OG-STATUSv2-MIB

Imported modules

OG-SMI-MIB	SNMPv2-SMI	SNMPv2-CONF
SNMPv2-TC

Imported symbols

opengear	MODULE-IDENTITY	NOTIFICATION-TYPE
OBJECT-TYPE	Integer32	Unsigned32
Counter32	Counter64	MODULE-COMPLIANCE
NOTIFICATION-GROUP	OBJECT-GROUP	DateAndTime
DisplayString

Defined Types

SerialPortEntry
SEQUENCE
	ogSerialPortIndex	Integer32
	ogSerialPortLabel	DisplayString
	ogSerialPortSpeed	Integer32
	ogSerialPortDataBits	Integer32
	ogSerialPortParity	INTEGER
	ogSerialPortStopBits	INTEGER
	ogSerialPortFlowControl	INTEGER
	ogSerialPortMode	INTEGER
	ogSerialPortLogLevel	INTEGER
	ogSerialPortRxBytes	Counter64
	ogSerialPortTxBytes	Counter64
	ogSerialPortFramingErrors	Counter64
	ogSerialPortParityErrors	Counter64
	ogSerialPortOverrunErrors	Counter64
	ogSerialPortBreaks	Counter64
	ogSerialPortDCD	INTEGER
	ogSerialPortDTR	INTEGER
	ogSerialPortDSR	INTEGER
	ogSerialPortCTS	INTEGER
	ogSerialPortRTS	INTEGER

SerialUserEntry
SEQUENCE
	ogSerialUserIndex	Integer32
	ogSerialUserStartTime	DateAndTime
	ogSerialUserPort	Integer32
	ogSerialUserLabel	DisplayString
	ogSerialUserName	DisplayString

HostEntry
SEQUENCE
	ogHostIndex	Integer32
	ogHostName	DisplayString
	ogHostIpV4Address	DisplayString
	ogHostIpV6Address	DisplayString

HostServiceEntry
SEQUENCE
	ogHostServiceIndex	Integer32
	ogHostServiceHost	OBJECT IDENTIFIER
	ogHostServiceType	INTEGER
	ogHostServicePort	Unsigned32
	ogHostServiceStatus	INTEGER
	ogHostServiceCounter	Counter32

HostUserEntry
SEQUENCE
	ogHostUserIndex	Integer32
	ogHostUserHost	OBJECT IDENTIFIER
	ogHostUserStartTime	DateAndTime
	ogHostUserAddress	DisplayString
	ogHostUserHostName	DisplayString
	ogHostUserName	DisplayString

WebUserEntry
SEQUENCE
	ogWebUserIndex	Integer32
	ogWebUserStartTime	DateAndTime
	ogWebUserName	DisplayString
	ogWebUserSourceAddress	DisplayString
	ogWebUserSourcePort	Integer32

EmdEntry
SEQUENCE
	ogEmdIndex	Integer32
	ogEmdName	DisplayString
	ogEmdDescription	DisplayString
	ogEmdEnabled	INTEGER
	ogEmdLogEnabled	INTEGER
	ogEmdConnectType	INTEGER
	ogEmdTemperatureTotal	Counter32
	ogEmdHumidityTotal	Counter32
	ogEmdDioInputTotal	Counter32

EmdTemperatureEntry
SEQUENCE
	ogEmdTemperatureIndex	Integer32
	ogEmdTemperatureEmd	OBJECT IDENTIFIER
	ogEmdTemperatureName	DisplayString
	ogEmdTemperatureDescription	DisplayString
	ogEmdTemperatureValue	Integer32
	ogEmdTemperatureCounter	Counter32

EmdHumidityEntry
SEQUENCE
	ogEmdHumidityIndex	Integer32
	ogEmdHumidityEmd	OBJECT IDENTIFIER
	ogEmdHumidityName	DisplayString
	ogEmdHumidityDescription	DisplayString
	ogEmdHumidityValue	Integer32
	ogEmdHumidityCounter	Counter32

EmdDioEntry
SEQUENCE
	ogEmdDioIndex	Integer32
	ogEmdDioEmd	OBJECT IDENTIFIER
	ogEmdDioName	DisplayString
	ogEmdDioDescription	DisplayString
	ogEmdDioType	INTEGER
	ogEmdDioDirection	INTEGER
	ogEmdDioState	INTEGER
	ogEmdDioTriggerMode	INTEGER
	ogEmdDioCounter	Counter32

NetInterfaceEntry
SEQUENCE
	ogNetInterfaceIndex	Integer32
	ogNetInterfaceName	DisplayString
	ogNetInterfaceType	INTEGER
	ogNetInterfaceState	INTEGER

PowerSupplyEntry
SEQUENCE
	ogPowerSupplyIndex	Integer32
	ogPowerSupplyName	DisplayString
	ogPowerSupplyInputVoltage	Integer32
	ogPowerSupplyOutputCurrent	Integer32
	ogPowerSupplyTemperature	Integer32

UpsEntry
SEQUENCE
	ogUpsIndex	Integer32
	ogUpsName	DisplayString
	ogUpsDescription	DisplayString
	ogUpsType	DisplayString
	ogUpsLogEnabled	INTEGER
	ogUpsConnectType	INTEGER
	ogUpsState	INTEGER
	ogUpsTemperature	Integer32
	ogUpsHumidity	Integer32
	ogUpsBatteryState	INTEGER
	ogUpsBatteryRunTime	Integer32
	ogUpsBatteryRunTimeLow	Integer32
	ogUpsBatteryRunTimeRestart	Integer32
	ogUpsBatteryCharge	Integer32
	ogUpsBatteryVoltage	Integer32
	ogUpsBatteryNominalVoltage	Integer32
	ogUpsBatteryCurrent	Integer32
	ogUpsBatteryNominalCurrent	Integer32
	ogUpsBatteryTemperature	Integer32
	ogUpsInputFrequency	Integer32
	ogUpsInputNominalFrequency	Integer32
	ogUpsInputVoltage	Integer32
	ogUpsInputNominalVoltage	Integer32
	ogUpsInputCurrent	Integer32
	ogUpsInputNominalCurrent	Integer32
	ogUpsOutputFrequency	Integer32
	ogUpsOutputNominalFrequency	Integer32
	ogUpsOutputVoltage	Integer32
	ogUpsOutputNominalVoltage	Integer32
	ogUpsOutputCurrent	Integer32
	ogUpsOutputNominalCurrent	Integer32
	ogUpsOutputLoad	Integer32
	ogUpsOutputPower	Integer32
	ogUpsOutputTruePower	Integer32
	ogUpsCounter	Counter32

RpcEntry
SEQUENCE
	ogRpcIndex	Integer32
	ogRpcName	DisplayString
	ogRpcDescription	DisplayString
	ogRpcType	DisplayString
	ogRpcLogEnabled	INTEGER
	ogRpcOutletTotal	Counter32
	ogRpcMaxTemperature	Integer32
	ogRpcConnectType	INTEGER
	ogRpcInputFrequency	Integer32
	ogRpcInputVoltage	Integer32
	ogRpcInputCurrent	Integer32
	ogRpcCounter	Counter32

RpcOutletEntry
SEQUENCE
	ogRpcOutletIndex	Integer32
	ogRpcOutletRpc	OBJECT IDENTIFIER
	ogRpcOutletName	DisplayString
	ogRpcOutletState	INTEGER
	ogRpcOutletFrequency	Integer32
	ogRpcOutletVoltage	Integer32
	ogRpcOutletCurrent	Integer32
	ogRpcOutletLoad	Integer32

CellModemEntry
SEQUENCE
	ogCellModemIndex	Integer32
	ogCellModemVendor	DisplayString
	ogCellModemModel	DisplayString
	ogCellModemEnabled	INTEGER
	ogCellModemConnected	INTEGER
	ogCellModemNetwork	DisplayString
	ogCellModemRegistered	INTEGER
	ogCellModemTower	Integer32
	ogCellModemRadioTechnology	INTEGER
	ogCellModemApn	DisplayString
	ogCellModem3gRssi	Integer32
	ogCellModem4gRssi	Integer32
	ogCellModemSessionTime	Counter32
	ogCellModemSelectedSimCard	Counter32
	ogCellModemTemperature	Integer32
	ogCellModemCounter	Counter32

WifiClientEntry
SEQUENCE
	ogWifiClientIndex	Integer32
	ogWifiClientInterface	DisplayString
	ogWifiClientEnabled	INTEGER
	ogWifiClientEssid	DisplayString
	ogWifiClientIeeeMode	INTEGER
	ogWifiClientMode	INTEGER
	ogWifiClientFrequency	Unsigned32
	ogWifiClientApMac	DisplayString
	ogWifiClientBitRate	Unsigned32
	ogWifiClientTxPower	Integer32
	ogWifiClientLinkQuality	Unsigned32
	ogWifiClientRssi	Integer32
	ogWifiClientRxInvalidNwid	Counter32
	ogWifiClientRxInvalidCrypt	Counter32
	ogWifiClientRxInvalidFrag	Counter32
	ogWifiClientRxInvalidRetries	Counter32
	ogWifiClientRxInvalidMisc	Counter32
	ogWifiClientMissedBeacon	Counter32
	ogWifiClientCounter	Counter32

WifiApEntry
SEQUENCE
	ogWifiApIndex	Integer32
	ogWifiApInterface	DisplayString
	ogWifiApEnabled	INTEGER
	ogWifiApSsid	DisplayString
	ogWifiApIeeeMode	INTEGER
	ogWifiApFrequency	Unsigned32
	ogWifiApTxPower	Integer32
	ogWifiApCounter	Counter32

WifiApClientEntry
SEQUENCE
	ogWifiApClientIndex	Integer32
	ogWifiApClientAp	OBJECT IDENTIFIER
	ogWifiApClientMac	DisplayString
	ogWifiApClientInactiveTime	Counter32
	ogWifiApClientRxBytes	Counter32
	ogWifiApClientRxPackets	Counter32
	ogWifiApClientTxBytes	Counter32
	ogWifiApClientTxPackets	Counter32
	ogWifiApClientRssi	Integer32
	ogWifiApClientTxBitRate	Unsigned32

CheckEntry
SEQUENCE
	ogCheckIndex	Integer32
	ogCheckName	DisplayString
	ogCheckRepeatTimeout	Integer32
	ogCheckResetTimeout	Integer32
	ogCheckType	INTEGER
	ogCheckTriggerActions	Counter32
	ogCheckResolveActions	Counter32

CheckDeviceEntry
SEQUENCE
	ogCheckDeviceIndex	Integer32
	ogCheckDeviceCheck	OBJECT IDENTIFIER
	ogCheckDeviceName	DisplayString
	ogCheckDeviceRef	DisplayString

AlarmLogEntry
SEQUENCE
	ogAlarmLogIndex	Integer32
	ogAlarmEventId	Integer32
	ogAlarmName	DisplayString
	ogAlarmCheck	Integer32
	ogAlarmInstance	Integer32
	ogAlarmTime	DateAndTime
	ogAlarmType	INTEGER
	ogAlarmSummary	DisplayString
	ogAlarmDevice	DisplayString
	ogAlarmUser	DisplayString
	ogAlarmTriggerValue	Integer32
	ogAlarmCurrentValue	Integer32
	ogAlarmPreviousValue	Integer32
	ogAlarmState	INTEGER

CurrentAlarmEntry
SEQUENCE
	ogCurrentAlarmIndex	Integer32
	ogCurrentAlarmEventId	Integer32
	ogCurrentAlarmName	DisplayString
	ogCurrentAlarmCheck	Integer32
	ogCurrentAlarmInstance	Integer32
	ogCurrentAlarmTime	DateAndTime
	ogCurrentAlarmType	INTEGER
	ogCurrentAlarmSummary	DisplayString
	ogCurrentAlarmDevice	DisplayString
	ogCurrentAlarmUser	DisplayString
	ogCurrentAlarmTriggerValue	Integer32
	ogCurrentAlarmCurrentValue	Integer32
	ogCurrentAlarmPreviousValue	Integer32
	ogCurrentAlarmState	INTEGER

Defined Values

ogStatus2		1.3.6.1.4.1.25049.17
Opengear extended status and alert MIB
MODULE-IDENTITY

ogSystem		1.3.6.1.4.1.25049.17.1
OBJECT IDENTIFIER

ogFirmwareVersion		1.3.6.1.4.1.25049.17.1.1
The current device firmware.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

ogSerialNumber		1.3.6.1.4.1.25049.17.1.2
The current serial number (if applicable).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

ogSerialPortTable		1.3.6.1.4.1.25049.17.2
The devices serial port status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SerialPortEntry

ogSerialPortEntry		1.3.6.1.4.1.25049.17.2.1
A serial port status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SerialPortEntry

ogSerialPortIndex		1.3.6.1.4.1.25049.17.2.1.1
Index within the serial port table of this status
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogSerialPortLabel		1.3.6.1.4.1.25049.17.2.1.2
Serial port descriptive name
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

ogSerialPortSpeed		1.3.6.1.4.1.25049.17.2.1.3
Serial port speed in bits per second
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogSerialPortDataBits		1.3.6.1.4.1.25049.17.2.1.4
Serial port character size
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogSerialPortParity		1.3.6.1.4.1.25049.17.2.1.5
Serial port parity
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), odd(2), even(3), mark(4), space(5)

ogSerialPortStopBits		1.3.6.1.4.1.25049.17.2.1.6
Serial port number of stop bits
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	one(1), two(2), oneAndAHalf(3)

ogSerialPortFlowControl		1.3.6.1.4.1.25049.17.2.1.7
Serial port flow control type
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), hardware(2), software(3)

ogSerialPortMode		1.3.6.1.4.1.25049.17.2.1.8
Serial port operational mode type
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), console(2), sdt(3), terminal(4), bridge(5)

ogSerialPortLogLevel		1.3.6.1.4.1.25049.17.2.1.9
Serial port logging level
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), connect(2), inputAndOutput(3), inputOnly(4), outputOnly(5)

ogSerialPortRxBytes		1.3.6.1.4.1.25049.17.2.1.10
Serial port bytes received
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ogSerialPortTxBytes		1.3.6.1.4.1.25049.17.2.1.11
Serial port bytes transmitted
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ogSerialPortFramingErrors		1.3.6.1.4.1.25049.17.2.1.12
Serial port framing error total.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ogSerialPortParityErrors		1.3.6.1.4.1.25049.17.2.1.13
Serial port parity error total.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ogSerialPortOverrunErrors		1.3.6.1.4.1.25049.17.2.1.14
Serial port Overrun Error total.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ogSerialPortBreaks		1.3.6.1.4.1.25049.17.2.1.15
Serial port break total
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ogSerialPortDCD		1.3.6.1.4.1.25049.17.2.1.16
The status of the DCD signal.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogSerialPortDTR		1.3.6.1.4.1.25049.17.2.1.17
The status of the DTR signal.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogSerialPortDSR		1.3.6.1.4.1.25049.17.2.1.18
The status of the DSR signal.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogSerialPortCTS		1.3.6.1.4.1.25049.17.2.1.19
The status of the CTS signal.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogSerialPortRTS		1.3.6.1.4.1.25049.17.2.1.20
The status of the RTS signal.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogSerialUserTable		1.3.6.1.4.1.25049.17.3
This entity's serial port users table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SerialUserEntry

ogSerialUserEntry		1.3.6.1.4.1.25049.17.3.1
A user logged in on the serial port
Status: current	Access: not-accessible
OBJECT-TYPE
	SerialUserEntry

ogSerialUserIndex		1.3.6.1.4.1.25049.17.3.1.1
Index within the serial port active users table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogSerialUserStartTime		1.3.6.1.4.1.25049.17.3.1.2
The time and date the user session started.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ogSerialUserPort		1.3.6.1.4.1.25049.17.3.1.3
Serial port number
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogSerialUserLabel		1.3.6.1.4.1.25049.17.3.1.4
The readable label for the serial port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

ogSerialUserName		1.3.6.1.4.1.25049.17.3.1.5
The name of the user logged in on the port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

ogHostTable		1.3.6.1.4.1.25049.17.4
A table of monitored network hosts.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HostEntry

ogHostEntry		1.3.6.1.4.1.25049.17.4.1
A monitored network host.
Status: current	Access: not-accessible
OBJECT-TYPE
	HostEntry

ogHostIndex		1.3.6.1.4.1.25049.17.4.1.1
Index within the network host active users table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogHostName		1.3.6.1.4.1.25049.17.4.1.2
The name of this monitored network host.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ogHostIpV4Address		1.3.6.1.4.1.25049.17.4.1.3
The IPv4 Address of this monitored network host.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ogHostIpV6Address		1.3.6.1.4.1.25049.17.4.1.4
The IPv6 Address of this monitored network host.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ogHostServiceTable		1.3.6.1.4.1.25049.17.5
A table of services belonging to a monitored host.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HostServiceEntry

ogHostServiceEntry		1.3.6.1.4.1.25049.17.5.1
A monitored host service.
Status: current	Access: not-accessible
OBJECT-TYPE
	HostServiceEntry

ogHostServiceIndex		1.3.6.1.4.1.25049.17.5.1.1
Index within the RPC outlet table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogHostServiceHost		1.3.6.1.4.1.25049.17.5.1.2
The monitored host this service belongs to
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ogHostServiceType		1.3.6.1.4.1.25049.17.5.1.3
The type of service this is.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tcp(1), udp(2)

ogHostServicePort		1.3.6.1.4.1.25049.17.5.1.4
The TCP Port this service is on.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

ogHostServiceStatus		1.3.6.1.4.1.25049.17.5.1.5
The availabalilty of this service.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), available(2), unavailable(3)

ogHostServiceCounter		1.3.6.1.4.1.25049.17.5.1.6
The number of alerts related to this service.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogHostUserTable		1.3.6.1.4.1.25049.17.6
This entity's serial port users table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HostUserEntry

ogHostUserEntry		1.3.6.1.4.1.25049.17.6.1
A user logged in on the serial port
Status: current	Access: not-accessible
OBJECT-TYPE
	HostUserEntry

ogHostUserIndex		1.3.6.1.4.1.25049.17.6.1.1
Index within the network host active users table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogHostUserHost		1.3.6.1.4.1.25049.17.6.1.2
The monitored host this user is associated with.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ogHostUserStartTime		1.3.6.1.4.1.25049.17.6.1.3
The date and time the user session started.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ogHostUserAddress		1.3.6.1.4.1.25049.17.6.1.4
The network host address.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

ogHostUserHostName		1.3.6.1.4.1.25049.17.6.1.5
The network host's host name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

ogHostUserName		1.3.6.1.4.1.25049.17.6.1.6
The network host's active username.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

ogWebUserTable		1.3.6.1.4.1.25049.17.7
This entity's serial port users table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WebUserEntry

ogWebUserEntry		1.3.6.1.4.1.25049.17.7.1
A user logged in on the serial port
Status: current	Access: not-accessible
OBJECT-TYPE
	WebUserEntry

ogWebUserIndex		1.3.6.1.4.1.25049.17.7.1.1
Index within the network host active users table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogWebUserStartTime		1.3.6.1.4.1.25049.17.7.1.2
The web users session start date and time.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ogWebUserName		1.3.6.1.4.1.25049.17.7.1.3
The web users active username.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

ogWebUserSourceAddress		1.3.6.1.4.1.25049.17.7.1.4
The web users source address.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

ogWebUserSourcePort		1.3.6.1.4.1.25049.17.7.1.5
The web users source tcp port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ogEmdTable		1.3.6.1.4.1.25049.17.8
This devices temperature monitoring table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EmdEntry

ogEmdEntry		1.3.6.1.4.1.25049.17.8.1
EMD status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	EmdEntry

ogEmdIndex		1.3.6.1.4.1.25049.17.8.1.1
Index within the EMD status table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogEmdName		1.3.6.1.4.1.25049.17.8.1.2
The name of the EMD device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogEmdDescription		1.3.6.1.4.1.25049.17.8.1.3
A description of the EMD device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogEmdEnabled		1.3.6.1.4.1.25049.17.8.1.4
The enabled status of the EMD
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogEmdLogEnabled		1.3.6.1.4.1.25049.17.8.1.5
The logging status of the EMD
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogEmdConnectType		1.3.6.1.4.1.25049.17.8.1.6
How the EMD device is connected.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	internal(1), serial(2), network(3)

ogEmdTemperatureTotal		1.3.6.1.4.1.25049.17.8.1.7
The number of temperature sensors contained in this EMD.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogEmdHumidityTotal		1.3.6.1.4.1.25049.17.8.1.8
The number of humidity sensors contained in this EMD.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogEmdDioInputTotal		1.3.6.1.4.1.25049.17.8.1.9
The number of DIOs contained in this EMD.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogEmdTemperatureTable		1.3.6.1.4.1.25049.17.9
A table of temperature sensors belonging to EMDs
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EmdTemperatureEntry

ogEmdTemperatureEntry		1.3.6.1.4.1.25049.17.9.1
EMD status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	EmdTemperatureEntry

ogEmdTemperatureIndex		1.3.6.1.4.1.25049.17.9.1.1
Index within the EMD status table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogEmdTemperatureEmd		1.3.6.1.4.1.25049.17.9.1.2
The EMD this temperature sensor is related to.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ogEmdTemperatureName		1.3.6.1.4.1.25049.17.9.1.3
The name of the EMD temperature sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogEmdTemperatureDescription		1.3.6.1.4.1.25049.17.9.1.4
A description of the EMD device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogEmdTemperatureValue		1.3.6.1.4.1.25049.17.9.1.5
The current temperature reading on the EMD.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogEmdTemperatureCounter		1.3.6.1.4.1.25049.17.9.1.6
Number of alerts triggered on the EMD.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogEmdHumidityTable		1.3.6.1.4.1.25049.17.10
A table of humidity sensors belonging to EMDs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EmdHumidityEntry

ogEmdHumidityEntry		1.3.6.1.4.1.25049.17.10.1
EMD Humidity sensor status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	EmdHumidityEntry

ogEmdHumidityIndex		1.3.6.1.4.1.25049.17.10.1.1
Index within the EMD status table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogEmdHumidityEmd		1.3.6.1.4.1.25049.17.10.1.2
The EMD this humidity sensor is related to.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ogEmdHumidityName		1.3.6.1.4.1.25049.17.10.1.3
The name of the EMD.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogEmdHumidityDescription		1.3.6.1.4.1.25049.17.10.1.4
A description of the EMD device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogEmdHumidityValue		1.3.6.1.4.1.25049.17.10.1.5
The current humidity value on the EMD
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogEmdHumidityCounter		1.3.6.1.4.1.25049.17.10.1.6
Number of alerts triggered on the EMD
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogEmdDioTable		1.3.6.1.4.1.25049.17.11
Ths Digital I/O status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EmdDioEntry

ogEmdDioEntry		1.3.6.1.4.1.25049.17.11.1
Digital I/O status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	EmdDioEntry

ogEmdDioIndex		1.3.6.1.4.1.25049.17.11.1.1
Index within the Digital I/O status table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogEmdDioEmd		1.3.6.1.4.1.25049.17.11.1.2
The EMD this Digital I/O relates to.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ogEmdDioName		1.3.6.1.4.1.25049.17.11.1.3
The ID of this Digital I/O.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogEmdDioDescription		1.3.6.1.4.1.25049.17.11.1.4
A description of this Digital I/O.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogEmdDioType		1.3.6.1.4.1.25049.17.11.1.5
Digital I/O type (TTL Input/Output or High-Voltage Output).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ttlInputOutput(1), highVoltageOutput(2)

ogEmdDioDirection		1.3.6.1.4.1.25049.17.11.1.6
The direction of the Digital I/O (Input or Output)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	output(1), input(2)

ogEmdDioState		1.3.6.1.4.1.25049.17.11.1.7
The electrical state value of the Digital I/O (Low or High)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	high(1), low(2)

ogEmdDioTriggerMode		1.3.6.1.4.1.25049.17.11.1.8
The Trigger Mode of the Digital I/O
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	invalid(1), risingEdge(2), fallingEdge(3), risingFallingEdge(4)

ogEmdDioCounter		1.3.6.1.4.1.25049.17.11.1.9
The trigger counter of this Digital I/O
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogNetInterfaceTable		1.3.6.1.4.1.25049.17.12
This devices network interface status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NetInterfaceEntry

ogNetInterfaceEntry		1.3.6.1.4.1.25049.17.12.1
EMD status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	NetInterfaceEntry

ogNetInterfaceIndex		1.3.6.1.4.1.25049.17.12.1.1
Index within the network interface status table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogNetInterfaceName		1.3.6.1.4.1.25049.17.12.1.2
The name of a network interface.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogNetInterfaceType		1.3.6.1.4.1.25049.17.12.1.3
The type of this network interface entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unavailable(1), ethernet(2), wifi(3), cellModem(4), v92Modem(5), vpn(6)

ogNetInterfaceState		1.3.6.1.4.1.25049.17.12.1.4
The current status of this network interface entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unavailable(1), down(2), starting(3), up(4), stopping(5)

ogPowerSupplyTable		1.3.6.1.4.1.25049.17.13
This entity's Power Supply table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PowerSupplyEntry

ogPowerSupplyEntry		1.3.6.1.4.1.25049.17.13.1
Power Supply status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	PowerSupplyEntry

ogPowerSupplyIndex		1.3.6.1.4.1.25049.17.13.1.1
Index within the Power Supply status table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ogPowerSupplyName		1.3.6.1.4.1.25049.17.13.1.2
The name of the Power Supply.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogPowerSupplyInputVoltage		1.3.6.1.4.1.25049.17.13.1.3
Current temperature of the Power Supply
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogPowerSupplyOutputCurrent		1.3.6.1.4.1.25049.17.13.1.4
Current temperature of the Power Supply
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogPowerSupplyTemperature		1.3.6.1.4.1.25049.17.13.1.5
Current temperature of the Power Supply
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsTable		1.3.6.1.4.1.25049.17.14
Ths Uninterruptable Power Supply (UPS) status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UpsEntry

ogUpsEntry		1.3.6.1.4.1.25049.17.14.1
Digital I/O status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	UpsEntry

ogUpsIndex		1.3.6.1.4.1.25049.17.14.1.1
Index within the UPS status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogUpsName		1.3.6.1.4.1.25049.17.14.1.2
The ID of this UPS.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogUpsDescription		1.3.6.1.4.1.25049.17.14.1.3
A description of this UPS.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogUpsType		1.3.6.1.4.1.25049.17.14.1.4
The UPS driver type.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogUpsLogEnabled		1.3.6.1.4.1.25049.17.14.1.5
The logging status of the UPS
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogUpsConnectType		1.3.6.1.4.1.25049.17.14.1.6
How the UPS device is being monitored.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), usb(2), http(3), https(4), snmp(5), serial(6)

ogUpsState		1.3.6.1.4.1.25049.17.14.1.7
The current state the UPS is running in.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), onLine(2), onBattery(3), lowBattery(4), onBypass(5)

ogUpsTemperature		1.3.6.1.4.1.25049.17.14.1.8
The UPS temperature. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsHumidity		1.3.6.1.4.1.25049.17.14.1.9
The UPS humidity. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsBatteryState		1.3.6.1.4.1.25049.17.14.1.10
The current state of the UPS battery.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), normal(2), warning(3), low(4), depleted(5)

ogUpsBatteryRunTime		1.3.6.1.4.1.25049.17.14.1.11
Battery runtime (seconds). Negative if unavailable
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1..31449600

ogUpsBatteryRunTimeLow		1.3.6.1.4.1.25049.17.14.1.12
Estimated remaining battery runtime when UPS switches to Low Battery. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1..31449600

ogUpsBatteryRunTimeRestart		1.3.6.1.4.1.25049.17.14.1.13
Minimum battery runtime for UPS restart after power-off (seconds). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1..31449600

ogUpsBatteryCharge		1.3.6.1.4.1.25049.17.14.1.14
Estimated percent of Battery charge remaining. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1..100

ogUpsBatteryVoltage		1.3.6.1.4.1.25049.17.14.1.15
The magnitude of the current battery voltage. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsBatteryNominalVoltage		1.3.6.1.4.1.25049.17.14.1.16
Nominal battery voltage (V). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsBatteryCurrent		1.3.6.1.4.1.25049.17.14.1.17
The UPS battery current. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsBatteryNominalCurrent		1.3.6.1.4.1.25049.17.14.1.18
The nominal UPS battery current. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsBatteryTemperature		1.3.6.1.4.1.25049.17.14.1.19
The UPS battery temperature. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsInputFrequency		1.3.6.1.4.1.25049.17.14.1.20
Input line frequency (Hz). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsInputNominalFrequency		1.3.6.1.4.1.25049.17.14.1.21
Nominal input line frequency (Hz). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsInputVoltage		1.3.6.1.4.1.25049.17.14.1.22
The magnitude of the UPS input voltage. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsInputNominalVoltage		1.3.6.1.4.1.25049.17.14.1.23
The nominal input voltage. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsInputCurrent		1.3.6.1.4.1.25049.17.14.1.24
The input current. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsInputNominalCurrent		1.3.6.1.4.1.25049.17.14.1.25
The nominal input current. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsOutputFrequency		1.3.6.1.4.1.25049.17.14.1.26
Output line frequency (Hz). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsOutputNominalFrequency		1.3.6.1.4.1.25049.17.14.1.27
Nominal output line frequency (Hz). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsOutputVoltage		1.3.6.1.4.1.25049.17.14.1.28
The magnitude of the UPS output voltage. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsOutputNominalVoltage		1.3.6.1.4.1.25049.17.14.1.29
The nominal magnitude of the UPS output voltage. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsOutputCurrent		1.3.6.1.4.1.25049.17.14.1.30
The magnitude of the UPS input current. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsOutputNominalCurrent		1.3.6.1.4.1.25049.17.14.1.31
The nominal magnitude of the UPS input current. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsOutputLoad		1.3.6.1.4.1.25049.17.14.1.32
Estimated percent of UPS power capacity being used.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..100

ogUpsOutputPower		1.3.6.1.4.1.25049.17.14.1.33
The current value of apparent power (Volt-Amps). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsOutputTruePower		1.3.6.1.4.1.25049.17.14.1.34
The current value of real power (Watts). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogUpsCounter		1.3.6.1.4.1.25049.17.14.1.35
Number of alerts triggered on the UPS
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogRpcTable		1.3.6.1.4.1.25049.17.15
This entity's Remote Power Controller (RPC) table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RpcEntry

ogRpcEntry		1.3.6.1.4.1.25049.17.15.1
RPC status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	RpcEntry

ogRpcIndex		1.3.6.1.4.1.25049.17.15.1.1
Index within the RPC status table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ogRpcName		1.3.6.1.4.1.25049.17.15.1.2
The name of the RPC device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogRpcDescription		1.3.6.1.4.1.25049.17.15.1.3
A description for the RPC device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogRpcType		1.3.6.1.4.1.25049.17.15.1.4
A type for the RPC device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogRpcLogEnabled		1.3.6.1.4.1.25049.17.15.1.5
The logging status of the RPC
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogRpcOutletTotal		1.3.6.1.4.1.25049.17.15.1.6
The number of outlets on this RPC
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogRpcMaxTemperature		1.3.6.1.4.1.25049.17.15.1.7
Maximum temperature on the RPC
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogRpcConnectType		1.3.6.1.4.1.25049.17.15.1.8
How the RPC device is connected.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	serial(1), network(2)

ogRpcInputFrequency		1.3.6.1.4.1.25049.17.15.1.9
Input line frequency (Hz). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogRpcInputVoltage		1.3.6.1.4.1.25049.17.15.1.10
The magnitude of the RPC input voltage. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogRpcInputCurrent		1.3.6.1.4.1.25049.17.15.1.11
The input current. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogRpcCounter		1.3.6.1.4.1.25049.17.15.1.12
Number of alerts triggered on the RPC
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogRpcOutletTable		1.3.6.1.4.1.25049.17.16
This RPC's outlet table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RpcOutletEntry

ogRpcOutletEntry		1.3.6.1.4.1.25049.17.16.1
RPC Outlet status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	RpcOutletEntry

ogRpcOutletIndex		1.3.6.1.4.1.25049.17.16.1.1
Index within the RPC outlet table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogRpcOutletRpc		1.3.6.1.4.1.25049.17.16.1.2
The RPC this outlet belongs to
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ogRpcOutletName		1.3.6.1.4.1.25049.17.16.1.3
The name of the RPC outlet.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogRpcOutletState		1.3.6.1.4.1.25049.17.16.1.4
The power status of the RPC outlet
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2), transitioning(3), unavailable(4)

ogRpcOutletFrequency		1.3.6.1.4.1.25049.17.16.1.5
Output line frequency (Hz). Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogRpcOutletVoltage		1.3.6.1.4.1.25049.17.16.1.6
The voltage on this outlet. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1..2640

ogRpcOutletCurrent		1.3.6.1.4.1.25049.17.16.1.7
Current measured on this outlet. Negative if unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1..25500

ogRpcOutletLoad		1.3.6.1.4.1.25049.17.16.1.8
Estimated percent of RPC outlet power capacity being used.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1..100

ogCellModemTable		1.3.6.1.4.1.25049.17.17
Ths cellular modem status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CellModemEntry

ogCellModemEntry		1.3.6.1.4.1.25049.17.17.1
A cellular modem status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CellModemEntry

ogCellModemIndex		1.3.6.1.4.1.25049.17.17.1.1
Index of the cellular modem status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogCellModemVendor		1.3.6.1.4.1.25049.17.17.1.2
The Manufacturer ID of Cellular Modem.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogCellModemModel		1.3.6.1.4.1.25049.17.17.1.3
The Cellular Modem model name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogCellModemEnabled		1.3.6.1.4.1.25049.17.17.1.4
The enabled state of the modem.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

ogCellModemConnected		1.3.6.1.4.1.25049.17.17.1.5
The connected state of the modem.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	connected(1), disconnected(2)

ogCellModemNetwork		1.3.6.1.4.1.25049.17.17.1.6
The name of the network provider.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogCellModemRegistered		1.3.6.1.4.1.25049.17.17.1.7
The registration state of the modem.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	registered(1), unregistered(2)

ogCellModemTower		1.3.6.1.4.1.25049.17.17.1.8
The current cellular tower ID.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogCellModemRadioTechnology		1.3.6.1.4.1.25049.17.17.1.9
The current Radio Access Technology being used
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unavailable(1), cdma(2), evdo(3), gsm(4), umts(5), lte(6)

ogCellModemApn		1.3.6.1.4.1.25049.17.17.1.10
The APN configured for this cellmodem.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogCellModem3gRssi		1.3.6.1.4.1.25049.17.17.1.11
The current 3G Received Signal Strength (RSSI) if applicable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-99..99

ogCellModem4gRssi		1.3.6.1.4.1.25049.17.17.1.12
The current 4G Received Signal Strength (RSSI) if applicable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-99..99

ogCellModemSessionTime		1.3.6.1.4.1.25049.17.17.1.13
The number of seconds the modem session has been up for.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogCellModemSelectedSimCard		1.3.6.1.4.1.25049.17.17.1.14
The SIM card currently being used by this modem.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogCellModemTemperature		1.3.6.1.4.1.25049.17.17.1.15
The current temperature of the Cellular Modem.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogCellModemCounter		1.3.6.1.4.1.25049.17.17.1.16
The number of alerts the modem has triggered.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiClientTable		1.3.6.1.4.1.25049.17.18
Ths wireless client status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WifiClientEntry

ogWifiClientEntry		1.3.6.1.4.1.25049.17.18.1
A wireless client status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	WifiClientEntry

ogWifiClientIndex		1.3.6.1.4.1.25049.17.18.1.1
Index of the wireless client status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogWifiClientInterface		1.3.6.1.4.1.25049.17.18.1.2
The wireless client network interface name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

ogWifiClientEnabled		1.3.6.1.4.1.25049.17.18.1.3
The wireless client enabled state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogWifiClientEssid		1.3.6.1.4.1.25049.17.18.1.4
The ESSID this wireless client is currently associated with.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogWifiClientIeeeMode		1.3.6.1.4.1.25049.17.18.1.5
The IEEE 802.11 mode of this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unavailable(1), ieee802Dot11B(2), ieee802Dot11BG(3), ieee802Dot11BGN(4), ieee802Dot11ABGN(5)

ogWifiClientMode		1.3.6.1.4.1.25049.17.18.1.6
The operating mode of this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unavailable(1), managed(2), adhoc(3)

ogWifiClientFrequency		1.3.6.1.4.1.25049.17.18.1.7
The current frequency of this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ogWifiClientApMac		1.3.6.1.4.1.25049.17.18.1.8
The Access Point ID this wireless client is associated with.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

ogWifiClientBitRate		1.3.6.1.4.1.25049.17.18.1.9
The current bit-rate of this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ogWifiClientTxPower		1.3.6.1.4.1.25049.17.18.1.10
The current Tx-Power of this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogWifiClientLinkQuality		1.3.6.1.4.1.25049.17.18.1.11
The normalized link quality of this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ogWifiClientRssi		1.3.6.1.4.1.25049.17.18.1.12
The current Signal Level of this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogWifiClientRxInvalidNwid		1.3.6.1.4.1.25049.17.18.1.13
The count of invalid Network ID's for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiClientRxInvalidCrypt		1.3.6.1.4.1.25049.17.18.1.14
The count of invalid crypt's for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiClientRxInvalidFrag		1.3.6.1.4.1.25049.17.18.1.15
The count of invalid frag's for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiClientRxInvalidRetries		1.3.6.1.4.1.25049.17.18.1.16
The count of invalid retries for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiClientRxInvalidMisc		1.3.6.1.4.1.25049.17.18.1.17
The count of invalid misc's for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiClientMissedBeacon		1.3.6.1.4.1.25049.17.18.1.18
The count of missed beacon's for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiClientCounter		1.3.6.1.4.1.25049.17.18.1.19
The number of alerts triggered by this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiApTable		1.3.6.1.4.1.25049.17.19
Ths wireless interface status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WifiApEntry

ogWifiApEntry		1.3.6.1.4.1.25049.17.19.1
A wireless interface status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	WifiApEntry

ogWifiApIndex		1.3.6.1.4.1.25049.17.19.1.1
Index of the wireless server status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogWifiApInterface		1.3.6.1.4.1.25049.17.19.1.2
The wireless access point network interface name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

ogWifiApEnabled		1.3.6.1.4.1.25049.17.19.1.3
The enabled status of the wireless server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

ogWifiApSsid		1.3.6.1.4.1.25049.17.19.1.4
The SSID for this wireless access point.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogWifiApIeeeMode		1.3.6.1.4.1.25049.17.19.1.5
The IEEE 802.11 mode of this wireless access point.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unavailable(1), ieee802Dot11B(2), ieee802Dot11BG(3), ieee802Dot11BGN(4), ieee802Dot11ABGN(5)

ogWifiApFrequency		1.3.6.1.4.1.25049.17.19.1.6
The current frequency of this wireless access point.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ogWifiApTxPower		1.3.6.1.4.1.25049.17.19.1.7
The current Tx-Power of this wireless access point.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogWifiApCounter		1.3.6.1.4.1.25049.17.19.1.8
The number of alerts triggered by this wireless access point.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiApClientTable		1.3.6.1.4.1.25049.17.20
This RPC's outlet table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WifiApClientEntry

ogWifiApClientEntry		1.3.6.1.4.1.25049.17.20.1
RPC Outlet status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	WifiApClientEntry

ogWifiApClientIndex		1.3.6.1.4.1.25049.17.20.1.1
Index within the wireless AP client table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogWifiApClientAp		1.3.6.1.4.1.25049.17.20.1.2
The wireless AP this client is assiciated with.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ogWifiApClientMac		1.3.6.1.4.1.25049.17.20.1.3
The MAC address of the Access Point this wireless client is associated with.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

ogWifiApClientInactiveTime		1.3.6.1.4.1.25049.17.20.1.4
The Inactive Time for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiApClientRxBytes		1.3.6.1.4.1.25049.17.20.1.5
The number of received bytes for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiApClientRxPackets		1.3.6.1.4.1.25049.17.20.1.6
The number of received packets for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiApClientTxBytes		1.3.6.1.4.1.25049.17.20.1.7
The number of transmitted bytes for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiApClientTxPackets		1.3.6.1.4.1.25049.17.20.1.8
The number of transmitted packets for this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogWifiApClientRssi		1.3.6.1.4.1.25049.17.20.1.9
The current Signal Level of this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogWifiApClientTxBitRate		1.3.6.1.4.1.25049.17.20.1.10
The current transmission bit-rate of this wireless client.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ogCheckTable		1.3.6.1.4.1.25049.17.21
Ths auto-response check table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CheckEntry

ogCheckEntry		1.3.6.1.4.1.25049.17.21.1
An auto-response check entry
Status: current	Access: not-accessible
OBJECT-TYPE
	CheckEntry

ogCheckIndex		1.3.6.1.4.1.25049.17.21.1.1
Index of the auto-response rule
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogCheckName		1.3.6.1.4.1.25049.17.21.1.2
The ID of this auto-response rule.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogCheckRepeatTimeout		1.3.6.1.4.1.25049.17.21.1.3
The minimum seconds before trigger actions can be repeated for this auto-response.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ogCheckResetTimeout		1.3.6.1.4.1.25049.17.21.1.4
The minimum seconds after resolution before this auto-response can be triggered again.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ogCheckType		1.3.6.1.4.1.25049.17.21.1.5
The auto-response check type
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), serialSignal(2), serialUser(3), serialPattern(4), hostPing(5), hostService(6), hostUser(7), webUser(8), envTemperature(9), envHumidity(10), dioInput(11), netInterface(12), powerSupplyInputVoltage(13), powerSupplyOutputCurrent(14), powerSupplyTemperature(15), upsInputVoltage(16), upsBatteryCharge(17), upsBatteryTemperature(18), upsOutputLoad(19), upsInputFrequency(20), upsStateOnBattery(21), upsStateLowBattery(22), rpcInput(23), rpcOutletState(24), rpcOutletOutput(25), cellMessage(26), cellData(27), cellSignal(28), cellApn(29), cellTower(30), cellNetwork(31), wirelessClientConnect(32), wirelessClientSignal(33), wirelessApAssociation(34), wirelessApAuthentication(35), dialPoolHealth(36), custom(255)

ogCheckTriggerActions		1.3.6.1.4.1.25049.17.21.1.6
The number of Trigger Actions configured for the auto-response.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogCheckResolveActions		1.3.6.1.4.1.25049.17.21.1.7
The number of Resolve Actions configured for the auto-response.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ogCheckDeviceTable		1.3.6.1.4.1.25049.17.22
The auto-response device reference table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CheckDeviceEntry

ogCheckDeviceEntry		1.3.6.1.4.1.25049.17.22.1
RPC Outlet status entry
Status: current	Access: not-accessible
OBJECT-TYPE
	CheckDeviceEntry

ogCheckDeviceIndex		1.3.6.1.4.1.25049.17.22.1.1
Index within the auto-response device outlet table
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogCheckDeviceCheck		1.3.6.1.4.1.25049.17.22.1.2
The check this device is associated with.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ogCheckDeviceName		1.3.6.1.4.1.25049.17.22.1.3
The name of a device pertaining to the auto-reponse.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogCheckDeviceRef		1.3.6.1.4.1.25049.17.22.1.4
The reference ID of the device pertaining to the auto-reponse.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ogAlarm		1.3.6.1.4.1.25049.17.23
OBJECT IDENTIFIER

ogAlarmLogTable		1.3.6.1.4.1.25049.17.23.1
The alarm history table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AlarmLogEntry

ogAlarmLogEntry		1.3.6.1.4.1.25049.17.23.1.1
An alarm entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	AlarmLogEntry

ogAlarmLogIndex		1.3.6.1.4.1.25049.17.23.1.1.1
Index within the current alarm table of this alarm.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogAlarmEventId		1.3.6.1.4.1.25049.17.23.1.1.2
Unique event ID for this alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogAlarmName		1.3.6.1.4.1.25049.17.23.1.1.3
The check ID that this alarm pertains to.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

ogAlarmCheck		1.3.6.1.4.1.25049.17.23.1.1.4
The auto-response index this alarm relates to.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogAlarmInstance		1.3.6.1.4.1.25049.17.23.1.1.5
The reference index for this alarm instance.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogAlarmTime		1.3.6.1.4.1.25049.17.23.1.1.6
The UTC date and time for when this alarm was created.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ogAlarmType		1.3.6.1.4.1.25049.17.23.1.1.7
A reference to an Alarm Type Object.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	serialSignalCts(1), serialSignalDcd(2), serialSignalDsr(3), serialPatternTx(4), serialPatternRx(5), serialUserSession(6), hostPingDown(7), hostPingUp(8), hostServiceDown(9), hostServiceUp(10), hostUserSession(11), webUserSession(12), envTemperatureLow(13), envTemperatureHigh(14), envHumidityLow(15), envHumidityHigh(16), dioSignalOpened(17), dioSignalClosed(18), netInterfaceDown(19), netInterfaceStarting(20), netInterfaceUp(21), netInterfaceStopping(22), powerSupplyInputVoltageLow(23), powerSupplyInputVoltageHigh(24), powerSupplyOutputCurrentLow(25), powerSupplyOutputCurrentHigh(26), powerSupplyTemperatureLow(27), powerSupplyTemperatureHigh(28), upsTemperatureHigh(29), upsTemperatureLow(30), upsHumidityHigh(31), upsHumidityLow(32), upsOnBattery(33), upsLowBattery(34), upsBatteryChargeLow(35), upsBatteryChargeHigh(36), upsBatteryVoltageLow(37), upsBatteryVoltageHigh(38), upsBatteryCurrentLow(39), upsBatteryCurrentHigh(40), upsBatteryTemperatureLow(41), upsBatteryTemperatureHigh(42), upsInputFrequencyLow(43), upsInputFrequencyHigh(44), upsInputVoltageLow(45), upsInputVoltageHigh(46), upsInputCurrentLow(47), upsInputCurrentHigh(48), upsOutputFrequencyLow(49), upsOutputFrequencyHigh(50), upsOutputVoltageLow(51), upsOutputVoltageHigh(52), upsOutputCurrentLow(53), upsOutputCurrentHigh(54), upsOutputLoadLow(55), upsOutputLoadHigh(56), upsOutputPowerLow(57), upsOutputPowerHigh(58), upsOutputTruePowerLow(59), upsOutputTruePowerHigh(60), rpcInputFrequencyLow(61), rpcInputFrequencyHigh(62), rpcInputVoltageLow(63), rpcInputVoltageHigh(64), rpcInputCurrentLow(65), rpcInputCurrentHigh(66), rpcOutletFrequencyHigh(67), rpcOutletFrequencyLow(68), rpcOutletVoltageHigh(69), rpcOutletVoltageLow(70), rpcOutletCurrentHigh(71), rpcOutletCurrentLow(72), rpcOutletStateOff(73), rpcOutletStateOn(74), cellDataUsage(75), cellMessageReceived(76), cellSignalLow(77), cellSignalHigh(78), cellApnChanged(79), cellTowerChanged(80), cellNetworkChanged(81), wirelessClientConnected(82), wirelessClientDisconnected(83), wirelessClientSignalLow(84), wirelessClientSignalHigh(85), wirelessApAssociation(86), wirelessApDisassociation(87), wirelessApAuthenticationFailure(88), dialPoolHealth(89), customCheckFailure(255), unknown(65535)

ogAlarmSummary		1.3.6.1.4.1.25049.17.23.1.1.8
The human readable summary of this alarm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ogAlarmDevice		1.3.6.1.4.1.25049.17.23.1.1.9
The device ID that this alarm pertains to.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ogAlarmUser		1.3.6.1.4.1.25049.17.23.1.1.10
The user ID that this alarm pertains to.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ogAlarmTriggerValue		1.3.6.1.4.1.25049.17.23.1.1.11
The threshold value which triggers the alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogAlarmCurrentValue		1.3.6.1.4.1.25049.17.23.1.1.12
The value as of the time of this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogAlarmPreviousValue		1.3.6.1.4.1.25049.17.23.1.1.13
The former value of this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogAlarmState		1.3.6.1.4.1.25049.17.23.1.1.14
The effective alarm state.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), triggered(2), resolving(3), waiting(4), disabled(5), unresolvable(6)

ogCurrentAlarmTable		1.3.6.1.4.1.25049.17.23.2
The alarm history table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CurrentAlarmEntry

ogCurrentAlarmEntry		1.3.6.1.4.1.25049.17.23.2.1
An alarm entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CurrentAlarmEntry

ogCurrentAlarmIndex		1.3.6.1.4.1.25049.17.23.2.1.1
Index within the current alarm table of this alarm.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

ogCurrentAlarmEventId		1.3.6.1.4.1.25049.17.23.2.1.2
Unique event ID for this alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogCurrentAlarmName		1.3.6.1.4.1.25049.17.23.2.1.3
The ID of the check this alarm pertains to.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

ogCurrentAlarmCheck		1.3.6.1.4.1.25049.17.23.2.1.4
The auto-response index this alarm relates to.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogCurrentAlarmInstance		1.3.6.1.4.1.25049.17.23.2.1.5
The reference index for this alarm instance.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogCurrentAlarmTime		1.3.6.1.4.1.25049.17.23.2.1.6
The UTC date and time for when this alarm was created.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ogCurrentAlarmType		1.3.6.1.4.1.25049.17.23.2.1.7
The specific Alarm Type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	serialSignalCts(1), serialSignalDcd(2), serialSignalDsr(3), serialPatternTx(4), serialPatternRx(5), serialUserSession(6), hostPingDown(7), hostPingUp(8), hostServiceDown(9), hostServiceUp(10), hostUserSession(11), webUserSession(12), envTemperatureLow(13), envTemperatureHigh(14), envHumidityLow(15), envHumidityHigh(16), dioSignalOpened(17), dioSignalClosed(18), netInterfaceDown(19), netInterfaceStarting(20), netInterfaceUp(21), netInterfaceStopping(22), powerSupplyInputVoltageLow(23), powerSupplyInputVoltageHigh(24), powerSupplyOutputCurrentLow(25), powerSupplyOutputCurrentHigh(26), powerSupplyTemperatureLow(27), powerSupplyTemperatureHigh(28), upsTemperatureHigh(29), upsTemperatureLow(30), upsHumidityHigh(31), upsHumidityLow(32), upsOnBattery(33), upsLowBattery(34), upsBatteryChargeLow(35), upsBatteryChargeHigh(36), upsBatteryVoltageLow(37), upsBatteryVoltageHigh(38), upsBatteryCurrentLow(39), upsBatteryCurrentHigh(40), upsBatteryTemperatureLow(41), upsBatteryTemperatureHigh(42), upsInputFrequencyLow(43), upsInputFrequencyHigh(44), upsInputVoltageLow(45), upsInputVoltageHigh(46), upsInputCurrentLow(47), upsInputCurrentHigh(48), upsOutputFrequencyLow(49), upsOutputFrequencyHigh(50), upsOutputVoltageLow(51), upsOutputVoltageHigh(52), upsOutputCurrentLow(53), upsOutputCurrentHigh(54), upsOutputLoadLow(55), upsOutputLoadHigh(56), upsOutputPowerLow(57), upsOutputPowerHigh(58), upsOutputTruePowerLow(59), upsOutputTruePowerHigh(60), rpcInputFrequencyLow(61), rpcInputFrequencyHigh(62), rpcInputVoltageLow(63), rpcInputVoltageHigh(64), rpcInputCurrentLow(65), rpcInputCurrentHigh(66), rpcOutletFrequencyHigh(67), rpcOutletFrequencyLow(68), rpcOutletVoltageHigh(69), rpcOutletVoltageLow(70), rpcOutletCurrentHigh(71), rpcOutletCurrentLow(72), rpcOutletStateOff(73), rpcOutletStateOn(74), cellDataUsage(75), cellMessageReceived(76), cellSignalLow(77), cellSignalHigh(78), cellApnChanged(79), cellTowerChanged(80), cellNetworkChanged(81), wirelessClientConnected(82), wirelessClientDisconnected(83), wirelessClientSignalLow(84), wirelessClientSignalHigh(85), wirelessApAssociation(86), wirelessApDisassociation(87), wirelessApAuthenticationFailure(88), dialPoolHealth(89), customCheckFailure(255), unknown(65535)

ogCurrentAlarmSummary		1.3.6.1.4.1.25049.17.23.2.1.8
A readable summary of this alarm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ogCurrentAlarmDevice		1.3.6.1.4.1.25049.17.23.2.1.9
The ID of the device this alarm pertains to.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ogCurrentAlarmUser		1.3.6.1.4.1.25049.17.23.2.1.10
The ID of the user this alarm pertains to.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ogCurrentAlarmTriggerValue		1.3.6.1.4.1.25049.17.23.2.1.11
The threshold value which triggers the alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogCurrentAlarmCurrentValue		1.3.6.1.4.1.25049.17.23.2.1.12
The value as of the time of this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogCurrentAlarmPreviousValue		1.3.6.1.4.1.25049.17.23.2.1.13
The former value of this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ogCurrentAlarmState		1.3.6.1.4.1.25049.17.23.2.1.14
The effective alarm state.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), triggered(2), resolving(3), waiting(4), disabled(5), unresolvable(6)

ogStatus2NotificationPrefix		1.3.6.1.4.1.25049.17.100
OBJECT IDENTIFIER

ogMibNotifications		1.3.6.1.4.1.25049.17.100.0
OBJECT IDENTIFIER

ogSerialSignalNotification		1.3.6.1.4.1.25049.17.100.0.1
The notification sent when a serial signal changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogSerialPatternNotification		1.3.6.1.4.1.25049.17.100.0.2
The notification sent when a pattern is matched on a serial port .
Status: current	Access: read-only
NOTIFICATION-TYPE

ogSerialUserNotification		1.3.6.1.4.1.25049.17.100.0.3
The notification sent when a user logs in or out of a serial console.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogHostPingNotification		1.3.6.1.4.1.25049.17.100.0.4
The notification sent when a host stops or resumes responding to a ping.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogHostServiceNotification		1.3.6.1.4.1.25049.17.100.0.5
The notification sent when a host service stops or resumes.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogHostUserNotification		1.3.6.1.4.1.25049.17.100.0.6
The notification sent when a user logs in or out of a network host.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogWebUserNotification		1.3.6.1.4.1.25049.17.100.0.7
The notification sent when a user logs in or out of the web interface.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogEmdTemperatureNotification		1.3.6.1.4.1.25049.17.100.0.8
The notification sent when a temperature event occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogEmdHumidityNotification		1.3.6.1.4.1.25049.17.100.0.9
The notification sent when a humidity event occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogEmdDioNotification		1.3.6.1.4.1.25049.17.100.0.10
The notification sent when a Digital I/O input event occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogPowerSupplyInputNotification		1.3.6.1.4.1.25049.17.100.0.11
The notification sent when a power supply voltage alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogPowerSupplyOutputNotification		1.3.6.1.4.1.25049.17.100.0.12
The notification sent when a power supply voltage alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogPowerSupplyTempNotification		1.3.6.1.4.1.25049.17.100.0.13
The notification sent when a power supply voltage alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogUpsNotification		1.3.6.1.4.1.25049.17.100.0.14
The notification sent when a UPS alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogUpsBatteryNotification		1.3.6.1.4.1.25049.17.100.0.15
The notification sent when a UPS battery alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogUpsInputNotification		1.3.6.1.4.1.25049.17.100.0.16
The notification sent when a UPS input alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogUpsOutputNotification		1.3.6.1.4.1.25049.17.100.0.17
The notification sent when a UPS output alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogRpcInputNotification		1.3.6.1.4.1.25049.17.100.0.18
The notification sent when a RPC input alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogRpcOutputNotification		1.3.6.1.4.1.25049.17.100.0.19
The notification sent when a RPC output alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogRpcOutletNotification		1.3.6.1.4.1.25049.17.100.0.20
The notification sent when a RPC output alarm occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

ogNetInterfaceNotification		1.3.6.1.4.1.25049.17.100.0.21
The notification sent when a network interface event occurs.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogCellDataNotification		1.3.6.1.4.1.25049.17.100.0.22
The notification sent when a cellular data alarm occurs.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogCellMessageNotification		1.3.6.1.4.1.25049.17.100.0.23
The notification sent when an SMS command alarm occurs.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogCellSignalNotification		1.3.6.1.4.1.25049.17.100.0.24
The notification sent when a cellular signal alarm occurs.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogCellApnNotification		1.3.6.1.4.1.25049.17.100.0.25
The notification sent when a cellular APN alarm occurs.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogCellTowerNotification		1.3.6.1.4.1.25049.17.100.0.26
The notification sent when a cellular tower alarm occurs.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogCellNetworkNotification		1.3.6.1.4.1.25049.17.100.0.27
The notification sent when a cellular network alarm occurs.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogWifiClientConnectNotification		1.3.6.1.4.1.25049.17.100.0.28
The notification sent when a wireless client connects or disconnects.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogWifiClientSignalNotification		1.3.6.1.4.1.25049.17.100.0.29
The notification sent when a wireless client signal changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogWifiApAssociationNotification		1.3.6.1.4.1.25049.17.100.0.30
The notification sent when a wireless client connects or disconnects to this AP.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogWifiApAuthNotification		1.3.6.1.4.1.25049.17.100.0.31
The notification sent when a wireless client fails to authenticate with this AP.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogDialPoolHealthNotification		1.3.6.1.4.1.25049.17.100.0.32
The notification sent when dial-pool health alarm occurs.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogCustomNotification		1.3.6.1.4.1.25049.17.100.0.33
The notification sent when a custom check is triggered.
Status: current	Access: read-only
NOTIFICATION-TYPE

ogStatus2Conformance		1.3.6.1.4.1.25049.17.65535
OBJECT IDENTIFIER

ogStatus2Compliances		1.3.6.1.4.1.25049.17.65535.1
OBJECT IDENTIFIER

ogStatus2Groups		1.3.6.1.4.1.25049.17.65535.2
OBJECT IDENTIFIER

ogStatus2Compliance		1.3.6.1.4.1.25049.17.65535.1.1
The compliance statement for the Opengear status MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

ogBasicStatusGroup		1.3.6.1.4.1.25049.17.65535.2.1
A collection of objects to retrieve Opengear statistics.
Status: current	Access: read-only
OBJECT-GROUP

ogBasicAlarmGroup		1.3.6.1.4.1.25049.17.65535.2.2
A collection of objects to report Opengear alarms.
Status: current	Access: read-only
OBJECT-GROUP

ogBasicNotificationGroup		1.3.6.1.4.1.25049.17.65535.2.3
A collection of notifications for the status system.
Status: current	Access: read-only
NOTIFICATION-GROUP