OMNI-gx2Dm1000-MIB

File: OMNI-gx2Dm1000-MIB.mib (91112 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215	NLS-BBNIDENT-MIB	GX2HFC-MIB
NLSBBN-TRAPS-MIB

Imported symbols

IpAddress	TimeTicks	Counter
OBJECT-TYPE	sysUpTime	DisplayString
TRAP-TYPE	gi	motproxies
gx2Dm1000	trapIdentifier	trapNetworkElemModelNumber
trapNetworkElemSerialNum	trapPerceivedSeverity	trapNetworkElemOperState
trapNetworkElemAlarmStatus	trapNetworkElemAdminState	trapNetworkElemAvailStatus
trapText	trapNETrapLastTrapTimeStamp	trapChangedObjectId
trapChangedValueInteger	trapChangedValueDisplayString

Defined Types

Float
Counter

Gx2Dm1000AnalogEntry
SEQUENCE
	gx2Dm1000AnalogTableIndex	INTEGER
	dm1000labelOffsetNomMonitor	DisplayString	Size(0..80)
	dm1000uomOffsetNomMonitor	DisplayString	Size(0..80)
	dm1000majorHighOffsetNomMonitor	Float
	dm1000majorLowOffsetNomMonitor	Float
	dm1000minorHighOffsetNomMonitor	Float
	dm1000minorLowOffsetNomMonitor	Float
	dm1000currentValueOffsetNomMonitor	Float
	dm1000stateFlagOffsetNomMonitor	INTEGER
	dm1000minValueOffsetNomMonitor	Float
	dm1000maxValueOffsetNomMonitor	Float
	dm1000alarmStateOffsetNomMonitor	INTEGER
	dm1000labelOffsetNomCnt	DisplayString	Size(0..80)
	dm1000uomOffsetNomCnt	DisplayString	Size(0..80)
	dm1000majorHighOffsetNomCnt	Float
	dm1000majorLowOffsetNomCnt	Float
	dm1000minorHighOffsetNomCnt	Float
	dm1000minorLowOffsetNomCnt	Float
	dm1000currentValueOffsetNomCnt	Float
	dm1000stateFlagOffsetNomCnt	INTEGER
	dm1000minValueOffsetNomCnt	Float
	dm1000maxValueOffsetNomCnt	Float
	dm1000alarmStateOffsetNomCnt	INTEGER
	dm1000labelAttenSetting	DisplayString	Size(0..80)
	dm1000uomAttenSetting	DisplayString	Size(0..80)
	dm1000majorHighAttenSetting	Float
	dm1000majorLowAttenSetting	Float
	dm1000minorHighAttenSetting	Float
	dm1000minorLowAttenSetting	Float
	dm1000currentValueAttenSetting	Float
	dm1000stateFlagAttenSetting	INTEGER
	dm1000minValueAttenSetting	Float
	dm1000maxValueAttenSetting	Float
	dm1000alarmStateAttenSetting	INTEGER
	dm1000labelLaserPower	DisplayString	Size(0..80)
	dm1000uomLaserPower	DisplayString	Size(0..80)
	dm1000majorHighLaserPower	Float
	dm1000majorLowLaserPower	Float
	dm1000minorHighLaserPower	Float
	dm1000minorLowLaserPower	Float
	dm1000currentValueLaserPower	Float
	dm1000stateFlagLaserPower	INTEGER
	dm1000minValueLaserPower	Float
	dm1000maxValueLaserPower	Float
	dm1000alarmStateLaserPower	INTEGER
	dm1000labelLaserTemp	DisplayString	Size(0..80)
	dm1000uomLaserTemp	DisplayString	Size(0..80)
	dm1000majorHighLaserTemp	Float
	dm1000majorLowLaserTemp	Float
	dm1000minorHighLaserTemp	Float
	dm1000minorLowLaserTemp	Float
	dm1000currentValueLaserTemp	Float
	dm1000stateFlagLaserTemp	INTEGER
	dm1000minValueLaserTemp	Float
	dm1000maxValueLaserTemp	Float
	dm1000alarmStateLaserTemp	INTEGER
	dm1000labelLaserCurrent	DisplayString	Size(0..80)
	dm1000uomLaserCurrent	DisplayString	Size(0..80)
	dm1000majorHighLaserCurrent	Float
	dm1000majorLowLaserCurrent	Float
	dm1000minorHighLaserCurrent	Float
	dm1000minorLowLaserCurrent	Float
	dm1000currentValueLaserCurrent	Float
	dm1000stateFlagLaserCurrent	INTEGER
	dm1000minValueLaserCurrent	Float
	dm1000maxValueLaserCurrent	Float
	dm1000alarmStateLaserCurrent	INTEGER
	dm1000labelTecCurrent	DisplayString	Size(0..80)
	dm1000uomTecCurrent	DisplayString	Size(0..80)
	dm1000majorHighTecCurrent	Float
	dm1000majorLowTecCurrent	Float
	dm1000minorHighTecCurrent	Float
	dm1000minorLowTecCurrent	Float
	dm1000currentValueTecCurrent	Float
	dm1000stateFlagTecCurrent	INTEGER
	dm1000minValueTecCurrent	Float
	dm1000maxValueTecCurrent	Float
	dm1000alarmStateTecCurrent	INTEGER
	dm1000labelModTemp	DisplayString	Size(0..80)
	dm1000uomModTemp	DisplayString	Size(0..80)
	dm1000majorHighModTemp	Float
	dm1000majorLowModTemp	Float
	dm1000minorHighModTemp	Float
	dm1000minorLowModTemp	Float
	dm1000currentValueModTemp	Float
	dm1000stateFlagModTemp	INTEGER
	dm1000minValueModTemp	Float
	dm1000maxValueModTemp	Float
	dm1000alarmStateModTemp	INTEGER
	dm1000labelFanCurrent	DisplayString	Size(0..80)
	dm1000uomFanCurrent	DisplayString	Size(0..80)
	dm1000majorHighFanCurrent	Float
	dm1000majorLowFanCurrent	Float
	dm1000minorHighFanCurrent	Float
	dm1000minorLowFanCurrent	Float
	dm1000currentValueFanCurrent	Float
	dm1000stateFlagFanCurrent	INTEGER
	dm1000minValueFanCurrent	Float
	dm1000maxValueFanCurrent	Float
	dm1000alarmStateFanCurrent	INTEGER

