OKIDATA-MIB

File: OKIDATA-MIB.mib (247167 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

private enterprises NetworkAddress
IpAddress Counter Gauge
TimeTicks DisplayString mib-2
PhysAddress OBJECT-TYPE TRAP-TYPE

Defined Types

CfgEmulationEntry  
SEQUENCE    
  cfgEmulationIndex INTEGER 1..100
  cfgEmulationName DisplayString Size(0..20)

CfgTrayEntry  
SEQUENCE    
  cfgTrayIndex INTEGER 0..100
  cfgTrayName DisplayString Size(0..20)

Cfg2StoragePartitionEntry  
SEQUENCE    
  cfg2StoragePartitionIndex INTEGER
  cfg2StoragePartitionFree INTEGER

UsagePrinterUnitEntry  
SEQUENCE    
  usagePrinterUnitIndex INTEGER
  usagePrinterUnitCounter DisplayString
  usagePrinterUnitCounterLife DisplayString

UsageTrayEntry  
SEQUENCE    
  usageTrayIndex INTEGER
  usageTrayMaxLevel DisplayString
  usageTrayCounter DisplayString

UsageTonerEntry  
SEQUENCE    
  usageTonerIndex INTEGER
  usageTonerDescription DisplayString
  usageTonerCurrentLevel DisplayString
  usageTonerMaxLevel DisplayString
  usageTonerLevelUnit DisplayString

UsageDrumEntry  
SEQUENCE    
  usageDrumIndex INTEGER
  usageDrumCurrentLevel DisplayString
  usageDrumMaxLevel DisplayString

UsageBeltEntry  
SEQUENCE    
  usageBeltIndex INTEGER
  usageBeltCurrentLevel DisplayString
  usageBeltMaxLevel DisplayString

UsageFuserEntry  
SEQUENCE    
  usageFuserIndex INTEGER
  usageFuserCurrentLevel DisplayString
  usageFuserMaxLevel DisplayString

GenProtocolEntry  
SEQUENCE    
  genProtocolIndex INTEGER
  genProtocolDescr DisplayString
  genProtocolID INTEGER

SNMPTrapEntry  
SEQUENCE    
  snmpTrapMaskIndex INTEGER
  snmpTrapMaskString OCTET STRING

OutputCommandsEntry  
SEQUENCE    
  outputCancelCurrentJob INTEGER

OutputEntry  
SEQUENCE    
  outputIndex INTEGER
  outputName DisplayString
  outputStatusString DisplayString
  outputStatus INTEGER
  outputExtendedStatus INTEGER
  outputPrinter INTEGER
  outputLanguageSwitching INTEGER
  outputConfigLanguage INTEGER
  outputPCLString OCTET STRING
  outputPSString OCTET STRING
  outputSetting INTEGER
  outputOwner INTEGER
  outputBIDIStatusEnabled INTEGER
  outputPrinterModel DisplayString
  outputPrinterDisplay DisplayString
  outputCapabilities INTEGER
  outputHandshake INTEGER
  outputProtocolManager INTEGER

OutputJobLogEntry  
SEQUENCE    
  outputJobLogInformation DisplayString
  outputJobLogTime DisplayString

OutputTotalJobEntry  
SEQUENCE    
  outputTotalJobIndex INTEGER
  outputTotalJobsLogged INTEGER

TcpipTrapEntry  
SEQUENCE    
  tcpipTrapIndex INTEGER
  tcpipTrapDestination IpAddress
  tcpipPrinter2TrapMask INTEGER
  tcpipPrinterTrapMask INTEGER
  tcpipOutputTrapMask INTEGER

TcpipSecurityEntry  
SEQUENCE    
  tcpipSecurityIndex INTEGER
  tcpipSecureStartIPAddress IpAddress
  tcpipSecureEndIPAddress IpAddress
  tcpipSecurePrinterMask INTEGER
  tcpipSecureAdminEnabled INTEGER

TcpipMLPEntry  
SEQUENCE    
  tcpipMLPIndex INTEGER
  tcpipMLPName DisplayString
  tcpipMLPPort INTEGER
  tcpipMLPTCPPort INTEGER
  tcpipMLPPreString DisplayString
  tcpipMLPPostString DisplayString
  tcpipMLPDeleteBytes INTEGER

TcpipSmtpEntry  
SEQUENCE    
  tcpipSmtpIndex INTEGER
  tcpipSmtpEmailAddr OCTET STRING
  tcpipSmtpProtocolMask INTEGER
  tcpipSmtpPrinterMask INTEGER
  tcpipSmtpOutputMask INTEGER

NwFileServerEntry  
SEQUENCE    
  nwFileServerIndex INTEGER
  nwFileServerName DisplayString
  nwFileServerConnectionStatus INTEGER

NwPortEntry  
SEQUENCE    
  nwPortIndex INTEGER
  nwPortStatus DisplayString
  nwPortPrinterNumber INTEGER
  nwPortFontDownload INTEGER
  nwPortPCLQueue DisplayString
  nwPortPSQueue DisplayString
  nwPortFormsOn INTEGER
  nwPortFormNumber INTEGER
  nwPortNotification INTEGER

NwTrapEntry  
SEQUENCE    
  nwTrapIndex INTEGER
  nwTrapDestination OCTET STRING
  nwTrapDestinationNet OCTET STRING
  nwPrinter2TrapMask INTEGER
  nwPrinterTrapMask INTEGER
  nwOutputTrapMask INTEGER

BvPrintServiceEntry  
SEQUENCE    
  bvPrintServiceIndex INTEGER
  bvPrintServiceName DisplayString
  bvPrintServiceRouting INTEGER

BvPrintServiceStatusEntry  
SEQUENCE    
  bvPSStatusIndex INTEGER
  bvPSName DisplayString
  bvPSStatus DisplayString
  bvPSDestination INTEGER
  bvPrinterStatus DisplayString
  bvJobActive INTEGER
  bvJobSource DisplayString
  bvJobTitle DisplayString
  bvJobSize DisplayString
  bvJobNumber DisplayString

ETalkPortEntry  
SEQUENCE    
  eTalkPortIndex INTEGER
  eTalkPortEnable INTEGER
  eTalkName DisplayString
  eTalkActiveName DisplayString
  eTalkType1 DisplayString
  eTalkType2 DisplayString
  eTalkZone DisplayString
  eTalkActiveZone DisplayString

