OMNI-gx2Dm200-MIB

File: OMNI-gx2Dm200-MIB.mib (79404 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215	GX2HFC-MIB	NLSBBN-TRAPS-MIB

Imported symbols

IpAddress	TimeTicks	Counter
OBJECT-TYPE	DisplayString	TRAP-TYPE
gx2Dm200	trapIdentifier	trapNetworkElemModelNumber
trapNetworkElemSerialNum	trapPerceivedSeverity	trapNetworkElemOperState
trapNetworkElemAlarmStatus	trapNetworkElemAdminState	trapNetworkElemAvailStatus
trapText	trapNETrapLastTrapTimeStamp	trapChangedObjectId
trapChangedValueInteger	trapChangedValueDisplayString

Defined Types

Float
Counter

Gx2Dm200AnalogEntry
SEQUENCE
	gx2Dm200AnalogTableIndex	INTEGER
	dm200labelOffsetNomMonitor	DisplayString	Size(0..80)
	dm200uomOffsetNomMonitor	DisplayString	Size(0..80)
	dm200majorHighOffsetNomMonitor	Float
	dm200majorLowOffsetNomMonitor	Float
	dm200minorHighOffsetNomMonitor	Float
	dm200minorLowOffsetNomMonitor	Float
	dm200currentValueOffsetNomMonitor	Float
	dm200stateFlagOffsetNomMonitor	INTEGER
	dm200minValueOffsetNomMonitor	Float
	dm200maxValueOffsetNomMonitor	Float
	dm200alarmStateOffsetNomMonitor	INTEGER
	dm200labelAttenSetting	DisplayString	Size(0..80)
	dm200uomAttenSetting	DisplayString	Size(0..80)
	dm200majorHighAttenSetting	Float
	dm200majorLowAttenSetting	Float
	dm200minorHighAttenSetting	Float
	dm200minorLowAttenSetting	Float
	dm200currentValueAttenSetting	Float
	dm200stateFlagAttenSetting	INTEGER
	dm200minValueAttenSetting	Float
	dm200maxValueAttenSetting	Float
	dm200alarmStateAttenSetting	INTEGER
	dm200labelLaserPower	DisplayString	Size(0..80)
	dm200uomLaserPower	DisplayString	Size(0..80)
	dm200majorHighLaserPower	Float
	dm200majorLowLaserPower	Float
	dm200minorHighLaserPower	Float
	dm200minorLowLaserPower	Float
	dm200currentValueLaserPower	Float
	dm200stateFlagLaserPower	INTEGER
	dm200minValueLaserPower	Float
	dm200maxValueLaserPower	Float
	dm200alarmStateLaserPower	INTEGER
	dm200labelLaserTemp	DisplayString	Size(0..80)
	dm200uomLaserTemp	DisplayString	Size(0..80)
	dm200majorHighLaserTemp	Float
	dm200majorLowLaserTemp	Float
	dm200minorHighLaserTemp	Float
	dm200minorLowLaserTemp	Float
	dm200currentValueLaserTemp	Float
	dm200stateFlagLaserTemp	INTEGER
	dm200minValueLaserTemp	Float
	dm200maxValueLaserTemp	Float
	dm200alarmStateLaserTemp	INTEGER
	dm200labelLaserCurrent	DisplayString	Size(0..80)
	dm200uomLaserCurrent	DisplayString	Size(0..80)
	dm200majorHighLaserCurrent	Float
	dm200majorLowLaserCurrent	Float
	dm200minorHighLaserCurrent	Float
	dm200minorLowLaserCurrent	Float
	dm200currentValueLaserCurrent	Float
	dm200stateFlagLaserCurrent	INTEGER
	dm200minValueLaserCurrent	Float
	dm200maxValueLaserCurrent	Float
	dm200alarmStateLaserCurrent	INTEGER
	dm200labelTecCurrent	DisplayString	Size(0..80)
	dm200uomTecCurrent	DisplayString	Size(0..80)
	dm200majorHighTecCurrent	Float
	dm200majorLowTecCurrent	Float
	dm200minorHighTecCurrent	Float
	dm200minorLowTecCurrent	Float
	dm200currentValueTecCurrent	Float
	dm200stateFlagTecCurrent	INTEGER
	dm200minValueTecCurrent	Float
	dm200maxValueTecCurrent	Float
	dm200alarmStateTecCurrent	INTEGER
	dm200labelModTemp	DisplayString	Size(0..80)
	dm200uomModTemp	DisplayString	Size(0..80)
	dm200majorHighModTemp	Float
	dm200majorLowModTemp	Float
	dm200minorHighModTemp	Float
	dm200minorLowModTemp	Float
	dm200currentValueModTemp	Float
	dm200stateFlagModTemp	INTEGER
	dm200minValueModTemp	Float
	dm200maxValueModTemp	Float
	dm200alarmStateModTemp	INTEGER
	dm200labelFanCurrent	DisplayString	Size(0..80)
	dm200uomFanCurrent	DisplayString	Size(0..80)
	dm200majorHighFanCurrent	Float
	dm200majorLowFanCurrent	Float
	dm200minorHighFanCurrent	Float
	dm200minorLowFanCurrent	Float
	dm200currentValueFanCurrent	Float
	dm200stateFlagFanCurrent	INTEGER
	dm200minValueFanCurrent	Float
	dm200maxValueFanCurrent	Float
	dm200alarmStateFanCurrent	INTEGER

Gx2Dm200DigitalEntry
SEQUENCE
	gx2Dm200DigitalTableIndex	INTEGER
	dm200labelRfInput	DisplayString	Size(0..80)
	dm200enumRfInput	DisplayString	Size(0..80)
	dm200valueRfInput	INTEGER
	dm200stateflagRfInput	INTEGER
	dm200labelOptOutput	DisplayString	Size(0..80)
	dm200enumOptOutput	DisplayString	Size(0..80)
	dm200valueOptOutput	INTEGER
	dm200stateflagOptOutput	INTEGER
	dm200labelSbsControl	DisplayString	Size(0..80)
	dm200enumSbsControl	DisplayString	Size(0..80)
	dm200valueSbsControl	INTEGER
	dm200stateflagSbsControl	INTEGER
	dm200labelFactoryDefault	DisplayString	Size(0..80)
	dm200enumFactoryDefault	DisplayString	Size(0..80)
	dm200valueFactoryDefault	INTEGER
	dm200stateflagFactoryDefault	INTEGER

Gx2Dm200StatusEntry
SEQUENCE
	gx2Dm200StatusTableIndex	INTEGER
	dm200labelBoot	DisplayString	Size(0..80)
	dm200valueBoot	INTEGER
	dm200stateflagBoot	INTEGER
	dm200labelFlash	DisplayString	Size(0..80)
	dm200valueFlash	INTEGER
	dm200stateflagFlash	INTEGER
	dm200labelFactoryDataCRC	DisplayString	Size(0..80)
	dm200valueFactoryDataCRC	INTEGER
	dm200stateflagFactoryDataCRC	INTEGER
	dm200labelLaserDataCRC	DisplayString	Size(0..80)
	dm200valueLaserDataCRC	INTEGER
	dm200stateflagLaserDataCRC	INTEGER
	dm200labelAlarmDataCrc	DisplayString	Size(0..80)
	dm200valueAlarmDataCrc	INTEGER
	dm200stateflagAlarmDataCrc	INTEGER
	dm200labelRFInputStatus	DisplayString	Size(0..80)
	dm200valueRFInputStatus	INTEGER
	dm200stateflagRFInputStatus	INTEGER

Gx2Dm200FactoryEntry
SEQUENCE
	gx2Dm200FactoryTableIndex	INTEGER
	dm200bootControlByte	INTEGER
	dm200bootStatusByte	INTEGER
	dm200bank1CRC	INTEGER
	dm200bank2CRC	INTEGER
	dm200prgEEPROMByte	INTEGER
	dm200factoryCRC	INTEGER
	dm200calculateCRC	INTEGER
	dm200hourMeter	INTEGER
	dm200flashPrgCntA	INTEGER
	dm200flashPrgCntB	INTEGER
	dm200flashBankARev	DisplayString	Size(0..80)
	dm200flashBankBRev	DisplayString	Size(0..80)

Defined Values

gx2Dm200Descriptor		1.3.6.1.4.1.1166.6.1.2.19.1
OBJECT IDENTIFIER

gx2Dm200AnalogTable		1.3.6.1.4.1.1166.6.1.2.19.2
This table contains gx2Dm200 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Dm200AnalogEntry

gx2Dm200AnalogEntry		1.3.6.1.4.1.1166.6.1.2.19.2.1
This list contains the analog parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Dm200AnalogEntry

gx2Dm200DigitalTable		1.3.6.1.4.1.1166.6.1.2.19.3
This table contains gx2Dm200m specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Dm200DigitalEntry

gx2Dm200DigitalEntry		1.3.6.1.4.1.1166.6.1.2.19.3.2
This list contains digital parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Dm200DigitalEntry

gx2Dm200StatusTable		1.3.6.1.4.1.1166.6.1.2.19.4
This table contains gx2Dm200 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Dm200StatusEntry

gx2Dm200StatusEntry		1.3.6.1.4.1.1166.6.1.2.19.4.3
This list contains Status parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Dm200StatusEntry

gx2Dm200FactoryTable		1.3.6.1.4.1.1166.6.1.2.19.5
This table contains gx2Dm200 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Dm200FactoryEntry

gx2Dm200FactoryEntry		1.3.6.1.4.1.1166.6.1.2.19.5.4
This list contains Factory parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Dm200FactoryEntry

gx2Dm200AnalogTableIndex		1.3.6.1.4.1.1166.6.1.2.19.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dm200labelOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.2
The value of this object provides the label of the Offset Monitor Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200uomOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.3
The value of this object provides the Unit of Measure of the Offset Monitor Analog parameter. The unit of measure for this parameter is dB
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200majorHighOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.4
The value of this object provides the Major High alarm value of the Offset Monitor Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200majorLowOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.5
The value of this object provides the Major Low alarm value of the Offset Monitor Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200minorHighOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.6
The value of this object provides the Minor High alarm value of the Offset Monitor Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200minorLowOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.7
The value of this object provides the Minor Low alarm value of the Offset Monitor Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200currentValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.8
The value of this object provides the Current value of the Offset Monitor Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200stateFlagOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.9
The value of this object provides the state of the Offset Monitor Power Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200minValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.10
The value of this object provides the minimum value the Offset Monitor Power Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200maxValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.11
The value of this object provides the maximum value the Offset Monitor Power Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200alarmStateOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.19.2.1.12
The value of this object provides the curent alarm state of the Offset Monitor Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm200labelAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.13
The value of this object provides the label of the Attenuator Setting Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200uomAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.14
The value of this object provides the Unit of Measure of the Attenuator Setting Analog parameter. The unit of measure for this parameter is dB
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200majorHighAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.15
The value of this object provides the Major High alarm value of the Attenuator Setting Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200majorLowAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.16
The value of this object provides the Major Low alarm value of the Attenuator Setting Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200minorHighAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.17
The value of this object provides the Minor High alarm value of the Attenuator Setting Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200minorLowAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.18
The value of this object provides the Minor Low alarm value of the Attenuator Setting Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200currentValueAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.19
The value of this object provides the Current value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

dm200stateFlagAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.20
The value of this object provides the state of the Attenuator Setting Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200minValueAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.21
The value of this object provides the minimum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200maxValueAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.22
The value of this object provides the maximum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200alarmStateAttenSetting		1.3.6.1.4.1.1166.6.1.2.19.2.1.23
The value of this object provides the curent alarm state of the Attenuator Setting Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm200labelLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.24
The value of this object provides the label of the Laser Optical Power Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200uomLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.25
The value of this object provides the Unit of Measure of the Laser Optical Power Analog parameter. The unit of measure for this parameter is dBm
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200majorHighLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.26
The value of this object provides the Major High alarm value of the Laser Optical Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200majorLowLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.27
The value of this object provides the Major Low alarm value of the Laser Optical Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200minorHighLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.28
The value of this object provides the Minor High alarm value of the Laser Optical Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200minorLowLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.29
The value of this object provides the Minor Low alarm value of the Laser Optical Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200currentValueLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.30
The value of this object provides the Current value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200stateFlagLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.31
The value of this object provides the state of the Laser Optical Power Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200minValueLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.32
The value of this object provides the minimum value the Laser Optical Power Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200maxValueLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.33
The value of this object provides the maximum value the Laser Optical Power Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200alarmStateLaserPower		1.3.6.1.4.1.1166.6.1.2.19.2.1.34
The value of this object provides the curent alarm state of the Laser Optical Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm200labelLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.35
The value of this object provides the label of the Laser Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200uomLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.36
The value of this object provides the Unit of Measure of the Laser Temperature Analog parameter. The unit of measure for this parameter is degrees C
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200majorHighLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.37
The value of this object provides the Major High alarm value of the Laser Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200majorLowLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.38
The value of this object provides the Major Low alarm value of the Laser Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200minorHighLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.39
The value of this object provides the Minor High alarm value of the Laser Temperature Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200minorLowLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.40
The value of this object provides the Minor Low alarm value of the Laser Temperature Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200currentValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.41
The value of this object provides the Current value of the Laser Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200stateFlagLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.42
The value of this object provides the state of the Laser Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200minValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.43
The value of this object provides the minimum value the Laser Temperature Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200maxValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.44
The value of this object provides the maximum value the Laser Temperature Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200alarmStateLaserTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.45
The value of this object provides the curent alarm state of the Laser Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm200labelLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.46
The value of this object provides the label of the Laser Bias Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200uomLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.47
The value of this object provides the Unit of Measure of the Laser Bias Current Analog parameter. The unit of measure for this parameter is mA
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200majorHighLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.48
The value of this object provides the Major High alarm value of the Laser Bias Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200majorLowLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.49
The value of this object provides the Major Low alarm value of the Laser Bias Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200minorHighLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.50
The value of this object provides the Minor High alarm value of the Laser Bias Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200minorLowLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.51
The value of this object provides the Minor Low alarm value of the Laser Bias Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200currentValueLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.52
The value of this object provides the Current value of the Laser Bias Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200stateFlagLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.53
The value of this object provides the state of the Laser Bias Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200minValueLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.54
The value of this object provides the minimum value the Laser Bias Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200maxValueLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.55
The value of this object provides the maximum value the Laser Bias Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200alarmStateLaserCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.56
The value of this object provides the curent alarm state of the Laser Bias Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm200labelTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.57
The value of this object provides the label of the TEC Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200uomTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.58
The value of this object provides the Unit of Measure of the TEC Current Analog parameter. The unit of measure for this parameter is mA
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200majorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.59
The value of this object provides the Major High alarm value of the TEC Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200majorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.60
The value of this object provides the Major Low alarm value of the TEC Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200minorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.61
The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200minorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.62
The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200currentValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.63
The value of this object provides the Current value of the TEC Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200stateFlagTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.64
The value of this object provides the state of the TEC Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200minValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.65
The value of this object provides the minimum value the TEC Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200maxValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.66
The value of this object provides the maximum value the TEC Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200alarmStateTecCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.67
The value of this object provides the curent alarm state of the TEC Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm200labelModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.68
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200uomModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.69
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. The unit of measure for this parameter is degrees C
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200majorHighModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.70
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200majorLowModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.71
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200minorHighModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.72
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200minorLowModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.73
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200currentValueModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.74
The value of this object provides the Current value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200stateFlagModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.75
The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200minValueModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.76
The value of this object provides the minimum value the Module Temperature Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200maxValueModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.77
The value of this object provides the maximum value the Module Temperature Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200alarmStateModTemp		1.3.6.1.4.1.1166.6.1.2.19.2.1.78
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm200labelFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.79
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200uomFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.80
The value of this object provides the Unit of Measure of the Fan Current Analog parameter. The unit of measure for this parameter is mA
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200majorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.81
The value of this object provides the Major High alarm value of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200majorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.82
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200minorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.83
The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200minorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.84
The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm200currentValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.85
The value of this object provides the Current value of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200stateFlagFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.86
The value of this object provides the state of the Fan Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200minValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.87
The value of this object provides the minimum value the Fan Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200maxValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.88
The value of this object provides the maximum value the Fan Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm200alarmStateFanCurrent		1.3.6.1.4.1.1166.6.1.2.19.2.1.89
The value of this object provides the curent alarm state of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gx2Dm200DigitalTableIndex		1.3.6.1.4.1.1166.6.1.2.19.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dm200labelRfInput		1.3.6.1.4.1.1166.6.1.2.19.3.2.2
The value of this object provides the label of the RF Input Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200enumRfInput		1.3.6.1.4.1.1166.6.1.2.19.3.2.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueRfInput		1.3.6.1.4.1.1166.6.1.2.19.3.2.4
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm200stateflagRfInput		1.3.6.1.4.1.1166.6.1.2.19.3.2.5
The value of this object provides the state of the RF Input Control Digital parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200labelOptOutput		1.3.6.1.4.1.1166.6.1.2.19.3.2.6
The value of this object provides the label of the Optical Output Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200enumOptOutput		1.3.6.1.4.1.1166.6.1.2.19.3.2.7
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueOptOutput		1.3.6.1.4.1.1166.6.1.2.19.3.2.8
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm200stateflagOptOutput		1.3.6.1.4.1.1166.6.1.2.19.3.2.9
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200labelSbsControl		1.3.6.1.4.1.1166.6.1.2.19.3.2.10
The value of this object provides the label of the SBS Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200enumSbsControl		1.3.6.1.4.1.1166.6.1.2.19.3.2.11
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueSbsControl		1.3.6.1.4.1.1166.6.1.2.19.3.2.12
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm200stateflagSbsControl		1.3.6.1.4.1.1166.6.1.2.19.3.2.13
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200labelFactoryDefault		1.3.6.1.4.1.1166.6.1.2.19.3.2.14
The value of this object provides the label of the Factory Default Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200enumFactoryDefault		1.3.6.1.4.1.1166.6.1.2.19.3.2.15
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueFactoryDefault		1.3.6.1.4.1.1166.6.1.2.19.3.2.16
The value of this object is the current value of the parameter. Return value is meaningless
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm200stateflagFactoryDefault		1.3.6.1.4.1.1166.6.1.2.19.3.2.17
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2Dm200StatusTableIndex		1.3.6.1.4.1.1166.6.1.2.19.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dm200labelBoot		1.3.6.1.4.1.1166.6.1.2.19.4.3.2
The value of this object provides the label of the Boot Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueBoot		1.3.6.1.4.1.1166.6.1.2.19.4.3.3
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm200stateflagBoot		1.3.6.1.4.1.1166.6.1.2.19.4.3.4
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200labelFlash		1.3.6.1.4.1.1166.6.1.2.19.4.3.5
The value of this object provides the label of the Flash Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueFlash		1.3.6.1.4.1.1166.6.1.2.19.4.3.6
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm200stateflagFlash		1.3.6.1.4.1.1166.6.1.2.19.4.3.7
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200labelFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.19.4.3.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.19.4.3.9
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm200stateflagFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.19.4.3.10
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200labelLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.19.4.3.11
The value of this object provides the label of the Laser Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.19.4.3.12
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm200stateflagLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.19.4.3.13
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200labelAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.19.4.3.14
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.19.4.3.15
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm200stateflagAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.19.4.3.16
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm200labelRFInputStatus		1.3.6.1.4.1.1166.6.1.2.19.4.3.17
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200valueRFInputStatus		1.3.6.1.4.1.1166.6.1.2.19.4.3.18
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm200stateflagRFInputStatus		1.3.6.1.4.1.1166.6.1.2.19.4.3.19
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2Dm200FactoryTableIndex		1.3.6.1.4.1.1166.6.1.2.19.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dm200bootControlByte		1.3.6.1.4.1.1166.6.1.2.19.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm200bootStatusByte		1.3.6.1.4.1.1166.6.1.2.19.5.4.3
This object indicates the status of the last boot. Bit 2 = Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail and Bit 0 = Bank 0 Fail (0 = Pass, 1 = Fail)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm200bank1CRC		1.3.6.1.4.1.1166.6.1.2.19.5.4.4
This object provides the CRC code of bank 0. The display formate for the data is Hex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm200bank2CRC		1.3.6.1.4.1.1166.6.1.2.19.5.4.5
This object provides the CRC code of bank 1.The display formate for the data is Hex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm200prgEEPROMByte		1.3.6.1.4.1.1166.6.1.2.19.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm200factoryCRC		1.3.6.1.4.1.1166.6.1.2.19.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm200calculateCRC		1.3.6.1.4.1.1166.6.1.2.19.5.4.8
This object indicates which of the Enums will have the CRC calculated.
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	factory(1), na(2), alarm(3)

dm200hourMeter		1.3.6.1.4.1.1166.6.1.2.19.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm200flashPrgCntA		1.3.6.1.4.1.1166.6.1.2.19.5.4.10
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm200flashPrgCntB		1.3.6.1.4.1.1166.6.1.2.19.5.4.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm200flashBankARev		1.3.6.1.4.1.1166.6.1.2.19.5.4.12
This object provides the revision of flash bank 0. The rev is 2 characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm200flashBankBRev		1.3.6.1.4.1.1166.6.1.2.19.5.4.13
This object provides the revision of flash bank 1. The rev is 2 characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

trapDM200ConfigChangeInteger		1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapDM200ConfigChangeDisplayString		2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapDM200fanCurrentAlarm		3
This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM200ModuleTempAlarm		4
This trap is issued when the Module Temperature parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM200omiOffsetAlarm		5
This trap is issued when the OMI Offset goes out of range.
TRAP-TYPE

trapDM200tecCurrentAlarm		6
This trap is issued when the TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM200LaserCurrentAlarm		7
This trap is issued when the Laser Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM200LaserTempAlarm		8
This trap is issued when the Laser Temp parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM200LaserPowerAlarm		9
This trap is issued when the Laser Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM200FlashAlarm		10
This trap is issued when the Laser Modules detects an error during Flash memory operations.
TRAP-TYPE

trapDM200BankBootAlarm		11
This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1.
TRAP-TYPE

trapDM200AlarmDataCRCAlarm		12
This trap is issued when the Alarm Data CRC is incorrect.
TRAP-TYPE

trapDM200FactoryDataCRCAlarm		13
This trap is issued when the Factory Data CRC is incorrect.
TRAP-TYPE

trapDM200CalDataCRCAlarm		14
This trap is issued when the Cal Data CRC is incorrect.
TRAP-TYPE

trapDM200ResetFacDefault		15
This trap is issued when the DM200 resets to factory defaults
TRAP-TYPE

trapDM200UserRFOffAlarm		16
This trap is issued when the the User RF is turned off.
TRAP-TYPE

trapDM200UserOpticalOffAlarm		17
This trap is issued when the User Optical Power is turned off.
TRAP-TYPE

trapDM200UserSBSOffAlarm		18
This trap is issued when the User SBS is turned off.
TRAP-TYPE

trapDM200RFInputAlarm		19
This trap is issued when the Laser Modules RF input parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM200RFOverloadAlarm		20
This trap is issued when the Laser Modules RF overload parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE