Nortel-MsCarrier-MscPassport-IpxMIB

File: Nortel-MsCarrier-MscPassport-IpxMIB.mib (132330 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-VirtualRouterMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs Counter32
PhysAddress DisplayString StorageType
RowStatus Gauge32 Integer32
Unsigned32 AsciiString DashedHexString
NonReplicated Hex AsciiStringIndex
mscVrIndex mscVrPp mscVrPpIndex
mscVr

Defined Types

MscVrPpIpxPRowStatusEntry  
SEQUENCE    
  mscVrPpIpxPRowStatus RowStatus
  mscVrPpIpxPComponentName DisplayString
  mscVrPpIpxPStorageType StorageType
  mscVrPpIpxPIndex INTEGER

MscVrPpIpxPAdminControlEntry  
SEQUENCE    
  mscVrPpIpxPSnmpAdminStatus INTEGER

MscVrPpIpxPProvEntry  
SEQUENCE    
  mscVrPpIpxPNetworkNumberProv DashedHexString
  mscVrPpIpxPDefaultType INTEGER
  mscVrPpIpxPBroadcastInhibit INTEGER

MscVrPpIpxPSresProvEntry  
SEQUENCE    
  mscVrPpIpxPSourceRouteEndStationSupport INTEGER

MscVrPpIpxPStateEntry  
SEQUENCE    
  mscVrPpIpxPAdminState INTEGER
  mscVrPpIpxPOperationalState INTEGER
  mscVrPpIpxPUsageState INTEGER

MscVrPpIpxPOperStatusEntry  
SEQUENCE    
  mscVrPpIpxPSnmpOperStatus INTEGER

MscVrPpIpxPOperEntry  
SEQUENCE    
  mscVrPpIpxPType INTEGER
  mscVrPpIpxPEncapsulation INTEGER
  mscVrPpIpxPNetworkNumber DashedHexString
  mscVrPpIpxPNode DashedHexString

MscVrPpIpxPStatsEntry  
SEQUENCE    
  mscVrPpIpxPStateChanges Counter32
  mscVrPpIpxPInReceives Counter32
  mscVrPpIpxPForwarded Counter32

MscVrPpIpxPRipPRowStatusEntry  
SEQUENCE    
  mscVrPpIpxPRipPRowStatus RowStatus
  mscVrPpIpxPRipPComponentName DisplayString
  mscVrPpIpxPRipPStorageType StorageType
  mscVrPpIpxPRipPIndex NonReplicated

MscVrPpIpxPRipPStatsEntry  
SEQUENCE    
  mscVrPpIpxPRipPInPackets Counter32
  mscVrPpIpxPRipPInRequests Counter32
  mscVrPpIpxPRipPInResponses Counter32
  mscVrPpIpxPRipPOutPackets Counter32
  mscVrPpIpxPRipPOutRequests Counter32
  mscVrPpIpxPRipPOutResponses Counter32
  mscVrPpIpxPRipPIncorrectPackets Counter32

MscVrPpIpxPSapPRowStatusEntry  
SEQUENCE    
  mscVrPpIpxPSapPRowStatus RowStatus
  mscVrPpIpxPSapPComponentName DisplayString
  mscVrPpIpxPSapPStorageType StorageType
  mscVrPpIpxPSapPIndex NonReplicated

MscVrPpIpxPSapPStatsEntry  
SEQUENCE    
  mscVrPpIpxPSapPInPackets Counter32
  mscVrPpIpxPSapPInRequests Counter32
  mscVrPpIpxPSapPInResponses Counter32
  mscVrPpIpxPSapPOutPackets Counter32
  mscVrPpIpxPSapPOutRequests Counter32
  mscVrPpIpxPSapPOutResponses Counter32
  mscVrPpIpxPSapPIncorrectPackets Counter32

MscVrPpIpxPIWPRowStatusEntry  
SEQUENCE    
  mscVrPpIpxPIWPRowStatus RowStatus
  mscVrPpIpxPIWPComponentName DisplayString
  mscVrPpIpxPIWPStorageType StorageType
  mscVrPpIpxPIWPRemoteStationIdentifierIndex DashedHexString

MscVrPpIpxPIWPOperEntry  
SEQUENCE    
  mscVrPpIpxPIWPNeighbourRouterName AsciiString
  mscVrPpIpxPIWPNeighbourInternalNetworkNumber DashedHexString
  mscVrPpIpxPIWPInitFails Counter32

MscVrPpIpxPNetSentryPRowStatusEntry  
SEQUENCE    
  mscVrPpIpxPNetSentryPRowStatus RowStatus
  mscVrPpIpxPNetSentryPComponentName DisplayString
  mscVrPpIpxPNetSentryPStorageType StorageType
  mscVrPpIpxPNetSentryPIndex NonReplicated

MscVrPpIpxPNetSentryPProvEntry  
SEQUENCE    
  mscVrPpIpxPNetSentryPInComingFilter AsciiString
  mscVrPpIpxPNetSentryPOutGoingFilter AsciiString

MscVrIpxRowStatusEntry  
SEQUENCE    
  mscVrIpxRowStatus RowStatus
  mscVrIpxComponentName DisplayString
  mscVrIpxStorageType StorageType
  mscVrIpxIndex NonReplicated

MscVrIpxAdminControlEntry  
SEQUENCE    
  mscVrIpxSnmpAdminStatus INTEGER

MscVrIpxProvEntry  
SEQUENCE    
  mscVrIpxNetworkNumber DashedHexString
  mscVrIpxMaxPathSplits Unsigned32
  mscVrIpxMaxHops Unsigned32
  mscVrIpxRipUpdateInterval Unsigned32
  mscVrIpxSapUpdateInterval Unsigned32
  mscVrIpxControlDelay Unsigned32
  mscVrIpxUpdateDelay Unsigned32
  mscVrIpxRipAgeMultiplier Unsigned32
  mscVrIpxSapAgeMultiplier Unsigned32
  mscVrIpxDamping INTEGER
  mscVrIpxRipMaxDampedGeneralRequests Unsigned32
  mscVrIpxRipMaxDampedSpecificRequests Unsigned32
  mscVrIpxSapMaxDampedGeneralRequests Unsigned32
  mscVrIpxSapMaxDampedSpecificRequests Unsigned32
  mscVrIpxInitialGeneralRequests INTEGER
  mscVrIpxHoldDownInterval Unsigned32

MscVrIpxStateEntry  
SEQUENCE    
  mscVrIpxAdminState INTEGER
  mscVrIpxOperationalState INTEGER
  mscVrIpxUsageState INTEGER

MscVrIpxOperStatusEntry  
SEQUENCE    
  mscVrIpxSnmpOperStatus INTEGER

MscVrIpxOperEntry  
SEQUENCE    
  mscVrIpxProtocolPortCount Unsigned32
  mscVrIpxDestinationCount Unsigned32
  mscVrIpxServicesCount Unsigned32

MscVrIpxStatsEntry  
SEQUENCE    
  mscVrIpxInReceives Counter32
  mscVrIpxInHeaderErrors Counter32
  mscVrIpxInUnknownSocket Counter32
  mscVrIpxInDiscards Counter32
  mscVrIpxInBadChecksums Counter32
  mscVrIpxInDelivers Counter32
  mscVrIpxNoRoutes Counter32
  mscVrIpxOutRequests Counter32
  mscVrIpxOutMalformedRequests Counter32
  mscVrIpxOutDiscards Counter32
  mscVrIpxOutPackets Counter32
  mscVrIpxInTooManyHops Counter32
  mscVrIpxInFiltered Counter32
  mscVrIpxInNetBIOS Counter32
  mscVrIpxForwarded Counter32
  mscVrIpxOutFiltered Counter32

MscVrIpxRipRowStatusEntry  
SEQUENCE    
  mscVrIpxRipRowStatus RowStatus
  mscVrIpxRipComponentName DisplayString
  mscVrIpxRipStorageType StorageType
  mscVrIpxRipIndex NonReplicated

MscVrIpxRipStatsEntry  
SEQUENCE    
  mscVrIpxRipRipIn Counter32
  mscVrIpxRipRipOut Counter32
  mscVrIpxRipRipIncorrectPackets Counter32

MscVrIpxRipRFltrRowStatusEntry  
SEQUENCE    
  mscVrIpxRipRFltrRowStatus RowStatus
  mscVrIpxRipRFltrComponentName DisplayString
  mscVrIpxRipRFltrStorageType StorageType
  mscVrIpxRipRFltrIdentifierIndex Integer32

MscVrIpxRipRFltrProvEntry  
SEQUENCE    
  mscVrIpxRipRFltrHops AsciiString
  mscVrIpxRipRFltrTicks AsciiString
  mscVrIpxRipRFltrNetworkNumber AsciiString
  mscVrIpxRipRFltrNode AsciiString
  mscVrIpxRipRFltrPort AsciiString
  mscVrIpxRipRFltrDisposition INTEGER

MscVrIpxRipRFltrOperEntry  
SEQUENCE    
  mscVrIpxRipRFltrNumberOfApplyEntries Gauge32

MscVrIpxRipRipAppRowStatusEntry  
SEQUENCE    
  mscVrIpxRipRipAppRowStatus RowStatus
  mscVrIpxRipRipAppComponentName DisplayString
  mscVrIpxRipRipAppStorageType StorageType
  mscVrIpxRipRipAppProtocolPortNameIndex AsciiStringIndex
  mscVrIpxRipRipAppFilterIdentifierIndex Integer32

MscVrIpxRipRipAppProvEntry  
SEQUENCE    
  mscVrIpxRipRipAppDirection INTEGER

MscVrIpxSapRowStatusEntry  
SEQUENCE    
  mscVrIpxSapRowStatus RowStatus
  mscVrIpxSapComponentName DisplayString
  mscVrIpxSapStorageType StorageType
  mscVrIpxSapIndex NonReplicated

MscVrIpxSapStatsEntry  
SEQUENCE    
  mscVrIpxSapSapIn Counter32
  mscVrIpxSapSapOut Counter32
  mscVrIpxSapSapIncorrectPackets Counter32

MscVrIpxSapSFltrRowStatusEntry  
SEQUENCE    
  mscVrIpxSapSFltrRowStatus RowStatus
  mscVrIpxSapSFltrComponentName DisplayString
  mscVrIpxSapSFltrStorageType StorageType
  mscVrIpxSapSFltrIdentifierIndex Integer32

MscVrIpxSapSFltrProvEntry  
SEQUENCE    
  mscVrIpxSapSFltrType AsciiString
  mscVrIpxSapSFltrName AsciiString
  mscVrIpxSapSFltrNetworkNumber AsciiString
  mscVrIpxSapSFltrNode AsciiString
  mscVrIpxSapSFltrDisposition INTEGER

MscVrIpxSapSFltrOperEntry  
SEQUENCE    
  mscVrIpxSapSFltrNumberOfApplyEntries Gauge32

MscVrIpxSapSapAppRowStatusEntry  
SEQUENCE    
  mscVrIpxSapSapAppRowStatus RowStatus
  mscVrIpxSapSapAppComponentName DisplayString
  mscVrIpxSapSapAppStorageType StorageType
  mscVrIpxSapSapAppProtocolPortNameIndex AsciiStringIndex
  mscVrIpxSapSapAppFilterIdentifierIndex Integer32

MscVrIpxSapSapAppProvEntry  
SEQUENCE    
  mscVrIpxSapSapAppDirection INTEGER

MscVrIpxFwdRowStatusEntry  
SEQUENCE    
  mscVrIpxFwdRowStatus RowStatus
  mscVrIpxFwdComponentName DisplayString
  mscVrIpxFwdStorageType StorageType
  mscVrIpxFwdNetworkNumberIndex DashedHexString

MscVrIpxFwdOperEntry  
SEQUENCE    
  mscVrIpxFwdProtocol INTEGER
  mscVrIpxFwdTicks Unsigned32
  mscVrIpxFwdHopCount Gauge32
  mscVrIpxFwdProtocolPortId AsciiString
  mscVrIpxFwdNextHopPhysAddress PhysAddress
  mscVrIpxFwdNextHopNetworkNumber DashedHexString

MscVrIpxSrvcRowStatusEntry  
SEQUENCE    
  mscVrIpxSrvcRowStatus RowStatus
  mscVrIpxSrvcComponentName DisplayString
  mscVrIpxSrvcStorageType StorageType
  mscVrIpxSrvcNetworkNumberIndex DashedHexString
  mscVrIpxSrvcNodeIndex DashedHexString
  mscVrIpxSrvcTypeIndex Integer32
  mscVrIpxSrvcNameIndex AsciiStringIndex

MscVrIpxSrvcOperEntry  
SEQUENCE    
  mscVrIpxSrvcSocket Hex
  mscVrIpxSrvcProtocol INTEGER
  mscVrIpxSrvcHopCount Gauge32

MscVrIpxAdjRowStatusEntry  
SEQUENCE    
  mscVrIpxAdjRowStatus RowStatus
  mscVrIpxAdjComponentName DisplayString
  mscVrIpxAdjStorageType StorageType
  mscVrIpxAdjProtocolPortIdentifierIndex AsciiStringIndex
  mscVrIpxAdjNetworkNumberIndex DashedHexString

MscVrIpxAdjOperEntry  
SEQUENCE    
  mscVrIpxAdjPhysAddress PhysAddress
  mscVrIpxAdjAdjacencyState INTEGER

MscVrIpxNsRowStatusEntry  
SEQUENCE    
  mscVrIpxNsRowStatus RowStatus
  mscVrIpxNsComponentName DisplayString
  mscVrIpxNsStorageType StorageType
  mscVrIpxNsIndex NonReplicated

MscVrIpxNsProvEntry  
SEQUENCE    
  mscVrIpxNsFirstFilter AsciiString
  mscVrIpxNsLastFilter AsciiString
  mscVrIpxNsLocalInFilter AsciiString
  mscVrIpxNsLocalOutFilter AsciiString

MscVrIpxNsNetSentryAppRowStatusEntry  
SEQUENCE    
  mscVrIpxNsNetSentryAppRowStatus RowStatus
  mscVrIpxNsNetSentryAppComponentName DisplayString
  mscVrIpxNsNetSentryAppStorageType StorageType
  mscVrIpxNsNetSentryAppEntryIndex Integer32

MscVrIpxNsNetSentryAppProvEntry  
SEQUENCE    
  mscVrIpxNsNetSentryAppFilter AsciiString
  mscVrIpxNsNetSentryAppNetworkNumber1 AsciiString
  mscVrIpxNsNetSentryAppNode1 AsciiString
  mscVrIpxNsNetSentryAppDirection INTEGER
  mscVrIpxNsNetSentryAppNetworkNumber2 AsciiString
  mscVrIpxNsNetSentryAppNode2 AsciiString

Defined Values

ipxMIB 1.3.6.1.4.1.562.36.2.2.28
OBJECT IDENTIFIER    

mscVrPpIpxP 1.3.6.1.4.1.562.36.2.1.100.3.6
OBJECT IDENTIFIER    

mscVrPpIpxPRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.6.1
This entry controls the addition and deletion of mscVrPpIpxP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPRowStatusEntry

mscVrPpIpxPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.1.1
A single entry in the table represents a single mscVrPpIpxP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPRowStatusEntry  

mscVrPpIpxPRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.6.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpIpxP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscVrPpIpxPComponentName 1.3.6.1.4.1.562.36.2.1.100.3.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrPpIpxPStorageType 1.3.6.1.4.1.562.36.2.1.100.3.6.1.1.4
This variable represents the storage type value for the mscVrPpIpxP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrPpIpxPIndex 1.3.6.1.4.1.562.36.2.1.100.3.6.1.1.10
This variable represents the index for the mscVrPpIpxP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER link(1), ethernet(2), novell(3), sap(4), snap(5), vns(6), tunnel(7)  

mscVrPpIpxPAdminControlTable 1.3.6.1.4.1.562.36.2.1.100.3.6.100
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPAdminControlEntry

mscVrPpIpxPAdminControlEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.100.1
An entry in the mscVrPpIpxPAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPAdminControlEntry  

mscVrPpIpxPSnmpAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.6.100.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpIpxPProvTable 1.3.6.1.4.1.562.36.2.1.100.3.6.101
The Provisionable group for the IpxPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPProvEntry

mscVrPpIpxPProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.101.1
An entry in the mscVrPpIpxPProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPProvEntry  

mscVrPpIpxPNetworkNumberProv 1.3.6.1.4.1.562.36.2.1.100.3.6.101.1.1
The Ipx network number of the network directly connected to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DashedHexString Size(0..4)  

mscVrPpIpxPDefaultType 1.3.6.1.4.1.562.36.2.1.100.3.6.101.1.2
This attribute indicates which protocol is to run on a protocol port. In the case of a lan media it is to be set to broadcast. In the case of WAN media the following choices are to be exercised: For running Pre-IPXWAN RIP set value to other. For running numbered RIP set value to wanRip. For running un-numbered RIP set value to unnumberedRip. Setting this value to ppp will signify unnumbered Rip running on a ppp port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), broadcast(2), ppp(3), wanRip(4), unnumberedRip(5)  

mscVrPpIpxPBroadcastInhibit 1.3.6.1.4.1.562.36.2.1.100.3.6.101.1.3
If this attribute is set, all outgoing periodic and triggered updates for RIP and SAP will be inhibited for the port. However the port will still accept incoming RIP and SAP packets on the port. This may be useful for ports with only a bank of servers on its network in order to limit the routing traffic, assuming that servers don't require routing information or other server information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpIpxPSresProvTable 1.3.6.1.4.1.562.36.2.1.100.3.6.102
This group contains the provisioned attributes for SourceRouteEndStation support.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPSresProvEntry

mscVrPpIpxPSresProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.102.1
An entry in the mscVrPpIpxPSresProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPSresProvEntry  

mscVrPpIpxPSourceRouteEndStationSupport 1.3.6.1.4.1.562.36.2.1.100.3.6.102.1.1
This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned under the VirtualRouter if this attribute is set to enable. If this attribute is set to enable and this Pp has its linkToMedia attribute set, it must be linked to a LanApplication (La) that has its Framer interfaceName linked to a Fddi or TokenRing component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mscVrPpIpxPStateTable 1.3.6.1.4.1.562.36.2.1.100.3.6.103
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPStateEntry

mscVrPpIpxPStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.103.1
An entry in the mscVrPpIpxPStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPStateEntry  

mscVrPpIpxPAdminState 1.3.6.1.4.1.562.36.2.1.100.3.6.103.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpIpxPOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.6.103.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpIpxPUsageState 1.3.6.1.4.1.562.36.2.1.100.3.6.103.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpIpxPOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.6.104
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPOperStatusEntry

mscVrPpIpxPOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.104.1
An entry in the mscVrPpIpxPOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPOperStatusEntry  

mscVrPpIpxPSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.6.104.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpIpxPOperTable 1.3.6.1.4.1.562.36.2.1.100.3.6.105
The IpxPort Operational Attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPOperEntry

mscVrPpIpxPOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.105.1
An entry in the mscVrPpIpxPOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPOperEntry  

mscVrPpIpxPType 1.3.6.1.4.1.562.36.2.1.100.3.6.105.1.1
The type of the circuit. This would differ from the provisioned type when a different routing protocol is negotiated with the peer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), broadcast(2), ppp(3), wanRip(4), unnumberedRip(5)  

mscVrPpIpxPEncapsulation 1.3.6.1.4.1.562.36.2.1.100.3.6.105.1.2
Packet encapsulation type that the router has determined to use on the port. There are seven encapsulation types used to identify IPX datagram as listed below. 1. link: IPX encapsulation type for PPP, ATM MPE, and X25DTE media types. 2. ethernet: IPX encapsulation type for Ethernet and FrDte media types. 3. novell: IPX encapsulation type for Ethernet and FrDte media types. 4. sap: IPX encapsulation type for FDDI, Token Ring, Ethernet and FrDte media types. 5. snap: IPX encapsulation type for FDDI, Token Ring, Ethernet, and FrDte media types. 6. vns: IPX encapsulation type for VNS media type. 7. tunnel: IPX encapsulation type for Tunnel media type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER link(1), ethernet(2), novell(3), sap(4), snap(5), vns(6), tunnel(7)  

mscVrPpIpxPNetworkNumber 1.3.6.1.4.1.562.36.2.1.100.3.6.105.1.3
The Ipx network number from the provisioned networkNumberProv value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(0..4)  

mscVrPpIpxPNode 1.3.6.1.4.1.562.36.2.1.100.3.6.105.1.4
The Ipx node address of this IpxPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(1..6)  

mscVrPpIpxPStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.6.106
The IpxPort Statistics group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPStatsEntry

mscVrPpIpxPStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.106.1
An entry in the mscVrPpIpxPStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPStatsEntry  

mscVrPpIpxPStateChanges 1.3.6.1.4.1.562.36.2.1.100.3.6.106.1.1
Number of times the port has changed state. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPInReceives 1.3.6.1.4.1.562.36.2.1.100.3.6.106.1.2
Total number of packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPForwarded 1.3.6.1.4.1.562.36.2.1.100.3.6.106.1.3
Number of packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPRipP 1.3.6.1.4.1.562.36.2.1.100.3.6.2
OBJECT IDENTIFIER    

mscVrPpIpxPRipPRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.6.2.1
This entry controls the addition and deletion of mscVrPpIpxPRipP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPRipPRowStatusEntry

mscVrPpIpxPRipPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1
A single entry in the table represents a single mscVrPpIpxPRipP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPRipPRowStatusEntry  

mscVrPpIpxPRipPRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpIpxPRipP components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscVrPpIpxPRipPComponentName 1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrPpIpxPRipPStorageType 1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1.4
This variable represents the storage type value for the mscVrPpIpxPRipP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrPpIpxPRipPIndex 1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1.10
This variable represents the index for the mscVrPpIpxPRipP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscVrPpIpxPRipPStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.6.2.10
RIP specific statistics for this IpxPort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPRipPStatsEntry

mscVrPpIpxPRipPStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1
An entry in the mscVrPpIpxPRipPStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPRipPStatsEntry  

mscVrPpIpxPRipPInPackets 1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.1
The number of RIP packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPRipPInRequests 1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.2
The number of RIP request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPRipPInResponses 1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.3
The number of RIP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPRipPOutPackets 1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.4
The number of RIP packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPRipPOutRequests 1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.5
The number of RIP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPRipPOutResponses 1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.6
The number of RIP response packets sent out on this IpxPort. This includes RIP periodic update packets. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPRipPIncorrectPackets 1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.7
Number of times that an incorrectly formatted RIP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPSapP 1.3.6.1.4.1.562.36.2.1.100.3.6.3
OBJECT IDENTIFIER    

mscVrPpIpxPSapPRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.6.3.1
This entry controls the addition and deletion of mscVrPpIpxPSapP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPSapPRowStatusEntry

mscVrPpIpxPSapPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1
A single entry in the table represents a single mscVrPpIpxPSapP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPSapPRowStatusEntry  

mscVrPpIpxPSapPRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpIpxPSapP components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscVrPpIpxPSapPComponentName 1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrPpIpxPSapPStorageType 1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1.4
This variable represents the storage type value for the mscVrPpIpxPSapP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrPpIpxPSapPIndex 1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1.10
This variable represents the index for the mscVrPpIpxPSapP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscVrPpIpxPSapPStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.6.3.10
SAP specific statistics for this IpxPort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPSapPStatsEntry

mscVrPpIpxPSapPStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1
An entry in the mscVrPpIpxPSapPStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPSapPStatsEntry  

mscVrPpIpxPSapPInPackets 1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.1
The total number of SAP packets received on this IpxPort. Includes SAP requests and responses. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPSapPInRequests 1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.2
The number of SAP Request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPSapPInResponses 1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.3
The number of SAP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPSapPOutPackets 1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.4
The total number of SAP packets sent out this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPSapPOutRequests 1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.5
The number of SAP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPSapPOutResponses 1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.6
The number of SAP response packets sent out this IpxPort. This includes periodic SAP update packets. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPSapPIncorrectPackets 1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.7
Number of times an incorrectly formatted SAP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPIWP 1.3.6.1.4.1.562.36.2.1.100.3.6.4
OBJECT IDENTIFIER    

mscVrPpIpxPIWPRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.6.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrPpIpxPIWP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPIWPRowStatusEntry

mscVrPpIpxPIWPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1
A single entry in the table represents a single mscVrPpIpxPIWP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPIWPRowStatusEntry  

mscVrPpIpxPIWPRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpIpxPIWP components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscVrPpIpxPIWPComponentName 1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrPpIpxPIWPStorageType 1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1.4
This variable represents the storage type value for the mscVrPpIpxPIWP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrPpIpxPIWPRemoteStationIdentifierIndex 1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1.10
This variable represents the index for the mscVrPpIpxPIWP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..8)  

mscVrPpIpxPIWPOperTable 1.3.6.1.4.1.562.36.2.1.100.3.6.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains operational attributes that are specific for the IPXWAN protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPIWPOperEntry

mscVrPpIpxPIWPOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.4.10.1
An entry in the mscVrPpIpxPIWPOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPIWPOperEntry  

mscVrPpIpxPIWPNeighbourRouterName 1.3.6.1.4.1.562.36.2.1.100.3.6.4.10.1.1
The name of the neighboring router on a WAN circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..48)  

mscVrPpIpxPIWPNeighbourInternalNetworkNumber 1.3.6.1.4.1.562.36.2.1.100.3.6.4.10.1.2
The internal network number of the neighboring router on a WAN circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(1..4)  

mscVrPpIpxPIWPInitFails 1.3.6.1.4.1.562.36.2.1.100.3.6.4.10.1.3
The number of times initialization has failed on this circuit. This counter wraps around to zero after reaching the maximum value of 4294967295
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrPpIpxPNetSentryP 1.3.6.1.4.1.562.36.2.1.100.3.6.5
OBJECT IDENTIFIER    

mscVrPpIpxPNetSentryPRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.6.5.1
This entry controls the addition and deletion of mscVrPpIpxPNetSentryP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPNetSentryPRowStatusEntry

mscVrPpIpxPNetSentryPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1
A single entry in the table represents a single mscVrPpIpxPNetSentryP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPNetSentryPRowStatusEntry  

mscVrPpIpxPNetSentryPRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpIpxPNetSentryP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscVrPpIpxPNetSentryPComponentName 1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrPpIpxPNetSentryPStorageType 1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1.4
This variable represents the storage type value for the mscVrPpIpxPNetSentryP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrPpIpxPNetSentryPIndex 1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1.10
This variable represents the index for the mscVrPpIpxPNetSentryP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscVrPpIpxPNetSentryPProvTable 1.3.6.1.4.1.562.36.2.1.100.3.6.5.10
This group contains the NetSentry attributes that specify the names of the NetSentry filters which will be applied to IPX packets as incoming and outgoing filters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpIpxPNetSentryPProvEntry

mscVrPpIpxPNetSentryPProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.6.5.10.1
An entry in the mscVrPpIpxPNetSentryPProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrPpIpxPNetSentryPProvEntry  

mscVrPpIpxPNetSentryPInComingFilter 1.3.6.1.4.1.562.36.2.1.100.3.6.5.10.1.1
This attribute specifies the name of the NetSentry filter applied to incoming IPX packets on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscVrPpIpxPNetSentryPOutGoingFilter 1.3.6.1.4.1.562.36.2.1.100.3.6.5.10.1.2
The name of the filter applied to outgoing IPX packets on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscVrIpx 1.3.6.1.4.1.562.36.2.1.100.7
OBJECT IDENTIFIER    

mscVrIpxRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.1
This entry controls the addition and deletion of mscVrIpx components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxRowStatusEntry

mscVrIpxRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.1.1
A single entry in the table represents a single mscVrIpx component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxRowStatusEntry  

mscVrIpxRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpx components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscVrIpxComponentName 1.3.6.1.4.1.562.36.2.1.100.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxStorageType 1.3.6.1.4.1.562.36.2.1.100.7.1.1.4
This variable represents the storage type value for the mscVrIpx tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxIndex 1.3.6.1.4.1.562.36.2.1.100.7.1.1.10
This variable represents the index for the mscVrIpx tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscVrIpxAdminControlTable 1.3.6.1.4.1.562.36.2.1.100.7.100
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxAdminControlEntry

mscVrIpxAdminControlEntry 1.3.6.1.4.1.562.36.2.1.100.7.100.1
An entry in the mscVrIpxAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxAdminControlEntry  

mscVrIpxSnmpAdminStatus 1.3.6.1.4.1.562.36.2.1.100.7.100.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrIpxProvTable 1.3.6.1.4.1.562.36.2.1.100.7.101
IPX system provisionable attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxProvEntry

mscVrIpxProvEntry 1.3.6.1.4.1.562.36.2.1.100.7.101.1
An entry in the mscVrIpxProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxProvEntry  

mscVrIpxNetworkNumber 1.3.6.1.4.1.562.36.2.1.100.7.101.1.1
This attribute indicates the internal network number portion of the IPX address. This network number must be unique within the internetwork and is necessary to determine master/slave relationships during IPXWAN negotiations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DashedHexString Size(1..4)  

mscVrIpxMaxPathSplits 1.3.6.1.4.1.562.36.2.1.100.7.101.1.2
This attribute indicates the maximum number of paths with equal routing metric value which this instance of IPX may split between when forwarding packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4  

mscVrIpxMaxHops 1.3.6.1.4.1.562.36.2.1.100.7.101.1.3
This attribute indicates the maximum number of hops a packet may take.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..64  

mscVrIpxRipUpdateInterval 1.3.6.1.4.1.562.36.2.1.100.7.101.1.4
The RIP periodic update interval, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

mscVrIpxSapUpdateInterval 1.3.6.1.4.1.562.36.2.1.100.7.101.1.5
The SAP periodic update interval, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

mscVrIpxControlDelay 1.3.6.1.4.1.562.36.2.1.100.7.101.1.6
The delay, in microsecs, between receiving a request from a client and sending a response. This router is significantly faster than some Ipx clients. If a problem is being experienced between a router and an Ipx client, it might be resolved by changing the controlDelay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

mscVrIpxUpdateDelay 1.3.6.1.4.1.562.36.2.1.100.7.101.1.7
The delay, in milliseconds, between sending consecutive (RIP and/or SAP) packets. 55 milliseconds is the minimum specified in the Ipx Router Specification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 55..500  

mscVrIpxRipAgeMultiplier 1.3.6.1.4.1.562.36.2.1.100.7.101.1.8
After this many Rip Update intervals unrefreshed Rip information is considered expired.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

mscVrIpxSapAgeMultiplier 1.3.6.1.4.1.562.36.2.1.100.7.101.1.9
After this many SAP Update intervals unrefreshed SAP information is considered expired.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

mscVrIpxDamping 1.3.6.1.4.1.562.36.2.1.100.7.101.1.10
This attribute specifies whether damping is applied. Damping refers to the damping of incoming RIP and SAP requests. It handles cases where a rogue client or server is making an extraodinary number of requests. With damping set to disabled, the switch will reply to all requests with no check for rogue nodes.With damping set to enabled, the switch will not reply to a request if the same node made more than the allowable number of requests within 10 seconds. The maximum number of requests to damp at is specified by the following provisionable attributes: ripMaxDampedGeneralRequest, ripMaxDampedSpecificRequests, sapMaxDampedGeneralRequests, sapMaxDampedSpecificRequests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrIpxRipMaxDampedGeneralRequests 1.3.6.1.4.1.562.36.2.1.100.7.101.1.11
This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedGeneralRequests are responded to and the remainder are ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

mscVrIpxRipMaxDampedSpecificRequests 1.3.6.1.4.1.562.36.2.1.100.7.101.1.12
This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedSpecificRequests are responded to and the remainder are ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

mscVrIpxSapMaxDampedGeneralRequests 1.3.6.1.4.1.562.36.2.1.100.7.101.1.13
This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedGeneralRequests are responded to and the remainder are ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

mscVrIpxSapMaxDampedSpecificRequests 1.3.6.1.4.1.562.36.2.1.100.7.101.1.14
This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedSpecificRequests are responded to and the remainder are ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

mscVrIpxInitialGeneralRequests 1.3.6.1.4.1.562.36.2.1.100.7.101.1.15
This attribute specifies whether the RIP and SAP general requests are sent out a port when the port first comes up. If this attribute is enabled the initial requests will be made; whereas if the attribute is disabled the initial requests will not be made. This attribute may be disabled in order to avoid the traffic resulting within the network from these initial requests and the ensuing responses. With the initial request disabled, the switch will learn about other network segments off of the IPX ports via the periodic broadcasts which are received on those port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrIpxHoldDownInterval 1.3.6.1.4.1.562.36.2.1.100.7.101.1.16
This attribute specifies an interval, after a network is removed from the route table, during which other incoming route updates for the same network will be ignored. The use of this interval prevents the slow convergence which results when switches that receive late network down broadcasts advertise false routes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrIpxStateTable 1.3.6.1.4.1.562.36.2.1.100.7.103
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxStateEntry

mscVrIpxStateEntry 1.3.6.1.4.1.562.36.2.1.100.7.103.1
An entry in the mscVrIpxStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxStateEntry  

mscVrIpxAdminState 1.3.6.1.4.1.562.36.2.1.100.7.103.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrIpxOperationalState 1.3.6.1.4.1.562.36.2.1.100.7.103.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrIpxUsageState 1.3.6.1.4.1.562.36.2.1.100.7.103.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrIpxOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.104
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxOperStatusEntry

mscVrIpxOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.104.1
An entry in the mscVrIpxOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxOperStatusEntry  

mscVrIpxSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.7.104.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrIpxOperTable 1.3.6.1.4.1.562.36.2.1.100.7.105
This group contains IPX related operational attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxOperEntry

mscVrIpxOperEntry 1.3.6.1.4.1.562.36.2.1.100.7.105.1
An entry in the mscVrIpxOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxOperEntry  

mscVrIpxProtocolPortCount 1.3.6.1.4.1.562.36.2.1.100.7.105.1.1
The number of portsknown to this instance of Ipx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrIpxDestinationCount 1.3.6.1.4.1.562.36.2.1.100.7.105.1.2
The number of currently reachable destinations known to Ipx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrIpxServicesCount 1.3.6.1.4.1.562.36.2.1.100.7.105.1.3
The number of Services known to Ipx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrIpxStatsTable 1.3.6.1.4.1.562.36.2.1.100.7.107
This group contains IPX related statistics on the CP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxStatsEntry

mscVrIpxStatsEntry 1.3.6.1.4.1.562.36.2.1.100.7.107.1
An entry in the mscVrIpxStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxStatsEntry  

mscVrIpxInReceives 1.3.6.1.4.1.562.36.2.1.100.7.107.1.1
This attribute counts the total number of IPX packets received, including those received in error. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxInHeaderErrors 1.3.6.1.4.1.562.36.2.1.100.7.107.1.2
The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxInUnknownSocket 1.3.6.1.4.1.562.36.2.1.100.7.107.1.3
The number of IPX packets discarded because the destination socket was not open. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxInDiscards 1.3.6.1.4.1.562.36.2.1.100.7.107.1.4
Number of packets received but discarded due to reasons other than those accounted for by inHeaderErrors and inUnknownSocket. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxInBadChecksums 1.3.6.1.4.1.562.36.2.1.100.7.107.1.5
Number of packets received with incorrect checksums. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxInDelivers 1.3.6.1.4.1.562.36.2.1.100.7.107.1.6
Number of IPX packets delivered locally, including packets from local applications. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxNoRoutes 1.3.6.1.4.1.562.36.2.1.100.7.107.1.7
Number of times no route to a destination was found. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxOutRequests 1.3.6.1.4.1.562.36.2.1.100.7.107.1.8
The number of IPX packets supplied locally for transmission, not including any packets counted in the forwarded attribute. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxOutMalformedRequests 1.3.6.1.4.1.562.36.2.1.100.7.107.1.9
Number of outgoing packets supplied locally that contained errors in their structure. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxOutDiscards 1.3.6.1.4.1.562.36.2.1.100.7.107.1.10
The number of outgoing IPX packets discarded due to reasons other than those accounted for in outMalformedRequests or outFiltered. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxOutPackets 1.3.6.1.4.1.562.36.2.1.100.7.107.1.11
The total number of IPX packets transmitted. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxInTooManyHops 1.3.6.1.4.1.562.36.2.1.100.7.107.1.12
Number of packets discarded due to exceeding the maxHops value. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxInFiltered 1.3.6.1.4.1.562.36.2.1.100.7.107.1.13
The number of incoming IPX packets discarded due to filtering. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxInNetBIOS 1.3.6.1.4.1.562.36.2.1.100.7.107.1.14
The number of NetBIOS packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxForwarded 1.3.6.1.4.1.562.36.2.1.100.7.107.1.15
The number of IPX packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxOutFiltered 1.3.6.1.4.1.562.36.2.1.100.7.107.1.16
The number of outgoing packets discarded due to filtering. This also includes the number of forwarded packets filtered. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxRip 1.3.6.1.4.1.562.36.2.1.100.7.2
OBJECT IDENTIFIER    

mscVrIpxRipRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.2.1
This entry controls the addition and deletion of mscVrIpxRip components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxRipRowStatusEntry

mscVrIpxRipRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.2.1.1
A single entry in the table represents a single mscVrIpxRip component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxRipRowStatusEntry  

mscVrIpxRipRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxRip components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscVrIpxRipComponentName 1.3.6.1.4.1.562.36.2.1.100.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxRipStorageType 1.3.6.1.4.1.562.36.2.1.100.7.2.1.1.4
This variable represents the storage type value for the mscVrIpxRip tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxRipIndex 1.3.6.1.4.1.562.36.2.1.100.7.2.1.1.10
This variable represents the index for the mscVrIpxRip tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscVrIpxRipStatsTable 1.3.6.1.4.1.562.36.2.1.100.7.2.10
IPX statistics related to the RIP protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxRipStatsEntry

mscVrIpxRipStatsEntry 1.3.6.1.4.1.562.36.2.1.100.7.2.10.1
An entry in the mscVrIpxRipStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxRipStatsEntry  

mscVrIpxRipRipIn 1.3.6.1.4.1.562.36.2.1.100.7.2.10.1.1
This attribute counts the total number of IPX RIP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxRipRipOut 1.3.6.1.4.1.562.36.2.1.100.7.2.10.1.2
This attribute counts the total number of RIP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxRipRipIncorrectPackets 1.3.6.1.4.1.562.36.2.1.100.7.2.10.1.3
This attribute counts the number of times an incorrectly formatted RIP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxRipRFltr 1.3.6.1.4.1.562.36.2.1.100.7.2.2
OBJECT IDENTIFIER    

mscVrIpxRipRFltrRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.2.2.1
This entry controls the addition and deletion of mscVrIpxRipRFltr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxRipRFltrRowStatusEntry

mscVrIpxRipRFltrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1
A single entry in the table represents a single mscVrIpxRipRFltr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxRipRFltrRowStatusEntry  

mscVrIpxRipRFltrRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxRipRFltr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscVrIpxRipRFltrComponentName 1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxRipRFltrStorageType 1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1.4
This variable represents the storage type value for the mscVrIpxRipRFltr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxRipRFltrIdentifierIndex 1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1.10
This variable represents the index for the mscVrIpxRipRFltr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrIpxRipRFltrProvTable 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10
This is the provisionable attribute group for RipFilter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxRipRFltrProvEntry

mscVrIpxRipRFltrProvEntry 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1
An entry in the mscVrIpxRipRFltrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxRipRFltrProvEntry  

mscVrIpxRipRFltrHops 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.1
This attribute specifies the distance in terms of number of hops. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A hops value preceded by an equality operator(=), less than operator(<) or greater than operator(>) should be interpreted as matching all RIP packet tuples which are an equal, smaller or greater distance, respectively, away from the switch than the hops value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The number of hops is specified as a decimal number between 0 and 999.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..4)  

mscVrIpxRipRFltrTicks 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.2
This attribute specifies the distance in terms of delay in ticks. A tick is 1/ 18 of a second. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A ticks value preceded by a equality operator(=), less than operator(<) or greater than operator(>) should be interpreted as matching all RIP packet tuples which are an equal, greater or lower delay, respectively, away from the switch than the ticks value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The ticks value is specified as a decimal number between 0 and 999.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..4)  

mscVrIpxRipRFltrNetworkNumber 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.3
This attribute specifies the network number of matching networks in RIP packets to be filtered or passed depending on the disposition of the filter. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid network number would be ff-ff-ff-?? or ffffff??). Wildcard characters may be used only in pairs to replace a pair of hex digits. Filters with a network number preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for the tuples with this network number. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..12)  

mscVrIpxRipRFltrNode 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.4
This attribute specifies the node portion in the source IPX address (that is, the MAC address or circuit ID) of received RIP packets for which the contained network tuples should be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the input direction and will be ignored if the filter is applied in the output direction.The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid node number would be 00-20-??-??-??-?? or 0020???????? ). Wildcard characters may be used only in pairs to replace a pair of hex digits. A node number preceded by a caret (^) should be interpreted as matching all RIP packets' network tuples except for the RIP packets with this source node address. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..18)  

mscVrIpxRipRFltrPort 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.5
This attribute specifies the name of a protocol port whereby networks learned over this port are to be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the output direction and will be ignored if the filter is applied in the input direction. This attribute is entered as an ascii string and must correspond to a name of a provisioned protocol port. A port name preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for those learned on this port. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..18)  

mscVrIpxRipRFltrDisposition 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.6
This attribute indicates a reversal of the filter pattern match. If the value is pass, then matching filters will cause the RIP packet tuple to be passed. If the value is filter, then matching filters will cause the RIP packet tuple to be filtered.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pass(1), filter(2)  

mscVrIpxRipRFltrOperTable 1.3.6.1.4.1.562.36.2.1.100.7.2.2.11
This is the operational attribute group for IpxRipFilter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxRipRFltrOperEntry

mscVrIpxRipRFltrOperEntry 1.3.6.1.4.1.562.36.2.1.100.7.2.2.11.1
An entry in the mscVrIpxRipRFltrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxRipRFltrOperEntry  

mscVrIpxRipRFltrNumberOfApplyEntries 1.3.6.1.4.1.562.36.2.1.100.7.2.2.11.1.1
This attribute indicates the number of times this filter is referenced by a RipApplyEntry. If zero, this filter is not applied on any ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscVrIpxRipRipApp 1.3.6.1.4.1.562.36.2.1.100.7.2.3
OBJECT IDENTIFIER    

mscVrIpxRipRipAppRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.2.3.1
This entry controls the addition and deletion of mscVrIpxRipRipApp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxRipRipAppRowStatusEntry

mscVrIpxRipRipAppRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1
A single entry in the table represents a single mscVrIpxRipRipApp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxRipRipAppRowStatusEntry  

mscVrIpxRipRipAppRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxRipRipApp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscVrIpxRipRipAppComponentName 1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxRipRipAppStorageType 1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.4
This variable represents the storage type value for the mscVrIpxRipRipApp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxRipRipAppProtocolPortNameIndex 1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.10
This variable represents an index for the mscVrIpxRipRipApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

mscVrIpxRipRipAppFilterIdentifierIndex 1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.11
This variable represents an index for the mscVrIpxRipRipApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrIpxRipRipAppProvTable 1.3.6.1.4.1.562.36.2.1.100.7.2.3.10
This is the RipApplyEntry provisionable group of attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxRipRipAppProvEntry

mscVrIpxRipRipAppProvEntry 1.3.6.1.4.1.562.36.2.1.100.7.2.3.10.1
An entry in the mscVrIpxRipRipAppProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxRipRipAppProvEntry  

mscVrIpxRipRipAppDirection 1.3.6.1.4.1.562.36.2.1.100.7.2.3.10.1.1
This attribute specifies whether this RIP filter is applied as an input filter or an output filter. If set to none, this indicates that the filter, though applied to the port, is not currently active in either direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), output(1), input(2)  

mscVrIpxSap 1.3.6.1.4.1.562.36.2.1.100.7.3
OBJECT IDENTIFIER    

mscVrIpxSapRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.3.1
This entry controls the addition and deletion of mscVrIpxSap components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxSapRowStatusEntry

mscVrIpxSapRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.3.1.1
A single entry in the table represents a single mscVrIpxSap component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxSapRowStatusEntry  

mscVrIpxSapRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.3.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxSap components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscVrIpxSapComponentName 1.3.6.1.4.1.562.36.2.1.100.7.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxSapStorageType 1.3.6.1.4.1.562.36.2.1.100.7.3.1.1.4
This variable represents the storage type value for the mscVrIpxSap tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxSapIndex 1.3.6.1.4.1.562.36.2.1.100.7.3.1.1.10
This variable represents the index for the mscVrIpxSap tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscVrIpxSapStatsTable 1.3.6.1.4.1.562.36.2.1.100.7.3.10
IPX statistics specific to the SAP protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxSapStatsEntry

mscVrIpxSapStatsEntry 1.3.6.1.4.1.562.36.2.1.100.7.3.10.1
An entry in the mscVrIpxSapStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxSapStatsEntry  

mscVrIpxSapSapIn 1.3.6.1.4.1.562.36.2.1.100.7.3.10.1.1
The total number of SAP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxSapSapOut 1.3.6.1.4.1.562.36.2.1.100.7.3.10.1.2
The total number of SAP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxSapSapIncorrectPackets 1.3.6.1.4.1.562.36.2.1.100.7.3.10.1.3
The number of times an incorrectly formatted SAP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscVrIpxSapSFltr 1.3.6.1.4.1.562.36.2.1.100.7.3.2
OBJECT IDENTIFIER    

mscVrIpxSapSFltrRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.3.2.1
This entry controls the addition and deletion of mscVrIpxSapSFltr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxSapSFltrRowStatusEntry

mscVrIpxSapSFltrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1
A single entry in the table represents a single mscVrIpxSapSFltr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxSapSFltrRowStatusEntry  

mscVrIpxSapSFltrRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxSapSFltr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscVrIpxSapSFltrComponentName 1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxSapSFltrStorageType 1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1.4
This variable represents the storage type value for the mscVrIpxSapSFltr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxSapSFltrIdentifierIndex 1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1.10
This variable represents the index for the mscVrIpxSapSFltr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrIpxSapSFltrProvTable 1.3.6.1.4.1.562.36.2.1.100.7.3.2.10
The provisionable attribute group for SapFilter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxSapSFltrProvEntry

mscVrIpxSapSFltrProvEntry 1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1
An entry in the mscVrIpxSapSFltrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxSapSFltrProvEntry  

mscVrIpxSapSFltrType 1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.1
This attribute specifies the Novell Service type of the services to be filtered from the SAP packets. The type can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 4 digits. (For example a valid type would be ff-ff or ffff). A type preceded by a caret(^) should be interpreted as filtering all SAP packets except for those with this type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..6)  

mscVrIpxSapSFltrName 1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.2
This attribute specifies the readable name of the service to be filtered from SAP packets. The name can be 47 characters or less. This does not include the caret (^) character which precedes the name. A name preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..48)  

mscVrIpxSapSFltrNetworkNumber 1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.3
This attribute specifies the network number of the service to be filtered from SAP packets. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). A network number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this network number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..12)  

mscVrIpxSapSFltrNode 1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.4
This attribute specifies the node portion of the IPX address of the service to be filtered from SAP packets. The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits.. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). A node number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this node number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..18)  

mscVrIpxSapSFltrDisposition 1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.5
Indicates a reversal of the filter pattern match.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pass(1), filter(2)  

mscVrIpxSapSFltrOperTable 1.3.6.1.4.1.562.36.2.1.100.7.3.2.11
The operational attribute group for IpxSapFilter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxSapSFltrOperEntry

mscVrIpxSapSFltrOperEntry 1.3.6.1.4.1.562.36.2.1.100.7.3.2.11.1
An entry in the mscVrIpxSapSFltrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxSapSFltrOperEntry  

mscVrIpxSapSFltrNumberOfApplyEntries 1.3.6.1.4.1.562.36.2.1.100.7.3.2.11.1.1
The number of times this filter appears in IpxSapApplyEntry. If zero, this filter is not applied on any ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscVrIpxSapSapApp 1.3.6.1.4.1.562.36.2.1.100.7.3.3
OBJECT IDENTIFIER    

mscVrIpxSapSapAppRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.3.3.1
This entry controls the addition and deletion of mscVrIpxSapSapApp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxSapSapAppRowStatusEntry

mscVrIpxSapSapAppRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1
A single entry in the table represents a single mscVrIpxSapSapApp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxSapSapAppRowStatusEntry  

mscVrIpxSapSapAppRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxSapSapApp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscVrIpxSapSapAppComponentName 1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxSapSapAppStorageType 1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.4
This variable represents the storage type value for the mscVrIpxSapSapApp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxSapSapAppProtocolPortNameIndex 1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.10
This variable represents an index for the mscVrIpxSapSapApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

mscVrIpxSapSapAppFilterIdentifierIndex 1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.11
This variable represents an index for the mscVrIpxSapSapApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrIpxSapSapAppProvTable 1.3.6.1.4.1.562.36.2.1.100.7.3.3.10
The IpxSapApplyEntry provisionable group of attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxSapSapAppProvEntry

mscVrIpxSapSapAppProvEntry 1.3.6.1.4.1.562.36.2.1.100.7.3.3.10.1
An entry in the mscVrIpxSapSapAppProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxSapSapAppProvEntry  

mscVrIpxSapSapAppDirection 1.3.6.1.4.1.562.36.2.1.100.7.3.3.10.1.1
Indicates whether this SAP filter is applied as an input filter or an output filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), output(1), input(2)  

mscVrIpxFwd 1.3.6.1.4.1.562.36.2.1.100.7.4
OBJECT IDENTIFIER    

mscVrIpxFwdRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpxFwd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxFwdRowStatusEntry

mscVrIpxFwdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.4.1.1
A single entry in the table represents a single mscVrIpxFwd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxFwdRowStatusEntry  

mscVrIpxFwdRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.4.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxFwd components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscVrIpxFwdComponentName 1.3.6.1.4.1.562.36.2.1.100.7.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxFwdStorageType 1.3.6.1.4.1.562.36.2.1.100.7.4.1.1.4
This variable represents the storage type value for the mscVrIpxFwd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxFwdNetworkNumberIndex 1.3.6.1.4.1.562.36.2.1.100.7.4.1.1.10
This variable represents the index for the mscVrIpxFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..4)  

mscVrIpxFwdOperTable 1.3.6.1.4.1.562.36.2.1.100.7.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** IpxForwarding operational attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxFwdOperEntry

mscVrIpxFwdOperEntry 1.3.6.1.4.1.562.36.2.1.100.7.4.10.1
An entry in the mscVrIpxFwdOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxFwdOperEntry  

mscVrIpxFwdProtocol 1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.1
The routing protocol from which knowledge of this destination was obtained.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), rip(3), nlsp(4), static(5)  

mscVrIpxFwdTicks 1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.2
The delay, in ticks, to reach this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrIpxFwdHopCount 1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.3
The number of hops required to reach this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 1..64  

mscVrIpxFwdProtocolPortId 1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.4
The unique identifier of the ProtocolPort used to reach the next hop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..20)  

mscVrIpxFwdNextHopPhysAddress 1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.5
The physical address of the next hop
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress Size(1..6)  

mscVrIpxFwdNextHopNetworkNumber 1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.6
The IPX network number of the next hop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(1..4)  

mscVrIpxSrvc 1.3.6.1.4.1.562.36.2.1.100.7.5
OBJECT IDENTIFIER    

mscVrIpxSrvcRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpxSrvc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxSrvcRowStatusEntry

mscVrIpxSrvcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.5.1.1
A single entry in the table represents a single mscVrIpxSrvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxSrvcRowStatusEntry  

mscVrIpxSrvcRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxSrvc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscVrIpxSrvcComponentName 1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxSrvcStorageType 1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.4
This variable represents the storage type value for the mscVrIpxSrvc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxSrvcNetworkNumberIndex 1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.10
This variable represents an index for the mscVrIpxSrvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..4)  

mscVrIpxSrvcNodeIndex 1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.11
This variable represents an index for the mscVrIpxSrvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..6)  

mscVrIpxSrvcTypeIndex 1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.12
This variable represents an index for the mscVrIpxSrvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

mscVrIpxSrvcNameIndex 1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.13
This variable represents an index for the mscVrIpxSrvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..48)  

mscVrIpxSrvcOperTable 1.3.6.1.4.1.562.36.2.1.100.7.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Ipx Services Operational group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxSrvcOperEntry

mscVrIpxSrvcOperEntry 1.3.6.1.4.1.562.36.2.1.100.7.5.10.1
An entry in the mscVrIpxSrvcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxSrvcOperEntry  

mscVrIpxSrvcSocket 1.3.6.1.4.1.562.36.2.1.100.7.5.10.1.1
Socket at which the service is available
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..65535  

mscVrIpxSrvcProtocol 1.3.6.1.4.1.562.36.2.1.100.7.5.10.1.2
The protocol from which knowledge of this service was obtained.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), nlsp(4), static(5), sap(6)  

mscVrIpxSrvcHopCount 1.3.6.1.4.1.562.36.2.1.100.7.5.10.1.3
Number of hops to the service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..64  

mscVrIpxAdj 1.3.6.1.4.1.562.36.2.1.100.7.6
OBJECT IDENTIFIER    

mscVrIpxAdjRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.6.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpxAdj components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxAdjRowStatusEntry

mscVrIpxAdjRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.6.1.1
A single entry in the table represents a single mscVrIpxAdj component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxAdjRowStatusEntry  

mscVrIpxAdjRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxAdj components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscVrIpxAdjComponentName 1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxAdjStorageType 1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.4
This variable represents the storage type value for the mscVrIpxAdj tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxAdjProtocolPortIdentifierIndex 1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.10
This variable represents an index for the mscVrIpxAdj tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

mscVrIpxAdjNetworkNumberIndex 1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.11
This variable represents an index for the mscVrIpxAdj tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..4)  

mscVrIpxAdjOperTable 1.3.6.1.4.1.562.36.2.1.100.7.6.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Adjacencies operational group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxAdjOperEntry

mscVrIpxAdjOperEntry 1.3.6.1.4.1.562.36.2.1.100.7.6.10.1
An entry in the mscVrIpxAdjOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxAdjOperEntry  

mscVrIpxAdjPhysAddress 1.3.6.1.4.1.562.36.2.1.100.7.6.10.1.1
The physical address of the adjacent router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress Size(1..6)  

mscVrIpxAdjAdjacencyState 1.3.6.1.4.1.562.36.2.1.100.7.6.10.1.2
The state of the connection to the adjacent router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initializing(1), up(2), failed(3), down(4)  

mscVrIpxNs 1.3.6.1.4.1.562.36.2.1.100.7.7
OBJECT IDENTIFIER    

mscVrIpxNsRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.7.1
This entry controls the addition and deletion of mscVrIpxNs components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxNsRowStatusEntry

mscVrIpxNsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.7.1.1
A single entry in the table represents a single mscVrIpxNs component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxNsRowStatusEntry  

mscVrIpxNsRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.7.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxNs components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscVrIpxNsComponentName 1.3.6.1.4.1.562.36.2.1.100.7.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxNsStorageType 1.3.6.1.4.1.562.36.2.1.100.7.7.1.1.4
This variable represents the storage type value for the mscVrIpxNs tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxNsIndex 1.3.6.1.4.1.562.36.2.1.100.7.7.1.1.10
This variable represents the index for the mscVrIpxNs tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscVrIpxNsProvTable 1.3.6.1.4.1.562.36.2.1.100.7.7.10
The provisionable attribute group for the IpxNetSentry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxNsProvEntry

mscVrIpxNsProvEntry 1.3.6.1.4.1.562.36.2.1.100.7.7.10.1
An entry in the mscVrIpxNsProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxNsProvEntry  

mscVrIpxNsFirstFilter 1.3.6.1.4.1.562.36.2.1.100.7.7.10.1.1
First NetSentry filter for Ipx. If specified this filter is applied before any other NetSentry filters applicable to the packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscVrIpxNsLastFilter 1.3.6.1.4.1.562.36.2.1.100.7.7.10.1.2
Last filter for Ipx. If specified this filter is applied after all other NetSentry filters applicable to the packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscVrIpxNsLocalInFilter 1.3.6.1.4.1.562.36.2.1.100.7.7.10.1.3
The filter name of the NetSentry filter to be applied at the Local In filter point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscVrIpxNsLocalOutFilter 1.3.6.1.4.1.562.36.2.1.100.7.7.10.1.4
The filter name of the NetSentry filter to be applied at the Local Out filter point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscVrIpxNsNetSentryApp 1.3.6.1.4.1.562.36.2.1.100.7.7.2
OBJECT IDENTIFIER    

mscVrIpxNsNetSentryAppRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.7.7.2.1
This entry controls the addition and deletion of mscVrIpxNsNetSentryApp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxNsNetSentryAppRowStatusEntry

mscVrIpxNsNetSentryAppRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1
A single entry in the table represents a single mscVrIpxNsNetSentryApp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxNsNetSentryAppRowStatusEntry  

mscVrIpxNsNetSentryAppRowStatus 1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrIpxNsNetSentryApp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscVrIpxNsNetSentryAppComponentName 1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscVrIpxNsNetSentryAppStorageType 1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1.4
This variable represents the storage type value for the mscVrIpxNsNetSentryApp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscVrIpxNsNetSentryAppEntryIndex 1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1.10
This variable represents the index for the mscVrIpxNsNetSentryApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrIpxNsNetSentryAppProvTable 1.3.6.1.4.1.562.36.2.1.100.7.7.2.10
The Provisionable group for the IpxNetSentryApplyList.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrIpxNsNetSentryAppProvEntry

mscVrIpxNsNetSentryAppProvEntry 1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1
An entry in the mscVrIpxNsNetSentryAppProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscVrIpxNsNetSentryAppProvEntry  

mscVrIpxNsNetSentryAppFilter 1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.1
The name of the filter to be applied to packets matching the conditions in this entry of the IpxNetSentryApplyList.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscVrIpxNsNetSentryAppNetworkNumber1 1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.2
The first IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..11)  

mscVrIpxNsNetSentryAppNode1 1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.3
This attribute is the first IPX node address used to compare. This node number can be entered either as a dashed hex string or a string of hex digits. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..17)  

mscVrIpxNsNetSentryAppDirection 1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.4
Indicates the direction a packet must be moving between the first and second apply list entries in order for the entries to match. First 'to' second, first 'from' second, or first 'tofrom' second (either direction).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER to(1), from(2), tofrom(3)  

mscVrIpxNsNetSentryAppNetworkNumber2 1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.5
The second IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..11)  

mscVrIpxNsNetSentryAppNode2 1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.6
This attribute is the second IPX node address used to compared. This node can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..17)  

ipxGroup 1.3.6.1.4.1.562.36.2.2.28.1
OBJECT IDENTIFIER    

ipxGroupCA 1.3.6.1.4.1.562.36.2.2.28.1.1
OBJECT IDENTIFIER    

ipxGroupCA02 1.3.6.1.4.1.562.36.2.2.28.1.1.3
OBJECT IDENTIFIER    

ipxGroupCA02A 1.3.6.1.4.1.562.36.2.2.28.1.1.3.2
OBJECT IDENTIFIER    

ipxCapabilities 1.3.6.1.4.1.562.36.2.2.28.3
OBJECT IDENTIFIER    

ipxCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.28.3.1
OBJECT IDENTIFIER    

ipxCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.28.3.1.3
OBJECT IDENTIFIER    

ipxCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.28.3.1.3.2
OBJECT IDENTIFIER    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor