OMNI-gx2DM2000-MIB

File: OMNI-gx2DM2000-MIB.mib (106326 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215	NLS-BBNIDENT-MIB	GX2HFC-MIB
NLSBBN-TRAPS-MIB

Imported symbols

IpAddress	TimeTicks	Counter
OBJECT-TYPE	sysUpTime	DisplayString
TRAP-TYPE	gi	motproxies
gx2Dm2000	trapIdentifier	trapNetworkElemModelNumber
trapNetworkElemSerialNum	trapPerceivedSeverity	trapNetworkElemOperState
trapNetworkElemAlarmStatus	trapNetworkElemAdminState	trapNetworkElemAvailStatus
trapText	trapNETrapLastTrapTimeStamp	trapChangedObjectId
trapChangedValueInteger	trapChangedValueDisplayString

Defined Types

Float
Counter

Gx2dm2000AnalogEntry
SEQUENCE
	gx2dm2000AnalogTableIndex	INTEGER
	dm2000labelOffsetNomMonitor	DisplayString	Size(0..80)
	dm2000uomOffsetNomMonitor	DisplayString	Size(0..80)
	dm2000majorHighOffsetNomMonitor	Float
	dm2000majorLowOffsetNomMonitor	Float
	dm2000minorHighOffsetNomMonitor	Float
	dm2000minorLowOffsetNomMonitor	Float
	dm2000currentValueOffsetNomMonitor	Float
	dm2000stateFlagOffsetNomMonitor	INTEGER
	dm2000minValueOffsetNomMonitor	Float
	dm2000maxValueOffsetNomMonitor	Float
	dm2000alarmStateOffsetNomMonitor	INTEGER
	dm2000labelOffsetNomCnt	DisplayString	Size(0..80)
	dm2000uomOffsetNomCnt	DisplayString	Size(0..80)
	dm2000majorHighOffsetNomCnt	Float
	dm2000majorLowOffsetNomCnt	Float
	dm2000minorHighOffsetNomCnt	Float
	dm2000minorLowOffsetNomCnt	Float
	dm2000currentValueOffsetNomCnt	Float
	dm2000stateFlagOffsetNomCnt	INTEGER
	dm2000minValueOffsetNomCnt	Float
	dm2000maxValueOffsetNomCnt	Float
	dm2000alarmStateOffsetNomCnt	INTEGER
	dm2000labelRelAttenSetting	DisplayString	Size(0..80)
	dm2000uomRelAttenSetting	DisplayString	Size(0..80)
	dm2000majorHighRelAttenSetting	Float
	dm2000majorLowRelAttenSetting	Float
	dm2000minorHighRelAttenSetting	Float
	dm2000minorLowRelAttenSetting	Float
	dm2000currentValueRelAttenSetting	Float
	dm2000stateFlagRelAttenSetting	INTEGER
	dm2000minValueRelAttenSetting	Float
	dm2000maxValueRelAttenSetting	Float
	dm2000alarmStateRelAttenSetting	INTEGER
	dm2000labelOptPower	DisplayString	Size(0..80)
	dm2000uomOptPower	DisplayString	Size(0..80)
	dm2000majorHighOptPower	Float
	dm2000majorLowOptPower	Float
	dm2000minorHighOptPower	Float
	dm2000minorLowOptPower	Float
	dm2000currentValueOptPower	Float
	dm2000stateFlagOptPower	INTEGER
	dm2000minValueOptPower	Float
	dm2000maxValueOptPower	Float
	dm2000alarmStateOptPower	INTEGER
	dm2000labelLaserBias	DisplayString	Size(0..80)
	dm2000uomLaserBias	DisplayString	Size(0..80)
	dm2000majorHighLaserBias	Float
	dm2000majorLowLaserBias	Float
	dm2000minorHighLaserBias	Float
	dm2000minorLowLaserBias	Float
	dm2000currentValueLaserBias	Float
	dm2000stateFlagLaserBias	INTEGER
	dm2000minValueLaserBias	Float
	dm2000maxValueLaserBias	Float
	dm2000alarmStateLaserBias	INTEGER
	dm2000labelTecCurrent	DisplayString	Size(0..80)
	dm2000uomTecCurrent	DisplayString	Size(0..80)
	dm2000majorHighTecCurrent	Float
	dm2000majorLowTecCurrent	Float
	dm2000minorHighTecCurrent	Float
	dm2000minorLowTecCurrent	Float
	dm2000currentValueTecCurrent	Float
	dm2000stateFlagTecCurrent	INTEGER
	dm2000minValueTecCurrent	Float
	dm2000maxValueTecCurrent	Float
	dm2000alarmStateTecCurrent	INTEGER
	dm2000labelLaserTemp	DisplayString	Size(0..80)
	dm2000uomLaserTemp	DisplayString	Size(0..80)
	dm2000majorHighLaserTemp	Float
	dm2000majorLowLaserTemp	Float
	dm2000minorHighLaserTemp	Float
	dm2000minorLowLaserTemp	Float
	dm2000currentValueLaserTemp	Float
	dm2000stateFlagLaserTemp	INTEGER
	dm2000minValueLaserTemp	Float
	dm2000maxValueLaserTemp	Float
	dm2000alarmStateLaserTemp	INTEGER
	dm2000labelModuleTemp	DisplayString	Size(0..80)
	dm2000uomModuleTemp	DisplayString	Size(0..80)
	dm2000majorHighModuleTemp	Float
	dm2000majorLowModuleTemp	Float
	dm2000minorHighModuleTemp	Float
	dm2000minorLowModuleTemp	Float
	dm2000currentValueModuleTemp	Float
	dm2000stateFlagModuleTemp	INTEGER
	dm2000minValueModuleTemp	Float
	dm2000maxValueModuleTemp	Float
	dm2000alarmStateModuleTemp	INTEGER
	dm2000labelFanCurrent	DisplayString	Size(0..80)
	dm2000uomFanCurrent	DisplayString	Size(0..80)
	dm2000majorHighFanCurrent	Float
	dm2000majorLowFanCurrent	Float
	dm2000minorHighFanCurrent	Float
	dm2000minorLowFanCurrent	Float
	dm2000currentValueFanCurrent	Float
	dm2000stateFlagFanCurrent	INTEGER
	dm2000minValueFanCurrent	Float
	dm2000maxValueFanCurrent	Float
	dm2000alarmStateFanCurrent	INTEGER
	dm2000label12Volt	DisplayString	Size(0..80)
	dm2000uom12Volt	DisplayString	Size(0..80)
	dm2000majorHigh12Volt	Float
	dm2000majorLow12Volt	Float
	dm2000minorHigh12Volt	Float
	dm2000minorLow12Volt	Float
	dm2000currentValue12Volt	Float
	dm2000stateFlag12Volt	INTEGER
	dm2000minValue12Volt	Float
	dm2000maxValue12Volt	Float
	dm2000alarmState12Volt	INTEGER

Gx2dm2000DigitalEntry
SEQUENCE
	gx2dm2000DigitalTableIndex	INTEGER
	dm2000labelRfInput	DisplayString	Size(0..80)
	dm2000enumRfInput	DisplayString	Size(0..80)
	dm2000valueRfInput	INTEGER
	dm2000stateflagRfInput	INTEGER
	dm2000labelOptOutput	DisplayString	Size(0..80)
	dm2000enumOptOutput	DisplayString	Size(0..80)
	dm2000valueOptOutput	INTEGER
	dm2000stateflagOptOutput	INTEGER
	dm2000labelLaserMode	DisplayString	Size(0..80)
	dm2000enumLaserMode	DisplayString	Size(0..80)
	dm2000valueLaserMode	INTEGER
	dm2000stateflagLaserMode	INTEGER
	dm2000labelLaserSecMode	DisplayString	Size(0..80)
	dm2000enumLaserSecMode	DisplayString	Size(0..80)
	dm2000valueLaserSecMode	INTEGER
	dm2000stateflagLaserSecMode	INTEGER
	dm2000labelVideoOffset	DisplayString	Size(0..80)
	dm2000enumVideoOffset	DisplayString	Size(0..80)
	dm2000valueVideoOffset	INTEGER
	dm2000stateflagVideoOffset	INTEGER
	dm2000labelFactoryDefault	DisplayString	Size(0..80)
	dm2000enumFactoryDefault	DisplayString	Size(0..80)
	dm2000valueFactoryDefault	INTEGER
	dm2000stateflagFactoryDefault	INTEGER
	dm2000labelFiberLength	DisplayString	Size(0..80)
	dm2000enumFiberLength	DisplayString	Size(0..80)
	dm2000valueFiberLength	INTEGER
	dm2000stateflagFiberLength	INTEGER
	dm2000labelWavelengthOffset	DisplayString	Size(0..80)
	dm2000enumWavelengthOffset	DisplayString	Size(0..80)
	dm2000valueWavelengthOffset	INTEGER
	dm2000stateflagWavelengthOffset	INTEGER

Gx2dm2000StatusEntry
SEQUENCE
	gx2dm2000StatusTableIndex	INTEGER
	dm2000labelBoot	DisplayString	Size(0..80)
	dm2000valueBoot	INTEGER
	dm2000stateflagBoot	INTEGER
	dm2000labelFlash	DisplayString	Size(0..80)
	dm2000valueFlash	INTEGER
	dm2000stateflagFlash	INTEGER
	dm2000labelFactoryDataCRC	DisplayString	Size(0..80)
	dm2000valueFactoryDataCRC	INTEGER
	dm2000stateflagFactoryDataCRC	INTEGER
	dm2000labelLaserDataCRC	DisplayString	Size(0..80)
	dm2000valueLaserDataCRC	INTEGER
	dm2000stateflagLaserDataCRC	INTEGER
	dm2000labelAlarmDataCrc	DisplayString	Size(0..80)
	dm2000valueAlarmDataCrc	INTEGER
	dm2000stateflagAlarmDataCrc	INTEGER
	dm2000labelHWStatus	DisplayString	Size(0..80)
	dm2000valueHWStatus	INTEGER
	dm2000stateflagHWStatus	INTEGER
	dm2000labelRFInputStatus	DisplayString	Size(0..80)
	dm2000valueRFInputStatus	INTEGER
	dm2000stateflagRFInputStatus	INTEGER

Gx2dm2000FactoryEntry
SEQUENCE
	gx2dm2000FactoryTableIndex	INTEGER
	dm2000bootControlByteValue	INTEGER
	dm2000bootStatusByteValue	INTEGER
	dm2000bank1CRCValue	INTEGER
	dm2000bank2CRCValue	INTEGER
	dm2000prgEEPROMByteValue	INTEGER
	dm2000factoryCRCValue	INTEGER
	dm2000calculateCRCValue	INTEGER
	dm2000hourMeterValue	INTEGER
	dm2000flashPrgCntAValue	INTEGER
	dm2000flashPrgCntBValue	INTEGER
	dm2000flashBankARevValue	DisplayString	Size(0..80)
	dm2000flashBankBRevValue	DisplayString	Size(0..80)

Gx2Dm2000HoldTimeEntry
SEQUENCE
	gx2Dm2000HoldTimeTableIndex	INTEGER
	gx2Dm2000HoldTimeSpecIndex	INTEGER
	gx2Dm2000HoldTimeData	INTEGER

Defined Values

gx2dm2000Descriptor		1.3.6.1.4.1.1166.6.1.2.34.1
OBJECT IDENTIFIER

gx2dm2000AnalogTable		1.3.6.1.4.1.1166.6.1.2.34.2
This table contains gx2Dm2000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2dm2000AnalogEntry

gx2dm2000AnalogEntry		1.3.6.1.4.1.1166.6.1.2.34.2.1
This list contains the analog parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2dm2000AnalogEntry

gx2dm2000DigitalTable		1.3.6.1.4.1.1166.6.1.2.34.3
This table contains gx2Dm2000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2dm2000DigitalEntry

gx2dm2000DigitalEntry		1.3.6.1.4.1.1166.6.1.2.34.3.2
This list contains digital parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2dm2000DigitalEntry

gx2dm2000StatusTable		1.3.6.1.4.1.1166.6.1.2.34.4
This table contains gx2Dm2000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2dm2000StatusEntry

gx2dm2000StatusEntry		1.3.6.1.4.1.1166.6.1.2.34.4.3
This list contains Status parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2dm2000StatusEntry

gx2dm2000FactoryTable		1.3.6.1.4.1.1166.6.1.2.34.5
This table contains gx2Dm2000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2dm2000FactoryEntry

gx2dm2000FactoryEntry		1.3.6.1.4.1.1166.6.1.2.34.5.4
This list contains Factory parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2dm2000FactoryEntry

gx2Dm2000HoldTimeTable		1.3.6.1.4.1.1166.6.1.2.34.6
This table contains gx2Dm2000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Dm2000HoldTimeEntry

gx2Dm2000HoldTimeEntry		1.3.6.1.4.1.1166.6.1.2.34.6.5
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Dm2000HoldTimeEntry

gx2dm2000AnalogTableIndex		1.3.6.1.4.1.1166.6.1.2.34.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

dm2000labelOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.2
The value of this object provides the label of the Offset Monitor Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uomOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.3
The value of this object provides the Unit of Measure of the Offset Monitor Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHighOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.4
The value of this object provides the Major High alarm value of the Offset Monitor Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLowOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.5
The value of this object provides the Major Low alarm value of the Offset Monitor Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHighOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.6
The value of this object provides the Minor High alarm value of the Offset Monitor Analog parameter. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLowOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.7
The value of this object provides the Minor Low alarm value of the Offset Monitor Analog parameter. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.8
The value of this object provides the Current value of the Offset Monitor Analog parameter. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000stateFlagOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.9
The value of this object provides the state of the Offset Monitor Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.10
The value of this object provides the minimum value the Offset Monitor Analog parameter can achive. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.11
The value of this object provides the maximum value the Offset Monitor Analog parameter can achive. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmStateOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.34.2.1.12
The value of this object provides the curent alarm state of the Offset Monitor Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm2000labelOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.13
The value of this object provides the label of the Offset Control Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uomOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.14
The value of this object provides the label of the Offset Control Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHighOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.15
The value of this object provides the Major High alarm value of the Offset Control Analog parameter. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLowOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.16
The value of this object provides the Major Low alarm value of the Offset Control Analog parameter. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHighOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.17
The value of this object provides the Minor High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLowOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.18
The value of this object provides the Minor Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValueOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.19
The value of this object provides the Current value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

dm2000stateFlagOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.20
The value of this object provides the state of the Offset Control Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValueOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.21
The value of this object provides the minimum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValueOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.22
The value of this object provides the maximum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmStateOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.34.2.1.23
The value of this object provides the curent alarm state of the Offset Control Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm2000labelRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.24
The value of this object provides the label of the Attenuator Setting Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uomRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.25
The value of this object provides the Unit of Measure of the Attenuator Setting Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHighRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.26
The value of this object provides the Major High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLowRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.27
The value of this object provides the Major Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHighRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.28
The value of this object provides the Minor High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLowRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.29
The value of this object provides the Minor Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValueRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.30
The value of this object provides the Current value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

dm2000stateFlagRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.31
The value of this object provides the state of the Attenuator Setting Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValueRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.32
The value of this object provides the minimum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValueRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.33
The value of this object provides the maximum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmStateRelAttenSetting		1.3.6.1.4.1.1166.6.1.2.34.2.1.34
The value of this object provides the curent alarm state of the Attenuator Setting Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm2000labelOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.35
The value of this object provides the label of the Optical Power Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uomOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.36
The value of this object provides the Unit of Measure of the Optical Power Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHighOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.37
The value of this object provides the Major High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLowOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.38
The value of this object provides the Major Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHighOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.39
The value of this object provides the Minor High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLowOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.40
The value of this object provides the Minor Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValueOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.41
The value of this object provides the Current value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000stateFlagOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.42
The value of this object provides the state of the Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValueOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.43
The value of this object provides the minimum value the Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValueOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.44
The value of this object provides the maximum value the Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmStateOptPower		1.3.6.1.4.1.1166.6.1.2.34.2.1.45
The value of this object provides the curent alarm state of the Optical Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm2000labelLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.46
The value of this object provides the label of the Laser Bias Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uomLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.47
The value of this object provides the Unit of Measure of the Laser Bias Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHighLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.48
The value of this object provides the Major High alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLowLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.49
The value of this object provides the Major Low alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHighLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.50
The value of this object provides the Minor High alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLowLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.51
The value of this object provides the Minor Low alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValueLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.52
The value of this object provides the Current value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000stateFlagLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.53
The value of this object provides the state of the Laser Bias Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValueLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.54
The value of this object provides the minimum value the Laser Bias Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValueLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.55
The value of this object provides the maximum value the Laser Bias Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmStateLaserBias		1.3.6.1.4.1.1166.6.1.2.34.2.1.56
The value of this object provides the curent alarm state of the Laser Bias Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm2000labelTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.57
The value of this object provides the label of the TEC Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uomTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.58
The value of this object provides the Unit of Measure of the TEC Current Analog parameter..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.59
The value of this object provides the Major High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.60
The value of this object provides the Major Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.61
The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.62
The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.63
The value of this object provides the Current value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000stateFlagTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.64
The value of this object provides the state of the TEC Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.65
The value of this object provides the minimum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.66
The value of this object provides the maximum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmStateTecCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.67
The value of this object provides the curent alarm state of the TEC Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm2000labelLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.68
The value of this object provides the label of the Laser Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uomLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.69
The value of this object provides the Unit of Measure of the Laser Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHighLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.70
The value of this object provides the Major High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLowLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.71
The value of this object provides the Major Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHighLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.72
The value of this object provides the Minor High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLowLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.73
The value of this object provides the Minor Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.74
The value of this object provides the Current value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000stateFlagLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.75
The value of this object provides the state of the Laser Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.76
The value of this object provides the minimum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.77
The value of this object provides the maximum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmStateLaserTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.78
The value of this object provides the curent alarm state of the Laser Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm2000labelModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.79
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uomModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.80
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHighModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.81
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLowModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.82
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHighModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.83
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLowModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.84
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValueModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.85
The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000stateFlagModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.86
The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValueModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.87
The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValueModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.88
The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmStateModuleTemp		1.3.6.1.4.1.1166.6.1.2.34.2.1.89
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm2000labelFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.90
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uomFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.91
The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.92
The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.93
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.94
The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.95
The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.96
The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000stateFlagFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.97
The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.98
The value of this object provides the minimum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.99
The value of this object provides the maximum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmStateFanCurrent		1.3.6.1.4.1.1166.6.1.2.34.2.1.100
The value of this object provides the curent alarm state of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

dm2000label12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.101
The value of this object provides the label of the 12v Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000uom12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.102
The value of this object provides the Unit of Measure of the 12v Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000majorHigh12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.103
The value of this object provides the Major High alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000majorLow12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.104
The value of this object provides the Major Low alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorHigh12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.105
The value of this object provides the Minor High alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000minorLow12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.106
The value of this object provides the Minor Low alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000currentValue12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.107
The value of this object provides the Current value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000stateFlag12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.108
The value of this object provides the state of the 12v Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000minValue12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.109
The value of this object provides the minimum value the 12v Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000maxValue12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.110
The value of this object provides the maximum value the 12v Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

dm2000alarmState12Volt		1.3.6.1.4.1.1166.6.1.2.34.2.1.111
The value of this object provides the curent alarm state of the 12v Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gx2dm2000DigitalTableIndex		1.3.6.1.4.1.1166.6.1.2.34.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

dm2000labelRfInput		1.3.6.1.4.1.1166.6.1.2.34.3.2.2
The value of this object provides the label of the RF Input Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000enumRfInput		1.3.6.1.4.1.1166.6.1.2.34.3.2.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueRfInput		1.3.6.1.4.1.1166.6.1.2.34.3.2.4
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm2000stateflagRfInput		1.3.6.1.4.1.1166.6.1.2.34.3.2.5
The value of this object provides the state of the RF Input Control Digital parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelOptOutput		1.3.6.1.4.1.1166.6.1.2.34.3.2.6
The value of this object provides the label of the Optical Output Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000enumOptOutput		1.3.6.1.4.1.1166.6.1.2.34.3.2.7
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueOptOutput		1.3.6.1.4.1.1166.6.1.2.34.3.2.8
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm2000stateflagOptOutput		1.3.6.1.4.1.1166.6.1.2.34.3.2.9
The value of this object provides the dm2000state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelLaserMode		1.3.6.1.4.1.1166.6.1.2.34.3.2.10
The value of this object provides the label of the Laser Mode Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000enumLaserMode		1.3.6.1.4.1.1166.6.1.2.34.3.2.11
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueLaserMode		1.3.6.1.4.1.1166.6.1.2.34.3.2.12
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	preset(1), set(2), setEquate(3), manual(4), manualEquate(5)

dm2000stateflagLaserMode		1.3.6.1.4.1.1166.6.1.2.34.3.2.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelLaserSecMode		1.3.6.1.4.1.1166.6.1.2.34.3.2.14
The value of this object provides the label of the Laser Secondary Mode Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000enumLaserSecMode		1.3.6.1.4.1.1166.6.1.2.34.3.2.15
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueLaserSecMode		1.3.6.1.4.1.1166.6.1.2.34.3.2.16
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	cw(1), video(2)

dm2000stateflagLaserSecMode		1.3.6.1.4.1.1166.6.1.2.34.3.2.17
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelVideoOffset		1.3.6.1.4.1.1166.6.1.2.34.3.2.18
The value of this object provides the label of the Video Offset Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000enumVideoOffset		1.3.6.1.4.1.1166.6.1.2.34.3.2.19
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueVideoOffset		1.3.6.1.4.1.1166.6.1.2.34.3.2.20
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	minus2dB(1), minus3dB(2), minus4dB(3), minus5dB(4)

dm2000stateflagVideoOffset		1.3.6.1.4.1.1166.6.1.2.34.3.2.21
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelFactoryDefault		1.3.6.1.4.1.1166.6.1.2.34.3.2.22
The value of this object provides the label of the Factory Default Reset Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000enumFactoryDefault		1.3.6.1.4.1.1166.6.1.2.34.3.2.23
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueFactoryDefault		1.3.6.1.4.1.1166.6.1.2.34.3.2.24
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dm2000stateflagFactoryDefault		1.3.6.1.4.1.1166.6.1.2.34.3.2.25
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelFiberLength		1.3.6.1.4.1.1166.6.1.2.34.3.2.26
The value of this object provides the label for the Fiber Length Digital parameter .
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000enumFiberLength		1.3.6.1.4.1.1166.6.1.2.34.3.2.27
The value of this object represents the Enumeration values possible for the Digital parameter. The range for fiber length selection is from 0 to 60km, where 0km is represented with a 1, and 60 with a 61.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueFiberLength		1.3.6.1.4.1.1166.6.1.2.34.3.2.28
The value of this object is the current value of the parameter. It is used to set fiber length. The value range for this object is: 1 to 61. Where 1 = 0Km and 61 = 60Km
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dm2000stateflagFiberLength		1.3.6.1.4.1.1166.6.1.2.34.3.2.29
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelWavelengthOffset		1.3.6.1.4.1.1166.6.1.2.34.3.2.30
The value of this object provides the label for the Wavelength Offset Digital parameter .
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000enumWavelengthOffset		1.3.6.1.4.1.1166.6.1.2.34.3.2.31
The value of this object represents the Enumeration values possible for this Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueWavelengthOffset		1.3.6.1.4.1.1166.6.1.2.34.3.2.32
The value of this object is the current value of the parameter. It is used to select a Narrowcast or Full Spectrum application.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	narrowcast(1), fullSpectrum(2)

dm2000stateflagWavelengthOffset		1.3.6.1.4.1.1166.6.1.2.34.3.2.33
The value of this object provides the state of the the Wavelength Offset parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2dm2000StatusTableIndex		1.3.6.1.4.1.1166.6.1.2.34.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

dm2000labelBoot		1.3.6.1.4.1.1166.6.1.2.34.4.3.2
The value of this object provides the label of the Boot Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueBoot		1.3.6.1.4.1.1166.6.1.2.34.4.3.3
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm2000stateflagBoot		1.3.6.1.4.1.1166.6.1.2.34.4.3.4
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelFlash		1.3.6.1.4.1.1166.6.1.2.34.4.3.5
The value of this object provides the label of the Flash Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueFlash		1.3.6.1.4.1.1166.6.1.2.34.4.3.6
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm2000stateflagFlash		1.3.6.1.4.1.1166.6.1.2.34.4.3.7
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.34.4.3.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.34.4.3.9
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm2000stateflagFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.34.4.3.10
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.34.4.3.11
The value of this object provides the label of the Laser Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.34.4.3.12
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm2000stateflagLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.34.4.3.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.34.4.3.14
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.34.4.3.15
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm2000stateflagAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.34.4.3.16
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelHWStatus		1.3.6.1.4.1.1166.6.1.2.34.4.3.17
The value of this object provides the label of the Laser Drive Level Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueHWStatus		1.3.6.1.4.1.1166.6.1.2.34.4.3.18
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm2000stateflagHWStatus		1.3.6.1.4.1.1166.6.1.2.34.4.3.19
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

dm2000labelRFInputStatus		1.3.6.1.4.1.1166.6.1.2.34.4.3.20
The value of this object provides the label of the RF Input Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000valueRFInputStatus		1.3.6.1.4.1.1166.6.1.2.34.4.3.21
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

dm2000stateflagRFInputStatus		1.3.6.1.4.1.1166.6.1.2.34.4.3.22
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2dm2000FactoryTableIndex		1.3.6.1.4.1.1166.6.1.2.34.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

dm2000bootControlByteValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm2000bootStatusByteValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.3
This object indicates the status of the last boot
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm2000bank1CRCValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.4
This object provides the CRC code of bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm2000bank2CRCValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.5
This object provides the CRC code of bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm2000prgEEPROMByteValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm2000factoryCRCValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm2000calculateCRCValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.8
This object indicates which of the Emnums will have the CRC calculated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	factory(1), laserData(2), alarm(3)

dm2000hourMeterValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm2000flashPrgCntAValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.10
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm2000flashPrgCntBValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dm2000flashBankARevValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.12
This object provides the revision of flash bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

dm2000flashBankBRevValue		1.3.6.1.4.1.1166.6.1.2.34.5.4.13
This object provides the revision of flash bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gx2Dm2000HoldTimeTableIndex		1.3.6.1.4.1.1166.6.1.2.34.6.5.1
The value of this object is the index of the data object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

gx2Dm2000HoldTimeSpecIndex		1.3.6.1.4.1.1166.6.1.2.34.6.5.2
The value of this object identifies the index of the alarm object to be modified.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

gx2Dm2000HoldTimeData		1.3.6.1.4.1.1166.6.1.2.34.6.5.3
The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

trapDM2000ConfigChangeInteger		1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapDM2000ConfigChangeDisplayString		2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapDM2000RFInputAlarm		3
This trap is issued when the Laser Modules RF input parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM2000RFOverloadAlarm		4
This trap is issued when the Laser Modules RF overload parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM2000RFOffsetAlarm		5
This trap is issued when the Laser Modules RF Offset parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM2000OpticalPowerAlarm		6
This trap is issued when the Laser Modules Optical Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM2000LaserBiasAlarm		7
This trap is issued when the Laser Bias parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM2000LaserTempAlarm		8
This trap is issued when the Laser Temperature parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM2000TECCurrentAlarm		9
This trap is issued when the Laser Modules TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM2000FanCurrentAlarm		10
This trap is issued when the Laser Modules Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM200012vAlarm		11
This trap is issued when the Laser Modules 12 Volt parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapDM2000ModuleTempAlarm		12
This trap is issued when the Laser Module Temperature goes out of range.
TRAP-TYPE

trapDM2000FlashAlarm		13
This trap is issued when the Laser Modules detects an error during Flash memory operations.
TRAP-TYPE

trapDM2000LaserBiasCntLoopAlarm		14
This trap is issued when the Laser Modules detects an error in its Laser Bias control loop operation.
TRAP-TYPE

trapDM2000BankBootAlarm		15
This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1.
TRAP-TYPE

trapDM2000LaserBiasCntLoopInitAlarm		16
This trap is issued when the Laser Bias Control loop init fails.
TRAP-TYPE

trapDM2000RFParamInitAlarm		17
This trap is issued when the RF parameter Init fails.
TRAP-TYPE

trapDM2000TECParamInitAlarm		18
This trap is issued when the TEC Parameter Init fails.
TRAP-TYPE

trapDM2000AttnTableInitAlarm		19
This trap is issued when the Attenuator Table Init fails.
TRAP-TYPE

trapDM2000PowerMeterTableInitAlarm		20
This trap is issued when the Power Meter Table Init fails.
TRAP-TYPE

trapDM2000LaserDataCRCAlarm		21
This trap is issued when the Laser Data CRC is incorrect.
TRAP-TYPE

trapDM2000AlarmDataCRCAlarm		22
This trap is issued when the Alarm Data CRC is incorrect.
TRAP-TYPE

trapDM2000FactoryDataCRCAlarm		23
This trap is issued when the Factory Data CRC is incorrect.
TRAP-TYPE

trapDM2000UserRFOffAlarm		24
This trap is issued when the the User RF is turned off.
TRAP-TYPE

trapDM2000UserOpticalOffAlarm		25
This trap is issued when the User Optical Power is turned off.
TRAP-TYPE

trapDM2000ResetFactoryDefaultAlarm		26
This trap is issued when the Factory Default Reset occurs.
TRAP-TYPE