Gx2Dm1000DigitalEntry
SEQUENCE
	gx2Dm1000DigitalTableIndex	INTEGER
	dm1000labelRfInput	DisplayString	Size(0..80)
	dm1000enumRfInput	DisplayString	Size(0..80)
	dm1000valueRfInput	INTEGER
	dm1000stateflagRfInput	INTEGER
	dm1000labelOptOutput	DisplayString	Size(0..80)
	dm1000enumOptOutput	DisplayString	Size(0..80)
	dm1000valueOptOutput	INTEGER
	dm1000stateflagOptOutput	INTEGER
	dm1000labelSbsControl	DisplayString	Size(0..80)
	dm1000enumSbsControl	DisplayString	Size(0..80)
	dm1000valueSbsControl	INTEGER
	dm1000stateflagSbsControl	INTEGER
	dm1000labelLaserMode	DisplayString	Size(0..80)
	dm1000enumLaserMode	DisplayString	Size(0..80)
	dm1000valueLaserMode	INTEGER
	dm1000stateflagLaserMode	INTEGER
	dm1000labelFactoryDefault	DisplayString	Size(0..80)
	dm1000enumFactoryDefault	DisplayString	Size(0..80)
	dm1000valueFactoryDefault	INTEGER
	dm1000stateflagFactoryDefault	INTEGER

