Nortel-MsCarrier-MscPassport-X25TraceRcvrMIB

File: Nortel-MsCarrier-MscPassport-X25TraceRcvrMIB.mib (74260 bytes)

Imported modules

RFC-1212	Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB	Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB	Nortel-MsCarrier-MscPassport-TraceBaseMIB

Imported symbols

OBJECT-TYPE	mscPassportMIBs	DisplayString
StorageType	RowStatus	Integer32
Unsigned32	Hex	NonReplicated
HexString	EnterpriseDateAndTime	DigitString
mscTraceIndex	mscTraceRcvr	mscTraceSessionIndex
mscTraceRcvrIndex	mscTraceSession

Defined Types

MscTraceRcvrX25RowStatusEntry
SEQUENCE
	mscTraceRcvrX25RowStatus	RowStatus
	mscTraceRcvrX25ComponentName	DisplayString
	mscTraceRcvrX25StorageType	StorageType
	mscTraceRcvrX25Index	NonReplicated

MscTraceRcvrX25DnaRowStatusEntry
SEQUENCE
	mscTraceRcvrX25DnaRowStatus	RowStatus
	mscTraceRcvrX25DnaComponentName	DisplayString
	mscTraceRcvrX25DnaStorageType	StorageType
	mscTraceRcvrX25DnaIndex	NonReplicated

MscTraceRcvrX25DnaAddressEntry
SEQUENCE
	mscTraceRcvrX25DnaNumberingPlanIndicator	INTEGER
	mscTraceRcvrX25DnaDataNetworkAddress	DigitString

MscTraceRcvrX25DnaOutgoingOptionsEntry
SEQUENCE
	mscTraceRcvrX25DnaOutCalls	INTEGER
	mscTraceRcvrX25DnaOutDefaultPriority	INTEGER
	mscTraceRcvrX25DnaOutIntl	INTEGER
	mscTraceRcvrX25DnaOutDefaultPathSensitivity	INTEGER
	mscTraceRcvrX25DnaOutDefaultPathReliability	INTEGER
	mscTraceRcvrX25DnaOutPathReliabilityOverRide	INTEGER
	mscTraceRcvrX25DnaOutPathReliabilitySignal	INTEGER
	mscTraceRcvrX25DnaOutAccess	INTEGER

MscTraceRcvrX25DnaIncomingOptionsEntry
SEQUENCE
	mscTraceRcvrX25DnaIncCalls	INTEGER

MscTraceRcvrX25DnaCallOptionsEntry
SEQUENCE
	mscTraceRcvrX25DnaPacketSizes	OCTET STRING
	mscTraceRcvrX25DnaDefaultRecvFrmNetworkPacketSize	INTEGER
	mscTraceRcvrX25DnaDefaultSendToNetworkPacketSize	INTEGER
	mscTraceRcvrX25DnaDefaultRecvFrmNetworkThruputClass	Unsigned32
	mscTraceRcvrX25DnaDefaultSendToNetworkThruputClass	Unsigned32
	mscTraceRcvrX25DnaDefaultRecvFrmNetworkWindowSize	Unsigned32
	mscTraceRcvrX25DnaDefaultSendToNetworkWindowSize	Unsigned32
	mscTraceRcvrX25DnaPacketSizeNegotiation	INTEGER
	mscTraceRcvrX25DnaCugFormat	INTEGER

MscTraceRcvrX25DnaCugRowStatusEntry
SEQUENCE
	mscTraceRcvrX25DnaCugRowStatus	RowStatus
	mscTraceRcvrX25DnaCugComponentName	DisplayString
	mscTraceRcvrX25DnaCugStorageType	StorageType
	mscTraceRcvrX25DnaCugIndex	Integer32

MscTraceRcvrX25DnaCugCugOptionsEntry
SEQUENCE
	mscTraceRcvrX25DnaCugType	INTEGER
	mscTraceRcvrX25DnaCugDnic	DigitString
	mscTraceRcvrX25DnaCugInterlockCode	Unsigned32
	mscTraceRcvrX25DnaCugPreferential	INTEGER
	mscTraceRcvrX25DnaCugOutCalls	INTEGER
	mscTraceRcvrX25DnaCugIncCalls	INTEGER
	mscTraceRcvrX25DnaCugPrivileged	INTEGER

MscTraceRcvrX25DcRowStatusEntry
SEQUENCE
	mscTraceRcvrX25DcRowStatus	RowStatus
	mscTraceRcvrX25DcComponentName	DisplayString
	mscTraceRcvrX25DcStorageType	StorageType
	mscTraceRcvrX25DcIndex	NonReplicated

MscTraceRcvrX25DcOptionsEntry
SEQUENCE
	mscTraceRcvrX25DcRemoteNpi	INTEGER
	mscTraceRcvrX25DcRemoteDna	DigitString
	mscTraceRcvrX25DcType	INTEGER
	mscTraceRcvrX25DcUserData	HexString

MscTraceSessionX25RowStatusEntry
SEQUENCE
	mscTraceSessionX25RowStatus	RowStatus
	mscTraceSessionX25ComponentName	DisplayString
	mscTraceSessionX25StorageType	StorageType
	mscTraceSessionX25Index	NonReplicated

MscTraceSessionX25VcRowStatusEntry
SEQUENCE
	mscTraceSessionX25VcRowStatus	RowStatus
	mscTraceSessionX25VcComponentName	DisplayString
	mscTraceSessionX25VcStorageType	StorageType
	mscTraceSessionX25VcIndex	NonReplicated

MscTraceSessionX25VcCadEntry
SEQUENCE
	mscTraceSessionX25VcType	INTEGER
	mscTraceSessionX25VcState	INTEGER
	mscTraceSessionX25VcPreviousState	INTEGER
	mscTraceSessionX25VcDiagnosticCode	Unsigned32
	mscTraceSessionX25VcPreviousDiagnosticCode	Unsigned32
	mscTraceSessionX25VcCalledNpi	INTEGER
	mscTraceSessionX25VcCalledDna	DigitString
	mscTraceSessionX25VcCalledLcn	Unsigned32
	mscTraceSessionX25VcCallingNpi	INTEGER
	mscTraceSessionX25VcCallingDna	DigitString
	mscTraceSessionX25VcCallingLcn	Unsigned32
	mscTraceSessionX25VcAccountingEnabled	INTEGER
	mscTraceSessionX25VcFastSelectCall	INTEGER
	mscTraceSessionX25VcLocalRxPktSize	INTEGER
	mscTraceSessionX25VcLocalTxPktSize	INTEGER
	mscTraceSessionX25VcLocalTxWindowSize	Unsigned32
	mscTraceSessionX25VcLocalRxWindowSize	Unsigned32
	mscTraceSessionX25VcPathReliability	INTEGER
	mscTraceSessionX25VcAccountingEnd	INTEGER
	mscTraceSessionX25VcPriority	INTEGER
	mscTraceSessionX25VcSegmentSize	Unsigned32
	mscTraceSessionX25VcSubnetTxPktSize	INTEGER
	mscTraceSessionX25VcSubnetTxWindowSize	Unsigned32
	mscTraceSessionX25VcSubnetRxPktSize	INTEGER
	mscTraceSessionX25VcSubnetRxWindowSize	Unsigned32
	mscTraceSessionX25VcMaxSubnetPktSize	Unsigned32
	mscTraceSessionX25VcTransferPriorityToNetwork	INTEGER
	mscTraceSessionX25VcTransferPriorityFromNetwork	INTEGER

MscTraceSessionX25VcIntdEntry
SEQUENCE
	mscTraceSessionX25VcCallReferenceNumber	Hex
	mscTraceSessionX25VcElapsedTimeTillNow	Unsigned32
	mscTraceSessionX25VcSegmentsRx	Unsigned32
	mscTraceSessionX25VcSegmentsSent	Unsigned32
	mscTraceSessionX25VcStartTime	EnterpriseDateAndTime
	mscTraceSessionX25VcCallReferenceNumberDecimal	Unsigned32

MscTraceSessionX25VcStatsEntry
SEQUENCE
	mscTraceSessionX25VcAckStackingTimeouts	Unsigned32
	mscTraceSessionX25VcOutOfRangeFrmFromSubnet	Unsigned32
	mscTraceSessionX25VcDuplicatesFromSubnet	Unsigned32
	mscTraceSessionX25VcFrmRetryTimeouts	Unsigned32
	mscTraceSessionX25VcPeakRetryQueueSize	Unsigned32
	mscTraceSessionX25VcPeakOoSeqQueueSize	Unsigned32
	mscTraceSessionX25VcPeakOoSeqFrmForwarded	Unsigned32
	mscTraceSessionX25VcPeakStackedAcksRx	Unsigned32
	mscTraceSessionX25VcSubnetRecoveries	Unsigned32
	mscTraceSessionX25VcWindowClosuresToSubnet	Unsigned32
	mscTraceSessionX25VcWindowClosuresFromSubnet	Unsigned32
	mscTraceSessionX25VcWrTriggers	Unsigned32

Defined Values

x25TraceRcvrMIB		1.3.6.1.4.1.562.36.2.2.62
OBJECT IDENTIFIER

mscTraceRcvrX25		1.3.6.1.4.1.562.36.2.1.106.2.2
OBJECT IDENTIFIER

mscTraceRcvrX25RowStatusTable		1.3.6.1.4.1.562.36.2.1.106.2.2.1
This entry controls the addition and deletion of mscTraceRcvrX25 components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25RowStatusEntry

mscTraceRcvrX25RowStatusEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.1.1
A single entry in the table represents a single mscTraceRcvrX25 component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25RowStatusEntry

mscTraceRcvrX25RowStatus		1.3.6.1.4.1.562.36.2.1.106.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscTraceRcvrX25 components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

mscTraceRcvrX25ComponentName		1.3.6.1.4.1.562.36.2.1.106.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscTraceRcvrX25StorageType		1.3.6.1.4.1.562.36.2.1.106.2.2.1.1.4
This variable represents the storage type value for the mscTraceRcvrX25 tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscTraceRcvrX25Index		1.3.6.1.4.1.562.36.2.1.106.2.2.1.1.10
This variable represents the index for the mscTraceRcvrX25 tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscTraceRcvrX25Dna		1.3.6.1.4.1.562.36.2.1.106.2.2.2
OBJECT IDENTIFIER

mscTraceRcvrX25DnaRowStatusTable		1.3.6.1.4.1.562.36.2.1.106.2.2.2.1
This entry controls the addition and deletion of mscTraceRcvrX25Dna components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25DnaRowStatusEntry

mscTraceRcvrX25DnaRowStatusEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.2.1.1
A single entry in the table represents a single mscTraceRcvrX25Dna component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25DnaRowStatusEntry

mscTraceRcvrX25DnaRowStatus		1.3.6.1.4.1.562.36.2.1.106.2.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscTraceRcvrX25Dna components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscTraceRcvrX25DnaComponentName		1.3.6.1.4.1.562.36.2.1.106.2.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscTraceRcvrX25DnaStorageType		1.3.6.1.4.1.562.36.2.1.106.2.2.2.1.1.4
This variable represents the storage type value for the mscTraceRcvrX25Dna tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscTraceRcvrX25DnaIndex		1.3.6.1.4.1.562.36.2.1.106.2.2.2.1.1.10
This variable represents the index for the mscTraceRcvrX25Dna tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscTraceRcvrX25DnaAddressTable		1.3.6.1.4.1.562.36.2.1.106.2.2.2.10
This group contains attributes common to all Dnas. This group is composed of two attributes which define a Dna. These attributes are used to interpret the format of the address digits.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25DnaAddressEntry

mscTraceRcvrX25DnaAddressEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.2.10.1
An entry in the mscTraceRcvrX25DnaAddressTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25DnaAddressEntry

mscTraceRcvrX25DnaNumberingPlanIndicator		1.3.6.1.4.1.562.36.2.1.106.2.2.2.10.1.1
This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to an E.164 or X.121 plan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	x121(0), e164(1)

mscTraceRcvrX25DnaDataNetworkAddress		1.3.6.1.4.1.562.36.2.1.106.2.2.2.10.1.2
The Dna attribute contains digits which form a unique identifier for the calling end of the trace connection. Dna digits are selected and assigned by network operators. The maximum Dna length is 15 digits.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DigitString	Size(1..15)

mscTraceRcvrX25DnaOutgoingOptionsTable		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11
This group defines call options for outgoing calls.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25DnaOutgoingOptionsEntry

mscTraceRcvrX25DnaOutgoingOptionsEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11.1
An entry in the mscTraceRcvrX25DnaOutgoingOptionsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25DnaOutgoingOptionsEntry

mscTraceRcvrX25DnaOutCalls		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11.1.1
This attribute specifies that outgoing calls (from the DTE to the network) can be made using this particular Dna component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disallowed(0), allowed(1)

mscTraceRcvrX25DnaOutDefaultPriority		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11.1.7
If this attribute is set to normal, then the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority when the priority is not specified in the call. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normal(0), high(1)

mscTraceRcvrX25DnaOutIntl		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11.1.8
This attribute specifies that outgoing international calls (from the DTE to the network) can be made using this particular Dna. This attribute also controls access to another numbering plan, and specifies that cross-numbering plan calls are allowed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disallowed(0), allowed(1)

mscTraceRcvrX25DnaOutDefaultPathSensitivity		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11.1.11
This attribute specifies the default class of routing (delay/ throughput) for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). This attribute, if set to a value of throughput, specifies that the default class of routing is throughput sensitive. If set to a value of delay, then the default class of routing is delay sensitive. This attribute is obsoleted. Please refer to defaultTransferPriority for the corresponding new attribute.
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	throughput(0), delay(1)

mscTraceRcvrX25DnaOutDefaultPathReliability		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11.1.14
This attribute specifies the default reliability class of routing for all calls (from the DTE to the network) using this particular Dna. The chosen default reliability class of routing normally applies to all packets (including the call packets) travelling into the network. A value of high specifies that packets are to be overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network, when errors are detected or during link congestion. The VC handles the duplication and disordering to ensure that packets are delivered to the interface in the proper sequence and without duplication.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	high(0), normal(1)

mscTraceRcvrX25DnaOutPathReliabilityOverRide		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11.1.15
This attribute specifies that the called end of the connection will not use the calling end provisioning data for reliability class of routing to override the provisioning data at the called end.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(0), yes(1)

mscTraceRcvrX25DnaOutPathReliabilitySignal		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11.1.16
This attribute specifies that reliability routing signaling is not used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disallowed(0), allowed(1)

mscTraceRcvrX25DnaOutAccess		1.3.6.1.4.1.562.36.2.1.106.2.2.2.11.1.17
This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disallowed(0), allowed(1)

mscTraceRcvrX25DnaIncomingOptionsTable		1.3.6.1.4.1.562.36.2.1.106.2.2.2.12
This group defines the call options for incoming calls.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25DnaIncomingOptionsEntry

mscTraceRcvrX25DnaIncomingOptionsEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.2.12.1
An entry in the mscTraceRcvrX25DnaIncomingOptionsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25DnaIncomingOptionsEntry

mscTraceRcvrX25DnaIncCalls		1.3.6.1.4.1.562.36.2.1.106.2.2.2.12.1.1
This attribute specifies that incoming calls (from the network to the DTE) cannot be made to this Dna.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disallowed(0), allowed(1)

mscTraceRcvrX25DnaCallOptionsTable		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13
The CallOptions group defines additional options for calls which are not specific to the direction of the call.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25DnaCallOptionsEntry

mscTraceRcvrX25DnaCallOptionsEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1
An entry in the mscTraceRcvrX25DnaCallOptionsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25DnaCallOptionsEntry

mscTraceRcvrX25DnaPacketSizes		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1.2
This attribute specifies the allowable packet sizes supported for calls using this Dna. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

mscTraceRcvrX25DnaDefaultRecvFrmNetworkPacketSize		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1.3
This attribute specifies the default local receive packet size from network to DTE for calls using this particular Dna.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)

mscTraceRcvrX25DnaDefaultSendToNetworkPacketSize		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1.4
This attribute specifies the default local send packet size from DTE to network for all calls using this particular Dna.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)

mscTraceRcvrX25DnaDefaultRecvFrmNetworkThruputClass		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1.5
This attribute specifies the default receive throughput class, (towards the interface) for all calls using this particular Dna.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..15

mscTraceRcvrX25DnaDefaultSendToNetworkThruputClass		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1.6
This attribute specifies the default send throughput class (towards the network) for all calls using this particular Dna.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..15

mscTraceRcvrX25DnaDefaultRecvFrmNetworkWindowSize		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1.7
This attribute specifies the default value for the number of data packets that can be send to the interface before any acknowledgment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..7

mscTraceRcvrX25DnaDefaultSendToNetworkWindowSize		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1.8
This attribute specifies the default value for the number of data packets that can be received from the interface before any acknowledgment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..7

mscTraceRcvrX25DnaPacketSizeNegotiation		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1.9
This attribute, if set to local specifies that packet sizes can be negotiated locally at the interface irrespective of the setting at the remote interface. If set to endtoEnd, then the packet size negotiation is between the local and remote interface (i.e. packet sizes are the same on both interfaces).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	endToEnd(0), local(1)

mscTraceRcvrX25DnaCugFormat		1.3.6.1.4.1.562.36.2.1.106.2.2.2.13.1.10
This attribute specifies the format to signal CUG indices as basic or extended. A basic CUG index format is two digits long. An extended CUG index format is four digits long.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	basic(0), extended(1)

mscTraceRcvrX25DnaCug		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2
OBJECT IDENTIFIER

mscTraceRcvrX25DnaCugRowStatusTable		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.1
This entry controls the addition and deletion of mscTraceRcvrX25DnaCug components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25DnaCugRowStatusEntry

mscTraceRcvrX25DnaCugRowStatusEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.1.1
A single entry in the table represents a single mscTraceRcvrX25DnaCug component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25DnaCugRowStatusEntry

mscTraceRcvrX25DnaCugRowStatus		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscTraceRcvrX25DnaCug components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

mscTraceRcvrX25DnaCugComponentName		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscTraceRcvrX25DnaCugStorageType		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.1.1.4
This variable represents the storage type value for the mscTraceRcvrX25DnaCug tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscTraceRcvrX25DnaCugIndex		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.1.1.10
This variable represents the index for the mscTraceRcvrX25DnaCug tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	1..1

mscTraceRcvrX25DnaCugCugOptionsTable		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.10
Attributes in this group define ClosedUserGroup options associated with interlockCode. Dnas with the same CUG (interlockCode) can make calls within this group. Various combinations of attributes are defined under this option which permit or prevent calls in the same CUG group.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25DnaCugCugOptionsEntry

mscTraceRcvrX25DnaCugCugOptionsEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.10.1
An entry in the mscTraceRcvrX25DnaCugCugOptionsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25DnaCugCugOptionsEntry

mscTraceRcvrX25DnaCugType		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.10.1.1
This attribute specifies the CUG type as either national or international. A national CUG has significance within the local network only. An international CUG has significance across network boundaries.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	national(0), international(1)

mscTraceRcvrX25DnaCugDnic		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.10.1.2
This attribute specifies the Data Network ID Code of the network that is administering the international CUG. This attribute is not used for a national CUG and should be left at its default value. The dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DigitString	Size(4)

mscTraceRcvrX25DnaCugInterlockCode		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.10.1.3
This attribute specifies a numeric identifier of a national or international closed user group. It is an arbitrary number. This attribute may also be called CUG in some descriptions. Dnas defined with this number can only make calls to Dnas defined with the same interlockCode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..65535

mscTraceRcvrX25DnaCugPreferential		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.10.1.4
This attribute specifies that this Cug is to be used on all outgoing calls to the X.25 trace receiver.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(0), yes(1)

mscTraceRcvrX25DnaCugOutCalls		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.10.1.5
This attribute specifies that outgoing calls (from the DTE into the network) can be made using this particular Cug.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disallowed(0), allowed(1)

mscTraceRcvrX25DnaCugIncCalls		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.10.1.6
This attribute specifies that incoming calls (from the network to the DTE) cannot be accepted using this Cug.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disallowed(0), allowed(1)

mscTraceRcvrX25DnaCugPrivileged		1.3.6.1.4.1.562.36.2.1.106.2.2.2.2.10.1.7
This attribute specifies that this Cug is privileged. For a call between two closed user group Dnas to connect, at least one Dna must have a privileged Cug.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(0), yes(1)

mscTraceRcvrX25Dc		1.3.6.1.4.1.562.36.2.1.106.2.2.3
OBJECT IDENTIFIER

mscTraceRcvrX25DcRowStatusTable		1.3.6.1.4.1.562.36.2.1.106.2.2.3.1
This entry controls the addition and deletion of mscTraceRcvrX25Dc components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25DcRowStatusEntry

mscTraceRcvrX25DcRowStatusEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.3.1.1
A single entry in the table represents a single mscTraceRcvrX25Dc component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25DcRowStatusEntry

mscTraceRcvrX25DcRowStatus		1.3.6.1.4.1.562.36.2.1.106.2.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscTraceRcvrX25Dc components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscTraceRcvrX25DcComponentName		1.3.6.1.4.1.562.36.2.1.106.2.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscTraceRcvrX25DcStorageType		1.3.6.1.4.1.562.36.2.1.106.2.2.3.1.1.4
This variable represents the storage type value for the mscTraceRcvrX25Dc tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscTraceRcvrX25DcIndex		1.3.6.1.4.1.562.36.2.1.106.2.2.3.1.1.10
This variable represents the index for the mscTraceRcvrX25Dc tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscTraceRcvrX25DcOptionsTable		1.3.6.1.4.1.562.36.2.1.106.2.2.3.10
The Options group defines attributes associated with the SVC direct call.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceRcvrX25DcOptionsEntry

mscTraceRcvrX25DcOptionsEntry		1.3.6.1.4.1.562.36.2.1.106.2.2.3.10.1
An entry in the mscTraceRcvrX25DcOptionsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceRcvrX25DcOptionsEntry

mscTraceRcvrX25DcRemoteNpi		1.3.6.1.4.1.562.36.2.1.106.2.2.3.10.1.3
This attribute indicates the numbering plan used for the remoteDna.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	x121(0), e164(1)

mscTraceRcvrX25DcRemoteDna		1.3.6.1.4.1.562.36.2.1.106.2.2.3.10.1.4
This attribute specifies the Data Network Address of the remote end of the connection. This is the DNA of the X.25 trace receiver which will receive the trace data.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DigitString	Size(1..15)

mscTraceRcvrX25DcType		1.3.6.1.4.1.562.36.2.1.106.2.2.3.10.1.6
This attribute specifies the type of call as switched. For a switched call, no information is defined at the remote end about the local end of the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	switched(0), permanentMaster(1), permanentSlave(2), permanentBackupSlave(3)

mscTraceRcvrX25DcUserData		1.3.6.1.4.1.562.36.2.1.106.2.2.3.10.1.8
This attribute contains the user data. It is a 0 to 16 byte length string which is appended to the call request packet that is presented to the called (destination) DTE.
Status: mandatory	Access: read-write
OBJECT-TYPE
	HexString	Size(0..16)

mscTraceSessionX25		1.3.6.1.4.1.562.36.2.1.106.3.2
OBJECT IDENTIFIER

mscTraceSessionX25RowStatusTable		1.3.6.1.4.1.562.36.2.1.106.3.2.1
* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscTraceSessionX25 components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceSessionX25RowStatusEntry

mscTraceSessionX25RowStatusEntry		1.3.6.1.4.1.562.36.2.1.106.3.2.1.1
A single entry in the table represents a single mscTraceSessionX25 component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceSessionX25RowStatusEntry

mscTraceSessionX25RowStatus		1.3.6.1.4.1.562.36.2.1.106.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscTraceSessionX25 components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscTraceSessionX25ComponentName		1.3.6.1.4.1.562.36.2.1.106.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscTraceSessionX25StorageType		1.3.6.1.4.1.562.36.2.1.106.3.2.1.1.4
This variable represents the storage type value for the mscTraceSessionX25 tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscTraceSessionX25Index		1.3.6.1.4.1.562.36.2.1.106.3.2.1.1.10
This variable represents the index for the mscTraceSessionX25 tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscTraceSessionX25Vc		1.3.6.1.4.1.562.36.2.1.106.3.2.2
OBJECT IDENTIFIER

mscTraceSessionX25VcRowStatusTable		1.3.6.1.4.1.562.36.2.1.106.3.2.2.1
* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscTraceSessionX25Vc components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceSessionX25VcRowStatusEntry

mscTraceSessionX25VcRowStatusEntry		1.3.6.1.4.1.562.36.2.1.106.3.2.2.1.1
A single entry in the table represents a single mscTraceSessionX25Vc component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceSessionX25VcRowStatusEntry

mscTraceSessionX25VcRowStatus		1.3.6.1.4.1.562.36.2.1.106.3.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscTraceSessionX25Vc components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscTraceSessionX25VcComponentName		1.3.6.1.4.1.562.36.2.1.106.3.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscTraceSessionX25VcStorageType		1.3.6.1.4.1.562.36.2.1.106.3.2.2.1.1.4
This variable represents the storage type value for the mscTraceSessionX25Vc tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscTraceSessionX25VcIndex		1.3.6.1.4.1.562.36.2.1.106.3.2.2.1.1.10
This variable represents the index for the mscTraceSessionX25Vc tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscTraceSessionX25VcCadTable		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10
* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group represents operational call data related to General Vc. It can be displayed only for General Vc which is created by application.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceSessionX25VcCadEntry

mscTraceSessionX25VcCadEntry		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1
An entry in the mscTraceSessionX25VcCadTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceSessionX25VcCadEntry

mscTraceSessionX25VcType		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.1
This attribute displays the type of call, pvc or svc. type is provided at provisioning time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	svc(0), pvc(1)

mscTraceSessionX25VcState		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)

mscTraceSessionX25VcPreviousState		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)

mscTraceSessionX25VcDiagnosticCode		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

mscTraceSessionX25VcPreviousDiagnosticCode		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

mscTraceSessionX25VcCalledNpi		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	x121(0), e164(1)

mscTraceSessionX25VcCalledDna		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DigitString	Size(1..15)

mscTraceSessionX25VcCalledLcn		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

mscTraceSessionX25VcCallingNpi		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	x121(0), e164(1)

mscTraceSessionX25VcCallingDna		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DigitString	Size(1..15)

mscTraceSessionX25VcCallingLcn		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.11
This attribute displays the Logical Channel Number of the calling end.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

mscTraceSessionX25VcAccountingEnabled		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(0), no(1)

mscTraceSessionX25VcFastSelectCall		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.13
This attribute displays that this is a fast select call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(0), yes(1)

mscTraceSessionX25VcLocalRxPktSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.14
This attribute displays the locally negotiated size of send packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)

mscTraceSessionX25VcLocalTxPktSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.15
This attribute displays the locally negotiated size of send packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)

mscTraceSessionX25VcLocalTxWindowSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.16
This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..127

mscTraceSessionX25VcLocalRxWindowSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.17
This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..127

mscTraceSessionX25VcPathReliability		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.19
This attribute displays the path reliability.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	high(0), normal(1)

mscTraceSessionX25VcAccountingEnd		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	callingEnd(0), calledEnd(1)

mscTraceSessionX25VcPriority		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.21
This attribute displays whether the call is a normal or a high priority call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), high(1)

mscTraceSessionX25VcSegmentSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4096

mscTraceSessionX25VcSubnetTxPktSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.23
This attribute displays the locally negotiated size of the data packets on this Vc.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)

mscTraceSessionX25VcSubnetTxWindowSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.24
This attribute displays the current send window size of Vc.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4096

mscTraceSessionX25VcSubnetRxPktSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.25
This attribute displays the locally negotiated size of receive packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)

mscTraceSessionX25VcSubnetRxWindowSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.26
This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4096

mscTraceSessionX25VcMaxSubnetPktSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.27
This attribute displays the maximum packet size allowed on Vc.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4096

mscTraceSessionX25VcTransferPriorityToNetwork		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.28
This attribute displays the priority in which data is transferred to the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), high(9)

mscTraceSessionX25VcTransferPriorityFromNetwork		1.3.6.1.4.1.562.36.2.1.106.3.2.2.10.1.29
This attribute displays the priority in which data is transferred from the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, and the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, and the routing metric is set to throughput.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), high(9)

mscTraceSessionX25VcIntdTable		1.3.6.1.4.1.562.36.2.1.106.3.2.2.11
* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceSessionX25VcIntdEntry

mscTraceSessionX25VcIntdEntry		1.3.6.1.4.1.562.36.2.1.106.3.2.2.11.1
An entry in the mscTraceSessionX25VcIntdTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceSessionX25VcIntdEntry

mscTraceSessionX25VcCallReferenceNumber		1.3.6.1.4.1.562.36.2.1.106.3.2.2.11.1.1
This attribute is obsolete. It is replaced by the callReferenceNumber attribute to display the call reference number in decimal. The SNMP reference for the callReferenceNumber attribute is callReferenceNumberDecimal.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Hex	0..16777215

mscTraceSessionX25VcElapsedTimeTillNow		1.3.6.1.4.1.562.36.2.1.106.3.2.2.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..16777215

mscTraceSessionX25VcSegmentsRx		1.3.6.1.4.1.562.36.2.1.106.3.2.2.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..16777215

mscTraceSessionX25VcSegmentsSent		1.3.6.1.4.1.562.36.2.1.106.3.2.2.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..16777215

mscTraceSessionX25VcStartTime		1.3.6.1.4.1.562.36.2.1.106.3.2.2.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	EnterpriseDateAndTime	Size(0\|19)

mscTraceSessionX25VcCallReferenceNumberDecimal		1.3.6.1.4.1.562.36.2.1.106.3.2.2.11.1.7
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

mscTraceSessionX25VcStatsTable		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12
* THIS TABLE CURRENTLY NOT IMPLEMENTED * ... Statistics(Stats) This group defines general attributes collected by general Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscTraceSessionX25VcStatsEntry

mscTraceSessionX25VcStatsEntry		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1
An entry in the mscTraceSessionX25VcStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscTraceSessionX25VcStatsEntry

mscTraceSessionX25VcAckStackingTimeouts		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.1
This attribute counts the number of ack stacking timer expiries. It is used as an indicator of the acknowledgment behavior across the subnet when ack stacking is in effect. If it expires often, usually this means end users will experience longer delay. The ack stacking timer specifies how long the Vc will wait before finally sending the subnet acknowledgment. if this attribute is set to a value of 0, then the Vc will automatically return acknowledgment packets without delay. If this attribute is set to a value other than zero, then the Vc will wait for this amount of time in an attempt to piggyback the acknowledgment packet on another credit or data packet. If the Vc cannot piggyback the acknowledgment packet within this time, then the packet is returned without piggybacking.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcOutOfRangeFrmFromSubnet		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.2
This attribute counts the number of subnet frames discarded due to the sequence number being out of range. Two Categories apply for the General Vc 1) lost Acks (previous Range) 2) unexpected Packets (next Range) Vc internally maintains its own sequence number of packet order and sequencing. Due to packet retransmission, Vc may receive duplicate packets that have the same Vc internal sequence number. Only 1 copy is accepted by the Vc and other copies of the same packets are detected through this count. This attribute can be used to record the frequency of packet retransmission due to Vc and other part of the subnet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcDuplicatesFromSubnet		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.3
This attribute counts the number of subnet packets discarded due to duplication. It is used to detect software error fault or duplication caused by retransmitting.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcFrmRetryTimeouts		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.4
This attribute counts the number of frames which have retransmission time-out. If packets from Vc into the subnet are discarded by the subnet, the source Vc will not receive any acknowledgment. The retransmission timer then expires and packets will be retransmitted again. Note that the Vc idle probe may be retransmitted and is included in this count. This statistics does not show the distribution of how many times packets are retransmitted (e.g. first retransmission results in successful packet forwarding).
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcPeakRetryQueueSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.5
This attribute indicates the peak size of the retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest body of unacknowledged packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcPeakOoSeqQueueSize		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.6
This attribute indicates the peak size of the out of sequence queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcPeakOoSeqFrmForwarded		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.7
This attribute indicates the peak size of the sequence packet queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets, which by the receipt of an expected packet have been transformed to expected packets. The number of times this peak is reached is not recorded as it is traffic dependent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcPeakStackedAcksRx		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.8
This attribute indicates the peak size of wait acks. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest collective acknowledgment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcSubnetRecoveries		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.9
This attribute counts the number of successful Vc recovery attempts. This attribute is used as an indicator of how many times the Vc path is broken but can be recovered. This attribute is useful to record the number of network path failures.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcWindowClosuresToSubnet		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.10
This attribute counts the number of window closures to subnet. A packet may have been sent into the subnet but its acknowledgment from the remote Vc has not yet been received. This is a 8 bit sequence number.This number is useful in detecting whether the Vc is sending any packet into the subnet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcWindowClosuresFromSubnet		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.11
This attribute counts the number of window closures from subnet. This attribute is useful in detecting whether the Vc is receiving any packet from the subnet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

mscTraceSessionX25VcWrTriggers		1.3.6.1.4.1.562.36.2.1.106.3.2.2.12.1.12
This attribute displays the number of times the Vc stays within the W-R region. The W-R region is a value used to determined the timing of credit transmission. Should the current window size be beneath this value, the credits will be transmitted immediately. Otherwise, they will be transmitted later with actual data. The wrTriggers statistic is therefore used to analyze the flow control and credit mechanism.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..5000

x25TraceRcvrGroup		1.3.6.1.4.1.562.36.2.2.62.1
OBJECT IDENTIFIER

x25TraceRcvrGroupCA		1.3.6.1.4.1.562.36.2.2.62.1.1
OBJECT IDENTIFIER

x25TraceRcvrGroupCA02		1.3.6.1.4.1.562.36.2.2.62.1.1.3
OBJECT IDENTIFIER

x25TraceRcvrGroupCA02A		1.3.6.1.4.1.562.36.2.2.62.1.1.3.2
OBJECT IDENTIFIER

x25TraceRcvrCapabilities		1.3.6.1.4.1.562.36.2.2.62.3
OBJECT IDENTIFIER

x25TraceRcvrCapabilitiesCA		1.3.6.1.4.1.562.36.2.2.62.3.1
OBJECT IDENTIFIER

x25TraceRcvrCapabilitiesCA02		1.3.6.1.4.1.562.36.2.2.62.3.1.3
OBJECT IDENTIFIER

x25TraceRcvrCapabilitiesCA02A		1.3.6.1.4.1.562.36.2.2.62.3.1.3.2
OBJECT IDENTIFIER