Defined Values

okidata 1.3.6.1.4.1.2001
OBJECT IDENTIFIER    

peripheral 1.3.6.1.4.1.2001.1
OBJECT IDENTIFIER    

printer 1.3.6.1.4.1.2001.1.1
OBJECT IDENTIFIER    

printserver 1.3.6.1.4.1.2001.1.2
OBJECT IDENTIFIER    

nip 1.3.6.1.4.1.2001.1.1.1
OBJECT IDENTIFIER    

inkjet 1.3.6.1.4.1.2001.1.1.2
OBJECT IDENTIFIER    

fax 1.3.6.1.4.1.2001.1.1.3
OBJECT IDENTIFIER    

mfp 1.3.6.1.4.1.2001.1.1.4
OBJECT IDENTIFIER    

sidm 1.3.6.1.4.1.2001.1.1.5
OBJECT IDENTIFIER    

niptype1 1.3.6.1.4.1.2001.1.1.1.1
OBJECT IDENTIFIER    

niptype2 1.3.6.1.4.1.2001.1.1.1.2
OBJECT IDENTIFIER    

cfg 1.3.6.1.4.1.2001.1.1.1.1.1
OBJECT IDENTIFIER    

stat 1.3.6.1.4.1.2001.1.1.1.1.2
OBJECT IDENTIFIER    

cfg2 1.3.6.1.4.1.2001.1.1.1.1.11
OBJECT IDENTIFIER    

usage 1.3.6.1.4.1.2001.1.1.1.1.100
OBJECT IDENTIFIER    

cfg2General 1.3.6.1.4.1.2001.1.1.1.1.11.1
OBJECT IDENTIFIER    

cfg2JobControl 1.3.6.1.4.1.2001.1.1.1.1.11.2
OBJECT IDENTIFIER    

cfg2PaperHandling 1.3.6.1.4.1.2001.1.1.1.1.11.3
OBJECT IDENTIFIER    

cfg2PrintProcessControl 1.3.6.1.4.1.2001.1.1.1.1.11.4
OBJECT IDENTIFIER    

cfg2HostInterface 1.3.6.1.4.1.2001.1.1.1.1.11.5
OBJECT IDENTIFIER    

cfg2LocalResources 1.3.6.1.4.1.2001.1.1.1.1.11.6
OBJECT IDENTIFIER    

cfg2Emulation 1.3.6.1.4.1.2001.1.1.1.1.11.7
OBJECT IDENTIFIER    

cfg2Test 1.3.6.1.4.1.2001.1.1.1.1.11.8
OBJECT IDENTIFIER    

cfg2Menu 1.3.6.1.4.1.2001.1.1.1.1.11.9
OBJECT IDENTIFIER    

usagePrinterUnit 1.3.6.1.4.1.2001.1.1.1.1.100.1
OBJECT IDENTIFIER    

usageTray 1.3.6.1.4.1.2001.1.1.1.1.100.2
OBJECT IDENTIFIER    

usageToner 1.3.6.1.4.1.2001.1.1.1.1.100.3
OBJECT IDENTIFIER    

usageDrum 1.3.6.1.4.1.2001.1.1.1.1.100.4
OBJECT IDENTIFIER    

usageBelt 1.3.6.1.4.1.2001.1.1.1.1.100.5
OBJECT IDENTIFIER    

usageFuser 1.3.6.1.4.1.2001.1.1.1.1.100.6
OBJECT IDENTIFIER    

usageOil 1.3.6.1.4.1.2001.1.1.1.1.100.7
OBJECT IDENTIFIER    

usageWasteToner 1.3.6.1.4.1.2001.1.1.1.1.100.8
OBJECT IDENTIFIER    

psVendor 1.3.6.1.4.1.2001.1.2.100
OBJECT IDENTIFIER    

okips 1.3.6.1.4.1.2001.1.2.683
OBJECT IDENTIFIER    

general 1.3.6.1.4.1.2001.1.2.683.1
OBJECT IDENTIFIER    

commands 1.3.6.1.4.1.2001.1.2.683.2
OBJECT IDENTIFIER    

okipsSNMP 1.3.6.1.4.1.2001.1.2.683.3
OBJECT IDENTIFIER    

okipsSNMPCommands 1.3.6.1.4.1.2001.1.2.683.3.2
OBJECT IDENTIFIER    

okipsSNMPTrapMasks 1.3.6.1.4.1.2001.1.2.683.3.6
OBJECT IDENTIFIER    

driver 1.3.6.1.4.1.2001.1.2.683.4
OBJECT IDENTIFIER    

tokenRing 1.3.6.1.4.1.2001.1.2.683.5
OBJECT IDENTIFIER    

printServers 1.3.6.1.4.1.2001.1.2.683.6
OBJECT IDENTIFIER    

psGeneral 1.3.6.1.4.1.2001.1.2.683.6.1
OBJECT IDENTIFIER    

psOutput 1.3.6.1.4.1.2001.1.2.683.6.2
OBJECT IDENTIFIER    

psProtocols 1.3.6.1.4.1.2001.1.2.683.6.3
OBJECT IDENTIFIER    

genProtocols 1.3.6.1.4.1.2001.1.2.683.1.15
OBJECT IDENTIFIER    

outputCommands 1.3.6.1.4.1.2001.1.2.683.6.2.2
OBJECT IDENTIFIER    

outputConfigure 1.3.6.1.4.1.2001.1.2.683.6.2.3
OBJECT IDENTIFIER    

outputJobLog 1.3.6.1.4.1.2001.1.2.683.6.2.6
OBJECT IDENTIFIER    

trCommands 1.3.6.1.4.1.2001.1.2.683.5.2
OBJECT IDENTIFIER    

trConfigure 1.3.6.1.4.1.2001.1.2.683.5.3
OBJECT IDENTIFIER    

tcpip 1.3.6.1.4.1.2001.1.2.683.6.3.1
OBJECT IDENTIFIER    

netware 1.3.6.1.4.1.2001.1.2.683.6.3.2
OBJECT IDENTIFIER    

vines 1.3.6.1.4.1.2001.1.2.683.6.3.3
OBJECT IDENTIFIER    

lanManager 1.3.6.1.4.1.2001.1.2.683.6.3.4
OBJECT IDENTIFIER    

eTalk 1.3.6.1.4.1.2001.1.2.683.6.3.5
OBJECT IDENTIFIER    

tcpipCommands 1.3.6.1.4.1.2001.1.2.683.6.3.1.3
OBJECT IDENTIFIER    

tcpipConfigure 1.3.6.1.4.1.2001.1.2.683.6.3.1.4
OBJECT IDENTIFIER    

tcpipStatus 1.3.6.1.4.1.2001.1.2.683.6.3.1.5
OBJECT IDENTIFIER    

nwCommands 1.3.6.1.4.1.2001.1.2.683.6.3.2.3
OBJECT IDENTIFIER    

nwConfigure 1.3.6.1.4.1.2001.1.2.683.6.3.2.4
OBJECT IDENTIFIER    

nwStatus 1.3.6.1.4.1.2001.1.2.683.6.3.2.5
OBJECT IDENTIFIER    

bvCommands 1.3.6.1.4.1.2001.1.2.683.6.3.3.3
OBJECT IDENTIFIER    

bvConfigure 1.3.6.1.4.1.2001.1.2.683.6.3.3.4
OBJECT IDENTIFIER    

bvStatus 1.3.6.1.4.1.2001.1.2.683.6.3.3.5
OBJECT IDENTIFIER    

eTalkCommands 1.3.6.1.4.1.2001.1.2.683.6.3.5.3
OBJECT IDENTIFIER    

eTalkConfigure 1.3.6.1.4.1.2001.1.2.683.6.3.5.4
OBJECT IDENTIFIER    

eTalkStatus 1.3.6.1.4.1.2001.1.2.683.6.3.5.5
OBJECT IDENTIFIER    

cfgPersonality 1.3.6.1.4.1.2001.1.1.1.1.1.20
Printer language that is interpreted according to default setting.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgManualFeed 1.3.6.1.4.1.2001.1.1.1.1.1.30
Manual Feed Valid/Invalid
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiPaperFeed 1.3.6.1.4.1.2001.1.1.1.1.1.40
Paper Tray
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiAutoTraySwitch 1.3.6.1.4.1.2001.1.1.1.1.1.50
Auto Tray Switch Valid/Invalid
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiPriorityTray 1.3.6.1.4.1.2001.1.1.1.1.1.55
Priority Tray Valid/Invalid
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPaper 1.3.6.1.4.1.2001.1.1.1.1.1.60
Edit size
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiCustomPaperWidth 1.3.6.1.4.1.2001.1.1.1.1.1.61
Custom Paper Width(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiCustomPaperLength 1.3.6.1.4.1.2001.1.1.1.1.1.62
Custom Paper Length(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgInTray2Size 1.3.6.1.4.1.2001.1.1.1.1.1.70
Size of media in Upper Tray.(This has no meaning to the printer with the paper size auto-detecting function.)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgInTray3Size 1.3.6.1.4.1.2001.1.1.1.1.1.80
Size of media in Lower Tray.(This has no meaning to the printer with the paper size auto-detecting function.)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgInTray5Size 1.3.6.1.4.1.2001.1.1.1.1.1.90
Size of media in Tray3.(This has no meaning to the printer with the paper size auto-detecting function.)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgInTray1Size 1.3.6.1.4.1.2001.1.1.1.1.1.100
Size of media loeded in Front Tray/Manual Feeder.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgInTray4Size 1.3.6.1.4.1.2001.1.1.1.1.1.110
Size of paper inserted in the multi-purpose Feeder.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiMediaInTray2 1.3.6.1.4.1.2001.1.1.1.1.1.120
Types(Weight) of media loeded in Upper Tray.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiMediaInTray3 1.3.6.1.4.1.2001.1.1.1.1.1.130
Types(Weight) of media loaded in Lower Tray.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiMediaInTray5 1.3.6.1.4.1.2001.1.1.1.1.1.140
Types(Weight) of media loaded in Tray3.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiMediaInTray1 1.3.6.1.4.1.2001.1.1.1.1.1.150
Types(Weight) of media loaded in Front Tray/Manual Feeder
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiMediaInTray4 1.3.6.1.4.1.2001.1.1.1.1.1.160
Types(Weight) of media loaded in Multi-purpose Feeder
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiPaperSizeCheck 1.3.6.1.4.1.2001.1.1.1.1.1.170
Paper Length Check valid/invalid
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgMptray 1.3.6.1.4.1.2001.1.1.1.1.1.180
Returns the configuration value of the front tray
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIntray1 1.3.6.1.4.1.2001.1.1.1.1.1.190
Returns the auto-selection lock status for the front tray (MP tray)
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIntray2 1.3.6.1.4.1.2001.1.1.1.1.1.200
Returns the auto-selection lock status for the standard cassette
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIntray3 1.3.6.1.4.1.2001.1.1.1.1.1.210
Returns the auto-selection lock status for the optional cassette
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgCopies 1.3.6.1.4.1.2001.1.1.1.1.1.220
Number of Copies(1-999)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgDuplex 1.3.6.1.4.1.2001.1.1.1.1.1.230
Duplex valid/invalid
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgBinding 1.3.6.1.4.1.2001.1.1.1.1.1.240
Binding Direction
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclFontSource 1.3.6.1.4.1.2001.1.1.1.1.1.250
Font Source
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclFontNumber 1.3.6.1.4.1.2001.1.1.1.1.1.260
Font Number
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclPitch 1.3.6.1.4.1.2001.1.1.1.1.1.270
Font Pitch (CPI)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclPtSize 1.3.6.1.4.1.2001.1.1.1.1.1.280
Font Height (Point)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclSymSet 1.3.6.1.4.1.2001.1.1.1.1.1.290
Symbol Set
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclOkiA4PrintWidth 1.3.6.1.4.1.2001.1.1.1.1.1.300
How many columns are printed in A4 width (78 or 80 columns)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclOkiWhitePageSkip 1.3.6.1.4.1.2001.1.1.1.1.1.310
Blank page print skip (OFF means No skip)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclOkiCrFunction 1.3.6.1.4.1.2001.1.1.1.1.1.320
Function when CR is received CR:CR only , CRLF:CR+LF
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclOkiLfFunction 1.3.6.1.4.1.2001.1.1.1.1.1.330
Function when LF is received LF:LF only , LFCR:LF+CR
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprCharacterPitch 1.3.6.1.4.1.2001.1.1.1.1.1.340
Character Pitch (CPI)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprFontCondense 1.3.6.1.4.1.2001.1.1.1.1.1.350
12CPI Pitch in Condense: 20:12cpi to 20cpi 12:12cpi to 12cpi
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprCharacterSet 1.3.6.1.4.1.2001.1.1.1.1.1.360
Character Set
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprSymbolSet 1.3.6.1.4.1.2001.1.1.1.1.1.370
Symbol Set(Code Page)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprLetterOStyle 1.3.6.1.4.1.2001.1.1.1.1.1.380
O(Ou style) DISABLE : ENABLE :O with slash
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprLinePitch 1.3.6.1.4.1.2001.1.1.1.1.1.390
Line per Inch (LPI)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprWhitePageSkip 1.3.6.1.4.1.2001.1.1.1.1.1.400
Blank page print skip (OFF means No skip)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprCrFunction 1.3.6.1.4.1.2001.1.1.1.1.1.410
Function upon receiving CR(Cursor CR) CR:CR only , CRLF:CR+LF
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprLfFunction 1.3.6.1.4.1.2001.1.1.1.1.1.420
Function upon receiving LF(Cursor LF) LF:LF only , LFCR:LF+CR
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprLineLength 1.3.6.1.4.1.2001.1.1.1.1.1.430
Number of characters in a line(columns)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprFormLength 1.3.6.1.4.1.2001.1.1.1.1.1.440
Paper length (Inches) 11:Letter , 11.7:A4 , 12:12inches
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprTofPosition 1.3.6.1.4.1.2001.1.1.1.1.1.450
Print start position from top edge of paper(0-1.0)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgIbmpprLeftMargine 1.3.6.1.4.1.2001.1.1.1.1.1.460
Left margin(0-1.0)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxCharacterPitch 1.3.6.1.4.1.2001.1.1.1.1.1.470
Character Pitch (CPI)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxCharacterSet 1.3.6.1.4.1.2001.1.1.1.1.1.480
Character Set
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxSymbolSet 1.3.6.1.4.1.2001.1.1.1.1.1.490
Symbol Set(Code Page)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxLetterOStyle 1.3.6.1.4.1.2001.1.1.1.1.1.500
0(Ou style) DISABLE : ENABLE :O with slash
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxLinePitch 1.3.6.1.4.1.2001.1.1.1.1.1.510
Line per Inch (LPI)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxWhitePageSkip 1.3.6.1.4.1.2001.1.1.1.1.1.520
Blank page print skip (OFF means No skip)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxCrFunction 1.3.6.1.4.1.2001.1.1.1.1.1.530
Function upon receiving CR(Cursor CR) CR:CR only , CRLF:CR+LF
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxLineLength 1.3.6.1.4.1.2001.1.1.1.1.1.540
Number of characters in a line(columns)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxFormLength 1.3.6.1.4.1.2001.1.1.1.1.1.550
Paper length (Inches) 11:Letter , 11.7:A4 , 12:12inches
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxTofPosition 1.3.6.1.4.1.2001.1.1.1.1.1.560
Print start position from top edge of paper (0-1.0)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEpsonfxLeftMargine 1.3.6.1.4.1.2001.1.1.1.1.1.570
Left margin(0-1.0)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgHiperwOkiDensity 1.3.6.1.4.1.2001.1.1.1.1.1.580
Hiper-W Data Resolution
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgHiperwOkiFirstbit 1.3.6.1.4.1.2001.1.1.1.1.1.590
Data bit order
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgHiperwOkiReverse 1.3.6.1.4.1.2001.1.1.1.1.1.600
Posi/Nega Print
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgHiperwPrintSpeed 1.3.6.1.4.1.2001.1.1.1.1.1.610
Engine Print Speed
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEscpKanjiFont 1.3.6.1.4.1.2001.1.1.1.1.1.611
Kanji Font(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEscpAnkFont 1.3.6.1.4.1.2001.1.1.1.1.1.612
Ank Font(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEscpCharacterSet 1.3.6.1.4.1.2001.1.1.1.1.1.613
Character Set(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEscpZeroCharacter 1.3.6.1.4.1.2001.1.1.1.1.1.614
O Character(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEscpZoom 1.3.6.1.4.1.2001.1.1.1.1.1.615
Zoom(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEscpTofPosition 1.3.6.1.4.1.2001.1.1.1.1.1.616
Tof Position(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEscpLineLength 1.3.6.1.4.1.2001.1.1.1.1.1.617
Line Length(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEscpCrFunction 1.3.6.1.4.1.2001.1.1.1.1.1.618
Cr Function(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEscpAutoLf 1.3.6.1.4.1.2001.1.1.1.1.1.619
Auto Lf(Only Japan)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOrientation 1.3.6.1.4.1.2001.1.1.1.1.1.620
Orientation
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgFormLines 1.3.6.1.4.1.2001.1.1.1.1.1.630
Lines per page
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgParallel 1.3.6.1.4.1.2001.1.1.1.1.1.640
Parallel Interface valid/invalid
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs232c 1.3.6.1.4.1.2001.1.1.1.1.1.650
RS232C valid/invalid
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs422 1.3.6.1.4.1.2001.1.1.1.1.1.660
RS422 valid/invalid
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgLocalTalk 1.3.6.1.4.1.2001.1.1.1.1.1.670
LocalTalk valid/invalid
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgNetwork 1.3.6.1.4.1.2001.1.1.1.1.1.680
Network(OKIHSP) valid/invalid
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgUsb 1.3.6.1.4.1.2001.1.1.1.1.1.690
USB valid/invalid
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgResolution 1.3.6.1.4.1.2001.1.1.1.1.1.2000
Print resolution
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRet 1.3.6.1.4.1.2001.1.1.1.1.1.2010
Smoothing(Oki Smoothing Technology)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiRasterBuffer 1.3.6.1.4.1.2001.1.1.1.1.1.2020
Raster Buffer size
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPageProtect 1.3.6.1.4.1.2001.1.1.1.1.1.2030
Page Protection
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPrintProtect 1.3.6.1.4.1.2001.1.1.1.1.1.2035
Print Protection
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiReceiveBuffer 1.3.6.1.4.1.2001.1.1.1.1.1.2040
Receive Buffer size (KB)
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiFontProtection 1.3.6.1.4.1.2001.1.1.1.1.1.2050
Font cache size n*100KB
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiResourceSave 1.3.6.1.4.1.2001.1.1.1.1.1.2060
Resource save size n*100KB
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgAutoCont 1.3.6.1.4.1.2001.1.1.1.1.1.2070
Auto continuation at error occurrence
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiAutoEject 1.3.6.1.4.1.2001.1.1.1.1.1.2080
Paper eject at receive time-out(Sec)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgManualTimeOut 1.3.6.1.4.1.2001.1.1.1.1.1.2090
Manual Insert timeout 0:infinit,30:30sec,60:1min
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgDensity 1.3.6.1.4.1.2001.1.1.1.1.1.2100
Print darkness for mono printer
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiYellowDarkness 1.3.6.1.4.1.2001.1.1.1.1.1.2101
Yellow print darkness for color printer
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiMagentaDarkness 1.3.6.1.4.1.2001.1.1.1.1.1.2102
Magenta print darkness for color printer
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiCyanDarkness 1.3.6.1.4.1.2001.1.1.1.1.1.2103
Cyan print darkness for color printer
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiBlackDarkness 1.3.6.1.4.1.2001.1.1.1.1.1.2104
Black print darkness for color printer
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiPowerSaving 1.3.6.1.4.1.2001.1.1.1.1.1.2110
Time for shifting to Power Save Mode 0:0Sec , 8:8Min
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiQuietMode 1.3.6.1.4.1.2001.1.1.1.1.1.2115
Quiet Mode ON:Default
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgLowToner 1.3.6.1.4.1.2001.1.1.1.1.1.2120
Off:shift to On-line in Toner Low state On:remaining On-line
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEconoMode 1.3.6.1.4.1.2001.1.1.1.1.1.2130
Toner saving
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgClearableWarnings 1.3.6.1.4.1.2001.1.1.1.1.1.2140
Handling of clearable warning JOB:Clearing by jobs
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiPrintErrors 1.3.6.1.4.1.2001.1.1.1.1.1.2150
Outputing report at error occurrence.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgParallelSpeed 1.3.6.1.4.1.2001.1.1.1.1.1.2160
Parallel I/F receiving speed
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgBiDirection 1.3.6.1.4.1.2001.1.1.1.1.1.2170
Bi-directional parallel
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiIPrime 1.3.6.1.4.1.2001.1.1.1.1.1.2180
I-Prime valid/invalid On:valid
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgLang 1.3.6.1.4.1.2001.1.1.1.1.1.2190
Local message language
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiJobSwitch 1.3.6.1.4.1.2001.1.1.1.1.1.2195
Job Switch Timing
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs232cBaud 1.3.6.1.4.1.2001.1.1.1.1.1.2200
RS232C Baud Rate
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs232cDataBits 1.3.6.1.4.1.2001.1.1.1.1.1.2210
RS232C Data Bit length
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs232cStopBits 1.3.6.1.4.1.2001.1.1.1.1.1.2215
RS232C Stop Bits
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs232cParity 1.3.6.1.4.1.2001.1.1.1.1.1.2220
RS232C Parity
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs232cBusyTime 1.3.6.1.4.1.2001.1.1.1.1.1.2230
RS232C Minimum Busy time
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs232cFlowControl 1.3.6.1.4.1.2001.1.1.1.1.1.2240
RS232C Flow Control
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs422Baud 1.3.6.1.4.1.2001.1.1.1.1.1.2300
RS422 Baud Rate
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs422DataBits 1.3.6.1.4.1.2001.1.1.1.1.1.2310
RS422 Data Bit length
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs422StopBits 1.3.6.1.4.1.2001.1.1.1.1.1.2320
RS422 stop bits
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRs422Parity 1.3.6.1.4.1.2001.1.1.1.1.1.2330
RS422 Parity
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiUser 1.3.6.1.4.1.2001.1.1.1.1.1.3000
User
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiEcp 1.3.6.1.4.1.2001.1.1.1.1.1.3005
ECP mode Setting(User Maintenance)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiXAdjust 1.3.6.1.4.1.2001.1.1.1.1.1.3010
X Adjust Value(User Maintenance)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiYAdjust 1.3.6.1.4.1.2001.1.1.1.1.1.3020
Y Adjust Value(User Maintenance)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiDuplexAdjust 1.3.6.1.4.1.2001.1.1.1.1.1.3022
Duplex Position Adjust Value
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiMediaSourceTray2 1.3.6.1.4.1.2001.1.1.1.1.1.3024
Feeding destination of 2nd tray in PCL5 Emulation (User Maintenance)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiMediaSourceTray3 1.3.6.1.4.1.2001.1.1.1.1.1.3025
Feeding destination of 3rd tray in PCL5 Emulation (User Maintenance)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiMediaSourceFront 1.3.6.1.4.1.2001.1.1.1.1.1.3026
Feeding destination of Front tray in PCL5 Emulation (User Maintenance)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPlacePage 1.3.6.1.4.1.2001.1.1.1.1.1.3028
The mechanical sheet setting position(User Maintenance)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiColorAdjustPrint 1.3.6.1.4.1.2001.1.1.1.1.1.3041
Print position Adjustment for color printer
Status: optional Access: write-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiColorAdjustYellow 1.3.6.1.4.1.2001.1.1.1.1.1.3042
Yellow print position Adjustment for color printer Value: Left, Center, Right ; Range: -7 to 7
Status: optional Access: write-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiColorAdjustMagenta 1.3.6.1.4.1.2001.1.1.1.1.1.3043
Magenta print position Adjustment for color printer Value: Left, Center, Right ; Range: -7 to 7
Status: optional Access: write-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiColorAdjustCyan 1.3.6.1.4.1.2001.1.1.1.1.1.3044
Cyan print position Adjustment for color printer Value: Left, Center, Right ; Range: -7 to 7
Status: optional Access: write-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgOkiJamRecovery 1.3.6.1.4.1.2001.1.1.1.1.1.3142
Jam Recovery Mode(User Maintenance)
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgFirmCpuVersion 1.3.6.1.4.1.2001.1.1.1.1.1.3160
Firmware Version ex. FW = 01.00 A00 C745 (F/W ver . User . CPU ver)
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEngineFirmVersion 1.3.6.1.4.1.2001.1.1.1.1.1.3170
Engine Version ex. ENG = 01.00
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgMessageVersion 1.3.6.1.4.1.2001.1.1.1.1.1.3180
Local Message Version ex. MSG = L01.00,P01.20
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclFirmVersion 1.3.6.1.4.1.2001.1.1.1.1.1.3190
PCL5e Version
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPclxlFirmVersion 1.3.6.1.4.1.2001.1.1.1.1.1.3200
PCL-XL Version
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgSidmFirmVersion 1.3.6.1.4.1.2001.1.1.1.1.1.3210
SIDM Version
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgHdFirmVersion 1.3.6.1.4.1.2001.1.1.1.1.1.3220
Hex dump Version
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPsFirmVersion 1.3.6.1.4.1.2001.1.1.1.1.1.3230
PostScript Version
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgEmulationTable 1.3.6.1.4.1.2001.1.1.1.1.1.3500
Installed emulation name table
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CfgEmulationEntry

cfgEmulationEntry 1.3.6.1.4.1.2001.1.1.1.1.1.3500.1
Installed emulation name entry
Status: optional Access: not-accessible
OBJECT-TYPE    
  CfgEmulationEntry  

cfgEmulationIndex 1.3.6.1.4.1.2001.1.1.1.1.1.3500.1.1
Installed emulation name index
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

cfgEmulationName 1.3.6.1.4.1.2001.1.1.1.1.1.3500.1.2
Installed emulation name
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgRamInstalledSize 1.3.6.1.4.1.2001.1.1.1.1.1.3510
Installed RAM size
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgTrayTable 1.3.6.1.4.1.2001.1.1.1.1.1.3520
Installed tray name table
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CfgTrayEntry

cfgTrayEntry 1.3.6.1.4.1.2001.1.1.1.1.1.3520.1
Installed tray name entry
Status: optional Access: not-accessible
OBJECT-TYPE    
  CfgTrayEntry  

cfgTrayIndex 1.3.6.1.4.1.2001.1.1.1.1.1.3520.1.1
Installed tray name index
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

cfgTrayName 1.3.6.1.4.1.2001.1.1.1.1.1.3520.1.2
Installed tray name
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cfgPrinterName 1.3.6.1.4.1.2001.1.1.1.1.1.3530
Printer model name
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

stPjlStatus 1.3.6.1.4.1.2001.1.1.1.1.2.10
PJL Status Code (Refer to the System Spec PJL Version for codes.)
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

stLcdMessage 1.3.6.1.4.1.2001.1.1.1.1.2.20
Character strings displayed on LCD. An extension of Roman-8 applies to Symbol Set.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

stOnline 1.3.6.1.4.1.2001.1.1.1.1.2.30
Host Interface's on-line state TRUE:ON-LINE , FALSE:OFF-LINE
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

stManualLedStatus 1.3.6.1.4.1.2001.1.1.1.1.2.100
MANUAL LED status on front panel.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

stOperatorLedStatus 1.3.6.1.4.1.2001.1.1.1.1.2.110
OPERATOR LED status on front panel.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

stServiceLedStatus 1.3.6.1.4.1.2001.1.1.1.1.2.120
SERVICE LED status on front panel.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

stOnlineLedStatus 1.3.6.1.4.1.2001.1.1.1.1.2.130
ON-LINE LED status on front panel.)
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

stPsStatus 1.3.6.1.4.1.2001.1.1.1.1.2.140
PS message same as when the printer receives ^T(CTR-T)
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..100)  

cfg2PrinterInformation 1.3.6.1.4.1.2001.1.1.1.1.11.1.10
OBJECT IDENTIFIER    

cfg2PrinterConsumption 1.3.6.1.4.1.2001.1.1.1.1.11.1.20
OBJECT IDENTIFIER    

cfg2JamRecovery 1.3.6.1.4.1.2001.1.1.1.1.11.1.70
OBJECT IDENTIFIER    

cfg2JamRecoveryCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.1.70.2
Jam recovery setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2OPPanelLock 1.3.6.1.4.1.2001.1.1.1.1.11.1.130
OBJECT IDENTIFIER    

cfg2OPPanelLockCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.1.130.2
Operation Panel setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Controlt 1.3.6.1.4.1.2001.1.1.1.1.11.1.160
OBJECT IDENTIFIER    

cfg2ControltCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.1.160.2
Control T setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Type1MIBVersion 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.10
Type1 MIB Version
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2ModelId 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.30
Printer Model ID
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersions 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50
OBJECT IDENTIFIER    

cfg2PrinterVersion1Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.1
OBJECT IDENTIFIER    

cfg2PrinterVersion2Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.2
OBJECT IDENTIFIER    

cfg2PrinterVersion3Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.3
OBJECT IDENTIFIER    

cfg2PrinterVersion4Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.4
OBJECT IDENTIFIER    

cfg2PrinterVersion5Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.5
OBJECT IDENTIFIER    

cfg2PrinterVersion6Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.6
OBJECT IDENTIFIER    

cfg2PrinterVersion7Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.7
OBJECT IDENTIFIER    

cfg2PrinterVersion8Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.8
OBJECT IDENTIFIER    

cfg2PrinterVersion9Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.9
OBJECT IDENTIFIER    

cfg2PrinterVersion10Table 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.10
OBJECT IDENTIFIER    

cfg2PrinterVersion1 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.1.2
Printer Version1
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersion2 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.2.2
Printer Version2
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersion3 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.3.2
Printer Version3
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersion4 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.4.2
Printer Version4
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersion5 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.5.2
Printer Version5
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersion6 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.6.2
Printer Version6
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersion7 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.7.2
Printer Version7
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersion8 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.8.2
Printer Version8
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersion9 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.9.2
Printer Version9
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterVersion10 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.50.10.2
Printer Version10
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PrinterType 1.3.6.1.4.1.2001.1.1.1.1.11.1.10.70
Printer Type
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

cfg2PowerSave 1.3.6.1.4.1.2001.1.1.1.1.11.1.20.10
OBJECT IDENTIFIER    

cfg2PowerSaveCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.1.20.10.2
PowerSave setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2PowerSaveShift 1.3.6.1.4.1.2001.1.1.1.1.11.1.20.11
OBJECT IDENTIFIER    

cfg2PowerSaveShiftCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.1.20.11.2
PowerSave Shift setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2PHCommon 1.3.6.1.4.1.2001.1.1.1.1.11.3.1
OBJECT IDENTIFIER    

cfg2PHInput 1.3.6.1.4.1.2001.1.1.1.1.11.3.2
OBJECT IDENTIFIER    

cfg2PHOutput 1.3.6.1.4.1.2001.1.1.1.1.11.3.3
OBJECT IDENTIFIER    

cfg2PHDuplex 1.3.6.1.4.1.2001.1.1.1.1.11.3.4
OBJECT IDENTIFIER    

cfg2MonoPrintSpeed 1.3.6.1.4.1.2001.1.1.1.1.11.3.1.20
OBJECT IDENTIFIER    

cfg2MonoPrintSpeedCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.1.20.2
Mono Print Speed setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2PriorityTray 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.30
OBJECT IDENTIFIER    

cfg2PriorityTrayCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.30.2
Priority Tray setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2TrayTable 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40
OBJECT IDENTIFIER    

cfg2Tray1Table 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.1
OBJECT IDENTIFIER    

cfg2Tray2Table 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.2
OBJECT IDENTIFIER    

cfg2Tray3Table 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.3
OBJECT IDENTIFIER    

cfg2Tray4Table 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.4
OBJECT IDENTIFIER    

cfg2Tray5Table 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.5
OBJECT IDENTIFIER    

cfg2Tray6Table 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.6
OBJECT IDENTIFIER    

cfg2Tray7Table 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.7
OBJECT IDENTIFIER    

cfg2Tray1PaperSize 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.1.1
OBJECT IDENTIFIER    

cfg2Tray2PaperSize 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.2.1
OBJECT IDENTIFIER    

cfg2Tray3PaperSize 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.3.1
OBJECT IDENTIFIER    

cfg2Tray4PaperSize 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.4.1
OBJECT IDENTIFIER    

cfg2Tray5PaperSize 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.5.1
OBJECT IDENTIFIER    

cfg2Tray6PaperSize 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.6.1
OBJECT IDENTIFIER    

cfg2Tray7PaperSize 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.7.1
OBJECT IDENTIFIER    

cfg2Tray1PaperSizeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.1.1.2
Tray1 Paper Size setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray2PaperSizeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.2.1.2
Tray2 Paper Size setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray3PaperSizeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.3.1.2
Tray3 Paper Size setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray4PaperSizeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.4.1.2
Tray4 Paper Size setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray5PaperSizeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.5.1.2
Tray5 Paper Size setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray6PaperSizeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.6.1.2
Tray6 Paper Size setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray7PaperSizeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.7.1.2
Tray7 Paper Size setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray1MediaType 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.1.2
OBJECT IDENTIFIER    

cfg2Tray2MediaType 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.2.2
OBJECT IDENTIFIER    

cfg2Tray3MediaType 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.3.2
OBJECT IDENTIFIER    

cfg2Tray4MediaType 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.4.2
OBJECT IDENTIFIER    

cfg2Tray5MediaType 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.5.2
OBJECT IDENTIFIER    

cfg2Tray6MediaType 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.6.2
OBJECT IDENTIFIER    

cfg2Tray7MediaType 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.7.2
OBJECT IDENTIFIER    

cfg2Tray1MediaTypeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.1.2.2
Tray1 Media Type setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray2MediaTypeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.2.2.2
Tray2 Media Type setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray3MediaTypeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.3.2.2
Tray3 Media Type setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray4MediaTypeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.4.2.2
Tray4 Media Type setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray5MediaTypeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.5.2.2
Tray5 Media Type setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray6MediaTypeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.6.2.2
Tray6 Media Type setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray7MediaTypeCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.7.2.2
Tray7 Media Type setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray1MediaWeight 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.1.3
OBJECT IDENTIFIER    

cfg2Tray2MediaWeight 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.2.3
OBJECT IDENTIFIER    

cfg2Tray3MediaWeight 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.3.3
OBJECT IDENTIFIER    

cfg2Tray4MediaWeight 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.4.3
OBJECT IDENTIFIER    

cfg2Tray5MediaWeight 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.5.3
OBJECT IDENTIFIER    

cfg2Tray6MediaWeight 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.6.3
OBJECT IDENTIFIER    

cfg2Tray7MediaWeight 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.7.3
OBJECT IDENTIFIER    

cfg2Tray1MediaWeightCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.1.3.2
Tray1 Media Weight setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray2MediaWeightCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.2.3.2
Tray2 Media Weight setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray3MediaWeightCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.3.3.2
Tray3 Media Weight setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray4MediaWeightCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.4.3.2
Tray4 Media Weight setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray5MediaWeightCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.5.3.2
Tray5 Media Weight setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray6MediaWeightCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.6.3.2
Tray6 Media Weight setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray7MediaWeightCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.40.7.3.2
Tray7 Media Weight setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2UnitOfMeasure 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.50
OBJECT IDENTIFIER    

cfg2UnitOfMeasureCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.50.2
Unit of Measure setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2XDimension 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.60
OBJECT IDENTIFIER    

cfg2XDimensionCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.60.2
X Dimension setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2YDimension 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.70
OBJECT IDENTIFIER    

cfg2YDimensionCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.70.2
Y Dimension setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2TrayA3Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90
OBJECT IDENTIFIER    

cfg2Tray1A3Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.1
OBJECT IDENTIFIER    

cfg2Tray2A3Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.2
OBJECT IDENTIFIER    

cfg2Tray3A3Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.3
OBJECT IDENTIFIER    

cfg2Tray4A3Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.4
OBJECT IDENTIFIER    

cfg2Tray5A3Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.5
OBJECT IDENTIFIER    

cfg2Tray6A3Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.6
OBJECT IDENTIFIER    

cfg2Tray7A3Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.7
OBJECT IDENTIFIER    

cfg2Tray1A3PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.1.2
Tray1 A3 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray2A3PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.2.2
Tray2 A3 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray3A3PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.3.2
Tray3 A3 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray4A3PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.4.2
Tray4 A3 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray5A3PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.5.2
Tray5 A3 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray6A3PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.6.2
Tray6 A3 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray7A3PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.90.7.2
Tray7 A3 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2TrayLegal14Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100
OBJECT IDENTIFIER    

cfg2Tray1Legal14Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.1
OBJECT IDENTIFIER    

cfg2Tray2Legal14Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.2
OBJECT IDENTIFIER    

cfg2Tray3Legal14Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.3
OBJECT IDENTIFIER    

cfg2Tray4Legal14Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.4
OBJECT IDENTIFIER    

cfg2Tray5Legal14Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.5
OBJECT IDENTIFIER    

cfg2Tray6Legal14Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.6
OBJECT IDENTIFIER    

cfg2Tray7Legal14Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.7
OBJECT IDENTIFIER    

cfg2Tray1Legal14PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.1.2
Tray1 Legal14 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray2Legal14PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.2.2
Tray2 Legal14 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray3Legal14PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.3.2
Tray3 Legal14 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray4Legal14PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.4.2
Tray4 Legal14 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray5Legal14PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.5.2
Tray5 Legal14 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray6Legal14PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.6.2
Tray6 Legal14 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray7Legal14PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.100.7.2
Tray7 Legal14 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2TrayA5A6Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110
OBJECT IDENTIFIER    

cfg2Tray1A5A6Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.1
OBJECT IDENTIFIER    

cfg2Tray2A5A6Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.2
OBJECT IDENTIFIER    

cfg2Tray3A5A6Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.3
OBJECT IDENTIFIER    

cfg2Tray4A5A6Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.4
OBJECT IDENTIFIER    

cfg2Tray5A5A6Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.5
OBJECT IDENTIFIER    

cfg2Tray6A5A6Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.6
OBJECT IDENTIFIER    

cfg2Tray7A5A6Paper 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.7
OBJECT IDENTIFIER    

cfg2Tray1A5A6PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.1.2
Tray1 A5/A6 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray2A5A6PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.2.2
Tray2 A5/A6 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray3A5A6PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.3.2
Tray3 A5/A6 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray4A5A6PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.4.2
Tray4 A5/A6 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray5A5A6PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.5.2
Tray5 A5/A6 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray6A5A6PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.6.2
Tray6 A5/A6 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Tray7A5A6PaperCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.2.110.7.2
Tray7 A5/A6 Paper setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2OutputBin 1.3.6.1.4.1.2001.1.1.1.1.11.3.3.10
OBJECT IDENTIFIER    

cfg2OutputBinCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.3.10.2
Output Bin setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Duplex 1.3.6.1.4.1.2001.1.1.1.1.11.3.4.10
OBJECT IDENTIFIER    

cfg2DuplexCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.4.10.2
Duplex setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2Binding 1.3.6.1.4.1.2001.1.1.1.1.11.3.4.20
OBJECT IDENTIFIER    

cfg2BindingCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.3.4.20.2
Binding setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2PPCColor 1.3.6.1.4.1.2001.1.1.1.1.11.4.1
OBJECT IDENTIFIER    

cfg2PPCDevelopmentControl 1.3.6.1.4.1.2001.1.1.1.1.11.4.2
OBJECT IDENTIFIER    

cfg2PPCLEDHeadControl 1.3.6.1.4.1.2001.1.1.1.1.11.4.3
OBJECT IDENTIFIER    

cfg2PPCFusingControl 1.3.6.1.4.1.2001.1.1.1.1.11.4.4
OBJECT IDENTIFIER    

cfg2PPCPrintPositionControl 1.3.6.1.4.1.2001.1.1.1.1.11.4.5
OBJECT IDENTIFIER    

cfg2PPCTonerControl 1.3.6.1.4.1.2001.1.1.1.1.11.4.6
OBJECT IDENTIFIER    

cfg2PPCDrumControl 1.3.6.1.4.1.2001.1.1.1.1.11.4.7
OBJECT IDENTIFIER    

cfg2AutoRegistration 1.3.6.1.4.1.2001.1.1.1.1.11.4.1.30
OBJECT IDENTIFIER    

cfg2AutoRegistrationCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.4.1.30.2
Auto Registration setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2JobOffset 1.3.6.1.4.1.2001.1.1.1.1.11.4.2.20
OBJECT IDENTIFIER    

cfg2JobOffsetCurrentValue 1.3.6.1.4.1.2001.1.1.1.1.11.4.2.20.2
Job Offset setting
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString  

cfg2LRCommon 1.3.6.1.4.1.2001.1.1.1.1.11.6.1
OBJECT IDENTIFIER    

cfg2LRMemory 1.3.6.1.4.1.2001.1.1.1.1.11.6.2
OBJECT IDENTIFIER    

cfg2LRHdd 1.3.6.1.4.1.2001.1.1.1.1.11.6.3
OBJECT IDENTIFIER    

cfg2StoragePartitionTable 1.3.6.1.4.1.2001.1.1.1.1.11.6.1.1
storage partition table
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cfg2StoragePartitionEntry

cfg2StoragePartitionEntry 1.3.6.1.4.1.2001.1.1.1.1.11.6.1.1.1
storage partition entry
Status: optional Access: not-accessible
OBJECT-TYPE    
  Cfg2StoragePartitionEntry  

cfg2StoragePartitionIndex 1.3.6.1.4.1.2001.1.1.1.1.11.6.1.1.1.1
storage partition index
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cfg2StoragePartitionFree 1.3.6.1.4.1.2001.1.1.1.1.11.6.1.1.1.2
storage partition free size
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

usagePrinterUnitTable 1.3.6.1.4.1.2001.1.1.1.1.100.1.1
usage PrinterUnit table
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsagePrinterUnitEntry

usagePrinterUnitEntry 1.3.6.1.4.1.2001.1.1.1.1.100.1.1.1
usage PrinterUnit entry
Status: optional Access: not-accessible
OBJECT-TYPE    
  UsagePrinterUnitEntry  

usagePrinterUnitIndex 1.3.6.1.4.1.2001.1.1.1.1.100.1.1.1.1
usage PrinterUnit index
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

usagePrinterUnitCounter 1.3.6.1.4.1.2001.1.1.1.1.100.1.1.1.3
usage PrinterUnit Counter
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usagePrinterUnitCounterLife 1.3.6.1.4.1.2001.1.1.1.1.100.1.1.1.4
usage PrinterUnit Counter Life
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageTrayTable 1.3.6.1.4.1.2001.1.1.1.1.100.2.1
usage Tray table
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsageTrayEntry

usageTrayEntry 1.3.6.1.4.1.2001.1.1.1.1.100.2.1.1
usage Tray entry
Status: optional Access: not-accessible
OBJECT-TYPE    
  UsageTrayEntry  

usageTrayIndex 1.3.6.1.4.1.2001.1.1.1.1.100.2.1.1.1
usage Tray index
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

usageTrayMaxLevel 1.3.6.1.4.1.2001.1.1.1.1.100.2.1.1.4
usage Tray Max Level
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageTrayCounter 1.3.6.1.4.1.2001.1.1.1.1.100.2.1.1.7
usage Tray Counter
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageTonerTable 1.3.6.1.4.1.2001.1.1.1.1.100.3.1
usage Toner table
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsageTonerEntry

usageTonerEntry 1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1
usage Toner entry
Status: optional Access: not-accessible
OBJECT-TYPE    
  UsageTonerEntry  

usageTonerIndex 1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.1
usage Toner index
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

usageTonerDescription 1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.2
usage Toner Description
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageTonerCurrentLevel 1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.3
usage Toner Current Level
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageTonerMaxLevel 1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.4
usage Toner Max Level
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageTonerLevelUnit 1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.5
usage Toner Level Unit
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageDrumTable 1.3.6.1.4.1.2001.1.1.1.1.100.4.1
usage Drum table
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsageDrumEntry

usageDrumEntry 1.3.6.1.4.1.2001.1.1.1.1.100.4.1.1
usage Drum entry
Status: optional Access: not-accessible
OBJECT-TYPE    
  UsageDrumEntry  

usageDrumIndex 1.3.6.1.4.1.2001.1.1.1.1.100.4.1.1.1
usage Drum index
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

usageDrumCurrentLevel 1.3.6.1.4.1.2001.1.1.1.1.100.4.1.1.3
usage Drum Current Level
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageDrumMaxLevel 1.3.6.1.4.1.2001.1.1.1.1.100.4.1.1.4
usage Drum Max Level
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageBeltTable 1.3.6.1.4.1.2001.1.1.1.1.100.5.1
usage Belt table
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsageBeltEntry

usageBeltEntry 1.3.6.1.4.1.2001.1.1.1.1.100.5.1.1
usage Belt entry
Status: optional Access: not-accessible
OBJECT-TYPE    
  UsageBeltEntry  

usageBeltIndex 1.3.6.1.4.1.2001.1.1.1.1.100.5.1.1.1
usage Belt index
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

usageBeltCurrentLevel 1.3.6.1.4.1.2001.1.1.1.1.100.5.1.1.3
usage Belt Current Level
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageBeltMaxLevel 1.3.6.1.4.1.2001.1.1.1.1.100.5.1.1.4
usage Belt Max Level
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageFuserTable 1.3.6.1.4.1.2001.1.1.1.1.100.6.1
usage Fuser table
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsageFuserEntry

usageFuserEntry 1.3.6.1.4.1.2001.1.1.1.1.100.6.1.1
usage Fuser entry
Status: optional Access: not-accessible
OBJECT-TYPE    
  UsageFuserEntry  

usageFuserIndex 1.3.6.1.4.1.2001.1.1.1.1.100.6.1.1.1
usage Fuser index
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

usageFuserCurrentLevel 1.3.6.1.4.1.2001.1.1.1.1.100.6.1.1.3
usage Fuser Current Level
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

usageFuserMaxLevel 1.3.6.1.4.1.2001.1.1.1.1.100.6.1.1.4
usage Fuser Max Level
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

psVendorId 1.3.6.1.4.1.2001.1.2.100.1
The vendor ID branch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

psMibVersion 1.3.6.1.4.1.2001.1.2.100.3
A textual description of the MIB Version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..9)  

genGroupVersion 1.3.6.1.4.1.2001.1.2.683.1.1
The version for the general group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genMIBVersion 1.3.6.1.4.1.2001.1.2.683.1.2
The version of the MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genProductName 1.3.6.1.4.1.2001.1.2.683.1.3
A textual description of the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..22)  

genProductNumber 1.3.6.1.4.1.2001.1.2.683.1.4
The product number of the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..5)  

genSerialNumber 1.3.6.1.4.1.2001.1.2.683.1.5
The serial number of the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

genHWAddress 1.3.6.1.4.1.2001.1.2.683.1.6
The device's hardware address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

genCableType 1.3.6.1.4.1.2001.1.2.683.1.7
Indicates the network cable type connected to the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenbase2(1), tenbaseT(2), aui(3), utp(4), stp(5), fiber100fx(6)  

genDateCode 1.3.6.1.4.1.2001.1.2.683.1.8
The device's datecode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

genVersion 1.3.6.1.4.1.2001.1.2.683.1.9
A string indicating the version of the firmware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

genConfigurationDirty 1.3.6.1.4.1.2001.1.2.683.1.10
A variable's value has been changed which will require that the device be reset or power cycled before it will take effect. Set cmdReset to take this action. A list of critical variables that will cause genConfigurationDirty to be set follows: snmpGetCommunityName, snmpSetCommunityName, trPriority, trEarlyTokenRelease, trPacketSize, trRouting, trLocallyAdminAddr, psJetAdminEnabled, outputType, outputHandshake, tcpipEnabled, tcpipIPAddress, tcpipDefaultGateway, tcpipSubnetMask, tcpipUsingNetProtocols, tcpipBootProtocolsEnabled, tcpipRawPortNumber, tcpipMLPTCPPort, tcpipMLPPort, nwEnabled, nwSetFrameFormat, nwMode, nwPrintServerName, nwPrintServerPassword, nwQueueScanTime, nwFileServerName, nwPortPrinterNumber, nwPortFontDownload, nwPortPCLQueue, nwPortPSQueue, nwPortFormsOn, nwPortNotification, bvEnabled, bvSetSequencedRouting, bvLoginName, bvLoginPassword, bvPrintServiceName, bvPrintServiceRouting, lmEnabled, eTalkEnabled
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

genCompanyName 1.3.6.1.4.1.2001.1.2.683.1.11
A string indicating the manufacturer of the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

genCompanyLoc 1.3.6.1.4.1.2001.1.2.683.1.12
A string indicating the location of the manufacturer of the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..50)  

genCompanyPhone 1.3.6.1.4.1.2001.1.2.683.1.13
A string indicating the phone number of the manufacturer of the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

genCompanyTechSupport 1.3.6.1.4.1.2001.1.2.683.1.14
A string indicating the technical support information for the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

genNumProtocols 1.3.6.1.4.1.2001.1.2.683.1.15.1
The number of network protocols supported on the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genProtocolTable 1.3.6.1.4.1.2001.1.2.683.1.15.2
A list of network protocols. The number of entries is given by the value of genNumProtocols.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenProtocolEntry

genProtocolEntry 1.3.6.1.4.1.2001.1.2.683.1.15.2.1
A network protocol supported on the device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenProtocolEntry  

genProtocolIndex 1.3.6.1.4.1.2001.1.2.683.1.15.2.1.1
A unique value for each network protocol. Its value ranges between 1 and the value of genNumProtocols. The value for each protocol must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genProtocolDescr 1.3.6.1.4.1.2001.1.2.683.1.15.2.1.2
A textual string describing the network protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

genProtocolID 1.3.6.1.4.1.2001.1.2.683.1.15.2.1.3
A unique identification number for the network protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcp-ip(1), netware(2), vines(3), lanmanger(4), ethertalk(5)  

genSysUpTimeString 1.3.6.1.4.1.2001.1.2.683.1.16
A string indicating the system up time for the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..35)  

cmdGroupVersion 1.3.6.1.4.1.2001.1.2.683.2.1
The version for the commands group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cmdReset 1.3.6.1.4.1.2001.1.2.683.2.2
A value of 2 will reset the device. The following list of variables will also cause the device to reset itself. cmdRestoreDefaults, snmpRestoreDefaults, trRestoreDefaults, outputRestoreDefaults, tcpipRestoreDefaults, tcpipFirmwareUpgrade, nwRestoreDefaults, nwFirmwareUpgrade, bvRestoreDefaults, bvFirmwareUpgrade, eTalkRestoreDefaults
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cmdPrintConfig 1.3.6.1.4.1.2001.1.2.683.2.3
A value of 2 will cause the device to print a configuration page.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cmdRestoreDefaults 1.3.6.1.4.1.2001.1.2.683.2.4
A value of 2 will restore all parameters on the device to factory defaults, as well as reset the device.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

snmpGroupVersion 1.3.6.1.4.1.2001.1.2.683.3.1
The version for the snmp group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snmpRestoreDefaults 1.3.6.1.4.1.2001.1.2.683.3.2.1
A value of 2 will restore all SNMP parameters on the device to factory defaults, as well as reset the device.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

snmpGetCommunityName 1.3.6.1.4.1.2001.1.2.683.3.3
Get community name for the managed node. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

snmpSetCommunityName 1.3.6.1.4.1.2001.1.2.683.3.4
Set community name for the managed node. This value cannot be read, just set. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

snmpTrapCommunityName 1.3.6.1.4.1.2001.1.2.683.3.5
Trap community name for the managed node.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

snmpPrinterTrapMaskUsed 1.3.6.1.4.1.2001.1.2.683.3.6.1
A bit mask showing which bits in the printer trap mask are valid.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

snmpPrinter2TrapMaskUsed 1.3.6.1.4.1.2001.1.2.683.3.6.2
A bit mask showing which bits in the printer2 trap mask are valid.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

snmpTrapMaskTable 1.3.6.1.4.1.2001.1.2.683.3.6.3
A list of strings which show how each bit in the printer2 trap mask is used.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SNMPTrapEntry

snmpTrapEntry 1.3.6.1.4.1.2001.1.2.683.3.6.3.1
A physical output port on the print server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SNMPTrapEntry  

snmpTrapMaskIndex 1.3.6.1.4.1.2001.1.2.683.3.6.3.1.1
A unique value for each bit in the SNMPTrapMask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snmpTrapMaskString 1.3.6.1.4.1.2001.1.2.683.3.6.3.1.2
String describing how the bit in the SNMPTrapMask is used.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(30)  

driverGroupVersion 1.3.6.1.4.1.2001.1.2.683.4.1
The version for the driver group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

driverRXPackets 1.3.6.1.4.1.2001.1.2.683.4.2
The number of packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

driverTXPackets 1.3.6.1.4.1.2001.1.2.683.4.3
The number of packets transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

driverRXPacketsUnavailable 1.3.6.1.4.1.2001.1.2.683.4.4
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol due to a lack of buffer space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

driverRXPacketErrors 1.3.6.1.4.1.2001.1.2.683.4.5
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

driverTXPacketErrors 1.3.6.1.4.1.2001.1.2.683.4.6
The number of outbound packets that could not be transmitted because of errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

driverTXPacketRetries 1.3.6.1.4.1.2001.1.2.683.4.7
The number of retransmitted packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

driverChecksumErrors 1.3.6.1.4.1.2001.1.2.683.4.8
The number of packets containing checksum errors received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trGroupVersion 1.3.6.1.4.1.2001.1.2.683.5.1
The version for the tokenRing group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trRestoreDefaults 1.3.6.1.4.1.2001.1.2.683.5.2.1
A value of 2 will restore all token-ring parameters on the device to factory defaults, as well as reset the device.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

trPriority 1.3.6.1.4.1.2001.1.2.683.5.3.1
The token which is passed around the ring until a station needs it can be assigned a priority from 0 to 6. Priority 0 is the lowest and 6 is the highest. The priority of the device can be increased to improve performance. However, the performance of file servers and crucial stations could be affected. In order for changes to this variable to take effect, the device must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 0..6  

trEarlyTokenRelease 1.3.6.1.4.1.2001.1.2.683.5.3.2
Early token release allows the device to release the token immediately after transmitting data but only on 16 Mbps systems. This feature enhances ring performance. In order for changes to this variable to take effect, the device must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

trPacketSize 1.3.6.1.4.1.2001.1.2.683.5.3.3
You should only change the packet size if you are using a driver for your Token Ring adapter which allows packet sizes greater than One-K. In order for changes to this variable to take effect, the device must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER one-k(1), two-k(2), four-k(3)  

trRouting 1.3.6.1.4.1.2001.1.2.683.5.3.4
Set this variable to change the source routing configuration on the device. Off: No source routing. All, None: All-routes broadcast, nonbroadcast return. The frame will be transmitted on every route within the network resulting in multiple copies on a given ring. Single, All: Single-route broadcast, all routes broadcast return. The frame will be transmitted across the designated bridges, which will result in the frame appearing only once on each ring. The response frame is on all routes broadcast to the originator. Single, None: Single-route broadcast, nonbroadcast return. The frame will be transmitted across designated bridges, which will result in the frame appearing only once each ring. In order for changes to this variable to take effect, the device must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER off(1), all-None(2), single-All(3), single-None(4)  

trLocallyAdminAddr 1.3.6.1.4.1.2001.1.2.683.5.3.5
This is the locally administered node address for the device. Valid values are 000000000000 and between 400000000000 and 7FFFFFFFFFFF. A value of 000000000000 indicates that a locally administered address is not in use.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

psGroupVersion 1.3.6.1.4.1.2001.1.2.683.6.1.1
The version for the psGeneral group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

psJetAdminEnabled 1.3.6.1.4.1.2001.1.2.683.6.1.2
Indicates whether or not the JetAdmin support is enabled on the print server. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

psVerifyConfiguration 1.3.6.1.4.1.2001.1.2.683.6.1.3
This variable is used to force the print server to verify valid configuration settings. Setting the variable to the appropriate enumeration will cause the print server to verify the settings for that enumeration. If the settings are valid, the result of the set will be OK. If the settings are not valid, the result will be BadValue. Gets on this variable will always return 0. 1 - Indicates whether or not the current serial configuration is valid. Valid configurations - If the serial port is set in bidirectional mode, the baud rate must be less than 115200 and the handshaking must be set to hardware handshaking. 2 - Not used yet.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER getvalue(0), serial-configuration(1)  

outputGroupVersion 1.3.6.1.4.1.2001.1.2.683.6.2.1
The version for the output group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outputRestoreDefaults 1.3.6.1.4.1.2001.1.2.683.6.2.2.1
A value of 2 will restore all output parameters on the print server to factory defaults, as well as reset the print server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

outputCommandsTable 1.3.6.1.4.1.2001.1.2.683.6.2.2.2
A list of physical output ports. The number of entries is given by the value of outputNumPorts.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OutputCommandsEntry

outputCommandsEntry 1.3.6.1.4.1.2001.1.2.683.6.2.2.2.1
A physical output port on the print server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OutputCommandsEntry  

outputCancelCurrentJob 1.3.6.1.4.1.2001.1.2.683.6.2.2.2.1.1
A value of 2 will cancel the job currently printing on that port.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

outputNumPorts 1.3.6.1.4.1.2001.1.2.683.6.2.3.1
The number of physical output ports on the print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outputTable 1.3.6.1.4.1.2001.1.2.683.6.2.3.2
A list of physical output ports. The number of entries is given by the value of outputNumPorts.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OutputEntry

outputEntry 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1
A physical output port on the print server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OutputEntry  

outputIndex 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.1
A unique value for each physical output port. Its value ranges between 1 and the value of outputNumPorts. The value for each protocol must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outputName 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.2
A textual description of the output port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

outputStatusString 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.3
A string indicating the status of the physical output port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

outputStatus 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.4
Indicates status of the printer. Get outputExtendedStatus for further information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on-Line(1), off-Line(2)  

outputExtendedStatus 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.5
Indicates printer status to be used in conjunction with outputStatus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), no-Printer-Attached(2), toner-Low(3), paper-Out(4), paper-Jam(5), door-Open(6), printer-Error(15)  

outputPrinter 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.6
The type of printer the output port is attached to. Even if the group is supported, this variable may not be supported.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER okidata(2), no-Specific-Printer(4)  

outputLanguageSwitching 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.7
Indicates the language switching option for the physical port. Even if the group is supported, this variable may not be supported.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER off(1), pcl(2), postScript(3), als(4)  

outputConfigLanguage 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.8
Indicates the language that configuration pages will be printed in. If set to off, a config sheet will not be printed on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER text(1), pcl(2), postScript(3), off(4)  

outputPCLString 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.9
This string will be sent out the physical port if (1) outputLanguageSwitching is set to PCL or outputLanguageSwitching is set to Auto and the job is determined to be PCL, and (2) outputPrinter is set to No-Specific-Printer. Even if the group is supported, this variable may not be supported.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(127)  

outputPSString 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.10
This string will be sent out the physical port if (1) outputLanguageSwitching is set to PostScript or outputLanguageSwitching is set to Auto and the job is determined to be PostScript, and (2) outputPrinter is set to No-Specific-Printer. Even if the group is supported, this variable may not be supported.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(127)  

outputSetting 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.12
Indicates the type (and optionally speed) for the physical output port. Setting this variable to physical connections (such as Parallel) will result in an error. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER serial-infrared(32758), serial-bidirectional(32759), serial-unidirectional(32760), serial-input(32761), parallel-compatibility-no-bidi(32762), ieee-1284-std-nibble-mode(32763), z-Link(32764), internal(32765), ieee-1284-ecp-or-fast-nibble-mode(32766), extendedLink(32767)  

outputOwner 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.13
Indicates which protocol or task currently is printing on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-Owner(1), tcpip(2), netware(3), vines(4), lanManager(5), etherTalk(6), config-Page(7)  

outputBIDIStatusEnabled 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.14
A value of 2 indicates that the BIDI status system is enabled.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

outputPrinterModel 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.15
A string indicating the printer model attached to the output port.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..60)  

outputPrinterDisplay 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.16
A string indicating the message on the attached printer front panel.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

outputCapabilities 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.17
This field is implemented as a BIT mask. If the bit is set then the port is capable of functioning in this mode. Bit Property --- ------------------------ 0 Serial Unidirectional Baud 9600 1 Serial Unidirectional Baud 19200 2 Serial Unidirectional Baud 38400 3 Serial Unidirectional Baud 57600 4 Serial Unidirectional Baud 115200 5 Serial Bidirectional Baud 9600 6 Serial Bidirectional Baud 19200 7 Serial Bidirectional Baud 38400 8 Serial Bidirectional Baud 57600 19 Infrared Input on serial port 20 Serial Input 21 Serial Configuration Settings 22 Parallel Compatibility Mode (no bidi) 23 IEEE 1284 Standard Nibble Mode 25 Bidirectional Support (PJL status) 26 Serial Software Handshaking 27 Serial Output 29 Printer Internal (MIO) 30 IEEE 1284 ECP or Fast Nibble Mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER serial-Uni-Baud-9600(1), serial-Uni-Baud-19200(2), serial-Uni-Baud-38400(4), serial-Uni-Baud-57600(8), serial-Uni-Baud-115200(16), serial-bidi-Baud-9600(32), serial-bidi-Baud-19200(64), serial-bidi-Baud-38400(128), serial-bidi-Baud-57600(256), serial-irin(524288), serial-in(1048576), serial-config-settings(2097152), parallel-compatibility-no-bidi(4194304), ieee-1284-std-nibble-mode(8388608), bidirectional(33554432), serial-Software-Handshake(67108864), serial-Output(134217728), internal(536870912), ieee-1284-ecp-or-fast-nibble-mode(1073741824)  

outputHandshake 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.18
If the port in serial mode operation this indicates the handshaking method being used. Setting this value to 'not- supported' will result in an error. Setting this value on non serial capable ports will result in an error. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER not-Supported(1), hardware-Software(2), hardware(3), software(4)  

outputProtocolManager 1.3.6.1.4.1.2001.1.2.683.6.2.3.2.1.23
Indicates the type of output protocol manager being used on the port. Protocol-none means either there is no printer attached or the print server has not yet determined which output managers are supported on the printer. Protocol-compatibility means the printer does not support any of the protocol managers supported by the print server. Protocol-1284-4 means the output is using the 1284.4 logical port protocol manager.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER protocol-none(0), protocol-compatibility(1), protocol-1284-4(2)  

outputDisplayMask 1.3.6.1.4.1.2001.1.2.683.6.2.4
Bit mask describing what should be displayed by the utilities bit Description --- ----------- 0 outputCancelCurrentJob (Includes all CancelCurrentJob info) 1 outputName 2 outputStatusString 3 outputStatus 4 outputExtendedStatus 5 outputPrinter 6 outputLanguageSwitching 7 outputConfigLanguage 8 outputString (Includes outputPCLString and outputPSString) 9 outputCascaded 10 outputSetting 11 outputOwner 12 outputBIDIStatusEnabled 13 outputPrinterModel 14 outputPrinterDisplay 15 outputHandshake 16 outputJobLog (includes all job logging) 17 outputSerialConfig 18 NoPrinterType1 19 NoPrinterType2 20 NoPrinterType3 21 NoPrinterType4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outputAvailableTrapsMask 1.3.6.1.4.1.2001.1.2.683.6.2.5
Bit mask describing what output printer traps are available bit Description --- ----------- 0 online 1 offline 2 printer attached 3 toner low 4 paper out 5 paper jam 6 door open 7 printer error
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outputNumLogEntries 1.3.6.1.4.1.2001.1.2.683.6.2.6.1
The number of job log entries per output port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outputJobLogTable 1.3.6.1.4.1.2001.1.2.683.6.2.6.2
A 2 dimensional list of Job log entries indexed by the output port number and the log entry index (1 through outputNumJobLogEntries). The number of entries per output port is given by the value of outputNumJobLogEntries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OutputJobLogEntry

outputJobLogEntry 1.3.6.1.4.1.2001.1.2.683.6.2.6.2.1
A Job log entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OutputJobLogEntry  

outputJobLogInformation 1.3.6.1.4.1.2001.1.2.683.6.2.6.2.1.1
A textual description of print job information. The protocol, source, and file size are always included. Other information such as File Server, Queue, File Name, etc will be included if available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..100)  

outputJobLogTime 1.3.6.1.4.1.2001.1.2.683.6.2.6.2.1.2
A string indicating the elasped time since the last job was printed. Reported in form X hours X minutes X seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..50)  

outputTotalJobTable 1.3.6.1.4.1.2001.1.2.683.6.2.6.3
Table showing the total number of jobs printed for each port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OutputTotalJobEntry

outputTotalJobEntry 1.3.6.1.4.1.2001.1.2.683.6.2.6.3.1
An entry in the outputTotalJobTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OutputTotalJobEntry  

outputTotalJobIndex 1.3.6.1.4.1.2001.1.2.683.6.2.6.3.1.1
A unique value for entry in the outputTotalJobTable. Its value ranges between 1 and the value of numPorts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outputTotalJobsLogged 1.3.6.1.4.1.2001.1.2.683.6.2.6.3.1.2
The total number of jobs printed by the port since the print server was powered on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipGroupVersion 1.3.6.1.4.1.2001.1.2.683.6.3.1.1
The version for the tcpip group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipEnabled 1.3.6.1.4.1.2001.1.2.683.6.3.1.2
Indicates whether or not the tcpip protocol stack is enabled on the print server. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tcpipRestoreDefaults 1.3.6.1.4.1.2001.1.2.683.6.3.1.3.1
A value of 2 will restore all tcpip parameters on the print server to factory defaults, as well as reset the print server.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tcpipFirmwareUpgrade 1.3.6.1.4.1.2001.1.2.683.6.3.1.3.2
A value of 2 will put the print server into firmware upgrade mode waiting to receive a firmware upgrade file via tftp.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tcpipIPAddress 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.1
The Internet Address. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpipDefaultGateway 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.2
The default gateway for the print server. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpipSubnetMask 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.3
The subnet mask for the print server. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpipUsingNetProtocols 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.4
A value of 2 indicates that the print server is using a combination of RARP, BOOTP, default IP address, or gleaning to determine its IP address. See tcpipBootProtocolsEnabled to determine which boot protocols are enabled. If the value of tcpipUsingNetProtocols is 1, the IP address is stored permanently in flash memory. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tcpipBootProtocolsEnabled 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.5
This is the 16 bit mask which determines which boot protocols will be used to determine the print server's IP address. BIT Boot Protocol Enabled --- -------------------------- 0 RARP 1 BootP 2 DHCP 3 Gleaning 4 Default Address Enabled (If no address after 2 minutes timeout and go to 198.102.102.254) A value of 31 indicates that all boot protocols are enabled. These protocols will only be used if tcpipUsingNetProtocols is set to 2. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipIPAddressSource 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.6
This variable indicates how the IP address for the print server was determined.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER permanent(1), default(2), rarp(3), bootp(4), dhcp(5), glean(6)  

tcpipIPAddressServerAddress 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.7
This variable indicates the source of the IP address if a boot protocol was used. This value will be 0.0.0.0 if no boot server was used.
Status: optional Access: read-only
OBJECT-TYPE    
  IpAddress  

tcpipTimeoutChecking 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.8
A value of 2 indicates that a packet timeout will be active on all tcp connections. If a packet has not been received from the connection within this timeout the connection will be reset. To set this timeout, see tcpipTimeoutCheckingValue
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tcpipNumTraps 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.9
The number of UDP trap destinations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipTrapTable 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.10
A list of UDP trap definitions. The number of entries is given by the value of tcpipNumTraps.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TcpipTrapEntry

tcpipTrapEntry 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.10.1
An entry in the tcpipTrapTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TcpipTrapEntry  

tcpipTrapIndex 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.10.1.1
A unique value for entry in the tcpipTrapTable. Its value ranges between 1 and the value of tcpipNumTraps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipTrapDestination 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.10.1.2
This is the IP address that traps are sent to. A value of 0.0.0.0 will disable traps over UDP.
Status: optional Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpipPrinter2TrapMask 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.10.1.3
This is the 16 bit mask which determines which protocol specific traps will be sent out via UDP. Currently no protocol specific traps are supported.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipPrinterTrapMask 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.10.1.4
This is the 16 bit mask which determines which printer specific traps will be sent out via UDP. A value of 65535 indicates that all printer specific traps should be reported via UDP. BIT CONDITION --- -------------------------- 0 On-line (Condition cleared) 1 Off-line 2 No printer attached 3 Toner Low 4 Paper Out 5 Paper Jam 6 Door Open 15 Printer Error
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipOutputTrapMask 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.10.1.5
This is the 16 bit mask which determines which physical output ports will be checked when generating printer specific traps to be sent out via UDP. A value of 65535 indicates that all physical output ports will generate traps. BIT CONDITION --- -------------------------- 0 Port 1 1 Port 2 2 Port 3 3 Port 4 ... ...
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipBanners 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.11
A value of 2 indicates that banners will be printed with tcpip jobs. Even if the group is supported, this variable may not be supported.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tcpipWinsAddress 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.12
The IP address of the WINS server. The print server will register its sysName to this WINS server.
Status: optional Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpipWinsAddressSource 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.13
The source of the WINS server address. If set to dhcp, the print server will use the WINS address supplied with dhcp. If it is set to permanent, it will use the WINS address stored in flash.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER dhcp(1), permanent(2)  

tcpipConfigPassword 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.14
The print server html/telnet configuration password. This value cannot be read, just set.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(5..24)  

tcpipTimeoutCheckingValue 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.15
The TCP connection timeout in seconds. A value of 0 has the same effect as disabling timeout checking.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

tcpipArpInterval 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.16
The ARP interval in minutes. The print server will ARP itself once when this timer expires. Set to 0 to disable.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 0..30  

tcpipRawPortNumber 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.17
The raw TCP port number the print server will listen for print jobs on. On multiple port devices, additional ports will sequentially follow this port number. The default port is 9100. Setting this value to a TCP port that is in use by another TCP application will return an error. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipNumSecurity 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.18
The number of secure IP address ranges.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipSecurityTable 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.19
A list of secure IP address ranges. This adds security for both printing and admin rights. AdminEnabled: When the admin enabled field is set to yes for a secure address range, the print server may only be configured via IP from IP address within that range. If the admin field is not set for any address ranges, the print server will accept admin commands from any IP address which has the valid community names and/or passwords. PortMask: When there is a port mask set for a secure IP address range, the print server will only accept TCP/IP print jobs from hosts that are in the secure address range. If there are no ranges with a port mask set, the print server will accept TCP/IP print jobs from any host. The number of entries is given by the value of tcpipNumSecurity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TcpipSecurityEntry

tcpipSecurityEntry 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.19.1
An entry in the tcpipSecurityTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TcpipSecurityEntry  

tcpipSecurityIndex 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.19.1.1
A unique value for entry in the tcpipSecurityTable. Its value ranges between 1 and the value of tcpipNumSecurity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipSecureStartIPAddress 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.19.1.2
This is the starting IP address for the secure IP address range. A value of 0.0.0.0 for both tcpipStartIPAddress and tcpipEndIPAddress will disable the address range.
Status: optional Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpipSecureEndIPAddress 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.19.1.3
This is the ending IP address for the secure IP address range. A value of 0.0.0.0 for both tcpipStartIPAddress and tcpipEndIPAddress will disable the address range.
Status: optional Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpipSecurePrinterMask 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.19.1.4
This is the 8 bit mask which determines which physical output ports this range of IP addresses can print to. A value of 127 indicates that the range of IP addresses can print to any of the output ports. This value can not be configured until a valid start and end address range have been configured. BIT CONDITION --- -------------------------- 0 Port 1 1 Port 2 2 Port 3 3 Port 4 ... ... 8 Reserved, must be set to 0.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipSecureAdminEnabled 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.19.1.5
This allows an advanced level of admin security for IP. Setting this will restrict which IP addresses can configure the print server. The correct community names and passwords are still required if this is used, it just adds another level of security. Indicates whether or not admin rights are enabled for this range of IP addresses. If no range of addresses has this enabled, then any IP address can configure the print server if it has the correct community names and/or passwords. If this field is set to yes for any range of addresses, the print server will only be configurable via IP from that range of addresses. This value can not be configured until a valid start and end address range have been configured.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tcpipLowBandwidth 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.20
A value of 2 will optimize the TCP stack for low bandwidth networks. A value of 1 will optimize the TCP stack for high bandwidth networks.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tcpipNumLogicalPrinters 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.21
The number of available logical printers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipMLPTable 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.22
A table of the available logical printers. The number of entries is given by the value of tcpipNumLogicalPrinters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TcpipMLPEntry

tcpipMLPEntry 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.22.1
An entry in the tcpipMLPTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TcpipMLPEntry  

tcpipMLPIndex 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.22.1.1
A unique value for entry in the tcpipMLPTable. Its value ranges between 1 and the value of tcpipNumLogicalPrinters.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipMLPName 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.22.1.2
Contains the name of the logical printer. This name is also the LPR remote queue name associated with the logical printer.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

tcpipMLPPort 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.22.1.3
The number of the physical output port associated with the logical printer. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipMLPTCPPort 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.22.1.4
The TCP port associated with the logical printer. Any print data sent to this TCP port will be processed through this logical printer entry. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipMLPPreString 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.22.1.5
This contains any data that should be sent down to the printer at the beginning of jobs sent to this logical printer. To enter non-printable ascii characters in the string, enclose the decimal value inside of <>. For example, to enter an ESC-E the string would be '<27>E'.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

tcpipMLPPostString 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.22.1.6
This contains any data that should be sent down to the printer at the end of jobs sent to this logical printer. To enter non-printable ascii characters in the string, enclose the decimal value inside of <>. For example, to enter an ESC-E the string would be '<27>E'.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

tcpipMLPDeleteBytes 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.22.1.7
The number of bytes that will be deleted from the beginning of jobs sent to this logical printer.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipSmtpServerAddr 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.23
The IP address of the e-mail server which will be used to send e-mail notification of printer status conditions. This address must contain the valid IP address of an e-mail server before any of the contents of the SmtpTable are used.
Status: optional Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpipNumSmtpDestinations 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.24
The number of configurable e-mail destinations to receive printer status conditions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipSmtpTable 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.25
A list of SMTP e-mail addresses and printer status conditions to send e-mails for. The number of entries is given by the value of tcpipNumSmtpDestinations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TcpipSmtpEntry

tcpipSmtpEntry 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.25.1
An entry in the tcpipSmtpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TcpipSmtpEntry  

tcpipSmtpIndex 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.25.1.1
A unique value for entry in the tcpipSmtpTable. Its value ranges between 1 and the value of tcpipNumSmtpDestinations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipSmtpEmailAddr 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.25.1.2
This is the e-mail address that printer status conditions are sent to. If this string is empty the status conditions will not be sent.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(64)  

tcpipSmtpProtocolMask 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.25.1.3
This is the 16 bit mask which determines which protocol specific conditions will be sent out via e-mail. Currently no protocol specific conditions are supported.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipSmtpPrinterMask 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.25.1.4
This is the 16 bit mask which determines which printer specific conditions will be sent out via e-mail. A value of 65535 indicates that all printer specific conditions should be reported via e-mail. BIT CONDITION --- -------------------------- 0 On-line (Condition cleared) 1 Off-line 2 No printer attached 3 Toner Low 4 Paper Out 5 Paper Jam 6 Door Open 15 Printer Error
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipSmtpOutputMask 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.25.1.5
This is the 16 bit mask which determines which physical output ports will be checked when generating printer specific conditions to be sent out via e-mail. A value of 65535 indicates that all physical output ports will generate e-mails upon a change in status. BIT CONDITION --- -------------------------- 0 Port 1 1 Port 2 2 Port 3 3 Port 4 ... ...
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipWebAdminName 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.26
This is the admin name used by web configuration for login.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(25)  

tcpipWebAdminPassword 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.27
This is the admin password used by web configuration for login.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(25)  

tcpipWebUserName 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.28
This is the user name used by web configuration for login. Not currently used.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(25)  

tcpipWebUserPassword 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.29
This is the user password used by web configuration for login. Not currently used.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(25)  

tcpipWebHtttpPort 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.30
The port number used to communicate over http. Must be between 0 and 65535. It must not be the same as any other port used. Other ports used are 20, 21, 23, 515, & raw port numbers (9100, 9101, ... if at default)
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipWebFaqURL 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.31
This is the URL for FAQ at the ESI (or other OEM) website.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(64)  

tcpipWebUpdateURL 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.32
This is the URL for finding firmware updates at the ESI (or other OEM) website.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(64)  

tcpipWebCustomLinkName 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.33
This is the name assigned to the custom link defined by the user.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(25)  

tcpipWebCustomLinkURL 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.34
This is the URL for a custom link specified by the user.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(64)  

tcpipPOP3ServerAddress 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.35
The IP address of the POP3 server from which email will be retrieved. This address must contain the valid IP address of a POP3 server before any attempts to retrieve email will be made.
Status: optional Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpipPOP3PollInterval 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.36
The number of seconds between attempts to retrieve mail from the POP3 server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpipPOP3UserName 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.37
This is the user name for the print server's email account on the POP3 server.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(64)  

tcpipPOP3Password 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.38
This is the password for the print server's email account on the POP3 server.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(20)  

tcpipDomainName 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.39
This is the Domain name used by POP3 and SMTP.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(64)  

tcpipCapabilities 1.3.6.1.4.1.2001.1.2.683.6.3.1.4.40
Bit mask describing TCPIP capabilities. If the BIT is set then the feature is supported. bit Description --- ----------- 0 LPR/LPD 1 Raw port printing 2 FTP 3 POP3 printing 4 Multiple logical printers 5 IPP 6 HTTP 7 HTTP Variables 8 Telnet 9 IP Security 10 Timeout checking 11 Fragmentation 12 Default IP address assignment 13 DHCP IP address assignment 14 BOOTP IP address assignment 15 RARP IP address assignment 16 Gleaning IP address assignment 17 IP Enterprise Traps 18 SMTP Traps 19 WINS 20 DDNS 21 Encryption1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tcpipError 1.3.6.1.4.1.2001.1.2.683.6.3.1.5.1
Contains any tcpip specific error information.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

tcpipDisplayMask 1.3.6.1.4.1.2001.1.2.683.6.3.1.6
Bit mask describing what should be displayed by the utilities bit Description --- ----------- 0 tcpipAddress (Includes tcpipDefaultGateway and tcpipSubnetMask) 1 tcpipUsingNetProtocols (Includes tcpipBootProtocolsEnabled, tcpipAddressSource, tcpipAddressServerAddress) 2 tcpipTimeoutChecking 3 tcpipTraps (Includes all trap info) 4 tcpipBanners 5 tcpipSecurity (Includes all security info) 6 tcpipWinsAddress (Includes tcpipWinsAddressSource) 7 tcpipConfigPassword 8 tcpipTimeoutCheckingValue 9 tcpipArpInterval 10 tcpipRawPortNumber 11 tcpipError 12 tcpipLowBandwidth 13 tcpipMLP (Includes all logical printer settings) 14 tcpipPOP3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwGroupVersion 1.3.6.1.4.1.2001.1.2.683.6.3.2.1
The version for the netware group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwEnabled 1.3.6.1.4.1.2001.1.2.683.6.3.2.2
Indicates whether or not the NetWare protocol stack is enabled on the print server. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nwRestoreDefaults 1.3.6.1.4.1.2001.1.2.683.6.3.2.3.1
A value of 2 will restore all NetWare parameters on the print server to factory defaults, as well as reset the print server.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nwFirmwareUpgrade 1.3.6.1.4.1.2001.1.2.683.6.3.2.3.2
A value of 2 will put the print server into firmware upgrade mode.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nwFrameFormat 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.1
Indicates the frame format that the print server is using. See nwSetFrameFormat to determine which frame frame format the print server is configured for.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ethernet-II(2), ethernet-802-3(3), ethernet-802-2(4), ethernet-Snap(5), token-Ring(6), token-Ring-Snap(7)  

nwSetFrameFormat 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.2
Indicates the frame format that the print server is using. Setting this value to 1 (Auto-Sense) indicates that automatic frame format sensing will be used. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER auto-Sense(1), forced-Ethernet-II(2), forced-Ethernet-802-3(3), forced-Ethernet-802-2(4), forced-Ethernet-Snap(5), forced-Token-Ring(6), forced-Token-Ring-Snap(7)  

nwMode 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.3
Mode the print server is running in. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), pserver(2), rprinter(3)  

nwPrintServerName 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.4
Contains print server name. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..47)  

nwPrintServerPassword 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.5
The print server password. This value cannot be read, just set. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..9)  

nwQueueScanTime 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.6
Determines how often, in tenths of a second that the print server will scan the queues for jobs. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nwNetworkNumber 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.7
The print server's network number.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

nwMaxFileServers 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.8
The print server maximum number of file servers which it can be attached to at once.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

nwFileServerTable 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.9
A table of file servers to service.
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwFileServerEntry

nwFileServerEntry 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.9.1
A file server for the print server to service.
Status: optional Access: not-accessible
OBJECT-TYPE    
  NwFileServerEntry  

nwFileServerIndex 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.9.1.1
A unique value for each file server. Its value ranges between 1 and the value of nwMaxFileServers. The value for each server must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. The first entry in the table is the default file server.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

nwFileServerName 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.9.1.2
The file server name. This name will be NULL if there is no file server to be serviced. Only the default file server (the first entry in the table) can be set. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..47)  

nwFileServerConnectionStatus 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.9.1.3
The value describes the status of the connection between the file server and the print server.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), startupInProgress(3), serverReattaching(4), serverNeverAttached(5), pse-UNKNOWN-FILE-SERVER(258), pse-NO-RESPONSE(261), pse-CANT-LOGIN(276), pse-NO-SUCH-QUEUE(512), pse-UNABLE-TO-ATTACH-TO-QUEUE(515), bad-CONNECTION(768), bad-SERVICE-CONNECTION(769), other(32767)  

nwPortTable 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10
A table of NetWare port specific information.
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwPortEntry

nwPortEntry 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1
An entry of NetWare port specific information.
Status: optional Access: not-accessible
OBJECT-TYPE    
  NwPortEntry  

nwPortIndex 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1.1
A unique value for each physical output port. Its value ranges between 1 and the value of outputNumPorts. The value for each port must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

nwPortStatus 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1.2
A string indicating the NetWare specific status of the physical output port.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

nwPortPrinterNumber 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1.3
Indicates the printer number for the print server to use when running in RPRinter mode. A value of 255 indicates that the port is unconfigured for RPRinter mode. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nwPortFontDownload 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1.4
This variable controls the font downloading feature of the print server. Disabled - Do not download fonts. Enabled, without Printer Sense - Only download fonts after the print server has been reset or power cycled. Enabled, with Printer Sense - Download fonts after the print server has been reset or power-cycled, or after the printer has been power-cycled. This option is only available on certain print servers. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled-No-Power-Sense(2), enabled-Power-Sense(3)  

nwPortPCLQueue 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1.5
A string indicating the name of the queue containing the PCL fonts to download when font downloading is enabled. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..47)  

nwPortPSQueue 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1.6
A string indicating the name of the queue containing the PS fonts to download when font downloading is enabled. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..47)  

nwPortFormsOn 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1.7
A value of 2 will enable forms checking. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nwPortFormNumber 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1.8
Indicates the form number to check jobs against when nwPortFormsOn is enabled.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nwPortNotification 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.10.1.9
A value of 2 will enable job notification.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nwNumTraps 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.11
The number of IPX trap destinations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwTrapTable 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.12
A list of IPX trap definitions. The number of entries is given by the value of nwNumTraps.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwTrapEntry

nwTrapEntry 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.12.1
An entry in the nwTrapTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwTrapEntry  

nwTrapIndex 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.12.1.1
A unique value for entry in the nwTrapTable. Its value ranges between 1 and the value of nwNumTraps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwTrapDestination 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.12.1.2
This is the network address that IPX traps are sent to. A value of 00 00 00 00 00 00 in conjunction with a nwTrapDestinationNet of 00 00 00 00 will disable traps over IPX.
Status: optional Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

nwTrapDestinationNet 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.12.1.3
This is the network number that IPX traps are sent to. A value of 00 00 00 00 in conjunction with a nwTrapDestination of 00 00 00 00 00 00 will disable traps over IPX.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

nwPrinter2TrapMask 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.12.1.4
This is the 16 bit mask which determines which protocol specific traps will be sent out via IPX. Currently no protocol specific traps are supported.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

nwPrinterTrapMask 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.12.1.5
This is the 16 bit mask which determines which printer specific traps will be sent out via IPX. A value of 65535 indicates that all printer specific traps should be reported via IPX. BIT CONDITION --- -------------------------- 0 On-line (Condition cleared) 1 Off-line 2 No printer attached 3 Toner Low 4 Paper Out 5 Paper Jam 6 Door Open 15 Printer Error
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

nwOutputTrapMask 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.12.1.6
This is the 16 bit mask which determines which physical output ports will be checked when generating printer specific traps to be sent out via IPX. A value of 65535 indicates that all physical output ports will generate traps. BIT CONDITION --- -------------------------- 0 Port 1 1 Port 2 2 Port 3 3 Port 4 ... ...
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNDSPrintServerName 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.13
Directory Services object used by the print server to connect to the NDS tree. This string contains the entire canonicalized name. NOTE: This variable must be stored in Unicode.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..512)  

nwNDSPreferredDSTree 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.14
Directory Services tree to which the NDS print server initially connects.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..47)  

nwNDSPreferredDSFileServer 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.15
The NetWare server to which the NDS print server initially makes a bindery connection.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..47)  

nwNDSPacketCheckSumEnabled 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.16
Compute the checksum for packets. 1 = disabled 2 = enabled
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNDSPacketSignatureLevel 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.17
Packet signature is a security method to prevent packet forging. 1 = disabled 2 = enabled 3 = preferred 4 = required
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAvailablePrintModes 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.18
Reports which NetWare print modes are available. BIT CONDITION --- -------------------------- 0 PServer 1 RPrinter 2 NDS 3 SPX Direct 4 JetAdmin
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

nwDirectPrintEnabled 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.19
Indicates whether or not direct mode ipx/spx printing is enabled.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nwJAConfig 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.20
Indicates whether or not JetAdmin was used to configure the netware settings.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nwDisableSAP 1.3.6.1.4.1.2001.1.2.683.6.3.2.4.21
Indicates whether or not SAPs are enabled.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nwError 1.3.6.1.4.1.2001.1.2.683.6.3.2.5.1
Contains any NetWare specific error information.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..160)  

nwDisplayMask 1.3.6.1.4.1.2001.1.2.683.6.3.2.6
Bit mask describing what should be displayed by the utilities bit Description --- ----------- 0 nwFrameFormat 1 nwJetAdmin 2 nwFileServer (Includes all file server info) 3 nwMode 4 nwPrintServerName 5 nwPrintServerPassword 6 nwQueueScanTime 7 nwNetworkNumber 8 nwPortStatus 9 nwPortPrinterNumber 10 nwPortFontDownload (Includes nwPortPCLQueue and nwPortPSQueue) 11 nwPortFormsOn (Includes nwPortFormsNumber) 12 nwPortNotification 13 nwTraps (Includes all trap info) 14 nwNDSPrintServerName 15 nwNDSPreferredDSTree 16 nwNDSPreferredDSFileServer 17 nwNDSPacketCheckSumEnabled 18 nwNDSPacketSignatureLevel 19 nwDirectPrintEnabled 20 nwError 21 nwSapDisable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bvGroupVersion 1.3.6.1.4.1.2001.1.2.683.6.3.3.1
The version for the vines group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bvEnabled 1.3.6.1.4.1.2001.1.2.683.6.3.3.2
Indicates whether or not the Banyan VINES protocol stack is enabled on the print server.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

bvRestoreDefaults 1.3.6.1.4.1.2001.1.2.683.6.3.3.3.1
A value of 2 will restore all VINES parameters on the print server to factory defaults, as well as reset the device.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

bvFirmwareUpgrade 1.3.6.1.4.1.2001.1.2.683.6.3.3.3.2
A value of 2 will put the print server into firmware upgrade mode.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

bvSetSequenceRouting 1.3.6.1.4.1.2001.1.2.683.6.3.3.3.3
Sets the VINES Routing selection. Automatic - Utilizes Sequenced Routing if available, otherwise uses Non-Sequenced Routing. Force-Sequenced - Will only use Sequenced Routing. Force-Non-Sequenced - Will only use Non-Sequenced Routing In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this. WARNING - Sequential Routing requires a VINES 5.5 or greater server on the same subnet.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER automatic-Routing(1), force-Sequenced-Routing(2), force-Non-Sequenced-Routing(3)  

bvDisableVPMan 1.3.6.1.4.1.2001.1.2.683.6.3.3.3.4
A value of 2 will disable VPMan access to the print server for one minute.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

bvLoginName 1.3.6.1.4.1.2001.1.2.683.6.3.3.4.1
The StreetTalk name the device will use to login with. This value will be OKIxxxxxxxx where xxxxxxx is the Serial number of the device if it is unconfigured. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(5..63)  

bvLoginPassword 1.3.6.1.4.1.2001.1.2.683.6.3.3.4.2
The password for the login name, bvLoginName. This value cannot be read, just set. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

bvNumberPrintServices 1.3.6.1.4.1.2001.1.2.683.6.3.3.4.3
The number of Print Services this device supports.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

bvPrintServiceTable 1.3.6.1.4.1.2001.1.2.683.6.3.3.4.4
Table of Print Services for this device.
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BvPrintServiceEntry

bvPrintServiceEntry 1.3.6.1.4.1.2001.1.2.683.6.3.3.4.4.1
Print Services Table entry.
Status: optional Access: not-accessible
OBJECT-TYPE    
  BvPrintServiceEntry  

bvPrintServiceIndex 1.3.6.1.4.1.2001.1.2.683.6.3.3.4.4.1.1
A unique value for each print service.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

bvPrintServiceName 1.3.6.1.4.1.2001.1.2.683.6.3.3.4.4.1.2
The StreetTalk Name for this Print Service. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

bvPrintServiceRouting 1.3.6.1.4.1.2001.1.2.683.6.3.3.4.4.1.3
The output port that the print service will print to. This value will range from 0 to the number of output ports, see outputNumPorts. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER  

bvPnicDescription 1.3.6.1.4.1.2001.1.2.683.6.3.3.4.5
Contains the VINES PNIC description.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

bvError 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.1
Contains any VINES specific error information.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

bvRouting 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.2
The current VINES Routing being used by the device.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER sequenced-Routing(1), non-Sequenced-Routing(2), unknown-Routing(32766), protocol-Disabled(32767)  

bvNumPrintServices 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.3
The number of Print Services this device supports.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

bvPrintServiceStatusTable 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4
Table of Print Service Status Entry's.
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BvPrintServiceStatusEntry

bvPrintServiceStatusEntry 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1
Print Service Status Entry.
Status: optional Access: not-accessible
OBJECT-TYPE    
  BvPrintServiceStatusEntry  

bvPSStatusIndex 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.1
A unique value for each status entry.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

bvPSName 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.2
The StreetTalk Name for this Print Service.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

bvPSStatus 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.3
Print Service Status.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

bvPSDestination 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.4
Port Destination for this print service.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

bvPrinterStatus 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.5
Printer status for this Print Service.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

bvJobActive 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.6
Whether there is a VINES job active for this print service.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

bvJobSource 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.7
The active print jobs source.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

bvJobTitle 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.8
The title of the active print job.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

bvJobSize 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.9
The size of the active print job.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..9)  

bvJobNumber 1.3.6.1.4.1.2001.1.2.683.6.3.3.5.4.1.10
The VINES job number of the active print job.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

lmGroupVersion 1.3.6.1.4.1.2001.1.2.683.6.3.4.1
The version for the lanManger group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lmEnabled 1.3.6.1.4.1.2001.1.2.683.6.3.4.2
Indicates whether or not the Lan Manager protocol stack is enabled on the print server. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

eTalkGroupVersion 1.3.6.1.4.1.2001.1.2.683.6.3.5.1
The version for the eTalk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

eTalkEnabled 1.3.6.1.4.1.2001.1.2.683.6.3.5.2
Indicates whether or not the EtherTalk protocol stack is enabled on the print server. In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

eTalkRestoreDefaults 1.3.6.1.4.1.2001.1.2.683.6.3.5.3.1
A value of 2 will restore all EtherTalk parameters on the print server to factory defaults, as well as reset the print server.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

eTalkNetwork 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.1
Indicates the EtherTalk network number that the print server is currently using.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

eTalkNode 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.2
Indicates the EtherTalk node number that the print server is currently using.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

eTalkNumPorts 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.3
Indicates the number of physical output ports that are EtherTalk compatible.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

eTalkPortTable 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4
A table of EtherTalk specific port configuration information.
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ETalkPortEntry

eTalkPortEntry 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4.1
An entry of EtherTalk port specific information.
Status: optional Access: not-accessible
OBJECT-TYPE    
  ETalkPortEntry  

eTalkPortIndex 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4.1.1
A unique value for each physical output port which is compatible with EtherTalk. Its value ranges between 1 and the value of eTalkNumPorts. The value for each port must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

eTalkPortEnable 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4.1.2
Indicates whether or not the physical output port is enabled to print via EtherTalk and will show up in the Chooser.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

eTalkName 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4.1.3
This is the EtherTalk name for the print server.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

eTalkActiveName 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4.1.4
This is the EtherTalk name for the print server that is currently being used.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

eTalkType1 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4.1.5
Indicates the first EtherTalk type. This type is mandatory.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

eTalkType2 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4.1.6
Indicates the second EtherTalk type. This type is optional. Setting this name to NULL will disable it.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eTalkZone 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4.1.7
Indicates the EtherTalk zone. This must be defined on the router.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

eTalkActiveZone 1.3.6.1.4.1.2001.1.2.683.6.3.5.4.4.1.8
Indicates the EtherTalk zone that is currently being used. This must be defined on the router.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

eTalkError 1.3.6.1.4.1.2001.1.2.683.6.3.5.5.1
Shows any errors for the EtherTalk protocol.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

trapPrinterOnline 1
The printer is on-line. This trap will be sent out after a printer error condition has been cleared.
TRAP-TYPE    

trapPrinterOffline 2
The printer is off-line.
TRAP-TYPE    

trapNoPrinterAttached 3
No printer is attached to the output port.
TRAP-TYPE    

trapPrinterTonerLow 4
The printer toner is low.
TRAP-TYPE    

trapPrinterPaperOut 5
The printer is out of paper.
TRAP-TYPE    

trapPrinterPaperJam 6
The printer has a paper jam.
TRAP-TYPE    

trapPrinterDoorOpen 7
The printer door is open.
TRAP-TYPE    

trapPrinterError 16
General printer error.
TRAP-TYPE