Gx2Dm1000StatusEntry
SEQUENCE
	gx2Dm1000StatusTableIndex	INTEGER
	dm1000labelBoot	DisplayString	Size(0..80)
	dm1000valueBoot	INTEGER
	dm1000stateflagBoot	INTEGER
	dm1000labelFlash	DisplayString	Size(0..80)
	dm1000valueFlash	INTEGER
	dm1000stateflagFlash	INTEGER
	dm1000labelFactoryDataCRC	DisplayString	Size(0..80)
	dm1000valueFactoryDataCRC	INTEGER
	dm1000stateflagFactoryDataCRC	INTEGER
	dm1000labelLaserDataCRC	DisplayString	Size(0..80)
	dm1000valueLaserDataCRC	INTEGER
	dm1000stateflagLaserDataCRC	INTEGER
	dm1000labelAlarmDataCrc	DisplayString	Size(0..80)
	dm1000valueAlarmDataCrc	INTEGER
	dm1000stateflagAlarmDataCrc	INTEGER
	dm1000labelRFInputStatus	DisplayString	Size(0..80)
	dm1000valueRFInputStatus	INTEGER
	dm1000stateflagRFInputStatus	INTEGER

Gx2Dm1000FactoryEntry
SEQUENCE
	gx2Dm1000FactoryTableIndex	INTEGER
	dm1000bootControlByte	INTEGER
	dm1000bootStatusByte	INTEGER
	dm1000bank1CRC	INTEGER
	dm1000bank2CRC	INTEGER
	dm1000prgEEPROMByte	INTEGER
	dm1000factoryCRC	INTEGER
	dm1000calculateCRC	INTEGER
	dm1000hourMeter	INTEGER
	dm1000flashPrgCntA	INTEGER
	dm1000flashPrgCntB	INTEGER
	dm1000flashBankARev	DisplayString	Size(0..80)
	dm1000flashBankBRev	DisplayString	Size(0..80)

Defined Values

gx2Dm1000Descriptor		1.3.6.1.4.1.1166.6.1.2.28.1
OBJECT IDENTIFIER

gx2Dm1000AnalogTable		1.3.6.1.4.1.1166.6.1.2.28.2
This table contains gx2Dm1000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Dm1000AnalogEntry

gx2Dm1000AnalogEntry		1.3.6.1.4.1.1166.6.1.2.28.2.1
This list contains the analog parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Dm1000AnalogEntry

gx2Dm1000DigitalTable		1.3.6.1.4.1.1166.6.1.2.28.3
This table contains gx2Dm1000m specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Dm1000DigitalEntry

gx2Dm1000DigitalEntry		1.3.6.1.4.1.1166.6.1.2.28.3.2
This list contains digital parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Dm1000DigitalEntry

gx2Dm1000StatusTable		1.3.6.1.4.1.1166.6.1.2.28.4
This table contains gx2Dm1000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Dm1000StatusEntry

gx2Dm1000StatusEntry		1.3.6.1.4.1.1166.6.1.2.28.4.3
This list contains Status parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Dm1000StatusEntry

gx2Dm1000FactoryTable		1.3.6.1.4.1.1166.6.1.2.28.5
This table contains gx2Dm1000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Dm1000FactoryEntry

gx2Dm1000FactoryEntry		1.3.6.1.4.1.1166.6.1.2.28.5.4
This list contains Factory parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Dm1000FactoryEntry

gx2Dm1000AnalogTableIndex		1.3.6.1.4.1.1166.6.1.2.28.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

dm1000labelOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.2
The value of this object provides the label of the Offset Monitor Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000uomOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.3
The value of this object provides the Unit of Measure of the Offset Monitor Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000majorHighOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.4
The value of this object provides the Major High alarm value of the Offset Monitor Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000majorLowOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.5
The value of this object provides the Major Low alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000minorHighOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.6
The value of this object provides the Minor High alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000minorLowOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.7
The value of this object provides the Minor Low alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000currentValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.8
The value of this object provides the Current value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000stateFlagOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.9
The value of this object provides the state of the Offset Monitor Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000minValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.10
The value of this object provides the minimum value the Offset Monitor Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000maxValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.11
The value of this object provides the maximum value the Offset Monitor Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000alarmStateOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.28.2.1.12
The value of this object provides the curent alarm state of the Offset Monitor Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm1000labelOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.13
The value of this object provides the label of the Offset Control Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000uomOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.14
The value of this object provides the Unit of Measure of the Offset Control Analog parameter..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000majorHighOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.15
The value of this object provides the Major High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000majorLowOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.16
The value of this object provides the Major Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000minorHighOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.17
The value of this object provides the Minor High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000minorLowOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.18
The value of this object provides the Minor Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000currentValueOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.19
The value of this object provides the Current value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

dm1000stateFlagOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.20
The value of this object provides the state of the Offset Control Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000minValueOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.21
The value of this object provides the minimum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000maxValueOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.22
The value of this object provides the maximum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000alarmStateOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.28.2.1.23
The value of this object provides the curent alarm state of the Offset Control Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm1000labelAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.24
The value of this object provides the label of the Attenuator Setting Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000uomAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.25
The value of this object provides the Unit of Measure of the Attenuator Setting Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000majorHighAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.26
The value of this object provides the Major High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000majorLowAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.27
The value of this object provides the Major Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000minorHighAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.28
The value of this object provides the Minor High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000minorLowAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.29
The value of this object provides the Minor Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000currentValueAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.30
The value of this object provides the Current value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

dm1000stateFlagAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.31
The value of this object provides the state of the Attenuator Setting Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000minValueAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.32
The value of this object provides the minimum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000maxValueAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.33
The value of this object provides the maximum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000alarmStateAttenSetting		1.3.6.1.4.1.1166.6.1.2.28.2.1.34
The value of this object provides the curent alarm state of the Attenuator Setting Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm1000labelLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.35
The value of this object provides the label of the Laser Optical Power Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000uomLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.36
The value of this object provides the Unit of Measure of the Laser Optical Power Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000majorHighLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.37
The value of this object provides the Major High alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000majorLowLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.38
The value of this object provides the Major Low alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000minorHighLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.39
The value of this object provides the Minor High alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000minorLowLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.40
The value of this object provides the Minor Low alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000currentValueLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.41
The value of this object provides the Current value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000stateFlagLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.42
The value of this object provides the state of the Laser Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000minValueLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.43
The value of this object provides the minimum value the Laser Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000maxValueLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.44
The value of this object provides the maximum value the Laser Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000alarmStateLaserPower		1.3.6.1.4.1.1166.6.1.2.28.2.1.45
The value of this object provides the curent alarm state of the Laser Optical Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm1000labelLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.46
The value of this object provides the label of the Laser Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000uomLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.47
The value of this object provides the Unit of Measure of the Laser Temperature Analog parameter..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000majorHighLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.48
The value of this object provides the Major High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000majorLowLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.49
The value of this object provides the Major Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000minorHighLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.50
The value of this object provides the Minor High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000minorLowLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.51
The value of this object provides the Minor Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000currentValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.52
The value of this object provides the Current value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000stateFlagLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.53
The value of this object provides the state of the Laser Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000minValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.54
The value of this object provides the minimum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000maxValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.55
The value of this object provides the maximum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000alarmStateLaserTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.56
The value of this object provides the curent alarm state of the Laser Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm1000labelLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.57
The value of this object provides the label of the Laser Bias Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000uomLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.58
The value of this object provides the Unit of Measure of the Laser Bias Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000majorHighLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.59
The value of this object provides the Major High alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000majorLowLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.60
The value of this object provides the Major Low alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000minorHighLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.61
The value of this object provides the Minor High alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000minorLowLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.62
The value of this object provides the Minor Low alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000currentValueLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.63
The value of this object provides the Current value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000stateFlagLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.64
The value of this object provides the state of the Laser Bias Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000minValueLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.65
The value of this object provides the minimum value the Laser Bias Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000maxValueLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.66
The value of this object provides the maximum value the Laser Bias Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000alarmStateLaserCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.67
The value of this object provides the curent alarm state of the Laser Bias Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm1000labelTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.68
The value of this object provides the label of the TEC Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000uomTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.69
The value of this object provides the Unit of Measure of the TEC Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000majorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.70
The value of this object provides the Major High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000majorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.71
The value of this object provides the Major Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000minorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.72
The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000minorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.73
The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000currentValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.74
The value of this object provides the Current value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000stateFlagTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.75
The value of this object provides the state of the TEC Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000minValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.76
The value of this object provides the minimum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000maxValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.77
The value of this object provides the maximum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000alarmStateTecCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.78
The value of this object provides the curent alarm state of the TEC Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm1000labelModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.79
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000uomModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.80
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000majorHighModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.81
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000majorLowModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.82
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000minorHighModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.83
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000minorLowModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.84
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000currentValueModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.85
The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000stateFlagModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.86
The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000minValueModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.87
The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000maxValueModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.88
The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000alarmStateModTemp		1.3.6.1.4.1.1166.6.1.2.28.2.1.89
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm1000labelFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.90
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000uomFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.91
The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000majorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.92
The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000majorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.93
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000minorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.94
The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000minorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.95
The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

dm1000currentValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.96
The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000stateFlagFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.97
The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000minValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.98
The value of this object provides the minimum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000maxValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.99
The value of this object provides the maximum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm1000alarmStateFanCurrent		1.3.6.1.4.1.1166.6.1.2.28.2.1.100
The value of this object provides the curent alarm state of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gx2Dm1000DigitalTableIndex		1.3.6.1.4.1.1166.6.1.2.28.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

dm1000labelRfInput		1.3.6.1.4.1.1166.6.1.2.28.3.2.2
The value of this object provides the label of the RF Input Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000enumRfInput		1.3.6.1.4.1.1166.6.1.2.28.3.2.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueRfInput		1.3.6.1.4.1.1166.6.1.2.28.3.2.4
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm1000stateflagRfInput		1.3.6.1.4.1.1166.6.1.2.28.3.2.5
The value of this object provides the state of the RF Input Control Digital parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000labelOptOutput		1.3.6.1.4.1.1166.6.1.2.28.3.2.6
The value of this object provides the label of the Optical Output Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000enumOptOutput		1.3.6.1.4.1.1166.6.1.2.28.3.2.7
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueOptOutput		1.3.6.1.4.1.1166.6.1.2.28.3.2.8
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm1000stateflagOptOutput		1.3.6.1.4.1.1166.6.1.2.28.3.2.9
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000labelSbsControl		1.3.6.1.4.1.1166.6.1.2.28.3.2.10
The value of this object provides the label of the SBS Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000enumSbsControl		1.3.6.1.4.1.1166.6.1.2.28.3.2.11
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueSbsControl		1.3.6.1.4.1.1166.6.1.2.28.3.2.12
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm1000stateflagSbsControl		1.3.6.1.4.1.1166.6.1.2.28.3.2.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000labelLaserMode		1.3.6.1.4.1.1166.6.1.2.28.3.2.14
The value of this object provides the label of the Laser Mode Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000enumLaserMode		1.3.6.1.4.1.1166.6.1.2.28.3.2.15
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueLaserMode		1.3.6.1.4.1.1166.6.1.2.28.3.2.16
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	preset(1), set(2), setEquate(3), manual(4), manualEquate(5)

dm1000stateflagLaserMode		1.3.6.1.4.1.1166.6.1.2.28.3.2.17
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000labelFactoryDefault		1.3.6.1.4.1.1166.6.1.2.28.3.2.18
The value of this object provides the label of the Factory Default Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000enumFactoryDefault		1.3.6.1.4.1.1166.6.1.2.28.3.2.19
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueFactoryDefault		1.3.6.1.4.1.1166.6.1.2.28.3.2.20
The value of this object is the current value of the parameter. Return value is meaningless
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm1000stateflagFactoryDefault		1.3.6.1.4.1.1166.6.1.2.28.3.2.21
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2Dm1000StatusTableIndex		1.3.6.1.4.1.1166.6.1.2.28.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

dm1000labelBoot		1.3.6.1.4.1.1166.6.1.2.28.4.3.2
The value of this object provides the label of the Boot Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueBoot		1.3.6.1.4.1.1166.6.1.2.28.4.3.3
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm1000stateflagBoot		1.3.6.1.4.1.1166.6.1.2.28.4.3.4
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000labelFlash		1.3.6.1.4.1.1166.6.1.2.28.4.3.5
The value of this object provides the label of the Flash Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueFlash		1.3.6.1.4.1.1166.6.1.2.28.4.3.6
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm1000stateflagFlash		1.3.6.1.4.1.1166.6.1.2.28.4.3.7
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000labelFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.28.4.3.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.28.4.3.9
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm1000stateflagFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.28.4.3.10
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000labelLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.28.4.3.11
The value of this object provides the label of the Laser Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.28.4.3.12
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm1000stateflagLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.28.4.3.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000labelAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.28.4.3.14
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.28.4.3.15
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm1000stateflagAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.28.4.3.16
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm1000labelRFInputStatus		1.3.6.1.4.1.1166.6.1.2.28.4.3.17
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000valueRFInputStatus		1.3.6.1.4.1.1166.6.1.2.28.4.3.18
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm1000stateflagRFInputStatus		1.3.6.1.4.1.1166.6.1.2.28.4.3.19
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2Dm1000FactoryTableIndex		1.3.6.1.4.1.1166.6.1.2.28.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

dm1000bootControlByte		1.3.6.1.4.1.1166.6.1.2.28.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm1000bootStatusByte		1.3.6.1.4.1.1166.6.1.2.28.5.4.3
This object indicates the status of the last boot. Bit 2 = Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail and Bit 0 = Bank 0 Fail (0 = Pass, 1 = Fail)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm1000bank1CRC		1.3.6.1.4.1.1166.6.1.2.28.5.4.4
This object provides the CRC code of bank 0. The display formate for the data is Hex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm1000bank2CRC		1.3.6.1.4.1.1166.6.1.2.28.5.4.5
This object provides the CRC code of bank 1.The display formate for the data is Hex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm1000prgEEPROMByte		1.3.6.1.4.1.1166.6.1.2.28.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm1000factoryCRC		1.3.6.1.4.1.1166.6.1.2.28.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm1000calculateCRC		1.3.6.1.4.1.1166.6.1.2.28.5.4.8
This object indicates which of the Enums will have the CRC calculated.
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	factory(1), na(2), alarm(3)

dm1000hourMeter		1.3.6.1.4.1.1166.6.1.2.28.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm1000flashPrgCntA		1.3.6.1.4.1.1166.6.1.2.28.5.4.10
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm1000flashPrgCntB		1.3.6.1.4.1.1166.6.1.2.28.5.4.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm1000flashBankARev		1.3.6.1.4.1.1166.6.1.2.28.5.4.12
This object provides the revision of flash bank 0. The rev is 2 characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm1000flashBankBRev		1.3.6.1.4.1.1166.6.1.2.28.5.4.13
This object provides the revision of flash bank 1. The rev is 2 characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

trapDM1000ConfigChangeInteger		1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapDM1000ConfigChangeDisplayString		2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapDM1000fanCurrentAlarm		3
This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM1000ModuleTempAlarm		4
This trap is issued when the Module Temperature parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM1000omiOffsetAlarm		5
This trap is issued when the OMI Offset goes out of range.
TRAP-TYPE

trapDM1000tecCurrentAlarm		6
This trap is issued when the TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM1000LaserCurrentAlarm		7
This trap is issued when the Laser Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM1000LaserTempAlarm		8
This trap is issued when the Laser Temp parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM1000LaserPowerAlarm		9
This trap is issued when the Laser Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM1000FlashAlarm		10
This trap is issued when the Laser Modules detects an error during Flash memory operations.
TRAP-TYPE

trapDM1000BankBootAlarm		11
This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1.
TRAP-TYPE

trapDM1000AlarmDataCRCAlarm		12
This trap is issued when the Alarm Data CRC is incorrect.
TRAP-TYPE

trapDM1000FactoryDataCRCAlarm		13
This trap is issued when the Factory Data CRC is incorrect.
TRAP-TYPE

trapDM1000CalDataCRCAlarm		14
This trap is issued when the Cal Data CRC is incorrect.
TRAP-TYPE

trapDM1000ResetFacDefault		15
This trap is issued when the DM1000 resets to factory defaults
TRAP-TYPE

trapDM1000UserRFOffAlarm		16
This trap is issued when the the User RF is turned off.
TRAP-TYPE

trapDM1000UserOpticalOffAlarm		17
This trap is issued when the User Optical Power is turned off.
TRAP-TYPE

trapDM1000UserSBSOffAlarm		18
This trap is issued when the User SBS is turned off.
TRAP-TYPE

trapDM1000RFInputAlarm		19
This trap is issued when the Laser Modules RF input parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM1000RFOverloadAlarm		20
This trap is issued when the Laser Modules RF overload parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE