettingTwo INTEGER
  rx085labelSwModeSettingTwo DisplayString Size(0..80)
  rx085valueSwModeSettingTwo INTEGER
  rx085enumSwModeSettingTwo DisplayString Size(0..80)
  rx085stateFlagSwModeSettingTwo INTEGER
  rx085labelSwModeThresholdTwo DisplayString Size(0..80)
  rx085valueSwModeThresholdTwo INTEGER
  rx085enumSwModeThresholdTwo DisplayString Size(0..80)
  rx085stateFlagSwModeThresholdTwo INTEGER
  rx085labelModeThree DisplayString Size(0..80)
  rx085valueModeThree INTEGER
  rx085enumModeThree DisplayString Size(0..80)
  rx085stateFlagModeThree INTEGER
  rx085labelWavelengthThree DisplayString Size(0..80)
  rx085valueWavelengthThree INTEGER
  rx085enumWavelengthThree DisplayString Size(0..80)
  rx085stateFlagWavelengthThree INTEGER
  rx085labelAttnSettingThree DisplayString Size(0..80)
  rx085valueAttnSettingThree INTEGER
  rx085enumAttnSettingThree DisplayString Size(0..80)
  rx085stateFlagAttnSettingThree INTEGER
  rx085labelSwModeSettingThree DisplayString Size(0..80)
  rx085valueSwModeSettingThree INTEGER
  rx085enumSwModeSettingThree DisplayString Size(0..80)
  rx085stateFlagSwModeSettingThree INTEGER
  rx085labelSwModeThresholdThree DisplayString Size(0..80)
  rx085valueSwModeThresholdThree INTEGER
  rx085enumSwModeThresholdThree DisplayString Size(0..80)
  rx085stateFlagSwModeThresholdThree INTEGER
  rx085labelModeFour DisplayString Size(0..80)
  rx085valueModeFour INTEGER
  rx085enumModeFour DisplayString Size(0..80)
  rx085stateFlagModeFour INTEGER
  rx085labelWavelengthFour DisplayString Size(0..80)
  rx085valueWavelengthFour INTEGER
  rx085enumWavelengthFour DisplayString Size(0..80)
  rx085stateFlagWavelengthFour INTEGER
  rx085labelAttnSettingFour DisplayString Size(0..80)
  rx085valueAttnSettingFour INTEGER
  rx085enumAttnSettingFour DisplayString Size(0..80)
  rx085stateFlagAttnSettingFour INTEGER
  rx085labelSwModeSettingFour DisplayString Size(0..80)
  rx085valueSwModeSettingFour INTEGER
  rx085enumSwModeSettingFour DisplayString Size(0..80)
  rx085stateFlagSwModeSettingFour INTEGER
  rx085labelSwModeThresholdFour DisplayString Size(0..80)
  rx085valueSwModeThresholdFour INTEGER
  rx085enumSwModeThresholdFour DisplayString Size(0..80)
  rx085stateFlagSwModeThresholdFour INTEGER
  rx085labelModuleConfig DisplayString Size(0..80)
  rx085valueModuleConfig INTEGER
  rx085enumModuleConfig DisplayString Size(0..80)
  rx085stateFlagModuleConfig INTEGER
  rx085labelRevertTime DisplayString Size(0..80)
  rx085valueRevertTime INTEGER
  rx085enumRevertTime DisplayString Size(0..80)
  rx085stateFlagRevertTime INTEGER
  rx085labelTestPointSelect DisplayString Size(0..80)
  rx085valueTestPointSelect INTEGER
  rx085enumTestPointSelect DisplayString Size(0..80)
  rx085stateFlagTestPointSelect INTEGER
  rx085labelFactoryDefault DisplayString Size(0..80)
  rx085valueFactoryDefault INTEGER
  rx085enumFactoryDefault DisplayString Size(0..80)
  rx085stateFlagFactoryDefault INTEGER

Gx2Rx085BX4StatusEntry  
SEQUENCE    
  gx2Rx085BX4StatusTableIndex INTEGER
  rx085labelBoot DisplayString Size(0..80)
  rx085valueBoot INTEGER
  rx085stateflagBoot INTEGER
  rx085labelFlash DisplayString Size(0..80)
  rx085valueFlash INTEGER
  rx085stateflagFlash INTEGER
  rx085labelFactoryDataCRC DisplayString Size(0..80)
  rx085valueFactoryDataCRC INTEGER
  rx085stateflagFactoryDataCRC INTEGER
  rx085labelAlarmDataCRC DisplayString Size(0..80)
  rx085valueAlarmDataCRC INTEGER
  rx085stateflagAlarmDataCRC INTEGER
  rx085labelCalibrationDataCRC DisplayString Size(0..80)
  rx085valueCalibrationDataCRC INTEGER
  rx085stateflagCalibrationDataCRC INTEGER
  rx085labelHW DisplayString Size(0..80)
  rx085valueHW INTEGER
  rx085stateflagHW INTEGER
  rx085labelOptSigOne DisplayString Size(0..80)
  rx085valueOptSigOne INTEGER
  rx085stateflagOptSigOne INTEGER
  rx085labelOptSigTwo DisplayString Size(0..80)
  rx085valueOptSigTwo INTEGER
  rx085stateflagOptSigTwo INTEGER
  rx085labelOptSigThree DisplayString Size(0..80)
  rx085valueOptSigThree INTEGER
  rx085stateflagOptSigThree INTEGER
  rx085labelOptSigFour DisplayString Size(0..80)
  rx085valueOptSigFour INTEGER
  rx085stateflagOptSigFour INTEGER
  rx085labelBackupCable DisplayString Size(0..80)
  rx085valueBackupCable INTEGER
  rx085stateflagBackupCable INTEGER

Gx2Rx085BX4FactoryEntry  
SEQUENCE    
  gx2Rx085BX4FactoryTableIndex INTEGER
  rx085bootControlByte INTEGER
  rx085bootStatusByte INTEGER
  rx085bank0CRC INTEGER
  rx085bank1CRC INTEGER
  rx085prgEEPROMByte INTEGER
  rx085factoryCRC INTEGER
  rx085calculateCRC INTEGER
  rx085hourMeter INTEGER
  rx085flashPrgCntA INTEGER
  rx085flashPrgCntB INTEGER
  rx085fwRev0 DisplayString Size(0..80)
  rx085fwRev1 DisplayString Size(0..80)

Defined Values

gx2Rx085BX4Descriptor 1.3.6.1.4.1.1166.6.1.2.32.1
OBJECT IDENTIFIER    

gx2Rx085BX4AnalogTable 1.3.6.1.4.1.1166.6.1.2.32.2
This table contains gx2Rx085BX4 specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Rx085BX4AnalogEntry

gx2Rx085BX4AnalogEntry 1.3.6.1.4.1.1166.6.1.2.32.2.1
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Rx085BX4AnalogEntry  

gx2Rx085BX4DigitalTable 1.3.6.1.4.1.1166.6.1.2.32.3
This table contains gx2Rx085BX4 specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Rx085BX4DigitalEntry

gx2Rx085BX4DigitalEntry 1.3.6.1.4.1.1166.6.1.2.32.3.2
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Rx085BX4DigitalEntry  

gx2Rx085BX4StatusTable 1.3.6.1.4.1.1166.6.1.2.32.4
This table contains gx2Rx085BX4 specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Rx085BX4StatusEntry

gx2Rx085BX4StatusEntry 1.3.6.1.4.1.1166.6.1.2.32.4.3
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Rx085BX4StatusEntry  

gx2Rx085BX4FactoryTable 1.3.6.1.4.1.1166.6.1.2.32.5
This table contains gx2Rx085BX4 specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Rx085BX4FactoryEntry

gx2Rx085BX4FactoryEntry 1.3.6.1.4.1.1166.6.1.2.32.5.4
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Rx085BX4FactoryEntry  

gx2Rx085BX4AnalogTableIndex 1.3.6.1.4.1.1166.6.1.2.32.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

rx085labelOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.2
The value of this object provides the label of the Optical Power Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085uomOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.3
The value of this object provides the Unit of Measure of the Optical Power Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085majorHighOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.4
The value of this object provides the Major High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085majorLowOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.5
The value of this object provides the Major Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorHighOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.6
The value of this object provides the Minor High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorLowOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.7
The value of this object provides the Minor Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085currentValueOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.8
The value of this object provides the Current value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085stateFlagOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.9
The value of this object provides the state of the Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085minValueOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.10
The value of this object provides the minimum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085maxValueOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.11
The value of this object provides the maximum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085alarmStateOptPowerOne 1.3.6.1.4.1.1166.6.1.2.32.2.1.12
The value of this object provides the curent alarm state of the Optical Power Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

rx085labelOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.13
The value of this object provides the label of the Optical Power Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085uomOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.14
The value of this object provides the Unit of Measure of the Optical Power Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085majorHighOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.15
The value of this object provides the Major High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085majorLowOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.16
The value of this object provides the Major Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorHighOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.17
The value of this object provides the Minor High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorLowOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.18
The value of this object provides the Minor Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085currentValueOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.19
The value of this object provides the Current value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085stateFlagOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.20
The value of this object provides the state of the Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085minValueOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.21
The value of this object provides the minimum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085maxValueOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.22
The value of this object provides the maximum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085alarmStateOptPowerTwo 1.3.6.1.4.1.1166.6.1.2.32.2.1.23
The value of this object provides the curent alarm state of the Optical Power Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

rx085labelOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.24
The value of this object provides the label of the Optical Power Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085uomOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.25
The value of this object provides the Unit of Measure of the Optical Power Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085majorHighOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.26
The value of this object provides the Major High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085majorLowOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.27
The value of this object provides the Major Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorHighOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.28
The value of this object provides the Minor High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorLowOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.29
The value of this object provides the Minor Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085currentValueOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.30
The value of this object provides the Current value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085stateFlagOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.31
The value of this object provides the state of the Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085minValueOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.32
The value of this object provides the minimum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085maxValueOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.33
The value of this object provides the maximum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085alarmStateOptPowerThree 1.3.6.1.4.1.1166.6.1.2.32.2.1.34
The value of this object provides the curent alarm state of the Optical Power Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

rx085labelOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.35
The value of this object provides the label of the Optical Power Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085uomOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.36
The value of this object provides the Unit of Measure of the Optical Power Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085majorHighOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.37
The value of this object provides the Major High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085majorLowOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.38
The value of this object provides the Major Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorHighOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.39
The value of this object provides the Minor High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorLowOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.40
The value of this object provides the Minor Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085currentValueOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.41
The value of this object provides the Current value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085stateFlagOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.42
The value of this object provides the state of the Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085minValueOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.43
The value of this object provides the minimum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085maxValueOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.44
The value of this object provides the maximum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085alarmStateOptPowerFour 1.3.6.1.4.1.1166.6.1.2.32.2.1.45
The value of this object provides the curent alarm state of the Optical Power Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

rx085labelModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.46
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085uomModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.47
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085majorHighModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.48
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085majorLowModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.49
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorHighModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.50
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorLowModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.51
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085currentValueModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.52
The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085stateFlagModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.53
The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085minValueModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.54
The value of this object provides the minimum value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085maxValueModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.55
The value of this object provides the maximum value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085alarmStateModTemp 1.3.6.1.4.1.1166.6.1.2.32.2.1.56
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

rx085labelFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.57
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085uomFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.58
The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085majorHighFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.59
The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085majorLowFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.60
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorHighFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.61
The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorLowFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.62
The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085currentValueFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.63
The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085stateFlagFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.64
The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085minValueFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.65
The value of this object provides the minimum value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085maxValueFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.66
The value of this object provides the maximum value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085alarmStateFanCurrent 1.3.6.1.4.1.1166.6.1.2.32.2.1.67
The value of this object provides the curent alarm state of the Fan Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

rx085label12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.68
The value of this object provides the label of the 12v Current Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085uom12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.69
The value of this object provides the Unit of Measure of the 12v Current Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085majorHigh12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.70
The value of this object provides the Major High alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085majorLow12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.71
The value of this object provides the Major Low alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorHigh12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.72
The value of this object provides the Minor High alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085minorLow12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.73
The value of this object provides the Minor Low alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085currentValue12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.74
The value of this object provides the Current value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085stateFlag12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.75
The value of this object provides the state of the 12v Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085minValue12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.76
The value of this object provides the minimum value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085maxValue12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.77
The value of this object provides the maximum value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

rx085alarmState12Volt 1.3.6.1.4.1.1166.6.1.2.32.2.1.78
The value of this object provides the curent alarm state of the 12v Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

gx2Rx085BX4DigitalTableIndex 1.3.6.1.4.1.1166.6.1.2.32.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

rx085labelModeOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.2
The value of this object provides the label of the Rx085BX4's Mode Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumModeOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueModeOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.4
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), manual(2), agc(3)  

rx085stateFlagModeOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.5
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelWavelengthOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.6
The value of this object provides the label of the Rx085BX4's Wavelength Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumWavelengthOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.7
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueWavelengthOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.8
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nM1270(1), nM1290(2), nM1310(3), nM1330(4), nM1350(5), nM1370(6), nM1390(7), nM1410(8), nM1430(9), nM1450(10), nM1470(11), nM1490(12), nM1510(13), nM1530(14), nM1550(15), nM1570(16), nM1590(17), nM1610(18)  

rx085stateFlagWavelengthOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.9
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelAttnSettingOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.10
The value of this object provides the label of the Rx085BX4's AttnSetting Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumAttnSettingOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.11
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueAttnSettingOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.12
The value of this object is the current value of the parameter. It is an integer value from 0 to 60. Each increment represents 1/2 dB of attenuation from 0 to 30 dB. Where 0 = 0db and 60 = 30db
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rx085stateFlagAttnSettingOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelSwModeSettingOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.14
The value of this object provides the label of the Rx085BX4's Switch Mode Setting Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumSwModeSettingOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.15
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueSwModeSettingOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.16
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), alarm-only(2), alarm-and-switch(3)  

rx085stateFlagSwModeSettingOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.17
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelSwModeThresholdOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.18
The value of this object provides the label of the Rx085BX4's Switch Mode Threshold Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumSwModeThresholdOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.19
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueSwModeThresholdOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.20
The value of this object reflects the setting of the threshold at which the Optical Input Failed signal is sent. It is in 1 dB increments ranging from -2 to -17 dB. The user can enter a number from 0 to 15, where 0 = -2db and 15= -17db
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rx085stateFlagSwModeThresholdOne 1.3.6.1.4.1.1166.6.1.2.32.3.2.21
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelModeTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.22
The value of this object provides the label of the Rx085BX4's Mode Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumModeTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.23
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueModeTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.24
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), manual(2), agc(3)  

rx085stateFlagModeTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.25
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelWavelengthTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.26
The value of this object provides the label of the Rx085BX4's Wavelength Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumWavelengthTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.27
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueWavelengthTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.28
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nM1270(1), nM1290(2), nM1310(3), nM1330(4), nM1350(5), nM1370(6), nM1390(7), nM1410(8), nM1430(9), nM1450(10), nM1470(11), nM1490(12), nM1510(13), nM1530(14), nM1550(15), nM1570(16), nM1590(17), nM1610(18)  

rx085stateFlagWavelengthTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.29
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelAttnSettingTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.30
The value of this object provides the label of the Rx085BX4's AttnSetting Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumAttnSettingTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.31
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueAttnSettingTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.32
The value of this object is the current value of the parameter. It is an integer value from 0 to 40. Each increment represents 1/2 dB of attenuation from 0 to 20 dB. Where 0 = 0db and 40 = 20db
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rx085stateFlagAttnSettingTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.33
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelSwModeSettingTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.34
The value of this object provides the label of the Rx085BX4's Switch Mode Setting Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumSwModeSettingTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.35
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueSwModeSettingTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.36
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), alarm-only(2), alarm-and-switch(3)  

rx085stateFlagSwModeSettingTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.37
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelSwModeThresholdTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.38
The value of this object provides the label of the Rx085BX4's Switch Mode Threshold Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumSwModeThresholdTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.39
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueSwModeThresholdTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.40
The value of this object reflects the setting of the threshold at which the Optical Input Failed signal is sent. It is in 1 dB increments ranging from -2 to -17 dB. The user can enter a number from 0 to 15, where 0 = -2db and 15= -17db
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rx085stateFlagSwModeThresholdTwo 1.3.6.1.4.1.1166.6.1.2.32.3.2.41
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelModeThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.42
The value of this object provides the label of the Rx085BX4's Mode Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumModeThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.43
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueModeThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.44
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), manual(2), agc(3)  

rx085stateFlagModeThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.45
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelWavelengthThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.46
The value of this object provides the label of the Rx085BX4's Wavelength Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumWavelengthThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.47
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueWavelengthThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.48
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nM1270(1), nM1290(2), nM1310(3), nM1330(4), nM1350(5), nM1370(6), nM1390(7), nM1410(8), nM1430(9), nM1450(10), nM1470(11), nM1490(12), nM1510(13), nM1530(14), nM1550(15), nM1570(16), nM1590(17), nM1610(18)  

rx085stateFlagWavelengthThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.49
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelAttnSettingThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.50
The value of this object provides the label of the Rx085BX4's AttnSetting Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumAttnSettingThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.51
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueAttnSettingThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.52
The value of this object is the current value of the parameter. It is an integer value from 0 to 40. Each increment represents 1/2 dB of attenuation from 0 to 20 dB. Where 0 = 0db and 40 = 20db
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rx085stateFlagAttnSettingThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.53
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelSwModeSettingThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.54
The value of this object provides the label of the Rx085BX4's Switch Mode Setting Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumSwModeSettingThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.55
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueSwModeSettingThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.56
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), alarm-only(2), alarm-and-switch(3)  

rx085stateFlagSwModeSettingThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.57
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelSwModeThresholdThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.58
The value of this object provides the label of the Rx085BX4's Switch Mode Threshold Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumSwModeThresholdThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.59
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueSwModeThresholdThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.60
The value of this object reflects the setting of the threshold at which the Optical Input Failed signal is sent. It is in 1 dB increments ranging from -2 to -17 dB. The user can enter a number from 0 to 15, where 0 = -2db and 15= -17db
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rx085stateFlagSwModeThresholdThree 1.3.6.1.4.1.1166.6.1.2.32.3.2.61
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelModeFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.62
The value of this object provides the label of the Rx085BX4's Mode Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumModeFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.63
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueModeFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.64
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), manual(2), agc(3)  

rx085stateFlagModeFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.65
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelWavelengthFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.66
The value of this object provides the label of the Rx085BX4's Wavelength Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumWavelengthFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.67
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueWavelengthFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.68
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nM1270(1), nM1290(2), nM1310(3), nM1330(4), nM1350(5), nM1370(6), nM1390(7), nM1410(8), nM1430(9), nM1450(10), nM1470(11), nM1490(12), nM1510(13), nM1530(14), nM1550(15), nM1570(16), nM1590(17), nM1610(18)  

rx085stateFlagWavelengthFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.69
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelAttnSettingFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.70
The value of this object provides the label of the Rx085BX4's AttnSetting Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumAttnSettingFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.71
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueAttnSettingFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.72
The value of this object is the current value of the parameter. It is an integer value from 0 to 40. Each increment represents 1/2 dB of attenuation from 0 to 20 dB. Where 0 = 0db and 40 = 20db
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rx085stateFlagAttnSettingFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.73
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelSwModeSettingFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.74
The value of this object provides the label of the Rx085BX4's Switch Mode Setting Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumSwModeSettingFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.75
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueSwModeSettingFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.76
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), alarm-only(2), alarm-and-switch(3)  

rx085stateFlagSwModeSettingFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.77
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelSwModeThresholdFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.78
The value of this object provides the label of the Rx085BX4's Switch Mode Threshold Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumSwModeThresholdFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.79
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueSwModeThresholdFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.80
The value of this object reflects the setting of the threshold at which the Optical Input Failed signal is sent. It is in 1 dB increments ranging from -2 to -17 dB. The user can enter a number from 0 to 15, where 0 = -2db and 15= -17db
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rx085stateFlagSwModeThresholdFour 1.3.6.1.4.1.1166.6.1.2.32.3.2.81
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelModuleConfig 1.3.6.1.4.1.1166.6.1.2.32.3.2.82
The value of this object provides the label of the Factory Default Reset Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumModuleConfig 1.3.6.1.4.1.1166.6.1.2.32.3.2.83
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueModuleConfig 1.3.6.1.4.1.1166.6.1.2.32.3.2.84
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER slave(1), master(2), burst(3)  

rx085stateFlagModuleConfig 1.3.6.1.4.1.1166.6.1.2.32.3.2.85
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelRevertTime 1.3.6.1.4.1.1166.6.1.2.32.3.2.86
The value of this object provides the label of the Factory Default Reset Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumRevertTime 1.3.6.1.4.1.1166.6.1.2.32.3.2.87
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueRevertTime 1.3.6.1.4.1.1166.6.1.2.32.3.2.88
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one-sec(1), ten-sec(2), sixty-sec(3), six-hundred-sec(4)  

rx085stateFlagRevertTime 1.3.6.1.4.1.1166.6.1.2.32.3.2.89
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelTestPointSelect 1.3.6.1.4.1.1166.6.1.2.32.3.2.90
The value of this object provides the label of the Test point Select Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumTestPointSelect 1.3.6.1.4.1.1166.6.1.2.32.3.2.91
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueTestPointSelect 1.3.6.1.4.1.1166.6.1.2.32.3.2.92
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4)  

rx085stateFlagTestPointSelect 1.3.6.1.4.1.1166.6.1.2.32.3.2.93
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelFactoryDefault 1.3.6.1.4.1.1166.6.1.2.32.3.2.94
The value of this object provides the label of the Factory Default Reset Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085enumFactoryDefault 1.3.6.1.4.1.1166.6.1.2.32.3.2.95
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueFactoryDefault 1.3.6.1.4.1.1166.6.1.2.32.3.2.96
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

rx085stateFlagFactoryDefault 1.3.6.1.4.1.1166.6.1.2.32.3.2.97
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

gx2Rx085BX4StatusTableIndex 1.3.6.1.4.1.1166.6.1.2.32.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

rx085labelBoot 1.3.6.1.4.1.1166.6.1.2.32.4.3.2
The value of this object provides the label of the Boot Status Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueBoot 1.3.6.1.4.1.1166.6.1.2.32.4.3.3
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagBoot 1.3.6.1.4.1.1166.6.1.2.32.4.3.4
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelFlash 1.3.6.1.4.1.1166.6.1.2.32.4.3.5
The value of this object provides the label of the Flash Status Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueFlash 1.3.6.1.4.1.1166.6.1.2.32.4.3.6
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagFlash 1.3.6.1.4.1.1166.6.1.2.32.4.3.7
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelFactoryDataCRC 1.3.6.1.4.1.1166.6.1.2.32.4.3.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueFactoryDataCRC 1.3.6.1.4.1.1166.6.1.2.32.4.3.9
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagFactoryDataCRC 1.3.6.1.4.1.1166.6.1.2.32.4.3.10
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelAlarmDataCRC 1.3.6.1.4.1.1166.6.1.2.32.4.3.11
The value of this object provides the label of the Alarm Data CRC Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueAlarmDataCRC 1.3.6.1.4.1.1166.6.1.2.32.4.3.12
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagAlarmDataCRC 1.3.6.1.4.1.1166.6.1.2.32.4.3.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelCalibrationDataCRC 1.3.6.1.4.1.1166.6.1.2.32.4.3.14
The value of this object provides the label of the Calibration Data CRC Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueCalibrationDataCRC 1.3.6.1.4.1.1166.6.1.2.32.4.3.15
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagCalibrationDataCRC 1.3.6.1.4.1.1166.6.1.2.32.4.3.16
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelHW 1.3.6.1.4.1.1166.6.1.2.32.4.3.17
The value of this object provides the label of the Hardware Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueHW 1.3.6.1.4.1.1166.6.1.2.32.4.3.18
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagHW 1.3.6.1.4.1.1166.6.1.2.32.4.3.19
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelOptSigOne 1.3.6.1.4.1.1166.6.1.2.32.4.3.20
The value of this object provides the label of the Optical Signal Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueOptSigOne 1.3.6.1.4.1.1166.6.1.2.32.4.3.21
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagOptSigOne 1.3.6.1.4.1.1166.6.1.2.32.4.3.22
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelOptSigTwo 1.3.6.1.4.1.1166.6.1.2.32.4.3.23
The value of this object provides the label of the Optical Signal Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueOptSigTwo 1.3.6.1.4.1.1166.6.1.2.32.4.3.24
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagOptSigTwo 1.3.6.1.4.1.1166.6.1.2.32.4.3.25
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelOptSigThree 1.3.6.1.4.1.1166.6.1.2.32.4.3.26
The value of this object provides the label of the Optical Signal Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueOptSigThree 1.3.6.1.4.1.1166.6.1.2.32.4.3.27
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagOptSigThree 1.3.6.1.4.1.1166.6.1.2.32.4.3.28
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelOptSigFour 1.3.6.1.4.1.1166.6.1.2.32.4.3.29
The value of this object provides the label of the Optical Signal Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueOptSigFour 1.3.6.1.4.1.1166.6.1.2.32.4.3.30
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagOptSigFour 1.3.6.1.4.1.1166.6.1.2.32.4.3.31
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

rx085labelBackupCable 1.3.6.1.4.1.1166.6.1.2.32.4.3.32
The value of this object provides the label of the Backup Cable Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085valueBackupCable 1.3.6.1.4.1.1166.6.1.2.32.4.3.33
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

rx085stateflagBackupCable 1.3.6.1.4.1.1166.6.1.2.32.4.3.34
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

gx2Rx085BX4FactoryTableIndex 1.3.6.1.4.1.1166.6.1.2.32.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

rx085bootControlByte 1.3.6.1.4.1.1166.6.1.2.32.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rx085bootStatusByte 1.3.6.1.4.1.1166.6.1.2.32.5.4.3
This object indicates the status of the last boot
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rx085bank0CRC 1.3.6.1.4.1.1166.6.1.2.32.5.4.4
This object provides the CRC code of bank 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rx085bank1CRC 1.3.6.1.4.1.1166.6.1.2.32.5.4.5
This object provides the CRC code of bank 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rx085prgEEPROMByte 1.3.6.1.4.1.1166.6.1.2.32.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rx085factoryCRC 1.3.6.1.4.1.1166.6.1.2.32.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rx085calculateCRC 1.3.6.1.4.1.1166.6.1.2.32.5.4.8
This object indicates which of the Emnums will have the CRC calculated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER factory(1), calibration(2), alarm(3), tempComp(4)  

rx085hourMeter 1.3.6.1.4.1.1166.6.1.2.32.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rx085flashPrgCntA 1.3.6.1.4.1.1166.6.1.2.32.5.4.10
This object provides the number of times the flash has been programmed on side A.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rx085flashPrgCntB 1.3.6.1.4.1.1166.6.1.2.32.5.4.11
This object provides the number of times the flash has been programmed on side B.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rx085fwRev0 1.3.6.1.4.1.1166.6.1.2.32.5.4.12
This object provides the Revision of the firmware stores in bank 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rx085fwRev1 1.3.6.1.4.1.1166.6.1.2.32.5.4.13
This object provides the Revision of the firmware stores in bank 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

trapRx085BX4ConfigChangeInteger 1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE    

trapRx085BX4ConfigChangeDisplayString 2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE    

trapRx085BX4OpticalPower1Alarm 3
This trap is issued when the Receiver's channel 1 Optical Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4OpticalPower2Alarm 4
This trap is issued when the Receiver's channel 2 Optical Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4OpticalPower3Alarm 5
This trap is issued when the Receiver's channel 3 Optical Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4OpticalPower4Alarm 6
This trap is issued when the Receiver's channel 4 Optical Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4ModuleTemperatureAlarm 7
This trap is issued when the Rx085BX4 Modules Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4FanCurrentAlarm 8
This trap is issued when the Rx085BX4 Modules Fan Currrent parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Plus12CurrentAlarm 9
This trap is issued when the Rx085BX4 Modules positive 12 volt current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Boot0Alarm 10
This trap is issued when the Rx085BX4 Modules Bank 0 Boot sequence has detected an error. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Boot1Alarm 11
This trap is issued when the Rx085BX4 Modules Bank 1 Boot sequence has detected an error. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4FlashAlarm 12
This trap is issued when the Rx085BX4 Modules boot or flash programming sequence has detected a Flash error. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4AlarmDataCRCAlarm 13
This trap is issued when the Rx085BX4 Module detects an error calculating the alarm limit CRC. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4FactoryDataCRCAlarm 14
This trap is issued when the Rx085BX4 Module detects an error calculating the Factory data CRC. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4CalDataCRCAlarm 15
This trap is issued when the Rx085BX4 Module detects an error calculating the Calibration data CRC. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4DefaultAlarm 16
This trap is issued when the Rx085BX4 Module is reset to it's factory default state. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Mode1Alarm 17
This trap is issued when the Rx085BX4 Modules receiver 1 mode is changed from manual or AGC to off and back. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Mode2Alarm 18
This trap is issued when the Rx085BX4 Modules receiver 1 mode is changed from manual or AGC to off and back. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Mode3Alarm 19
This trap is issued when the Rx085BX4 Modules receiver 1 mode is changed from manual or AGC to off and back. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Mode4Alarm 20
This trap is issued when the Rx085BX4 Modules receiver 1 mode is changed from manual or AGC to off and back. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Output1SwitchedAlarm 21
This trap is issued when the Rx085BX4 Module's receiver 1 output to the RF Switch Module changes state from good to bad or bad to good. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Output2SwitchedAlarm 22
This trap is issued when the Rx085BX4 Module's receiver 2 output to the RF Switch Module changes state from good to bad or bad to good. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Output3SwitchedAlarm 23
This trap is issued when the Rx085BX4 Module's receiver 3 output to the RF Switch Module changes state from good to bad or bad to good. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4Output4SwitchedAlarm 24
This trap is issued when the Rx085BX4 Module's receiver 4 output to the RF Switch Module changes state from good to bad or bad to good. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapRx085BX4RX1StatusAlarm 25
This trap is issued when receiver 1 of the Rx085BX4 Module output is turned on or off.
TRAP-TYPE    

trapRx085BX4RX2StatusAlarm 26
This trap is issued when receiver 2 of the Rx085BX4 Module output is turned on or off.
TRAP-TYPE    

trapRx085BX4RX3StatusAlarm 27
This trap is issued when receiver 3 of the Rx085BX4 Module output is turned on or off.
TRAP-TYPE    

trapRx085BX4RX4StatusAlarm 28
This trap is issued when receiver 4 of the Rx085BX4 Module output is turned on or off.
TRAP-TYPE    

trapRx085BX4BackupCableAlarm 29
This trap is issued when the slave receiver loses connection to the master receiver.
TRAP-TYPE    

trapRx085BX4OptPwr1BadAlarm 30
This trap is issued when the receiver 1 optical power level falls below the user set switching threshold.
TRAP-TYPE    

trapRx085BX4OptPwr2BadAlarm 31
This trap is issued when the receiver 2 optical power level falls below the user set switching threshold.
TRAP-TYPE    

trapRx085BX4OptPwr3BadAlarm 32
This trap is issued when the receiver 3 optical power level falls below the user set switching threshold.
TRAP-TYPE    

trapRx085BX4OptPwr4BadAlarm 33
This trap is issued when the receiver 4 optical power level falls below the user set switching threshold.
TRAP-TYPE