OLD-CISCO-SYS-MIB
File:
OLD-CISCO-SYS-MIB.mib (39911 bytes)
Imported modules
Imported symbols
Defined Values
romId |
2.1.1 |
This variable contains a printable octet
string which contains the System Bootstrap
description and version identification. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
whyReload |
2.1.2 |
This variable contains a printable octet
string which contains the reason why the
system was last restarted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
hostName |
2.1.3 |
This variable represents the name of the
host in printable ascii characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
domainName |
2.1.4 |
This variable is the domain portion of the
domain name of the host. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
authAddr |
2.1.5 |
This variable contains the last SNMP
authorization failure IP address. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
bootHost |
2.1.6 |
Contains the IP address of the host that
supplied the currently running software. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ping |
2.1.7 |
The ping mib object is obsolete as of IOS 10.2
It has been superseded by the Cisco Ping MIB |
Status: obsolete |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
freeMem |
2.1.8 |
The freeMem mib object is obsolete as of IOS 11.1
It has been replaced with the cisco memory pool mib |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferElFree |
2.1.9 |
Contains the number of free buffer
elements. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferElMax |
2.1.10 |
Contains the maximum number of buffer
elements. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferElHit |
2.1.11 |
Contains the number of buffer element hits. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferElMiss |
2.1.12 |
Contains the number of buffer element
misses. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferElCreate |
2.1.13 |
Contains the number of buffer element
creates. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferSmSize |
2.1.14 |
Contains the size of small buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferSmTotal |
2.1.15 |
Contains the total number of small buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferSmFree |
2.1.16 |
Contains the number of free small buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferSmMax |
2.1.17 |
Contains the maximum number of small
buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferSmHit |
2.1.18 |
Contains the number of small buffer hits. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferSmMiss |
2.1.19 |
Contains the number of small buffer misses. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferSmTrim |
2.1.20 |
Contains the number of small buffer trims. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferSmCreate |
2.1.21 |
Contains the number of small buffer
creates. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferMdSize |
2.1.22 |
Contains the size of medium buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferMdTotal |
2.1.23 |
Contains the total number of medium
buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferMdFree |
2.1.24 |
Contains the number of free medium buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferMdMax |
2.1.25 |
Contains the maximum number of medium
buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferMdHit |
2.1.26 |
Contains the number of medium buffer hits. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferMdMiss |
2.1.27 |
Contains the number of medium buffer
misses. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferMdTrim |
2.1.28 |
Contains the number of medium buffer trims. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferMdCreate |
2.1.29 |
Contains the number of medium buffer
creates. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferBgSize |
2.1.30 |
Contains the size of big buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferBgTotal |
2.1.31 |
Contains the total number of big buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferBgFree |
2.1.32 |
Contains the number of free big buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferBgMax |
2.1.33 |
Contains the maximum number of big buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferBgHit |
2.1.34 |
Contains the number of big buffer hits. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferBgMiss |
2.1.35 |
Contains the number of big buffer misses. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferBgTrim |
2.1.36 |
Contains the number of big buffer trims. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferBgCreate |
2.1.37 |
Contains the number of big buffer creates. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferLgSize |
2.1.38 |
Contains the size of large buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferLgTotal |
2.1.39 |
Contains the total number of large buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferLgFree |
2.1.40 |
Contains the number of free large buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferLgMax |
2.1.41 |
Contains the maximum number of large
buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferLgHit |
2.1.42 |
Contains the number of large buffer hits. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferLgMiss |
2.1.43 |
Contains the number of large buffer misses. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferLgTrim |
2.1.44 |
Contains the number of large buffer trims. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferLgCreate |
2.1.45 |
Contains the number of large buffer
creates. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferFail |
2.1.46 |
Count of the number of buffer allocation
failures. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferNoMem |
2.1.47 |
Count of the number of buffer create
failures due to no free memory. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
netConfigAddr |
2.1.48 |
Holds the address of the host that supplied
the network-confg file. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
netConfigName |
2.1.49 |
Holds the name of the network configuration
file. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
netConfigSet |
2.1.50 |
Cause the loading of a new network-confg
file using TFTP. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
hostConfigAddr |
2.1.51 |
Contains the address of the host that
provided the host-config file. |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hostConfigName |
2.1.52 |
Contains the name of the last configured
host-confg file. |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
hostConfigSet |
2.1.53 |
Cause the loading of a new host-confg file
using TFTP. |
Status: obsolete |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
writeMem |
2.1.54 |
Write configuration into non-volatile memory
/ erase config memory if 0. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
writeNet |
2.1.55 |
Write configuration to host using TFTP. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
busyPer |
2.1.56 |
CPU busy percentage in the last 5 second
period. Not the last 5 realtime seconds but
the last 5 second period in the scheduler. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
avgBusy1 |
2.1.57 |
1 minute exponentially-decayed moving
average of the CPU busy percentage. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
avgBusy5 |
2.1.58 |
5 minute exponentially-decayed moving
average of the CPU busy percentage. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
idleCount |
2.1.59 |
cisco internal variable. not to be used |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
idleWired |
2.1.60 |
cisco internal variable. not to be used |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferHgSize |
2.1.62 |
Contains the size of huge buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferHgTotal |
2.1.63 |
Contains the total number of huge buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferHgFree |
2.1.64 |
Contains the number of free huge buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferHgMax |
2.1.65 |
Contains the maximum number of huge
buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferHgHit |
2.1.66 |
Contains the number of huge buffer hits. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferHgMiss |
2.1.67 |
Contains the number of huge buffer misses. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferHgTrim |
2.1.68 |
Contains the number of huge buffer trims. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bufferHgCreate |
2.1.69 |
Contains the number of huge buffer creates. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
netConfigProto |
2.1.70 |
Holds the protocol that supplied the
network-confg file. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
hostConfigProto |
2.1.71 |
Holds the protocol that supplied the host-
confg file. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sysConfigAddr |
2.1.72 |
Holds the address of the host that supplied
the system boot image. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
sysConfigProto |
2.1.74 |
Holds the protocol that supplied the system
boot image. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sysClearARP |
2.1.75 |
Perform a clearing of the entire ARP cache
and invalidation of route caches. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sysClearInt |
2.1.76 |
Clear interface given IfIndex as value. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envPresent |
2.1.77 |
Is there an environmental monitor card in
this box?, 0 - No, 1-AGS card present, wrong
firmware, 2-AGS CARD present, firmware ok,
3-7000 support |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt1Descr |
2.1.78 |
Description of the test point 1. Typically
ambient air or the temperature of air
entering the router |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
envTestPt1Measure |
2.1.79 |
Current value of test point 1. Typically a
temperature in centigrade. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt2Descr |
2.1.80 |
Description of the test point 2. Typically
airflow or the temperature of air leaving the
router |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
envTestPt2Measure |
2.1.81 |
Current value of test point 2. Typically a
temperature in centigrade. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt3Measure |
2.1.83 |
Current value of test point 3. Typically the
value in millivolts of the +5v supply |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt4Measure |
2.1.85 |
Current value of test point 4. Typically the
value in millivolts of the +12v supply |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt5Measure |
2.1.87 |
Current value of test point 5. Typically the
value in millivolts of the -12v supply |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt6Measure |
2.1.89 |
Current value of test point 6. Typically the
value in millivolts of the -5v supply |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt1MarginVal |
2.1.90 |
Value at which the router will shutdown.
Typically the ambient air temperature that
will shut the router down. (e.g. 43) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt2MarginVal |
2.1.91 |
Value at which the router will shutdown.
Typically the airflow air temperature that
will shut the router down. (e.g. 58) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt3MarginPercent |
2.1.92 |
+/- Percentage that will shut the router
down, (e.g. 10%) typically +5 volt |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt4MarginPercent |
2.1.93 |
+/- Percentage that will shut the router
down, (e.g. 15%) typically +12 volt |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt5MarginPercent |
2.1.94 |
+/- Percentage that will shut the router
down, (e.g. 15%) typically -12 volt |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt6MarginPercent |
2.1.95 |
+/- Percentage that will shut the router
down, (e.g. 10%) typically -5 volt |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt1last |
2.1.96 |
Value of TestPt1 when last shutdown
occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt2last |
2.1.97 |
Value of TestPt2 when last shutdown
occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt3last |
2.1.98 |
Value of TestPt3 when last shutdown
occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt4last |
2.1.99 |
Value of TestPt4 when last shutdown
occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt5last |
2.1.100 |
Value of TestPt5 when last shutdown
occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt6last |
2.1.101 |
Value of TestPt6 when last shutdown
occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
envTestPt1warn |
2.1.102 |
Is this test point at a warning level? |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
warning(1), noWarning(2) |
|
envTestPt2warn |
2.1.103 |
Is this test point at a warning level? |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
warning(1), noWarning(2) |
|
envTestPt3warn |
2.1.104 |
Is this test point at a warning level? |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
warning(1), noWarning(2) |
|
envTestPt4warn |
2.1.105 |
Is this test point at a warning level? |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
warning(1), noWarning(2) |
|
envTestPt5warn |
2.1.106 |
Is this test point at a warning level? |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
warning(1), noWarning(2) |
|
envTestPt6warn |
2.1.107 |
Is this test point at a warning level? |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
warning(1), noWarning(2) |
|
envType |
2.1.110 |
The type of environmental card |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|