OMNI-gx2PSDC-MIB

File: OMNI-gx2PSDC-MIB.mib (82151 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215	NLS-BBNIDENT-MIB	GX2HFC-MIB
NLSBBN-TRAPS-MIB

Imported symbols

IpAddress	TimeTicks	Counter
OBJECT-TYPE	sysUpTime	DisplayString
TRAP-TYPE	gi	motproxies
gx2Psdc	trapIdentifier	trapNetworkElemModelNumber
trapNetworkElemSerialNum	trapPerceivedSeverity	trapNetworkElemOperState
trapNetworkElemAlarmStatus	trapNetworkElemAdminState	trapNetworkElemAvailStatus
trapText	trapNETrapLastTrapTimeStamp	trapChangedObjectId
trapChangedValueInteger	trapChangedValueDisplayString

Defined Types

Float
Counter

Gx2PsdcAnalogEntry
SEQUENCE
	gx2PsdcAnalogTableIndex	INTEGER
	pslabelFanCurrent	DisplayString	Size(0..80)
	psuomFanCurrent	DisplayString	Size(0..80)
	psmajorHighFanCurrent	Float
	psmajorLowFanCurrent	Float
	psminorHighFanCurrent	Float
	psminorLowFanCurrent	Float
	pscurrentValueFanCurrent	Float
	psstateFlagFanCurrent	INTEGER
	psminValueFanCurrent	Float
	psmaxValueFanCurrent	Float
	psalarmStateFanCurrent	INTEGER
	pslabel12Volt	DisplayString	Size(0..80)
	psuom12Volt	DisplayString	Size(0..80)
	psmajorHigh12Volt	Float
	psmajorLow12Volt	Float
	psminorHigh12Volt	Float
	psminorLow12Volt	Float
	pscurrentValue12Volt	Float
	psstateFlag12Volt	INTEGER
	psminValue12Volt	Float
	psmaxValue12Volt	Float
	psalarmState12Volt	INTEGER
	pslabel5Volt	DisplayString	Size(0..80)
	psuom5Volt	DisplayString	Size(0..80)
	psmajorHigh5Volt	Float
	psmajorLow5Volt	Float
	psminorHigh5Volt	Float
	psminorLow5Volt	Float
	pscurrentValue5Volt	Float
	psstateFlag5Volt	INTEGER
	psminValue5Volt	Float
	psmaxValue5Volt	Float
	psalarmState5Volt	INTEGER
	pslabel3Volt	DisplayString	Size(0..80)
	psuom3Volt	DisplayString	Size(0..80)
	psmajorHigh3Volt	Float
	psmajorLow3Volt	Float
	psminorHigh3Volt	Float
	psminorLow3Volt	Float
	pscurrentValue3Volt	Float
	psstateFlag3Volt	INTEGER
	psminValue3Volt	Float
	psmaxValue3Volt	Float
	psalarmState3Volt	INTEGER
	pslabelAmbientTemp	DisplayString	Size(0..80)
	psuomAmbientTemp	DisplayString	Size(0..80)
	psmajorHighAmbientTemp	Float
	psmajorLowAmbientTemp	Float
	psminorHighAmbientTemp	Float
	psminorLowAmbientTemp	Float
	pscurrentValueAmbientTemp	Float
	psstateFlagAmbientTemp	INTEGER
	psminValueAmbientTemp	Float
	psmaxValueAmbientTemp	Float
	psalarmStateAmbientTemp	INTEGER
	pslabelMainTemp	DisplayString	Size(0..80)
	psuomMainTemp	DisplayString	Size(0..80)
	psmajorHighMainTemp	Float
	psmajorLowMainTemp	Float
	psminorHighMainTemp	Float
	psminorLowMainTemp	Float
	pscurrentValueMainTemp	Float
	psstateFlagMainTemp	INTEGER
	psminValueMainTemp	Float
	psmaxValueMainTemp	Float
	psalarmStateMainTemp	INTEGER
	pslabel12AnodeVolt	DisplayString	Size(0..80)
	psuom12AnodeVolt	DisplayString	Size(0..80)
	psmajorHigh12AnodeVolt	Float
	psmajorLow12AnodeVolt	Float
	psminorHigh12AnodeVolt	Float
	psminorLow12AnodeVolt	Float
	pscurrentValue12AnodeVolt	Float
	psstateFlag12AnodeVolt	INTEGER
	psminValue12AnodeVolt	Float
	psmaxValue12AnodeVolt	Float
	psalarmState12AnodeVolt	INTEGER
	pslabel5AnodeVolt	DisplayString	Size(0..80)
	psuom5AnodeVolt	DisplayString	Size(0..80)
	psmajorHigh5AnodeVolt	Float
	psmajorLow5AnodeVolt	Float
	psminorHigh5AnodeVolt	Float
	psminorLow5AnodeVolt	Float
	pscurrentValue5AnodeVolt	Float
	psstateFlag5AnodeVolt	INTEGER
	psminValue5AnodeVolt	Float
	psmaxValue5AnodeVolt	Float
	psalarmState5AnodeVolt	INTEGER
	pslabel3AnodeVolt	DisplayString	Size(0..80)
	psuom3AnodeVolt	DisplayString	Size(0..80)
	psmajorHigh3AnodeVolt	Float
	psmajorLow3AnodeVolt	Float
	psminorHigh3AnodeVolt	Float
	psminorLow3AnodeVolt	Float
	pscurrentValue3AnodeVolt	Float
	psstateFlag3AnodeVolt	INTEGER
	psminValue3AnodeVolt	Float
	psmaxValue3AnodeVolt	Float
	psalarmState3AnodeVolt	INTEGER

Gx2PsdcDigitalEntry
SEQUENCE
	gx2PsdcDigitalTableIndex	INTEGER
	psdclabelNVfanAlrm	DisplayString	Size(0..80)
	psdcenumNVfanAlrm	DisplayString	Size(0..80)
	psdcvalueNVfanAlrm	INTEGER
	psdcstateflagNVfanAlrm	INTEGER

Gx2PsdcStatusEntry
SEQUENCE
	gx2PsdcStatusTableIndex	INTEGER
	pslabelBoot	DisplayString	Size(0..80)
	psvalueBoot	INTEGER
	psstateflagBoot	INTEGER
	pslabelFlash	DisplayString	Size(0..80)
	psvalueFlash	INTEGER
	psstateflagFlash	INTEGER
	pslabelFactoryDataCRC	DisplayString	Size(0..80)
	psvalueFactoryDataCRC	INTEGER
	psstateflagFactoryDataCRC	INTEGER
	pslabelPsdcDataCRC	DisplayString	Size(0..80)
	psvaluePsdcDataCRC	INTEGER
	psstateflagPsdcDataCRC	INTEGER
	pslabelPsdcHwStatus	DisplayString	Size(0..80)
	psvaluePsdcHwStatus	INTEGER
	psstateflagPsdcHwStatus	INTEGER

Gx2PsdcFactoryEntry
SEQUENCE
	gx2PsdcFactoryTableIndex	INTEGER
	psbootControlByteValue	INTEGER
	psbootStatusByteValue	INTEGER
	psbank1CRCValue	INTEGER
	psbank2CRCValue	INTEGER
	psprgEEPROMByteValue	INTEGER
	psfactoryCRCValue	INTEGER
	pscalculateCRCValue	INTEGER
	pshourMeterValue	INTEGER
	psflashPrgCntAValue	INTEGER
	psflashPrgCntBValue	INTEGER
	psflashBankARevValue	DisplayString	Size(0..80)
	psflashBankBRevValue	DisplayString	Size(0..80)

Gx2PsdcHoldTimeEntry
SEQUENCE
	rxgx2PsdcHoldTimeTableIndex	INTEGER
	rxgx2PsdcHoldTimeSpecIndex	INTEGER
	rxgx2PsdcHoldTimeData	INTEGER

Defined Values

gx2PsdcDescriptor		1.3.6.1.4.1.1166.6.1.2.7.1
OBJECT IDENTIFIER

gx2PsdcAnalogTable		1.3.6.1.4.1.1166.6.1.2.7.2
This table contains gx2Psdc specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2PsdcAnalogEntry

gx2PsdcAnalogEntry		1.3.6.1.4.1.1166.6.1.2.7.2.1
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2PsdcAnalogEntry

gx2PsdcStatusTable		1.3.6.1.4.1.1166.6.1.2.7.3
This table contains gx2Psdc specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2PsdcStatusEntry

gx2PsdcStatusEntry		1.3.6.1.4.1.1166.6.1.2.7.3.2
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2PsdcStatusEntry

gx2PsdcFactoryTable		1.3.6.1.4.1.1166.6.1.2.7.4
This table contains gx2Psdc specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2PsdcFactoryEntry

gx2PsdcFactoryEntry		1.3.6.1.4.1.1166.6.1.2.7.4.3
This list contains Factory parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2PsdcFactoryEntry

gx2PsdcHoldTimeTable		1.3.6.1.4.1.1166.6.1.2.7.5
This table contains gx2Psdc specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2PsdcHoldTimeEntry

gx2PsdcHoldTimeEntry		1.3.6.1.4.1.1166.6.1.2.7.5.4
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2PsdcHoldTimeEntry

gx2PsdcDigitalTable		1.3.6.1.4.1.1166.6.1.2.7.6
This table contains gx2Psdc specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2PsdcDigitalEntry

gx2PsdcDigitalEntry		1.3.6.1.4.1.1166.6.1.2.7.6.5
This list contains digital parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2PsdcDigitalEntry

gx2PsdcAnalogTableIndex		1.3.6.1.4.1.1166.6.1.2.7.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

pslabelFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.2
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psuomFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.3
The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psmajorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.4
The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmajorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.5
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.6
The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.7
The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

pscurrentValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.8
The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psstateFlagFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.9
The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

psminValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.10
The value of this object provides the minimum value the Fan Current Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmaxValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.11
The value of this object provides the maximum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psalarmStateFanCurrent		1.3.6.1.4.1.1166.6.1.2.7.2.1.12
The value of this object provides the curent alarm state of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

pslabel12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.13
The value of this object provides the label of the 12 Volt Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psuom12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.14
The value of this object provides the unit of measure of the 12 Volt Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psmajorHigh12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.15
The value of this object provides the Major High alarm value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmajorLow12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.16
The value of this object provides the Major Low alarm value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorHigh12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.17
The value of this object provides the Minor High alarm value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorLow12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.18
The value of this object provides the Minor Low alarm value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

pscurrentValue12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.19
The value of this object provides the Current value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psstateFlag12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.20
The value of this object provides the state of the 12 Volt Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

psminValue12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.21
The value of this object provides the minimum value the 12 Volt Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmaxValue12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.22
The value of this object provides the maximum value the 12 Volt Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psalarmState12Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.23
The value of this object provides the curent alarm state of the 12 Volt Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

pslabel5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.24
The value of this object provides the label of the Attenuator Setting Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psuom5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.25
The value of this object provides the Unit of Measure of the 5 Volt Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psmajorHigh5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.26
The value of this object provides the Major High alarm value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmajorLow5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.27
The value of this object provides the Major Low alarm value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorHigh5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.28
The value of this object provides the Minor High alarm value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorLow5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.29
The value of this object provides the Minor Low alarm value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

pscurrentValue5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.30
The value of this object provides the Current value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psstateFlag5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.31
The value of this object provides the state of the 5 Volt Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

psminValue5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.32
The value of this object provides the minimum value the 5 Volt Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmaxValue5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.33
The value of this object provides the maximum value the 5 Volt Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psalarmState5Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.34
The value of this object provides the curent alarm state of the 5 Volt Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

pslabel3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.35
The value of this object provides the label of the 3 Anode Volt Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psuom3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.36
The value of this object provides the Unit of Measure of the 3.7V anode voltage analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psmajorHigh3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.37
The value of this object provides the Major High alarm value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmajorLow3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.38
The value of this object provides the Major Low alarm value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorHigh3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.39
The value of this object provides the Minor High alarm value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorLow3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.40
The value of this object provides the Minor Low alarm value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

pscurrentValue3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.41
The value of this object provides the Current value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psstateFlag3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.42
The value of this object provides the state of the 3 Volt Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

psminValue3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.43
The value of this object provides the minimum value that the 3.7V anode voltage analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmaxValue3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.44
The value of this object provides the maximum value that the 3.7V anode voltage analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psalarmState3Volt		1.3.6.1.4.1.1166.6.1.2.7.2.1.45
The value of this object provides the curent alarm state of the 3.7V anode voltage analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

pslabelAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.46
The value of this object provides the label of the Ambient Temperature Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psuomAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.47
The value of this object provides the Unit of Measure of the Ambient Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psmajorHighAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.48
The value of this object provides the Major High alarm value of the Ambient Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmajorLowAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.49
The value of this object provides the Major Low alarm value of the Ambient Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorHighAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.50
The value of this object provides the Minor High alarm value of the Ambient Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorLowAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.51
The value of this object provides the Minor Low alarm value of the Ambient Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

pscurrentValueAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.52
The value of this object provides the Current value of the Ambient Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psstateFlagAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.53
The value of this object provides the state of the Ambient Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

psminValueAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.54
The value of this object provides the minimum value the Ambient Temperature Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmaxValueAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.55
The value of this object provides the maximum value the Ambient Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psalarmStateAmbientTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.56
The value of this object provides the curent alarm state of the Ambient Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

pslabelMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.57
The value of this object provides the label of the Main Board Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psuomMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.58
The value of this object provides the Unit of Measure of the Main Board Temperature Analog parameter..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psmajorHighMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.59
The value of this object provides the Major High alarm value of the Main Board Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmajorLowMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.60
The value of this object provides the Major Low alarm value of the Main Board Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorHighMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.61
The value of this object provides the Minor High alarm value of the Main Board Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorLowMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.62
The value of this object provides the Minor Low alarm value of the Main Board Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

pscurrentValueMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.63
The value of this object provides the Current value of the Main Board Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psstateFlagMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.64
The value of this object provides the state of the Main Board Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

psminValueMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.65
The value of this object provides the minimum value the Main Board Temperature Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmaxValueMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.66
The value of this object provides the maximum value the Main Board Temperature Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psalarmStateMainTemp		1.3.6.1.4.1.1166.6.1.2.7.2.1.67
The value of this object provides the curent alarm state of the Main Board Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

pslabel12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.68
The value of this object provides the label of the +12 Anode Voltage Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psuom12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.69
The value of this object provides the Unit of Measure of the +12 Anode Voltage Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psmajorHigh12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.70
The value of this object provides the Major High alarm value of the +12V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmajorLow12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.71
The value of this object provides the Major Low alarm value of the +12V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorHigh12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.72
The value of this object provides the Minor High alarm value of the +12V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorLow12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.73
The value of this object provides the Minor Low alarm value of the +12V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

pscurrentValue12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.74
The value of this object provides the Current value of the +12V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psstateFlag12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.75
The value of this object provides the state of the +12V anode voltage analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

psminValue12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.76
The value of this object provides the minimum value the +12V anode voltage analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmaxValue12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.77
The value of this object provides the maximum value the +12V anode voltage analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psalarmState12AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.78
The value of this object provides the curent alarm state of the +12V anode voltage analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

pslabel5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.79
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psuom5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.80
The value of this object provides the Unit of Measure of the 5 Anode Volt Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psmajorHigh5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.81
The value of this object provides the Major High alarm value of the 5V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmajorLow5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.82
The value of this object provides the Major Low alarm value of the 5V anode volt analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorHigh5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.83
The value of this object provides the Minor High alarm value of the 5V anode volt analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorLow5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.84
The value of this object provides the Minor Low alarm value of the 5V anode volt analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

pscurrentValue5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.85
The value of this object provides the Current value of the 5V anode volt analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psstateFlag5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.86
The value of this object provides the state of the 5 Anode Volt Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

psminValue5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.87
The value of this object provides the minimum value the 5V anode volt analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmaxValue5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.88
The value of this object provides the maximum value the 5V anode volt analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psalarmState5AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.89
The value of this object provides the curent alarm state of the 5V anode voltage analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

pslabel3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.90
The value of this object provides the label of the 3.7V anode voltage parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psuom3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.91
The value of this object provides the Unit of Measure of the 3.7V anode voltage parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psmajorHigh3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.92
The value of this object provides the Major High alarm value for the 3.7V anode voltage parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmajorLow3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.93
The value of this object provides the Major Low alarm value for the 3.7V anode voltage parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorHigh3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.94
The value of this object provides the Minor High alarm value for the 3.7V anode voltage parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psminorLow3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.95
The value of this object provides the Minor Low alarm value for the 3.7V anode voltage parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

pscurrentValue3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.96
The value of this object provides the Current value of the 3.7V anode voltage parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psstateFlag3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.97
The value of this object provides the state of the 3.7V anode voltage parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

psminValue3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.98
The value of this object provides the minimum value that 3.7V anode voltage parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psmaxValue3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.99
The value of this object provides the maximum value that 3.7V anode voltage parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

psalarmState3AnodeVolt		1.3.6.1.4.1.1166.6.1.2.7.2.1.100
The value of this object provides the curent alarm state of the 3.7V anode voltage parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gx2PsdcDigitalTableIndex		1.3.6.1.4.1.1166.6.1.2.7.6.5.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

psdclabelNVfanAlrm		1.3.6.1.4.1.1166.6.1.2.7.6.5.2
The value of this object provides the label of the RF Input Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psdcenumNVfanAlrm		1.3.6.1.4.1.1166.6.1.2.7.6.5.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psdcvalueNVfanAlrm		1.3.6.1.4.1.1166.6.1.2.7.6.5.4
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), unacknowledged(2), acknowledged(3)

psdcstateflagNVfanAlrm		1.3.6.1.4.1.1166.6.1.2.7.6.5.5
The value of this object provides the state of the RF Input Control Digital parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2PsdcStatusTableIndex		1.3.6.1.4.1.1166.6.1.2.7.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

pslabelBoot		1.3.6.1.4.1.1166.6.1.2.7.3.2.2
The value of this object provides the label of the Boot Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psvalueBoot		1.3.6.1.4.1.1166.6.1.2.7.3.2.3
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

psstateflagBoot		1.3.6.1.4.1.1166.6.1.2.7.3.2.4
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

pslabelFlash		1.3.6.1.4.1.1166.6.1.2.7.3.2.5
The value of this object provides the label of the Flash Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psvalueFlash		1.3.6.1.4.1.1166.6.1.2.7.3.2.6
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

psstateflagFlash		1.3.6.1.4.1.1166.6.1.2.7.3.2.7
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

pslabelFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.7.3.2.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psvalueFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.7.3.2.9
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

psstateflagFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.7.3.2.10
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

pslabelPsdcDataCRC		1.3.6.1.4.1.1166.6.1.2.7.3.2.11
The value of this object provides the label of the Laser Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psvaluePsdcDataCRC		1.3.6.1.4.1.1166.6.1.2.7.3.2.12
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

psstateflagPsdcDataCRC		1.3.6.1.4.1.1166.6.1.2.7.3.2.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

pslabelPsdcHwStatus		1.3.6.1.4.1.1166.6.1.2.7.3.2.14
The value of this object provides the label of the Hw Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psvaluePsdcHwStatus		1.3.6.1.4.1.1166.6.1.2.7.3.2.15
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

psstateflagPsdcHwStatus		1.3.6.1.4.1.1166.6.1.2.7.3.2.16
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2PsdcFactoryTableIndex		1.3.6.1.4.1.1166.6.1.2.7.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

psbootControlByteValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.2
The value of this object indicates which bank the firmware is currently being boot from. Boot Control Byte bit definition as follows : bit 0 : boot bit (0=boot from bank 0, 1=boot from bank 1) bit 1 : bank 0 status (0=bank is blank/bad, 1=bank is OK) bit 2 : bank 1 status (0=bank is blank/bad, 1=bank is OK) bits 3-7 : not used
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psbootStatusByteValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.3
This object indicates the status of the last boot Boot Status Byte bit definitions as follows: bit 0 : bank 0 status (0=bank is OK or not used, 1=bank failed boot) bit 1 : bank 1 status (0=bank is OK or not used, 1=bank failed boot) bit 2 : active bank (0=bank 0 active, 1=bank 1 active) bits 3-7: not used
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psbank1CRCValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.4
This object provides the CRC code of bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psbank2CRCValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.5
This object provides the CRC code of bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psprgEEPROMByteValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.6
This object indicates if the EEPROM has been programmed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psfactoryCRCValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.7
This object provides the CRC code for the Factory data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pscalculateCRCValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.8
This object indicates which of the Emnums will have the CRC calculated. Calculate CRC command defintions as follows : 0x00 : recalculate factory data CRC 0x02 : recalculate alarm data CRC other values not defined
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	factory(1), na(2), alarm(3)

pshourMeterValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.9
This object provides the hour meter reading of the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psflashPrgCntAValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.10
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psflashPrgCntBValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psflashBankARevValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.12
This object provides the CRC code of bank 0. The value is best displayed in Hex format
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

psflashBankBRevValue		1.3.6.1.4.1.1166.6.1.2.7.4.3.13
This object provides the CRC code of bank 1. The value is best displayed in Hex format
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rxgx2PsdcHoldTimeTableIndex		1.3.6.1.4.1.1166.6.1.2.7.5.4.1
The value of this object is the index of the data object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

rxgx2PsdcHoldTimeSpecIndex		1.3.6.1.4.1.1166.6.1.2.7.5.4.2
The value of this object identifies the index of the alarm object to be modified.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

rxgx2PsdcHoldTimeData		1.3.6.1.4.1.1166.6.1.2.7.5.4.3
The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

trapPSDCConfigChangeInteger		1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapPSDCConfigChangeDisplayString		2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapPSDCFanCurrent		3
This trap is issued when a Fan Current event has occurred.
TRAP-TYPE

trapPSDC12Volt		4
This trap is issued when the 12 Volts is in an alarm condition.
TRAP-TYPE

trapPSDC5Volt		5
This trap is issued when the 5 Voltage is in an alarm condition.
TRAP-TYPE

trapPSDC3Volt		6
This trap is issued when the 3.7 Voltage is in an alarm condition.
TRAP-TYPE

trapPSDCAmbientTemp		7
This trap is issued when the Ambient Temperature is in an alarm condition.
TRAP-TYPE

trapPSDCMainTemp		8
This trap is issued when the Main Temperature is in an alarm condition.
TRAP-TYPE

trapPSDC12AnodeVolt		9
This trap is issued when the 12 Anode Voltage is in an alarm condition.
TRAP-TYPE

trapPSDC5AnodeVolt		10
This trap is issued when the 5 Anode Voltage is in an alarm condition.
TRAP-TYPE

trapPSDC3AnodeVolt		11
This trap is issued when the 3 Anode Voltage is in an alarm condition.
TRAP-TYPE

trapPSDCEEChksmAlarm		12
This trap is issued when the Power Supply EEPROM Factory data CRC fails.
TRAP-TYPE

trapPSDCFlashAlarm		13
This trap is issued when the embedded board flash has a problem.
TRAP-TYPE

trapPSDCBootAlarm		14
This trap is issued when the Module Boot from either bank fails.
TRAP-TYPE

trapPSDCAlarmReportingStatus		15
This trap is issued when the Alarm reporting is turned off.
TRAP-TYPE

trapPSbrickType		16
This trap is issued when power supply brick type is not a valid type.
TRAP-TYPE

trapPSsupplyFailure		17
This trap is issued when power supply fail condition occurs. (+12V , +5.1V, or _3.7V anode voltage out of spec.)
TRAP-TYPE

trapPSDCALARMChksmAlarm		18
This trap is issued when the Power Supply Alarm Data CRC check fails.
TRAP-TYPE