Nortel-MsCarrier-MscPassport-VnetNisSigMIB

File: Nortel-MsCarrier-MscPassport-VnetNisSigMIB.mib (40544 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs DisplayString
StorageType RowStatus Unsigned32
NonReplicated Link mscSigChan
mscSigChanIndex

Defined Types

MscSigChanNisRowStatusEntry  
SEQUENCE    
  mscSigChanNisRowStatus RowStatus
  mscSigChanNisComponentName DisplayString
  mscSigChanNisStorageType StorageType
  mscSigChanNisIndex NonReplicated

MscSigChanNisL2Entry  
SEQUENCE    
  mscSigChanNisT23 Unsigned32
  mscSigChanNisT200 Unsigned32
  mscSigChanNisN200 Unsigned32
  mscSigChanNisT203 Unsigned32
  mscSigChanNisCircuitSwitchedK Unsigned32

MscSigChanNisL3Entry  
SEQUENCE    
  mscSigChanNisT309 Unsigned32
  mscSigChanNisT310 Unsigned32

MscSigChanNisProvEntry  
SEQUENCE    
  mscSigChanNisSide INTEGER
  mscSigChanNisMaxNonCallConcurrent Unsigned32

MscSigChanNisStateEntry  
SEQUENCE    
  mscSigChanNisAdminState INTEGER
  mscSigChanNisOperationalState INTEGER
  mscSigChanNisUsageState INTEGER

MscSigChanNisStatsEntry  
SEQUENCE    
  mscSigChanNisTotalCallsToIf Unsigned32
  mscSigChanNisTotalCallsFromIf Unsigned32
  mscSigChanNisNonCallAssocSessionsToIf Unsigned32
  mscSigChanNisNonCallAssocSessionsFromIf Unsigned32

MscSigChanNisOperEntry  
SEQUENCE    
  mscSigChanNisActiveChannels Unsigned32
  mscSigChanNisActiveVoiceChannels Unsigned32
  mscSigChanNisActiveDataChannels Unsigned32
  mscSigChanNisPeakActiveChannels Unsigned32
  mscSigChanNisPeakActiveVoiceChannels Unsigned32
  mscSigChanNisPeakActiveDataChannels Unsigned32
  mscSigChanNisDChanStatus INTEGER

MscSigChanNisToolsEntry  
SEQUENCE    
  mscSigChanNisTracing OCTET STRING

MscSigChanNisNisSpecificProvEntry  
SEQUENCE    
  mscSigChanNisChanMaintenanceHandling INTEGER

MscSigChanNisFramerRowStatusEntry  
SEQUENCE    
  mscSigChanNisFramerRowStatus RowStatus
  mscSigChanNisFramerComponentName DisplayString
  mscSigChanNisFramerStorageType StorageType
  mscSigChanNisFramerIndex NonReplicated

MscSigChanNisFramerProvEntry  
SEQUENCE    
  mscSigChanNisFramerInterfaceName Link

MscSigChanNisFramerStateEntry  
SEQUENCE    
  mscSigChanNisFramerAdminState INTEGER
  mscSigChanNisFramerOperationalState INTEGER
  mscSigChanNisFramerUsageState INTEGER

MscSigChanNisFramerStatsEntry  
SEQUENCE    
  mscSigChanNisFramerFrmToIf Unsigned32
  mscSigChanNisFramerFrmFromIf Unsigned32
  mscSigChanNisFramerOctetFromIf Unsigned32
  mscSigChanNisFramerAborts Unsigned32
  mscSigChanNisFramerCrcErrors Unsigned32
  mscSigChanNisFramerLrcErrors Unsigned32
  mscSigChanNisFramerNonOctetErrors Unsigned32
  mscSigChanNisFramerOverruns Unsigned32
  mscSigChanNisFramerUnderruns Unsigned32
  mscSigChanNisFramerLargeFrmErrors Unsigned32

Defined Values

vnetNisSigMIB 1.3.6.1.4.1.562.36.2.2.112
OBJECT IDENTIFIER    

mscSigChanNis 1.3.6.1.4.1.562.36.2.1.115.8
OBJECT IDENTIFIER    

mscSigChanNisRowStatusTable 1.3.6.1.4.1.562.36.2.1.115.8.1
This entry controls the addition and deletion of mscSigChanNis components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisRowStatusEntry

mscSigChanNisRowStatusEntry 1.3.6.1.4.1.562.36.2.1.115.8.1.1
A single entry in the table represents a single mscSigChanNis component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisRowStatusEntry  

mscSigChanNisRowStatus 1.3.6.1.4.1.562.36.2.1.115.8.1.1.1
This variable is used as the basis for SNMP naming of mscSigChanNis components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscSigChanNisComponentName 1.3.6.1.4.1.562.36.2.1.115.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscSigChanNisStorageType 1.3.6.1.4.1.562.36.2.1.115.8.1.1.4
This variable represents the storage type value for the mscSigChanNis tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscSigChanNisIndex 1.3.6.1.4.1.562.36.2.1.115.8.1.1.10
This variable represents the index for the mscSigChanNis tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscSigChanNisL2Table 1.3.6.1.4.1.562.36.2.1.115.8.11
This group specifies the provisionable layer 2 attributes of the Q.931 ITU-T protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisL2Entry

mscSigChanNisL2Entry 1.3.6.1.4.1.562.36.2.1.115.8.11.1
An entry in the mscSigChanNisL2Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisL2Entry  

mscSigChanNisT23 1.3.6.1.4.1.562.36.2.1.115.8.11.1.1
This attribute specifies the layer 2 enable request timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

mscSigChanNisT200 1.3.6.1.4.1.562.36.2.1.115.8.11.1.2
This attribute specifies the maximum time between a layer 2 frame and its acknowledgment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..20  

mscSigChanNisN200 1.3.6.1.4.1.562.36.2.1.115.8.11.1.3
This attribute specifies the maximum number of re-transmissions of a layer 2 frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8  

mscSigChanNisT203 1.3.6.1.4.1.562.36.2.1.115.8.11.1.4
This attribute specifies the maximum time for which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 2..40  

mscSigChanNisCircuitSwitchedK 1.3.6.1.4.1.562.36.2.1.115.8.11.1.6
This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP supporting primary rate (64kbit/sec) signalling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..127  

mscSigChanNisL3Table 1.3.6.1.4.1.562.36.2.1.115.8.12
This group represents the provisionable Layer 3 timer attributes of a the Nis signalling protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisL3Entry

mscSigChanNisL3Entry 1.3.6.1.4.1.562.36.2.1.115.8.12.1
An entry in the mscSigChanNisL3Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisL3Entry  

mscSigChanNisT309 1.3.6.1.4.1.562.36.2.1.115.8.12.1.3
This attribute specifies the data link failure timer; used to ride out temporary failures.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 15..120  

mscSigChanNisT310 1.3.6.1.4.1.562.36.2.1.115.8.12.1.4
This attribute specifies the call proceeding state timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 10..120  

mscSigChanNisProvTable 1.3.6.1.4.1.562.36.2.1.115.8.13
This group defines the general options of the D-channel signalling link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisProvEntry

mscSigChanNisProvEntry 1.3.6.1.4.1.562.36.2.1.115.8.13.1
An entry in the mscSigChanNisProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisProvEntry  

mscSigChanNisSide 1.3.6.1.4.1.562.36.2.1.115.8.13.1.1
This attribute specifies whether the interface is the network or user side of the connection. The parameter applies to both the layer 2 and layer 3 of the interface. If this attribute is set to network, then the interface is master during channel negotiation. If this attribute is set to user, then the interface is slave during channel negotiation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(1), user(2)  

mscSigChanNisMaxNonCallConcurrent 1.3.6.1.4.1.562.36.2.1.115.8.13.1.2
This attribute specifies the maximum number of simultaneous active non-call messages that are allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

mscSigChanNisStateTable 1.3.6.1.4.1.562.36.2.1.115.8.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisStateEntry

mscSigChanNisStateEntry 1.3.6.1.4.1.562.36.2.1.115.8.14.1
An entry in the mscSigChanNisStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisStateEntry  

mscSigChanNisAdminState 1.3.6.1.4.1.562.36.2.1.115.8.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscSigChanNisOperationalState 1.3.6.1.4.1.562.36.2.1.115.8.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscSigChanNisUsageState 1.3.6.1.4.1.562.36.2.1.115.8.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscSigChanNisStatsTable 1.3.6.1.4.1.562.36.2.1.115.8.15
This group provides the operational components for the NisSig component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisStatsEntry

mscSigChanNisStatsEntry 1.3.6.1.4.1.562.36.2.1.115.8.15.1
An entry in the mscSigChanNisStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisStatsEntry  

mscSigChanNisTotalCallsToIf 1.3.6.1.4.1.562.36.2.1.115.8.15.1.2
This attribute counts the total number of calls that have been made to the interface. The value wraps when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisTotalCallsFromIf 1.3.6.1.4.1.562.36.2.1.115.8.15.1.3
This attribute counts the total number of calls from the interface. The value wraps when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisNonCallAssocSessionsToIf 1.3.6.1.4.1.562.36.2.1.115.8.15.1.4
This attribute counts the total number of non-call associated sessions to the interface. The value wraps when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisNonCallAssocSessionsFromIf 1.3.6.1.4.1.562.36.2.1.115.8.15.1.5
This attribute counts the total number of non-call associated sessions from the interface. The value wraps when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisOperTable 1.3.6.1.4.1.562.36.2.1.115.8.16
This group provides the operational attributes for the NisSig protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisOperEntry

mscSigChanNisOperEntry 1.3.6.1.4.1.562.36.2.1.115.8.16.1
An entry in the mscSigChanNisOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisOperEntry  

mscSigChanNisActiveChannels 1.3.6.1.4.1.562.36.2.1.115.8.16.1.1
This attribute indicates the number of currently active channels. This includes data and voice channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanNisActiveVoiceChannels 1.3.6.1.4.1.562.36.2.1.115.8.16.1.2
This attribute indicates the number of channels that are currently carrying voice.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanNisActiveDataChannels 1.3.6.1.4.1.562.36.2.1.115.8.16.1.3
This attribute indicates the number of channels that are currently carrying data. This does not include modem data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanNisPeakActiveChannels 1.3.6.1.4.1.562.36.2.1.115.8.16.1.4
This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanNisPeakActiveVoiceChannels 1.3.6.1.4.1.562.36.2.1.115.8.16.1.5
This attribute indicates the maximum number of voice channels that have been active on this signalling channel during the last polling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanNisPeakActiveDataChannels 1.3.6.1.4.1.562.36.2.1.115.8.16.1.6
This attribute indicates the maximum number of data channels that have been active on this signalling channel during the last polling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanNisDChanStatus 1.3.6.1.4.1.562.36.2.1.115.8.16.1.7
This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgement from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being rei-initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5)  

mscSigChanNisToolsTable 1.3.6.1.4.1.562.36.2.1.115.8.17
This contains a series of operational attributes which turn on and off several kinds of tracing.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisToolsEntry

mscSigChanNisToolsEntry 1.3.6.1.4.1.562.36.2.1.115.8.17.1
An entry in the mscSigChanNisToolsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisToolsEntry  

mscSigChanNisTracing 1.3.6.1.4.1.562.36.2.1.115.8.17.1.1
This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list the debug stream in in its data streams (ex. set nmis telnet session/1 dataStreams debug). Different types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and will slow down call processing on a heavily loaded card. If there is message block exhaustion tracing will be suspended for a period and then automatically reenabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occuring. Protocol errors are also reported in summary form as alarms. q931Summary - Summary of the Q.931 messages on the signalling link, including certain call details (calling number, called number, release codes). q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscSigChanNisNisSpecificProvTable 1.3.6.1.4.1.562.36.2.1.115.8.18
This group provides NIS protocol specific provisioning.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisNisSpecificProvEntry

mscSigChanNisNisSpecificProvEntry 1.3.6.1.4.1.562.36.2.1.115.8.18.1
An entry in the mscSigChanNisNisSpecificProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisNisSpecificProvEntry  

mscSigChanNisChanMaintenanceHandling 1.3.6.1.4.1.562.36.2.1.115.8.18.1.1
This attribute specifies how channel maintenance events should be handled upon startup. Channel maintenance events include locking and unlocking a channel or channel registration. The decision is either to send individual channel RESTART messages, SERVICE messages, or nothing. Note that channel registration only occurs after the global interface restart at startup. Setting this attribute to enable SERVICE messages ensures that SERVICE messages occur at startup and whenever a channel goes into or out of service. If this attribute is not set to enable SERVICE messaging, a RESTART is always sent on unlocking a channel. globalOnStartup provides the minimum required functionality at startup, without any individual channel confirmation. Note that when this is set, channel RESTART is still used for channel unlock. globalOnStartup applies to SigChan startup only. serviceMessage enables sending and receiving SERVICE messages. If this attribute is set to serviceMessage, SERVICE messages are used for channel maintenance on channel lock, channel unlock, and startup. restartMessage specifies that individual channel RESTARTs when the SigChan starts up. If this attribute is set to restartMessage, a RESTART message is used to send at startup and channel unlock.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER globalOnStartup(0), serviceMessage(1), restartMessage(2)  

mscSigChanNisFramer 1.3.6.1.4.1.562.36.2.1.115.8.2
OBJECT IDENTIFIER    

mscSigChanNisFramerRowStatusTable 1.3.6.1.4.1.562.36.2.1.115.8.2.1
This entry controls the addition and deletion of mscSigChanNisFramer components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisFramerRowStatusEntry

mscSigChanNisFramerRowStatusEntry 1.3.6.1.4.1.562.36.2.1.115.8.2.1.1
A single entry in the table represents a single mscSigChanNisFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisFramerRowStatusEntry  

mscSigChanNisFramerRowStatus 1.3.6.1.4.1.562.36.2.1.115.8.2.1.1.1
This variable is used as the basis for SNMP naming of mscSigChanNisFramer components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscSigChanNisFramerComponentName 1.3.6.1.4.1.562.36.2.1.115.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscSigChanNisFramerStorageType 1.3.6.1.4.1.562.36.2.1.115.8.2.1.1.4
This variable represents the storage type value for the mscSigChanNisFramer tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscSigChanNisFramerIndex 1.3.6.1.4.1.562.36.2.1.115.8.2.1.1.10
This variable represents the index for the mscSigChanNisFramer tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscSigChanNisFramerProvTable 1.3.6.1.4.1.562.36.2.1.115.8.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisFramerProvEntry

mscSigChanNisFramerProvEntry 1.3.6.1.4.1.562.36.2.1.115.8.2.10.1
An entry in the mscSigChanNisFramerProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisFramerProvEntry  

mscSigChanNisFramerInterfaceName 1.3.6.1.4.1.562.36.2.1.115.8.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

mscSigChanNisFramerStateTable 1.3.6.1.4.1.562.36.2.1.115.8.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisFramerStateEntry

mscSigChanNisFramerStateEntry 1.3.6.1.4.1.562.36.2.1.115.8.2.12.1
An entry in the mscSigChanNisFramerStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisFramerStateEntry  

mscSigChanNisFramerAdminState 1.3.6.1.4.1.562.36.2.1.115.8.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscSigChanNisFramerOperationalState 1.3.6.1.4.1.562.36.2.1.115.8.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscSigChanNisFramerUsageState 1.3.6.1.4.1.562.36.2.1.115.8.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscSigChanNisFramerStatsTable 1.3.6.1.4.1.562.36.2.1.115.8.2.13
This group contains the operational statistics data for a Framer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanNisFramerStatsEntry

mscSigChanNisFramerStatsEntry 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1
An entry in the mscSigChanNisFramerStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanNisFramerStatsEntry  

mscSigChanNisFramerFrmToIf 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisFramerFrmFromIf 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.2
This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisFramerOctetFromIf 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.3
The number of bytes received from the link interface by Framer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisFramerAborts 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.4
This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisFramerCrcErrors 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.5
This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisFramerLrcErrors 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.6
This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisFramerNonOctetErrors 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.7
This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisFramerOverruns 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisFramerUnderruns 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.9
This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanNisFramerLargeFrmErrors 1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.10
This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vnetNisSigGroup 1.3.6.1.4.1.562.36.2.2.112.1
OBJECT IDENTIFIER    

vnetNisSigGroupCA 1.3.6.1.4.1.562.36.2.2.112.1.1
OBJECT IDENTIFIER    

vnetNisSigGroupCA02 1.3.6.1.4.1.562.36.2.2.112.1.1.3
OBJECT IDENTIFIER    

vnetNisSigGroupCA02A 1.3.6.1.4.1.562.36.2.2.112.1.1.3.2
OBJECT IDENTIFIER    

vnetNisSigCapabilities 1.3.6.1.4.1.562.36.2.2.112.3
OBJECT IDENTIFIER    

vnetNisSigCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.112.3.1
OBJECT IDENTIFIER    

vnetNisSigCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.112.3.1.3
OBJECT IDENTIFIER    

vnetNisSigCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.112.3.1.3.2
OBJECT IDENTIFIER    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor